EBRA
EBRA
EBRA
The world’s supply of fresh water is slowly running dry. Forty percent of
the world’s population is already reeling under today’s water crisis: an issue
of both scarcity and access. The growing water shortage will make food
scarcer, potable water less accessible and water-borne diseases even
more rampant. Currently, one in eight people do not have access to safe
drinking water; almost three times the population of the United States.
3.575 million people die each year from water borne illness, both caused
by lack of wastewater treatment and sanitation; the world’s largest cause
of infection. The number of people expected to suffer under these circum-
stances is predictedted to reach more than 500 million by the year 2025.
Over the past decade, the United States has been plagued by horrific
flooding and drought caused by less predicatable geographically interde-
pendent weather patterns and long periods of record high temperatures,
large snowfalls/melts and persistent rains. The severe swings in weather
conditions have been close together and drastic.
The variety of pump types and sizes produced by the EBARA Fluid Machinery
and Systems Group is tremendous, ranging from fractional horsepower
recirculation pumps to vertical mixed flow pumps with horsepower’s into
the thousands. EBARA’s engineering and manufacturing capabilities are
best demonstrated by the Futtsu manufacturing plant. The plant is focused
on the production of high pressure, large scale pumps and systems targeting
Overall view of the Futtsu Plant
specific applications in oil and gas, nuclear power, water and wastewater
infrastructure industries. EBARA’s Fujisawa plant is one of the most
technologically advanced manufacturing plants for the mass production of
small size pumps; including the D-series of cast iron pumps.
EBARA Fluid Handling (FHD), the US sales and service subsidiary, provides
engineered pump, pump products and related services for the water, waste-
water, commercial, municipal, energy and power industries offering reliable
product knowledge, application expertise and responsive support including
aftermarket replacement parts services.
4
With horsepower ranges up to 500 HP and capacities to 35,000 GPM,
EBARA FHD’s cast iron submersible pumps meet a wide range of industrial,
municipal, flood control, and residential water and wastewater applications.
The cast iron line of pumps includes submersible sewage, submersible
sump, semi-vortex, vortex, grinder, non-clog, and dry pit models.
EBARA service and parts are available through an extensive service network
throughout North America to assist customers in replacement of parts or
complete pumps and motors.
5
EBARA products: designed for performance.
Ebara Flow Head Discharge Maximum Type of
Model Description (GPM) (feet) HP Size (inches) Temp Pumpage
EPD, Optima
High quality stainless steel 3 to 86 9 to 61 1
/3 to 11/2 11/4 to 11/2 122°F / 50°C water, semi-
submersible sump and dirty water;
drainage pump solids to 3/8"
DWU, DWXU
water,
High quality stainless steel
8 to 235 8 to 74 1
/2 to 3 2 104°F / 40°C wastewater;
submersible sump and solids to 2"
effluent pump
DSU, DSHU
Durable cast iron submersible 8 to 390 8 to 126 1
/2 to 10 2, 3, 4 122°F / 50°C (hot) water,
sump, drainage pump up to wastewater,
176°F / 80° C treated sewage
(hot) water,
DVSU, DVSHU wastewater,
Durable cast iron submersible 7 to 250 10 to 80 1
/2 to 5 2, 3 122°F / 50°C abrasive,
pump with semi-vortex up to
suspended
impeller 176°F / 80° C solids to 21/4"
Page No.
Construction
Flood control
Commercial
Wastewater
Residential
Municipal
Industrial
Drainage
Irrigation
Transfer
Sewage
Effluent
Water
Sump
n n n n n n n n n 8
n n n n n n n n n n n 9
n n n n n n n n n 10
n n n n n n n n n 11
n n n n n n n n 12
n n n n n n n n n 13
n n n n n n n 14
n n n n n n n n n 16
n n n n n n n 17
n n n n n n n n n 18
n n n n n n n n n n 20
n n n n n n n n 24
7
Model EPD, Optima submersible stainless steel sump, drainage
Standard Specifications
Automatic Manual
Design Discharge 1
/3 HP - 11/4" 1/3 HP - 11/4"
1/2 HP and 3/4 HP - 11/2" 1/2 HP through 11/2 HP - 11/2"
Horsepower 1 1 3
/3, /2, and /4 HP 1/3, 1/2, 3/4, 1, and 11/2 HP
60
50
40
Head ( )
30
20
10
0
0 10 20 30 40 50 60 70 80 90 100
Flow (gpm)
8
Model DWU, DWXU submersible stainless steel sump, effluent
Standard Specifications
Automatic Manual
Design Discharge 2'' NPT or 2'' ANSI Flanged
Horsepower 1/2 HP to 11/2 HP 1
/2 HP to 3 HP
Capacity 8 to 180 GPM 8 to 235 GPM
Total head 8 to 54 feet 8 to 74 feet
Max. Liquid temp. 104°F (40°C)
Solids 2" Spherical
Speed 3600 RPM
Materials Casing 304L Stainless Steel
Features Impeller
Shaft
304L Stainless Steel
304L Stainless Steel
Constructed of high-quality, corrosion resistant 304 Motor Frame 304L Stainless Steel
stainless steel Fastener 304L Stainless Steel
Single and three phase models available Construction Mechanical Seal Double Mechanical Seal
Material – Upper Carbon/Ceramic/NBR
Motor is 2 pole submersible, rated continuous duty Material – Lower Silicon Carbide/Silicon Carbide/FPM
Class F motor insulation Impeller Type Single Channel/Vortex
104°F maximum fluid temperature continuous operation, Bearing Sealed Ball Bearing
Motor Air-filled, Insulation Class F
fully submerged; 140° F intermittent operation Single Phase 115 V (1/2, - 1HP) 115 V (1/2, 1HP), 230V
Automatic and manual operation 230V (1/2, - 11/2HP)
Auto float switch is mechanical/non-mercury Three Phase 230V or 460V
NPT thread discharge or 150 lb ANSI flange Motor Protection† Built-in Overload Protection (Single phase models)
Double mechanical seal with viton elastomers Submersible Cable 25 ft.
Consult factory for additional cable lengths.
Shielded, prelubricated ball bearings
Single channel and vortex impellers Accessories QDC System
Thermal overload protection Notes: * 2HP, 1-phase and 3HP, 3-phase units have a cast iron intermediate bracket.
QDC system available as an optional accessory
*Note: Model DW(A)(F)U, DWX(A)(F)U is listed by the Canadian
Standards Association (CSA) as certified (3HP excluded).
21.3 70 21.3 70
18.3 60 18.3 60
50D
50D WU6
15.3 50 WF 2.2
U6
2.2 3HP 15.2 50 50DW
3H 50DW XU62.2
TOTAL HEAD
hase ra
12.2 40 U6 2 H only tion)
50D 1.5 P 12.2 40 50DW
)
2 HP (ma
50D W(A)U nua 50DW XU61.5 2
WF X FU 6 H
(A)U61.1 1
l op
50D
era
tion 1.5 2 P (m
61.1 ½HP only HP anua
9.1 30 50D W(A)U 1½ ) 50DW l oper
ation
WF HP 50DW X(A)U61.1
(A)U6.75 1 9.1 30 only
)
XF(A
6.7 HP
5 1 )U61 1½HP
.1 1½
HP HP
50DW
6.1 20 50DW X(A )U
6.1 20 XF(A 6.75 1H
50DW(A)U6.4 ½HP )U6.7 P
5 1H
50DWF(A)U6.4 ½HP P
3.1 10
3.1 10
50DWX(A)U6.4 ½HP
50DWXF(A)U6.4 ½HP
0 0
0 50 100 150 200 250 US GPM 0 0
m3/min 0 25 50 75 100 125 150 175 200 225 US GPM
0 .19 .38 .56 .75 .95
m3/min
CAPACITY 0 .1 .19 .28 .38 .47 .56 .66 .75 .85
CAPACITY
9
Model DSU, DSHU submersible cast iron sump
Standard Specifications
DSU DSHU (Hot Water pumps)
Design Discharge 2, 3, 4 inch 2, 3 inch
Horsepower 3 to 10HP 1/2 to 5HP
40
50DSU/DSHU63.7 5HP 100DS
30 100 U67.5 1
0HP
50DSU/50DSHU62.2 3 HP 10
80 0D
50DSHU61.5 2HP SU
20 65
60 .5
7!
50DSHU6.75 1HP
80D
HP
15 50
SU
/80
Total Head
40
DS
HU
10 50DSHU6.4 !HP
63.
30
80D SHU62 P
75
80D
8
SU/
HP
6 20
3H
.2
5
15
4
3 10
8
6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 US GPM
.03 .04 .05 .06 .08 .10 .15 .20 .30 .40 .50 .80 1.0 1.5 m3/min.
