Professional Documents
Culture Documents
VILAS - The Fresh Connection Manual PDF
VILAS - The Fresh Connection Manual PDF
Executive (SCE) courses designed and organized based on the cooperation between Vietnam
Logistics and Aviation School (VILAS) and Inchainge B. V. (The Netherlands). The model is
considered as a critical factor that offers participants the experiences on actual tasks in a
professional working environment, as well as analyse related issues thereby making decisions
based on their knowledge which has been conveyed.
As of February 2017, VILAS has successfully organized 13 SCE courses and delivered more than
150 participants useful knowledge and experiences for their studying on Supply Chain. After
the course, it is more like for the participants to identify their career orientation. Our
outstanding learners has shined brightly in many Management Trainee programmes in
multinational companies. Some of them even gained many spectacular exceptional
achievements in Global Student Challenge powered by The Fresh Connection, such as 1 Gold
and 1 Silver prize at Regional round in 2017.
CONTENTS
Overview ........................................................................................................................................................ 5
Purchasing ...................................................................................................................................................... 8
Supplier Selection....................................................................................................................................... 8
Supplier Market.......................................................................................................................................... 8
Negotiating................................................................................................................................................. 9
Freight Audit.............................................................................................................................................11
Operations....................................................................................................................................................12
Mixers.......................................................................................................................................................13
Sales ............................................................................................................................................................. 18
Negotiating...............................................................................................................................................18
Supplychain Management............................................................................................................................ 22
Finance ......................................................................................................................................................... 25
Investment ...............................................................................................................................................27
3
ROI ............................................................................................................................................................ 27
Entities .....................................................................................................................................................28
Reports ......................................................................................................................................................... 33
Components .............................................................................................................................................33
Warehousing ............................................................................................................................................35
Mixing.......................................................................................................................................................36
Bottling .....................................................................................................................................................37
Product .....................................................................................................................................................38
Customer/Product....................................................................................................................................41
Customer..................................................................................................................................................43
FAQ............................................................................................................................................................... 45
4
OVERVIEW
Welcome to The Fresh Connection. Before you and your team members save The Fresh Connection from
certain ruin, it’s useful to understand how its supply chain functions.
The Fresh Connection is a producer of fruit juices. It provides a modest range of flavors. Only a couple of
flavors are produced in a limited number of pack sizes. These are delivered to few customers, which are
all retail companies. The Fresh Connection supplies its customers directly. The delivery is made on the
next day after the customer places an order.
The Fresh Connection products are stored on pallets in the finished goods warehouse. They stay there
until a delivery is made, or until their shelf life has expired. The finished goods have, from the time of
production, a shelf life of 20 weeks. The customers claim a significant part of these 20 weeks, usually 60
to 80%. This leaves The Fresh Connection with a total shelf life of 20 to 40% of the 20 weeks. In case the
shelf life is expired, the product will unfortunately have to be destroyed. The Fresh Connection does not
have its own fleet to deliver to its customer’s distribution centres and instead outsources the
transportation to an extremely reliable partner.
The Fresh Connection manufactures the products it sells itself. The fruit juices are mixed in The Fresh
Connection’s own mixer. Immediately after mixing the fruit juice, it is bottled using the bottling line. All
pack sizes are bottled on the same line.
The components
A finished product consists of two components – packaging and pulp (concentrated fruit juice). An
extensive bill of materials lists what quantity of which component is used in a finished product. The
formula - the fruit-pulp mix and additives, that give the fruit juices their unique flavor – has been one of
the most closely-guarded Fresh Connection secrets for over a century.
The suppliers
The components are purchased from suppliers. The packaging material is bought from local and
regional suppliers. Pulp is acquired either from fruit traders or producers from across the globe.
Each supplier has its own characteristics regarding, for example, price, lead time and reliability.
5
Pack 1L PET Orange Mango Vitamin C Water
Orange 52 - - 0.45
Mango 52 - - 1.1
Vitamin C 52 - - 4
6
Content drum (liter) 250
7
PURCHASING
SUPPLIER SELECTION
Supplier selection
The VP Purchasing can select suppliers on the supplier market. Only one supplier can be selected per
component type. The small packs and the large packs are, for example, delivered by the same supplier.
Each supplier has a number of non-changeable characteristics, such as certification and free capacity.
Aside from these characteristics, you can negotiate the terms of delivery with the supplier.
Cancelling contracts
If a contract with a supplier is not to your liking, you can cancel it. However, there are costs associated
with cancelling contracts. These costs depend on the remaining contract duration and the contract value
(the purchasing value at the supplier). Cancelled contracts CANNOT be undone, so think carefully before
accepting the associated costs.
Expiring contracts
The remaining contract duration decreases by one round each new round. If you do not extend the
contract duration, then the contract will expire. In that event you will receive a notification email in your
inbox, after which you can either select a new supplier free of charge or offer your old supplier a new
contract.
No supplier selected
Should you – either accidentally or deliberately - not select a supplier, then the corresponding component
will not be delivered. The result is that the finished product which is dependent on this component
cannot be produced, and consequently cannot be sold. This is bad for sales and revenue. So do select a
supplier for each component!
SUPPLIER MARKET
Component
Price indication
Certification
A certified supplier has greater control over his production process, which means he is more reliable with
regard to fulfilling an agreement.
Location
The supplier's location. Suppliers that are located nearby usually have lower transport costs and shorter
lead times.
Free capacity
8
An indication of the supplier's available capacity, including a possible contract with The Fresh Connection.
A low free capacity will negatively influence the reliability of the supplier.
NEGOTIATING
Negotiations
The Purchasing Manager can negotiate the terms of delivery with the suppliers. Negotiations can be held
regarding trade units ordered, delivery windows, duration of the contract, terms of payment and review
periods, amongst other things. If you impose high requirements on a supplier, then the latter will have a
high contract index. This means that the purchase price will be high. By imposing lower requirements on a
supplier, you will be able to insist on a lower purchase price.
Contract index
The contract index is the result of these negotiations with the supplier. The contract index reflects the
terms of delivery you impose upon the supplier. If your requirements are high the result will be a high
contract index, and as the requirements decrease, so does the contract index. For example, a contract
index of 1.05 will mean that you will pay a premium of 5% over and above the basic price of the
component. A contract index of 0.95 will, on the other hand, lead to a discount of 5% off the basic price.
Contract duration
The contract duration is the number of rounds for which a contract is valid. Suppliers generally prefer
long-term contracts, which provide them with more security. As suppliers strive to maintain a good
relationship, a longer contract also results in improved delivery reliability. Please note, though, that the
costs related to terminating a contract depend on the duration of the agreed contract. Buying out a long-
term contract is more expensive than buying out a short-term one. So if you wish to switch suppliers
more frequently, agree shorter term contract to avoid the cost of termination.
The agreed percentage of the number of units that will be delivered on, or before, the promised time.
Whether the supplier will fulfill this agreed percentage depends on his free capacity and certification.
The lead time is a supplier characteristic. It cannot be negotiated. The lead time is the number of days
between the moment of ordering and the moment of delivery. Suppliers that are located far away have,
in general, a longer lead time than suppliers located close by.
Delivery window
The delivery window is the margin within which the promised time of delivery falls. Should the delivery
window be four hours, the supplier is then obliged to deliver within a very precise period, while if the
delivery window provides for one week, the supplier may deliver a week earlier or a week later than
agreed to. Suppliers naturally prefer a large delivery window.
Transport costs
The Fresh Connection not only pays for the components, but for the transport costs from the supplier to
The Fresh Connection too. These transport costs are dependent on the distance to The Fresh Connection.
9
Suppliers located far away charge higher transport costs than those located close by. The mode of
transport also influences the transport costs. Sea shipping is cheaper than road haulage.
Transport mode
With some suppliers you can negotiate about transport modality. This modality influences delivery lead
time and transport costs. Transport by boat has a longer lead time, than transport by truck, but also lower
transportation costs.
The review period is the number of working days between two review moments. Suppliers prefer a long
review period, in which case the average size of the order will be greater and the number of orders
smaller. This means that the supplier has lower handling and administration costs. However, should the
average size of the order be larger, then so will the average stock and the peak capacity load in the raw
materials warehouse will likewise increase.
Trade unit
A trade unit is the unit you use when placing orders with the supplier. Should the trade unit be a pallet,
you will then always order a multiple of pallets, and if it is a TL, you will always be supplied in a multiple of
full truck loads. The relevant trade unit depends on the type of component supplied by the supplier.
