Professional Documents
Culture Documents
Amberlite Ira743
Amberlite Ira743
AMBERLITE™ IRA743
Chelating Resin
AMBERLITE IRA743 is a unique ion exchange resin is not selective and therefore impractical. The
specifically designed and used to remove boric acid selectivity of AMBERLITE IRA743 for boric acid is
and borate from water, magnesium brine or other so high, that removal is very efficient irrespective of
solutions under a variety of conditions. the background salinity of the solution.
The presence of boron compounds, even in very AMBERLITE IRA743 owes its high selectivity for
small concentration, is frequently a concern in boric acid to a unique, sugar-like active group. The
potable and irrigation water, in ultrapure water as borate ion makes a very stable complex with the
used in the semiconductor industry, and in other glucamine group, whilst other anions do not react at
chemical processes. all.
Boric acid can be removed from water with
conventional ion exchange resins, but the exchange
PROPERTIES
Matrix_____________________________________ Macroporous polystyrene
Functional group ___________________________ N-Methylglucamine
Physical form_______________________________ Beige-coloured beads
Ionic form as shipped _______________________ Free Base (FB)
Total capacity ______________________________ 0.7 eq/L
Moisture holding capacity ____________________ 48 to 54 % (FB form)
Shipping weight ____________________________ 700 g/L (43.7 lbs/ft3)
Particle size
Harmonic mean size______________________ 0.500 – 0.700 mm
Uniformity coefficient ____________________ 1.6
< 0.300 mm _____________________________ 1 % max
180 90
60 °C
30 °C
160 80
Bed expansion (%)
140 70 40 °C
120 60
50 °C
100 50 60 °C
80 40
60 30
40 20
20 10
0
0 5 10 15 20 0 10 20 30 40 50 60
Backwash flow rate (m/h) Linear flow rate in m/h
Rohm and Haas/Ion Exchange Resins - Philadelphia, PA - Tel. (800) RH AMBER - Fax: (215) 409-4534
Rohm and Haas/Ion Exchange Resins - 75579 Paris Cedex 12 - Tel. (33) 1 40 02 50 00 - Fax : 1 43 45 28 19
AMBERLITE id a trademark of Rohm and Haas Company and affiliates, Philadelphia, U.S.A. (Rohm and Haas)
Ion exchange resins and polymeric adsorbents, as produced, contain by-products resulting from the manufacturing process. The user must determine the extent to which
organic by-products must be removed for any particular use and establish techniques to assure that the appropriate level of purity is achieved for that use. The user must
ensure compliance with all prudent safety standards and regulatory requirements governing the application. Except where specifically otherwise stated, Rohm and Haas does
not recommend its ion exchange resins or polymeric adsorbents, as supplied, as being suitable or appropriately pure for any particular use. Consult your Rohm and Haas
technical representative for further information. Acidic and basic regenerant solutions are corrosive and should be handled in a manner that will prevent eye and skin contact.
Nitric acid and other strong oxidizing agents can cause explosive type reactions when mixed with Ion Exchange resins. Proper design of process equipment to prevent rapid
buildup of pressure is necessary if use of an oxidizing agent such as nitric acid is contemplated. Before using strong oxidizing agents in contact with Ion Exchange Resins, consult
sources knowledgeable in the handling of these materials.
Rohm and Haas makes no warranties either expressed or implied as to the accuracy or appropriateness of this data and expressly excludes any liability upon Rohm and Haas arising
out of its use. We recommend that the prospective users determine for themselves the suitability of Rohm and Haas materials and suggestions for any use prior to their adoption.
Suggestions for uses of our products of the inclusion of descriptive material from patents and the citation of specific patents in this publication should not be understood as
recommending the use of our products in violation of any patent or as permission or license to use any patents of the Rohm and Haas . Material Safety Data Sheets outlining the
hazards and handling methods for our products are available on request.