Scribd Logo
Upload

Welcome to Scribd!

  • SOP014 - Sewing Machine

    Uploaded by

    Raj Sekar
    1K views3 pages
    This standard operating procedure outlines safety protocols for operating a sewing machine. It identifies physical hazards like the reciprocating motion of the needle and recommends precautions like wearing safety glasses and keeping loose clothing and body parts away from the needle. The document provides steps for operating the sewing machine, which include checking for proper functioning, setting up the work piece and thread, and turning the machine on and off safely. It also includes waste management and spill/accident procedures.

    Original Description:

    Rajasekar

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This standard operating procedure outlines safety protocols for operating a sewing machine. It identifies physical hazards like the reciprocating motion of the needle and recommends precautions like wearing safety glasses and keeping loose clothing and body parts away from the needle. The document provides steps for operating the sewing machine, which include checking for proper functioning, setting up the work piece and thread, and turning the machine on and off safely. It also includes waste management and spill/accident procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    1K views3 pages

    SOP014 - Sewing Machine

    Uploaded by

    Raj Sekar
    This standard operating procedure outlines safety protocols for operating a sewing machine. It identifies physical hazards like the reciprocating motion of the needle and recommends precautions like wearing safety glasses and keeping loose clothing and body parts away from the needle. The document provides steps for operating the sewing machine, which include checking for proper functioning, setting up the work piece and thread, and turning the machine on and off safely. It also includes waste management and spill/accident procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    Standard Operating Procedure

    Title:_SOP-014 Sewing Machine


    PI: Art Erdman Lab Location: Mayo G217

    Issue Date: 7/9/13 Revision Date: 5/1/14

    Prepared by: Marlina Komarek Approved by: Rich Oliphant

    Hazard Identification:
    Physical Danger

    Exposure Assessment:
    Motions
     Reciprocating Motion
    The up-and-down motion of the sewing machine needle is a source of
    reciprocating motion. The needle could grip loose clothing, hair, or appendages
    which could result in severe injury. The needle’s sharp end could also cause
    serious harm to body or clothing.

    Actions
     Punching
    The punching action of the sewing machine is performed by the reciprocating
    motion of the needle. The quick punching action could cause serious injury if one
    is too close to the motion taking place. The punching action could also produce a
    small amount of dust depending on the work piece material.

    Control Plan:
     Read and become familiar with machine’s operating procedures before operating
     Always know where the power off switch is located in case of emergency
     Always wear safety glasses when operating this machine
     Machine should always be off when not in use
     Always disconnect the machine from the power source before servicing, repairing, or
    making any adjustments
     Do not wear gloves, necktie, jewelry, or loose clothing, as they could get caught in the
    reciprocating elements of the machine
     Always keep face and any other appendages a safe distance away from the needle when
    in operation
     Tie up long hair or wear protective hair covering to prevent hair from getting caught in
    the reciprocating elements of the machine.
    Experimental Procedures:
     Put on all safety equipment and tie back loose hair or clothing before operating
     Check to make sure all parts of machine are working and functioning properly
     Set up work piece for sewing, make sure sewing path is clearly visible
     Set up sewing machine with correct needle, thread, and desired sewing pattern (pattern
    options located on front face of machine)
    o See p. 11 in User Manual in Appendix for full instructions on threading the
    machine
     When ready, turn on sewing machine
    o Use foot pedal to control speed of needle in operation
     Sew work piece along desired path while keeping hands a safe distance away from the
    needle
     When finished, turn off sewing machine
     Unplug the machine, clean it, and put it back in the closet in its appropriate location
     Clean workspace as needed

    For other inquiries, see the User Manual in Appendix.

    Waste Management Procedures:


    When finished with this machine, always clean the area if necessary. Paper towels and cleaning
    solution can be found in G217-11.

    Place all materials back in the appropriate place.

    Spill and Accident Procedures:


    If an accident occurs, report immediately to the lab supervisor (G217-05) or other appropriate
    staff member. If no one is around, dial 911 on the landline phone near the door of G217-11 to
    reach the campus police. The lab first aid kit is located on the wall near the sink. A first aid
    pamphlet from DEHS is located in all of the MDC’s first aid kits.
    Appendix:

    You might also like