Professional Documents
Culture Documents
Microeconomics I - Module-1-1 PDF
Microeconomics I - Module-1-1 PDF
Page
1.2 The Fundamental Economic Problems and the Alternative Economic Systems.......... 7
1.3 Scarcity, Opportunity Cost and Efficiency.……………………...…………………..12
1.4 Decision Making Units and the Circular Flow of Economic Activities ..................... 15
3.2 The Short Run Production Function and Stages of Production ................................ 109
3.4 Returns to Scale and Homogeneity of the Production Function …………...……... 122
4.2 The Relationship between Product Curves and Cost Curves in the Short Run ........ 147
UNIT INTRODUCTION
This unit tries to acquaint you with basic economic concepts and terminologies, which
are necessary to understand any subject of economics (particularly this one –
microeconomics). It attempts to present some reasons why you as a student learn
economics. The two fundamental facts, limited resources and unlimited wants, which
provide a reason for the existence of the subject of economics, are also briefly explained.
The unit will present the fundamental economic problems, which are common to all
countries, and how they are solved in different economic systems in some detail. The unit
will also provide an illumination of some basic concepts like scarcity of economic
resources, opportunity cost and efficiency. The circular flow of economic activities
presents how decision-making units interact in the market economy system. Towards its
end, the unit describes the concern of microeconomics.
UNIT OBJECTIVES
1
• Have an overview of the different types of market structure;
In this section, you will learn the foundation of economics, what economics is concerned
with, the relevance of economics to your daily lives, and its different classifications.
Economics is a word commonly used in our daily conversation. What is economics and
why do you need to learn economics? Before defining economics first let us try to see the
reasons why people want to study economics. Many people study economics for various
reasons. Some people want to study economics because they hope to make money. Some,
on the other hand, need to study economics because they feel illiterate if they cannot
know and understand the law of demand and supply. Many want to learn economics
because they want to know and understand how inflation and budget deficit will affect
their future life.
If someone enters into business, he/she will face many economic decisions like: what to
produce or what type of service to provide? How and in what quantity to produce? And
so on. Also in politics, we face many economic decisions like how much the nation
should spend on defense, on health care and environment, on education and on different
physical infrastructure? Even as a voter, we evaluate candidates partly on the basis of
their economic view. That is, on the basis of their view on unemployment, on inflation
and over all on their socio-economic programs.
2
In short, economic literacy is important because economic issues facing government and
individuals shape the future of the nation and affect the well being of its citizens.
Therefore, for these and the like reasons, it is essential that economics be made accessible
to everyone.
What is Economics?
Before defining economics, again, we better first introduce some terminologies which are
necessary for better understanding of the definition of economics.
A. Resources
Resource is anything that can be used to produce goods and services. Resources are also
called inputs or factors of production. Resources (factors or inputs of production) are
divided into four categories, namely:
i. Land
ii. Labor
iii. Capital
iv. Entrepreneurship
i. Land: is a natural gift, which includes all natural resources which are found inside and
on the surface of the land. These are like:
• Different minerals
• Soil, river, lake pond
• Timber or forest resources and other natural materials necessary to produce goods
and services.
ii. Labor: is mental and physical human effort (ability) used in the production process.
The skill and amount of labor will be important in determining level and quality of
production.
3
iii. Capital: capital is a man-made means of production used in the production process.
Here belong resources like:
• Machineries, equipments, tools used in the production process.
• Buildings and materials attached to it, and
• Financial capital
iv. Entrepreneurship: it is managerial skill of organizing and combining the above three
resources for production purposes. The above resources cannot be productive and be
changed into goods and services without the creative effort of entrepreneur.
Entrepreneur is an individual who organizes resources for production, introduces new
products or techniques of production.
The distinction between goods and services is based on whether the output (product) is
tangible or intangible. Tangible Outputs (Goods) are those like clothes, shoes, beverage,
automobile and the like. These goods are feasible and their existence can be sensed.
Intangibles Outputs (Services) are those like haircut, computer repairs, teaching and
consultation, and so on.
4
C. The Fundamental Economic Facts
There are two fundamental facts, which constitute the economizing problems and provide
foundation for the subject economics. These are unlimited wants and limited economic
resources.
Society's wants for material goods and services are unlimited: Our needs for goods and
services are insatiable or can not be fully satisfied because,
In general, people have insatiable desires for goods and services to raise their standard of
living.
Limited economic resources: Economic resources like various types of labor, natural
resources, capital and entrepreneurial ability we use to produce goods and services are
limited.
5
If economic resources are not sufficient to produce all goods and services needed by a
society, then we have to make choice as to which good to produce first.
Thus, unlimited wants and limited resources will give us the problem of scarcity.
Because of scarcity, economic resources must be allocated efficiently. Scarcity implies
that resources are insufficient to produce all goods and services desired by consumers or
society as a whole. To solve this and related issues we have a discipline called
Economics. Therefore, economics is the study of how scarce resources are allocated
among alternative and competing ends or uses in order to maximize the consumption of
material goods and services.
In addition to the above concepts, there are others which are very important in
understanding this course. Some of them are given below.
Microeconomics is the part of economics which studies the decision making process by
individuals (households) and by firms. It studies the behavior of individual components
of the economy like households and business firms.
Macroeconomics, on the other hand, is the part of economics which studies the behavior
of the economy taken as a whole. It deals with phenomenon at overall economy level
like: unemployment, inflation and national income. It studies the function of the economy
taken as a whole.
Positive Economics is that part of economic science which deals with specific statements
that are capable of verification, by reference to the facts about economic behavior. That
6
is, it is concerned with describing and analyzing the economy as it is. It is an economic
analysis strictly limited to make purely descriptive statements of scientific prediction. For
example, if the price of oil increases relative to all other prices, then the amount that
people will buy will fall. Here economics will tell us what will happen if some action is
taken.
Normative Economics, on the other hand, is analysis involving value judgment. It is that
part of economic science which involves someone’s value judgments about what the
economy should be like or what particular policy action should be recommended to solve
economic problems based on a given economic generalization or relationship. Here the
economics will tell us what should be done. For example, if the price of oil goes up,
people will buy less of it, therefore, we should not allow the price to go up. Such
statement is a normative economic statement.
The fundamental role of an economic system in any society is to provide a set of rules for
allocating resources and/or consumption among individuals who can't satisfy their wants,
given limited resources. The rules that each economic system provides function within a
framework of formal institutions (e.g., laws) and informal institutions (e.g., customs).
As we have mentioned earlier, because of scarcity, there must be a choice in the use of
economic resources. The important characteristics of economic resources are that they
7
can be put into alternative uses. Society, therefore, must choose the best ways of using
scarce resources. Nations, be it rich or poor, developed or underdeveloped, will all face
the problem of choice.
In every nation, no matter what the form of government, what the type of economic
system, who controls the government, or how rich or poor the country is, three basic
economic questions must be answered. They are:
i. What to produce?
ii. How to produce?
iii. For whom to produce?
What and how much will be produced? Literally, billions of different outputs could be
produced with society's scarce resources. Some mechanism must exist that differentiates
between products to be produced and others that remain as either unexploited inventions
or as individuals' unfulfilled desires.
How will it be produced? There are many ways to produce a desired item. It may be
possible to use more labor and less capital, or vice versa. It may be possible to use more
unskilled labor to substitute for fewer units of skilled labor. Choices must be made about
the particular input mix, the way the inputs should be organized, how they are brought
together, and where the production is to take place.
For whom will it be produced? Once a commodity is produced, some mechanism must
exist that distributes finished products to the ultimate consumers of the product. The
mechanism of distribution for these commodities differs by economic system.
Historically, four different types of economic systems are observed. These are:
1. Pure Capitalism (Free Market Economy)
2. Pure Socialism (Command Economy)
3. Mixed Economy (Hybrid Economy)
4. Traditional Economy (Customary Economy)
8
Market versus Command Economic Systems
One way to define economic systems is to classify them according to whether they are
market systems or command systems. In a market system, individuals own the factors of
production and individually decide how to use them. The cumulative decisions of these
individuals are reflected in constantly changing prices, which result from the supply and
demand for different commodities and, in turn, impact that supply and demand. The
prices of those commodities are signals to everyone within the system indicating relative
scarcity and abundance. Indeed, it is the signaling aspect of the price system that provides
the information to buyers and sellers about what should be bought and what should be
produced.
In a market system the interaction of supply and demand for each good determines what
and how much to produce. For example, if the highest price that consumers are willing to
pay is less than the lowest cost at which a good can be produced, output will be zero.
That doesn't mean that the market system has failed. It merely implies that the demand is
not high enough in relation to supply to create a market; however, it might be someday.
In a market economy the efficient use of scarce inputs determines how output will be
produced. Specifically, in a market system, the least-cost production method will have to
be used. If any other method was used, firms would be sacrificing potential profit. Any
firm that fails to employ the least-cost technique will find that other firms can undercut
its price. That is, other firms can choose the least-cost or any lower-cost production
method and be able to offer the product at a lower price, while still making a profit. This
lower price will induce consumers to shift purchases from the higher-priced firm to the
lower-priced firm, and inefficient firms will be forced out of business.
In a market system, individuals make the choice about what is purchased; however,
ability to pay, as well as the consumer's willingness to purchase the good or service,
determine that choice. Who gets what is determined by the distribution of money income.
In a market system, a consumer's ability to pay for consumer products is based on the
9
consumer's money income. Money income in turn depends on the quantities, qualities,
and types of the various human and non-human resources that the individual owns and
supplies to the resource market. It also depends on the prices, or payments, for those
resources. When you are selling your human resources as labor services, your money
income is based on the wages you can earn in the labor market. If you own non-human
resources – capital and land, for example – the level of interest and rents that you are paid
for your resources will influence the size of your money income, and thus your ability to
buy consumer products.
Critics commonly argue that in a market system the rich, who begin with a
disproportionately large share of resources, tend to become richer while the poor, who
begin with a disproportionately small share of resources, tend to become poorer. They
further argue that a government, which is designed to protect private-property rights, will
tend to be exploited by those in power, which tends to be the economically wealthy.
These critics argue that a market economy leads to selfish behavior rather than socially
desirable outcomes.
In a command system the central planners determine what and how much will be
produced by first forecasting an optimal level of consumption for a future period and then
specifically allocating resources projected to be sufficient to support that level of
production. The "optimal" level of production in a command economy is determined by
the central planners and is consistent with government objectives rather than being a
function of consumer desires.
10
As a part of the resource allocation process, the central planners also determine how
production will take place. This process could focus on low-cost production or high
quality production or full-employment of relatively inefficient resources or any number
of other governmental objectives.
Finally, the command system will determine for whom the product is produced. Again,
the focus is on socially-desirable objectives. The product can be allocated based on class,
on a queuing process, on a reward system for outstanding or loyal performance, or on any
other socially-desirable basis for the economy.
Critics commonly argue that because planned economies cannot effectively process as
much relevant information as a market does, command economic systems cannot
coordinate economic activity or satisfy consumer demand as well as market forces do.
For example, consider an economic planning board of twenty people that must decide
how many coats, apartment buildings, cars, trains, museums, jets, grocery stores, and so
forth should be built in the next five years. Where should these planners begin? How
would they forecast the future need for each of these?
Critics argue that, at best, planners would make a guess about what goods and services
would be needed. If they guess wrong, resources would be misallocated and too much or
too little production would take place. These critics argue that private individuals, guided
by rising and falling prices and by the desire to earn profits, are better at satisfying
consumer demand.
In practice, most economies blend some elements of both market and command
economies in answering the three fundamental economic questions: What and how much
will be produced? How will it be produced? For whom will it be produced? Furthermore,
within any economy, the degree of the mix will vary.
11
The economy of the United States is generally considered to be a free market or capitalist
economic system. However, even in the United States the government has determined a
"minimum wage", has set rules and regulations for environmental protection, has
provided price supports for agricultural products, restricts the imports of items that might
compete with local production, restricts the exports of sensitive output, provides for
public goods such as a park system, and provides health and retirement services through
Medicaid and Medicare. All of these detract/depart from the essential nature of a
capitalist economy. However, most decisions continue to be left to free markets, leaving
the United States as a mixed economy that leans heavily toward the capitalist economic
system.
If human desire were fully satisfied, we don't need to worry about the efficient use of
resources. Because all of us could have as much as we please and no one would care
about the distribution of income among people. But, the reality is somewhat different.
Because, we cannot have all we want from nature with out sacrifices. The law of scarcity
states that goods are scarce because there are no enough resources to produce all the
goods that people want to consume. This implies that there is always a tradeoff between
alternative choices.
As we have mentioned it earlier, because of scarcity, there must be a choice in the use of
economic resources. The important characteristics of economic resources are that they
can be put into alternative uses. Societies or individuals, therefore, must choose the best
12
ways of using scarce resources. Nations be it rich or poor, developed or under developed,
will all face the problem of choice. Tradeoff here implies the economy can only produce
more of one item if it gives up the production of some other good(s). The value of trade
off is called opportunity cost. Opportunity Cost is the value (amount) that must be
sacrificed to attend something.
That is,
the amount sacrificed of one good
Opportunity Cost =
the amount obtained of other good
Although opportunity cost can be hard to quantify, the effect of opportunity cost is
universal and very real on the individual level. In fact, this principle applies to all
decisions, not just economic ones. Since the work of the Austrian economist Friedrich
von Wieser, opportunity cost has been seen as the foundation of the marginal theory of
value.
Opportunity cost is one way to measure the cost of something. Rather than merely
identifying and adding the costs of a project, one may also identify the next best
alternative way to spend the same amount of money. The forgone profit of this next best
alternative is the opportunity cost of the original choice. A common example is a farmer
that chooses to farm his land rather than rent it to neighbors, wherein the opportunity cost
is the forgone profit from renting. In this case, the farmer may expect to generate more
profit himself. Similarly, the opportunity cost of attending university is the lost wages a
student could have earned in the workforce, rather than the cost of tuition, books, and
other requisite items (whose sum makes up the total cost of attendance).
Note that opportunity cost is not the sum of the available alternatives, but rather the
benefit of the single, best alternative. Possible opportunity costs of the city's decision to
build the hospital on its vacant land are the loss of the land for a sporting center, or the
inability to use the land for a parking lot, or the money that could have been made from
selling the land, or the loss of any of the various other possible uses—but not all of these
13
in aggregate. The true opportunity cost would be the forgone profit of the most lucrative
of those listed.
One question that arises here is how to assess the benefit of dissimilar alternatives. We
must determine a dollar value associated with each alternative to facilitate comparison
and assess opportunity cost, which may be more or less difficult depending on the things
we are trying to compare. For example, many decisions involve environmental impacts
whose dollar value is difficult to assess because of scientific uncertainty. Valuing a
human life or the economic impact of an Arctic oil spill involves making subjective
choices with ethical implications.
Efficiency occurs when the economy is using its resources so well that producing more of
one good results in less of other goods, i.e., no resources are being wasted. Note that the
employment of all available resources is insufficient to achieve efficiency. Full
production must also be realized. Full production implies two kinds of efficiency:
allocative efficiency and productive efficiency. Allocative efficiency means that
resources are being devoted to those combinations of goods and services most wanted by
society. In addition, productive efficiency is realized when the desired goods and services
are produced in the least costly ways. Thus, full production means producing the “right
goods” (allocative efficiency) in the “right way” (productive efficiency).
Activity 1
14
1.4 DECISION MAKING UNITS AND THE CIRCULAR FLOW OF
ECONOMIC ACTIVITIES
Households: Households are consumers of final goods and services produced in the
economy. Consumers are the owners of economic resources (land, labor, and capital and
entrepreneurship). They earn income from their labor and from the property they own.
Households are generally assumed to maximize their well-being or what economists call
"utility”.
Business Firms: Business firms are the producing unit in the economy. They hire
workers and pay for the use of various property owned by households. They use
economic resources to produce goods and services needed by households and other firms.
Firms come in all size and forms. However, regardless of their size all firms share
common objective, i.e. profit maximization.
Government: The term government used to broadly include all government and quasi-
government bodies at the federal, state and local levels. Unlike the households and
business firms, government is not assumed to have a single goal. In a pure market
economy, the role of the government is limited to such activities as law entertainment.
Generally, how the market economic system functions can be shown using the simple
model called circular flow diagram depicted in Figure 1.1 below.
The circular flow diagram tries to illustrate how an economic system works and how
solutions to the basic economic problems are made. It also captures the interrelationship
between resource markets and product markets. Households need goods and services on
15
which they spend their income. Business firms need economic resources (owned by
households) to produce goods and services needed by households.
To buy goods and services, households will sell their economic resources (labor, capital,
land and entrepreneur skill) and generate income which will be spent on goods and
services produced by business firms as shown in Figure 1.1 below.
Business firms will pay for the resources in the resource market in the form of wage (for
the labor resource), interest rate (for capital) and rent (for land), and use these resources
to produce goods and services demanded by households. There are two different markets
in the diagram: resource market and product market.
In the resource market economic resources are traded. From the resource market, money
in the form of consumers' income flow to households and economic resources flow to
business firms. Similarly in the product market, money income in the form of revenue
flow to business firms and goods and services flow to households. Generally, both
households and firms participate in both markets but on different side of each, once as a
demander then as a supplier. Households are suppliers in the resource market and
demanders in the product market; firms are demanders in the resource market and
suppliers in the product market.
16
Firms’ Expenditure on
Economic Resources Resource Income to Resource Owners
Market
Business
Firms Households
Product
Markets
Consumption Expenditure
Revenue of Firms
Market is a place or condition in which buyers and sellers meet to exchange goods and
services for the price they agree on. In the theory of the firm we are concerned with the
question: “How are prices of commodities determined in the market?” The determination
of price of a commodity depends on the number of sellers and buyer in the market. The
number of buyers and sellers determine the nature and degree of competition in the
market.
17
The nature and degree of competition makes or creates the structure of the market. Thus,
the market structure is determined or defined by the nature and degree of competition in
market.
Depending on the number of sellers and the degree of competition, the market structure is
broadly classified as follows.
1. Perfect competition (competitive market), and
2. Imperfect markets (noncompetitive markets). Here belong market structures of:
a. Monopoly,
b. Monopolistic competition, and
c. Oligopoly.
This particular course gives focus only to the perfectly competitive and monopoly
markets and how prices of goods and services are determined in these market structures.
Microeconomics (or price theory) is a branch of economics that studies how individuals,
households, and firms make decisions to allocate limited resources in consumption and/or
production.
One of the goals of microeconomics is to analyze the market mechanisms that establish
relative prices amongst goods and services, and the allocation of limited resources
amongst many alternative uses. Microeconomics also analyzes market failure, where
markets fail to produce efficient results, as well as describing the theoretical conditions
needed for perfect competition. Significant fields of study in microeconomics include
general equilibrium, markets under asymmetric information, choice under uncertainty
and economic applications of game theory. Also considered is the elasticity of products
within the market system.
18
This course (Microeconomics I) deals with the price theory, where the price system plays
the fundamental role of determining what to produce, how to produce, and for whom to
produce. In the units to follow, we will analyze the behaviors of consumers (Unit Two)
and firms (Units Three and Four) separately. Units Five and Six bring the two economic
units, consumers and producers, in perfectly competitive and purely monopolistic market
structures.
Activity 2
UNIT SUMMARY
19
# Economics is, therefore, the study of how scarce resources are allocated among
alternative and competing ends in order to maximize the consumption of goods and
services.
# The basic divisions in economics are microeconomics and macroeconomics.
Microeconomics studies the behavior of individual components of the economy:
households and business firms. Macroeconomics, on the other hand, deals with
issues at the overall economic level like unemployment, inflation and national
income. Economics can be positive or normative. Positive economics is limited to
making purely descriptive statements of scientific prediction. Normative economics
involves value judgments and it tells us what should be done.
# The three major or fundamental problems of economics are what to produce, how to
produce, and for whom to produce. These problems are universal to all countries
regardless of their level of development. However, different countries having
different economic system use different approach to solve them. Economic systems
are different from each other on the basis of the ownership of economic resources
and the method by which economic activities are coordinated. The four economic
systems are free market economy, command economy, mixed economy and
traditional economy system.
# Opportunity cost is the amount of one product, which must be given up to obtain
additional unit of another product. Efficiency occurs when the economy is using its
resources so well that producing more of one good results in less of other goods,
i.e., no resources are being wasted. But full production must also be realized. Full
production means producing the “right goods” (allocative efficiency) in the “right
way” (productive efficiency).
# Households, business and government are the major decision-making units of an
economy. While households attempt to maximize their utility, firms seek to
maximize their profits. The link between them is shown by the circular flow
diagram.
20
SELF-TEST QUESTIONS
21
d. All of the above
e. None of the above
6. Which of the following is not true about the roles of entrepreneur?
a. Determines the price of the commodity
b. Takes risk
c. Introduces new technology
d. Introduces new product
e. None
7. If the amount of a commodity available at zero price could fully satisfy the human
need, then this good is a/an:
a. Free good
b. Economic good
c. Scarce good
d. Efficient good
e. None
8. Macroeconomics is a branch of economics which deals with:
a. Price determination of the individual sellers/firms
b. The level of total output in the economy as a whole
c. Movements in the overall price level (inflation)
d. ‘b’ and ‘c’
e. ‘a’ and ‘b’
1. Scarcity is ever present because every economy faces the problem of not having
enough resources to produce all the goods and services that people want.
2. A market system always produces the combination and amounts of goods that are
best for society.
22
III. Discussion Questions
1. What are the fundamental (basic) problems of economies? How are these problems
solved?
2. How do you relate the concepts of scarcity, opportunity cost and efficiency to one
another and to the discipline of economics?
23
UNIT TWO
UNIT INTRODUCTION
As it has been mentioned in the first unit, there are three decision making units in
economics and they are households (the primary consuming units), firms (the primary
producing units) and government. As you recall from the topic “Alternative Economic
Systems” of unit one, the decision making units in a pure market economy are
households and firms. Hence, in order to understand the pure market system it is better to
analyze the behavior of households and firms. Thus, in this unit we will study the
behavior of households (consumers) under the “Theory of Consumer Behavior “and in
the next two units we will be concerned with the behavior of firms under “The Theories
of Production and Costs”.
In a given economy it is a must to find a market for a commodity. And in any market we
find the demanders as well as the suppliers. Hence, there is a need to study about the
markets so as to know the behavior of the economy; and, in order to know about the
market, it is necessary to deal with the components of the market, i.e., demanders and
suppliers.
UNIT OBJECTIVES
This unit has a general objective of enabling you know how consumers decide on baskets
of goods and services to maximize their satisfaction. The specific objectives of the unit
are:
# Help you know the basis of the theory of demand;
# Enable you derive a consumer’s demand under some alternative sets of
information;
# Enable you know the concepts of utility and preferences;
24
# Help you understand different types of utility functions;
# Help you understand the determinants of individual and market demands, and the
concept of elasticity.
Before looking at what the theory of consumer behavior is all about, let’s first see what a
consumer is.
The analysis of the demand side and the supply side of the market involves the study of
the behaviors of households (demanders of final goods and services in the product
market) and firms (suppliers of final goods and services in the product market). Thus, the
rational for studying the theory of consumer behavior is the fact that it is the basis for the
theory of demand. This is because the market demand is assumed to be the horizontal
summation of the demand of the individual consumers. That means, we first analyze the
behavior of a consumer to determine the individual demand, and then stepping on the
demand of an individual consumer we will develop the market demand.
25
However, in our attempt to study the behavior of the consumer, we deal with the
traditional demand theory which has the following important features.
# The traditional theory of demand examines only the final consumer’s demand for
durables and non- durables. It deals only with consumers’ demand, i.e., it does not
deal with the demand for investment good, nor with the demand for intermediate
products.
# It examines the demand in one market in isolation without considering the
conditions of demand in other markets (what is referred to as partial equilibrium
analysis).
# It also assumes that firms sell their product directly to the final consumers.
In order to determine the various factors that affect demand we need to deal with the
theory of demand. As demand is a multivariate relationship determined by many factors
simultaneously, we need to go beyond the law of demand which states that there is
negative relationship between market demand and price under the assumption of ceteris
paribus (other things remaining constant). All those important determinants of demand
are related with the behavior of the consumer. Thus, the traditional theory of demand
starts with the behavior of a consumer.
Under the theory of consumer behavior, the following important assumptions are made:
1. The consumer is assumed to be rational. Given his/her income and the market
prices of the commodities, he/she spends his/her income on the basket of goods and
services that give the highest possible satisfaction or utility. This is the
axiom/postulate of utility maximization.
2. It is also assumed that the consumer has all relevant information important for
his/her decision. This means that the consumer has perfect knowledge about his/her
income, complete knowledge of the available commodities in the market, and exact
knowledge of the prices of all available commodities in the market.
26
At this point it is important to mention that the theory of consumer behavior in this unit
will be dealt with in two parts. The first part is in line with the second assumption which
considers that the consumer has full knowledge of all the information relevant to his/her
decision. The second part relaxes this assumption and tries to involve the possibility of
the existence of uncertainties in the market. In short, the first part deals with the behavior
of the consumer under the condition of certain information (Choice under certainty),
while the second part is concerned with choice under uncertainty.
Understanding the consumers’ purchasing decisions will help us understand how changes
in income and prices affect demands for goods and services, and why the demands for
some products are more sensitive than others to changes in prices and income. In general,
as it has been mentioned above, we study the theory of consumer behavior since it is the
basis for the theory of demand.
We have said that consumers are the primary consuming units with an objective of
maximizing their utility/satisfaction. In order to attain this objective, the consumer must
be able to compare the utility/satisfaction of the various baskets of goods and services
which he/she can buy with his/her income.
Utility is defined as the level of satisfaction/pleasure that the consumer can derive from
consumption of goods and services or by undertaking a certain activity. It is the power of
a good or service to satisfy a certain human need.
There are two basic approaches to the problem of comparison of utilities. These
approaches are:
1. The Cardinalist Approach, and
2. The Ordinalist Approach.
27
In this section, we will examine the two approaches one by one. In each case, we first
state the assumptions underlying the approach, and then derive the equilibrium of the
consumer. From this equilibrium of the consumer, we will determine the demand for
individual products which will help us establish the market demand for the commodity.
Finally, we will point out the critics of each approach. Let’s first see the Cardinalist
Approach.
There are some theories of utility that attach significance to the magnitude of utility.
These are known as Cardinal Utility Theories.
The cardinalist school postulates that utility can be measured. The advocates of this
school have given various suggestions for the measurement of utility. With the
assumption of complete knowledge of market conditions and income levels over the
planning period i.e. under certainty, some economists have suggested that utility can be
measured in monetary units, say, by the amount of money the consumer is willing to
sacrifice for another unit of a commodity. And others suggested the measurement of
utility in subjective units, called Utils.
Thus, in a theory of cardinal utility, the size of the utility difference between two bundles
of goods and services is supposed to have some sort of significance.
In its attempt to reach at the equilibrium of the consumer, the cardinal utility approach
makes the following assumptions.
28
him/her the highest possible level of satisfaction, and then move to the next best,
and so on.
2. Cardinal Utility: The utility of each commodity is measurable. It is assumed that
utility is a cardinal concept. The most convenient measure of utility is money: the
utility is measured by the monetary units that the consumer is willing to pay for
another unit of the commodity.
3. Constant Marginal Utility of Money: This assumption is necessary if the monetary
unit is used as the measure of utility. The essential feature of a standard unit of
measurement is that it is constant. If the marginal utility of money changes as
income changes (increase or decrease) the measuring rod for utility becomes, like
an elastic ruler, inappropriate for measurement.
4. Diminishing Marginal Utility of Commodities: The utility gained from successive
units of a commodity diminishes. In other words, the marginal utility of a
commodity diminishes as the consumer consumes larger quantities of it. This is
what is referred to as the axiom of diminishing marginal utility.
5. The Total Utility of a Basket of Goods and Services Depends on the Quantities of
the Individual Commodities. For example , if there are n commodities in the bundle
with quantities x1, x2,…………,xn, the total utility is given by:
U = f(x1, x2,…………,xn)
6. Additivity of Utility: In very early version of the theory of consumer behavior, it
was assumed that the total utility is additive. This means, if there are n commodities
in the bundle with quantities x1, x2,…………,xn, the total utility is:
U = u1(x1) + u2(x2) + ………+un (xn)
However, the additivity assumption is dropped in later versions of the cardinal
utility theory because additivity implies independent utilities of the various
commodities in the bundle, and this is an assumption which is clearly unrealistic
and unnecessary for the cardinal utility theory.
29
Equilibrium of the Consumer under the Cardinal Utility Theory
Let’s begin our analysis of the equilibrium of the consumer with a simple model of a
single commodity, X. The consumer has two alternatives for the use of his/her income:
either to buy X or retain the money income, Y. Under this condition, the consumer is in
equilibrium (at the highest possible level of satisfaction) when the marginal utility of X is
equal to its market price (Px). Marginal utility of a commodity is the extra satisfaction
that one can derive from one additional unit of the commodity.
If the marginal utility of X is greater than its price (MUx > Px), the consumer can
increase his/her welfare by purchasing more units of the commodity X. Similarly, if the
marginal utility of the commodity is less than its price, the consumer can increase his/her
total satisfaction by cutting down the quantity of the commodity X and keeping more of
his/her income unspent. Therefore, the consumer attains the maximum level of
satisfaction (utility) when MUx = Px.
So far, for the sake of simplicity we have been assuming that there is only one
commodity. However, in reality, since the consumer may consume more than one
commodity, we can extend our analysis of the consumer into the case of many
commodities. If there are more commodities, the condition for the equilibrium of the
consumer is the equality of the ratios of the marginal utilities for the individual
commodities to their prices.
30
MU X MU Y MU Z MU N
= = =…=
PX PY PZ PN
If price of the commodity is Px and the consumer buys Qx units of commodity X, the
expenditure of the consumer will be the product, PxQx. Hence, the consumer wants to
maximize the difference between his/her utility and his/her expenditure.
i.e, Maximize (U- PxQx)
In order to maximize the above mentioned difference there is necessary condition as well
as sufficient condition. The necessary condition is that the partial derivative of the
function with respect to Qx be equal to zero.
