S42 SXBrochure
S42 SXBrochure
Pump kit
Only the SX outriggers by SCHWING
Boom
allows the longstroke pump kit P2525 with
The turret can be rotated 370° in either
2.50 m long pumping cylinders to be used
direction and the tip section can rotate
in this class of machine, lowering the stroke
240° meaning that even the most deman-
rate to an unsurpassed level. Just like the
ding placement situations can mastered
maintenance costs.
effortlessly. And the robust construction
ensures a long service life.
R folding
*mounted on Mercedes-Benz
SX outriggers
The SX outriggers developed by
SCHWING combines high torsional
rigidity and excellent stability with
minimum space requirement. The
protected piston rod and internally
laid hydraulic lines prevent damage
and reduce service costs. At the
same time, the SCHWING SX outrig-
ger is the only system which allows
the installation of a low-wear long
stroke pump kit P2525.
Technical data
Performance
Pump kit P2023-110/75 P2023-110/75 P2525
Drive mm 535 636 636
Delivery cylinders l/min 230 x 2,000 230 x 2,000 250 x 2,500
Concrete output max. m3/h 136 161 162
Pressure on concrete max. bar 85 85 85
Stroke rate max. 1/min. 27 32 22
Concrete valve B-ROCK B-ROCK B-ROCK
Hydraulic system
Design open system
Hydraulic tank l 548
Boom
Delivery line DN 125
Length of end hose m 4.00
Vertical reach m 42.10
Reach depth m 27.60
Horizontal reach m 38.10
Net horizontal reach m 35.45
Number of boom sections 4
Height of joints (supported) m 4.16 / 14.46 / 23.71 / 32.96
Slewing range 2 x 370°
Folding height m 9.60
Support
Outrigger width, front m 8.30
Outrigger width, rear m 8.30
Outrigger load, front kN 240
Outrigger load, rear kN 220
10311060.low regulated.12.2015
Subject to technical and dimensional modifications. Illustrations are non-binding. The exact standard specification, the scope of delivery and the technical data are detailed in the offer.