Packaging is delivered in large rolls on pallets, so you can only order it by the pallet or TL. The other
packaging material can be ordered by the pallet layer, pallet or TL. Pulp and additives are liquids and can
be supplied in drums (250-liter content), IBCs (1,000-liter content) or tankers (30,000-liter-content).
Suppliers prefer large trade units, as it saves on handling and administration costs. Increasing the trade
unit size will thus decrease the contract index, but it will also increase the average stock as well as peak
capacity load for the raw materials warehouse.
Quality
Quality is a characteristic of a component. Quality can either be good, average or poor. Good quality
components are obviously more expensive than poor quality components.
The quality of packaging material affects the number of breakdowns at the botlling lines. The better the
quality, the lesser breakdowns occur. The quality of the fruit pulp affects the taste of the juices The Fresh
Connection makes. Directly after production the taste is tested by an official taste inspector. This officer
decides if the juice lives up to the aroma, color and taste standards of The Fresh Connection. In case they
do not, the finished product is put aside to be scrapped immediately. Luckily in most of these occurrences
production can be stopped, so not too many components go to waste.
Free capacity
The free capacity is the part of the supplier’s total capacity that is not yet utilized. A supplier with a high
free capacity is able to process the orders from The Fresh Connection on time. On the other hand, a low
free capacity indicates that the supplier has reached the peak of his capacity and therefore cannot
instantly settle each order from The Fresh Connection.
Certification
10
Certification indicates whether the supplier controls his internal production processes. Certified suppliers
are more reliable than non-certified suppliers, both in terms of delivery reliability as well as the quality of
the delivered material.
The payment terms is the period within which the supplier must be paid. Suppliers want the payment
terms to be as short as possible.
The payment terms can take effect at the moment of ordering, or the moment of delivery. The method
that the supplier employs is one of his characteristics.
Supplier development
For each supplier you can specify whether you wish to implement a supplier development program. A
supplier development program costs €60,000 per annum. This type of program improves the
performance of suppliers and facilitates the certification of their production processes. The delivery
reliability and the quality of the materials delivered by suppliers also improve, and their emission index
decreases. The success of a supplier development program depends on several factors, including the
importance of The Fresh Connection to the respective supplier and the duration of the contract.
Location
DUAL SOURCE
Selecting a dual source
A supplier can also be selected as a dual source. Only one dual source can be selected for each
component type. You can select a dual source by navigating to the suppliers market and selecting "Dual
source". Before selecting a dual source, remember that for each selected supplier an amount of €40,000
is charged per annum for supplier management.
If a dual source is selected, then replenishment orders are issued to this dual source if The Fresh
Connection threatens to run out of stock. In this event the size of the replenishment order is equal to one
week of expected demand. By selecting the correct dual source, it is possible to reduce supply chain risks.
FREIGHT AUDIT
Syncada Freight provides freight payment and audit services. A software solution that helps to
substantially save costs, by auditing 100% of the freight invoices, reducing duplicate payments,
eliminating bills paid in error, and gaining visibility into freight costs.
11
OPERATIONS
A raw materials inspection can be introduced to check the quality of the supplied materials upon arrival in
the inbound warehouse or tank yard. The materials will be inspected by means of random sampling and,
should the quality be substandard, it will be immediately rejected. This inspection will result in a decrease
of breakdowns at the bottling lines, as the defective packaging material is rejected before it gets there. It
also decreases rejects of finished products, since the fruit pulp is inspected before it is processed.
However, the introduction of a raw materials inspection will also involve costs, being 2 hour per order
line.
Pallet locations
The delivered packaging is stored in the raw materials warehouse, while fruit pulp and additives delivered
in drums or IBCs (Intermediate Bulk Containers) are stored in the same warehouse. The costs related to
the raw materials warehouse are €200 per pallet location (the area required to store one pallet) per
annum. You may be able to decide whether to increase or decrease the number of pallet locations in the
raw materials warehouse in each round. Increasing or decreasing the pallet locations involves no
additional expenditure. You will always pay the fixed rate for each pallet location every year. If there is
insufficient space for storing the pallets, the remainder is then temporarily stored in an overflow
warehouse. The rate for this overflow warehouse is €3 per pallet location per day.
Fruit pulp delivered in tanks is pumped straight into one of the tanks in the tank yard. Should there be
insufficient space in the tank yard, the pulp will be pumped into IBCs (Intermediate Bulk Containers) and
stored in the raw materials warehouse. The tank yard naturally also involves expenditure and a tank costs
€4,000 per annum. You can decide to increase or decrease the number of tanks in the tank yard in each
round. There are no costs associated with increasing or decreasing the number of tanks. You will always
pay a fixed rate for each tank per year.
Your tank yard 3rd party PulpStore will deliver pulp Just-in-Time for production. Cost for this partnership
are €25 for each day a tank is being used ,€10 intake cost per delivery and €100 delivery cost (including
transportation to The Fresh Connection) for each delivery to production.
The labor force of the raw materials warehouse is primarily engaged in taking in the delivered pallets and
making their contents available in good time for production. The intake of deliveries costs 1 hour per
order line and 6 minutes per pallet, while making a pallet available for production costs 6 minutes and
making a tank available for production costs 12 minutes time. In addition, the employees lose
approximately 4 hours per day in keeping the warehouse and tank yard running. When there are
insufficient pallet locations in the raw materials warehouse, the manpower is also used to move the
pallets to and from the overflow warehouse, costing them an average of 6 minutes per pallet. They are
12
also responsible for filling the IBCs (Intermediate Bulk Containers) if there is insufficient capacity in the
tank yard, costing them a further 1 hour per IBC. Should more manpower be required than is available on
any given day, The Fresh Connection will then hire in flexible labor, using a completely automated system.
This flexible labor must be given induction training and its productivity per hour is subsequently a little
lower than that of the permanent staff. An employee costs €40,000 per annum, while an hour of flexible
labor is rated against a tariff of €42.
Overtime
If, on a certain day, the required labor capacity exceeds the availability of labor in the raw materials
warehouse, then The Fresh Connection will hire flexible manpower. This flexible manpower needs to be
trained and is therefore less efficient than permanent employees. Permanent employees cost €40,000
per annum, while flexible manpower is charged at €42 per hour. Lack of capacity in the raw materials
warehouse will also negatively influence production plan adherence. Should the warehouse employees
be extremely busy, then it will be impossible for them to prepare all components for production. In that
event, production will not take place as planned.
The intake time is the number of days the employees in the raw materials warehouse require to take in
the incoming pallets. This intake time only applies to the delivery of pallets, as the contents of tankers are
immediately pumped into the tanks upon arrival. Increasing the intake time will lower the peak labor
requirements in the raw materials warehouse, which means that the need for flexible labor will likewise
decrease. However, it will then naturally take longer before the raw materials are available for
production.
Pool Workforce
Staff of the inbound and outbound warehouse can be pooled together. The employees are trained, so
they obtain the skills to enable them to do the work in both warehouses. Pooling them makes it easier to
handle the volatility in workload. Costs of training are €1,000 per employee per round.
MIXERS
Mixer selection
The mixers mix the unique flavors of The Fresh Connection. You can choose between three mixers, each
with its own characteristics - the large mixer, a small mixer, and one in between the two. You can freely
switch mixers during the game. However, make sure that the finished product is always assigned to a
mixer. If this is not the case, then the finished product is not mixed, and hence not sold.
Mixer characteristics
Each mixer has certain characteristics, such as a technical minimum, a maximum capacity, an operating
time and a cleaning time, costs per annum and per hour and an investment. The technical minimum is the
minimum number of liters the mixer can take. Should the content of the mixer be below that level, the
juice will not be properly mixed. This technical minimum therefore influences the lot size of the finished
product. If the technical minimum is for instance 10,000 liters, then of a finished product in 1 liter
packages at least 10,000 packages are filled at each batch run. The maximum capacity is the maximum
capacity of the mixer - the number of liters the mixer can mix in one run. The mixing of one batch
consumes a number of hours of operating time. Once the finished product for a particular flavor has been
13
mixed, the mixer will have to be cleaned before a new flavor can be mixed. The time taken to do this is
the cleaning time. Both the operating time and the cleaning time must be dealt with by staff and this is
expressed in costs per mixing-hour. For the hours that the mixers are not operational, no expenses are
incurred. Aside from the costs per hour, there are also fixed costs associated to owning a mixer and an
investment which is added to The Fresh Connection's total investment.