Thus,
∂U ∂ ( PX Q X )
– =0
∂Q X ∂Q X
By rearranging the above expression we obtain:
∂U ∂ ( PX Q X )
= , but since price is constant we can factor it out and find
∂Q X ∂Q X
∂U P ∂Q 1
= X X
∂Q X ∂Q X
∂U
= PX
∂Q X
MU X = PX
1 ∂Q X ∂U
= 1 and only Px will be remaining on the right hand side, and is marginal
∂Q X ∂Q X
utility of the commodity (X) which is the slope of total utility.
31
In the case of several commodities, the utility derived from spending an additional unit of
money must be the same for all commodities. If the consumer derives greater utility from
any one commodity, he/she can increase his/her welfare by spending more on that
commodity and less on the others, until the above equilibrium condition is fulfilled.
The derivation of demand is based on the axiom of diminishing marginal utility. As it has
been mentioned above, the marginal utility of a commodity (MUx) is the slope of the
total utility of the commodity (U=f(Qx)). Total utility is the total amount of satisfaction
that one can derive from the use of a certain bundle of goods and services or by
undertaking a certain activity.
Total utility of a commodity (X), TUx, increases, but at a decreasing rate initially up to a
certain level of quantity, let’s say X1, and then starts declining. Thus, this implies that
TUx is at its maximum point at X1 units of quantity (See Figure 2.1). Accordingly, the
marginal utility of the commodity (MUx) declines continuously when TUx increases at a
decreasing rate, and becomes negative beyond quantity X1 i.e MUx is zero at the
maximum point of TUx. Thus, the marginal utility of a commodity is depicted by a
negatively sloped line (See Figure 2.2).
Geometrically, marginal utility of a commodity is the slope of the total utility function
U = f (X). That means, marginal utility of a commodity is an extra satisfaction as a result
of one unit increase in the consumption of the commodity.
Mathematically, given total utility function U = f (X), Marginal utility of the function is
given by:
d (TU X )
MU = Where: MUx is the marginal utility of commodity
d(X )
X, d(TUx) is change in the total utility of commodity X, and d(X) is change in the
quantity of X consumed.
32
TUx
TUx
X1 X
Figure 2.1: Total Utility Function
MUx
X1 X
MUx
NB. The slope of a tangent line to total utility function gives marginal utility of the
commodity at that point. Hence, as can be seen on Figure 2.1 above the tangent lines on
the total utility function are becoming flatter and flatter with increase in consumption of
X. This implies that the slopes of the tangent lines, which are the slope of the total utility
function, are declining with increase in consumption of the commodity.
If the marginal utility is measured in monetary units the demand curve for commodity X
is identical to the positive segment of the marginal utility curve since marginal utility of
the commodity is equal to price of the commodity (MUx = Px). As depicted in Figure
2.3a below, at quantity level X1 the marginal utility is MU1 which is equal to the price
level P1 by definition. Hence, at the price level P1 the consumer demands X1 units of he
commodity (Figure 2.3b). Similarly, at X2 the marginal utility of the commodity is MU2,
33
which is equal to P2. Hence, at P2 the consumer will buy X2 units of the commodity, and
so on. Thus, we can observe that Figure 2.3b shows the demand curve which is derived
from the marginal utility function of a commodity (Figure 2.3a)
MUx P
MUX1 P1
MUX2 P2 Demand
Curve
MUX3 P3
O X1 X2 X3 X X
O X1 X2 X3
MUx
NB. The negative section of the MUx curve does not form part of the demand curve since
negative prices do not make sense in economics.
34
b) The assumption of constant utility of money is also unrealistic. As income increases
the marginal utility of money changes. Thus, money can not be used as a measuring
rod for utility since its own utility changes.
c) The additivivty of utility is questionable since there is no objective measure of
utility.
Activity 3
The ordinalist school postulates that utility is not measurable, but is an ordinal
magnitude. The consumer need not know in specific the utility of various commodities to
make his/her choice. Under this approach, it suffices for the consumer to be able to rank
the various baskets of goods and services according to the satisfaction that each bundle
gives him/her. The consumer must be able to determine his/her order of preference
among the different bundles of goods and services.
The indifference curves theory is one of the theories which argues that utility is not
cardinally measured rather it is ordinally measured. This theory tries to show the
35
equilibrium of the consumer using the concept of indifference curves as the name
suggests.
36
If A > B, then B ≯A.
Similarly, it is assumed that consumer’s choices are characterized by transitivity: if
bundle A is preferred to B and B is preferred to C, then bundle A is preferred to C.
Symbolically, we may write the transitivity assumption as follows:
To define the equilibrium of the consumer (that is his/her choice of the bundle that
maximises his/her utility) we must introduce two concepts:
¾ the indifference curve and its slope which is the marginal rate of substitution, and
¾ the budget line.
These are the basic tools of the indifference curves theory.
Indifference
Curve
O X
37
An Indifference Map shows a set of indifference curves which rank the preferences of
the consumer. Combinations of goods situated on an indifference curve yield the same
level of satisfaction for the consumer.
However, combinations of goods lying on a higher indifference curve yield higher level
of satisfaction and are preferred. Combinations of goods on a lower (close to the origin)
indifference curve yield lower level of satisfaction.
I3
I2
I1
O X
Given the above utility function, an indifference map can be derived by assigning every
possible value to K in such a way that as we move away from the origin the level of
satisfaction increases (Higher K).
38
The negative of the slope of indifference curve at any one point measures the rate of
change of commodity Y as a result of change in commodity X, and is called the marginal
rate of substitution of the two commodities.
Geometrically, the marginal rate of substitution is given by the slope of the tangent line at
that point:
dY
MRS X ,Y = − = − Slope of the Indifference Curve
dX
For example, MRSX,Y = 5 can be interpreted as: five units of Y must be sacrificed in
order to increase the consumption of X by one unit and leave the consumer on the same
level of satisfaction. Similarly, MRSY,X = 3 can be interpreted as: three units of
commodity X must be sacrificed in order to increase the consumption of commodity Y by
one unit and leave the consumer on the same level of satisfaction. With this definition,
the proponents of the indifference curves approach thought that they could avoid the non-
operational concept of marginal utility.
The concept of marginal utility (MU) is implicit in the definition of the marginal rate of
substitution (MRS), since it can be proved that the marginal rate of substitution (the slope
of the indifference curve) is equal to the ratio of the marginal utilities of the commodities
involved in the utility function:
Symbolically:
MU X MU Y
MRS X ,Y = or MRS Y , X =
MU Y MU X
Where, MRSx,y is marginal rate of substitution of x for y
39
MRSy,x is marginal rate of substitution of y for x
MUx is marginal utility of commodity x
MUy is marginal utility of commodity y
We can prove the above relationship between MRS and MU
Proof:
The slope of any curve at any one point is measured by the slope of the tangent line at
that point. For example the slope of the curve f(x) at point a in the figure below (figure
2.6) is the slope of line one (L1) and the slope of the curve at point b is the slope of line
two (L2). The equation of a tangent line is given by the total derivative 2, which shows the
total change of the function as its determinant changes.
Y f(x)
L2
L1
a
O
X
# The total utility function in the case of two commodities x and y (assuming that the
consumer is consuming only two commodities x and y) is: U = f(x,y).
The equation of an indifference curve is: U = f (x,y) = K, where K is a constant.
2
The total derivative of a function is change in the dependent variable as a result of change in the
independent variable. For example, if the function is given by Y= f(X), Y being the dependent variable
dY
and X the independent variable, then the total derivative of the function is , where dY is change in Y
dX
and dX is change in X.
40
# The total differential of the utility function is measured by dU. dU shows the total
change in utility as the quantities of both commodities change.
∂U ∂U
dU = dX + dY
∂X ∂Y
∂U ∂U
[ = MU X and = MU Y ]
∂X ∂Y
dU = ( MU X )dX + ( MU Y )dY
In words, the total change in utility (dU) caused by changes in X and Y is
approximately equal to the change in X (dX) multiplied by its marginal utility
(MUx) plus the change in Y (dY) multiplied by its marginal utility (MUy).
# By definition, along any particular indifference, the total change (differential) in
utility is equal to zero since the consumer derives the same level of satisfaction
along the same indifference curve.
Hence, dU = 0
dU = ( MU X )dX + ( MU Y )dY = 0
# By rearranging the above equation we obtain:
dU = ( MU X )dX + ( MU Y )dY = 0
( MU X )dX = −( MU Y )dY
dY MUX
− = .
dX MUY
dY
[But, recall that MRSX,Y = − ]
dX
dY MU X
MRS X ,Y = − =
dX MU Y
dX MU Y
Similarly, MRS Y , X = − = .
dY MU X
41
Properties of Well-Behaved Indifference Curves
a) Well-behaved indifference curves are negatively sloped. This denotes that if the
quantity of one commodity (X) decreases, the quantity of the other commodity (Y)
must increase, if the consumer is to stay on the same level of satisfaction.
b) The further away from the origin an indifference curve lies, the higher the level of
utility it denotes. Bundles of goods on a higher indifference curve are preferred by
the rational consumer.
I3 > I2 > I1
I3
I2
I1
X
O
Figure 2.7: A Higher Indifference Curves Denote Higher Level of Utility
c) Indifference curves do not intersect to each other. If they did, the point of their
intersection would imply two different levels of satisfaction, which is impossible.
That means if indifference curves intersect to each other, they will violate the
assumption of transitivity and consistency.
42
Y
I2
I1
O X
Figure 2.8: Intersecting Indifference Curves, Which Is Not
Possible
d) Indifference curves are convex to the origin: The slope of the indifference curves
decline (in absolute terms) as we move along the curve from the left downwards to
the right. This implies that the marginal rate of substitution of the commodity X for
commodity Y (= MRSx,y) is diminishing.
However, depending on the type of the commodities there are different kinds of
indifference curves which violate some of the above mentioned behaviors of an
indifference curve. Consider the following different types of indifference curves.
43
1. The Case of Perfect Substitutes
Substitute goods are goods which can serve similar needs of the consumer. For example,
Coca Cola and Pepsi, Tea and coffee, Bread and ‘Injera’ may be considered as examples
of substitute goods.
If the two goods X and Y are perfect substitutes to each other, the indifference curves
will be downward sloping straight line. Hence, the marginal rate of substitution between
the two goods will be constant. In other words, two goods are perfect substitutes if the
consumer is willing to substitute one good for the other at a constant rate. The simplest
case of perfect substitutes occurs when the consumer is willing to substitute the goods on
a one-to-one basis.
For example, let us consider a choice between red pencil and blue pencil, and the
consumer involved like pencils, but doesn’t care about colours at all. Pick a consumption
bundle, say (10, 10). Then for this consumer, any other consumption bundle that has 20
pencils in it is just as good as (10, 10). Mathematically speaking, any consumption
bundle (X, Y) such that X + Y = 20 will be on the consumer’s indifference curves.
Hence, the indifference curves for this consumer are parallel downward sloping straight
lines.
O X
44
2. The Case of Perfect Complements
Complement goods are goods which are consumed together to serve a single need of the
consumer. Perfect complements are goods that are always consumed together in fixed
proportions. For instance, Sugar and Tea, Photo camera and Film, Car and Fuel can be
considered as examples of perfect complementary goods. This means that one good
cannot be consumed without the other as the goods are consumed with fixed proportions.
Thus if the two goods are perfect complements to each other, the indifference curves will
be L-Shaped (right angled) as depicted in Figure 2.10 below.
A good example of perfect complements is the case of right shoe and left shoe. The
consumer likes shoes but always wear right shoe with left shoe together. Having many of
left shoes and one right shoe doest allow the consumer to wear more than one pair of
shoes, meaning, having only one out of a pair of shoes does not do a consumer a bit of
good. The consumption bundle (10, 10), i.e., 10 units of left and 10 units right shoes,
gives the consumer the same level of satisfaction for the consumer as a bundle which is
composed of (11, 10) or (10, 11). Hence, the consumer always consume at the vertex of
the indifference curves where the number of the two goods are the same or the proportion
of the two perfectly complementary goods are the same.
X
O
Figure 2.10: Indifference Curve for Perfect Complements
45
Increasing both the number of left shoes and right shoes at the same time will move the
consumer to a higher indifference curve, or to a more preferred position.
The important thing about perfect complement goods is that the consumer consumes the
goods in fixed proportions, not necessarily that the proportion is one-to-one. For
example, if the consumer always uses two teaspoons of sugar in his/her cup of tea and
doesn’t use sugar for anything else, then the indifference curves will still be L shaped. In
this case the corners of the indifference curves will occur at (2 teaspoons of sugar, 1 cup
of tea), (4 teaspoons of sugar, 2 cup of tea), and so on.
If one of the two commodities is ‘good’ and the other is ‘bad’ (for example, alcohol
(‘bad’) and milk (‘good’)), the consumer needs some compensation for every unit of the
‘bad’ commodity he consumes. A bad is a commodity that the consumer doesn’t like to
consume. And this compensation is by extra unit consumption of the ‘good’ commodity.
This implies that the consumer increases his consumption of the ‘good’ commodity for
increase in consumption of the ‘bad’ commodity. In such a case, the indifference curve
will be upward sloping. The level of satisfaction increases as we move closer to the axis
of the ‘good’ commodity.
Y
(Bad)
X (Good)
O
46
4. The Case of Neutrals
A good is a neutral good if the consumer doesn’t care about it one way or another. Let’s
say that the consumer is neutral about good Y and likes good X. Then in this case, the
indifference curves will be vertical lines.
Y
(Neutral)
X
O
Figure 2.12: Indifference Curves for a Neutral Good
Economists assume that consumers choose the best bundle of goods and services they can
afford. Suppose that there is some set of goods from which the consumer can choose. In
real life there are many goods to consume, but for the sake of simplicity it is enough to
consider the case of only two goods X and Y so that we can depict the consumer’s choice
behavior graphically. Consider that the prices of the two commodities are given by Px
and Py, and that the amount of money the consumer has to spend is I. Then the budget
constraint of the consumer can be written as:
Px Qx + PyQy ≤ I where: Px is the price of commodity X
Py is the price of commodity Y
Qx is the quantity of commodity X
Qy is the quantity of commodity Y, and
I is the income of the consumer
47
The consumer maximizes his/her satisfaction given his/her income. That means the
consumer’s utility maximization objective is constrained or limited by his/her income. In
other words, the consumer has a given income which sets limits to his/her maximizing
behavior. Income acts as a constraint for utility maximization.
In the above equation which shows the budget constraint of the consumer, PxQx gives
the total amount of income that the consumer spends on commodity X and PyQy gives
the total amount of income that the consumer spends on commodity Y. Hence, the total
amount of spending of the consumer on the two goods, X and Y, is PxQx + PyQy. It is
considered that this total amount of spending of the consumer on commodities X and Y
(PxQx + PyQy) is equal to I (Income of the consumer) as it is assumed that the consumer
spends all of his/her income on the consumption of the two commodities X and Y.
Thus, if the consumer spends all of his/her income on the consumption of the two
commodities, X and Y, the proportion of income spent on commodity X and commodity
Y is determined by dividing the total spending on X (= PxQx) by total income (I) and
total spending on Y (= PyQy) by total income of the consumer, respectively.
PX Q X
Proportion of income spent on commodity X =
I
PY QY
Proportion of income spent on commodity Y =
I
The budget constraint of the consumer requires that the amount of money spent on the
two goods be no more than the total amount of the consumer’s income. Hence, the
consumer’s affordable consumption bundles are those that do not cost any more than I.
The set of all affordable consumption bundles at prices Px and Py, and income I is called
the budget set of the consumer.
48
Properties of the Budget Line
The budget line can be defined as the locus of points of all the combinations of the two
commodities that cost exactly the consumer income. The budget line includes the bundles
of goods that just exhaust the consumer’s income.
In the case of two commodities the general budget line equation can be given by:
PxQx + PyQy = I --------------------------------------------------- Budget Line
We can present the income constraint graphically by solving for Qy from the general
budget equation. From the general budget equation we know that PxQx + PyQy = I.
I P Q
Qy = − X X …………………………………………………….. Budget line
PY PY
Given the prices of the two commodities, Px and Py, and income of the consumer, I, we
may find the corresponding values of Qy by assuming various values of Qx.
Thus, if Qx = 0 (that is, if the consumer spends all his/her income on commodity Y), the
I
consumer can buy units of Y. Mathematically, this will give us the vertical intercept
PY
of the budget line. Similarly, if Qy = 0 (that is, if the consumer spends all his/her income
I
on commodity X), the consumer can buy units of X, and this will give us the
PX
horizontal intercept of the budget line.
49
Let’s consider that we measure commodity Y on the y-axis and commodity X on the x-
axis. Hence:
# Vertical intercept of the budget line: when the consumer consumes commodity Y
I P Q
only (0, Y) Qy = − X X
PY PY
I P
Qy = − X (0) , Since Qx = 0
PY PY
I
Qy =
PY
# Horizontal intercept of the budget line: when the consumer consumes commodity
I P Q
X only (X, 0) Qy = − X X
PY PY
I P Q
0= − X X , since Qy = 0
PY PY
I P Q I
= X X , bringing to the left hand side to solve for Qx
PY PY PY
I P
Qx = , multiplying both sides by Y to solve for Qx
PX PX
If we join the vertical and the horizontal intercepts on the X–Y set of axis, then we will
obtain the budget line shown Figure 2.13.
Y
A Budget Line
I/Py
Budget
set
B
X
O
I/Px
Figure 2.13: Budget Line and Budget Set of the Consumer
50
The area below the budget line is the budget set, which includes all affordable bundles by
the consumer.
OA I PY P
Geometrically, the slope of the budget line is − =− =− X .
OB I PX PY
∂QY P
Mathematically, the slope of the budget line is the derivative =− X .
∂Q X PY
The slope of the budget line has a nice economic interpretation. It measures the rate at
which the market is willing to substitute commodity X for commodity Y. The negative
sign is there since the change in X and change in Y must always have opposite signs. If
you consume more of commodity X, you have to consume less of commodity Y and vice
versa if you continue to satisfy the budget constraint. Economists sometimes say that the
slope of the budget line measures the opportunity cost of consuming commodity X. This
is because in order to consume more of commodity X you have to give up some
consumption of commodity Y.
When prices and/or income change, the set of goods that a consumer can afford changes
as well. How do these changes affect the budget set? Let us first consider changes in
income.
An increase in income, assuming that Px and Py are constant, will increase the vertical
intercept and the horizontal intercept, and does not affect the slope of the budget line.
Thus, an increase in income will result in a parallel outward shift of the budget line.
Similarly, a decrease in income will reduce both the vertical and the horizontal intercepts
and as a result it will cause a parallel inward shift of the budget line.
51
Y
Y
I1/Py
I2/Py
I2/Py
I1/Py
X
X I2/Px I1/Px
O I1/Px I2/Px
Figure 2.14b: Effect of Decrease in
Figure 2.14a: Effect of Increase in
Income from I1 to I2 on the Budget Line
Income from I1 to I2 on the Budget Line
Let us first consider an increase in price of X while holding price of Y and income
constant.
According to the budge line equation, increase in Px will not change the vertical intercept
(I/Py), since I and Py are constant. But it will make the budget line steeper since Px/Py
(the slope of the budget line in absolute terms) will become larger. That means, increase
in Px shifts the horizontal intercept inward, as a result the budget line rotates inward with
a constant vertical intercept and a steeper slope.
Similarly, if we consider the effect of decline in Px while holding Py and I constant, the
vertical intercept remains constant but the slope becomes flatter and the horizontal
intercept increases and shift outward, as a result the budget line rotates outward with a
constant vertical intercept and a flatter slope.
52
Y
Y
I/Py
I/Py
X X
O O
I/Px2 I/Px1 I/Px1 I/Px2
Note:
1. If both prices Px and Py increase in the same proportion, both the vertical and the
horizontal intercepts shift inward by half of increase in prices. Thus, the budget line
will shift inward. The opposite is true for proportionate decline in price of X and Y.
2. The budget set does not change when we multiply all prices and income by a positive
number, the optimal choice of the consumer from the budget set doesn’t change
either.
3. The changes in commodities prices could be either the result of natural changes in
market conditions (demand and/or supply conditions) or because of government
policies (because of taxes imposed on or subsidies granted for the consumption of a
particular commodity). For instance, if government imposes a value (an ad valorem),
tax on the consumption of good X, at a rate of 5%, then the price this good increases
from PX to PX + 0.05PX = (1 + 0.05)PX = 1.05PX. If the price of the other commodity
(PY) and income (I) are kept constant, the effect of this tax on the budget line will be
similar to the one shown in Figure 2.15a. Similarly, if a value subsidy of 10% is
53
granted on the consumption of X, the budget line is affected in a way similar to that
shown in Figure 2.15b.
The consumer is at equilibrium when he/she maximizes his/her utility, given his/her
income and the market prices of the commodities. Under the indifference curves theory,
two conditions must be fulfilled for the consumer to be in equilibrium.
The first condition is that the marginal rate of substitution be equal to the ratio of
MU X PX
commodity prices. MRS XY = = . This is a necessary but not sufficient
MU Y PY
condition for equilibrium. The second condition is that the indifference curves be convex
to the origin. This is the sufficient condition for equilibrium.
This means that at equilibrium the consumer’s budget line is tangent to the highest
possible indifference curve and at the tangency point the slope of the indifference curve (
PX P
= − MRS XY ) is equal to the slope of the budget line (= − ). That is, MRS XY = X at
PY PY
equilibrium.
Y
I3
E
Y*
I2
I1
O X
X* L
54
The equilibrium of the consumer is attained at the tangency point of the budget line (BL)
and the indifference curve (I2), consuming Y* units of commodity Y and X* units of
commodity X (Figure 2.16). This is because, the consumer cannot consume on the third
indifference I3 curve as it is not attainable given his/her income. And, the consumer does
not consume on the first indifference curve (I1) as he/she can consume more given his/her
income.
Activity 4
1. Explain the difference between the equilibrium conditions of the consumer under
cardinal utility approach and ordinal utility (indifference curves) approach.
2
2. Suppose the total utility function of a consumer is given by TU(x) = 2x . What is
the marginal utility of X?
3. Assuming the income of the consumer to be constant, what will be the effect of a
decline in price of both commodity X and commodity Y by the same proportion?
Explain your answer with the help of graph(s).
4. If the price of commodity X is 10 Birr per unit and the price of commodity of Y is 8
Birr per unit, write the budget line equation assuming that the consumer spends all
of his 500 Birr income on the two commodities, X and Y.
5. Mention at least one assumption which is common for both the cardinal and the
ordinal utility approaches.
6. Graphically explain:
a. The effect of increase in price of Y on the budget line when price of X and
income are constant.
b. The effect of decrease in price of Y on the budget line when price of X and
income of the consumer remain constant.
Previously when we were discussing the behavior of a budget line, we were able to
identify that the budget line changes with changes in income of the consumer (I) and
55
prices of the commodities (Px and Py). When the budget line changes due to change in
income or prices or both, the equilibrium of the consumer will also change since the most
preferred attainable indifference curve of the consumer also changes with the new budget
line. With the new equilibrium there are also new levels of equilibrium quantities.
Hence, in this section we see the effect of changes in income of the consumer on the
equilibrium of the consumer. And in the next section we will see the effect of a change in
the price of a commodity on the equilibrium of the consumer and on the level of the
quantity consumed.
In analysing the effect of a change in income on the equilibrium of the consumer, we use
the concepts of Income Offer Curve and Engel Curve.
Suppose that the initial income of the consumer is I1 with the budget line BL and the
initial indifference curve is IC1. Thus, the initial equilibrium point of the consumer is E1
where the consumer consumes X1 units of commodity X (See Figure 2. 17). Given these
initial conditions, suppose that the consumer’s income rises, ceteris paribus. If the income
of the consumer increases, say, from I1 to I2, the budget line will shift upward from BL to
B’L’ in a parallel manner and the consumer will be able to consume on a higher level of
indifference curve, IC2. Thus, the equilibrium of the consumer will also change from E1
to E2 at the tangency point of the new budget line B’L’ and the now affordable
indifference curve, IC2.
Here, when the equilibrium changes from E1 to E2, E2 will be to the right of E1 if the
good is normal. A commodity is defined as ‘Normal’ when its demand changes in the
same direction as income, i.e., the demand of the commodity increases with increase in
income and vice versa. However, if the demand for the commodity changes inversely
with income, the commodity is called an inferior good. That is, for an inferior good
demand for the commodity decreases with an increase in income and vice versa. In the
case of a normal good, the consumption of commodity X increases from X1 to X2. But, if
the good is inferior good E2 will be to the left of E1 and the level of consumption will
decline from X1 to X2.
56
If income continues to increase, there will be successive equilibrium points with the
changed budget lines and higher indifference curves, and the quantities of the commodity
will also be changed. As can be seen from Figure 2.17, if we connect those successive
equilibrium points which result from changes in income, we will find an Income Offer
Curve. Income offer curve is also called income consumption curve or income expansion
path.
For a normal good, income offer curve is positively sloped as the new equilibrium points
lie to the right of the original ones. On the other hand, the income offer curve for an
inferior good is negatively sloped since the new successive equilibrium points of the
consumer (caused by increases in income) lie to the left of the original equilibrium point.
For each level of income, I, there will be some optimal/equilibrium choice for each of the
goods, X and Y. Let us focus on good X and consider the optimal choice at each set of
prices and income (Px, Py, I). This is simply the demand function for good X.
57
Y Y
B’
B’ E2 Income offer
Income curve for
Offer Curve IC2
inferior good
for normal
B good B
E1 E2
IC2 E1
IC1 IC1
X
X
O X1 X2 L L’ O X1 X2 L L’
Figure 2.17a: Income Offer
Figure 2.17b: Income Offer
Curve for a Normal Good X
Curve for an Inferior Good X
I I
Engel Curve
I2 for Normal
Good I1
X
X
O X1 X2
O X1 X2
Figure 2.17c: Engel Curve Figure 2.17d: Engel Curve
for a Normal Good X for an Inferior Good X
If we hold the prices of X and Y fixed and look at the how demand for X changes as we
change income, we generate a curve which is known as the Engel Curve. That means,
depicting the relationship between changes in income and changes in the quantity
consumed of a commodity while all commodity prices are held constant, will give as
58
what is called Engel curve of the commodity. An Engle curve is a graph of the demand
for one of the commodities as a function of income, with all prices held constant.
The Engel curve is positively sloped for normal goods since consumption of the good
increases with increase in income or since it decreases with a decrease in income. On the
other hand, the Engel curve for an inferior good is negatively sloped since consumption
of the good decreases with an increase in income or increases with a decrease in income.
Derivation of the Demand Curve using the Indifference Curves Theory: Price Offer
Curve and the Demand Curve
From the equilibrium of the consumer under the indifference curves theory, we can
derive the demand for a good graphically.
As the price of a commodity (Px) falls, assuming that Py and I are constant, the budget
line of the consumer rotates upward from its initial position to a new position (from BL
to BL’ in Figure 2.18a) with a constant vertical intercept. This is due to the increase in
the purchasing power of the given money income of the consumer. With more purchasing
power in his/her possession, the consumer can buy more of X and/or more of Y. This
means that the new budget line (BL’) is now tangent to a new indifference curve (I2)
which is higher than the original indifference curve (I1).
If we allow the price of the commodity (Px) to fall continuously and join the points of
tangencies of the successive budget lines and higher indifference curves (equilibrium
points with the changed prices), we form the so called the Price Consumption Curve.
The price consumption curve is also referred to us the price offer curve.
From the price consumption curve due to change in price of commodity X, we can derive
the demand curve for commodity X. In the figure 2.18a below, at point E1, the consumer
buys X1 units of commodity X at the original level of price (say P1). At point E2, price has
reduced from P1 to P2, thus the quantity demanded of commodity X has increased from
59
X1 to X2, and so on. Now we can plot the price quantity pairs defined by the points of
equilibrium (on the price consumption curve) to obtain a demand curve for commodity X
(See Figure 2.18b below).
E3
Price- consumption curve
E2
I3
E1 I2
I1
L X
O X1 X2 X3 L’ L’’
P1
P2
P3 Demand Curve
X
O X1 X2 X3
60
The demand curves for normal goods always have negative slope, denoting the ‘law of
demand’. The law of demand states that price and quantity demanded are
oppositely/negatively related, i.e. the quantity bought increases as the price falls.
So far we have seen that a fall in price of X (say, from P1 to P2) results in an increase in
the quantity demanded (say, from X1 to X2). This is the total effect which can be split in
to two separate effects, a substitution effect and the income effect.
In the indifference curves theory, the ‘law of demand’ is derived from what is known as
the Slutsky’s Theorem, which states that the substitution effect of a price change (relative
to the price) is always negative; if the price increases, the quantity demanded decreases
and vice versa.
The substitution effect is due to the tendency of the consumer to consume more of a
relatively cheaper good. Thus, it is assumed that the consumer will increase the
consumption of the good whose price has declined by reducing the consumption of the
other commodity and remain on the same level of satisfaction. Substitution effect is the
increase in the quantity bought as the price of the commodity falls, after ‘adjusting’
income so as to keep the real purchasing power of the consumer the same as before. This
adjustment in income is called compensating variation. The compensating variation can
be shown graphically by a parallel shift of the new budget line until it becomes tangent to
the initial indifference curve (See Figure 2.19). The purpose of the compensating
variation is to allow the consumer to remain on the same level of satisfaction as before
the price change. The compensated budget line will be tangent to the original indifference
curve I1 at point E2 to the right of the original tangency (equilibrium E1), because this line
is parallel to the new budget line which is less steep than the original one when the price
of X falls.
61
Thus, the movement from E1 to E2 shows the substitution effect of the price change, i.e.
because of decline in price of X, the consumer buys more of X which is now cheaper,
substituting X for Y (movement from X1 to X2).
However, the compensating variation is a device which makes possible the isolation of
the substitution effect, but does not show the final equilibrium of the consumer. The final
equilibrium of the consumer after the price decline is defined by point E3 at the tangency
point of the new budget line and a higher indifference curve I2. Since the consumer’s
purchasing power has now increased due to the decline in price of X he/she will spend
some of his/her increased real income on X, if the commodity (X) is normal. Thus, the
consumer moves from X2 to X3. This is the income effect of the price change.
