Cao 100.7 PDF
Cao 100.7 PDF
7 (as amended)
made under regulation 5 and subregulation 235 (1) of the Civil Aviation Regulations 1988.
This compilation was prepared on 21 December 2007 taking into account amendments up to
Civil Aviation Order 100.7 Amendment Order (No. 2) 2007.
Prepared by the Legislative Drafting Branch, Legal Services Group, Civil Aviation Safety
Authority, Canberra.
Contents
Section 100.7 (Administration and procedure — weight control of
aircraft)
Page
1 Application 1
2 Definitions and abbreviations 1
3 Weighing intervals 2
3A Use of fleet weight and CG values 4
3B Weighing aeroplanes to establish fleet (weight and CG) values 5
4 Weighing procedure 6
5 Loading data 6
6 Record of weight alterations 7
7 Current empty weight 8
Note to Civil Aviation Order 100.7 8
Section 100.7
1 Application
In this Order, aircraft does not include a balloon.
Note The weighing of balloons is dealt with under Civil Aviation Order 100.96.
fleet (weight and CG) values means the average operating weight and average CG
established for the aircraft in a fleet.
load data sheet means a document prepared in respect of an individual aircraft to
provide weight and centre of gravity information for use in the loading system.
loading system means a system for ensuring that an aircraft is loaded within approved
weight and centre of gravity limits at all times during flight.
maximum landing weight means the maximum aircraft weight as set out in the flight
manual or a type certificate data sheet at which the aircraft may land under normal
circumstances.
max T.O.W. means the maximum take-off weight of an aircraft.
operating weight, in relation to a particular type of operation of an aircraft, means the
empty weight of the aircraft plus those items of removable equipment and disposable
load which remain constant for the type of operation being conducted.
Regulations means the Civil Aviation Regulations 1988.
removable equipment means items of equipment which are carried on some or all
operations of an aircraft but which are not included in its empty weight.
validation, in relation to an aircraft’s weight, means the determination of the aircraft’s
weight in accordance with paragraph 3.5.
weight control means the determination of the empty weight and empty weight centre
of gravity position of an aircraft, the development and approval of loading data, the
keeping of a record of weight alterations and the overall supervision of these activities
and, to the extent necessary, oversight of the control, maintenance and operation of the
aircraft, in such a way as to ensure that at all times the provisions of the Regulations in
respect of loading, weight and centre of gravity of the aircraft can be complied with.
weight control officer means a person holding an airworthiness authority issued under
paragraph 33B (1) (e) of the Regulations.
3 Weighing intervals
3.1 Initial Weighing
(1) Except as specified in subparagraph (2) of this paragraph, all aeroplanes, gliders
and rotorcraft shall be weighed prior to the initial issue of a certificate of
airworthiness.
(2) The weighing of an aircraft, other than a prototype aircraft, prior to the initial
issue of a certificate of airworthiness is not required if the empty weight and
empty weight centre of gravity position have been established to the satisfaction
of a weight control officer.
(3) CASA may require an aircraft to be weighed or reweighed, as applicable, if
reasonable doubt exists as to the accuracy of the weight and balance data
submitted in respect of that aircraft.
3.2 Subject to paragraph 3.2.1, if:
(a) the weight of an aircraft of a type referred to in column 2 of items 1 to 4
(inclusive) of the following table has been determined under paragraph 3.1; and
(b) the aircraft is used in commercial operations;
the aircraft must:
(c) in the case of an aircraft of a type referred to in column 2 of items 1 and 2 — be
reweighed at the intervals set out in column 3 of the item; and
2
Federal Register of Legislative Instruments F2008C00038
Civil Aviation Order 100.7
3
Federal Register of Legislative Instruments F2008C00038
Civil Aviation Order 100.7
4
Federal Register of Legislative Instruments F2008C00038
Civil Aviation Order 100.7
3A.6 An operator may include in a fleet an aeroplane whose actual CG exceeds the
maximum permitted variation under subparagraph 3A.5 (b), but only if it is operated
with its individual CG.
3A.7 An operator may include in a fleet an aeroplane that has, compared to other aeroplanes
in the fleet, a physical, accurately accountable difference that causes it to exceed the
maximum permitted variations under paragraph 3A.5.