Mixer assignment
When assigning the finished product to a mixer, it is wise to keep the technical minimum of the mixer into
account. This is the number of liters mixed at each batch. If you assign a slow-moving product to a large
mixer, then you might mix too many liters in each batch. It will take a while before the items made in one
production run are sold and it might result in shelf life problems. In any case, make sure each finished
product is assigned to a mixer. Should you not, the finished product will not be mixed and therefore not
be sold.
BOTTLING LINES
Bottling line selection
The packages are filled on the bottling line. You can freely switch bottling lines during the game. No
additional costs are charged for switching lines. There are efficient lines, flexible lines and all-round lines.
A flexible line has short changeover times, but cannot fill many liters per hour, while an efficient line is the
exact opposite. An all-round line is in between the two. Make sure that each finished product is assigned
to a bottling line. If a finished product is not assigned, it is not produced, and hence not sold.
Each finished product can be run on each bottling line, regardless of the type of packaging material used.
Each bottling line has certain characteristics, such as the number of liters that can be filled each hour, the
number of operators, sensitivity to breakdowns and changeover times. When switching from bottling one
finished product to a different finished product, a changeover is needed. This changeover time is used to
prepare the components for production, clean the bottling line, and if necessary change the size settings
of the bottling line. Either a formula changeover is needed (if the packaging material and size do not
change, but only the flavor) or a size changeover. A size changeover takes more time than a formula
changeover.
Once the bottling line is started, then inevitably there will be a start up loss, due to tuning issues. This
causes partly filled packs, caps missing on packs etc. This start up loss is expressed a a percentage. In
general, there is only a start up loss during the first hour of running a new batch. After the first hour,
normally there is no start up loss anymore.
Each finished product can be assigned to any bottling line. Make sure that each finished product is
assigned to a bottling line, otherwise the finished product will not be produced, and hence cannot be
sold. If you withdraw a bottling line you need to assign the associated finished products to a different line.
Number of shifts
Each bottling line is manned by a fixed number of operators. These operators ensure that the
components are supplied and that the finished product is processed. They also sort out breakdowns and
14
change over the lines. The operators work in shifts. One shift can work 40 hours a week, two shifts 80
hours, three shifts 120 hours, four shifts 144 hours while five shifts can work 168 hours in a week. Each
operator costs €40,000 per annum.
If the required capacity in a week is higher than 168 hours, then automatically the load above 168 hours
is being outsourced to a reliable partner. This partner bottles the juice at a similar line as The Fresh
Connection does. Due to the transport of components and the finished product, the personnel costs of
outsourcing are 2 times as high as the costs of overtime.
Overtime
Should more labor capacity be required in a given week than is available, The Fresh Connection will hire
flexible manpower. The costs associated with flexible manpower are €42 per hour. Moreover, flexible
manpower has less experience in operating the bottling lines than permanent employees, and so the
flexible manpower is less efficient than the permanent staff. Insufficient work capacity is also detrimental
to the production plan adherence. If the production plan adherence is low it often takes longer before the
finished product is in stock.
Breakdowns
Each bottling line is subject to breakdowns. These breakdowns are in part caused by external factors,
such as ageing and susceptibility to breakdowns, while the quality of the supplied packaging and the
tolerances of the bottling lines also play a role. If the tolerances do not match the quality of the
packaging, many additional breakdowns will result.
Preventive maintenance
The weekly down-time can be limited by undertaking preventive maintenance. A little preventive
maintenance costs 1 hour a week per bottling line, but will reduce the number of breakdowns per line by
30 %. A greater deal of preventive maintenance will cost more time – 3 hours a week per bottling line –
but will reduce the number of breakdowns by 50 %. The number of breakdowns can be furthermore
reduced by introducing an incoming goods test, which means that substandard quality packaging material
can be rejected before it reaches the bottling lines.
One way of reducing the duration of the breakdowns is the “Solving Breakdowns” training course. The
operators will, after completing this course, be able to solve simple breakdowns themselves, which
means they are less dependent on the very busy Technical Services staff. The result is that the average
duration of a breakdown decreases by 40 %. The costs of this training course amount to €400 per
employee and will be provided to all permanent staff.
The speed of the line indicates the number of liters that can be produced per hour. The speed can be
increased through the action “Optimizing the bottling line speed”. Although this action costs €30,000 per
annum, the bottling line can then produce 10 % more liters per hour.
SMED action
15
A bottling line will have to be changed over between two production runs. This time is used to ready the
components, clean the bottling line and, if necessary, reset the set-up of the bottling line. Between two
production runs using packs that are the same size, only a formula change over will be necessary. While
between two production runs of packs of a different size – for instance from 1-liter packs to 1.5-liter
packs – a size change over is necessary. Size changeovers take more time than formula changeovers. You
can also reduce the change over time by implementing a SMED corrective action (Single Minute Exchange
of Die). Doing this will cost €20,000 per annum, but will result in the changeover times being reduced by
about 30 %.
Special software, that precisely records what happens to the juice after it has been mixed: it records in
which filling batch the mixed batch is used and to which customers the filling batches are delivered. This
is very useful information if product needs to be recalled for whatever reason, since it is exactly known
what the original mixed batch is to which a suspect product belongs. Effectively only this original mixed
batch needs to be recalled . This saves a lot of time and money in such a case, since if this information is
not at hand, a lot more filling batches need to be recalled to rule out the possibility that suspect product
is still on the market. Implementing Track & Trace costs €10,000 annually.
Quarantine
By means of quarantine, the product is blocked for shipment for another 3 days. It allows for carrying out
quality tests before it is delivered to customers. This rules out the possibility that inferior products end up
in customer's hands. Quarantine has a cost of €5,000 annually.
The finished goods warehouse is used to store finished product that is ready for delivery. The costs for
the finished goods warehouse are €200 for each pallet location per year. You may be able to decide
whether to increase or decrease the pallet locations in the finished goods warehouse in each round.
Increasing or decreasing the pallet locations does not involve additional expenditure, and you will always
pay the fixed rate for each pallet location every year. If there is insufficient space in the finished products
warehouse, the rest of the pallets will then be temporarily stored in an overflow warehouse. The rate for
this overflow warehouse is €3 per pallet location per day.
The employees in the finished goods warehouse must store the pallets arriving from production. They
also pick the customers’ order lines and ready them for end-distribution. Storing the pallets coming from
production costs 6 minutes in time for every pallet. The picking costs 10 minutes per order line, 6 minutes
per pallet or pallet layer and 3 minutes per outer box. Should there be insufficient pallet locations
available in the finished goods warehouse, the staff will then move the pallets to an overflow warehouse.
Moving one pallet from or to the overflow warehouse costs 6 minutes. Processing a pallet of obsoletes
for destruction takes the same time. In addition, the staff spends 4 hours per day cleaning and tidying up
the finished goods warehouse.
An employee costs €40,000 per annum, while an hour of flexible labor costs €42.
Overtime
16
If, on a given day, there is a need for more additional labor than is available from the permanent staff,
The Fresh Connection will then hire in flexible manpower. This flexible manpower needs to be trained,
and is therefore less productive than permanent employees. An hour of flexible labor costs €42. A lack of
permanent capacity in the finished goods warehouse is detrimental for the service level towards the
customer. If the employees are too busy, then they are not able to prepare all orders for the final
distribution in time.
17
SALES
NEGOTIATING
Negotiations
The VP Sales can negotiate the terms of delivery with The Fresh Connection’s customers. Negotiations
can concern order units, service levels, shelf life, payment terms and many other things. A well-
negotiated sale can result in a good contract index being agreed to.
Contract index
The contract index is the result of these negotiations. This index demonstrates whether the customer is
prepared to pay an additional sum over and above the basic sales price for the finished product, or
whether he insists on a discount. A contract index of, for example, 0.95 means that the customer insists
on a discount of 5%, while for a contract index of 1.05 the customer will offer a premium payment of 5%.
This aside, the contract index is not all-determining when it comes to the final sales price. If the supply
chain performance does not, in terms of service levels, fulfill the agreements made with the customer,
then the customer will require a discount on the contract index. On the other hand, should the logistical
service be far better, the customer will be prepared to offer a premium on the contract index.
Service level
The service level is the most crucial of the agreements reached with the customer. The customer
naturally expects a high service level and is prepared to offer a high contract index in return. However,
this arrangement also entails a risk. Should the promised service level not be delivered, the customer will
insist on a substantial discount on the contract index, which will be detrimental to the final sales price.
Once again, the customer will offer a small bonus should the service level prove to be better than had
been agreed upon. All in all, the issue of the service level agreement must be finely balanced with that of
feasibility.
The extent to which the service level is calculated is also agreed upon with the customer and can be
either items, order lines or orders. This therefore means that the service level can be calculated either as
the total number of items, order lines or orders supplied directly from the stock as a percentage of the
total number of requested items, order lines or orders.