The income effect of a price change for normal goods is negative; when purchasing
power increases due to a decline in price, quantity consumed increases and when
purchasing power decreases due to an increase in price, quantity consumed declines if the
good is normal.
Y I2
I1
B
B’ E1
Original budget line
E3
Compensated E2 New budget line
Budget line
O X1 X2 L X3 L’’ L’ X
Substitution Income
Effect Effect
62
If, however, the commodity is inferior, the income effect of the price change is positive
(i.e., for an increase in price, the quantity demanded of an inferior good will also increase
due to the decline in purchasing power; and conversely, for a decrease in price, the
quantity demanded of an inferior good will also decline due to the increase in purchasing
power). But the substitution effect of a price change is negative for normal goods as well
as inferior goods – for price rise quantity will decline, and for price decline quantity will
rise.
Y
Original budget line
E3
E1 I2
B’
X
O X1 X3 X2 L L’’ L’
Substitution
Effect
Total Price Effect Income
Effect
Figure 2.19b: Substitution and Income Effects for an Inferior Good X
For normal goods, the negative substitution effect reinforces the negative income effect
and as a result the total price effect is also negative. Similar to the case of normal goods,
the substitution effect is negative for inferior goods as well. However, unlike the case of
normal goods, the income effect is positive for inferior goods. Nevertheless, since the
substitution effect is stronger than the income effect for most of the inferior goods, the
63
total effect is also negative. Thus, the negative substitution effect is in most cases
adequate to establish the law of demand (the negative relationship between price and
quantity demanded/consumed). It is when the income effect is positive and stronger than
the substitution effect that the law of demand does not hold. This is the case of the Giffen
Goods, which are inferior goods with a positive sloping demand curves. Giffen goods are
very rare in practice. Thus, for giffen goods, like the case of inferior goods, the
substitution effect is negative and the income effect is positive. But the positive income
effect is stronger than the negative substitution effect in the case of giffen goods. As a
result, the total price effect for giffen goods is positive (quantity will increase for an
increase in price, and vice versa).
Y
E3
IC2
B’
E1
E2
IC1
X
O X3 X1 X2 L’ L’’ L
64
Activity 5
1. Explain the difference between the income offer curves for a normal good and for
an inferior one.
2. Explain the difference between the Engel curves for normal and inferior goods.
3. Why is the substitution effect of a price change always negative regardless of
whether the good is normal or inferior?
4. What does the compensated budget line represent?
The demand (function) of a consumer for a commodity can be derived from the
equilibrium condition of the consumer.
As we have seen previously, the equilibrium condition of the consumer is given by the
tangency point of the indifference curve and the budget line of the consumer. At this
point, the slope of the two curves is equal. Thus,
MU X MU Y MU N
= = ... = .
PX PY PN
For Example, consider the case of two goods, X and Y. If the total utility function is
1
given by: U = XY ; where U is total Utility, X is quantity of good X and Y is quantity of
4
good Y, we can derive the demand functions for the two goods as follows.
MU X P
Step 1: At equilibrium, MRS X ,Y = = X .
MU Y PY
65
Given the total utility function, the marginal utilities of X and Y are 3:
∂U 1
MU X = = Y ………………………………………………….……..……… (1)
∂X 4
∂U 1
MU Y = = X …………………………….…………………….……..……… (2)
∂Y 4
MU X P
By substituting the marginal utilities into the equilibrium condition = X , we
MU Y PY
obtain:
1 Y
4 = PX …………………………………………………………………………..… (3)
1 X PY
4
Y P
Rearranging the above equation gives: = X .
X PY
By criss-cross multiplying we obtain:
PxX = PyY ………………………………………………………………….………….(4)
Note that the equality of the expenditures on the two commodities is not a general rule
rather it depends on the specific form of the utility function.
Step 2: Now we can derive the demand function for commodity X by substituting
equation number (4) above into the budget line equation.
(Recall that the budget line is PxX + PyY = I).
PxX + PyY = I
Ö PxX + PxX = I since PyY = PxX from (4)
Ö 2PxX = I
2 PX X I
Ö = dividing both sides by 2Px.
2 PX 2 PX
Ö X =
I
2 PX
Or X = 0.5
I
PX
→ Demand for X
∂Y
3
We use the derivative rule, i.e., if Y = Xn, then = nX n −1 .
∂X
66
Thus, the demand for X is negatively related to its own price, Px, and positively related to
income, I.
Similarly, we can derive the demand for commodity Y by substituting equation (4) into
the budget line equation PxX + PyY = I.
PxX + PyY = I
Ö PyY + PyY = I since PyY = PxX from (4).
Ö 2PyY = I
Dividing both sides by 2Py gives:
ÖY=
I
2 PY
Or Y = 0.5
I
PY
→ Demand for Y
Thus, the demand for Y is negatively related to its own price, Py, and positively related to
income, I.
Although the advantages of the indifference curves approach are important, the theory
has indeed its own severe limitations.
1. The main weakness of this theory is its axiomatic assumption of the existence and the
convexity of the indifference curves. The theory does not establish either the
existence or the shape of the indifference curves. It assumes that indifference curves
exist and have the required shape of convexity.
2. Furthermore, it is questionable whether the consumer is able to order his/her
preferences as precisely and rationally as the theory implies. Also the preferences of
the consumer changes continuously under the influence of various factors, so that any
ordering of these preferences, even if possible, should be considered as valid for the
very short run.
3. The theory has also retained some of the weaknesses of the cardinal utility theory
with the strong assumption of rationality and the marginal utility implicit in the
definition of the marginal rate of substitution.
67
4. Another defect of the indifference curves approach is that it does not analyze the
effects of advertising, the effect of past behavior (habit persistence), and effect of
interdependence of preferences among consumers which lead to behavior that would
be considered as irrational.
68
Derivation of the Demand Curve Using the Revealed Preference Hypothesis
Assume that the consumer has the budget line BL as shown in Figure 2.20a below. If we
assume that he/she chooses the collection of goods denoted by point A, this reveals
his/her preference for this batch.
Now, suppose that the price of X falls so that the new budget line facing the consumer is
BL’ (Figure 2.20a). We will show that the new batch will include a larger quantity of X
with the help of the figure below.
B’
A
D
C
X
O X1 X2 L X3 L’’ L’
Px
P1
Demand Curve
P2
X
O
X1 X2
Figure 2.20b: Demand Curve for a Normal Good
Derived Using the Revealed Preference Hypothesis
69
Firstly, we make a ‘compensating variation’ in the income, which consists of the
reduction of income so that the consumer will have just enough income to enable him/her
to continue purchasing bundle ‘A’ if he/she so wishes. The compensating variation is
shown in Figure 2.20a, by a parallel shift of the new budget line so that the compensated
budget line B’L’’ passes through point A.
Since the collection A is still available to him/her, the consumer will not choose any
bundle to the left of A on the segment B’A. This is because his/her choice would be
inconsistent, given that all the batches on segment B’A were revealed inferior to A in the
original situation. Hence, the consumer will either continue to buy A (in which case the
substitution effect is zero) or he/she will choose a batch on the segment AL’, such as C,
which includes a larger quantity of X (namely X2).
Secondly, if we remove the (fabricated) reduction in income and allow the consumer to
move onto the new budget line BL’, he/she will choose a batch (such as D) to the right of
C (if the commodity is normal – has a negative income effect). The new revealed
equilibrium position (D) contains a larger quantity of X (i.e. X3) which results from the
fall in its price. Thus, the revealed preference axiom and the implied consistency of
choice open a direct way to the derivation of the demand curve: as price falls, more of X
is purchased.
Activity 6
1. What are the differences and the similarities between the indifference curves
approach and the revealed preference hypothesis?
2. Suppose that the total utility function of a consumer is given by TU(x,y) = 3X2Y,
and the prices of X and Y are 1 Birr and 2 Birr per unit, respectively. If the income
of the consumer is 600 Birr and if he spends all of his income on the consumption
of commodities of X and Y, find the optimum amount of X and Y that the consumer
will consume at equilibrium.
70
2.4 THE MARKET DEMAND FOR A COMMODITY
The market demand for a given commodity is the horizontal summation of the demands
of the individual consumers. In other words, the quantity demanded in the market at each
price is the sum of the quantities demanded by all consumers at that price.
In the real world, there may be millions of individual consumers in a market, but for
simplicity, let us consider the case of only four individual consumers in a given market.
In Table 2.1 we show the quantity demanded by four consumers at various prices of a
certain commodity and the total (market) quantity demanded. These data are also
presented graphically in Figure 2.21.
71
From the table, we observe that the market demand is negatively sloped as the individual
demands are. Sometimes, one or two of the individual demands may be positively sloped
if the good is giffen for those individuals. For example, the demand for individual C is
positively sloped implying that the good is giffen for consumer C. Although the
commodity is giffen and the demand is positively sloped for consumer C, the market
demand has the normal negative slope, because the demands of other consumer more
than offset the giffen case of consumer C. Note that the classification of goods as normal,
inferior or giffen depends on the individual consumer. That is, depending on the income,
attitude, and preferences of the consumer, what is normal for one consumer may be
inferior or giffen for another.
Economic theory does not define any particular form of the demand curve. In textbooks,
market demand is sometimes shown as a straight line (liner demand curve) and
sometimes as a curve convex to the origin. The linear demand curve may be written in
the form: Q = a – bP. This linear form implies a constant slope but with a changing
elasticity at various prices. [We will see elasticity later on].
QD
250
200
150
100
50
0
2 4 6 8 10 12 14 16
Price
DA DB DC
DD DM
72
Determinants of Demand
The law of demand states that the quantity demanded of a commodity increases when
there is a decline in the price of the commodity (and vice versa), for an ordinary good. An
ordinary good is a good which is either normal or inferior but not giffen. If the good is
giffen the demand curve will be upward sloping as there is direct relationship between
quantity demanded and price of the commodity. A change in the commodity’s price
results in movement along the same demand curve as shown in Figure 2.22 below.
A
P1
P2 B
Qx
O
X1 X2
73
2. Price of Other Commodities
A change in the price of another related commodity, which could be either a substitute or
a complement, is also a factor that affects the demand for a commodity. When the price
of a substitute good rises, the quantity demanded of the commodity under consideration
will also increase. Thus, this change shifts the market demand curve outward. For
instance, if the price Coca Cola rises, the quantity demand of Pepsi is expected to rise at
the prevailing price. When the price of a complementary good rises, the quantity
demanded of the commodity under consideration will decline, and thus it will make the
demand curve shift upward. As an example, if the price of petroleum rises, the quantity
demanded of car falls.
As income of the consumer increases, the quantity demanded of a good will increase if
the good is normal, and thus the demand curve will shift outward. However, if the good is
inferior the quantity demanded of the commodity declines with an increase in income,
and the demand curve will shift downward.
P1
X1 X2 Qx
O
Figure 2.23: Shift of the Demand Curve as, for example, Income Increases
74
Apart from the above determinants, market demand is also affected by numerous other
factors, such as tastes and preferences, the distribution of income, the size of total
population and its compositions, wealth, credit availability, etc.
As can be seen from the above two figures, Figure 2.22 and Figure 2.23, the result of a
change in the price of the commodity itself is shown by a movement from one point to
another on the same demand curve, while the effect of changes in other determinants is
shown by a shift of the demand curve. Thus, these other factors are considered as the shift
factors of the demand curve. The demand curve is thus drawn under the ceteris paribus
assumption; the shift factors (factors other than the price of the commodity) are assumed
to remain constant in drawing the demand curve.
Elasticity can be defined as the responsiveness of a variable for a change in one of its
determinants, holding the other factors constant. Thus, elasticity of demand is the
measure of responsiveness of quantity demanded as a result of a change in one of its
determinants, holding all the other factors constant.
There are as many elasticities of demand as its determinants. The most important of these
elasticities are:
a) The Price Elasticity of Demand,
b) The Income Elasticity of Demand , and
c) The Cross- Price Elasticity of Demand.
Let us start with the first one: the price elasticity of demand
The price elasticity of demand is the relative measure of the responsiveness of quantity
demanded to changes in the commodity’s own price. If the changes in price are very
75
small, we use the point elasticity of demand as a measure of the responsiveness of
demand. If the changes in price are not small, we use the arc elasticity of demand as the
relevant measure.
At each point on the market demand curve, the price elasticity of demand is defined as
the percentage change in the quantity demanded resulting from a one percent change in
price of the commodity. In other words, it is the sensitivity of the quantity demanded to
changes in price.
If, for instance, the demand curve is linear with an equation of the form Q = a – bP, its
dQ
slope will be = -b
dP
P
Substituting this into the elasticity formula we obtain: ε pd = -b .
Q
This implies that the price elasticity of demand differs at the various points of the linear
demand curve. That is, even though a linear demand has a constant slope, the price
elasticity of demand is not constant.
The above formula for the price elasticity is applicable only for infinitesimal (very small)
changes in price. If the price changes appreciably (significantly), we use the following
dQ P1 + P2
formula which measures the arc elasticity of demand: ε pd = ( ).
dP Q1 + Q 2
76
The arc elasticity of demand measures the average elasticity, that is, the elasticity at the
mid point of the chord that connects two points, lets say A and B, on the demand curve.
These two points are defined by the initial and the new price levels. It should be clear that
the measure of the arc elasticity is an approximation of the true elasticity of the section
from A to B on the demand curve. It is used when we know only the two points A and B
but not the intermediate ones.
A
Arc Elasticity
B
O Q
We can also estimate the price elasticity of demand graphically. Suppose that we want to
estimate the price elasticity of demand plotted in Figure 2.25 below.
(/ ε p / = ∞)
d
A
(1 < / ε p / < ∞)
d
(/ ε p / = 1)
d
C
(0 < / ε p / < 1)
d
(/ ε p / = 0)
d
Qx
O
B
Figure 2.25: Geometrical Demonstration
of the Price Elasticity of Demand
77
For a linear demand curve, price elasticity of demand can be determined geometrically by
the ratio of a segment on the demand curve below the point to that above the point. For
example, the price elasticity of demand at point C on the demand curve in Figure 2.25
above is the ratio of the segment CB to the segment AC, i.e., CB/AC.
Hence, if point C is the midpoint of the demand curve (i.e., if CB = AC), the price
elasticity of demand would be one at this point; and, at this point demand is said to be
unitary elastic. To the left of point C, the coefficient of price elasticity of demand is
greater than one (in absolute value) as the segment below is greater than the segment
above, and thus demand is price elastic. To the contrary, to the right of point C, the
coefficient of the price elasticity of demand is less than one (in absolute value) as the
segment below is less than the segment above, thus demand is price inelastic.
At the two extreme points of the demand curve, point A and point B, price elasticity of
demand is perfectly elastic and perfectly inelastic respectively. That means,
1. At point A, demand is perfectly elastic (/ ε pd / = ∞)
Note that:
¾ Price elasticity of demand is always negative due to the inverse relationship
between price and quantity demanded (i.e., because of the law of demand).
¾ We usually talk of the coefficient ignoring the sign; or equivalently, we
dQ P dQ P
sometimes define elasticity as ε pd = – . instead of ε pd = . .
dP Q dP Q
78
P P P
Q Q Q
/ ε pd / = 0: Perfectly
/ ε pd / = ∞: Perfectly 0< / ε pd / <1, / ε pd / > 1
Inelastic Demand
Elastic Demand or / ε pd / = 1
Price elasticities range quite widely. The major factors that determine the price elasticity
of demand are:
1. The availability and closeness of substitute goods:
The more and closer the substitutes for a specific good are, the greater its price
elasticity of demand tends to be. Goods with few and poor substitutes, for example,
foods and fuel, will always tend to have low price elasticity of demand. Goods with
many and very close substitutes will have higher elasticities.
2. The nature of the need that the commodity satisfies:
79
Goods can be either luxuries or necessities in satisfying human needs. Thus, the price
elasticity of demand is more elastic for luxurious goods and less elastic for necessity
goods. The classification of goods as luxuries and necessities depends on the income
and preferences of the consumer; what is luxury for one individual may be necessity
for the other.
3. The proportion of income the good have in the total income of the consumer:
If large proportion of the income of the consumer is spent on a commodity, the price
elasticity of demand for the commodity would be more elastic. On the other hand, if
small proportion of income is spent on a commodity, the price elasticity of demand
would be less elastic. For example, the price elasticity of demand for salt may be less
elastic for most individual consumers as it has a small share in the budget of many
individuals.
4. The available time for the consumer:
In the long run, the price elasticity of demand is more elastic as the consumer has
enough time to respond to the price change by adjusting his/her consumption pattern
and finding new substitutes. In the short run, the price elasticity of demand is less
elastic.
5. The number of uses to which a commodity can be put:
The more the possible uses of a commodity, the greater its price elasticity will be.
The income elasticity of demand is defined as the proportionate change in the quantity
demanded resulting from a proportionate change in income. Symbolically, we may write:
dQ I
ε Id = .
dI Q
The income elasticity of demand is positive ( ε Id > 0) for normal goods and negative ( ε Id
< 0) for inferior goods. Some writers have used income elasticity for classifying goods
into luxuries and necessities. A commodity is considered to be luxury if the income
80
elasticity for its demand is greater than unity ( ε Id > 1). A commodity is a necessity if the
income elasticity for its demand is less than one (0 < ε Id < 1).
Demand for a given commodity is determined not only by price of the commodity but
also by prices of other related commodities. The cross price elasticity of demand is
defined as the proportionate change in the quantity demanded of X resulting from a
proportionate change in the price of Y. Symbolically,
dQx PY
ε Xd ,Y = .
dPy Q X
The sign of the cross price elasticity of demand is negative if X and Y are complementary
goods and positive if X and Y are substitutes. If the two commodities X and Y are not
related to each other, the cross price elasticity of demand is zero. The higher the value of
the cross price elasticity, the stronger will be the degree of substitutability or
complementarily of the two goods, X and Y.
81
The main determinant of the cross price elasticity of demand is the nature of the
commodities relative to their uses. If two commodities can satisfy the same need equally
well, the cross price elasticity is high, and vice versa.
Activity 7
1. Graphically show the effect of an increase in price of Coca Cola on the demand of
Pepsi Cola.
2. If the price elasticity of a commodity is -5, what will be the change in the quantity
demanded of the commodity as a result of a 4 % rise in the price of this
commodity?
3. Interpret the expression: "The cross price elasticity of demand between two
commodities A and B is equal to 3". What can you say about the two commodities?
4. Explain the difference between arc elasticity of demand and point elasticity of
demand.
The total amount spent on a good (Total Expenditure) varies directly with the change in
price when price elasticity of demand is less than one, and inversely related to the price
when price elasticity of demand is greater than one. In other words, if demand is elastic
(if ε Pd > 1), an increase in price reduces total expenditure and a decline in price increases
total expenditure. However, if demand is inelastic (if ε Pd < 1), an increase in price raises
total expenditure and a decrease in price reduces total expenditure.
The intuition behind this result is straight forward. A price increase means that more is
spent on each unit of the good purchased, which tends to increase the amount spent.
Offsetting this is the fact that fewer units of the good are purchased at the higher price. If
the price effect outweighs the quantity effect, then total expenditure rises. If the quantity
effect outweighs the price effect, then total expenditure falls. Elasticity is the measure of
the relative strengths of the two effects.
82
If the price elasticity of demand is less than one (if ε Pd < 1), then a one percent increase
in price induces a less than one percent decrease in quantity demanded. Thus, the price
effect swamps (more than offsets) the quantity effect, and thus total expenditure rises.
But, when price elasticity of demand exceeds one (if ε Pd > 1), a small increase in price
induces a larger decrease in quantity, so the quantity effect dominates and consequently
total expenditure falls.
Note: Since total expenditure and total revenue are two sides of the same coin, the effect
of change in price on total revue is the same as its effect on total expenditure when
demand is elastic and inelastic. The total expenditure of a consumer (the buyer) is the
total revenue for the producer (the seller).
An important relationship exists between the price elasticity of demand and the total
expenditure of consumers on the commodity (total revenue of producers). A decline in
the price of a commodity:
¾ results in an increase in total expenditures if demand is price elastic;
¾ leaves total expenditure unchanged if demand is unitary elastic; and
¾ results in a decline in total expenditure if demand is price inelastic.
Specifically, when the price of the commodity falls, total expenditure (price times
quantity) increases if demand is price elastic ε Pd > 1 because the percentage increase in
quantity (which by itself tends to increase total expenditure) exceeds the percentage
decline in price (which, by itself, tends to decrease total expenditure). Total expenditures
is at its maximum when ε Pd = 1, and decline thereafter as ε Pd falls below 1. That is, when
ε Pd < 1, a reduction in the commodity price leads to an increase in the quantity demanded
of the commodity that is smaller than the percentage reduction in price, and so total
expenditure on the commodity declines. The hypothetical data in Table 2.2 below
illuminate this point.
83
Table 2.2: The Relationship between Price Elasticity of Demand and Total
Expenditure
A 2.00 0 0 ∞
C 1.50 3 4.50 3
E 1.00 6 6.00 1
F 0.50 9 4.50 1/3
H 0 12 0 0
From the above table, we see that between points A and E, / ε Pd / > 1 and total expenditure
on the commodity increases as the commodity price declines. The opposite is true
between points E and F over which / ε Pd / < 1. Total expenditure is maximized at point E
(the geometric mid-point of the demand curve).
Given that total revenue or total expenditure is the product of price and quantity
demanded (i.e., TE = TR = P.Q; where TE is total expenditure, TR is total revenue, P is
price and Q is quantity demanded), we can summarize the relationship between total
expenditure and the price elasticity of demand as follows:
¾ When demand is price elastic ( ε Pd > 1): when demand is elastic, a small increase in
price results in a large decline in quantity demanded, then total revenue and total
expenditure decline (↑P Q↓ (↑P.Q↓) = ↓TE = ↓TR). Price and total
¾ When demand is inelastic ( ε Pd < 1): when demand is inelastic, a large increase in
price results in a small decline in quantity demanded, then total revenue and total
84
Market Demand, Total Revenue (TR) and Marginal Revenue (MR)
We can derive the total expenditure of consumers (or the total revenue of firms selling
the particular product) from the market demand curve. As seen earlier, total revenue is
the product of the quantity sold and the price, i.e., TR = P.Q.
If the market demand is linear, the TR curve will be a curve which initially slopes
upwards, subsequently reaches a maximum, and then starts declining. We can prove this
from our previous discussion of the relationship between elasticity and TR (or TE).
P
TR
D
TRmax
A / ε Pd / = 1
P1
B
P* TR
P2 C
D’
O Q1 Q* Q2 Q O Q* Q
Another important point in the theory of firm (to be discussed in the third and fourth units
in some detail) is the marginal revenue (MR). The marginal revenue is the change in total
revenue resulting from selling an additional unit of the commodity.
85
P
D
D’
Q
MR
Graphically, MR at any one point is the slope of total revenue curve at that particular
point. If the demand curve is linear, the MR curve is twice as steep as the demand curve.
86
d (aQ - bQ 2 )
MR =
d (Q)
= a – 2bQ.
This proves that the MR curve starts from the same point (a) as the demand curve, and
that the MR is a straight line with a negative slope (-2b) twice as steep as the demand
curve (with a slope of -b).
Proof:
Assume that the demand function is P = f(Q)
The total revenue is TR = PQ = [f(Q)]Q
d ( P)
Above, just before a moment, we have shown that MR = P + Q
d (Q)
dQ P
We also know that the price elasticity of demand could be defined as: ε pd = .
dP Q
Rearranging this definition of elasticity, we obtain:
Q dQ
ε pd . = (criss-cross multiplication).
P dP
P dP
= (taking reciprocal).
Q.ε p
d
dQ
dP P
Substituting = into the expression of the MR, we find:
dQ Q.ε pd
d ( P)
MR = P + Q
d (Q)
P
MR = P + Q
Q.ε pd
87
Q
MR = P(1 + )
Q.ε pd
1
MR = P(1 + )
ε pd
1
MR = P(1 − ) (Since ε pd is negative, ε pd = – / ε pd /)
/ε / d
p
We said that if the demand curve is falling linearly, the total revenue (TR) curve initially
increases, subsequently reaches its maximum, and then starts declining. We can use the
relationship among the marginal revenue (MR), price (P) and ε Pd derived earlier to
establish the shape of the total revenue curve.
¾ The total revenue curve reaches its maximum at the point where / ε Pd / = 1, because
at this point its slope, the MR, is equal to zero. That is,
1
MR = P(1 − ) = P(0) = 0.
1
¾ If / ε Pd / > 1, the TR curve has a positive slope, that is, it is still increasing and
hence has not reached its maximum point.
1 1
If / ε Pd / > 1, then < 1 implying that (1 − ) > 0 . Given that P > 0, then
/ε /d
p / ε pd /
1
MR = P(1 − ) > 0.
/ ε pd /
1
MR = P(1 − ) < 0.
/ ε pd /
88
Activity 8
1. What will happen to the total expenditure of a consumer as a result of a rise in the
price of a commodity if the demand for this commodity is highly price elastic?
Why?
2. What is the value of the price elasticity of demand for a commodity at the mid point
of a linear demand curve?
The traditional theory of demand examined so far implicitly assumed a risk free world. It
assumed that consumers face complete certainty as to the results of the choices they
make. Clearly, this is not the case in most instances. In contrary to our earlier
assumptions of price, income and other variables to be known with certainty, many of the
choices that people make involve considerable degree of uncertainty.
Although risk and uncertainty are usually used interchangeably, some people distinguish
between the two.
(I) Uncertainty: refers to a situation when there are more than one possible outcomes
to a decision-maker and where the probability of each specific outcome is not
known. This may be due to insufficient past information or instability in the
structure of the variables.
(II) Risk: refers to a situation where there are more than one possible outcomes to a
decision-maker and the probability of each specific outcome is known or can be
estimated.
(III) Certainty: refers to a situation where there is only one possible outcome to a
decision and this outcome is known precisely. For example, investing on treasury
bills leads to only one outcome (i.e. the amount of the yield), and this is known
with certainty.
89
Expected Value and Variation of Risky Choices
We usually need two measures to describe and compare risky choices. These measures
are: expected value and variation.
1. Expected value: is the weighted average of all possible payoffs/outcomes that can
result from a decision under the various states of nature, with the probability of those
payoffs used as weights. It measures the value that we would expect on average.
If we multiply each possible outcome or payoff by its probability of occurrence and add
up these products, we get the expected value. If, for instance, there are two possible
outcomes having payoffs X1 and X2 and if the probability of each outcome is given by P1
and P2, then the expected value is:
E(X) = P1X1 + P2X2
Example: If the probability that an oil exploration project will be successful is ¼ and the
probability that it will be unsuccessful is ¾, and if success yields a payoff of 40 Birr per
share while failure yields a payoff of 20 Birr per share, the expected value is:
E(X) = P(success)(yield from success) + P(failure)(yield from failure)
= ¼ (40 Birr/share) + ¾ (20 Birr/share)
= (10 + 15) Birr/share
= 25 Birr/share
2. Variability: is the extent to which the possible outcomes of an uncertain event may
differ. We measure variability by recognizing that large differences between the
actual and expected value imply greater risk.
Standard deviation is the often used measure of variability. Standard deviation measures
the dispersion of the possible outcomes from the expected value. The smaller the value of
the standard deviation (σ), the tighter or less dispersed the distribution is and thus the
lower would be the risk attached to it, and vice versa.
90
Standard deviation (σ) = P1 [ X 1 − E ( X 1 )]2 + P2 [ X 2 − E ( X 2 )]2
If two alternatives to choose from have the same expected value, the one with the
lower/smaller standard deviation is less risky and is hence the preferred one. If, however,
one alternative offers a higher expected value but is much riskier than the other one and
vice versa, the preference depends on the individual – whether he/she is a risk averse, a
risk neutral, or a risk loving person.
1. A Risk Averse Person: is a person preferring a certain income to a risky income with
the same expected value. For a risk averse person, losses are more important (in terms of
the change in utility) than gains. Losses hurt him/her more seriously than gains benefit
him/her. Thus, the marginal utility of income (MUI) diminishes as income rises.
To illustrate, assume that a person can either have a certain income of 20 Birr, or an
alternative decision yielding an income of 30 Birr with probability of 0.5 and an income
of 10 Birr with probability 0.5. The expected income from this second alternative (A2) is:
E(A2) = 0.5(30) + 0.5(10) = (15 + 5) Birr = 20 Birr. This is the same as the income
earned without risk (from the first alternative – A1).
A risk averse person facing this situation prefers to consume the risk free 20 Birr to trying
the alternative in which he/she could have consumed 30 Birr if successful or 10 Birr if
unsuccessful. The figure below makes this point more clear.
91
Utility
18
E
16 B
14 D
C
10 A
0 10 16 20 30 Income
From the figure, we see that utility at point B is greater than utility at point C. The utility
of this risk averse person from the risk free income of 20 Birr is 16 (point B) and the
expected utility from the risky alternative is:
E(U) = 0.5U(10 Birr) + 0.5U(30 Birr)
= 0.5(10) + 0.5(18)
= 14 (point C).
Note that the expected utility, E(U), is the sum of the utilities associated with all possible
outcomes weighted by the probability that each outcome will occur.
The risk averse person achieves the expected utility of 14 at a lower, but a risk free,
income of 16 Birr. That is, a risk free income of 16 Birr gives the same level of
satisfaction as a risky alternative with an expected income of 20 Birr. Thus, he/she is
willing to pay or forgo 4 Birr (20 Birr – 16 Birr = 4 Birr) to avoid taking risk. The
maximum amount of money (4 Birr in our case) that a risk averse person will pay to
avoid taking a risk is called a risk premium.
92
2. A Risk Neutral Person: is a person who is indifferent between a certain income and an
uncertain income with the same expected value. For this person, the marginal utility of
income is constant.
Utility
18
E
12
C
6 A
0 10 20 30 Income
The utility of this risk neutral person from the risk free income of 20 Birr is 12 (point C)
and the expected utility from the risky alternative is:
E(U) = 0.5U(10 Birr) + 0.5U(30 Birr)
= 0.5(6) + 0.5(18)
= 12 (the same point C).
As 12 = 12, the risk neutral person is indifferent between the risky and the risk free
alternatives.
