Koncept Design Consortium (P) LTD.

Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S22
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 3.50 2.50
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 9 SORRY.
Ly/Lx = 1.40 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 300 mm 6.00 Kn/m2
Live load 2.00 Kn/m2
. Total load (w) = 12.95 Kn/m2

ax(-ve) = 0.0000
ax(+ve) = 0.0710
ay(-ve) = 0.0000
ay(+ve) = 0.0560

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 0.00 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 8.62 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 0.00 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 6.80 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 1 of 88
 Effective Depth (d) required = 62 < 126
Overall Depth (D) required = 86 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 16.2 kN

tv = Vu/bd = 0.13 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 20.0 kN
(Where R=Ly/Lx) = 1.40
tv = Vu/bd = 0.16 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 2 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S22

12 tor
mm c/c
628
628
628
628

50.74 mm

OK
OK
OK
OK

Page 3 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 4 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S21
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 3.00 2.40
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 2 ONE SHORT EDGE DISCONT.
Ly/Lx = 1.25 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 2.00 Kn/m2
. Total load (w) = 6.95 Kn/m2

ax(-ve) = 0.0495
ax(+ve) = 0.0375
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 2.97 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 2.25 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 2.22 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 1.68 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 5 of 88
 Effective Depth (d) required = 60 < 126
Overall Depth (D) required = 84 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 8.3 kN

tv = Vu/bd = 0.07 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 9.6 kN
(Where R=Ly/Lx) = 1.25
tv = Vu/bd = 0.08 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 6 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S21

12 tor
mm c/c
628
628
628
628

29.80 mm

OK
OK
OK
OK

Page 7 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 8 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S20
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.75 2.60
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 4 TWO ADJACENT EDGES DISCONT.
Ly/Lx = 1.83 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 2.00 Kn/m2
. Total load (w) = 6.95 Kn/m2

ax(-ve) = 0.0862
ax(+ve) = 0.0649
ay(-ve) = 0.0470
ay(+ve) = 0.0350

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 6.07 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.57 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.31 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.47 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 9 of 88
 Effective Depth (d) required = 65 < 126
Overall Depth (D) required = 89 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 9.0 kN

tv = Vu/bd = 0.07 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 12.9 kN
(Where R=Ly/Lx) = 1.83
tv = Vu/bd = 0.10 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 10 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S20

12 tor
mm c/c
628
628
628
628

42.60 mm

OK
OK
OK
OK

Page 11 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 12 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S19
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.30 2.35
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.83 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 3.00 Kn/m2
. Total load (w) = 7.95 Kn/m2

ax(-ve) = 0.0796
ax(+ve) = 0.0609
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 5.24 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.01 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 2.44 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 1.84 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 175 287
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 13 of 88
 Effective Depth (d) required = 51 < 126
Overall Depth (D) required = 75 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 9.3 kN

tv = Vu/bd = 0.07 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 13.4 kN
(Where R=Ly/Lx) = 1.83
tv = Vu/bd = 0.11 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 14 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S19

12 tor
mm c/c
628
628
628
628

39.56 mm

OK
OK
OK
OK

Page 15 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 16 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S18
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.30 2.80
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.54 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 3.00 Kn/m2
. Total load (w) = 7.95 Kn/m2

ax(-ve) = 0.0686
ax(+ve) = 0.0523
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 6.41 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.89 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.46 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.62 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 17 of 88
 Effective Depth (d) required = 61 < 126
Overall Depth (D) required = 85 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 11.1 kN

tv = Vu/bd = 0.09 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 14.5 kN
(Where R=Ly/Lx) = 1.54
tv = Vu/bd = 0.12 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 18 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S18

