Professional Documents
Culture Documents
Multiport Selector Valves Catalogue
Multiport Selector Valves Catalogue
SELECTOR VALVES
DAFRAM MULTIPORT SELECTOR VALVES
The compact solution for multiple wells test and measurement
DAFRAM S.p.A., founded in 1956, was the first company to manufacture floating ball valves in Italy. The long experience gathered during all these
years of activity ensures that Dafram is one of the most famous and competitive valve companies in the world.
The standard multiport selector valve (MSV) consists in one solid body with eight inlets and two outlets. On request multiple selector valves can be
produced with six, ten, twelve or sixteen inlets. The inlets may receive the flow of several lines from wells, whereas the last inlet is usually left free
for valve tightness testing and to allow serial connection of multiple MSVs. One of the outlets is common for production, the other outlet is for test
purposes. With this configuration seven or more wells are conveyed to the production header through a single body.
MAIN ADVANTAGES
• Reduced installation cost
Due to the compact design of the MSV the skid will be
smaller and lighter, leading to cost-effective solution. In
addition, the one operation point needs less automation
systems, making the skid more simple and reliable in the
long term use.
• Reduced operation cost
The reduced number of sub-system and automation leads
to lower operation, maintenance and ownership cost.
• Modular, compact and self contained
The multiport selector valve solution allows to install
multiple skids by connecting many MSVs in cluster style
production to a single main production pipe and only one
test line.
• Multiphase meter test on-line
The multiport selector valve skid configuration allows to
install a multiphase flow meter in-situ in order to perform
the well testing on the production allocation.
PRODUCTION
As a consequence of continuous product
development, DAFRAM’s workshop has
constantly being renewed. It utilizes the
most advanced manufacturing technologies
in valve components machining, drilling
and testing.
TESTING
In order to allow the best quality and customer’s
satisfaction DAFRAM’s production is 100% tested,
controlled and certified before leaving the plant.
A special seat design and the accurate machining
lead DAFRAM’s multiport selector valves to reach
the smallest leakage rates: on request ISO 5208
rate A leakage rate can be provided both on soft
and metal-seated valves.
When required special testing can be performed at
the minimum and maximum design temperatures
according to customized procedures.
PAINTING
Sandblasting and painting activities are both
performed by DAFRAM specialized personnel:
painting cycles and finished product controls can
be planned to customer’s specifications.
ACTUATION
The intelligent actuator is the heart of a multiport
selector valve. Selection, installation, registration
and functional test can be performed by DAFRAM
to have a complete control on product design.
Sizes and pressure range
ANSI classes from 150 to 2500
SpA
Registered office: via Tito Vignoli, 9
20146 Milano - Italy
Headquarters and plant:
S.S.78 - km 6 - 62010 Urbisaglia (Mc) Italy
Exit Macerata Ovest
Phone: +39.0733.51191
ma
Ro
Fax: +39.0733.50196
E-mail (general): [email protected]
E-mail (sales office): [email protected]
www.dafram.it