3. A Risk Loving Person: is a person who prefers a risky income to a certain income
given that the risky alternative has the same expected value as the certain income. This
person may prefer an uncertain income to a certain one even if the expected value of the
uncertain income is less than that of the certain income. The expected utility of the
uncertain income is greater than the utility of a certain income for a risk loving person
and thus their utility of income curve is upward bending.
93
Utility
18 E
10.5 C
8
B
3 A
0 10 20 30 Income
The utility of this risk loving person from the risk free income of 20 Birr is 8 (point B)
and the expected utility from the risky alternative is:
E(U) = 0.5U(10 Birr) + 0.5U(30 Birr)
= 0.5(3) + 0.5(18)
= 10.5 (point C).
As 10.5 > 8, the risk loving person prefers the risky alternative to the risk free alternative.
Risk loving people prefer alternatives with high expected value and high standard
deviation (risk) to a lower paying but less risky alternative (unlike the risk averse people).
However, risk loving people are few at least with respect to major purchases or large
amounts of income or wealth.
We also describe the extent of a person’s risk aversion in terms of indifference curves
that relate the expected income to the variability of income, the latter being measured by
the standard deviation.
94
An indifference curve shows the combinations of the expected value and the standard
deviation of income that give the individual the same level/amount of utility. Indifference
curves are upward sloping. This is because risk is undesirable (a ‘bad’) so that the greater
the amount of risk, the greater the amount of income needed to make the individual
equally well-off. An increase in the standard deviation (a higher variability of income)
must be compensated by a higher expected value of income so as to a leave a person on
the same level of utility.
As opposed to the case of a highly risk avert person, a slightly risk avert person requires
only a small increase in expected income, E(I) for a large increase in the standard
deviation of income (σ).
E(I) U3
E(I)
U2
U1
U3
U2
U1
O σ
O σ
Panel (a): Indifference
Curves of Person A Panel (b): Indifference
Curves of Person B
Figure 2.32: Person A is more Risk Averse than Person B
Reducing Risk
In the face of a broad variety of risky situations, people are generally risk averse.
Consumers and managers commonly reduce risk using various ways. The major ones are:
diversification, insurance and obtaining more information.
95
1. Diversification: refers to reducing risk by allocating resources to a variety of activities
whose outcomes are not closely related –“Don’t put all your eggs in one basket.”
2. Insurance: If the cost of insurance is equal to the expected loss, risk averse people will
buy enough insurance to recover fully from any losses they might suffer. For a risk averse
consumer, the guarantee of the same income regardless of the actual outcome generates
more utility than would be the case if that person had a high income when there was no
loss and a low income when a loss occurred.
3. The value of information: People often make decisions based on limited information. If
more information were available, one could make better predictions and reduce risk.
Even though forecasting is inevitably imperfect, it may be worth investing in a marketing
study that provides a reasonable forecast for the future.
UNIT SUMMARY
# The theory of consumer behavior is the basis for the theory of demand.
# There are two approaches for the measurement of utility: Cardinal Utility and
Ordinal utility approaches. The cardinal utility approach argues that utility is
measurable and quantifiable with a unit of measurement of utils while the ordinal
utility approach argues that utility has ordinal value and could only be ordered and
ranked.
# Under the cardinal utility approach, the consumer reaches equilibrium when the
marginal utility of the commodity is equal to its price in the case of one commodity
(MUx = Px), and when the ratio of the marginal utilities of the commodities to their
MUx MUy MUn
prices is equal for all commodities ( = = ............... = ).
Px Py Pn
# Under the ordinal utility approach, using the indifference curve theory, the
consumer reaches equilibrium at the tangency point of the indifference curve and
96
the budget line. At the tangency point, the slope of the indifference curve is the
PX
same as the slope of the budget line ( MRS XY = ).
PY
# The individual demand curve is derived from the equilibrium of the consumer, and
then the market demand is derived from the individual demand curves, as the
horizontal summation of the individual demand curves.
# By using the revealed preference axioms, the revealed preference hypothesis allows
the derivation of the equilibrium of the consumer without the use of the indifference
curves.
# The total effect of a change in price of a commodity, while income and price of
other commodities is constant, can be decomposed into substitution and income
effects. For normal goods, both the substitution and income effects are negative;
and for inferior and giffen goods, the substitution effect is negative but the income
effect is positive. In the case of the inferior goods, the negative substitution effect is
stronger than the positive income effect, and as a result the total price effect is
negative. In the case of giffen goods, the positive income effect is stronger than the
negative substitution effect, and the total effect is positive.
# Elasticity of demand measures the responsiveness of quantity demanded to a change
in one of the determinants of demand. In this module, we have tried to see three
types of elasticities: the price elasticity of demand which is the responsiveness of
quantity demanded to a change in price), the income elasticity of demand (the
responsiveness of quantity demanded to a change in income), and the cross price
elasticity of demand (the responsiveness of quantity demanded of a good to a
change in the price of another related commodity).
# The consumer’s decision with certain income and/or other variables is different
from the decision with uncertain income and/or other variables; hence, the optimum
decision of the consumer is depends on the expected value and variation of income
and the resulting expected utility of the consumer.
97
SELF-TEST QUESTIONS
98
d. the consumer can’t reach equilibrium.
e. None
5. An indifference curve will be L-shaped when the two goods are:
a. perfect substitutes
b. perfect complements
c. imperfect substitutes
d. unrelated
e. bad and good commodities
6. The line joining the different points of consumer’s equilibrium resulting from the
change only in the price of the commodity is called:
a. demand curve
b. income consumption curve
c. Engel curve
d. price consumption curve
e. None
7. One of the following is not a shift factor of the demand curve for a given
commodity.
a. Income of the consumer
b. Price of other related commodities
c. Tastes and preferences
d. Price of the commodity
e. All
f. None
8. If the demand function for a certain commodity is given by Q = 16 – 2P, where Q is
the quantity demanded of the commodity and P is the price of the commodity, what
is the price elasticity of demand when price is equal to 4 Birr per unit?
a. Inelastic
b. Perfectly elastic
c. Perfectly inelastic
d. unitary elastic
e. Elastic
99
9. One of the following is not true about the characteristics of well-behaved
indifference curves.
a. Indifference curves do not intersect
b. Indifference curves have negative slope
c. Indifference curves are concave from the origin
d. Indifference curves farther from the origin represent higher utility
e. None
10. If the utility function of a consumer is given by U = X2Y2, what is the MRSxy?
a. Y/X
b. X/Y
c. X/Y2
d. Y2/X
e. X2/Y
f. X/Y3
11. When we rank the utility gained from the consumption of different commodities as
1st , 2nd and 3rd etc, we are measuring utility:
a. ordinally
b. cardinally
c. in both approaches
d. traditionally
12. If price of an inferior good (which is not giffen) is rising,
a. the substitution effect decreases but the income effect increases the
quantity consumed of the commodity, and as a result the total effect is a
decrease in quantity.
b. both the substitution and the income effects increase the quantity
consumed of the commodity, and as a result the total effect is an increase
in the quantity demanded of the commodity.
c. both the substitution and the income effects increase the quantity
consumed of the commodity, but the total effect is a decrease in the
quantity demanded of the commodity.
100
d. both the substitution and the income effects decrease quantity consumed
of the commodity, and as a result the total effect is an increase in the
quantity demanded of the commodity.
e. the substitution effect increases but the income effect decreases the
quantity consumed of the commodity, but the total effect is an increase in
quantity.
1. The revealed preference hypothesis is different from the indifference curves theory
as the revealed preference hypothesis determines the equilibrium of the consumer
without the use of the indifference curves, unlike that of the indifference curves
theory.
2. The level of satisfaction is the same for a consumer along the same indifference
curve.
3. Income elasticity of demand for a good is always positive
4. For a normal good, both the Engel curve and the demand curve are positively
sloped.
5. The firm’s total revenue decreases for an increase in price of the commodity if
demand is price inelastic.
101
c. Income offer curve and price offer curve
d. Normal good and inferior good
e. Ordinal utility and cardinal utility
f. Indifference curve theory and revealed preference hypothesis
3. Explain the interpretation of MRSy,x is 12.
4. Suppose that the consumer is asked to contemplate a gamble with a probability of
60% of winning Birr 10,000 with a utility of 10 utils, and a 40% probability of
winning Birr 15,000 with a utility of 12 utils.
a. What will be the expected income and expected utility of the consumer?
b. If the utility of this consumer from a risk free alternative which gives him
an income equal to the expected income of the risky alternative given
above is equal to 11 utils, is this consumer risk lover or risk averse? Why?
Illustrate your answer with the help of a diagram.
5. Given MUx = X, MUY = 4Y, Price of X is 3 Birr per unit and price of Y is also 3
Birr per unit. If the income of the consumer is 1200 Birr, find the amounts of X and
Y that the consumer chooses to consume so as to maximize his utility.
6. Given the demand function P = 20 – 5Q, find the price elasticity of demand when
price of the commodity is 5 Birr per unit. Mention if the demand is price elastic or
inelastic at this point.
7. Explain the substitution and income effects of a price rise for a normal good using a
diagram.
8. Suppose Martha earns an of income 400 Birr currently, and her utility function is
given by: U(m) = 4m, where m represents income. She has two options:
Option 1: to buy a share. If she is successful her income will be 700 Birr and if she
is not successful her income will be 100 Birr.
Option 2: to do nothing and keep on earning 400 Birr.
Assuming that success and failure are equally likely,
a. What would be her expected income if she buys the share?
b. What would be her expected utility of buying the share?
c. Would Martha buy the share? Why?
d. Is Martha risk averse, risk lover or risk neutral?
102
UNIT THREE
THEORY OF PRODUCTION
UNIT INTRODUCTION
So far we saw one side of the market for a commodity – the demand side. In discussing
the behavior of consumers and deriving the demand for a commodity, we assumed that
the commodity is available on the market. But, who makes this commodity available on
the market? And, how does this supplier decide on the amount of the commodity to be
produced and on the techniques of production that should be used? These questions are
addressed by theories of the firm – theory of production and theory of costs. Postponing
the discussion of the theory of costs to the next unit, we will see the theory of production
in this one.
UNIT OBJECTIVES
103
production) into output is defined at a particular time period and at a given technology.
By technology we mean the state of knowledge about the various methods that might be
used to transform inputs into outputs, and it is described by a production function.
The production function is a function that shows the highest output that a firm can
produce for every specified combination of inputs. It is a purely technical relation which
connects factor inputs to outputs. Assuming labor (L) and capital (K) as the only inputs,
the production function can be written as: Q = f(L, K); where Q stands for the total
quantity produced of an output/product.
units of Labor
2 3 1
units of Capital
3 2 4
These activities or methods of production can be shown by lines from the origin to the
point determined by the labor and capital inputs combination.
104
K
3 P1
P2
2
1 P3
0 2 3 4 L
The production function, which is a purely technical relationship that connects factor
inputs and outputs, includes all the technically efficient methods of production. The
technically inefficient methods are not included in the production function.
A method of production ‘A’ is technically efficient if it uses less of at least one input and
no more of the other factors to produce a given level of output as compared with any
other method ‘B’. For example, suppose commodity Y can be produced by two methods
(Method A and Method B) as shown below:
Method A Method B
Labor 2 3
Capital 3 3
105
The basic theory of production concentrates only on the efficient methods, and thus
inefficient methods are excluded as a rational producer will not used them. If a process A
uses less of one factor (say, L) and more of another (say, K) as compared to B, then A
and B cannot be directly compared on the criterion of technical efficiency. For example,
the two activities in the table below are not directly comparable.
Method A Method B
Labor 2 1
Capital 3 4
In such cases, both processes are considered as technically efficient and included in the
production function. Which one of them will be chosen at any particular time depends on
the price of factors (inputs). The choice of any particular technique among the set of
technically efficient processes is an economic one, which is based on the price of factors
of production. Note that a technically efficient method is not necessarily economically
efficient.
An isoquant: is the locus of all the technically efficient methods (or all the technically
efficient combinations of factors of production) for producing a given level of output. It
is a curve showing all the possible combinations of inputs that yield the same level of
output. Isoquants may assume different shapes depending on the degree of substitutability
between the factors of production. The following are the common ones:
106
1. Linear isoquant: this type assumes perfect substitutability of factors: a given output
may be produced by using only labor, or only capital, or by an infinite number of
combinations of K and L. See Panel (A) of Figure 3.2 below.
4. Smooth or convex isoquant: this form assumes a continuous (and a less than perfect)
substitutability between factors (K and L) only over a certain range, beyond which factors
cannot substitute each other. The isoquant is a smooth curve which is convex to the
origin. This is depicted in Panel (D) of the figure below.
Even though the kinked isoquant is more realistic, most of the time the smooth or convex
isoquant is used in the traditional economic theory because it is mathematically simpler
to handle by the simple rules of calculus.
107
K
K
X (Level of
Output)
X
O L O L
Panel (A): A Linear Isoquant Panel (B): A Leontief Isoquant
P1
P2
X
P3
X
P4
O L O L
Panel (C): A Kinked Isoquant Panel (D): A Convex Isoquant
An Isoquant map: is simply a set of several isoquants. An isoquant map is another way of
describing a production function, just as an indifference map (discussed in Unit Two) is a
way of describing a utility function. The level of output increases as we move upward to
the right where as it remains constant along an isoquant (See points A, B and C in the
108
figure below; 100 units of good X are produced both at A and C while 50 units are
produced at B).
K
A
C
B
X = 100
X = 50
O L
Activity 9
The production function in the traditional theory generally assumes the form:
X = f(L, K, r, y)
109
Where L is labor, K is capital, r is returns to scale which refers to the long run analysis of
the laws of production since it assumes change in the plant, and y is the efficiency
parameter related to the organizational and entrepreneurial aspect of the production.
We usually abstract from the availability of many factors of production to two factors of
production (L and K) only in order to simplify things. In this simplified case, any change
in the amount of factors other than L and K is considered to shift a production function.
The short run production function and its behavior for a change in amount of the fixed
factors (as time goes to the long run) can be shown graphically, as follows:
X X’’ = f(L)k3,r3,y3
X’ = f(L)k2,r2,y2
X = f(L)k1,r1,y1
O L
Figure 3.4: The Short Run Production Function and How It Shifts as the Amount
of Fixed Factors of Production Change with the Passage of Time
In Figure 3.4, the quantity of output X produced is drawn as a function of the amount of
labor, for fixed amounts of the other factors. For a given curve (X), as labor increases,
ceteris paribus (the others factors fixed at k1, r1 and y1), output increases and we move
along the curve depicting the production function. If any one or all of the fixed factors
(K, r, y) increases, the production function shifts upwards. If, for instance, the levels of
the three fixed inputs rise from (k1, r1 and y1) to (k2, r2 and y2), the curve X shifts upward
to X’’, and so on.
110
The time period for which we assume that some factors are fixed in amount is called the
short run. Thus, curve X in the figure above is drawn for the short run. If we could
increase (or change in general) the amount of all factors, then we are in a long run.
The slope of the production function (say, X = f(L)) is the marginal product of the factor
of production L (MPL) . Similarly, the slope of the production function X = f(K) is the
marginal product of capital (MPK). The marginal product of a factor is defined as the
change in output resulting from the change in the factor by a unit, keeping all other
factors constant. That is:
∂X ∂X
MPL = and MPK = .
∂L ∂K
Graphically, the MPL is shown by the slope of the production function X = f(L) and the
MPK is shown by the slope of the production function X = f(K). As you remember from
Unit Two, the slope of a curve at any one point is the slope of a tangent line at that point.
The average product of an input is the total product divided by the units of the input used
to produce it. Graphically, the average product of a factor at a given point is given by the
slope of a straight line from the origin to the point.
Let’s derive the average product and marginal product of labor from the total product of
labor graphically. By doing so, we will also distinguish among three stages of production.
As shown in Panel (A) of Figure 3.5, as the units of labor used in the production process
goes on increasing, the output initially increases at an increasing rate (up to point A), then
rises at a decreasing rate (from point A to point C), reaches a maximum (at point C), and
then starts falling.
As a result, since marginal product is the slope of the total product curve, the marginal
product of labor initially increases, reaches maximum, and then starts declining. The
marginal product of labor (MPL) is even negative when the total product declines (beyond
point C). The average product of labor (APL), which is the slope of the line drawn from
111
the origin to the corresponding point on the total product (TPL) curve, initially increases,
reaches maximum (at point Z) and then starts declining. The APL and MPL curves are
shown in Panel (B) of the same figure.
X C
D
B
Z TP = f(L)
O LA LZ LB LC LD L
MPL
APL
A’
Z’ Panel (A): The MPL and APL Curves
C’
APL
O LZ’ LC’ L
MPL
Figure 3.5: The Relationship among TPL, MPL and APL
112
Now, let us study the three stages of production. Figure 3.6 below is partly reproduced
from Panel B of the above figure to assist us to this end.
Accordingly, we divide this production function into three stages as: Stage I (from zero
TPL up to the maximum of APL), Stage II (from the maximum of APL to zero MPL), and
Stage III (from zero MPL onwards).
MPL
APL Stage I Stage II Stage III
Z’
C’
APL
O LZ’ LC’ L
MPL
At stage I, MPL > APL, and both of them are rising initially while MPL falls latter on.
Since each additional unit of labor is coming up with a contribution larger than the
average (MPL > APL), it is rational to hire more labor and produce more output. Thus, it
is not reasonable to produce at this stage. A rational producer (firm) observes that using
more labor is preferred to the existing situation and thus moves out of this stage.
At the third stage, where both APL and MPL are declining and MPL < APL, it is not
rational to produce at all because each additional unit of labor makes the total product to
decline (i.e. its contribution is negative).
Thus, it is in the second stage that a rational firm operates. Here each additional labor
contributes positively to the production but less than the average. Where exactly in this
stage does a rational firm produce? The answer is, it depends on factor prices.
113
At this stage as the use of a variable input (labor) increases with other inputs (like capital)
being fixed, the resulting additions to output (MPL) will eventually decrease. This manner
is captured by a principle known as the law of variable proportions or the law of
diminishing marginal returns.
In summary, the production theories concentrate only on the efficient part of the
production function, that is, on the ranges of output over which the marginal
productivities are positive but declining. The second stage of production in the above
analysis corresponds to this efficient stage in the short run. No rational firm would
employ labor less than OLZ’ or beyond OLC’ (in Figure 3.6). This means over the range
∂ ( MPL )
where MPL > 0 but <0
∂L
In the long run, where all factors of production (L and K for simplicity) are variable, we
use isoquants to define the rational/efficient stage of production. In this case, the
traditional theory of production defines the rational stage of production as the range of
the isoquants over which their slopes are negative and convex to the origin. In the figure
below, the production function is depicted by a set of isoquants.
The locus of points of isoquants where the marginal products of the factors are zero
forms the ridge line. At points a, b and c, the MPK is zero. This forms the upper ridge
line. Similarly, the lower ridge line shows the path along which the MPL is zero (points d,
e and f). Outside the ridge lines the marginal product of the factors is negative and the
methods of productions are inefficient, since they require more quantities of both factors
for producing a given level of output. Thus, production techniques are efficient only
inside the ridge lines.
114
K c Upper Ridge Line (MPK = 0)
b
a
Lower Ridge Line (MPL = 0)
f
e
d
O L
Figure 3.7: The Ridge Lines and the Region of Efficient Production
The slope of the isoquant (in absolute value) defines the degree of substitutability of the
dK
factors of production. As we move downwards along the isoquant, the slope ( = − )
dL
decreases in absolute terms, showing the increasing difficulty in substituting L for K.
The absolute value of the slope of the isoquant is called the rate of technical substitution,
or the marginal rate of technical substitution (MRTS) of factors:
dK
MRTS LK = = − slope of an isoquant
dL
MRTSLK is defined as the amount of K that the firm must sacrifice in order to use one
more unit of L so that it produces the same level of output.
It can be proved that the MRTSLK is equal to the ratio of the marginal products of the
factors.
∂X
That is, MRTS LK =
dK
= ∂L = MPL
dL ∂X MPK
∂K
115
Proof:
The production function can be written as X = f(K,L) = C. It is equal to C because the TP
is constant along an isoquant.
The slope of a curve is the slope of a tangent line at that point. The slope of a tangent line
is defined by the total differential. The total differential (dX) is zero along an isoquant
since the TP is constant. Thus,
∂X ∂X
dX = ( )dK + ( )dL = 0
∂K ∂L
Ö ( MPK )dK + ( MPL )dL = 0
Ö − ( MPK )dK = ( MPL )dL
dK MPL
Ö − = which is the definition of the MRTSLK
dL MPK
The MRTS as a measure of the degree of substitutability of factors has a serious defect
since it depends on the units of measurement of the factors. A better measure of factor
substitutability is provided by the elasticity of factor substitution (σ). It is given by:
Percentage Change in K
σ= L
Percentage Change in MRTS LK
d( K L)
( K L)
σ=
d ( MRTS LK )
( MRTS LK )
116
The elasticity of substitution is a pure number independent of the unit of measurement of
K and L since both the numerator and the denominator are measured in the same unit.
Factor Intensity
Factor intensity refers to a measure of the intensity of a method of production in the sense
that it measures whether a given method of production is labor intensive (uses more labor
and less capital) or capital intensive (uses more capital and less labor). It can be measured
by the slope of the line from the origin to a particular point on the isoquant representing a
particular process. Or equivalently, it is measured by the capital labor ratio at a particular
point.
In the figure below, process P1 is more capital intensive than process P2 because the slope
K1 K
of line OP1 is higher than the slope of line OP2 or the ratio is greater than 2 . This
L1 L2
implies that the upper part of the isoquant includes more capital intensive techniques
where as the lower part includes more labor intensive techniques.
P1
K1
P2
K2
O L1 L2 L
117
Example:
Let us illustrate the above concepts with a specific form of production function, namely
the Cobb-Douglas production function. This form is the most popular in applied research,
because it is easier to handle mathematically. It is of the form:
X = ALb K c
= b( X ) L−1
X
= b( )
L
= b( APL )
∂X X
Similarly, MPK = = cALb K c −1 = c( ) = c( APK )
∂K K
2. The marginal rate of substitution of labor for capital:
∂X b( X ) bK
MRTS LK = ∂L = L = .
∂X c( X ) cL
∂K K
3. The elasticity of substitution:
d( K L)
( K L)
σ=
d ( MRTS LK )
( MRTS LK )
d( K L)
( K L)
σ=
d (bK cL)
(bK cL)
d( K L) (bK cL)
σ= .
( K L) d (bK cL)
d( K L) (b c).( K L)
σ= •
( K L) (b c).d ( K L)
118
d( K L) ( K L)
σ= • = 1.
( K L) d ( K L)
4. Factor intensity: In a Cobb-Douglas function factor intensity is measured by the
ratio b . The higher the ratio, the more labor intensive the technique is and vice
c
versa.
X X
Given that MPL = b( ) , we can rearrange to find that L = b( ).
L MPL
X X
Similarly, MPK = c( ) gives us K = c( )
K MPK
b( X )
L MPL
Then, =
K c( X )
MPK
b( MPK )
=
c( MPL )
b
= MRTS LK
c
b
= since MRTSLK = 1 (as shown above).
c
b L
The higher the ratio means the higher the ratio, and hence the technique is labor-
c K
intensive.
5. The efficiency of production. The efficiency in the organization of factors of
production is measured by the coefficient A. It is clear that if two firms have the same
K, L, b and c, and still produce different quantities of output, the difference can be
due to the superior organizational and entrepreneurial quality of one firm. The more
efficient firm will have a higher A than the less efficient one.
6. The returns to scale. In the Cobb-Douglas production function, the returns to scale are
measured by the sum of the coefficients b + c. This point will be discussed latter on.
119
Activity 10
1. Distinguish between the following and show their importance in production theory:
(a) short run and long run
(b) variable input and fixed input
(c) the upper and the lower ridge lines
2. Define and distinguish between marginal product and average product. Draw the
marginal product and average product curves from your own hypothetical data. And
check whether there is any relation between them.
3. Define marginal rate of technical substitution. Why does it decrease along the
isoquant?
4. What is factor intensity? When do we say a technique of production is labor
intensive? When is capital intensive?
5. What is elasticity of factor substitution?
The laws of production describe the technically possible ways of increasing the level of
production. This can be done in various ways. Output can be increased by changing all
factors of production which is possible in the long run. This is called the law of returns to
scale. On the other hand, output can be increased by changing only the variable input
while keeping the fixed inputs constant, which is possible in the short run. Let us see
these laws one by one.
This is a law for the case of short run where there is at least one fixed input. The MP of
the variable factor will decline eventually as more and more quantities of this factor are
combined with the fixed amounts of other factors. This is known as the law of variable
proportions. In our earlier discussion of the short run production function and stages of
production, we have assumed labor as a variable input and capital as a fixed input. From
120
that graph, what we can understand is that as the use of a variable input (labor) increases
with other inputs (capital) fixed, the resulting addition to output will eventually
decreases. This is shown by a downward sloping MPL curve after its maximum point.
This principle is known as the law of variable proportion or the law of Diminishing
returns.
The law of returns to scale refers to the long run analysis of production. In the long run,
where all inputs are variable, output can be increased by changing all factors by the same
proportion. The rate at which output increases as inputs are increased by the same
proportion is called returns to scale. We have three cases of returns to scale: increasing,
constant and decreasing returns to scale.
Increasing returns to scale: this is the case where increasing all factors by the same
proportion, say m, leads to an increase in output by more than m scale.
Constant returns to scale: if we increase all inputs by some factor m and output is
increases by the same proportion as inputs, m, and then it is called constant returns to
scale. In this case the size of the firm’s operation doesn’t affect the productivity of its
factors.
Decreasing returns to scale: if scaling up all inputs by m scales output up by less than m,
it is called decreasing returns to scale. This is because, may be difficulties in organizing
and running a large scale operation leads to decreased productivity of both labor and
capital.
Examples:
1. Suppose Q = 2K + 3L. To tell the returns to scale, we will increase both K and L by a
factor m and create a new production function Q*. Then we will compare Q* and Q.
121
Q* = 2(mK) + 3(mL)
= 2mK + 3mL
= m(2K + 3L)
= mQ.
After factoring, we can replace (2K + 3L) by Q, as we were given that from the start.
Since doing so gives Q* = mQ, we note that by increasing all of our inputs by the
multiplier m, we have increased production exactly by a factor of m. So we have
constant returns to scale.
2. Q = 0.5KL. Again we put in our multipliers and create our new production function.
Q* = 0.5(mK)( mL)
= 0.5KLm2
= Qm2. Since m > 1, then m2 > m. This implies that our new production has
increased by more than m. so we have increasing returns to scale.
3. Q = K0.3L0.2. Again we put in our multipliers and create our new production function.
Q* = (mK)0.3(mL)0.2
= K0.3L0.2m0.5
= Qm0.5. Since m > 1, then m0.5 < m. So we have decreasing returns to scale.
Suppose we increase both factors of production in the function X = f(L,K) by the same
proportion m, and we observe the resulting new level of output X* as X* = f(mK,mL). If
m can be factored out (that is, can be taken out of the bracket as a common factor), then
the new level of output can be expressed as a function of m (to the power n) and the
initial level of output X as follows: X* = mnf(L,K) or X* = mnX. If so, the function is
called homogeneous. If m cannot be factored out, the production function is called non-
homogeneous. The above three examples are homogeneous functions since m can be
factored out in each case.
122
Thus, a homogeneous function is a function such that if each of the inputs is multiplied
by m, then m can be completely factored out of the function. The power n of m is called
the degree of homogeneity and is a measure of the returns to scale.
¾ If n = 1, we have a constant returns to scale.
¾ If n < 1, we have a decreasing returns to scale.
¾ If n > 1, we have an increasing returns to scale.
Proof
Let L and K increases by m. The new level of output is
X* = A(mL)b(mK)c
= AmbLbmcKc
= Amb+cLbKc
= mb+c(ALbKc)
X* = mb+c(X)
This implies the function is homogeneous of degree b+c and the type of the returns to
scale depends on the sum.
Product Line: It shows a physical movement from one isoquant to another as we change
either both factors and a single factor. It describes the technically possible alternative
paths of expanding output. What path will actually chosen by the firm will depend on the
prices of factors.
The product curve passes through the origin if both factors are variable. But if only one
factor is variable (the other being kept constant), the product line is a straight line parallel
to the axis of the variable factor.
123
K K K
O L O L O L
A special type of product line which is the locus of points of different isoquants at which
the MRTS of factors is constant is called an isocline. For homogeneous production
functions, the isoclines are straight lines through the origin. In such a case, the K/L ratio
is constant along any isocline (refer to the Panel A of Figure 3.9).
Activity 11
1. What is the law of variable proportions? How does it differ from the laws of returns
to scale?
2. How is the degree of homogeneity of a production function related to the returns to
scale of the production function?
124
3.5 EQUILIBRIUM OF THE FIRM: CHOICE OF OPTIMAL
COMBINATION OF FACTORS OF PRODUCTION
A firm is said to be in equilibrium when it employs those levels of inputs that will
maximize its profit. This means the goal of the firm is profit maximization (maximizing
the difference between revenue and cost). Thus the problem facing the firm is that of
constrained profit maximization, which may take one of the following forms:
I. Maximizing profit subject to a cost constraint. In this case, total cost and prices are
given and the problem may be stated as follows:
Max П = R – C = PxX – C
Clearly maximization of П (profit) is achieved in this case if X (quantity of output) is
maximized, since C (cost) and Px (price of the product) are constants.
II. Maximize profit for a given level of output.
Max П = R – C = PxX – C
Clearly in this case maximization of profit is achieved by minimizing cost, since X
and Px are given.
To derive the equilibrium of the firm graphically, we will use the isoquant map and the
isocost lines. As discussed earlier, an isoquant is a curve that shows the various
combinations of K and L that will give the same level of output. It is convex to the origin
whose slope is defined as:
∂X
−
dK
= ∂L = MPL
dL ∂X MPK
∂K
The isocost line is defined by the cost equation:
C = rK + wL;
where w = wage rate, and r = price of capital services.