Capacity
10
Model DVSU, DVSHU submersible cast iron semi-open vortex sewage
Standard Specifications
DVSU DVSHU (Hot Water pumps)
Design Discharge 3 inch 2, 3 inch
Horsepower 3 to 5HP 1/2 to 5HP
80 80DV
20 80DVSSHU63.7
60 50DVS U 5HP
HU61 80D
50 .5 2H
15 P VS
HU
50DVS 62.
80
40
Total Head
HU6.7 23
DV
10
5 1HP HP
S
80D
HU
30
80D
VS
U
61
8
VSH
.5
2H
20
U6.
6
P
50DVSHU6.4 1/2HP
75
5
15
1HP
10
3
Capacity
11
Model DWP, DWPM submersible dewatering
Standard Specifications
Standard construction Stainless Steel
Design Discharge 2, 3, 4, 6, 8 inch
Horsepower 1.3 to 58HP
Capacity 30 to 2000 GPM
Total head 5 to 34 feet
Max. Liquid temp. 104°F/40°C
Materials Inner casing
1.3 to 58 HP Epoxy coated aluminum 316 SS
58HP DWPM Cast iron 316 SS
Outer casing
1.3 to 10 HP Epoxy coated aluminum 316 SS
Features 16 to 58 HP Epoxy coated carbon steel 316 SS
Heavy duty motor 58HP DWPM Cast iron 316 SS
Shaft 431 SS
· Oversized shaft and bearings
Impeller
· Available in most voltage / frequency combination Open mixed flow 410 SS (optional 316SS)
· 2- pole squirrel cage induction type continuous rated, Class H insulation Diffuser/Wearplate Nitrile rubber coated
· Maximum 15 starts per hour Strainer 304 SS 316 SS
Tandem UPPER & LOWER mechanical seals operate enclosed in a Impeller nut 410 SS
pressure compensated oil chamber Mechanical Seal Tandem Mechanical Seal
Unique SAND GUARD seal housing prevents sand/debris from Material – Upper Tungsten Carbide/ Upper seal is lip seal only,
collecting on outer seal face during pump operation Tungsten Carbide for 1.3 - 2 HP models
Standard sacrificial zinc anodes provide protection from galvanic corrosion Material – Lower Tungsten Carbide/
Cable sealing system seals power cord AND individual leads in the Tungsten Carbide
gland assembly Bearing
SS impeller, shaft, strainer, hardware and outlet for maximum corrosion Upper Single row deep groove with high temperature grease
containing special anti-corrosion additive
resistance Lower
Standard impeller is nitride hardened 410 stainless steel to 56HRC; 1.3 to 10 HP Single row deep groove with high temperature grease
optional 316SS impeller available containing special anti-corrosion additive
Field adjustable rubber lined diffuser and wear plates provide for 16 to 58 HP Double angular contact lower bearings; enclosed with high
optimum pump efficiency temperature grease containing special anti-corrosion additive
Disch.
DWP, DWPM selection chart / Dimensions Curve Model NPT T U
350 A 50DWP 1.3HP 2 12-1/4 6-1/4
B 50DWPM 1.5HP 2 12-1/4 6-1/4
325 C 50DWP 2HP 2 13-1/2 6-1/4
300
D 50DWPM 2HP 2 13-1/2 6-1/4
E 80DWP 3HP 3 26-1/4 7-1/2
275 F 80DWP 5HP 3 28-1/2 7-1/2
T G 80DWPM 5HP* 3 28-1/2 10-3/4
250
H 100DWP 7.5HP 4 28-1/2 10-3/4
225 I 80DWPM 10HP* 3 29-1/2 10-3/4
J 100DWP 10HP 4 29-1/2 10-3/4
200
K K 100DWPM 16HP 4 33-1/4 14-1/4
Head (ft)
M
175 L 150DWP 16HP 6 33-1/4 14-1/4
I R
M 100DWPM 25HP 4 36 15-3/4
150 O N 150DWP 25HP 6 36 15-3/4
G U
125 O 150DWPM 35HP 6 40-1/2 15-3/4
P 200DWP 35HP 8 40-1/2 15-3/4
100 R 150DWPM 58HP 6 41-1/2 17-1/8
75
S 200DWP 58HP 8 41-1/2 15-3/4
N S * 2-stage pumps
B
D 50 P
A F J L
25
E H
C
0
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Flow (gpm)
12
Model DMLEU submersible single channel sewage
Standard Specifications
Design Discharge 3, 4, 6 inch
Horsepower 3 to 30HP
Capacity 55 to 1345 GPM
Total head 12 to 136 feet
Max. Liquid temp. 104°F/40°C
Speed 1800 RPM
Materials Casing Cast Iron