All the customers insist on having a part of the total shelf life period of a finished product, which is the
requested shelf life percentage. The customer wants the highest possible percentage of that shelf life,
enabling him to keep the product in stock for a longer period and to offer the consumer greater shelf life.
But the longer the customer can keep the finished product in stock, the shorter the time The Fresh
Connection can do so. Therefore, the probability of the finished goods expiring increase in proportion to
the percentage of the shelf life promised to the customer.
Order deadline
18
The final time during the day at which the customer can place an order is the order deadline. The
customer naturally wants the time to be as late as possible and to that extent offers a higher contract
index. However, if the order deadline is set too late, the employees in the finished goods warehouse may
not be able to get all the order lines out in time.
Distribution pattern
The distribution pattern is the days The Fresh Connection delivers finished goods to customers.
Customers appreciate receiving a steady flow of finished goods. In that case there are no peaks in the
required capacities at their distribution center. Besides that, the average stock remains limited. However,
with an eye on confining the distribution costs it is better not to deliver each day. By combining order
lines, the load factor can be increased.
Trade unit
A trade unit is the unit that the customer uses to place the order lines. If the order unit concerns the
outer box, then the smallest quantity the customer can order is the entire contents of an outer box. On
the other hand, should the order unit be the equivalent of a pallet, the customer will always order a
whole pallet of finished product. Customers value the freedom of being able to order small quantities, but
don’t forget that this may require additional labor in the finished goods warehouse– it takes longer to
pick outer boxes than it does whole pallets.
Promotional pressure
The promotional pressure determines the number and the extent of the special offers involving finished
product from The Fresh Connection that the customers launch. When undertaking a promotional
campaign, the customer gives the consumer a discount and The Fresh Connection will have to cover a
part of that discount. The contract index will thus decrease as the promotional pressure increases.
However, consumers will also be buying increased amounts of The Fresh Connection juice during these
campaigns. So there is an associated opportunity of increasing the revenue.
Promotion horizon
The promotion horizon is an indication of the number of weeks prior a customer informs The Fresh
Connection of an upcoming promotional campaign in terms of type and quantity of product. The
customer would like a short promotion horizon but if the horizon is longer, The Fresh Connection has
more time to anticipate on an upcoming promotion.
Bonus policy
Through the sales volume rebate policy, the customer receives a price discount if a certain volume of
product is purchased within a specific period. Stepping up the sales volume rebate policy means, that
customer satisfaction will increase, as will the contract index. But the customer will then also sometimes
place bigger orders than expected, so the volatility of customer demand also increases.
Payment terms
The payment terms relate to the period in which the customer must have paid for the products received.
The customer would naturally like to have generous payment terms.
Customer Location
19
The location of the customer's DC
CATEGORY MANAGEMENT
Category management
VP Sales can manage The Fresh Connection's assortment. It can be decided in terms of whether or not to
deliver finished product to a certain customer. By reducing The Fresh Connection's assortment valuable
revenue may be lost, but one may also significantly reduce costs.
If you deselect one finished product for one customer, then the finished product will not be delivered to
that customer.
If a finished product is excluded for all customers, then it is not delivered to any customer. This means
there is no need to stock or produce the finished product. VPs of Supply Chain Management and
Operations no longer need to make decisions on this finished product.
If a customer is excluded (for all finished products), then no finished product is delivered to this customer.
The negotiation screen will still be at the tab of VP Sales, but the negotiation won't have an effect.
If certain finished products are excluded so that a certain component is not used anymore, then this
component will not be purchased. VP Supply Chain Management does not have to decide on safety stocks
or lot sizes. However, the contract that VP Purchasing has agreed on remains valid since there are costs
associated to cancelling contracts. Recall that for each supplier that is contracted costs are incurred each
round. If you want to save these costs, VP Purchasing needs to cancel the contract with the supplier.
Relaunch horizon
The number of weeks before the relaunch is started. If the decision has been made to relaunch, then the
timing has to be set, expressed in a number of weeks in the future. In other words the horizon. The idea is
to minimize costs of lost sales and depreciation in inventory value.
ORDER MANAGEMENT
Shortage rule
In the unfortunate event that The Fresh Connection runs out of stock and so cannot satisfy customer
demand, the rule of shortage will determine how the situation is dealt with. If the proportional method is
chosen, the shortage of finished product will then be equally divided over all the orders for the day. Each
customer then receives a little less. If a ‘first-come-first-served’ principle is employed, the customer who
placed an order first receives delivery first and the customer who placed the order second receives
delivery second, etc. Finally, if the principle of customer priority is employed, the customers must be
ranked in terms of priority. The customer with the highest priority will receive delivery first, followed by
the customer with second-highest priority, etc. This means that the lowest-priority customer will suffer
the most from the shortage.
20
Priority
In case there is insufficient stock to satisfy all customer demand, the priority determines which customer
demand is satisfied first. If, after satisfying the first customer's demand, there is still stock left, then the
demand of the customer with second priority is satisfied, etc.
21
SUPPLYCHAIN MANAGEMENT
The safety stock is the stock you set aside to cover uncertainty with respect to production requirements
and the supply reliability from the supplier. The higher the stock, the lower the risk of running out of
stock and so, with a high safety stock, you guarantee reliability of supply to production. A high safety
stock also leads to high stock expenses and higher capital demands. The safety stock is expressed in
forecast weeks (demand forecast). During the frozen period of production, the production planning is
fixed and thus so is the demand for components. During this period there will be little uncertainty with
respect to demand.
The lot size is the minimum quantity that can be ordered. The final quantity ordered will in general be a
bit higher than the minimum because when ordering, the actual demand for the component (how low
the stock is) is taken into account as well as the trade unit agreed to with the supplier.
PRODUCTION PLANNING
Frozen period of production (weeks)
Each week The Fresh Connection’s planning division issues a new production plan. This production plan
determines which finished product will be produced when. An important aspect for the production plan is
the frozen period of production, which is the number of weeks for which the production plan is fixed and
therefore may no longer be changed. Should, for example, the frozen period of production be two weeks,
the schedule for the following two weeks is then fixed. Outside of this two-week period, the production
plan can be changed.
A long frozen period of production is great for The Fresh Connection’s purchasers, because when the
production plan is fixed, the component requirement is then known to an exact degree and the
purchasers can ensure that the deliveries arrive at the right time and in the right quantity. Moreover the
fixed period drives production levelling over that period, such that capacity usage is more evenly
distributed.
The disadvantage of a long frozen period of production is that it limits flexibility and responsiveness,
which impacts availability of the finished product. If the production plan has been fixed for a long period,
one cannot quickly respond to unexpected peaks in demand and customer service will suffer.
The production interval tool can assist you in setting proper production intervals. The tool allows you to
set production intervals for the coming period. Based on these settings, the theoretical consequences
with respect to production capacity and costs are calculated. The tool thus enables you to safely
experiment with production intervals. If the settings do not work out, you can always change them!
22
Settings
The tool takes the decisions of the VP Operations into account. If, for example, the VP Operations has
decided to optimize the speed of the bottling line, the operational time will then be shorter than if he had
not made this decision. If the VP Operations has decided to implement SMED corrective actions, the
changeover time will then be shorter.
Expected demand
The expected demand shown in the production interval tool is the forecast created by the VP of Sales.
Utilization rate
Percentage of how intensively (based on the deployed number of shifts) the bottling lines are being used.
Utilization compares actual time used to available time. Traditionally, utilization is the ratio of operation
time charged (run time plus setup time) to the clock time available. Utilization is a percentage between 0
and 100 percent that is equal to 100 percent minus the percentage lost due to the unavailability of
machines, tools, workers, and so forth.
Costs
The inventory costs cover the expected cycle stock levels. If one produces in larger batches, the average
inventory will be higher. This will drive your inventory cost up. These cost include both interest and
space.
Changeover cost: based on production interval setting the expected number of changeovers is calculated.
If smaller batches are produced, more changeovers result. This will drive up the the capacity required.
These cost cover the labour cost of personnel on the filling line.
After each changeover it will take time for the filling line to come to full speed. Before that point start up
losses are incurred. Some products will not comply to the high quality standards of The Fresh Connection,
cannot be sold and will be destroyed. The costs generated due to this are the start up costs. The more
changeovers the higher these costs will be.
Disclaimer
The tool calculates the theoretical consequences of the chosen settings. In practice, things can naturally
work out very differently. For example, the theoretical calculation does not take demand peaks and the
need for capacity into account. Other matters such as lot sizes and shelf life percentages can also
influence the results in reality.