3A.8 An operator who includes in a fleet an aeroplane to which paragraph 3A.7 applies
must make appropriate corrections when calculating the weight, CG, or both, of that
aeroplane, to take account of the difference referred to in that paragraph.
3A.9 If an operator omits an aeroplane from a fleet and does not include it in another fleet
in accordance with this subsection, the operator must:
(a) operate that aeroplane with its individual operating weight and CG; and
(b) reweigh that aeroplane in accordance with paragraph 3.2.
3A.10 An operator may have more than 1 fleet, with different fleet (weight and CG) values,
for aeroplanes of the same model and configuration.
3A.11 An operator must only include in a fleet aeroplanes for which a mean aerodynamic
chord has been published.
3B Weighing aeroplanes to establish fleet (weight and CG) values
3B.1 An operator must re-establish fleet (weight and CG) values for aeroplanes in a fleet at
least every 4 years.
3B.2 To re-establish fleet (weight and CG) values, an operator must in the previous 4 years
have weighed, on a sample basis, not less than the applicable number of aeroplanes
determined in accordance with the following table:
Number of aeroplanes Minimum number to be weighed
in fleet
2 2
3 3
4 or 5 4
6 or 7 5
8-13 6
14-23 7
More than 23 6, + 10% of the number of aeroplanes
over 9, rounded up, in the case of a
decimal point, to the next whole
number
3B.3 An operator must re-establish the fleet (weight and CG) values by using the weights
and CG of those aeroplanes that have been weighed in accordance with paragraph
3B.2.
3B.4 An operator must ensure that the aeroplanes that have not been weighed for the
longest time are selected when the weighing of aircraft in a fleet is undertaken for the
purposes of paragraphs 3B.1 and 3B.2.
3B.5 Each aeroplane in a fleet must be weighed at least once every 9 years.
5
Federal Register of Legislative Instruments F2008C00038
Civil Aviation Order 100.7
4 Weighing procedure
4.1 Aircraft weighings shall be carried out under the control of a weight control officer
whose appointment covers the activity.
Note Subject to compliance with paragraphs 4.1 and 4.7, a person other than a weight control officer
may carry out the weighing of an aircraft.
4.2 Aircraft must be weighed on scales that:
(a) have an accuracy over the temperature range for which the scales are designed of:
(i) ±0.2% of the applied load; or
(ii) ±2 kg;
whichever is the greater; and
(b) are of a type approved for the purpose by an airworthiness officer.
4.3 Unless otherwise approved by an airworthiness officer, each scale shall have been
calibrated either by the manufacturer or by a State Weights and Measures Authority
within a period of 1 year prior to weighing any aircraft.
4.4 Sufficient personnel and equipment, including scales, shall be provided to
satisfactorily carry out the weighing.
4.5 The empty weight and empty weight centre of gravity position shall be determined
from the results of 2 consecutive and independent weighings. The load shall be
completely removed from the scales between each weighing.
4.6 If the difference between the first 2 weighings exceeds 0.2% of the mean weight or
10 kg whichever is the greater, further weighings shall be performed until the results
of 2 consecutive and independent weighings agree within that tolerance.
4.7 The empty weight and empty weight centre of gravity position shall be certified as
correct by a weight control officer whose appointment covers the activity. Weighing
details and the determination of the empty weight and empty weight centre of gravity
position shall be entered in an aircraft weighing summary approved by CASA.
4.8 A list of equipment included in the empty weight shall be prepared for each aeroplane
and rotorcraft.
5 Loading data
5.1 In those cases where loading data prepared in accordance with this section is approved
by CASA, that data shall be deemed to be directions under regulation 235 of the
Regulations with respect to the method of loading of persons and goods (including
fuel) on aircraft.
5.2 Preparation and Approval of Loading Data
(1) A load data sheet shall be prepared for each aeroplane and rotorcraft specifying
the empty weight and empty weight centre of gravity position. In addition, if an
operating weight is used, the operating weight and operating weight centre of
gravity position shall also be specified on the load data sheet and a list of
removable equipment and disposable load included in that operating weight shall
be prepared. If the aircraft will require re-weighing or will need to have its weight
validated under paragraph 3.2, the load data sheet must include the date of the
third anniversary of the last re-weighing or validation of the aircraft.
