Professional Documents
Culture Documents
Electrical Inspection Checklist
Electrical Inspection Checklist
(Project C)
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
9.
10.
11.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECKLIST FOR DUCT BANK AND MANHOLES INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Check for warning tape above duct bank and red dye paint
3.
above duct bank concrete.
Inspect grounding for metallic cable support inside manhole
4.
including access ladder.
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECKLIST FOR CABLE TRAY INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR CABLE PULLING
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
9.
10.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LOW VOLTAGE CABLE TEST/PRE-COMMISSIONING
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
3.
4.
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR MEDIUM & HIGH VOLTAGE CABLE TEST/PRE-COMMISSIONING
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
4.
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR CABLE TERMINATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR CABLE BUS INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR CABLE BUS TEST/PRE-COMMISSIONING
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
4.
5.
6.
7.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LOW VOLTAGE PANEL BOARDS, DISCONNECT SWITCH &
SWITCHBOARD INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
5. Inspect for mechanical condition. (Exercise mechanical parts - Door, knife switch and breakers)
8.
9.
10.
11.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LOW VOLTAGE PANEL BOARDS, DISCONNECT SWITCH &
SWITCHBOARD INSTALLATION
(PP12 Project )
OLD
RFI No. Date
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
7.
8.
9.
10.
11.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LOW VOLTAGE PANEL BOARDS, DISCONNECT SWITCH &
SWITCHBOARD TEST/PRE-COMMISSIONING (600 Volts)
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LOW AND MEDIUM VOLTAGE CONTROLGEAR AND
SWITCHGEAR INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR GROUNDING INSTALLATION FOR MCC, SG DISTRIBUTION
PANELS AND RACKS
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Verify equipment grounding complies as per drawing or project
1.
technical specification.
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LOW AND MEDIUM VOLTAGE CONTROLGEAR AND
SWITCHGEAR TEST/PRE-COMMISSIONING
(PP12 Project )
Construction QA/QC
ITEM ACTIVITY Remarks
Clearance Clearance
3. Verify insulation resistance test on each bus bar & control wiring.
8. Verify insulation resistance test on each bus bar & control wiring.
9.
Note: Pre-commissioning test results form from third party or vendor shall be applied.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR ENERGIZATION/FUNCTIONAL TEST OF PANELBOARD,
LOW/MEDIUM VOLTAGE CONTOLGEAR & SWITCHGEAR
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
7.
8.
9.
Warning: Hazard voltages in electrical equipment can causse severe personal enquiry or death.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LIGHTING FIXTURE AND LUMINAIRE INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
7. Inspect photo cell's location as per drawing for outside lighting sys
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR LIGHTING SYSTEM TEST/PRE-COMMISSIONING
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
3.
4.
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR SMALL POWER AND CORD CONNECTED ELECTRICAL
EQUIPMENT INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
7.
8.
9.
10.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR ENERGIZATION/FUNCTIONAL TEST OF LIGHTING AND
SMALL POWER SYSTEM
(PP12 Project )
Construction QA/QC
ITEM ACTIVITY Remarks
Clearance Clearance
5.
6.
7.
8.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR BELOW GRADE GROUNDING CABLE LAYING AND ELECTRODE
INSTALLATION AND BONDING
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Verify grounding system is in compliance with drawings and
1.
project specifications.
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Verify lightning system is in compliance with drawings and
1.
project specifications.
Verify type, material, size and accessories/fittings as per project
2.
specifications.
3. Inspect connections/joints.
7.
8.
9.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR GROUND GRID EARTH RESISTANCE TEST
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
3.
4.
5.
6.
7.
8.
9.
10.
REMARKS/COMMENTS:
SIGNATURE :
SIGNATURE : SIGNATURE:
NAME :
NAME : NAME:
DATE :
DATE : DATE:
CHECK LIST FOR MOTOR (LV/MV) & GENERATOR GROUNDING INSTALLATION
(PP12 Project )
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
9.
10.
Note: Motors below 30KW can be connected to the ground through the earth conductors of the supply cable.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
4.
5.
6.
7.
8.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
5.
6.
7.
8.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
5.
6.
7.
8.
REMARKS/COMMENTS:
Construction QA/QC
ITEM ACTIVITY Remarks
Clearance Clearance
7.
8.
9.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
7.
8.
9.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
9.
10.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Verify test reports/results (insulation test, turns ratio test, winding
1.
resistance, initial current at no load,).
4.
5.
6.
7.
8.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Verify test reports/results (insulation test, turns ratio test, winding
1.
resistance, initial current at no load,).
4.
5.
6.
7.
8.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Compare equipment nameplate with drawings and project
1.
specifications.
9.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
4.
5.
6.
7.
8.
9.
10.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
Energization and functional testing shall be in accordance to
1.
vendor/manufacturer's procedure.
4.
5.
6.
7.
8.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
Construction
ITEM ACTIVITY QA/QC Clearance Remarks
Clearance
6.
7.
8.
9.
REMARKS/COMMENTS:
Construction QA/QC
ITEM ACTIVITY Remarks
Clearance Clearance
Verify installation as per drawing, project specification or vendor
1.
recommended installation procedures.
4.
5.
6.
7.
8.
9.
REMARKS/COMMENTS:
Construction QA/QC
ITEM ACTIVITY Remarks
Clearance Clearance
2.
3.
4.
5.
6.
7.
8.
9.
REMARKS/COMMENTS: