Professional Documents
Culture Documents
6640 MSDS
6640 MSDS
Product Name : SIP-SPLASH 640 BASE Product Code : 6640 Updated : SEPT 2008
Manufacturer’s Name : SAUDI INDUSTRIAL PAINT CO. LTD.
Trade Name : SIPCO
Address: P. O. Box 5795, Dammam 31432, Saudi Arabia Telephone : 8472299 Fax : 8473780
Epoxy Resin 15 - 30 NE NE NA
Silica 30 - 45 10 mg/m3 10 mg/m3 NA
NOTE : This product does not contain ingredients considered carcinogens or potential carcinogens by ACGIH, Federal OSHA,
NTP, IARC, or CAL/OSHA.
ABBREVIATIONS : C-CEILING LIMIT, D-NUISANCE PARTICLE TLV 10 MG/M3 TOTAL DUST, (C)-CARCINOGEN,
(PC)-POTENTIAL CARCINOGEN, DD-INERT OR NUISANCE DUST PEL 15 MG/M3 TOTAL DUST,
(1) NOT ESTABLISHED. USE STODDARD SOLVENT AS A GUIDE, (2) MM HG. [X] - HAZARDOUS
ACCORDING TO : a-SARA 302/304, b-SARA 313, c-CERCLA 103a
Unusual Fire and Keep container tightly closed, isolated from heat, electrical equipment spark and flame. Due to
Explosion Hazard pressure build-up, closed containers exposed to extreme heat may explode. Never use a welding or
cutting torch on or near container (even empty) as product or its residue may ignite. During
emergency conditions overexposure to decomposition products may cause a health hazard. Obtain
Medical attention.
First Aid Eyes : Flush immediately with large amounts of water. Get medical attention
Skin : Wash affected area with soap water. Remove soiled clothing. Get medical attention if irritation persists.
Inhalation : Leave the area to obtain fresh air. If continued difficulty in breathing persists get medical attention. If
breathing ceases restore using CPR techniques.
Ingestion : Consult a physician immediately. Do not induce vomiting.
Nature of Eyes : Causes irritation.
Hazard Skin : Causes irritation. May be harmful if absorbed through skin.
Inhalation : Irritation of respiratory tract, headache, nausea, dizziness. Extreme exposure can cause unconciousness
and even respiratory arrest.
Ingestion : Stomach / intestinal irritation nausea vomiting diarrhea.
Effects Acute Overexposure : Headache, nausea, dizziness, weakness & fatigue. Extreme exposure can cause unconciousness
and even respiratory arrest.
of Chronic : Reports have associated prolonged occupational overexposure to solvents with permanent brain nervous
system damage.
Overexposure
Overexposure : Prolonged breathing of spray mist or sanding dust over a period of years may cause dust disease of the
lungs.
ECOLOGY Keep out of all sewer & open bodies of water TOXICITY DATA NE
Hazardous Decomposition Products : May cause toxic fumes when heated to decomposition. Fumes may contain carbon monoxide.
Conditions contributing to Hazardous Polymerization : Polymerization will not occur.
Steps to be taken if Material : Remove all sources of ignition. (Flame hot surfaces & electrical static or frictional spark.)
is Released or Spilled. : Prevent breathing of vapor. Contain spilled material & remove with inert absorbent and non
sparking tools. Store in closed container until disposed.
Neutralizing Chemical : N.A. Waste Disposal Method : In accordance with local regulations.
Ventilation Requirements : Provide general dilution or local exhaust ventilation in volume and pattern to keep air contaminant concentration
below current applicable safety and health standards.
Respiratory Protection : Use dust / vapor mask.
Eye Protection : Do not get in eyes. Solvent resistant safety eyewear Protective Gloves : Do not get on skin, wear solvent impermeable
recommended. & Protective Wear gloves, clothing and boots.
Precautions in : Keep away from heat, spark, flame. Do not smoke. Prevent vapour build-up. Do not store above 120° F. Keep
Handling & Storage container closed when not in use. Do not re-use empty containers. Wash soiled clothing before re-use.
Information herein is given in good faith but no warranty, expressed or implied is made. Consult SIPCO for further information.
MATERIAL SAFETY DATA SHEET
Product Name : SIP-SPLASH 640 HARDENER Product Code : 6440 Updated : SEPT 2008
Manufacturer’s Name : SAUDI INDUSTRIAL PAINT CO. LTD.