Impeller Cast Iron
Shaft 403 Stainless Steel
Features Motor Frame
Fastener
Cast Iron
304 Stainless Steel
Economical alternative – commercial/industrial use
Construction Mechanical Seal
Non-clog, single channel impeller has 3'' spherical passage; prevents
Double Mechanical Seal
clogging; high efficiency and saves energy
Material – Upper Carbon/Ceramic
Robust construction – large diameter, short overhang shaft with Material – Lower Silicon Carbide/Silicon Carbide
stainless steel fasteners Impeller Type Non-clog single channel enclosed
Air-filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, Bearing Prelubricated Ball Bearing
dissipates heat easily, operates cooler with higher efficiencies; longer Motor Air-filled, dry submersible, Class F Insulation
service life with lower operating costs Three Phase 208/230V, 460V
Built in motor protection autocut protects motor against overheat, Service Factor 1.15
out of phase, single phasing, and no load; saves money on costly Motor Protection Built-in Auto cut (3HP model)
motor replacement Thermal Detector – Klixons
60,000 hour bearings ensure long dependable operation; lower Mechanical seal leak detector – internal oil probe
maintenance costs
Double mechanical seals – silicon carbide lower seals, carbon/ceramic Submersible Cable 33 ft. standard cable length, Optional 66 ft.
upper - hard faced upper and lower seals operate in an oil bath; providing
Accessories Optional QDC System
longer service life and lower maintenance costs
Available for slide rail installations provides ease of maintenance for
small sump type installations
80DMLE65.5 100DMLE611
Total Head
50
ML
E6
15
22
0D
100
40 DM
ML
LE6
E6
80DMLE63.7 7.5
15
10 100D
15
9 30 MLE
0D
65.5
ML
8
E6
150
7
11
DM
6 20
LE6
150
80DMLE62.2 100DMLE63.7
7.5
DM
5
LE6
5.5
4
3 10
2
50 100 200 300 400 500 600 800 1000 1400 2000 USGPM
Standard Specifications
EFQT EFQU
Design Discharge 2 to 12 inch 3 to 6 inch
125# R.F. ANSI 125# R.F. ANSI
Horsepower 1 to 125 HP 11/2 to 75HP
Performance Capacity to 3400 GPM to 1500 GPM
Total head to 130 feet to 210 feet
Maximum Solid Diameter 3 inch 1.25 inch
Speed 650 to 2150 RPM
Standard Materials
Casing Cast Iron A48 CL 30
Features Impeller
Wear Plate
Ductile iron A 60-40-18
Carbon Steel SAE 1020
Large solids handling capabilities prevents clogging – 3" solids ( EFQT), Cover Plate Cast Iron A48 CL 30
1.25" solids (EFQU) Shaft Alloy Steel 4140
Easy maintenance – Removeable cover plates and rotating elements Bearing Housing Cast Iron A48 CL 30
Flap Valve Reinforced Neoprene
for quick inspection and cleaning of the pump without having to Seal Sleeve 316 Stainless Steel
remove it from the piping Flanges Cast Iron A48 CL 30
Backside pump-out vanes reduce pressure on the seal and exclude O-rings Buna
solids from the seal area Mechanical Seal Silicon Carbide/Silicon Carbide, Viton, 316 Stainless Steel
External shimless wear plate adjustment Options Tungsten Carbide Seals
Base-plate mounting, coupling guards
Multivane, semi-open, high efficiency impellers
Horizontal V -belt
Robust cast iron casing with ductile iron impeller standard. Vertical V- belt
Cartridge seals with Silicon Carbide/Silicon Carbide faces; design Flex coupled
allows for quick replacement and ease of installation TEFC or OPD motors
Diesel Engine operation, trailer or skid mounted
EFQU series pumps are dimensionally interchangeable with the
NPT Threaded suction and discharge connections