The isocost line is the locus of all combinations of factors that the firm can purchase with
a given monetary cost or outlay. The slope of the isocost line is equal to the ratio of the
w
prices of the factors of production in absolute terms, − .
r
125
From the isocost equation given by: C = wL + rK
=> rK = C - wL
C w
=> K = − L.
r r
w
From this the slope is −
r
K C
r
O C L
w
Now, let us see how the equilibrium of the firm is determined in the two cases mentioned
above.
Given the level of cost and the price of the factors and output, the firm will be in
equilibrium when it maximizes the quantity of output it produces. This is at the point of
tangency of the isocost line to the highest possible isoquant curve.
In the following graph (Figure 3.11), the equilibrium of the firm is obtained at point e,
where the firm produces X2 with K1 and L1 units of the two inputs. Higher levels of
output (to the right of e) are desirable but not attainable due to the cost constraint. Other
points below the isocost line lie on a lower isoquant than X2. Hence X2 is the maximum
output that can be achieved given the above assumptions (C, w, r and Px being constant).
126
K
K1 e X3
X2
X1
O L1 L
Figure 3.11: Maximizing Output subject to Cost
This is a constrained optimization which can be solved by using the Lagrangean method.
The steps are:
a. Rewrite the constraint in the form:
wL + rK – C = 0
b. Multiply the constraint by a constant λwhich is the Lagrangean multiplier:
λ(wL + rK – C) = 0
127
c. Form the composite function:
Z = X – λ(wL + rK – C)
d. Partially differentiate the function with respect to each factor as well as the
multiplier, and then equate to zero.
∂Z ∂X
* = − λw = 0
∂L ∂L
Ö MPL = λw
MPL
Ö λ= …………………………………………………………………… (1)
w
∂Z ∂X
* = − λr = 0
∂K ∂K
Ö MPK = λr
MPK
Ö λ= …………………………………………………………………… (2)
r
∂Z
* = wL + rK − C = 0
∂λ
Ö wL + rK = C ……………………………………………………………… (3)
MPL MPK w MPL
From equations (1) and (2) we understand that: = or = = MRTS LK
w r r MPK
This shows that the firm is in equilibrium when it equates the ratio of the marginal
productivity of each factor to its price. It can be shown that the second order conditions
for the equilibrium of the firm require that the marginal product curves of the two factors
have a negative slope.
∂ ( MPL ) ∂ 2 X
Slope of the MPL = = < 0,
∂L ∂L2
∂ ( MPK ) ∂ 2 X
Slope of the MPK = = < 0, and
∂K ∂K 2
∂2 X ∂2 X ∂2 X 2
. < ( ) .
∂L2 ∂L2 ∂L.∂K
128
Case 2: Minimization of Cost for a Given Level of Output
The condition for the equilibrium of the firm is formally the same as in case 1. That is,
there must be tangency of the given isoquant and the lowest possible isocost line, and the
isoquant must be convex. However, in this case we have a single isoquant which denotes
the desired level of output, but we have a set of isocost lines.
Curves closer to the origin show a lower total cost outlay. Since isocosts are drawn on the
assumption of constant prices of factors, they are parallel to each other and their slopes
w
(− ) are equal.
r
Thus, the firm minimizes its cost by employing the combination of K and L determined
by the point of tangency of X isoquant with the lowest possible isocost line. Points below
e in Figure 3.12 below are desirable because they show lower cost but are unattainable
for output X. Points above e show higher costs. Hence, point e is the least cost point.
K1 e
X
O L1 L
In this case also, the Lagrangean method can be followed to derive the equilibrium
condition mathematically. But the problem is different. That is,
Minimize C = wL + rK subject to X* = f(K,L)
129
a. The Lagrangean function will be:
Z = (wL + rK) + λ[X*- f(K,L)]
b. Partially differentiate Z with respect to L, K and λ and equate to zero.
∂Z ∂f ( L, K )
* = w−λ =0
∂L ∂L
Ö w = λ .MPL
w
Ö λ= …………………………………………………………………… (1)
MPL
∂Z ∂f ( L, K )
* = r −λ =0
∂K ∂K
Ö r = λ .MPK
r
Ö λ= …………………………………………………………………… (2)
MPK
∂Z
* = X * − f ( L, K ) = 0
∂λ
Ö X * = f ( L, K ) …………….………………………………………………… (3)
w r w MPL
From equations (1) and (2) we understand that: = or = = MRTS LK
MPL MPK r MPK
This is the same as the condition in case one. In a similar way, the second condition will
be:
∂ ( MPL ) ∂ 2 X
Slope of the MPL = = < 0,
∂L ∂L2
∂ ( MPK ) ∂ 2 X
Slope of the MPK = = < 0, and
∂K ∂K 2
∂2 X ∂2 X ∂2 X 2
. < ( ) .
∂L2 ∂L2 ∂L.∂K
The following numerical example clarifies the optimization of a firm for the two cases
discussed above.
130
Example: If the production function of a firm is given by Q = K 2 L3 , and the input prices
are r = Birr 8 per unit and w = Birr 2 per unit,
a. Find the levels of labor and capital that maximize the level of output for a total
outlay of Birr 240.
b. Find the units of labor and capital that minimize the cost of the firm for producing
53,747,712 units of output.
Solution:
w MPL
The equilibrium condition (from case 1 above) is given by: = .
r MPK
∂Q ∂Q
MPL = = 3K 2 L2 , and MPK = = 2 K 1 L3 .
∂L ∂K
w MPL 2 3K 2 L2
Thus, = ⇒ = .
r MPK 8 2 KL3
1 3K 12 K 2 L
⇒ = ⇒ 12 K = 2 L ⇒ = ⇒ L = 6K .
4 2L 2 2
Substitute L = 6 K into the budget constraint: 240 = 2 L + 8 K and solve.
240 = 2 L + 8 K ⇒ 240 = 2(6 K ) + 8 K ⇒ 240 = 12 K + 8 K
⇒ 240 = 20 K
240 20 K
⇒ =
20 20
⇒ K = 12
Since L = 6K, we also have L = 6 K ⇒ L = 6(12) = 72.
The output maximizing levels of labor and capital under the given constraints (or, the
optimum combination of labor and capital) are L = 72 units and K = 6 units.
w MPL
The equilibrium condition (from case 2 above) is given by: = .
r MPK
131
∂Q ∂Q
MPL = = 3K 2 L2 , and MPK = = 2 K 1 L3 .
∂L ∂K
w MPL 2 3K 2 L2
Thus, = ⇒ = .
r MPK 8 2 KL3
1 3K 12 K 2 L
⇒ = ⇒ 12 K = 2 L ⇒ = ⇒ L = 6K .
4 2L 2 2
Substitute L = 6 K into the output constraint: Q = K 2 L3 = 53,747,712 and solve.
Q = K 2 L3 = 53,747,712
⇒ K 2 (6 K ) 3 = 53,747,712
⇒ K 5 6 3 = 53,747,712
⇒ 216 K 5 = 53,747,712
53,747,712
⇒ K5 = = 248832
216
K = 5 248832 = 12
Hence, L = 6 K = 6(12) = 72.
The cost minimizing levels of labor and capital under the given constraints (or, the
optimum combination of labor and capital) are L = 72 units and K = 6 units.
Verify that the second order conditions are fulfilled in both cases!
Activity 12
1. What is the necessary condition for a firm to maximize production given a fixed total
outlay? Is this the same as the necessary condition required for minimizing cost for a
given level of output?
132
UNIT SUMMARY
SELF-TEST QUESTIONS
133
a. average and marginal output increase at the same rate
b. average product increases faster than the marginal product
c. marginal product increases faster than the average product
d. marginal product equals average product
4. When total production increases at increasing rates, then
a. average and marginal output increase at the same rate
b. average product increases faster than the marginal product
c. marginal product increases faster than the average product
d. marginal product equals average product
5. In case of a convex isoquant, as we move from left to right, MRTSLK:
a. decreases at a decreasing rate,
b. decreases at increasing rate,
c. neither increases nor increases,
d. increases along the isoquant.
6. When an isoquant is L-shaped, then
a. MRTSLK = 0
b. MRTSLK > 1
c. MRTSLK < 1
d. MRTSLK = 1
7. When MRTSLK = 1, then
a. MPL / MPK = 2
b. MPL / MPK = 1
c. MPL / MPK =0
d. MPL / MPK = ∞
8. Laws of variable proportion are associated with:
a. change in the variable input
b. change in all the inputs
c. change in return to scale
d. None of the above
9. The law of diminishing returns implies that:
a. quantity of an input is decreasing
134
b. quantity of an input is increasing
c. quantity of output is either increasing at a decreasing rate or decreasing.
d. None of the above
10. The law of diminishing returns comes into force because of:
a. indivisibility of variable input
b. indivisibility of fixed factors
c. indivisibility of both variable and fixed factors
d. indivisibility of products
11. Laws of returns to scale apply only when there is:
a. a change in one input only.
b. proportionate and simultaneous changes in all inputs.
c. disproportionate change in inputs
d. more than proportionate changes in outputs
12. A Cobb-Douglas production function shows:
a. A constant returns to scale,
b. An increasing returns to scale,
c. A decreasing returns to scale
d. One of the three returns to scale
13. The laws of variable proportions and the laws of returns to scale:
a. Are exactly the same
b. Are different and have no similarity
c. Are similar but not exactly identical.
d. No answer
14. Expansion path is a strait line when production function is:
a. Homogeneous
b. Non-homogeneous
c. Of any form
135
UNIT FOUR
UNIT INTRODUCTION
In the previous unit, we saw the laws of production, i.e., how output is changed when the
amounts of input(s) are changed. The laws of production are expressed in terms of
physical quantities, e.g., labor as number of workers, capital as unit of plants or
machinery, and output as unit or some other measurements of output, e.g., tones or
quintals of wheat.
However, most decisions regarding price and production are taken on the basis of money
value of inputs and outputs. In this unit we go beyond the technical analysis of the theory
of the firm – theories of production – and look at the economic analysis in firms’ decision
making process. The two units (Units Three and Four) together make up a complete
discussion of the behavior of business firms. Do you recall that, in the theory of
consumer behavior of Unit Two, we derived the demand for a commodity? As you
complete this unit, you would be ready to derive the other component of a market – the
supply of a commodity, and to bring together the two sides (the demand and supply sides)
of a market in the subsequent units.
UNIT OBJECTIVES
136
¾ product curves and cost curves
¾ short-run and long-run average and marginal costs; and
# derive the cost function from the production function.
Cost functions are derived functions (derived from production functions). Economic
theory distinguishes between short-run and long-run costs. Both in the short-run and in
the long-run, total cost is a multivariate function, i.e., total cost is determined by many
factors such as output, technology, prices of variable and fixed factors. To simplify the
analysis, we consider cost as a function of output [C = f(X)] on a ceteris paribus
assumption. Thus, determinants of costs, other than output, are called shift factors.
In theory of the firm, the short run is defined as any time period in which the quantity of
at least one input (factor of production) cannot be changed. Practically, this is a time
period that is so short that the firm cannot alter its current plant size. In other words,
during the short run, a firm works with whatever heavy equipment and factory size it
already has. No matter how much more it wants to produce, say because of an increase in
the demand for its product, it cannot change its plant size in the short run. However, it
may change the amount of other inputs like labor. Thus, in the short run, we have two
types of inputs – fixed inputs and variable inputs.
The following are the types of cost a firm incur to produce a given good in the short run:
Total Costs (TC): are all costs of a firm incurred to produce goods and services. The
total cost (TC) includes both implicit costs (sacrifices) and explicit (out of pocket) costs.
The total cost can be divided into two: the Total Fixed Cost (TFC) and the Total Variable
Cost (TVC), i.e., TC = TFC + TVC
Total Fixed Costs (TFC): are those costs that must be incurred by the firm whether or
not production takes place, or whether the firm produces less or more quantity of a given
137
product. In other words, these are costs that do not fluctuate/vary with the level of output;
whether the firm changes (increases or decreases) its production level or not, they remain
unchanged.
C= Cost
TFC
O Q
Total Variable Costs (TVC): are the costs of production that vary with the level of
output the firm produces. Unlike the total fixed costs, these costs depend on the level
(amount) of output produced. If the firm wants to increase its production, it must use
more of the variables inputs and incur more variable costs. If there is no production, there
will be no variable input used, and thus, there won’t be any variable cost incurred.
138
Examples of the total variable costs include:
¾ Payments for raw materials used for production (like cotton in textile factory,
seed in agriculture, etc.),
¾ Electricity bills,
¾ Wage payments for direct labor,
¾ The running expenses of fixed capital, such as fuel, ordinary repairs and routine
maintenance.
The total variable cost has usually an inverse-S shape, which reflects the law of variable
proportions. According to this law, at the initial stage of production with a given plant
size, as more of the variable factor is employed, its productivity increases and thus total
variable cost(TVC) increases at a decreasing rate. For example, to increase the level of
output by one unit may require one more worker, and if the price of this additional
worker (the wage rate) is 10 Birr (per given period of time), the TVC increases by 10
Birr.
As the productivity of the variable input (labor) falls, larger and larger units of the
variable input will be needed to increase output by the same unit. To continue with our
hypothetical example, two more workers may be needed to increase output by a unit in
which case the TVC increases by 2x10 = 20 Birr. Thus, the total variable cost (TVC) first
increases at a slower rate and then at an increasing rate because of the law of variable
proportions (discussed in Unit Three).
Since the TC is the sum of the TFC and the TVC, and as the TFC doesn’t change, the TC
behaves just like the TVC. Figure 4.2 below shows the TC, TFC, and TVC curves a firm.
139
TC
Cost
TVC
TFC
O Output (X)
Figure 4.2: The TC, TVC and TFC Curves
From the total fixed cost, the total variable cost and the total cost curves, we obtain the
average fixed cost, the average variable cost and the average (total) cost curves
respectively.
Average Fixed Cost (AFC): is the total fixed cost divided by the amount of output, i.e.,
TFC
AFC = .
X
TFC
Since TFC is constant, an increase in X reduces the ratio , and thus the AFC
X
approaches the quantity (output) axis as output rises. This is depicted in Figure 4.3 below.
Cost
AFC
O
X
Figure 4.3: The Average Fixed Cost (AFC) Curve
140
Average Variable Cost (AVC): is the total variable cost divided by the level of output,
TVC
i.e., AVC = .
X
Graphically, the AVC at a given level of output is equal to the slope of a line drawn from
the origin to the point on the TVC curve corresponding to the particular level of output.
For example, in Figure 4.4 below, the AVC at X1 is the slope of the ray OA; and
similarly, the AVC at X2 is the slope of the ray OB; and so on. It is clear from the figure
that the slope of a ray through the origin declines continuously until the ray becomes
tangent to the TVC curve at point C. To the right of this point the slope of ray through the
origin starts increasing. Thus, the AVC curve falls initially as the productivity of the
variable factor increases, reaches a minimum when the plant is operated optimally and
rises beyond that point.
TVC
Cost
($)
C
B
A
O X1 X2 X3 X4 X
Cost AVC
($)
B D
O X1 X2 X3 X4 X
Figure 4.4: Deriving the AVC Curve from the TVC Curve
141
The graphical derivation of the ATC curve is done in the same way as the derivation of
the AVC curve. That is, the ATC at any one level of output is the slope of a line from the
origin to the point on the TC curve corresponding to the level of output. Like the AVC
curve, the average (total) cost (AC or ATC) curve is also U-shaped, reflecting the law of
variable proportions.
Marginal Cost (MC): is the additional/extra cost incurred in order to produce one more
unit of output. That is,
d (TC )
MC =
d(X )
It is straight forward to prove that marginal cost could be defined as the change in the
d (TVC )
total variable cost for a unit increase in output, i.e., MC = .
d(X )
Proof:
d (TC )
MC = (As defined earlier)
d(X )
d (TFC + TVC )
MC =
d(X )
d (TFC ) d (TVC )
= +
d(X ) d(X )
d (TVC )
= 0+ (Since there is no change in fixed cost)
d(X )
d (TVC )
MC = .
d(X )
Graphically, the marginal cost at a given level of production is the slope of the TC curve
(which of course is the same at any point as the slope of the TVC). The slope of the TC
curve at any one point is the slope of a tangent line at that point. As we can see from the
following graph (Figure 4.5), the tangent line initially becomes flatter and flatter as
142
output expands up to X3 level of output, and then becomes steeper and steeper as the
output goes on increasing. This means that the slope of the TC (or TVC) curve (MC)
initially decreases, reaches a minimum, and then starts increasing. Thus, the MC curve is
also U-shaped.
Cost
($) TVC
c
b
O X1 X2 X3 X4 X
Cost MC
($)
a
d
b
c
O X1 X2 X3 X4 X
Figure 4.5: Deriving the MC Curve from the TVC Curve
In summary, the traditional theory of cost postulates that in the short run the average and
marginal cost (AVC, ATC and MC) curves are U-shaped, reflecting the law of variable
proportions. In the short run with a fixed plant there is a phase of increasing productivity
(falling unit costs) and a phase of decreasing productivity (increasing unit costs) of the
variable factor. Between these two phases of plant operation, there is a single point at
143
which unit costs are at a minimum. In general, these short run cost curves are as shown
in Figure 4.6 below.
Cost
($) AC
MC
AVC
a
AFC
O XM XV XT X
Figure 4.6 above also shows various relationships between the following pairs: AVC and
ATC; ATC and MC; and AVC and MC. These relationships are discussed below.
The AVC is a part of the ATC: ATC = AFC + AVC. Both AVC and ATC are U-shaped,
reflecting the law of variable proportions. However, the minimum point of the ATC
occurs to the right of the minimum point of the AVC. This is due to the fact that ATC
includes AFC which falls continuously with increase in output. Initially, the fall in the
AFC offsets the rise in the AVC and thus the ATC declines. But later on, the rise in the
AVC more than offsets the fall in the AFC and thus the ATC will start rising. The AVC
approaches the ATC asymptotically as X increases since the AFC, which is the difference
between the two, declines continuously.
144
(B) The Relationship between MC and ATC
The MC cuts the ATC at its minimum point. We said that MC is the change in TC for
producing an extra unit of output. To illustrate the relationship, assume that we start from
a level of Xn units of output.
If we increase the output by one unit the MC is the change in TC resulting from the
production of the (Xn+1)th unit. That is, MC = TCn+1 – TCn.
The AC at each level of output is found by dividing TC by X. Thus, the ATC at the level
of Xn is:
TC n
ATC n =
Xn
And at the level of Xn+1:
TC n +1
ATC n +1 = .
X n +1
Clearly, from the first relationship above, TCn+1 = TCn + MC.
Thus, if the MC of the (Xn+1)th unit is less than the ATCn (the ATC of the previous Xn
units), the ATCn+1 will be smaller than the ATCn. On the other hand, if the MC of the
(Xn+1)th unit is higher than the ATCn (the ATC of the previous Xn units), the ATCn+1 will
be higher than the ATCn.
In general, as far as the MC is below the ATC (i.e., MC < ATC), it pulls the ATC
downward; and, whenever the MC is above the ATC (i.e., MC > ATC), it pulls the latter
upward. From this, it follows that the MC curve intersects the ATC at the minimum point
of the ATC.
This relationship between the ATC and the MC can also be proofed by using a simple
calculus:
TC
¾ From ATC = ⇒ TC = ( ATC ) • X , and
X
145
d (TC )
¾ MC = by definition.
d(X )
d (TC )
⇒ MC =
d(X )
d ( ATC • X )
=
d(X )
d(X ) d ( ATC )
= ATC • +X•
d(X ) d(X )
MC = ATC + X • (Slope of the ATC)
Given that X and ATC are positive, the last line above shows that:
¾ MC < ATC if the slope of ATC is negative.
¾ MC = ATC if slope of ATC = 0, (at the minimum of the ATC).
¾ MC > ATC if slope of ATC > 0.
The relationship between MC and AVC is similar to the relationship between MC and
ATC seen above; the MC curve intersects the AVC curve at the minimum point of the
latter one.
TVC
¾ From AVC = ⇒ TVC = ( AVC ) • X , and
X
d (TC ) d (TFC + TVC ) d (TVC )
¾ MC = = = because there is no change in TFC.
d(X ) d(X ) d(X )
d (TVC )
⇒ MC =
d(X )
d ( AVC • X )
=
d(X )
d(X ) d ( AVC )
= AVC • +X•
d(X ) d(X )
MC = AVC + X • (Slope of the AVC)
146
Given that X and AVC are positive, the last line above shows that:
¾ MC < AVC if the slope of AVC is negative.
¾ MC = AVC if slope of AVC = 0, (at the minimum of the AVC).
¾ MC > AVC if slope of AVC > 0.
In short, assuming that there is only one variable factor of production, the average
variable cost is the mirror image of the average product; and similarly, the marginal cost
is the mirror image of the marginal product.
That is, if labor is the only variable factor of production, the following relationships hold:
# when the average product of labor (APL) rises, the average variable cost of
production (AVC) falls;
# when the average product of labor (APL) falls, the average variable cost of
production (AVC) rises;
# when the average product of labor (APL) is at its maximum, the average variable
cost of production (AVC) is at its minimum;
# when the marginal product of labor (MPL) rises, the marginal cost of production
(MC) falls;
# when the marginal product of labor (MPL) falls, the marginal cost of production
(MC) rises; and
# when the marginal product of labor (MPL) is at its maximum, the marginal cost of
production (MC) is at its minimum.
The mathematical proofs of the above inverse relationships between average product and
marginal product of labor on the one hand and the average variable cost and marginal
cost on the other hand are as follows.
147
Given TVC = w.L, where w = the market wage rate (assumed fixed) and L = the quantity
of labor input.
TVC w.L
1. AVC = = , where Q is the level of output
Q Q
L
⇒ AVC = w.
Q
1
= w.
APL
w
⇒ AVC =
APL
∂ (TC ) ∂ (TVC )
2. MC = = ,
∂Q ∂Q
∂ ( w.L) ∂L
⇒ MC = = w. because w is a constant (fixed).
∂Q ∂Q
1
= w.
MPL
w
⇒ MC =
MPL
148
APL
MPL
A
B
APL
O L1 L2 L
MPL
AVC
MC MC
AVC
B’
A’
O Q1 Q2 Q
Figure 4.7: The Inverse Relationships between Product Curves and Cost Curves
Activity 13
149
b. MC and ATC
c. MC and MPL
d. AVC and APL
4. 3 LONG-RUN COSTS
The long-run is a period of time of such length that all inputs are variable. It is a planning
horizon in the sense that economic agents can plan ahead and choose many aspects of the
“short-run” in which they will operate in the future. Thus, the long-run consists of all
possible short-run situations among which an economic agent may choose.
LTC LTC
LMC
LMC = LAC
O Q O Q
Figure 4.8: The Long-Run Total, Average and Marginal Cost Curves under CRS
If we consider the case where total cost first increases at a deceasing rate due to
increasing returns to scale (which implies economies of scale), and then increases at an
increasing rate attributed to decreasing returns to scale after the optimum size, the long-
150
run total cost curve will look like the following. Consequently, the LAC and LMC curves
will be U-shaped.
LTC LAC
LTC LMC LMC
LAC
O Q O Q
Figure 4.9: The Long-Run Total, Average and Marginal Cost Curves
The range to the left of the minimum point of the LAC curve is called the range of
economies of scale, which means output can be doubled for less than doubling of cost.
The range to the right of the minimum point of the LAC curve is called the range of
diseconomies of scale, because a doubling of output requires more than a doubling of
cost.
The traditional theory of the firm assumes that economies of scale exist only up to a
certain plant size, which is known as the optimum plant size. With this plant size all
possible economies of scale are fully exploited. If the firm expands production further
than this optimum size, there are diseconomies of scale arising from managerial
inefficiencies. It is argued that management becomes highly complex, managers are
overworked and the decision making process becomes less efficient.
When a firm is producing an output level along the falling part of the LAC curve, the
LMC is less than the LAC. Conversely, when the LAC curve is rising, the LMC is greater
151
than the LAC. The two curves intersect at the point where the LAC curve achieves its
minimum.
Like the short run average cost (SAC) and short run marginal cost (SMC) curves, the
LAC and the LMC curves are also U-shaped. But the reason behind the U-shape of the
long run curves is different from the reason behind the U-shape of the short run curves. In
the long-run, the source of the U-shape is increasing and decreasing returns to scale,
rather than diminishing returns to a factor of production which is the source of the U-
shape fro the short run.
Assume that a firm is uncertain about the future demand for its product and is considering
three alternatives plant sizes: Small, Medium and Large. The short-run average cost
curves are SAC1, SAC2 and SAC3 as shown in the figure below.
Cost
SAC1
($)
AC1 SAC2 SAC3
AC2
AC1*
AC2*
O Q1 Q1* Q2 Q2* Q
Figure 4.10: Short Run Average Cost Curves and the Long Run Average Cost
152
If the firm expects that the demand will expand further than Q1, it will install the medium
plant, because with this plant outputs larger than Q1 are produced with a lower cost. For
instance, the average cost of producing Q1* units with the medium plant (AC1*) is less
than the average cost of producing the same units with the small plant (AC1).
Similar considerations apply for the decision of the firm once the level production passes
Q2. For instance, the average cost of producing Q2* units with the large plant (AC2*) is
less than the average cost of producing the same units with the medium plant (AC2).
Thus, the firm follows the path which is drawn in bold in the figure above. This bold
envelope is thus the long run average cost curve for the case of three plant sizes assumed.
If we relax the assumption of the existence of only three plant sizes and assume that there
is a very large (an infinite) number of plant sizes, we obtain a continuous curve, which is
the planning LAC curve of the firm.
Cost
($)
SAC7
LAC
SAC1 SAC6
SAC2
SAC5
SAC4
SAC3
O Q* Q
Figure 4.11: The LAC Curve as an Envelope of Various SAC Curves
The LAC curve is the locus of points denoting the least cost ways of producing various
levels of output. It is a planning curve because the firm decides what plant size to set up
in order to produce optimally the expected level of output at minimum cost on the basis
153
of this curve. The LAC curve is U-shaped and it is often called the envelop curve because
it envelopes the short run curves.
Because there are economies of scale and diseconomies of scale in the long-run, the
minimum points of the short run average cost curves (plants 1 up to 3, and 5 up to 7 in
the figure above) do not lie on the long-run average cost curve. For example, a plant size
of 2 operating at its minimum average cost is not efficient because a larger plant can take
advantage of increasing returns to scale to produce the same level of output at a lower
average cost.
Each point of the LAC curve is a point of tangency with some corresponding SAC curve.
The point of tangency occurs on the falling part of the SAC curves for points lying to the
left of M, i.e., for the plant sizes such as 1, 2 and 3. Since the slope of the LAC is
negative up to M, the slope of these SAC curves must also be negative, because at the
point of tangency the two curves have the same slope.
By the same logic, the points of tangency of the LAC curve and the SAC curves for
outputs larger than Q* (to the right of M) occur on the rising part of the SAC curves.
Only at the minimum point (M) of the LAC is the corresponding SAC also at a minimum.
At the falling part of the LAC curve the plants are not worked to full capacity. To the
rising part of the LAC curve the plants are overworked. Only at the minimum point M is
the plant optimally utilized.
The LMC is derived from the SMC curves but does not envelop them. The LMC is
formed from points of intersections of the SMC curves with vertical lines drawn from the
points of tangency of the corresponding SAC and the LAC curve. Figure 4.12 below
illustrates how this is done.
154
SMC3 LMC
Cost
($)
LAC
SMC1
SAC1 SAC3
a
SAC2 SMC2
O Q
To the left of a, SAC1 is greater than LAC so that SAC1 declines at a faster rate than the
LAC. As the larger (SAC1) is falling at a faster speed than the smaller (LAC), the two
will be equalized at some point – at point a in the figure above. This implies the LMC is
greater than SMC1 to the left of a. At a, LMC = SMC1 (the same amount of additional
costs accrue to both the short-run and the long-run costs so that SAC1 = LAC). To the
right of a, LMC < SMC1 (more incremental cost is added to the short-run cost than to the
log-run cost). At the minimum point of the LAC, the LMC intersects the LAC. At this
point, SAC = SMC = LAC = LMC.
Activity 14
1. Are the short run and the long run cost curves similar in shape? If so, do you see any
difference between the two?
2. The long run average cost curve is an envelope curve. What does this mean?
Explain.
3. Why don’t we have a long run average fixed cost?
155
4.5 DERIVATION OF COST FUNCTION FROM PRODUCTION
FUNCTION
Cost functions are derived functions in that they are derived from the production
function. Costs are not incurred for their own sake but only to produce output.
Graphically, the total cost curve is determined by the locus of points of tangency of
successive isocost lines with the corresponding highest isoquants.
Mathematically, the cost function can be derived as follows. As usual, we use the Cobb-
Douglas production function: X = ALb K c
Given this production function and the cost function C = wL + rK , we want to derive the
cost function, that is, cost as function of output: C = f(X).
156
∂Z
* = wL + rK − C = 0
∂λ
Ö wL + rK = C ……………………………………………………………… (3)
MPL MPK w MPL
From equations (1) and (2) we understand that: = or =
w r r MPK
Using the Cob-Douglas production function given above,
bALb K c b
MPL = bALb−1K c = = X
L L
cALb K c c
and similarly, MPL = cALb K c−1 = = X
K K
Using the equilibrium condition and these marginal products, solve for K in terms of L,
or for L in terms of K. Let us solve for L in terms of K.
b
X
w L
=
r c
X
K
w bK
⇒ =
r cL
⇒ wcL = rbK
rbK
⇒L= .................................................................................................................(4)
wc
Substitute this term for L into the production function and solve for K in terms of X:
rbK b c
X = A( ) K
wc
rb
⇒ X = A( ) b K b + c
wc
X wc b
⇒ ( ) = K b+c
A rb
1
X wc
⇒ [ ( ) b ] b + c = K .......... .......... .......... .......... .......... .......... .......... .......... ....(*)
A rb
rbK
From equation (4) above, we know that L = .
wc
157
1
rbK rb X wc b b+ c
Then, L = = [ ( ) ]
wc wc A rb
c 1
rb b+c X b+c
⇒L=( ) [ ] ..............................................................................(**)
wc A
As a final step, substitute (*) and (**) into the isocost equation: C = wL + rK
c 1 1
rb X X wc
C = {w( ) b+c [ ] b+c } + {r[ ( ) b ] b+c }
wc A A rb
b c c −1 1 1−b −b b −1 1
b b
⇒ C = [ w b + c r b+ c ( ) b +c A b +c X b +c ] + [ r b+ c ( ) b +c w b+c A b + c X b +c ]
c c
b c c −1 1−b −b b −1 1
b b
⇒ C = {[ w b+c r b+c ( ) b+c A b+c ] + [r b+c ( ) b+c w b+c A b+c ]}X b+c
c c
1 b c c −1 1−b −b b −1
+ b b
⇒ C = {v}X c ; where v = [ w b+c r b+c ( ) b+c A b+c ] + [r b+c ( ) b+c w b+c A b+c which is a constant
b
c c
Don’t worry if you find the above derivation cumbersome. A numerical example makes it
2 1
easier. Suppose we have a production function given by X = L K , w = 2 Birr per unit 3 3
Solution:
The steps that are involved to derive the cost function are:
Step 1: Solve for L in terms of K or K in terms of L from the optimality
−1 1
2 3 3
L K
w MPL 2 3
condition = .⇒ =
r MPK 4 1 23 −32
LK
3
−1 1
1 2L 3 K 3
⇒ = 2 −2
2
L3 K 3
1 2
+
1 K3 3
⇒ = 2 1
4 +
L3 3
158
1 K
⇒ =
4 L
⇒ L = 4K
Step 2: Substitute the result from step 1 into the production function and solve for L and
K in terms of Q from the production function.