The safety stock is the stock you set aside to combat uncertainty with respect to uncertainty on the part
of customer demand and the supply of finished product from production. A high safety stock will lead to a
high service level for the customer. But it is not wise to set the safety stock too high, as the finished
product produced by The Fresh Connection only has a limited shelf life. Overly high safety stock will also
lead to high stock expenses. The safety stock is expressed in forecast weeks (forecast of customer
demand).
23
Production interval
The production interval is the number of working days between two production runs for the same
finished product. If the production interval is 1, then the finished product is, produced every day, and if
the production interval is 5, the finished product is produced once every week.
SCENARIO PLANNER
Scenario Planner
The Scenario Planner enables to calculate a scenario twice. The package will calculate the consequences
of your current settings and decisions. The outcome is a report containing the attained values of KPIs
selected by you. The Scenario Planner has an annual cost of €15,000 and requires an investment of
€160,000. During a particular round, provided you have not calculated any scenario, you can activate and
deactivate The Scenario Planner without any costs or investments. However if you do calculate a
scenario, then for that round The Scenario Planner remains active.
24
FINANCE
PROFIT/LOSS ACCOUNT
Finance report
The income received by a company from sales or other sources, such as stock owned in other companies.
In The Fresh Connection it is the revenue derived from the sales of finished products based on the
contract indices of the customers. It is calculated by multiplying the sales price with the number of items
sold and the contract index.
Bonuses awarded and penalties received because of supply chain over- or underperformance. In case of
high discounts, it is wise to make more modest agreements, or improve supply chain performance.
Purchase costs
The value of the purchased components, including transport costs. The purchase costs are high if the
contract indices are high, or if you suffer from a high obsoletes percentage.
Production costs
The production costs are the fixed and variable costs pertaining to the mixers and the bottling lines. For
the mixers, these costs are the fixed costs and the hourly rate per mixing hour multiplied by the total
number of mixing hours. Each bottling line has its own costs pertaining to investment and maintenance.
In addition, there are also the staff costs for the operators manning the lines, both for the permanent
staff and the flexible labor that is contracted in case there is a shortage of labor capacity.
An accounting classification useful for determining the amount of direct materials, direct labor, and
allocated overhead associated with the products sold during a given period of time
Gross margin
The difference between total revenue and the cost of goods sold
Overhead costs
A large amount of money is devoted to numerous other indirectly attributable items – the overheads. The
overhead costs include those for water and power. Furthermore, there are costs associated with the
number of selected suppliers, components, customers, finished products, etc.
Stock costs
The stock costs can be divided up into three categories – interest, space, and risk.
The interest costs concern those costs incurred for keeping components and finished product in stock. A
rate is calculated of 15 % per annum. The components are valued against the purchase costs, while the
25
finished product is valued against the purchase and production costs.
The costs for the space are shaped by the costs for the raw materials warehouse, the tank yard (which
can be subcontracted) and the finished goods warehouse. The costs of the overflow warehouse (which
can be subcontracted) – should one of the company’s own warehouses be short of capacity, are also
included in this item.
As stock can 'disappear' (shrinkage), be damaged, or become obsolete, carrying any inventory poses
some risks. This risk increases if inventories are higher.
Handling costs
The costs for the permanent staff in the raw materials and finished goods warehouses. This item also
includes the costs for the use of flexible labor, which is included should the permanent labor capacity be
insufficient. Finally, the costs for raw materials inspection are also included here. These costs are valued
against the hourly rate of a permanent employee.
Administration costs
The administration costs amount to €50 per inbound order and €10 per inbound order line. In addition,
there is also a rate of €25 per outbound order and €2 per outbound order line. Last but not least to
maintain a relation with a supplier, the yearly costs amount to €40,000
Distribution costs
A logistics service provider takes care of the distribution on behalf of The Fresh Connection to its
customers’ DCs. The rates for this service are: €65 if less than 10 pallets are shipped, €60 if a number of
pallets between 10 and 20 are shipped, and €55 if more than 20 pallets are shipped.
Contract costs
Project costs
The costs of the improvement projects like optimizing bottling line speed and SMED corrective actions
Interest costs
The cost incurred related to accounts payable and accounts receivable, as a result of payment terms
agreements with customers and suppliers. A rate is calculated of 5 % per annum.
Indirect costs
Indirect costs are not directly attributable to a cost object. Indirect costs are typically allocated to a cost
object on some basis. In manufacturing, costs not directly assignable to the end product or process are
indirect. These may be costs for management, insurance, taxes, or maintenance, for example. Indirect
costs are those for activities or services that benefit the whole or part of the organization. Their precise
benefits to a single product are often difficult or impossible to trace. For example, it may be difficult to
determine precisely how the activities of the director of an organization benefit a specific product.
Indirect costs do not vary substantially within certain production volumes or other indicators of activity,
and so they may sometimes be considered to be fixed costs.
26
Labor costs, for example, can be indirect, as in the case of maintenance personnel and executive officers,
Similarly, materials such as miscellaneous supplies purchased in bulk—pencils, pens, paper—are typically
handled as indirect costs.
Operating profit
Earnings or income after all expenses (selling, administrative, depreciation) have been deducted from
gross margin.
INVESTMENT
Investment
The total amount The Fresh Connection invests in buildings, equipment, working capital and software.
The ROI is calculated by dividing the operating profit by the investments.
Inventory
The Fresh Connection invests in component and finished product inventory. The investment in
components is valued against average purchasing price. The investment in finished products is valued
against cost of goods.
Machinery
The investment in machinery is formed by the investment in bottling lines and mixers.
Payment terms
The payment terms with customers and suppliers determine when The Fresh Connection pays for the
purchased components and when it is paid for the finished products sold. The outstanding accounts form
the investment in payment terms.
Software
ROI
ROI
A relative measure of financial performance that provides a means for comparing various investments by
calculating the profits returned during a specified time period. In case of The Fresh Connection it is
Operating profit as a percentage of the Investment during the last half year.
27
MODEL AND ENTITIES
PRICE SETTING
General
An important part of The Fresh Connection game is the price-setting. Price-setting takes place both for
the sale of the finished product and for the purchasing of components. Under the rules of the game one
cannot directly negotiate the price. The basic prices of the components and the finished product are
identical for all the teams, but by negotiating the logistical terms you are able to exercise significant
influence upon the prices. Should you promise your customers great things, you will get a higher price for
the finished product – as long as you can fulfill promises, of course. The same applies to purchasing
components and if you give your suppliers more space in the terms of delivery, the price charged for the
components will be lower. From a technical point of view, price-setting works as follows:
Finished product
All finished product has a fixed basic price. But this basic price is not the final sales price charged to the
customer because, as stated above, the negotiations with the customer will also play a role. The result of
the negotiations with the customer is the contract index. The contract index is a type of measure of
customer satisfaction. Promises to the customer with respect to good logistics will lead to a high contract
index, while moderate promises will result in a lower contract index. The contract index is a number
around 1. A contract index of 1.05 means that the customer is prepared to pay a premium of 5% over and
above the basic sales price, while a contract index of 0.95 means that the customer will demand a
discount of 5% off the basic sales price. But the final sales price is not determined on the basis of
customer agreements reached, but on the basis of these agreements being realized. If a high service level
is promised but not achieved, the customer will then demand a considerable discount. The contract index
is calculated using certain formulas and weighted figures. They are not identical for all customers but
rather reflect the importance that each customer attaches to the various delivery terms. The results of
good negotiations with one customer will therefore not necessarily apply to another customer.
Raw materials
The final purchase price for components is determined in a comparable manner to the sales price of the
finished product. Each component has a fixed basic purchase price. A contract index is determined on the
basis of the results of negotiations with the supplier. Should the supplier be granted relaxed terms of
delivery, he will provide a discount in the form of a low contract index. A contract index of 0.95 is once
again a discount of 5% with respect to the basic purchase price. But if the terms of delivery are strict, the
supplier will set a higher contract index. The contract index is also calculated using certain formulas and
weighted figures and, of course, these will not be identical for all suppliers either.
ENTITIES
General
All the entities in The Fresh Connection have unchangeable characteristics. With respect to components,
for example, this can be the number of items per pallet while in the case of suppliers this can be the
location of the supplier or the transport costs. In this section we will briefly outline the various entities
and discuss their principal characteristics.
28
Customers
The Fresh Connection has a number of customers, who purchase the products produced by The Fresh
Connection. The customers can comprise retailers as well as convenience stores - all with their own
requirements with regard to the terms of delivery.