12 tor
mm c/c
628
628
628
628

43.77 mm

OK
OK
OK
OK

Page 19 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 20 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S17
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 5.15 2.75
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.88 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 3.00 Kn/m2
. Total load (w) = 7.95 Kn/m2

ax(-ve) = 0.0812
ax(+ve) = 0.0621
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 7.32 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 5.60 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.34 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.53 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 21 of 88
 Effective Depth (d) required = 60 < 126
Overall Depth (D) required = 84 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 10.9 kN

tv = Vu/bd = 0.09 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 15.9 kN
(Where R=Ly/Lx) = 1.87
tv = Vu/bd = 0.13 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 22 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S17

12 tor
mm c/c
628
628
628
628

46.76 mm

OK
OK
OK
OK

Page 23 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 24 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S16
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 2.75 2.10
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.31 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 3.00 Kn/m2
. Total load (w) = 7.95 Kn/m2

ax(-ve) = 0.0576
ax(+ve) = 0.0443
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 3.03 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 2.33 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 1.95 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 1.47 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 25 of 88
 Effective Depth (d) required = 46 < 126
Overall Depth (D) required = 70 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 8.3 kN

tv = Vu/bd = 0.07 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 9.9 kN
(Where R=Ly/Lx) = 1.31
tv = Vu/bd = 0.08 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 26 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S16

12 tor
mm c/c
628
628
628
628

30.08 mm

OK
OK
OK
OK

Page 27 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 28 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S15
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 6.25 2.50
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 1 INTERIOR PANEL
Ly/Lx = 2.50 ONE-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 3.00 Kn/m2
. Total load (w) = 7.95 Kn/m2

ax(-ve) = 0.0646
ax(+ve) = 0.0487
ay(-ve) = 0.0320
ay(+ve) = 0.0240

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 4.81 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 3.63 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 2.39 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 1.79 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 29 of 88
 Effective Depth (d) required = 54 < 126
Overall Depth (D) required = 78 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 9.9 kN

tv = Vu/bd = 0.08 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 16.6 kN
(Where R=Ly/Lx) = 2.50
tv = Vu/bd = 0.13 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 30 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S15

12 tor
mm c/c
628
628
628
628

37.92 mm

OK
OK
OK
OK

Page 31 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 32 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S14
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 2.88 2.70
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 4 TWO ADJACENT EDGES DISCONT.
Ly/Lx = 1.07 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 5.00 Kn/m2
. Total load (w) = 9.95 Kn/m2

ax(-ve) = 0.0512
ax(+ve) = 0.0385
ay(-ve) = 0.0470
ay(+ve) = 0.0350

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 5.57 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.19 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 5.11 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 3.81 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 33 of 88
 Effective Depth (d) required = 67 < 126
Overall Depth (D) required = 91 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 13.4 kN

tv = Vu/bd = 0.11 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 14.0 kN
(Where R=Ly/Lx) = 1.06
tv = Vu/bd = 0.11 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 34 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S14

12 tor
mm c/c
628
628
628
628

40.79 mm

OK
OK
OK
OK

Page 35 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 36 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S13
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 3.80 2.70
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 2 ONE SHORT EDGE DISCONT.
Ly/Lx = 1.41 TWO-WAY
Assume D = 175 mm
Dead load of the slab = D*25 = 4.38 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 5.00 Kn/m2
. Total load (w) = 10.58 Kn/m2

ax(-ve) = 0.0552
ax(+ve) = 0.0413
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 6.38 210 239 374
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.78 210 239 374
My(-ve) = ay(-ve) *w*lx *1.5
2
= 4.28 210 239 374
My(+ve) = ay(+ve) *w*lx *1.5
2
= 3.24 210 239 374

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 175 mm
dx prov = 151 mm
dy prov = 143 mm Ast in mm^2/m
Provide 175 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.222

Area of c/s of steel required

fs =0.58*fy* = 212 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.85

Coefficient for max ratio of span/eff depth = 43

Page 37 of 88
 Effective Depth (d) required = 63 < 151
Overall Depth (D) required = 87 < 175