2 1
X =L K 3 3
2 1
⇒ X = (4 K ) K 3 3
2 2 1
+
⇒X =4 K 3 3 3
⇒ X = 3 16 K
X
⇒K=3
16
X
⇒ L = 4K = 4 3
16
−2
Because L = 4K, ⇒ L = 414 3 X
⇒ L = 3 4X
Step 3: Substitute the results from step 2 into the cost constraint.
C = wL + rK
⇒ C = 2L + 4K
1
⇒ C = 2(3 4 ) X + 4( 3 )X
16
1
⇒ C = [2(3 4 ) + 4( 3 )] X
16
5 2
⇒ C = [2 3 + 2 3 ] X .
A large firm may have a lower long run average cost than a smaller firm because of
increasing returns to scale in production, which implies that growing firms with
increasing returns to scale enjoy lower average costs over time.
159
But this may not be necessarily the case. In some firms, long-run average cost may
decline overtime because workers and managers absorb new technological information as
they become more experienced at their jobs. As management and labor gain experience
with production, the firm’s marginal cost (MC) and average cost (AC) of producing a
given level of output fall for four reasons:
1. As workers become more adapted to a given task, their speed increases.
2. Managers learn to schedule the production process more effectively.
3. Engineers who are initially cautious in their product designs may gain enough
experience to be able to allow for tolerances in design that save cost without
increasing defects. Better and more specialized tools and plant organization may
also lower cost.
4. Suppliers of materials may learn how to process materials required more effectively
and may pass on some of this advantage in the form of lower materials cost.
Learning Curve
Cumulative output
Figure 4.13: The Learning Curve
160
Overtime, a firm’s average cost of production can decline because of:
a. Growth of sales when increasing returns are present (movement from A to B in
the figure below), or
b. The existence of learning curve/effect (movement from A to C in the figure).
AC
B
AC1
C
AC2
O Q
Figure 4.14: Economies of Scale versus Learning Effect
Activity 15
1. Outline the steps to be followed for deriving the cost function from the production
function.
2. Discuss the reasons for which a firm that has been in business for long could
experience low average unit cost of production.
3. What is the difference between economies of scale and learning effect?
161
UNIT SUMMARY
# The cost function is a derived function – derived from the production function.
# In both the short and the long run, economists calculate implicit as well as explicit
costs of production. Implicit costs are those costs implied by the alternatives given
up, and explicit costs are direct expenditure or bookkeeping costs.
# In the short run, as more and more units of the variable factor(s) are added to the
fixed factor, the firm may initially experience increasing returns to the variable
factor and thus total costs of production rise slowly at lower levels of output.
However, eventually the firm reaches a point (some higher level of output) at
which total costs begin to increase at an increasing rate. Such increasing and
diminishing returns to the variable factor of production (the law of variable
proportions) account for the U- shape of the short-run average and marginal cost
curves.
# Except that we don’t have a fixed cost in the long run, the short and the long run
cost follow similar patterns. However, the U-shape of the long-run average and
marginal cost curves is due to economies and diseconomies of large-scale
production.
# There a predictable relationship between short run cost functions and production
functions as well between short run and long run cost functions.
# A large firm may have a lower long run average cost than a smaller firm because of
two reasons: because of increasing returns to scale (economies of scale) in
production, and/or because of the learning effects (as workers and managers of a
large firm could easily absorb new technological information as they become more
experienced at their jobs).
162
SELF-TEST QUESTIONS
1. If we have a linear cost function of the firm C = a + bQ, then the average cost will:
a. remain constant as production expands.
b. decrease continuously as production expands.
c. increase with increases in output
d. first increase and then decrease with increases in output.
2. When the marginal cost increases beyond its minimum, the average cost,
a. increases
b. decreases
c. remains constant
d. first decreases and then increases
3. Which of the following is the general sequence?
a. Economies of scale begin when diseconomies end
b. Diseconomies begin where economies end.
c. Diseconomies end where economies begin
d. Economies and diseconomies of scale go together
4. The cost that a firm incurs in purchasing or hiring any factor of production from
outside the firm is referred to as:
a. explicit cost
b. implicit cost
c. variable cost
d. fixed cost
5. An entrepreneur running a business earns $20,000 per year as his/her salary from the
total receipts of the firm; the implicit cost of this entrepreneur is:
a. $20,000/year
b. more than $20,000/year
c. less than $20,000/year
d. any of the above is possible
163
6. If only part of the labor force employed by a firm can be dismissed at any time and
without pay, the total wages and salaries paid out by the firm must be considered:
a. a fixed cost
b. variable cost
c. partly fixed and partly variable cost
d. any of the above
7. When the law of diminishing returns begins to operate, the TVC begins to:
a. fall at an increasing rate
b. rise at a decreasing rate
c. fall at a decreasing rate
d. rise at an increasing rate
8. All the following curves are “U” shaped except:
a. the AVC curve
b. the AFC curve
c. the ATC curve
d. the MC curve
9. MC is given by:
a. the slope of the TFC curve
b. the slope of the TVC curve, but not by the slope of the TC curve
c. the slope of the TC curve, but not by the slope of the TVC curve
d. either by the slope of the TC curve or by the slope of the TVC curve
10. The MC curve reaches its minimum point before the AVC and the ATC curves do so.
In addition, the MC curve intersects both the AVC and the AC curves at their lowest
points. The above statements are both true:
a. always
b. never
c. often
d. sometimes
11. At the point where a straight line from the origin is tangent to the TC curve, the ATC
is:
a. at its minimum
164
b. equal to MC
c. equal to AVC plus AFC
d. all of the above
12. The LAC curve is tangent to the SAC curve at the lowest point of the latter when the
LAC curve is falling. This statement is true:
a. always
b. never
c. sometimes
d. cannot say
13. If the LAC curve falls as output expands, this is due to:
a. economics of scale
b. the law of diminishing returns
c. diseconomies of scale
d. any of the above
14. The LAC curve:
a. falls only when the LMC curve falls
b. rises whenever the LMC curve rises
c. goes through the lowest point of the LMC curve
d. falls when LMC < LAC and rises when LMC > LAC
15. The short run total cost can never be less than the long run total cost. This statement
is:
a. always true
b. often true
c. sometimes true
d. never true
1. Distinguish between: (a) short-run and long-run costs, (b) explicit and implicit costs.
2. Explain the relationship between the marginal and average cost curves. Show the
relationship between marginal cost, average variable cost and average total cost.
165
3. Explain why the average total cost and the average variable cost become closer and
closer as output increases.
4. Show the circumstances when the marginal cost is constant throughout but the
average cost is falling. (Hint: think of the geometric derivations of the two costs.)
5. Derive the long run average cost curve from the short run average cost curves.
6. Write a short note on the derivation of long run marginal cost curve.
7. Why is it that at the output where SAC = LAC, SMC also equals LMC?
8. Suppose the cost function is given as C = 135 + 75Q – 15Q2 + Q3. Prepare a cost
schedule (table) showing the TFC, TVC, TC, AFC, AVC, MC, and ATC. Is this cost
function a short run or a long run cost function? Why? Draw the cost curves on the
basis of cost data obtained from the cost function.
166
UNIT FIVE
PERFECT COMPETITION
UNIT INTRODUCTION
Now, we are ready to bring together the demand and supply sides of the market. The
market in which an individual firm operates or sells its product (good or service) to
consumers can be categorized broadly into perfect and imperfect markets. Markets
dominated by one firm (monopoly), very few firms (oligopoly), and relatively large
numbers of firms selling closely substitutable products (monopolistic competition) are the
three common types of imperfect markets. In such markets, firms use different means of
deterring other firms from entering into the market or the means of influencing their
market share. The later two types of imperfect markets are characterized by rivalry
among individual firms.
The type (or nature) of competition firms face from competitors, which in turn
determines the degree of power of a firm over the price of its product, is the basis for
categorizing markets into perfect and imperfect. While price competition is the only type
of competition firms operating in perfectly competitive markets will face from
competitors, both price and non-price competitions are common in imperfect markets. In
short, perfect competition is a market structure characterized by complete absence of
rivalry among individual firms.
167
sells. Because the conditions for perfect competition are very strict, there are few
perfectly competitive markets in the real world.
UNIT OBJECTIVES
There are many consumers with the willingness and ability to buy the product at a certain
price and many producers with the willingness and ability to supply the product at a
certain price. Since each firm supplies only small part of the total market supply any firm
cannot affect the market price by altering (increasing or decreasing) its output.
2. Homogeneous Products
168
The assumption of large number of sellers and product homogeneity together imply that
an individual firm operating in a perfectly competitive market is a price taker. Thus, a
competitive firm faces a completely horizontal or perfectly elastic demand curve for its
product indicating that it can sell any amount of output only at the ongoing market price
( P ). Moreover, the demand curve is also the average revenue (AR) and marginal
revenue (MR) curve.
P P = DD = AR = MR
O Q
Figure 5.1: The Demand Curve Faced by a Firm under Perfectly Competitive Market
The reason for the equality of the ongoing market price ( P ) and the demand curve is that
any firm receives, for any unit of output sells, the price which is determined by the
intersection of market demand and market supply. This is depicted in Figure 5.2 below.
SS
P MC
− − −
P EM P EF P = DD = MC
DD
QM Q QF Q
(a) Industry/Market (b) Firm
169
Why do the relationships P = AR and P = MR hold? Let us show these mathematically.
TR P .Q dTR d (Q.P ) dQ
AR = = MR = = = P( )
Q Q dQ dQ dQ
⇒ AR = P ⇒ MR = P
3. Free Entry/Exit
Unlike imperfect markets, entry into and exit from a business is not blocked in a perfectly
competitive market. In other words, firms have freedom of movement or there is no
barrier that restricts firms from entry into and/or exit out of a perfectly competitive
market.
The objective of firms in perfect competition is profit maximization. To this end firms
operate (produce and sell) at a point where the marginal cost of production meets the
marginal revenue from sales. More on this will be discussed in Section 5.2.
This is to say there is no government regulation or intervention in the market in any way,
say through imposing tariffs, granting subsidies, rationing, etc., which are considered as
disturbances to the market. This notion is based on the argument of the classical
economists led by Adam Smith who regard the government intervention as unnecessary.
A market that fulfils only the above five characteristics is called pure competition. Pure
competition and perfect competition are different for the later requires the fulfillment of
the following additional characteristics/assumptions.
170
6. Perfect Mobility of Factors of Production
This implies that all factors of production, such as labor and raw materials, are free to
move from one sector to another or from one firm to another. That is, workers can change
their jobs without any restriction for labor is not unionized and the supply of raw
materials is not monopolized either by one or few firms. This also implies full
employment of resources.
It is assumed that in a perfectively competitive market both sellers and buyers have
complete information and knowledge of the market. The implication is that the current
and future price of products, quality of products supplied by different firms, etc., are
certainly known. In other words, information is costless: there is no uncertainty about
future prices, and no non-price competition exists under a perfectly competitive market.
Activity 16
We will see the equilibrium of a perfectly competitive firm as well as that of industry
under three different cases: the market period, the short run and the long run equilibria.
A market period refers to a very short period in which supply is absolutely fixed. For
instance, the quantity of agricultural products available in the market cannot be increased
171
instantly with demand as production is seasonal. Put it differently, though different levels
of demand give rise to different prices, supply will remain the same for it cannot be
increased until the next harvest.
P S
P3
P2
P1
D3
D2
D1
O QS Q
From the above figure it is clear that different level of demand gives different equilibrium
but equilibrium output remains the same. This implies that, at any market period demand
alone determines the equilibrium price. A market period is thus different from short run
and long run in which both the supply and demand conditions determine the equilibrium
price and quantity.
Shot run is a production period in which the amount of one or more of the inputs a firm
uses is fixed or constant. In other words, in the short run, the quantity of output produced
by a competitive firm can be increased (decreased) only by increasing (decreasing) the
variable inputs. The short run equilibrium of a firm or an industry (a market) is thus the
output level that maximizes profit or minimizes loss under such conditions. This profit-
172
maximizing level of output and the profit level can be determined using any of the two
approaches discussed below.
Using this approach, a firm is in equilibrium when total revenue less total cost is the
maximum. That is, the firm maximizes profit when the difference between total revenue
and total cost is the greatest. The following hypothetical example for a competitive firm
clarifies how we determine the equilibrium output and maximum profit using the TR –
TC approach.
Example 1: Suppose the short run market price is $5. Moreover, the short run output (Q)
and associated total cost of a competitive firm as are shown in the table below.
Q 0 1 2 3 4 5 6 7 8 9 10 11 12
TC 4 15 17 18.5 19.5 20 22.25 24.75 27.48 32.48 38.88 46.66 55 65.28
Given the above information, we need to compute only TR (i.e., price multiplied by the
level of output, Q) in order to determine the equilibrium output and maximum profit
using the TR – TC approach. The profit/loss of the firm for each output level is computed
by subtracting TC from TR and is shown in the last column of Table 5.1. Other variables
are computed for latter use.
4
Recall from unit Four that the total cost when output is equal to zero is the short run total fixed cost
173
Table 5.1: Determination of Equilibrium of a Firm Using the TR – TC Approach
MC (∆TC/∆Q)
TC (FC+VC)
M (∆TR/∆Q)
ATC (TC/Q)
Output (Q)
AR (TR/Q)
Profit/Loss
(TR –TC)
TR (P.Q)
Price (P)
TVC
TFC
$5 0 0 - - 15 - 15.00 - - (15.00)
$5 1 5 5 5 15 2.00 17.00 17.00 2.00 (12.00)
$5 2 10 5 5 15 3.50 18.50 9.25 1.50 (8.50)
$5 3 15 5 5 15 4.50 19.50 6.50 1.00 (4.50)
$5 4 20 5 5 15 5.00 20.00 5.00 0.50 0
$5 5 25 5 5 15 7.25 22.25 4.45 2.25 2.75
$5 6 30 5 5 15 9.75 24.75 4.13 2.50 5.25
$5 7 35 5 5 15 12.48 27.48 3.93 2.73 7.52
$5 8 40 5 5 15 17.48 32.48 4.06 5.00 7.52
$5 9 45 5 5 15 23.88 38.88 4.32 6.40 6.12
$5 10 50 5 5 15 31.66 46.66 4.67 7.78 3.34
$5 11 55 5 5 15 40.00 55.00 5.00 8.34 0
$5 12 60 5 5 15 49.20 64.20 5.35 9.20 (4.20)
$5 13 65 5 5 15 59.36 74.36 5.72 10.20 (9.36)
Note: The values of ATC (SAC) are rounded to two decimal places.
From Table 5.1 it is clear that the firm obtains normal (zero) profit or is at its break even
point when it produces 4 or 11 units of output. Moreover, the firm obtains maximum
profit when it produces either 7 or 8 units of output.
The most important points in the total revenue – total cost approach are depicted
graphically as follows.
174
TC
TR
B
55.00
T
40.00
O 4 7 8 11 Q
Figure 5.4: Profit Maximization of a Firm Depicted Using the TR – TC Approach
The profit (loss) of a firm is represented by the positive (negative) distance between the
total revenue (TR) and total cost (TC) curves. In the above figure, first the TC curve lies
above the TR curve until exactly 4 units of output is produced at point A implying that
profit is negative (there was loss) prior to this point. Secondly, the intersection of the total
revenue and total cost curves at point A implies that the firm has reached its breakeven
point (no loss and no gain or obtains zero profit). Thirdly, the firm achieves economic
(positive) profit at any level of production between point A and B. In this region, profit
increases gradually, reaches maximum towards the middle, and declines gradually after 8
units of output is produced. Once again, the firm breaks even at point B when it produces
exactly 11 units of output. Finally, profit becomes negative beyond point B.
Therefore, profit maximizing level of output is achieved at a point where the positive
distance between the total revenue and total cost curves is the longest. At this point, the
slope of the total cost, the MC (see the TT line which is tangent to the TC curve) is equal
to the slope of the total revenue curve, the MR. In other words, the short run equilibrium
of the firm is achieved when 8 units if output is produced.
175
2. The Marginal Approach
The total revenue – total cost approach indicates only the amount of profit (or loss) at
different levels of production. In the above example, for instance, both 7 and 8 units of
output generate 7.52 units of profit and the TR – TC approach doesn’t tell us why we
choose 8 as a profit maximizing level of output (and why not 7). Hence, it does not help
for analytical interpretation of business behavior. In this regard, the marginal approach is
a useful analytical tool at least for the following reasons.
The first reason is that the short run equilibrium output (profit maximizing level of
output) and the associated profit can be clearly determined by equating marginal revenue
to marginal cost, i.e., MR = MC .
Graphically:
MR MC
MC ATC
ATC
5.00
Profit P = MR
4.06
0.50
4 EQ = 8 Q
Figure 5.5: Short Run Equilibrium of a Firm Depicted Using the Marginal Approach
176
Thus, if P > ATC , there is excess profit; if P = ATC the firm gets normal (zero) profit;
and, if P < ATC the firm incurs loss. For instance, at the equilibrium output (EQ) profit is,
π = (5 − 4.06)8 , which is
π = (0.94)8 = 7.52 .
The second reason is that comparing the value of MR and MC to the left and right of
short run equilibrium output (EQ) has an important implication for a firm’s decision on
whether to expand or reduce output. For example, to the left of EQ (for any output level
less than 8), the MR ( = P) exceeds the MC, indicating that the sale of a unit of output
would increase total revenue more than total cost since price is greater than unit cost
(ATC) of production. Therefore, it pays for the firm to expand production. On the other
hand, MR is lower than MC to the right of the equilibrium output implying that the firm
should reduce its production.
Alternatively, the short run equilibrium of a firm can also be derived mathematically
from the given level of market price and total cost function of a firm.
Example 2:
Suppose the market (per unit) price a firm faces is $10 and its cost function is given by:
TC = Q 2 + 1 . Calculate the profit maximizing level of output and the maximum profit.
In this case,
dTC TC Q 2 + 1
MC = = 2Q and ATC = = .
dQ Q Q
Equating the market price to the MC will give the equilibrium output. That is,
P = MC
10 = 2Q .
Thus, the output level that maximizes profit is: Q = 5 .
Substituting this output level into the TC and ATC equations gives the values 26 and 5.2,
respectively.
177
Furthermore, the profit of the firm obtains is:
π = TR − TC
π = PQ − (Q 2 + 1) = PQ − Q 2 − 1
⇒ π = 10(5) − (52 + 1) = 50 − 26 = 24 .
The same result can also be obtained using: π = ( P − ATC )Q .
π = (10 − 5.2)5 = (4.8)5 = 24 .
Activity 17
1. A perfectly competitive firm is faced with the following output and total cost
schedule.
Q 0 1 2 3 4 5 6 7 8 9 10
TC 9 20 30 32 39 47 60 67 77 90 109
If the market price is Birr 13,
a. Compute a table that shows the short run equilibrium of the firm using the TR –
TC and marginal approaches.
b. What is the equilibrium output of the firm?
c. Using the marginal approach, show the profit level graphically.
2. Assume a two product firm is operating in a perfectly competitive market. The market
prices of its products are $12 and $18, respectively. Furthermore, the production cost
of the firm is given by TC = 2Q12 + Q1Q2 + 2Q22 . Based on this information:
a. Find the short run equilibrium outputs, Q1 and Q2 , that in combination maximize
profit.
b. Calculate the total profit of the firm.
c. Show graphically the profit the firm earns from each market separately.
So far we have seen two reasons for the usefulness of the marginal approach. Thirdly,
this approach will provide the basis weather to shutdown a loss making firm or not. This
can be illustrated with the help of the figure below.
178
P
MC ATC
AVC
P1 E1 MR1
D A
F
B C
H E2
P2 MR2
E3 MR3
P3
G K
P4 MR4
E4
E5
P5 MR5
O q5 q4 q3 q2 q1 Q
Figure 5.6: Short Run Equilibria of a Firm for Different Market Prices
In the above figure, five short run equilibrium points are established at different market
prices. The equilibria are established at points where P = MR = MC . As a result, the
quantity of output produced by a firm as well as its profit or loss varies. For example,
when the ongoing market price is P1 , the short run equilibrium is at point E1 . At this
price, the total amount of output produced by a firm operating in a perfectly competitive
market is Oq1 . On the other hand, the unit cost (ATC) of producing one unit of output is
given by the distance OF or q1C .Since P1 > ATC (q1C ) , the area P1 E1CF indicates the
excess profit the firm obtains.
Suppose the market price declines from P1 to P2 . In this case, the short run equilibrium
is established at point E 2 and Oq 2 amount of output is supplied. Since, price OP2 is
equal to unit cost q 2 E 2 , the firm is in its breakeven point; that is it earns normal (zero)
profit. However, for any price level below P2 , the firm will incur loss or will earn
negative profit as the market price will be less than ATC.
179
An interesting question one might ask is that, should a loss making firm close down? The
answer to this question is that one should observe whether the market price is greater than
or equal to the AVC at that equilibrium output in order to decide whether to close down
or not. That is, a loss making firm should stay in business by continuing production as far
as the market price is greater than the AVC. This is because not all fixed costs incurred
are lost if the market price is greater than AVC. In other words, since all fixed costs will
be lost if the firm discontinues production, the firm will lose less by staying in business
and covering some part of the fixed costs. However, a loss making firm should shut down
when the market price becomes less than the minimum of AVC. Recall from earlier
discussion in Unit Four that, graphically, AVC will be at its minimum when it is crossed
by the MC curve from below. Therefore, the point where thee minimum AVC is equal to
MC is called the shutdown point.
The reason as to why it is a sensible strategy for a loss making firm to stay in business
and shutdown when the market price is greater than and less than the AVC respectively
can be justified by considering the situations at market price P3 and P4 in Figure 5.6
above.
First, consider the situation when the market price declines from P2 to P3 . When the
ongoing market price is P3 , the short run equilibrium is established at E3 and hence the
firm produces Oq3 amount of output. At this level of production, the cost of producing
one unit of output (ATC) is given by OH or q 3 B . Since P3 < q3 B , or P3 < OH , the area
180
Therefore, if the firm decides not to produce Oq3 amount of output it will lose the whole
of TFC given by area KBHG . However, by deciding to stay in business it will lose only
P3 E3 BH , which is less than KBHG . This is because it has covered the part of the TFC
given by the area KE 3 P3G . Profit maximizing firms may in the short run continue to
operate even though they are losing money. This is the case particularly for firms that
own great deal of capital and therefore high fixed costs, because it is often less costly to
continue producing at a loss than to shutdown and still be forced to bear the high fixed
cost.
However, a loss making firm should shutdown as soon as the market price falls below
P4 . Because, when it produces Oq 4 amount of output at E 4 , the firm will lose all of its
TFC amounting to E 4 ADP4 ; and, as soon as the price falls short of P4 , it won’t even
cover its variable cost if it decides to produce. The market price ( P4 ) that is equal to the
minimum of the AVC ( q 4 E 4 ) and the MC is the dividing line between the decision to
shut down and to continue operation. When the market price is below P4 , the firm should
shut down since it will lose only its fixed cost by shutting down. If it were to produce at
the point where MC equals the very low market price, it would lose more than fixed cost.
Therefore, it is a wise decision to shutdown the business.
The short run industry supply curve is the horizontal summation of the short run supply
curves of individual firms. The short run supply curve of an individual firm is derived
from the intersection of its MC curve with its successive demand (MR) curves. It is part
of the MC curve above the intersection of the MC and the AVC curve. As the market
price increases gradually we expect that each higher demand curve (price line) cuts the
MC curve at a point to the right of the previous intersection. This indicates that quantity
supplied by firms will increase as price increases.
181
P
MC The Supply Curve of a Firm
ATC
AVC
P3
P2
P1
q1 q2 q3 Q q1 q2 q3 Q
Therefore, the industry supply curve is simply the horizontal summation of the individual
firms’ supply curves. Given the industry supply curve, the short run industry equilibrium
will be obtained after determining the industry demand curve which is downward
sloping. Assuming that there are 100 identical firms in the industry, the short run
equilibrium will be as shown in the figure below.
P3
100*q3 Q
182
5.2.3 The Long Run Equilibrium
Unlike the short run, the long run is a period of time in which a firm can vary/change the
amounts of all of its inputs. Since all inputs are variable in the long run, a firm has the
option of adjusting its output through adjusting its plant size to achieve maximum profit.
It is also possible some businesses can be liquidated /shutdown/ entirely if profit prospect
is poor. The resources are thus transferred into more profitable investment
areas/endeavors. Similarly, new firms will enter into the industry if profit prospect is
attractive or are greater than profits elsewhere. Hence, adjustment of the number of firms
in the industry in response to profit motives is the key element in establishing the long
run equilibrium.
In the long run, firms are in equilibrium when they have adjusted their plant size so as to
produce at the minimum of the long run average cost (LAC) curve. At this point the LAC
will be tangent to the demand curve defined by the market price. Therefore, the equality:
LMC = SMC = SAC = LAC = P = MR is the long run equilibrium condition of a
competitive firm. The implication is that competitive firms will earn only normal profit in
the long run.
LMC SAC
SMC LAC
P DD = MR
Lq Q
183
Assume for simplicity that there are 100 identical firms that are supplying the same
amount of output in the short run. Further assume that the business they engaged in is
profitable. The short run market/industry supply is thus 100 multiplied by the supply of
each firm or simply 100(q1) indicated on the industry supply curve, ∑q 1 . As mentioned
earlier, we can now expect that the short run excess profit enjoyed by the firms in the
industry will attract new firms into the industry.
∑q 1
SMC
SAC
∑q 2
A ES
P1 MR1
D B EL
MR2
P2 C
D
q2 q1 100(q1) 180(q2)
Firm Market
Figure 5.10: Derivation of Long Run equilibrium of Firms from the Short Run
Equilibrium
As shown in Figure 5.10, the individual firms are in the short run equilibrium when each
supplies q1 units of output. It cannot be the long run equilibrium because each firm in the
industry earns excess profit shown by area ABDP1 in the first graph as P1 > ATC . Each
time new firms (attracted by the excess profit) enter into the market, the market supply
curve will shift to the right. The entry of firms will continue until the industry supply
curve shifts to ∑q 2 , the market price falls to P2, each firm produces q2, and firms in the
business obtain normal profit. At this point, suppose 80 new firms have entered into the
market. Therefore, the long run industry equilibrium output will be 180(q2).
184
The Long Run Equilibrium of the Industry/Market
The industry is in the long run equilibrium when a price level reaches a point where all
firms are in equilibrium. That is, when all firms produce at the minimum point of the
LAC curve or when LMC = SMC = SAC = LAC = P = MR , and each firm just makes a
normal profit. With all firms in the industry being in equilibrium and with no entry and
exit, then the industry supply curve remains stable and given the demand curve, the price
will be the long run equilibrium price.
SAC
SS SMC LMC LAC
P
P3
DD
Lq Q
100*q3 Q
Therefore, the difference between the short run and long run equilibrium is that although
demand equals supply in both cases, the long run equilibrium is defined at a point where
demand is equal to supply and no excess profit is obtained.
Activity 18
1) Referring to Figure 5.10 above, what is the price elasticity of supply if an individual
firm supplied 18 units of output when P1 was $6 and 12 units when the market price
falls to P2 = $3?
2) Based on the price and output information in question 1, calculate the elasticity of
market demand?
185
3) Do you expect any of the 180 firms to exit out of the business at P2? Why or why
not?
Perfect competition is regarded as the most ideal market from the point of view of
resource allocation; resource utilization; resource employment; and consumers’ welfare.
When the long run equilibrium is achieved, the economy operates at the maximum
economic efficiency. This is because:
# individual firms operate at the optimal plant sizes and produce optimal level of
output,
# consumers buy different units of each output at the price equal to the minimum
attainable average cost per unit (P = LAC).
This implies that each consumer buys those quantity of goods at which the marginal rate
of substitution (MRS) between any two goods is equal to the price ratio of the two goods.
Put differently, the marginal utility of the consumed good (MU) equals the price (P) at
competitive equilibrium, which in turn equals the marginal cost (MC) of producing the
good. The discussion in the following three steps show that, if MU = P = MC , allocation
is efficient or optimal.
1. P = MU : Consumers choose to purchase a good up to the amount corresponding
to P = MU . As a result, every person is gaining utils of satisfaction from the last
unit of the good consumed as good as what he/she pays. Since the prices of goods
are the lowest, consumers’ welfare is maximized.
2. P = MC : The equilibrium condition of a perfectly competitive firm is given by
P = MC. From the viewpoint of laborers, workers are supplying their sweaty
labor up to the point where the utils of satisfaction lost by working that last bit of
time needed to produce the last unit of the good (output price/value) exactly
equals the firm’s MC of producing the last unit of the good supplied. The MC (of
the firm) is the price/wage paid to the laborer for the cost they incur in terms of
186
the utility of leisure forgone and the disutility of the sweaty labor needed to
produce the last unit of the good.