Finished product
All the finished products have a fixed basic price. This is not the sales price that The Fresh Connection
receives from its customers, which is dependent not only on the base price but also on customer
satisfaction with respect to supply chain performance. Good performance will be rewarded by the
customer, while bad performance will be mercilessly punished in the form of a discount on the sales
price. Depending on the type of packaging, so many items of finished product will fit into an outer box, so
many outer boxes will fit in a layer upon a pallet, and so many layers will fit on a pallet. The finished
product has a limited shelf life and the countdown to its expiry date starts on the day that the finished
product is produced. The Fresh Connection’s customers will insist that they are in possession of the
product for a substantial part of that shelf life, so the finished product must be delivered to the customer
within the period stipulated under the shelf life agreement that was concluded with the customer.
Therefore, if finished product is stocked for too long, it will not be able to be delivered to any customers.
In that event, the finished product will have to be destroyed.
Bottling lines
Each bottling line has its own specifications, detailing the number of liters that can be bottled each hour,
changeover times, sensitivity to breakdowns, tolerances regarding quality of packaging material and the
number of operators. There are also costs associated with depreciation, maintenance, etc.
Mixers
The fruit juices are mixed together in the mixers. Each mixer has its own technical minimum and
maximum capacity. The technical minimum is the minimum number of liters the mixer can take for the
mixing blades to operate properly - should the content of the mixer be below that level, the juice will not
be properly mixed. The maximum capacity is simply the maximum number of liters the mixer can mix in
one run. The run time and cleaning time must also be taken into account. The run time is the time
needed to mix a batch of juice. Once one flavor of fruit juice has been mixed, the mixer will have to be
cleaned – the time it takes being the cleaning time. Finally, there are also variable costs per mixing-hour
and fixed costs pertaining to depreciation, maintenance, etc.
Raw materials
All the components have a fixed basic price. Here too we are not dealing with the price paid for the
component. Rather, the actual purchase price is determined on the basis of negotiations undertaken with
the supplier. Strict terms of supply will lead to higher prices, while more relaxed terms of supply will
lower them. Packaging material is delivered on pallets. Given that the packaging consists of large rolls
when it arrives at The Fresh Connection, it is delivered on whole pallets. Pulp and additives are in turn
supplied in drums, IBC's (Intermediate Bulk Containers) or tank trucks. A drum holds 250 liters and an IBC
1,000 liters, while a tank truck holds no less than 30,000 liters. Drums and IBC's are delivered on pallets
and so are stored in the raw materials warehouse. Tank trucks are, subject to available volume, emptied
in the tank yard. The fruit pulp has a limited shelf life, and should it be stored too long in The Fresh
Connection's tank yard or in the raw materials warehouse, it can no longer be used in production and will
29
thus constitute a loss. The countdown to the pulp's expiry date commences on the day it is ordered from
the supplier.
Suppliers
Each supplier has a number of unchangeable characteristics, including location, market share in the world
market, certification, and others. Location simply refers to the supplier's location, a characteristic which
primarily influences transport costs. Distant suppliers will charge higher transportation costs than
suppliers located closer by. Considering that The Fresh Connection pays for the transport of the
components itself, this could be a significant expenditure. The market share in the world market is
indicative of the size of the supplier on the world market. When a supplier is certified, it is a well-run
business - they are reliable with respect to keeping to agreements, both in terms of the supply being
reliable as well as the quality of the materials supplied. The quality of the supplied packaging is an issue
with regard to the rejection rate as well as the number of breakdowns on the bottling lines. Material of
poor quality will lead to many work interruptions on the lines. The lead time is the time between placing
the order and the delivery of the order, and a distant supplier will have a longer lead time than one closer
by. When dealing with packaging suppliers, the means of production also influences the lead time.
Suppliers who produce Make-To-Order product require more time than those who provide Make-To-
Stock packaging. The same applies to the suppliers of fruit pulp, where a source (a supplier producing the
pulp in-house) requires a longer lead time than a trader. The reliability of delivery refers to the
percentage of orders that the supplier promises to deliver within the agreed to lead time. Please note,
though, this pertains to a promise. There could be any number of reasons why the supplier does not keep
his promise. The free capacity indicates how much the supplier can still take on with respect to
production capacity. In gross form, it indicates this capacity prior to The Fresh Connection concluding a
contract with the supplier, while in its net form it indicates the capacity including the requirements of The
Fresh Connection. A low net capacity is detrimental to the reliability of delivery, as the supplier will
struggle to meet demand during peak periods. This means that his deliveries will often be late.
CALCULATION MODEL
General
You will make many decisions in every round, decisions that are converted by a computational model into
logistical results and team and individual scores. The TFC computational model is a simulation model. We
won't delve into the details of this model, but we will cover the primary aspects that are of concern for
the interpretation of the results.
Simulation
In order to negate the inherent statistical uncertainty of simulation models, we have opted to simulate
each round with a total simulation time of 20 years, even though every round is only equivalent to six
months. So, we will be simulating a six-month period 40 times. The upshot of this is that the results of the
teams will be ideally comparable, even though the teams may have made entirely different sets of
decisions. Another effect is that the logistical results sometimes have a different significance than you
might expect. The number of consignments arrived, for example, will not necessarily be a whole number,
given that it will be an average of 40 simulations. It also means that we can avoid a situation where some
graphics do not correspond exactly to the actual results in terms of the numbers, as the graphics are
created by a sampling of the 40 simulations.
30
Customer demand
There are a number of essential dependencies within the simulation model, the most important of which
we will discuss here. The basis for the simulation model is the customer demand. The customer demand
is determined using certain parameters that are identical for the teams, making the teams' results
comparable. However, each team can influence the customer's demand pattern by negotiating with that
customer. This means that the addition of the sales volume rebate policy will make the demand pattern
somewhat more volatile and an increase in promotional pressure will lead to an increase in demand. In
order to supplement the stock in good time, The Fresh Connection employs a forecast model. The
forecast model generates a fresh forecast every week on the basis of the demand pattern. Although
teams cannot adjust the baseline forecast, they can, by reaching agreements with their customers,
improve the forecasting of promotional special offers.
Delivery
Should The Fresh Connection not be able to deliver an order line (in full) to a customer, it will not be
abandoned. Instead, the order line will remain on backorder and be delivered as soon as sufficient stock
is once again available. However, a low service level will be penalized in terms of revenue, given that it
will lead to a low sales price.
Shelf life
The simulation model keeps accurate records of when a finished product is produced. The shelf life
period for the product commences at that point. When delivering orders to the customer, wherever
possible the product with the closest shelf life expiry date - that is still within the shelf life agreement with
the customer - will be delivered to the customer. Stock that can no longer be delivered to any of the
customers will constitute a loss and will be destroyed.
Production planning
On the basis of the parameters established by each team, a production plan is generated each week in
the simulation. The production planning is drawn up in such a way that the production orders are, insofar
as is possible, spread throughout the week, reducing the peak demands of production capacity. However,
it will not always be possible to adhere to The Fresh Connection's production planning. Insufficient
production capacity and a shortage of availability of production components are the two biggest factors
which negatively influence production plan adherence.
Component demand
Demand for each component is generated using the Bill of Materials and production. A forecast is also
created for each component, based on the finished product forecast and the production planning. This
forecast is used to administer component stock. Should the component stock be on the point of
becoming too low, then a replenishment order from the selected supplier of that component is
automatically generated.
Supply
The supplier will deliver the order within the agreed delivery time. However, The Fresh Connection's
suppliers are not all equally reliable. The degree of unreliability of the suppliers is translated into an
uncertainty regarding delivery time. Unreliable suppliers will frequently deliver late, while reliable
suppliers will almost always deliver on time.
31
32
REPORTS
SUPPLIER/COMPONENTS REPORT
Supplier/component report
This report contains the operational results of the suppliers. A distinction is made between the
components supplied.
Rejection (%)
Rejected material as a percentage of the total value of delivered material. Packaging material can be
rejected if the quality does not meet the tolerance levels of the bottling line. Fruit pulp can be rejected if
the aroma, color or taste does not meet the specifications of the quality inspector of The Fresh
Connection.
Shipments
The number of shipments delivered by the supplier during the previous round.
Order lines
The number of order lines delivered by the supplier during the previous round.
Purchase value
The total purchasing value, including transport costs, over the previous round.
Transport costs
The transport costs made previous round to transport the purchased components to the The Fresh
Connection
Relation
The quality of the supplier relation. This relation has a big influence on the Time to Recover (TTR), in case
the supplier gets hit by a calamity. In general one can say that supply to important customers with the
best supplier relation is restored the fastest. Elements to strengthen the relation are e.g. long term
contracts and close collaboration.