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 14.3 kN

tv = Vu/bd = 0.09 N/mm^2

pt% = 0.222
b= 13.08 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.35 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.25 (As per IS:456:2000:40.2.1.1)

k*tc = 0.43 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 17.7 kN
(Where R=Ly/Lx) = 1.41
tv = Vu/bd = 0.12 N/mm2

pt% = 0.222
b= 13.08 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.35 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.25 (As per IS:456:2000:40.2.1.1)

k*tc = 0.43 SAFE

Page 38 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S13

12 tor
mm c/c
539
539
539
539

43.67 mm

OK
OK
OK
OK

Page 39 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 40 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S12
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.69 3.80
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.24 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 5.00 Kn/m2
. Total load (w) = 9.95 Kn/m2

ax(-ve) = 0.0540
ax(+ve) = 0.0410
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 11.64 220 228 357
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 8.84 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 7.97 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 6.03 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 41 of 88
 Effective Depth (d) required = 95 < 126
Overall Depth (D) required = 119 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 18.9 kN

tv = Vu/bd = 0.15 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 21.6 kN
(Where R=Ly/Lx) = 1.23
tv = Vu/bd = 0.17 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 42 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S12

12 tor
mm c/c
514
628
628
628

58.96 mm

OK
OK
OK
OK

Page 43 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 44 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S11
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.60 2.65
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 1 INTERIOR PANEL
Ly/Lx = 1.74 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 5.00 Kn/m2
. Total load (w) = 9.95 Kn/m2

ax(-ve) = 0.0597
ax(+ve) = 0.0448
ay(-ve) = 0.0320
ay(+ve) = 0.0240

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 6.26 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.70 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.35 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.52 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 45 of 88
 Effective Depth (d) required = 66 < 126
Overall Depth (D) required = 90 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 13.2 kN

tv = Vu/bd = 0.10 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 18.4 kN
(Where R=Ly/Lx) = 1.74
tv = Vu/bd = 0.15 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 46 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S11

12 tor
mm c/c
628
628
628
628

43.24 mm

OK
OK
OK
OK

Page 47 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 48 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S10
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 3.80 3.53
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 1 INTERIOR PANEL
Ly/Lx = 1.08 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 5.00 Kn/m2
. Total load (w) = 9.95 Kn/m2

ax(-ve) = 0.0360
ax(+ve) = 0.0272
ay(-ve) = 0.0320
ay(+ve) = 0.0240

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 6.68 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 5.04 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 5.93 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 4.45 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 49 of 88
 Effective Depth (d) required = 88 < 126
Overall Depth (D) required = 112 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 17.5 kN

tv = Vu/bd = 0.14 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 18.4 kN
(Where R=Ly/Lx) = 1.08
tv = Vu/bd = 0.15 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 50 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S10

12 tor
mm c/c
628
628
628
628

44.66 mm

OK
OK
OK
OK

Page 51 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 52 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S9
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 2.88 2.75
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 2 ONE SHORT EDGE DISCONT.
Ly/Lx = 1.05 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Sunk= 0 mm 0.00 Kn/m2
Live load 5.00 Kn/m2
. Total load (w) = 9.95 Kn/m2

ax(-ve) = 0.0400
ax(+ve) = 0.0300
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 4.51 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 3.39 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 4.18 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 3.16 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 53 of 88
 Effective Depth (d) required = 69 < 126
Overall Depth (D) required = 93 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 13.7 kN

tv = Vu/bd = 0.11 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 14.1 kN
(Where R=Ly/Lx) = 1.05
tv = Vu/bd = 0.11 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 54 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S9

12 tor
mm c/c
628
628
628
628

36.72 mm

OK
OK
OK
OK

Page 55 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 56 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S8
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.70 2.70
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 1 INTERIOR PANEL
Ly/Lx = 1.75 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0600
ax(+ve) = 0.0450
ay(-ve) = 0.0320
ay(+ve) = 0.0240

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 5.87 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 4.40 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.13 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.35 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 175 287
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 57 of 88
 Effective Depth (d) required = 59 < 126
Overall Depth (D) required = 83 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 12.1 kN

tv = Vu/bd = 0.10 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 16.9 kN
(Where R=Ly/Lx) = 1.74
tv = Vu/bd = 0.13 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 58 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S8