3. Putting these two equations together, we see that MU = MC . This means that the
utils gained from the last unit of good consumed exactly equals the utils lost for
sweaty labor required to produce that last unit. It is exactly this condition – the
marginal gains of society from the last unit consumed equal the marginal costs of
society for that last unit produced – which guarantees that a competitive
equilibrium is efficient.
Hence, both the allocation and utilization of resources are optimal under perfect
competition.
To the contrary of this quality of perfect competition, as we will see in subsequent units,
the imperfect markets (monopoly, monopolistic competition, and oligopoly) fall short of
reaching such an efficient and welfare-maxima equilibrium.
UNIT SUMMARY
# A perfectly competitive firm is the one that can sell an amount of output it wants at
the ongoing market price. Competitive firms are assumed to maximize their profit
(or minimize losses). To maximize profits, the competitive firm will choose that
output level at which price equals marginal cost of production, i.e., P = MC .
Diagrammatically, the competitive firm’s equilibrium will come where the rising
MC curve intersects its horizontal demand curve.
# Variable (or avoidable) costs must be taken into account in determining firm’s
short-run decision to shutdown or to continue operation. Below some critical price
(the shutdown point), the firm’s revenue will not even cover the variable cost that
could be saved completely if it shuts down. Rather than end up losing more than
fixed costs by operating, it would be better if the firm shuts down and produce
nothing when price falls below the shutdown price.
187
# The rising part of the MC curve of each firm above the shutdown price is its supply
curve. To obtain the supply curve of a group of independent competitive firms, we
add horizontally their separate supply curves. Hence, the supply curve of an
industry represents the marginal cost curve for the competitive industry as a whole.
# In the long run when firms are free to enter and leave the industry and where no one
firm has any particular advantage of skill or location, competitors will compete and
eat away any excess profits earned by existing firms in the industry. So as free entry
means P cannot persist above the breakeven point and free exit means P cannot
fall below that point, all firms just earn normal profit in long-run equilibrium.
# The analysis of competitive markets shed light on the efficient organization of a
society. Productive and allocative efficiency occur when there is no way of
recognizing production and distribution such that anyone’s satisfaction or profit can
be improved without hurting others. A different way of defining efficiency (in
production and consumption) is to say that it is a situation where no single
individual/firm is made better off without making other(s) worse off.
# Under ideal conditions, a competitive economy attains allocative efficiency. This
occurs because of three step conditions: (a) First, when consumers buy goods in
market, they buy that amount for which the marginal utility just equals the price. (b)
Secondly, competitive producers choose to supply goods where the marginal cost is
just equal to price. (c) Since, MU = P and MC = P , it follows that MU = MC .
Thus, the social cost of producing a good under competition just equals its marginal
utility.
188
SELF-TEST QUESTIONS
I. Discussion Questions
1. Suppose the market price a competitive firm faces in the short-run is Birr 10.
Moreover, its fixed cost is Birr 40. The output level ( Q ) and the corresponding
variable costs ( TVC ) are as given in the table below.
Q 0 5 10 15 20 25 30 35 40 45 50
VC 0 30 60 80 120 170 225 287 340 410 520
(A) Compute the TR, MR, TC, ATC, AVC, and profit or loss of the firm at each
level of production and present the results in a table similar to Table 5.1.
(B) What will be the short run equilibrium output?
(C) Show the short run equilibrium and profit levels graphically using the marginal
approach
189
(D) Derive the short run supply curve of the firm from your graph in (C) and
interpret the implication of the lowest point from which the supply curve
begins.
(E) Calculate the producer’s surplus at the equilibrium.
(F) Calculate the elasticity of demand at the equilibrium price and output.
2. Suppose there were 80 identical firms operating in the industry in the short run.
Price was Birr 10. Further assume that the short run profit the existing competitive
firms enjoy attracts 80 more firms to enter the industry. The increase in output
following the entry of the new firms has also dampened market price from Birr 10 to
Birr 8.
(A) What will be the long run equilibrium output of a firm and the industry?
(B) How much profit do firms in the industry enjoy? What is the implication of the
profit?
(C) Derive the short run and long run supply curves of the industry.
(D) What happens to the consumers’ surplus?
3. Suppose the short run market price a competitive firm faces is Birr 9 and the total
cost of the firm is: TC = 200 + Q + 0.02Q 2 . Answer the questions that follow.
(A) Calculate the short run equilibrium output and profit of the firm.
(B) Derive the MC, ATC, and AVC and calculate the values at the short run
equilibrium output.
(C) Calculate the producers’ surplus at the equilibrium output.
(D) Find the output level that will make the profit of the firm zero.
190
UNIT SIX
PURE MONOPOLY
UNIT INTRODUCTION
The second market structure in which we analyze the interaction between producers and
consumers is that of (pure) monopoly. Monopoly is a market structure in which there is
only one supplier in the market (industry). Since there is only one firm in the market, the
demand and supply curves of a monopoly are also the industry demand and supply
curves.
When there is only one firm in the market, the firm is unlikely to take the market price as
given. Instead, the monopolist would recognize its influence over the market price and
choose that level of price and output that will maximize its overall profit. Of course, a
monopoly firm cannot choose price and output independently. Because, for any price, the
monopoly will sell only what the market will bear. If it chooses high price, consumers
will demand small quantity. In other words, the demand behavior of consumers will
constrain the monopolist’s choice of price and quantity.
UNIT OBJECTIVES
191
6.1 THE CHARACTERISTIC FEATURES OF PURE MONOPOLY
As a result of these features, price will be higher and output will be lower than
competitive market. Moreover, a monopolist operates at a point where P(= AR ) is greater
than MC . This is regarded as the inefficiency of monopoly in terms of resource allocation
and maximizing social welfare. The price of a monopolist is derived from the profit
maximization equation as follows.
π = TR − TC
= PQ − TC ------------------------------------------------------- (1)
The equilibrium of a monopoly is MR = MC which is similar to the equilibrium condition
of perfectly competitive market discussed in Unit Five.
dTC
We know that MC = . And, MR is derived as follows:
dQ
dTR dPQ
MR = = ---------------------------------------------- (2)
dQ dQ
Since monopoly price is not constant as in the case of perfectly competitive market, price
cannot be equal to MR for a monopolist. Using the product rule of differentiation
the MR is:
192
PdQ QdP QdP
MR = + = P+ ------------------------------- (3)
dQ dQ dQ
Since the price elasticity of demand for normal goods is always negative, equation (5)
can also be written as:
⎡ 1 ⎤
MR = P ⎢1 − ⎥ -------------------------------------------- (6)
⎣ /εP /⎦
Recall that the price elasticity of demand for normal goods is always negative due to the
law of demand, which postulates an inverse relationship between price and quantity
demanded. Moreover, since the importance of elasticity is to understand the magnitude of
responsiveness of consumers to changes in price, it is conventional to use absolute value
in order to make it a positive value.
193
The above equation will be used to obtain either the monopolist’s price, its MR , or its
price elasticity of demand ( ε p ) when any two of the three variables are known. You
⎡ ΔQ P ⎤
should note that, this formula is more relevant than the usual ⎢ . ⎥ in terms of
⎣ ΔP Q ⎦
yielding accurate ε P value for the monopolist’s product unlike when discrete price and
output values of a monopolist are given.
We can also use the elasticity formula to express the optimal pricing policy of a
monopolist. The optimal price of a monopolist is:
MC
P= ----------------------------------------------- (8)
⎡ 1 ⎤
⎢1 − ⎥
⎣ /εP /⎦
Equation (8) indicates that the market price of a monopolist is a markup over its marginal
cost; where the amount of the markup also depends on the elasticity of demand. The
markup is:
1
---------------------------------------------------- (9)
⎡ 1 ⎤
⎢1 − ⎥
⎣ /εP /⎦
Since a monopolist will always operate where the elasticity of demand for its product is
elastic due to barriers to entry, we know that / ε P / is greater than unity. Hence, the
1
markup is also greater than one. That is, since / ε P / > 1, < 1. It follows that
/εp /
1
1− – the denominator of equation (9) – is between zero and one. Finally, 1 divided
/εp /
194
6.2 ORIGINS OF MONOPOLY POWER
There are several factors that lead to the origin of monopoly power. There are barriers to
entry and exit. The four types of barriers are:
1. The minimum efficiency scale (MES);
2. Exclusive (special) knowledge of low cost production or technology;
3. A control over strategic raw materials; and
4. Government may grant a firm an exclusive right to serve the market for a
particular product or service.
In the first graph of Figure 6.1, there is a room for other firms to enter into the market,
each charging a price close to P* and operating at a relatively small scale since the MES
is less than the market demand, QM. In the second graph, only one firm can make positive
profit and the firm will be a monopolist. This is because, the incumbent firm (or the firm
already in the market) in the latter case has enough cost advantage to be able to
discourage other firms from entering into the industry as compared to the monopolist in
the first market. Therefore, we would expect that the first market might operate as a
competitive market and the second would operate as a monopolist.
195
P P ATC
ATC
MC MC
P* P*
O Monopolist
A MES withQSmall
M MES Q AOMonopoly with
MESLarge
QM MES Q
Technology may be such expensive that relatively large firms can invest and produce at a
lower cost. Another reason is, the size of the market may not allow the existence of more
than a single large plant size monopoly. Once a monopoly power is established entry will
be difficult because any new entrant must be able to produce at a relatively low cost
compared to the already established monopoly. This is likely to result in loss for these
potential firms, as it likely corresponds to a price level below the shut-down price.
Examples include electricity, telecommunication, and other utilities in our country.
Macroeconomic policy of a country can influence the size of the market. If a country
follows non-restrictive foreign trade policy, domestic firms may face competition from
foreign firms and hence the domestic firms’ power to influence price will be much less. A
good example is the competition the Ethiopian Airlines (EAL) faces from foreign
Airlines (Airways) in international flights or transporting citizens and foreigners to the
outside world. The implication is that if the EAL sets higher fares for international
flights, people would prefer to travel through other countries Airlines or Airways and
hence EAL would lose its market share.
196
Conversely, if a country follows restrictive trade policy in the sense to protect domestic
firms from foreign competitors so that the market size is limited to the citizens of its own
country, then monopolistic practices are more likely to take hold.
Hence, if monopoly arises due to large MES relative to the market size and it is not
feasible to increase the size of the market and/or if there is no threat from foreign firms,
then the industry is liable to some form of regulation or government intervention. In
practice, both regulation of monopoly power and government intervention are costly.
Thus, from society point of view, the question should be weather the deadweight loss of
monopoly exceeds the cost of regulation or not. In developing countries, the deadweight
loss of monopoly is greater than the cost of regulation. Therefore, in most developing
countries, public provision of essential public services and utilities for development is
preferred to leaving them in the hand of monopolists.
A monopolist established due to the above factors, will have enough cost advantage to be
able to discourage other firms from entering into the industry. The incumbent firm (or the
firm already in the market) may also, under certain conditions, threaten potential entrants
that it will cut prices if they attempt to enter into the industry.
197
4) Government may grant a firm an exclusive right to serve the market for a
particular product or service:
A monopoly established due to the right given by the government to serve solely a given
market or geographical area within its jurisdiction is called franchise. The best example
of such a monopoly in Ethiopia is the National Lottery.
Activity 19
1. What are the differences between a perfectly competitive firm and a pure
monopolist?
2. Discuss the different sources of monopoly power.
The short run cost functions confronting a monopolist are identical with those faced by a
competitive firm. That is, the short run MC, AVC, and ATC are all U-shaped while AFC
is hyperbola. Wide U-shape of ATC, as in the case of the monopolist in the second
market in Figure 6.1, implies that the capacity of the plant installed is very high.
Unlike perfectly competitive market, however, a unique supply curve cannot be derived
from the MC curve of a monopolist. This is because since entry to and exit from the
market is difficult, the price of a monopolist cannot reach the minimum point
of AVC (or , MC = AVC ) . The probability that monopoly price will be equal or below the
minimum of AVC depends on the strategy of the incumbent monopolist to discourage
potential entrants by reducing its price.
As mentioned under Section 6.1, the profit maximization rule is the same in both perfect
competition and monopoly markets. Accordingly, a monopolist will choose to produce
output level for which MR = MC in order to maximize profit. Moreover, price is equal to
average revenue ( P = AR ) in both markets. Nevertheless, the marginal revenue of a
monopolist at any unit of output/production is always less than its price ( MR < P ) unlike
198
that of price-taker competitive firms where marginal revenue is equal to the ongoing
market price ( MR = P ).
In order to understand the short run equilibrium price and output of a monopolist it is
important to derive the relationship between demand, price, and average and marginal
revenue curves. The relationship can be best explained mathematically. To this end,
recall that there is an inverse relationship between price and quantity demand for normal
goods. This law of demand implies that the demand function for normal goods is
downward sloping. If we assume a linear demand function (for simplicity), we would
have a demand function of the form: Q = α − β P; where alpha (α ) and beta ( β ) are
constant numbers. From this demand function, the following important points and
relationships can be derived:
dQ
1) The slope of the demand function: = −β
dP
dQ P P
2) The price elasticity of demand: ε P = . = −β .
dP Q Q
3) The inverse demand function: Q = α − βP ⇒ Q − α = − β P. Rearranging this gives:
α 1 α 1
P= − Q , setting = a; = b we get
β β β β
P = a − bQ . From this a is the vertical intercept and − b is the slope.
4) Total revenue: TR = P.Q
TR = (a − bQ)Q
TR = aQ − bQ 2
TR aQ − bQ 2
5) Average revenue: AR = = = a − bQ = P
Q Q
dTR
6) Marginal revenue: MR = = a − 2bQ ; where a is the vertical intercept (the level
dQ
of MR when output is equal to zero) and − 2b is the slope of the MR curve.
From equation (6) above, it is also clear that the MR of a monopolist is a downward
sloping straight line with the same vertical intercept as the price equation or inverse
199
demand function but with a slope which is twice steeper. That is, the slope of the price
equation in equation (3) is − b and that of the MR in equation (6) is − 2b . Note that the
values of price and MR in equations (3) and (6) corresponding to Q = 0, give the vertical
intercept equal to a , and this is the only point at which P = MR for a pure monopolist.
Furthermore, elasticity of demand will be unitary and that of the TR will be at its
maximum when MR = 0. [See Figure 6.2].
P, MR, TR
/εp / >1
TR
/εp / =1
P*
/εp / <1
DD
MR=0 Q
Figure 6.2: The Relationship among Demand, ε p , MR, and TR under Monopoly
You should also note that a monopolist would always operate in the short run in the
region where the price elasticity of demand in elastic. This implies that a monopolist will
not set a price that will make elasticity of demand inelastic ( / ε P / < 1 ) (i.e., below P * in
the above figure), unless it has a strategy of deterring potential firms from entering into
the market (by reducing price below P * ). The reason is that the MR of a monopolist (the
additional revenue accrued to the monopolist due to sale of an additional unit of output)
will be negative when the price elasticity of demand is less than one (or inelastic).
With the short run profit maximization condition of a monopoly firm at hand, we can
now determine the short run equilibrium price and output as well as the profit of a
monopolist. To do so, we need to have information on either (1) a serious of output sold
(quantity demanded for its product) and price per unit of output (or in short unit price)
200
charged by a monopolist of our concern or (2) the market demand function it faces for its
product and its total cost function, representing the plant capacity installed, to meet the
current and future demand. The main procedures one should follow in order to determine
the monopolist’s short run equilibrium price, output, and profit depending on the type of
information provided are illustrated using two examples for normal goods.
Example 1: Suppose we have information only about the amount of output supplied by a
hypothetical ABC monopolist and the unit price consumers are charged per output
demanded (as shown in columns 1 and 2 of Table 6.1). Having this information, the short
run equilibrium output and price of the monopolist as well as its profit associated to each
amount of output sold are determined as shown in the same table (Table 6.1).
From the table above, the maximum profit is 328. The monopolist achieves this profit
when the demand for its product is either 36 or 50 units. Despite this, the monopolist will
supply 50 units of output in stead of 36 since the short run profit maximization condition
or the equality of its marginal revenue and marginal cost ( MR = MC = 8.6 ) holds only at
this output level. Accordingly, the short run equilibrium price is Birr 15.8. Furthermore,
the equilibrium output, price, and profit of the monopolist can be depicted graphically
using the marginal approach as follows.
201
P, MC, ATC Profit
ATC
MC
15.8
9.24
8.60 E
50 Q
After determining price, the marginal revenue and marginal cost of the monopolist, we
can also calculate the price elasticity of demand using equation (6) of Section 6.1. That is,
price elasticity of demand is calculated as follows:
⎡ 1 ⎤
MR = P ⎢1 − ⎥.
⎣ /εP /⎦
Substituting the values of MR and P , we get:
⎡ 1 ⎤
8.6 = 15.8⎢1 − ⎥.
⎣ /εP /⎦
/ ε P /− 1
Rearranging this gives: 8.6 = 15.8[ ].
/εP /
15.8 / ε P / − 15.8
⇒ 8.6 =
/εP /
202
about 2.2 percent, and vice-versa. Note that the accuracy of this value of / ε P / can be
verified by substituting this value into equation (6) to obtain MR = 8.6 or into equation
(7) to obtain MC = 8.6 .
As mentioned earlier, we also know that the monopolist’s price is always greater than the
MC of producing an additional unit of output. The issue is thus to know by how much the
price of the monopolist is markup over its MC ? The markup can be determined using
equation (9) of Section 6.1 as follows:
1 1
Markup = =
⎡ 1 ⎤ ⎡ 1 ⎤
⎢1 − ⎥ ⎢1 − . ⎥
⎣ /εP /⎦ ⎢⎣ 2.19 4 ⎥⎦
1 1 1
= = = = 1.84
⎡ .
⎤ ⎡ .
⎤ 0.544303798
⎢ 2.19 4− 1⎥ ⎢ 1.19 4 ⎥
⎢ 2.19 4. ⎥ ⎢ 2.19 4. ⎥
⎣ ⎦ ⎣ ⎦
Example 2: Unlike the above example, suppose that we now have information only about
the market demand function a hypothetical XYZ monopolist faces for its product and its
total cost function. Suppose the demand and cost functions are Q = 60 − 0.5 P and
TC = 48 + 3Q 2 , respectively. The steps involved in order to obtain the short run output,
price, and profit of the monopolist are given below.
Solution:
(A) The steps involved to find the short run equilibrium output and price levels are:
1st: Find the inverse demand function.
Q = 60 − 0.5 P
⇒ Q − 60 = −0.5P
60 Q
⇒P= − = 120 − 2Q
0.5 0.5
2nd: Find TR.
TR = PQ
203
TR = (120 − 2Q)Q = 120Q − 2Q 2
3rd: Find MR.
dTR
MR = = 120 − 4Q
dQ
4th: Find MC.
dTC d (48 + 3Q 2 )
MC = = = 6Q
dQ dQ
5th: Equate MR to MC.
⇒ 120 − 4Q = 6Q
⇒ 120 = 6Q + 4Q
⇒ 120 = 10Q
⇒ Q = 12.
6th: Substitute Q = 12 into the inverse demand function to obtain price.
P = 120 − 2Q = 120 − 2(12) = 96
Therefore, the short run equilibrium output and price of the monopolist are 12 and 96
respectively.
(B) The profit of the monopolist is calculated as:
π = TR − TC
π = [120Q − 2Q 2 ] − [48 + 3Q 2 ] .
Substituting Q = 12 , we get:
204
MR = 120 − 4(12) = 72 MC = 6(12) = 72
2nd: Find ATC at Q = 12
TC 48 + 3Q 2
ATC = =
Q Q
MC
ATC
96
72 E
40
12 30 Q
Activity 20
On the basis on the information given in Example 2 above, answer the questions below.
1. Calculate the price elasticity of demand and the markup at the short run equilibrium
output and price of the monopolist XYZ.
2. What will be the value of the price elasticity of demand when MR is 40 and price is
80?
3. What level of output makes the MR zero? What will be the price level and TR at
this output level? How about the elasticity of demand?
205
6.4 THE LONG RUN EQUILIBRIUM OF A PURE MONOPOLIST
In the long run, the monopolist will have time to expand its plant size or to use the
existing plant optimally to produce output that will maximize profit. Hence, if the
monopolist earns excess profit in the short run with the existing plant(s), it must
determine weather a plant of different size will earn larger profit in the long run or not.
Since entry is blocked, it is not necessary or a must for a monopolist to operate at optimal
scale. In other words, there is nothing that induces to install additional plant size so as to
operate at the minimum of LAC (where LAC will be equal to the LMC) and obtain
normal profit if not its own strategy.
The LMC is the change in total cost associated with the change in output when all factors
including the plant scale vary or when the plant size itself is changed (in the long run). To
understand how the long run marginal cost (LMC) and long run average cost (LAC)
behave, assume that a monopolist has installed two plant sizes in the short run in order to
meet the current and future demand for its product. Furthermore, assume that the change
in quantity demanded to a change in price is constant. Given the relevant information in
Table 6.2 below, Table 6.3 helps us compute the LMC and LAC.
Q MR TC1 TC2
0 -
1 34.5 11 14.25
2 33.5 14 15.00
3 32.5 19 16.25
4 31.5 26 18.00
206
Table 6.3: Determination of the LMC from Short Run and Long Run Plants
The problem of the monopolist is which of the two plants should be used in the short and
long run in order to maximize profit. If the monopolist wants to produce only one unit of
output in the long run, then the best choice would be to use plant one. This is
because SAC1 < SAC 2 or TC1 < TC 2 . If the monopolist wants to produce two units of
output, it should also choose to use the first plant. Since the first plant is chosen to
produce the first and second units, the SMC of the first plant will also be the LMC up to
the second unit of output.
However, the monopolist has to choose plant 2 if it wants to produce 3 units of output for
SAC 2 < SAC1 or TC 2 < TC1 . In this case, the LMC of the monopolist will be the
difference between the total costs of a plant chosen to produce 3 units output (plant 2)
and 2 units of output (plant 1). As indicated in the eleventh column of the third row of
Table 6.3, this will be equal to 2.25, which is TC2 (16.25) less TC1 (14). Furthermore,
since the plant 2 is the one to be chosen to produce 4 units of output, the LMC will be
1.75 (the SMC of the plant 2).
As indicated in Figure 6.3, the optimal plant of the monopolist in the long run is plant 2
whose SAC 2 is tangent to the LAC curve and the long run equilibrium is established at
point E 2 where MR = SMC2 = LMC. The corresponding unit price is P4.
It is thus clear from Figure 6.3 that the monopolist’s point of optimal operation is on the
falling part of LAC. To the contrary, producing 4 units of output in the long run (or
207
equilibrium point E 2 ) is not optimal from the viewpoint of the society for the monopolist
is not operating at the minimum point of the LAC (envelop) curve. This is because
producing 5 units at point E3 where the LAC is at its minimum and where
LAC = LMC = SMC2 = p (similar to the case of a competitive firm in the long run) will
increase the output of the monopolist and reduce selling price thereby eliminating the
excess profit that could be enjoyed by producing 4 units of output and implying a normal
(zero) profit. This implies that since there is output restriction or since the monopoly firm
does not produce at its full capacity, price is greater than MC in pure monopoly in the
long run. This situation, which arises due to restriction of output, is called the
Deadweight Loss (DWL) of pure monopoly. This will be discussed in detail under a latter
section.
Nevertheless, the monopolist may prefer to produce at point E3 only if there are firms
planning to enter into the market and hence the monopolist wants to discourage them or
block entry by reducing price.
SAC1
SMC1
P1
P2
SAC2
LMC
SMC2 LAC
P3
P4
E1
E3
E2
DD
MR
1 2 3 4 5 Q
Figure 6.3: The Long Run Equilibrium of a Pure Monopolist
208
Given the information in the table below, we can obtain the monopolist’s price if the
price elasticity of demand is given for any level of output. Once the monopolist’s price is
known, we can also determine the total revenue and the associated profit (or loss) for
both the short run and long run.
Q MR TC1 TC2
0 - - -
1 18 12 17.5
2 12.5 22.8 23.8
3 4 30 26.7
4 3.6 45 30.3
For example, let us calculate the price and short and long run profit (or loss) of the
.
monopolist if the price elasticity of demand of producing 4 units of output is 1. 6 .
Solution:
1st: Find the unit price of the monopolist when selling 4 units of output ( P4 ) .
1
MR4 = P4 (1 − )
/εP /
1
3.6 = P4 (1 − .
)
1. 6
3.6 = P4 (1 − 0.625)
3.6 = P4 (0.375)
3.6
P4 =
0.375 .
P4 = 9.6
2nd: Find the profit of the monopolist when selling 4 units of output. Since, plant 2 is used
to produce 4 units of output we should consider the total cost 5 of the second plant to
calculate profit (π 4 ) .
π 4 = TRQ 4 − TC Q 42 π 4 = Q4 ( P4 − SACQ 42 )
5
The subscript at the end of the total cost indicates the plant used.
209
30.3
π 4 = PQ − 30.3 OR π 4 = 4(9.6 − )
4
π 4 = 9.6(4) − 30.3
π 4 = 4(2.025) = 8.1
π 4 = 38.4 − 30.3 = 8.1
3rd: Find P3 , P2 , and P1 sequentially
− 34.5 = −3P3
34.5
P3 = = 11.5
3
TR3 − TR2 P3Q3 − P2 Q2
MR3 = =
Q3 − Q2 Q3 − Q2
11.5(3) − P2 (2)
4=
3−2
4 = 34.5 − P2 (2)
4 − 34.5 = −2 P2
30.5
P2 = = 15.25
2
TR2 − TR1 P2 Q2 − P1Q1
MR2 = =
Q2 − Q1 Q2 − Q1
15.25(2) − P1 (1)
12.5 =
2 −1
12.5 − 30.5 = − P1
P1 = 18
4th: Find profit by considering the total cost of a plant used to produce each level of
output.
π 3 = TRQ 3 − TC Q 32
210
π 3 = PQ − 26.7
π 3 = 11.5(3) − 26.7 = 7.8
π 2 = TRQ 2 − TC Q 21
π 2 = PQ − 12.5
π 2 = 15.25(2) − 22.8 = 7.7
π 1 = TRQ1 − TC Q11
π 1 = PQ − 12
π 1 = 18(1) − 12 = 6
Therefore, from the above profit figures we can conclude that the short run equilibrium
level of output of the monopolist is 2 units for it yields higher profit as compared to
producing and selling one unit of output (7.7 > 6). In the long run, however, as the profit
level from producing and selling 4 units of output (8.1) is greater than that of producing
and selling any other level of output (1, or 2, or 3), the monopolist will produce and sell 4
units of output and thus operates at a point where MR = SMC2 = LMC = 3.6.
Activity 21
1. Can a pure monopolist earn a positive economic profit in the long run? Why or
why not? Discuss.
2. Is the long run profit-maximizing condition (rule) of a monopolist the same as the
short run one?
211
charging different prices for the same or different quantities of a given quality of a
product or service to different class of buyers, and/or in different markets based on
elasticity of demand.
Price discrimination is workable when the following three conditions are realized:
(A) Monopoly power: The seller must be a monopolist or at least possess some degree of
monopoly power over the commodity or service. That is, it must have some ability to
control the production of the good or service and its price.
(B) Market segregation: The seller must be able to segregate buyers into separate classes
where each group has a different willingness or ability to pay for the product or
service. This segregation of buyers is based on the difference in elasticity of demand.
(C) No resale: The monopolist must be able to separate (or segment) the two or more
markets and keep them separate so that it is impossible for one buyer to resale the
product to another.
Economists usually consider three types of price discriminations. These are: first,
second, and third degree price discriminations.
First degree (perfect) price discrimination: This means that the monopolist sells
different units of output at different prices and prices may differ from person to person.
This means that the monopolist sells each unit of output to that individual who values it
most highly at the maximum price that he/she is willing to pay for it. This turns out that
perfect price discrimination produces an efficient level of output.
To prove this, note that a perfectly price discrimination monopolist must produce an
output level where price is equal to the marginal cost ( P = MC ) . If price is grater than
the MC, then it would mean that there is someone who is willing to pay more than what
it costs to produce an extra unit of output; so, why not produce that extra unit and sell to
that person?
212
However, perfect price discrimination is an idealized concept as the word “perfect”
might suggest. But it is interesting theoretically since it gives us an example of a
resource allocation mechanism (other than perfectly competitive market) where Pareto
efficiency is achieved. By Pareto efficiency, we refer to the situation where all the
possibilities of making someone better off without making others worse off have already
been carried out. There are few real life examples of perfect price discrimination. A
small town doctor who charges different prices to his/her patients based on their ability
to pay is one of the closest examples of perfect price discrimination. Other examples
include, the prevailing differential prices to different classes or ranks of train
transportation; international air transportation (the payment for economic and business
class are different though two people fly in the same airplane); cinema hall; football
match etc. For example, the prices can be differentiated as first class or rank ticket-Birr
60, second rank-Birr 40; and third rank-Birr 30 to watch a football match in a stadium; a
movie in a cinema hall, or to travel through train.
Second degree (non-linear) price discrimination: This means that a monopolist sells
different units of output for different prices; but every individual who buys the same
amount of output pays the same price. In other words, price differs across the quantity of
goods consumed or depending how much is bought but not across people like first
degree price discrimination. The most common examples of this type of price
discrimination are the practice of charging different prices for consumption at different
bands (blocks) and bulk discounts in public utilities.
For example, the price of electricity often depends on how much is consumed. Suppose
an electricity supplier charges consumers a progressive rate across bands say for the first
50KWH each at a price of 0.2730 cents; for the next 50 KWH each at 0.2921 cents; and
the next 100KWH each at 0.4508 cents. In this case, the payment/ bill of the household
who consumed 200 KWH a month is:
Bill = [(50 x0.2730) + (50 x0.2921) + (100 x0.4508)]
= 13.6 + 14.605 + 45.08 = 73.335
213
The above example indicates that the price charged by the hypothetical electricity
supplier is progressive in a sense price per unit increases as consumption increases from
one band to another. That is, any output or service consumed within the next higher
consumption band will cost higher price and hence the decision to consume more
depends on the willingness and ability to pay of the consumer.