EFQT series pumps in the 3", 4" & 6" sizes
*Note: Alternate construction materials avialable on request including 304ss, 316ss and CD4 MCU
Diesel engine operation, trailer or skid mounted
61 200
36 120
53 175
30 100
46 150
23 75
12 40
15 50
6 20
8 25
0 0 0 0
0 500 1000 1500 2000 2500 3000 3500 USGPM 0 300 600 900 1200 1500 1800 USGPM
14
FlexCoupled self-priming trash pump
EBARA
Flex Coupled Control Panel
ControlPanel Di h
Discharge
AtmosphericPressure
Datum
Vent
High
Level
Alarm
4
Inlet Lag
Pump
On
3
Lead
P
Pump 2
On
Pump 1
Minimum Off
g
Submergence
Flare
OffBottomDistance
VerticalVͲBelt EBARA
Vertical V-Belt Control Panel
ControlPanel Di h
Discharge
AtmosphericPressure
Datum
Vent
High
Level
Alarm
4
Inlet Lag
Pump
On
3
Lead
P
Pump 2
On
Pump 1
Minimum Off
Submergence
g
Flare
OffBottomDistance
HorizontalVͲBelt EBARA
Horizontal V-Belt Control Panel
ControlPanel Discharge
i h
AtmosphericPressure
Datum
SpoolPiece
EasesCleanout
l
Maintenance
Vent
High
Level
Alarm
4
Inlet Lag
Pump
On
3
Lead
P
Pump 2
On
Pump 1
Minimum Off
Submergence
g
Flare
OffBottomDistance
15
Model DGUII, DGFU submersible grinder
Standard Specifications
DGUII DGFU
Design Discharge 11/4 inch 11/4, 2 inch
Horsepower 2HP (single phase) 2 to 5HP
Capacity 5 to 30 GPM 5 to 80 GPM
Total head 27 to 112 feet 27 to 148 feet
Max. Liquid temp. 104°F/40°C
Speed 3600 RPM
Materials Casing Cast Iron
Impeller Cast Iron
Grinder Impeller High Chrome Cast Iron HRC 60
Features Grinder Disk
Shaft
High Chrome Cast Iron HRC 60
403 Stainless Steel
Heavy-duty high chrome iron grinder system – powerful blades Motor Frame Cast Iron
reduce solids size for smooth, non-clogging flow Fastener 304 Stainless Steel
Reversible grinder ring provides longer service life and less Construction Mechanical Seal Double Mechanical Seal
maintenance Material – Upper Carbon/Ceramic
Air-filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, Material – Lower Silicon Carbide/Silicon Carbide
dissipates heat easily, operates cooler with higher efficiencies; longer Impeller Type Semi-open vortex
service life with lower operating costs Bearing
Built-in motor protection; (DGUII models) protects motor against over- Upper/Lower Prelubricated Ball Bearing
heating, out-of-phase, single phasing, and no load; (DGFU models) Motor Air-filled, Insulation Class F Insulation Class F
provide overtemp and seal fail protection; saving money on costly Optional: FM Explosion Proof
motor replacement Class 1, Division 1, Group C, D
60,000 hour bearings ensures long dependable operation; lower Single Phase 208/230V
maintenance costs Three Phase 208/230V/460V
Semi-open vortex type recessed impeller; vortex action prevents Motor Protection Built-in Auto Cut - overload Built-in Thermal Detector - Klixon
clogging and handles stringy material better vs moving pumpage no load, out of phase, and Built-in Mechanical Seal Leakage
through impeller vanes; provides durability, high reliability, and lowers single phasing protection
maintenance costs Submersible Cable 33 ft. standard cable length, Optional 66 ft.
Double mechanical seals – upper and lower seals operate in an oil
bath; providing longer service life and lower maintenance costs Accessories Optional QDC System
Small and light weight portability; easy to transport for temporary
installations
140
40
120
50DGFU63.7 5HP
30 100
Total Head
80
20
60 30DGFU61.5 2HP 50DGFU62.2 3HP
32DGUII61.5 2HP
40
10
20
0
0 10 20 30 40 50 60 70 80 90 USGPM
l/min.