12 tor
mm c/c
628
628
628
628

41.88 mm

OK
OK
OK
OK

Page 59 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 60 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S7
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 3.00 2.70
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 1 INTERIOR PANEL
Ly/Lx = 1.12 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0382
ax(+ve) = 0.0288
ay(-ve) = 0.0320
ay(+ve) = 0.0240

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 3.74 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 2.82 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.13 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.35 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 61 of 88
 Effective Depth (d) required = 67 < 126
Overall Depth (D) required = 91 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 12.1 kN

tv = Vu/bd = 0.10 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 12.9 kN
(Where R=Ly/Lx) = 1.11
tv = Vu/bd = 0.10 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 62 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S7

12 tor
mm c/c
628
628
628
628

33.42 mm

OK
OK
OK
OK

Page 63 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 64 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S6
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 2.70 2.65
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.02 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0384
ax(+ve) = 0.0290
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 3.62 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 2.73 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 3.49 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 2.64 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 65 of 88
 Effective Depth (d) required = 66 < 126
Overall Depth (D) required = 90 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 11.9 kN

tv = Vu/bd = 0.09 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 12.0 kN
(Where R=Ly/Lx) = 1.02
tv = Vu/bd = 0.10 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 66 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S6

12 tor
mm c/c
628
628
628
628

32.89 mm

OK
OK
OK
OK

Page 67 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 68 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S5
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.65 3.57
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.31 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0576
ax(+ve) = 0.0443
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 9.86 185 271 424
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 7.58 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 6.33 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 4.79 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 69 of 88
 Effective Depth (d) required = 78 < 126
Overall Depth (D) required = 102 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 16.0 kN

tv = Vu/bd = 0.13 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 18.9 kN
(Where R=Ly/Lx) = 1.30
tv = Vu/bd = 0.15 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 70 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S5

12 tor
mm c/c
610
628
628
628

54.26 mm

OK
OK
OK
OK

Page 71 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 72 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S4
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.40 3.57
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 4 TWO ADJACENT EDGES DISCONT.
Ly/Lx = 1.24 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0620
ax(+ve) = 0.0466
ay(-ve) = 0.0470
ay(+ve) = 0.0350

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 10.61 200 251 393
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 7.97 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 8.04 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 5.99 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 200 251
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 200 251
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 208 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.74

Coefficient for max ratio of span/eff depth = 40

Page 73 of 88
 Effective Depth (d) required = 89 < 126
Overall Depth (D) required = 113 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 16.0 kN

tv = Vu/bd = 0.13 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 18.3 kN
(Where R=Ly/Lx) = 1.23
tv = Vu/bd = 0.15 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 74 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S4

12 tor
mm c/c
566
628
628
628

56.29 mm

OK
OK
OK
OK

Page 75 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 76 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S3
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.68 4.36
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 1 INTERIOR PANEL
Ly/Lx = 1.08 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0360
ax(+ve) = 0.0272
ay(-ve) = 0.0320
ay(+ve) = 0.0240

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 9.19 180 279 436
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 6.94 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 8.17 180 279 436
My(+ve) = ay(+ve) *w*lx *1.5
2
= 6.12 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 175 287
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 77 of 88
 Effective Depth (d) required = 95 < 126
Overall Depth (D) required = 119 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 19.5 kN

tv = Vu/bd = 0.15 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 20.4 kN
(Where R=Ly/Lx) = 1.07
tv = Vu/bd = 0.16 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 78 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S3

12 tor
mm c/c
628
628
628
628

52.39 mm

OK
OK
OK
OK

Page 79 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 80 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S2
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.68 4.50
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 3 ONE LONG EDGE DISCON.
Ly/Lx = 1.04 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0398
ax(+ve) = 0.0300
ay(-ve) = 0.0370
ay(+ve) = 0.0280

