TruServ Poly Cupstock Product Guide Rev0217 PDF
TruServ Poly Cupstock Product Guide Rev0217 PDF
Food Contact Meets multiple national requirements for food contact packaging, e.g.,
US, Canada, Germany and the EU. Contact your sales representative for
information on specific markets and end uses.
ISEGA Certificate available.
Kosher documentation available.
Caliper (pts) U.S. 0.0070 0.0082 0.0093 0.010 0.0113 0.0124 0.0130 0.0150 0.0165 0.0180 .0180 0.020 inches T-411
Thickness Metric 178 208 236 254 287 315 330 381 419 457 457 508 microns T-411
Nominal U.S. 90 98 120 129 140 143 150 168 175 185 185 212 lbs/3000 sq ft T-410
Basis Weight Metric 147 160 195 210 228 233 244 274 285 301 301 345 gsm T-410
Moisture 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.7 6.7 6.5 6.5 percent T-412
Smoothness
Wire 175 200 130 130 175 280 180 225 260 280 280 270 mL/min T-538
Sheffield
Felt 185 215 120 120 160 300 165 190 225 230 190 250 mL/min T-538
Stiffness
MD 1.7 1.9 3.9 4.9 5.8 7.5 9.6 12.7 16.8 20.5 21.3 27.5 mNm T-489
Taber 15° (Metric)
CD 0.8 0.9 1.7 2.4 3.6 3.6 4.7 5.9 7.6 9.8 10.4 13.7 mNm T-489
Tear
MD 190 200 245 245 250 370 320 310 305 370 370 365 gf T-414
Elmendorf
CD 205 235 265 265 310 400 360 365 340 430 430 445 gf T-414
Stretch CD 4.3 6.0 6.0 6.0 5.6 5.8 5.0 5.0 5.4 5.0 5.0 4.7 percent T-494
Color
Hunter b 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 L-a-b T-524
Values are for basestock only. A variety of polymer structures and thicknesses are available.
Values are subject to change without notice.
westrock.com
Grade Availability & Typical Properties TruServ™
Caliper (pts) U.S. 0.0094 0.0109 0.0125 0.0129 0.0146 0.0161 0.0180 0.0183 0.0201 inches
Thickness Metric 238 278 318 328 370 410 460 465 510 microns
Nominal Basis U.S. 107 126 132 144 147 163 185 197 212 lbs/3000 sq ft
Weight Metric 175 205 215 235 240 265 301 320 345 g/m2
Moisture 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 percent
Smoothness
Felt 220 220 220 220 220 220 220 200 200 SU
Sheffield
Wire 200 200 210 210 270 270 270 270 270 SU
Stiffness
Elongation
MD 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 percent
CD 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 percent
Tensile
CD 30 40 40 40 45 50 55 50 60 lb. force/in.
Values are for basestock only. A variety of polymer structures and thicknesses are available.
Values are subject to change without notice.
For more information, please contact your WestRock representative or visit our website at westrock.com.
The information contained in this Product Guide is accurate to the best of WestRock’s knowledge and belief. It is intended, however, only as an introduction to the typical
properties of the product. WestRock disclaims any guarantee or warranty with respect to the accuracy of this information or, based on this document, with respect to the
suitability of the product for any particular use, including, but not limited to, the compliance of the product with laws, regulations, or standards. This information is subject
to change without notice.
Certificate Codes: SFI Certified Sourcing: NSF-SFI-CS-6S751, SFI CoC: NSF-SFICOC-6S751, PEFC: NSF-PEFCCOC-6S751, FSC Company Code: FSC-C104002
© 2017 WestRock Company. WestRock® and TruServ™ are trademarks of WestRock Company. All rights reserved worldwide.
westrock.com