0 100 200 300
Capacity
16
Model DLU submersible sewage
Standard Specifications
Design Discharge 2, 3, 4 inch
Horsepower 1 to 5HP, Single Phase
1 to 2 HP, Three Phase
Capacity 13 to 430 GPM
Total head 9 to 66 feet
Max. Liquid temp. 104°F/40°C
Speed 1800 RPM
Materials Casing Cast Iron
Impeller Cast Iron
Feature Shaft
Motor Frame
403 Stainless Steel
Cast Iron
Air-filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, Fastener 304 Stainless Steel
dissipates heat easily, operates cooler with higher efficiencies; longer Construction Mechanical Seal
service life with lower operating costs Double Mechanical Seal
Built-in motor protection with autocut protects motor against overheat, Material – Upper Carbon/Ceramic
out of phase, single phasing, and no load; saves money on costly Material – Lower Silicon Carbide/Silicon Carbide
motor replacement Impeller Type Semi-open
60,000 hour bearings – long dependable operation with lower main- Bearing Prelubricated Ball Bearing
tenance costs Motor Air-filled, Insulation
Class F
Large solids handling capabilities prevents clogging
Single Phase 208/230V
Semi-open impellers; offer the best design for handling stringy and/or
Three Phase 208/230V, 460V
abrasive materials better due to large wear area and open passageways,
Service Factor 1.15
providing durability and longer life Motor Protection Built-in Auto cut - overload, out of phase,
Double mechanical seals – silicon carbide lower seals, carbon/ceramic single phasing protection
upper - hard faced upper and lower seals operate in an oil bath; providing
longer service life and lower maintenance costs Submersible Cable 33 ft. standard cable length, Optional 66 ft.
Available for slide rail installations provides ease of maintenance for
Accessories Optional QDC System
small sump type installations
8 0D
2 1 LU
63
.7S
6 20 50DLU6.75 1HP 10 5H
0D
LU P
5 62
.2S
15 3H
4 100DLU61.5 2HP P
10
3 10 15 20 30 40 50 60 80 100 150 200 300 400 500 US GPM
m 3/min.
0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.5 2.0
Capacity
1 80DLU62.2S 3HP
2 80DLMU61.5 2HP
3 80DLMU62.2S 3HP
17
Model DVU, DVFU
Standard Specifications, DVU
Design Discharge 2, 3, 4 inch
Horsepower 1 to 5HP, Single Phase
Features
1 to 2 HP, Three Phase
Air-filled, heavy duty motor, rated for 20 starts/hour,
Capacity 16 to 430 GPM dissipates heat easily, operates cooler with higher
Total head 10 to 50 feet efficiencies; longer service life with lower
Max. Liquid temp. 104°F/40°C operating costs
Speed 1800 RPM Built-in motor protection with autocut, protects
motor against overheating, single phasing, and
Materials Casing Cast Iron
no load; saves money on costly motor replacement
Impeller Cast Iron
Molded watertight cable prevents capillary
Shaft 403 Stainless Steel
action; reduces maintenance costs
Motor Frame Cast Iron
60,000 hour bearings; ensures long, dependable
Fastener 304 Stainless Steel
operation and lowers maintenance costs
Construction Mechanical Seal
Large solids handling capabilities prevents
Double Mechanical Seal clogging
Material – Upper Carbon/Ceramic
Semi-open vortex type recessed impeller; multi-vane vortex design
Material – Lower Silicon Carbide/Silicon Carbide handles stringy material better and prevents clogging providing high
Impeller Type Semi-open Recessed Vortex reliability, durability and lower maintenance costs
Bearing Prelubricated Ball Bearing
Stainless steel shaft – high tensile strength and corrosion resistance
Motor Air-filled, Insulation
Double mechanical seals-silicon carbide lower seals, carbon/ceramic
Class F (DVU); Class H (DVFU)
upper - hard faced upper and lower seals operate in an oil bath;
Single Phase 208/230V
providing longer service life and lower maintenance costs
Three Phase 208/230V, 460V
High wire to water efficiencies reduced power consumption; reduced
Service Factor 1.15 cost of operation
Motor Protection Built-in Auto cut - overload, no load, out of phase,
Available for slide rail installations provides ease of maintenance for
single phasing protection
small sump type installations
Submersible Cable 33 ft. standard cable length, Optional 66 ft. Three phase, FM explosion proof, Class 1, Div. 1, Group C & D
available in DVFMU series 2 HP and above
Accessories Optional QDC System
40 80DVC
50DVU62.2S 3HP U63.7S
5HP
10
30 80DVC 80DVB
U62.2S U63.7S
50DVU61.5 2HP 3HP 5HP
8
80D
Total Head
80DVU VB 100
20 61.5 2 U6
6 HP 2.2 DV
S U 63.