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 10.82 204 246 385
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 8.16 180 279 436
My(-ve) = ay(-ve) *w*lx *1.5
2
= 10.06 203 248 387
My(+ve) = ay(+ve) *w*lx *1.5
2
= 7.61 180 279 436

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 175 287
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 182 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 2.00

Coefficient for max ratio of span/eff depth = 46

Page 81 of 88
 Effective Depth (d) required = 98 < 126
Overall Depth (D) required = 122 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 20.1 kN

tv = Vu/bd = 0.16 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 20.7 kN
(Where R=Ly/Lx) = 1.04
tv = Vu/bd = 0.16 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 82 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S2

12 tor
mm c/c
554
628
557
628

56.85 mm

OK
OK
OK
OK

Page 83 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 84 of 88
 Koncept Design Consortium (P) LTD. Project: HUDDA CO
CENTER SEC-21,PAN
Slab Type: Slab_
Subject: Design of slab_at First floor lvl.
S1
TWO WAY SLAB DESIGN

Lg. Span (Ly) Sh. Span (Lx)

Panal size = 4.85 4.50
fck = 25 N/mm2
fy = 500 N/mm2
Clear cover = 20 mm
EDGE COND. 4 TWO ADJACENT EDGES DISCONT.
Ly/Lx = 1.08 TWO-WAY
Assume D = 150 mm
Dead load of the slab = D*25 = 3.75 Kn/m2
Floor finishes= 50 mm 1.20 Kn/m2
Terrace= 125 mm 2.50 Kn/m2
Live load 1.50 Kn/m2
. Total load (w) = 8.95 Kn/m2

ax(-ve) = 0.0518
ax(+ve) = 0.0390
ay(-ve) = 0.0470
ay(+ve) = 0.0350

The Factored Moments are Moment At 8 tor 10 tor

in KNm in mm^2/m mm c/c mm c/c
Mx(-ve) = ax(-ve) *w*lx *1.5
2
= 14.08 268 187 293
Mx(+ve) = ax(+ve) *w*lx *1.5
2
= 10.60 200 251 393
My(-ve) = ay(-ve) *w*lx *1.5
2
= 12.78 261 193 301
My(+ve) = ay(+ve) *w*lx *1.5
2
= 9.51 192 262 410

d req = SQRT( (Mu*10^6)/(0.1339*fck*b) =

D prov = 150 mm
dx prov = 126 mm
dy prov = 118 mm Ast in mm^2/m
Provide 150 Ast for Mx (-ve) 8 tor @ 150 335
mm thk Ast for Mx (+ve) 8 tor @ 175 287
Ast for My (-ve) 8 tor @ 150 335
Ast for My (+ve) 8 tor @ 175 287
Check for Deflection :
Percentage of Tension renforcement = 0.266

Area of c/s of steel required

fs =0.58*fy* = 202 N/mm2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 23

Modification factor = 1.80

Coefficient for max ratio of span/eff depth = 42

Page 85 of 88
 Effective Depth (d) required = 108 < 126
Overall Depth (D) required = 132 < 150

Check for Shear :

At Short direction:
Vu (Short_dir) = Wu*Lx/3 = 20.1 kN

tv = Vu/bd = 0.16 N/mm^2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 21.2 kN
(Where R=Ly/Lx) = 1.08
tv = Vu/bd = 0.17 N/mm2

pt% = 0.266
b= 10.91 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)

k= 1.30 (As per IS:456:2000:40.2.1.1)

k*tc = 0.49 SAFE

Page 86 of 88
Project: HUDDA COMMUNITY
CENTER SEC-21,PANCHKULA
Slab Type: Slab_
S1

12 tor
mm c/c
421
566
434
590

64.86 mm

OK
OK
OK
OK

Page 87 of 88
 mm SAFE
mm SAFE

ut not less than 1

*root(1+5b)-1]/(6*b)

ut not less than 1

*root(1+5b)-1]/(6*b)

Page 88 of 88