Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

EZ SPOT®

Pipe-Freeing Agent Product Data Sheet

Product
EZ SPOT® pipe-freeing agent can be mixed with base oil and water to rapidly create an invert emulsion that
Description
is an effective stuck pipe pill. EZ SPOT pipe-freeing agent lubricates and dehydrates filter cake from
water-based fluids to aid in breaking the cake apart to help alleviate differentially stuck drill pipe. EZ SPOT
pipe-freeing agent is preferred when a weighted spot is desired to match the system density and can be
weighted up with all common weighting agents. EZ SPOT pipe-freeing agent can also be used as a spacer
fluid between oil based drilling fluids and cement.

Applications / • Formulate a pill to help release differently stuck pipe


Functions • Helps prevent interfacial thickening of oil-based mud and cement during cementing
• Helps emulsify water into oil-based fluids

Advantages • Thermally stable at temperatures up to 400°F (205°C)


• Can be formulated with varying oil/water ratios
• Liquid concentrate for ease of addition
• Easily weighted with any weighting agent

Typical • Appearance Thick, brownish-green liquid


Properties • Flash point, PMCC 88°F
• Flash point, PMCC 31°C
• Specific gravity 0.98

Recommended
See the table for the amounts of EZ-SPOT pipe-freeing agent fluid concentrate for 100 bbl (16 m³) of
Treatment spotting fluid.

Packaging EZ-SPOT pipe-freeing agent is packaged in a variety of sizes including 15-gal (56.7-l), 55-gal (208-l) drums,
in bulk and others.

www.halliburton.com/baroid

Because the conditions of use of this product are beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser make its own test to determine the suitability for
purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or packaging or if damaged. Except for such replacement, seller is not liable
for any damages caused by this product or its use. The statements and recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.

EZ-SPOT is a registered trademark of Halliburton © 2010 Halliburton All Rights Reserved


3/26/2010
EZ SPOT Fluid : Spotting Fluid Formulation for 100 bbl (16 m³).

Density, lb/gal 7.3 10 12 14 16 18

Oil/Water Ratio 70/30 70/30 70/30 70/30 82/18 82/18

Base Oil, bbl 65 58 54 49 51 44

EZ-SPOT fluid, drum 6 6 6 6 6 6

Water, bbl 28 26 22 21 11 10

BAROID® material, 100 lb sacks (45.4 kg) --- 140 250 350 465 570

www.halliburton.com/baroid

Because the conditions of use of this product are beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser make its own test to determine the suitability for
purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or packaging or if damaged. Except for such replacement, seller is not liable
for any damages caused by this product or its use. The statements and recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.

EZ-SPOT is a registered trademark of Halliburton © 2010 Halliburton All Rights Reserved


3/26/2010

You might also like