Contrary to the example above, sometimes monopolists offer discounts for bulk
purchases, in most cases across blocks. The price charged by such type of monopolist is
regressive because price per unit decreases as consumption increases from one block to
another. In this case, consumers who purchase large quantities of the monopolist’s
product or service may face a price equal to MC at some level of purchase.
From the viewpoint of social welfare, since there is consumption at a price greater than
MC (at least for some consumers), there are some ways to make some consumers in the
market better off without making others worse off. That is, not all the possibilities to
maximize social welfare are exhausted. Hence, second degree (non-linear) price
discrimination is Pareto inefficient.
Third degree price discrimination: This occurs when a monopolist charges different
prices for the same commodity in different markets; but every unit of output sold in a
given market is sold at the same price. For this to happen markets must be kept separate
(no resale) and the elasticity of demand of these two or more markets must be different.
Third degree price discrimination is the most common form of price discrimination. An
example of charging different prices in different markets is found in international trade
when a nation sells its commodity abroad at a lower price than in its domestic market.
This is referred to as dumping. The reason for dumping is that the demand for a
monopolist product is more elastic abroad because substitutes are available from other
nations whereas there can be import restriction in domestic market making the domestic
demand less elastic.
214
The key issue of third degree price discrimination is: “How does a monopolist determine
the optimal price to charge in each market?” The answer is based on the
conditions/assumptions that consumers in each market are not able to resale the good in
another market, and that there are different elasticities of demand in the two (or more)
markets.
To illustrate this with an example, assume that a monopolist sells its product only in two
markets. Furthermore, let p1 (q1 ) and p2 (q2 ) be the inverse demand functions of market
1(domestic) and market 2 (abroad), respectively. In addition, let c(q1 + q2 ) be the cost of
producing the output. Thus, the profit maximization problem of the monopolist is:
Max p1 (q1 )q1 + p 2 (q 2 )q 2 − c(q1 + q 2 ) ---------------------------------------- (1)
q1 ,q2
⎡ 1 ⎤
p2 (q2 ) ⎢1 − ⎥ = MC (q1 + q2 )
⎣ / ε P (q2 ) / ⎦
⎡ 1 ⎤ ⎡ 1 ⎤
These two conditions imply that: p1 (q1 ) ⎢1 − ⎥ = p2 (q2 ) ⎢1 − ⎥
⎣ / ε P (q1 ) / ⎦ ⎣ / ε P (q2 ) / ⎦
⎡ 1 ⎤
⎢1 − ⎥
p1 (q1 ) ⎣ / ε P (q2 ) / ⎦
⇒ = ------------------------------------------------------------- (3)
p2 (q2 ) ⎡ 1 ⎤
⎢1 − ⎥
⎣ / ε P (q1 ) / ⎦
215
If price in the first market is greater than price in the second market ( p1 > p 2 ) , then each
side of equation (3) must be greater than 1 and thus we must have:
⎡ 1 ⎤ ⎡ 1 ⎤
⎢1 − ⎥ < ⎢1 − ⎥ ------------------------------------------------ (4)
⎣ / ε P (q1 ) / ⎦ ⎢⎣ / ε p (q2 ) ⎥⎦
This implies that,
1 1
> -------------------------------------------------- (5)
/ ε P (q1 ) / / ε p (q2 )
Equation (6) says that the market with a lower elasticity of demand (price insensitive)
must have the higher price while the price sensitive market will have lower price. The
validity of this argument is illustrated with the help of a numerical example below.
Example: Suppose the demand functions a monopolist faces in market 1 and market 2
are q1 = 55 − p1 and q 2 = 70 − 2 p 2 , respectively. Furthermore, assume that its cost
function is TC = 5Q + 20 . With this information at hand let us:
1) determine q1 , q 2 , p1 , and p 2 that maximize the profit of the monopolist;
2) calculate the profit of the monopolist from selling its product in the two markets;
3) determine the price elasticities of demand in the two markets; and
4) show the outputs and prices of the two markets using the back-to-back diagram
Solution:
dTC
From the given cost function, the common marginal cost is: MC = = 5.
dQ
1. Outputs and prices of the monopolist
(a) For market 1
st
1 : Find the inverse demand function.
q1 = 55 − p1
p1 = 55 − q1
2nd: Find TR1 = p1 q1
216
TR1 = (55 − q1 )q1
= 55q1 − q12
dTR1
3rd: Find MR1 =
dq1
MR1 = 55 − 2q1
4th: Equate MR to MC.
MR1 = MC
55 − 2q1 = 5
− 2q1 = 5 − 55
− 2q1 = −50
50
q1 = = 25
2
5th: Substitute q1 = 25 in the inverse demand function.
p1 = 55 − q1 = 55 − 25 = 30
(b) For market 2
1st: Find the inverse demand function
q 2 = 70 − 2 p 2
q 2 − 70 = −2 p 2
70 q 2
p2 = − = 35 − 0.5q 2
2 2
2nd: Find TR.
TR2 = p 2 q 2 TR2 = (35 − 0.5q 2 )q 2
=35q2-0.5q22
3rd: Find MR.
dTR2
MR2 =
dq 2
MR2 = 35 − q 2
4th: Equate MR to MC.
MR2 = MC
217
35 − q 2 = 5
− q 2 = 5 − 35
q 2 = 30
5th: Substitute q 2 = 30 in the inverse demand function.
p 2 = 35 − 0.5q 2
p 2 = 35 − 0.5(30)
p 2 = 35 − 15 = 20
2. The profit of the monopolist:
From the above solution the monopolist will sell 25 units of output in market 1 and 30 in
market 2. The price of a unit of output in market 1 is Birr 30 while it is Birr 20 in the
second market. Thus, total profit will be
π = (TR1 + TR2 ) − TC
= [(q1 p1 + q 2 p 2 ) − (5Q + 20)]
Since Q = q1 + q 2 the profit equation is also
π = [(q1 p1 + q2 p2 ) − (5(q1 + q2 ) + 20)]
= [(25 x30) + (30 x 20) − (5(25 + 30) + 20)]
= 750 + 600 − (5(55) + 20)
= 1350 − (275 + 20)
= 1350 − 295 = 1055
3. Price elasticity of demand
Market 1
q1 = 55 − p1
dq1
Slope: = −1
dp1
dq1 p1
/ ε p1 / = x
dp1 q1
30
/ ε p1 / = − 1x
25
218
30
/ ε p1 / = − = − 1.2 = 1.2
25
Market 2
q 2 = 70 − 2q 2
dq 2
Slope: = −2
dp 2
dq2 p2
/ ε p2 / = x
dp2 q2
20
/ ε p2 / = − 2x
30
40 .
/ ε p2 / = − = − 1.3 3 = 1.33
30
The above result tells us that demand is more elastic in market 2 as compared to market
1. Therefore, as described in equation 4 to 6 earlier in this section, the monopolist charges
lower price in market 2 compared to market 1.
4. Back to back diagram
The relationship between output and prices in the two markets can be represented using
what is known as the Back to back diagram as follows.
P1=30
P2=20
MC = 5
DD1
MR1 MR2 DD2
q1
q1=25 q2=30 q2
Market 1 Market 2
Figure 6.4: The Back to Back Diagram of Third Degree Price Discrimination
219
From the above figure, it is clear that the market with lower elasticity of demand
(market1) has higher price. This implies that the monopolist will charge high price in the
market in which quantity purchased is less responsive to price changes.
So far it has been assumed that a monopolist owns and produces by means of only one
plant. Nevertheless, it is also possible for a monopolist to install more than one plant and
hence cost conditions may differ from one plant to another. Such a monopolist is called a
multi-plant monopolist. The problem of such a monopolist is the allocation of production
among the different plants (say, between plant 1 and plant 2 in the case of two plants).
The monopolist’s profit maximization rule is equating MR MC. However, we have only
one marginal revenue function and many marginal cost functions for a multi-plant
monopolist. For the case of a monopolist with two plants, we have:
MC1 = The marginal cost function of plant 1
MC 2 = The marginal cost function of plant 2
MC = Common or the multi-plant marginal cost function
The profit maximization rule of this multi-plant monopolist is depicted in Figure 6.5.
MC
MC1 MC2
DD
MR
O q1 q2 Q O Q* = q1+q2 Q
220
Example: Given the price and MC figures of two plants for each level of output,
determine the MR, the common MC, and the total output a multi-plant monopolist should
produce, and also find how much should be produced by each plant.
Q P MR MC1 MC2 MC
1 5.00 5.00 1.92 2.04 1.92
2 4.50 4.00 2.00 2.14 2.00
3 4.10 3.30 2.08 2.24 2.04
4 3.80 2.90 2.16 2.34 2.08
5 3.55 2.55 2.24 2.44 2.14
6 3.35 2.35 2.32 2.54 2.16
7 3.20 2.30 2.40 2.64 2.24
8 3.08 2.24 2.48 2.74 2.24
9 2.98 2.18 2.56 2.84 2.32
10 2.89 2.08 2.64 2.94 2.34
The common MC is obtained by arranging the MC figures in ascending order. The profit
maximizing level of output the multi-plant monopolist will produce is 8 units of output. It
is at this level of output that the MR will be equal to the common MC. Once the total
output to produce is determined, the monopolist will produce 5 units using plant 1 and 3
units using plant 2. This is because profit is maximized when MR = MC1 = MC2 = MC.
Mathematical Example:
Suppose a monopolist faces a linear demand function Q = 200 − 2 P for its product. Let, the
cost functions of the two plants be: TC1 = 10q1 and TC 2 = 0.25q 22 , respectively. Given the
above information, find q1 , q 2 , P and the profit of the multi-plant monopolist.
221
Solution:
= 100Q − 0.5Q 2
Marginal revenue
dTR
MR =
dQ
= 100 − Q
2nd: Find the marginal cost of the two plants; MC1 and MC 2
dTC1 d (10q1 )
MC1 = = = 10
dq1 dq1
dTC 2 d (0.25q22 )
MC2 = = = 0.5q2
dq2 dq2
222
100 − q1 − q 2 = 0.5q 2 ------------------------------------------------------- (2)
4th: Solve the two equations in step 3 using simultaneous equation procedures to obtain
the output levels to be produced by each plant.
⎧100 − q1 − q2 = 10
⎨
⎩[100 − q1 − q2 = 0.5q2 ](× − 1)
⎧100 − q1 − q2 = 10
⇒⎨
⎩− 100 + q1 + q2 = −0.5q2
⇒ 10 − 0.5q2 = 0
10
⇒ q2 = = 20 .
0.5
Substituting this output level into one of the two equations we found under step 3, we
get the optimal output that should be produced using plant 1. Let us substitute q 2 = 20
into the first equation.
100 − q1 − q 2 = 10
100 − q1 − 20 = 10
80 − q1 = 10
q1 = 80 − 10 = 70
After obtaining q1 and q2 you should check whether substituting them into both
equations will satisfy the equality. Do this before proceeding to the next step!
5th: Calculate the market price by substituting Q = q1 + q 2 = 20 + 70 = 90 into the inverse
demand function derived from the market demand in step one.
P = 100 − 0.5Q
P = 100 − 0.5(90)
P = 100 − 45 = 55
6th: Finally, calculate the profit of the multi-plant monopolist using the total revenue – total cost
approach. It can be calculated in two ways: either by substituting total output (Q) into the
total revenue function or obtaining total revenue by multiplying price and total output (Q) as
follows:
π = TR − (TC1 + TC 2 )
223
= (100Q − 0.5Q 2 ) − (10q1 + 0.25q22 )
= [100(90) − 0.5(90) 2 ] − [10(70) + 0.25(20) 2 ]
= [9000 − 4050] − [700 + 100]
= [4950 − 800] = 4150
OR
π = PQ − (TC1 + TC 2 )
= (55 × 90) − (10q1 + 0.25q22 )
Is the existence of a monopolist evil? The answer to this question depends on the pricing
decision of the monopolist. If the monopolist charges a single price, the answer is
“YES”! If the monopolist charges different prices based on the willingness to pay (WTP)
[or if the monopolist sells each unit at the maximum price consumers are willing to pay],
i.e., if the monopolist can exercise the first degree price discrimination, the answer to the
above question would be “NO”! That is, a monopolist exercising the first degree price
discrimination produces a Pareto efficient outcome as it expands output to the level
where P = MC. If the monopolist exercises the second or the third degree price
discrimination (block pricing, bulk discount, market segregation based on differences in
price elasticity of demand), the outcome is Pareto inefficient though the inefficiency is
minimal. To sum up, the existence of a monopolist charging a single price is evil; that of
a second or third degree price discriminator is less evil; and that of a first degree price
discriminator is consistent with social welfare maximization (just like a perfect
competitor).
We have seen in Unit Five that a remarkable outcome of a perfectly competitive market
is an efficient resource allocation, which results in a maximum social welfare and
maximum employment. This is because the equilibrium of a competitive firm is at the
224
equality of price and the MC of producing the good which implies that the marginal
utility ( MU ) of goods consumed is also equal to the price ( p ) charged. Hence, if
P = MC (i.e., allocation efficiency) and MU = P (i.e., maximization of consumers’
welfare), then MU = MC = P . Refer back to Unit Two on how the equality of P = MU is
derived based on the ordinalist argument.
Consumers’ surplus is the difference between what consumers are willing to pay for
different levels of quantity demanded (proportional DD curve; see DDP in the figure
below) and what they actually paid to consume QE amount of output (prorata DD curve;
see DD A in the figure below). The perceived demand curve can be linear or non-linear.
Because determining CS and PS from non-linear demand and supply functions requires
some advanced knowledge in integral calculus, which is beyond the scope of the course,
we restrict ourselves to the discussion of consumers and producers surpluses using linear
demand and supply functions for the mathematical example in this section.
In Figure 6.6, it is shown by the area to the left of the perceived DD curve and above the
equilibrium price or (prorata DD curve) or simply by area PE EP1 . In other words, it
represents money not spent by consumers who have the willingness to pay a price higher
than the equilibrium price or it is the savings of the consumers from buying QE at
equilibrium price PE .
225
P P MC=SS
P1 MC=SS P1
CS E CS E
PE DDA PE
PS PS
D DDP
DDP
QE QE
Linear Demand and Supply Curves Non-Linear Demand and Supply Curves
The MC of producing a good represents the supply curve. Equating the MC or the supply
curve that passes through point E to demand (as in the above graphs) gives the
producers’ surplus (PS). Producers’ surplus is the area above the MC curve but below
the equilibrium price ( PE ). The PS indicates the difference between the market price
(what competitive firms charge per unit) and the MC (what competitive firms actually
incur for producing different quantities of output). Put differently, it is the money that
suppliers receive solely because of selling each unit of output (below QE) at a price above
what they incur to produce that unit. In Figure 6.6, it is shown by the area PE ED.
These being the CS and PS in a perfectly competitive market, the social cost of
monopoly arises due to the fact that a monopolist operates inefficiently as compared to
perfect competition in the sense that price under monopoly ( PM ) is greater than price
under perfect competition ( PC ) or PM > PC and the monopolist’s optimum level of
output (QM ) is less than output under perfect competition (QC ) or QM < QC . This is
226
greater than both marginal revenue and marginal cost. Note that P > MC implies that the
value of the good measured in terms of market price is greater than the social cost
measured in terms of MC.
As a result, some part of the CS and PS in a perfectly competitive market are lost when
the market is monopolized by a single firm. These losses in consumers’ and producers’
surpluses due to monopoly power are known as the social cost or the Dead Weight Loss
(DWL) of monopoly. Consider the graph below.
P MC
PM A
PC B EC DDC=MRC=MC
EM
DDM
D
MRM
QM QC Q
Figure 6.7: The social Cost (Dead Weight Loss) of Monopoly
The above graph shows the change in the CS and PS when the market is changed from
competitive to monopoly or from monopoly to competitive. Consider the first case. As
the market changes from perfect competition to monopoly, the CS goes down by
area PC EC APM [area ABEC since they lose some surplus from the reduction in the units
that were used to be sold under perfect competition by QC − QM ; and area PC BAPM since
consumers are now getting all the units they buy at a higher price]. Alternatively, we can
consider what happens when a monopolist is replaced by a perfectly competitive firm. As
the market changes from monopoly to perfect competition, the CS goes up by
area PC EC APM [area PC BAPM since consumers are now getting all the units they used to
buy under monopoly at a lower price; and area ABEC since they now gain some surplus
227
from the additional units (QC − QM ) that are now sold in the market]. Let us continue our
discussion with the first approach – where a perfect competitor is replaced by a pure
monopolist.
The PS, on the other hand, goes up by area PC BAPM due to the higher price on the units
that were already being sold; and goes down by EM BEC due to the loss from the decline
The area PC BAPM is just a transfer from the consumers to the monopolist, and hence one
side of the market (the producer) is made better off while the other side (consumers) is
made worse off; but, the total surplus does not change as a result of this transfer.
However, the areas ABEC and EM BEC represent the Dead Weight Loss (DWL) due to
monopoly behavior.
The DWL provides a measure of how much worse off people are paying the
monopolist’s price than paying the completive price. The DWL due to monopoly like
that of the DWL due to tax increase measures the value of the lost output by valuing each
unit of lost output at a price that people are willing to pay for a unit. In other words, as
we move from competitive to monopoly output, the sum of the distance between the
demand curve and the MC curve generates (gives) the value of the lost
output (QC − QM ) due to monopoly behavior. The total area between the two curves
(area AEM EC ) is the DWL when moving from competitive to monopoly output.
Clearly, an economy is performing well when it generates much to the consumer surplus
and an inefficient situation is one in which the maximum amount of consumers’ surplus
is squeezed out of the system.
228
Numerical Example:
Assume that there is a tendency of moving from competitive to monopoly output. If the
demand and total cost functions are Q = 100 – 2P and TC = 14Q + 2Q2 respectively,
A. Determine PC, QC, PM, and QM.
B. Show the equilibrium Q and P you obtained in (A) above graphically.
C. Calculate the CS and PS under competitive and monopoly market structures.
D. Calculate the part of CS transferred to the monopolist due to inefficiency of
monopoly.
E. Calculate the social cost (net loss or DWL) of monopoly.
Solution:
A. Equilibrium Q and P:
(i) In perfectly competitive market:
P = MC
50 – 0.5Q = 14 + 4Q
50 – 14 = 4Q + 0.5Q
36 = 4.5Q
QC = 8
PC = 50 – 0.5Q OR PC = 14 + 4Q
= 50 – 0.5(8) = 14 + 4(8)
= 50 – 4 = 14 + 32
PC = 46 PC = 46
(ii) In monopoly market:
TR = P.Q
= (50 – 0.5Q).Q
= 50Q – 0.5Q2
∂TR
MR = = 50 − Q
∂Q
∂TC
MC = = 14 + 4Q
∂Q
Equate MR to MC: MR = MC
229
50 – Q = 14 + 4Q
50 – 14 = 4Q + Q
36 = 5Q
QM = 36/5 = 7.2
PM = 50 – 0.5Q
= 50 – 0.5(7.2)
= 50 – 3.6
PM = 46.4
B. Graphical presentation of the results under (A)
230
1
CS = (50 − 46.4)(7.2)
2
1
⇒ CS = (3.6)(7.2) = 12.96.
2
1
PS = (42.8 − 14)(7.2) + (46.4 − 42.8)(7.2)
2
1
⇒ PS = (28.8)(7.2) + (3.6)(7.2)
2
⇒ PS = 103.68 + 25.92 = 129.6
D. The amount of surplus transferred from consumers to the monopolist:
(PM – PC) x QM
= (46.4 – 46) x 7.2
= 0.4 x 7.2 = 2.88
E. DWL due to monopoly
Method (i)
The DWL is represented by the shaded area in the figure under (B) above. The area of
1
DWL = (46.4 − 42.8)(8 − 7.2)
the triangle shaded is: 2
1
⇒ DWL = (3.6)(0.8) = 1.44
2
Method (ii)
Alternatively, DWL is the (negative) net change in consumers’ and producers’
surpluses.
Changes in CS = CS under monopoly – CS under perfect competition. That is,
ΔCS = 12.96 − 16 = −3.04 (LOSS!)
Changes in PS = PS under monopoly – PS under perfect competition. That is,
ΔPS = 129.6 − 128 = 1.6 (GAIN!)
Thus, the net change (NCh) in consumers’ and producers surpluses is:
NCh = ΔCS + ΔPS
⇒ NCh = −3.04 + 1.6 = −1.44
The net change is negative – indicating an overall loss to the economy:
⇒ DWL = 1.44
231
Method (iii)
DWL = CS not transfered toProducers + PS Lost
1 1
DWL = ( PM − PC )(QC − QM ) + ( PC − MC at QM )(QC − QM )
2 2
1 1
DWL = (46.4 − 46)(8 − 7.2) + (46 − 42.8)(8 − 7.2)
2 2
1 1
DWL = (0.4)(0.8) + (3.2)(0.8)
2 2
⇒ DWL = 0.16 + 1.28 = 1.44
Conceptually, all the three methods are the same.
Activity 22
1. What are the necessary conditions for the practicability of price discrimination?
2. Is there any relationship between the prices a monopolist engaged in third degree
price discrimination charges and the price elasticities of demand in the segregated
markets? Discuss.
3. Differentiate between the concepts of price discrimination and multi-plant
monopolist.
4. How do you compare the social welfare aspects of perfectly competitive and
monopoly market structures?
232
UNIT SUMMARY
# When a single firm produces all the output in a given industry then we have an
imperfect market structure called monopoly, which is the exact opposite of perfect
competition. Unlike a competitive firm a monopolist is a price maker. As a result, a
monopolist faces a downward sloping demand curve.
# Economies of scale or decreasing average costs are the major sources of imperfect
competition in pure monopoly. When the minimum efficient size of plant is larger
relative to the national or regional market, the cost conditions of the monopolist
produce barriers to entry and hence monopoly power emerges. In addition to
declining costs, other forces leading to market imperfections such as legal
restrictions in the form of patents or government regulations are also barriers to
entry/competition.
# There is a spectrum between perfect competition and natural monopoly. Natural
monopoly occurs when average costs are falling for successive units of output so
that the industry requires a single most efficient firm. Few industries come close to
this condition today - perhaps local utilities like telephone, water, electricity etc.
# From a monopolist's demand curve, we can easily derive its total revenue. From the
schedule or curve of total revenue, we can easily derive its marginal revenue – the
extra revenue resulting from the sale of an extra unit of output. For a monopolist,
marginal revenue will fall short of price ( MR < P ) because of the loss on all
previous units of output that will result when it is forced to drop price in order to
sell an extra unit of output.
# A monopolist will find maximum profit position where the last unit it sells brings in
extra revenue just equal to its extra cost. This same MR = MC result can be shown
graphically by the intersection of MR and MC curves. Regardless of whether a
monopolist is a single plant or multi-plant monopolist the equality of marginal
revenue and marginal cost must hold at the equilibrium.
# A monopolist may sell its product or service of a given quality to different
consumers at different prices for reasons unrelated to costs. Such a practice is called
price discrimination. The three necessary conditions that must be fulfilled for price
233
discrimination to take place are: (a) monopoly power; (b) market segmentation; and
(c) there should no be resale of products from one market to another. The basis for
price discrimination are consumers’ ability to pay (first degree or perfect price
discrimination); quantity of output consumed (second or non-linear price
discrimination); and elasticity of demand (third degree price discrimination).
# Exercise of monopoly power also leads to economic waste when price rises above
marginal cost. This is because a monopolist produces where MR equal MC and
consequently produces less output than where MC equals price (less than the point
of allocation efficiency). In other words, a monopolist does not produce the optimal
level of output where the social cost (as measured by MC ) is equal to the value of
the good to consumers or social welfare (as measured by P = MU ). Rather, the
monopolist is keeping its output a little in short supply. It does not produce up to the
point of P = MC because to do so would require lowering price to all consumers,
which would make the monopolist lose some profit. So, society does not get as
much of the monopolist’s output as it wants in terms of the good’s marginal cost
and marginal value to consumers. The losses in consumers' and producers' surpluses
due to monopoly power are known as the social cost or the Dead weight Losses
(DWL) of monopoly.
234
SELF-TEST QUESTIONS
1. The lower the value of the MR of a monopolist the higher will be the degree of its
monopoly power.
2. The lower the value of the price elasticity of demand for a monopolist product the
higher will be the markup.
3. We can derive the short run supply curve for a monopolist, provided that the
minimum AVC is known.
1. How many price discriminations are there under pure monopoly? What are they?
2. Does the difference in payment by spectators for the same movie or football match in
a stadium represent an example of price discrimination? Why or why not?
3. Why is that it is meaningless to ask what price will a monopolist charge for its
product?
4. What kind of economic and technological conditions are conducive to the emergence
of monopoly power?
5. Why a monopolist is better off with price discrimination than without? Under what
conditions is it feasible for a monopolist to practice price discrimination?
235
A. Determine the short run optimal output, price, and profit of this monopolist.
B. Calculate elasticity and mark up price at the equilibrium output and price.
C. Show your results in (A) and (B) graphically using the marginal approach.
D. Based on your graph in (C), do you think there is a room for entry into the
market in which this existing monopoly operates? Why or why not?
3. Advanced: Suppose a multi-monopolist has marginal cost functions
MC1 = 20 + 2q1 , and
MC 2 = 10 + 5q 2 .
Where, MC1 is the marginal cost of the first plant and MC 2 is the marginal cost of
the second plant. Besides, q1 and q 2 represent output to be produced using the first
and second plants, respectively. If the monopolist is minimizing its short run cost by
producing 5 units of output in the first plant, then:
A. How much units of output should the monopolist produce in the second plant in
order to meet the market demand for its product by minimizing the total cost of
production 6? Show the steps how you have determined q 2 .
B. Prepare a schedule similar to 6.3 for both marginal costs for 1 up to 10 output
levels and show how you can determine the total short run output of the
monopolist.
4. Assume that a monopolist has identified two markets such that the inverse demand
functions for its product in the two markets are:
P1 = 92 − 2q1 , and
P2 = 70 − q 2 .
6
Alternatively, question (11A) can be: What is the cost minimizing output of the monopolist in the second
plant?
236
C. Find the amount of profit the monopolists will earn with price discrimination.
What is total profit if the monopolist doe not discriminate between the two
markets?
D. Based on the profit figures you obtained in “C” above, are you then convinced
that a monopolist is always better off with price discrimination than without?
Why or why not?
E. In which market is the elasticity of demand higher? What is its implication?
F. Calculate the mark up at the short run equilibrium when the monopolist
discriminates. In which market is it higher? Why?
G. Show that a monopolist charges a price higher than its marginal cost in the
two markets.
5. Assuming that the monopolist in Question 4 above has evolved from perfect
competition to monopoly.
A. What is the restricted amount of output due to monopoly power?
B. Calculate the consumers’ and producers’ surplus under perfect competition
and monopoly.
C. What is the surplus transferred from consumers to the monopolist?
D. Calculate the net social cost (or Dead weight loss-DWL) due to monopoly
power or behavior.
E. Show first, the output and price levels under perfect competition graphically
and then shade or label with number (i) consumers’ and monopoly surplus; (ii)
surplus transferred to the monopolist; and (iii) the net DWL.
6. If the marginal cost functions of a monopolist were those given for the two plants in
Question 3, but if it faces the total market demand function in Question 4,
A. How much units of output should the multi-plant monopolist produce in the
two plants?
B. What will be the price the monopolist charges?
C. Calculate the multi-plant monopolist’s profit assuming that the fixed cost of
each plant is 30 Birr.
237
REFERENCES
) Dwivedi, D.N. (1997). Microeconomic Theory. 3rd ed. Vikas Publishing House Pvt
Ltd, New Delhi.
) Ferguson, C.E. and Gould J.P. (1989). Microeconomic Theory. 6th ed. Irwin
Publications.
) Henderson, M. and Quandt E. (1980). Microeconomic Theory: A Mathematical
Approach. 3rd edition. McGraw Hill.
) Koutsoyiannis, A. (1981). Modern Microeconomics. 2nd edition. St Martins Pr.
) Mansfield, E. (1988). Microeconomics: Theory and Applications. Shorter sixth
edition. W.W. Norton & Company: New York, London.
) Pindyck, R. S. and D.L. Rubinfeld (1991). Microeconomics. 8th ed. Macmillan.
) Salvatore, D. (2003). Microeconomics: Theory and Applications. 4th ed. Oxford
University Press, New York.
) Varian, Hal R. (2002). Intermediate Microeconomics: A Modern Approach. 6th ed.
W.W. Norton and Company.
238
ANSWERS TO SELECTED SELF-TEST QUESTIONS
239
UNIT FOUR Their values at *Without price
Part I equilibrium, MC*=9; discrimination:
1. b ATC*=6; AVC*=5. Π*=130.67
2. d (C) PS = 800; (F) Markup in market 1
3. b Q = 200 ± 100 3. = 20/17; markup in
4. a ⇒ Q ≈ 26.8; Q ≈ 373.2 market 2 = 69/68. It
5. d is higher in market 1
6. c UNIT SIX because consumers
7. d Part I in market 1 are less
8. b 1. True sensitive to price
9. d 2. True changes.
10. a 3. False 5. (A) output declines by
11. d Part III 1 unit (from 8 to
12. b 1. 7).
13. a 2. (A) Q*=10/27; P*=3; (B) *Under perfect
14. d Π* = 10/27 competition:
15. a (B) / ε / = 3; Markup
d
p CS=21.33; PS = 128
= 3/2 = 1.5 *Under monopoly:
UNIT FIVE 3. q2 = 4. CS = 16.33;
Part II 4. (A) *With price PS = 130.67.
1. (B) Q* = 25. discrimination: q1=6; (C) CS transferred to
(E) PS = ? p1=80; q2=1; p2=69. producer = 4.67.
(F) / ε pd / = ∞ *Without price (D) DWL = 2.33
discrimination: Q=7; 6. (A) q1=410/29=14.14;
2.
P = 72.67. q2 = 222/29 = 7.66
3. (A) Q*=200; Π*=600.
(B) *With price (B) P = 5464/87 = 62.8.
(B) MC=1+0.04Q;
discrimination: (C) Π = 602.68
ATC=(200/Q)+1+
0.02Q; and Π*=171
AVC = 1 + 0.02Q.
240