Items/liters purchased
The total number of items or liters purchased during the previous round, including rejected items and
those past their shelf life.
This report contains the results regarding the market forces on the supplier market.
COMPONENTS
Component/Supplier report
33
This report contains the operational results regarding the supply of components.
Component report
Th report containing the operational results per component related to storage and availability for
production
The percentage of all the items or liters delivered on, or before, the promised time. For that matter, an
order delivered within the delivery window is considered to have been delivered on time.
Inventory (pieces)
Number of replenishments
Inventory (weeks)
Inventory (value)
The number of items in stock on an average day valued against the average purchase price (this price
includes transport costs).
Economic Inventory
Component inventory available for future production orders. This is the amount of component physically
in stock plus planned supplier deliveries minus any production requirements already planned.
Obsoletes (%)
The number of purchased items not utilized before the expiry of the shelf life date as a percentage of the
total number of items purchased.
Cost price
The average purchase price per item or liter, including transport costs. In other words, this is the total
purchase value divided by the number of purchased items.
The average demand per week. The demand per week is determined by the production orders of the
finished products that contain the components.
Order size
34
The percentage of total demand from production directly available upon request. A low availability for
production will have a negative effect upon the production plan adherence.
Forecast error
The Mean Absolute Percentage Error is a measure of the forecast unreliability. It is determined by
specifying the absolute forecast error (demand minus forecast) on a weekly basis. The sum of the forecast
errors is then divided by the sum of the demand. A MAPE of 0% is the ideal, in which case the demand is
equal to the forecast. But if the MAPE is high then the forecast is unreliable.
Stock development
The stock development of the component or the finished product during the previous round
Bias (%)
The bias is calculated by evaluating the forecast of the previous round against the real demand in the
current round. Given that there is no separate forecast for components, the Bill of Materials for each
product is used to derive it from the finished goods forecast.
The bias is the relative difference between these components. In other words, it is the forecast minus
demand divided by demand. Using this definition, a positive bias means that the forecast was higher than
demand, a negative bias means that the forecast was lower than demand.
Either postive or negative biases are likely to lead to issues. A positive bias drives increased
inventory. Clearly this is due to the fact that the predicted requirement is higher than actual sales. As a
result your inventory cost will increase and potential for obsolescent products increases.
A negative bias on the other hand, can lead to low inventory covers, which may result in poor component
availability for production.
WAREHOUSING
Warehousing report
The report containing the results regarding stocking components and finished products. A distinction is
made between the raw materials warehouse, the tank yard and the finished goods warehouse.
Capacity
The capacity of the warehouse or tank yard, so the number of pallet locations or tanks.
Usage
The average number of pallets on stock or the average number of tanks used. A higher usage number
than capacity number, means a capacity shortage and this leads to overflow: a shortage in tank capacity
means pulp needs to be stored in IBCs in the inbound warehouse, a shortage in the inbound warehouse
leads to overflow to another warehouse.
A measurement of the utilization of the total storage capacity of a warehouse or storage facility. So the
average number of pallets or tanks on stock divided by the number of pallet locations or tanks. If the
35
utilization rate exceeds 100%, then there is a structural undercapacity. It might be that the utilization rate
is below 100%, but overflow is used to cater for peak demands in capacity.
Overflow (%)
For the warehouses this is the number of pallet location days in the overflow warehouse as a percentage
of the total demand for pallet location days. For the tank yard this is the volume that is pumped directly
into IBCs upon arrival at The Fresh Connection (because of lack of space in the tank yard) as a percentage
of the total volume supplied. It might be that the utilization rate does not exceed 100%, and still overflow
exists to cater for peak demands in capacity.
Average number of inbound order lines in the raw materials warehouse per week. For the finished goods
warehouse it is the average number of outbound order lines.
Average number of inbound pallets or tanks per week for the raw materials warehouse and tank yard.
The average number of outbound pallets per week for the finished goods warehouse.
The average number of flexible workers contracted to undertake work in the raw materials warehouse. It
may be that the average capacity in the raw materials warehouse is sufficient, but flexible manpower is
still contracted in order to cater to peak demand with respect to capacity.
Average required labor capacity per week in the raw materials warehouse
Average required labor capacity in the finished goods warehouse per week
Outsourced tank-days
The average number of tank days at the consumated outsourced tank yard each week.
MIXING
Bottling and mixing report
The report containing the results of the bottling lines and the mixers.
The time during which the mixer is cleaned as a percentage of the total time that the mixer is operational.
A large cleaning time percentage indicates small lot sizes.
36
The average number of liters of juice created in the mixer. If the average lot size is much smaller than the
mixer’s maximum capacity, the flavors are produced in small batches.
BOTTLING
Runtime (hours)
The average time per week used for filling the packs or bottles.
Runtime (%)
Average time per week used for filling the packs or bottles as a percentage of the total capacity (i.e.
capacity based on the number of shifts).
The average time per week used for changing over the bottling line. This time includes changeover times
for both size changeovers and formula changeovers.
The average time per week used for changing over the bottling line as a percentage of the total capacity
(i.e. capacity based on the number of shifts).
The average time per week that the machine is broken down. Should preventive maintenance be
undertaken, then the time required for this will also be included in this item.
The average time per week the machine is broken down as a percentage of the total capacity (i.e.
capacity based on the number of shifts).
The unutilized capacity is the average time during which the bottling line is idle. In other words, it is the
total capacity of the line minus the average total time necessary (operating time, changeover time and
breakdown time).
Average time during which the bottling line is idle as a percentage of the total capacity (i.e. capacity
based on the number of shifts).
Overtime (hours)
The average time per week that the line is not operated by one of the permanent shifts. In this case,
flexible labor is used. It could be that, despite a positive percentage of unutilized capacity, overtime has
been worked. The demand for labor capacity is not the same every week, which means that on average
there may be sufficient capacity, but in some weeks it might be insufficient.
Overtime (%)
37
Average time per week that the line is not operated by one of the permanent shifts as a percentage of
the total capacity (i.e. capacity based on the number of shifts).
Outsourced production
The average weekly number of outsourced production hours. Production is outsourced when the weekly
bottling capacity required is higher than the weekly available hours. In those cases the capacity shortage
can no longer be covered with overtime and outsourcing is the only option left.
Outsourcing (%)
The percentage of total production that is outsourced. Production is outsourced when the weekly bottling
capacity required is higher than the weekly available hours. In those cases the capacity shortage can no
longer be covered with overtime and outsourcing is the only option left.
The percentage of production runs that is completed on time and in full. The production plan adherence
is influenced by overtime (in the event of overtime, the production planning is not always met) and by the
availability of components.
Start up loss
After each change over the speed of the filling line gradually builds up. During the start up of production
the line needs to be tuned. This results in a percentage of finished products that are irrevocably lost in
the first hour of production. These products cannot be sold and will therefore be scrapped.
PRODUCT
Product report
The report containing the results related to the sales of finished product
Product report
The report containing the operational results per finished product related to production, storage and
availability
Weekly Demand
The average weekly demand for a given finished product in the previous round. This is a simple average
based on all parameters, product and customer portfolio of the previous round. New products and/or
clients etc. in the current round will not be taken into account.
The total demand in pieces per week, being the aggregate of all the customers.
38
The total demand in a week, being the aggregate of all the customers, valued against the average sales
price.
Forecast
A good forecast is critical for a succesful operation in The Fresh Connection. Without a good forecast it is
impossible to assess the required capacities and inventories. The forecast is a result of the first two
columns and concerns the average weekly demand for the coming period.
Sales price
The sales price attained averaged over all the customers. This average is calculated as a weighted average
on the basis of the volume realized with the different customers.
Inventory (weeks)
Inventory (value)
The average amount of inventory expressed valued against the the cost of goods.
The percentage of demanded units, that was satisfied through inventory or by the current production
schedule in time to satisfy the customers’ requested delivery dates and quantities.
The On Shelf Availability (OSA) is a measure for the level availability of finished product on the retailer
shelf. The OSA will depend on the retailer, the product, and the service level delivered to the retailer's
D/C.
A high-end retailer will have many products per square meter of shelf space, resulting in a limited space
for any given product on shelf. The store inventory is then held in a 'back of store' (in story inventory
room elsewhere on the premises). If a product runs out on shelf replenishment from this 'back of store'
may not be in time. Especially high runners may suffer from this. Discounters will have less of an issue as
the full box of product will be in the shelf.