Trade Name : SIPCO
Address: P. O. Box 5795, Dammam 31432, Saudi Arabia Telephone : 8472299 Fax : 8473780
Polyamide 35 - 50 NE NE NA
Silica 30 - 40 10mg/m3 10mg/m3 NA
NOTE : This product does not contain ingredients considered carcinogens or potential carcinogens by ACGIH, Federal OSHA,
NTP, IARC, or CAL/OSHA.
ABBREVIATIONS : C-CEILING LIMIT, D-NUISANCE PARTICLE TLV 10 MG/M3 TOTAL DUST, (C)-CARCINOGEN,
(PC)-POTENTIAL CARCINOGEN, DD-INERT OR NUISANCE DUST PEL 15 MG/M3 TOTAL DUST,
(1) NOT ESTABLISHED. USE STODDARD SOLVENT AS A GUIDE, (2) MM HG. [X] - HAZARDOUS
ACCORDING TO : a-SARA 302/304, b-SARA 313, c-CERCLA 103a
THIXOTROPIC
Appearance and Odor
Fire Extinguishing Media CO2 DryChemicals, Foam and other approved methods.
Special Fire Use full protective equipment including self contained breathing apparatus. If water is used fog
Fighting nozzles is preferable. If exposed to fire or heat water should be used to cool closed container and
Procedures prevent pressure build up or possible auto ignition. Summon professional firefighters.
Unusual Fire and Keep container tightly closed, isolated from heat, electrical equipment spark and flame. Due to
Explosion Hazard pressure build-up, closed containers exposed to extreme heat may explode. Never use a welding or
cutting torch on or near container (even empty) as product or its residue may ignite. During
emergency conditions overexposure to decomposition products may cause a health hazard. Obtain
Medical attention.
First Aid Eyes : Flush immediately with large amounts of water. Get medical attention
Skin : Wash affected area with soap water. Remove soiled clothing. Get medical attention if irritation persists.
Inhalation : Leave the area to obtain fresh air. If continued difficulty in breathing persists get medical attention. If
breathing ceases restore using CPR techniques.
Ingestion : Consult a physician immediately. Do not induce vomiting.
Nature of Eyes : Causes irritation.
Hazard Skin : Causes irritation. May be harmful if absorbed through skin.
Inhalation : Irritation of respiratory tract, headache, nausea, dizziness. Extreme exposure can cause unconciousness
and even respiratory arrest.
Ingestion : Stomach / intestinal irritation nausea vomiting diarrhea.
Effects Acute Overexposure : Headache, nausea, dizziness, weakness & fatigue. Extreme exposure can cause unconciousness
and even respiratory arrest.
of Chronic : Reports have associated prolonged occupational overexposure to solvents with permanent brain nervous
system damage.
Overexposure
Overexposure : Prolonged breathing of spray mist or sanding dust over a period of years may cause dust disease of the
lungs.
ECOLOGY Keep out of all sewer & open bodies of water TOXICITY DATA NE
Hazardous Decomposition Products : May cause toxic fumes when heated to decomposition. Fumes may contain carbon monoxide.
Conditions contributing to Hazardous Polymerization : Polymerization will not occur.
Steps to be taken if Material : Remove all sources of ignition. (Flame hot surfaces & electrical static or frictional spark.)
is Released or Spilled. : Prevent breathing of vapor. Contain spilled material & remove with inert absorbent and non
sparking tools. Store in closed container until disposed.
Neutralizing Chemical : N.A. Waste Disposal Method : In accordance with local regulations.
Ventilation Requirements : Provide general dilution or local exhaust ventilation in volume and pattern to keep air contaminant concentration
below current applicable safety and health standards.
Respiratory Protection : Use dust / vapor mask.
Eye Protection : Do not get in eyes. Solvent resistant safety eyewear Protective Gloves : Do not get on skin, wear solvent impermeable
recommended. & Protective Wear gloves, clothing and boots.
Precautions in : Keep away from heat, spark, flame. Do not smoke. Prevent vapour build-up. Do not store above 120° F. Keep
Handling & Storage container closed when not in use. Do not re-use empty containers. Wash soiled clothing before re-use.
Information herein is given in good faith but no warranty, expressed or implied is made. Consult SIPCO for further information.