(2) A loading system shall be prepared for each aeroplane, glider and rotorcraft
unless it can be shown that the aircraft cannot be loaded in such a manner that the
weight and centre of gravity falls outside the approved range while observing all
compartment and seating limitations.
6
Federal Register of Legislative Instruments F2008C00038
Civil Aviation Order 100.7
(2A) The loading system for an aircraft with a max T.O.W. of 5 700 kg or less may be
set out on placards placed at appropriate places on the aircraft if the information
relating to the loading system can be readily set out in placard form.
(3) Loading data prepared in accordance with the provisions of this subsection may
be approved by a weight control officer whose appointment covers the activity.
Where a flight manual page is used as the load data sheet or to specify any
required loading system, 2 copies of the same shall be submitted to CASA.
Note Such flight manual pages will be issued by CASA as a flight manual amendment.
(4) An aircraft’s loading data must be stated in kilograms except in the case where
the aircraft’s flight manual gives the relevant information in relation to the
aircraft in pounds and in such a case the loading data may be stated in pounds.
(5) The owner or operator shall keep in a safe place on the ground duplicate copies of
all current approved loading data applicable to his aircraft.
6 Record of weight alterations
6.1 A complete, current and continuous record of changes in empty weight and empty
weight centre of gravity position and, where appropriate, operating weight and
operating weight centre of gravity position, shall be maintained for each aeroplane and
rotorcraft and this record shall contain details of all alterations affecting the weight
and balance of the aircraft.
6.1A If changes to an aircraft’s empty weight or operating weight occur due to changes in
the aircraft’s equipment, the aircraft’s equipment list must be amended in accordance
with the equipment changes.
6.2 A new record of weight alterations shall be raised after each weighing.
6.3 Unless otherwise agreed to by CASA, the load data sheet for an aeroplane or
rotorcraft shall be renewed before further flight whenever, as the result of a
modification or as otherwise shown in the record of weight alterations, changes
exceeding the following have occurred:
(a) for aeroplanes:
(i) the empty weight has changed by more than 0.5% of the max. T.O.W. or
10 kg, whichever is the greater; or
(ii) the empty weight centre of gravity position has changed by more than 2% of
the maximum permissible centre of gravity range or 5 mm, whichever is the
greater; and
(b) for rotorcraft:
(i) the empty weight has changed by more than 1% of the max. T.O.W. or
10 kg, whichever is the greater; or
(ii) the empty weight centre of gravity position has changed by more than
10 mm or 10% of the maximum permissible centre of gravity range
whichever is the less.
6.4 Whenever, under the circumstances described in paragraph 6.3 of this section, a load
data sheet is renewed the need for the corresponding introduction of a loading system,
or loading system revision, shall be determined in accordance with the provisions of
subparagraph 5.2 (3) of this section.
6.5 Further to the provisions of paragraph 6.1 of this section, if CASA considers that
adequate weight control has not been exercised over an aircraft, CASA may require
that the aircraft be weighed or reweighed, as applicable, and a new empty weight and
empty weight centre of gravity position determined.
7
Federal Register of Legislative Instruments F2008C00038
Civil Aviation Order 100.7
6.6 A glider shall be weighed or reweighed, as applicable, when, in the opinion of CASA
or an authorised person in the Gliding Federation of Australia, such a weighing is
necessary. In that case, a new empty weight and empty weight centre of gravity shall
be established and the need for the corresponding introduction of a loading system, or
loading system revision, shall be determined in accordance with the provisions of
subparagraph 5.2 (2) of this section.
6.7 Loading data renewed in accordance with this section shall be based on the new empty
weight and empty weight centre of gravity position and shall be prepared and
approved in accordance with subparagraph 5.2 (3) of this section.
7 Current empty weight
7.1 For the purposes of a direction under subregulation 235 (1) of the Regulations setting
out the method of estimating with respect to an aircraft at any time the relevant weight
and centre of gravity position, the applicable empty weight and empty weight centre
of gravity position shall be the empty weight and empty weight centre of gravity
position most recently determined and specified in a load data sheet for the aircraft, in
accordance with this or previous issues of this section.
Note CASA publication ‘Weight Control of Aircraft’ provides guidance on acceptable weight control
methods.
Table of Orders
Table of Amendments
ad. = added or inserted am. = amended rep. = repealed rs. = repealed and substituted
8
Federal Register of Legislative Instruments F2008C00038