If your service to the retailer's D/C is too low, the stores themselves may not be replenished in time,
which may further hamper replenishment to shelf in store: a lower OSA results.
Economic Inventory
39
Product inventory expressed in weeks forward cover. The is the amount of product physically in stock
plus planned production minus any backorders. So the inventory cover mainly depends on safety stock
level and production interval, which largely determine the total physical inventory, and the fixed period,
which drives the number of planned production batches.
The percentage of demanded order lines, that was satisfied through inventory or by the current
production schedule in time to satisfy the customers’ requested delivery dates and quantities.
Order lines
Obsoletes (%)
Stock that is not delivered within its expiry date expressed as a percentage of demand.
Obsoletes (value)
The average weekly value of stock that is not sold before its expiry date.
Forecast error
The Mean Absolute Percentage Error is a measure of the forecast unreliability. It is determined by
specifying the absolute forecast error (demand minus forecast) on a weekly basis. The sum of the forecast
errors is then divided by the sum of the demand. A MAPE of 0% is the ideal, in which case the demand is
equal to the forecast. But if the MAPE is high then the forecast is unreliable.
Number of batches
Demand pattern
Bias (%)
The bias is calculated by evaluating the forecast of the previous round against the real demand in the
current round.
The bias is the relative difference between these components. In other words, it is the forecast minus
demand divided by demand. Using this definition, a positive bias means that the forecast was higher than
demand, a negative bias means that the forecast was lower than demand.
Either postive or negative biases are likely to lead to issues. A positive bias drives increased inventory.
Clearly this is due to the fact that the predicted requirement is higher than actual sales. As a result your
inventory cost will increase and potential for obsolescent products increases.
A negative bias on the other hand, can lead to low inventory covers, which may result in poor service
delivery.
40
The percentage of production orders of the finished product that has been completed according to the
production plan.
The Assignable Contribution Rate is the margin per hour. It is calculated by multiplying the gross margin
per unit with the bottling line speed (i.e. the number of units that can be produced each hour).
The On Shelf Availability (OSA) is a measure for the level availability of finished product on the retailer
shelf. The OSA will depend on the retailer, the product, and the service level delivered to the retailer's
D/C.
A high-end retailer will have many products per square meter of shelf space, resulting in a limited space
for any given product on shelf. The store inventory is then held in a 'back of store' (in story inventory
room elsewhere on the premises). If a product runs out on shelf replenishment from this 'back of store'
may not be in time. Especially high runners may suffer from this. Discounters will have less of an issue as
the full box of product will be in the shelf.
If your service to the retailer's D/C is too low, the stores themselves may not be replenished in time,
which may further hamper replenishment to shelf in store: a lower OSA results.
Start up loss
After each change over the speed of the filling line gradually builds up. During the start up of production
the line needs to be tuned. This results in a percentage of finished products that are irrevocably lost in
the first hour of production. These products cannot be sold and will therefore be scrapped.
Rejects
Directly after production the products are being checked by means of random sampling. If the quality of
the product is questionable in terms of taste or color, it is rejected and scrapped immediately. The quality
of the products is mainly dependent on the quality of the pulp being purchased.
CUSTOMER/PRODUCT
Customer/product report
The report containing the results regarding the sales of finished product to the customers.
Product/customer report
The report containing the results regarding the sales of finished product to the customers.
Total demand per week valued against the average sales price.
Sales price
41
The sales price attained from the customer. That is, the attained contract index multiplied by the basic
sales price.
Gross margin
Economic Inventory
Product inventory expressed in weeks forward cover. The is the amount of product physically in stock
plus planned production minus any backorders. So the inventory cover mainly depends on safety stock
level and production interval, which largely determine the total physical inventory, and the fixed period,
which drives the number of planned production batches.
The average percentage of the total shelf life that the customer receives.
The percentage of demanded units, that was satisfied through inventory or by the current production
schedule in time to satisfy the customers’ requested delivery dates and quantities.
The percentage of demanded order lines, that was satisfied through inventory or by the current
production schedule in time to satisfy the customers’ requested delivery dates and quantities.
On Shelf Availability
The On Shelf Availability (OSA) is a measure for the level availability of finished product on the retailer
shelf. The OSA will depend on the retailer, the product, and the service level delivered to the retailer's
D/C.
A high-end retailer will have many products per square meter of shelf space, resulting in a limited space
for any given product on shelf. The store inventory is then held in a 'back of store' (in story inventory
room elsewhere on the premises). If a product runs out on shelf replenishment from this 'back of store'
may not be in time. Especially high runners may suffer from this. Discounters will have less of an issue as
the full box of product will be in the shelf.
If your service to the retailer's D/C is too low, the stores themselves may not be replenished in time,
which may further hamper replenishment to shelf in store: a lower OSA results.
The number of additional items sold attributable to promotional campaigns as a percentage of the total
number of items sold. This concerns the so-called net promotion peak.
Bias (%)
42
The bias is calculated by evaluating the forecast of the previous round against the real demand in the
current round.
The bias is the relative difference between these components. In other words, it is the forecast minus
demand divided by demand. Using this definition, a positive bias means that the forecast was higher than
demand, a negative bias means that the forecast was lower than demand.
Either postive or negative biases are likely to lead to issues. A positive bias drives increased inventory.
Clearly this is due to the fact that the predicted requirement is higher than actual sales. As a result your
inventory cost will increase and potential for obsolescent products increases.
A negative bias on the other hand, can lead to low inventory covers, which may result in poor service
delivery.
CUSTOMER
Customer report
The report containing the aggregated results regarding the sales of finished product to customers.
Index based on the logistical performance with regard to the customer (so including a possible bonus or
discount).
The percentage of demanded units, that was satisfied through inventory or by the current production
schedule in time to satisfy the customers’ requested delivery dates and quantities.
The percentage of demanded order lines, that was satisfied through inventory or by the current
production schedule in time to satisfy the customers’ requested delivery dates and quantities.
The percentage of demanded orders, that was satisfied through inventory or by the current production
schedule in time to satisfy the customers’ requested delivery dates and quantities.
The On Shelf Availability (OSA) is a measure for the level availability of finished product on the retailer
shelf. The OSA will depend on the retailer, the product, and the service level delivered to the retailer's
D/C.
A high-end retailer will have many products per square meter of shelf space, resulting in a limited space
for any given product on shelf. The store inventory is then held in a 'back of store' (in story inventory
room elsewhere on the premises). If a product runs out on shelf replenishment from this 'back of store'
may not be in time. Especially high runners may suffer from this. Discounters will have less of an issue as
the full box of product will be in the shelf.
If your service to the retailer's D/C is too low, the stores themselves may not be replenished in time,
which may further hamper replenishment to shelf in store: a lower OSA results.
43
Revenue
The weekly revenue attained with this customer. That is to say, the total number of items sold multiplied
by the sales price. And that, of course, for the sum of all finished products.
Gross margin
Shipments
Order lines
Pallets
Days in warehouse
The average number of days that the finished product is in the finished goods warehouse before it is
delivered.
The average percentage of the total shelf life that the customer receives.
The report containing the results of the market forces per customer finished product combination
Volume factor
The percentage of customer market share growth or decline in the next round. Based on the results of
the previous round, customer market share can either increase or decrease. It depends on the team's
performance in relation to the performances of the other teams in the pool. The attained customer
contract indexes are compared. Better than average performing teams can win up to a total of 10%
customer market share. Worse than average performing teams can loose up to a total of 10%. Gains or
losses are always based on the initial volume settings of customers, not on their current volumes. In other
words, only a difference in volume factor between the previous round and the round before, indicates a
change in customer market share. This means the forecast needs to be reviewed too.
This report shows the change in market share per customer. The new market share is valid for the next
round, so the forecast can be adjusted if that needs to be done.
44
FAQ
A drum and an IBC both take the space of exactly one pallet location.
Can you maybe clarify where we can find the pallet and box quantities?
The pallet and box quantities can be found by clicking on the "Information" tab at the top of the screen.
This screen also includes other interesting information on number of pallets per truck etc.
The Bill of Materials can be found by clicking on the "Information" tab at the top of the screen. This
screen also includes other interesting information on number of items per pallet, pallets per truck etc.
The calculation model of The Fresh Connection uses working days, so a week contains 5 days.
How is the actual demand of any given customer of The Fresh Connection generated?
Customer demand depends on the decision you take as a team and the result generated in the previous
round. Most relevant are service level, OSA (On Shelf Availability level), promotional pressure and
potential relaunches. Other external factors may play a role, like changes in consumer preferences.
45