50DVU6.75 1HP 3H 7S
5 P 5H
15 P
4
10
3
8 USGPM
15 20 30 40 60 80 100 150 200 300 400 600
m 3/min.
.06 .08 0.1 .015 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.5 2.0
Capacity
18
submersible vortex sewage
6 7
8
80DVCFU611 15HP
80DVBFU611 15HP 14
80DVFU67.5 10HP 15
13
5 12
50DVFU62.2 3HP 4 16
11
2
3 10 17
50DVFU61.5 2HP
9
1
80DVFU61.5 2HP
costs
Self cooling jacket (Model DDLFU) eliminates the
need for external pumping devices or special heat
Replaceable wear components maintains working
clearances while reducing casing and volute costs
22
submersible sewage, wet/dry pit model
Primary seal – grommet (NBR) Cable gland
(grey cast iron)
Secondary sealing – O-rings (NBR)
Epoxy resin –
Solid joint butt connector
prevents capillary action (copper)
Note: Entry system is the same for both power and control cables.
23
Model DSC4, DSCA4, DSC
Standard Specifications
Design Discharge 6 to 24 inch
Horsepower 50 to 500
Capacity 530 to 35000 GPM
Total head 23 to 300 feet
Max. Liquid temp. 104°F/40°C
Materials Casing Cast Iron
Impeller Cast Iron
Casing Ring 420 Stainless Steel (enclosed Impeller models)
Shaft 420 Stainless Steel
Motor Frame Cast Iron
Cooling Jacket Steel
Fastener 304 Stainless Steel
Construction Impeller Type Semi-open
Enclosed
Optional: Impeller Ring (enclosed impeller models)
Shaft Seal Cartridge type duplex mechanical seals in
tandem arrangement
Material – Upper Carbon/Ceramic
Material – Lower Silicon Carbide/Silicon Carbide
Optional materials available, consult factory.
Bearing Grease Lubricated Ball Bearing
Motor Class H insulation
Air filled water tight with cooling jacket
15 starts/hour, 1.15 Service Factor
Optional: FM explosion proof, Class 1, Group C, D
Built-in winding temperature detector
Built-in float type leak detector
Optional: Temperature detector for thrust bearing
Mounting method Wet Pit: Quick discharge connector (QDC)
Dry Pit: with baseplate (DSCA4)
Accessories 50 ft (15.24 m) water tight rubber insulated
flexible cable
Optional cable lengths available, consult factory.
100
EO-66100 Cable housing
(gray cast iron)
AO-46075 Grommet
Cable clamp bolt
50 AO-46060 (304SS)
(NBR)
AO-46050
40
GO-66075
Washer
10 FO-66060 (304SS)
30
FO-66050
Gland bolt
O rings
20 (304SS) (NBR)
5
Butt connector
(copper)
1 5 10 50 (m3/min) Epoxy resin
compound
0.5 1 1. 5 2 3 4 5 10 15 ×10 3 (prevents Cable gland
(USGPM) (gray cast iron)
CAPACITY capillary action)
24
large submersible sewage, wastewater wet/dry pit model
Upper seal
Oil Chamber
Pumpage
Impeller
Upper seal O rings – NBR
Upper seal faces – Carbon vs Ceramic
Leak Detection Area
Lower seal O rings – Viton
Lower seal faces – Silicon carbide vs Silicon carbide
Seal springs – 304SS Seal leak
Shaft sleeve – 304SS path
Optional seal face materials available
Float Switch
Mechanical
seal oil
10 3
3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 150 m 3/m
0.6 0.7 0.8 0.6 1.0 1.5 2 3 4 5 6 7 8 9 10 15 20 25 30 40,000 USGPM
CAPACITY
25
Accessories
EBARA Fluid Handling provides complete solutions for a wide range of applications across
various industries and offers additional accessories from control panels to drives, basin
packages, lifting chains, adapters, guide brackets, hoists and hatch covers for water and
waste water treatment submittal and bid packages.
Control Panels
Features Applications
· Basic, standard or custom · Industrial/Municipal
· All Nema rated enclosures; Components are UL Listed · Water
· IEC or Nema starters · Wastewater
· Separate alarm and control circuits
· Build to engineers’ or customer specifications
· Build to customer specifications
EngineeredforPerformance