Scribd Logo
Upload

Welcome to Scribd!

  • LH30 Datasheet

    Uploaded by

    Jimmy Floyd Hasselbaink
    58 views1 page
    This document provides specifications for the Switch-Tek High-Temp LH30 0504 DS1_0 horizontal high-temperature float switch. Some key details include: - It is designed for use in clean water, diluted chemicals, or petroleum liquids from -40°F to 300°F. - The float and stem are made of 316 stainless steel and it has a 1/2" NPT process mount. - It features a SPST reed contact rated up to 240VAC/VDC at 20VA with a selectable normally open or normally closed configuration. - The float switch provides a reliable interface for level monitoring in tanks with remote devices like PLCs or

    Original Description:

    Original Title

    LH30_datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the Switch-Tek High-Temp LH30 0504 DS1_0 horizontal high-temperature float switch. Some key details include: - It is designed for use in clean water, diluted chemicals, or petroleum liquids from -40°F to 300°F. - The float and stem are made of 316 stainless steel and it has a 1/2" NPT process mount. - It features a SPST reed contact rated up to 240VAC/VDC at 20VA with a selectable normally open or normally closed configuration. - The float switch provides a reliable interface for level monitoring in tanks with remote devices like PLCs or

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    58 views1 page

    LH30 Datasheet

    Uploaded by

    Jimmy Floyd Hasselbaink
    This document provides specifications for the Switch-Tek High-Temp LH30 0504 DS1_0 horizontal high-temperature float switch. Some key details include: - It is designed for use in clean water, diluted chemicals, or petroleum liquids from -40°F to 300°F. - The float and stem are made of 316 stainless steel and it has a 1/2" NPT process mount. - It features a SPST reed contact rated up to 240VAC/VDC at 20VA with a selectable normally open or normally closed configuration. - The float switch provides a reliable interface for level monitoring in tanks with remote devices like PLCs or

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Switch-Tek

    TM Switch-Tek High-Temp LH30 0504 DS1_0

    Horizontal High-Temp Float Switch

    Specifications
    Orientation: ± 20˚ vertical
    Accuracy: ± 3 mm in water
    Repeatability: ± 1 mm in water
    Specific gravity: 0.8 min.
    Contact type: (1) SPST reed
    Contact rating: 240 VAC/VDC @ 20 VA LH30-S301
    Contact output: Selectable NO/NC Normally Open
    Process temp.: F: -40˚ to 300˚
    Configuration
    C: -40˚ to 148.9˚
    Pressure: 300 psi max.
    (20.7 bar max.)
    Sensor rating: NEMA 4 (IP65) Description
    Sensor material: 316 ss The general purpose high-temp float level switch is an ideal choice for relatively
    Process mount: 1/2" NPT clean water, diluted chemical or petroleum based liquidsPower
    with non-coating and/
    Wire type: 2-wire, #22 AWG or scaling characteristics. Media examples include hot machine oil and pickling
    Supply
    Wire length: 24" (61 cm) solutions. The dry contact closure provides a reliable switch interface with
    Wire jacket mat.: Polymeric
    remote devices such as a PLC, SCADA or alarm. The sensor mounts horizontally
    Classification: General purpose
    through the side wall of the tank. The high temperature float switch is easily
    CE compliance: EN 50082-2 immunity
    EN 55011 emission configured for NO or NC states based on the installed orientation of the sensor
    EN 61010-1 safety and the resulting float movement relative to the liquid level. In a NO state, the
    float lowers with the liquid, and in a NC state, the float rises with the liquid.

    Features
    Dimensions 5.3"
    High temperature and pressure Power (135mm)
    Power
    Supply Supply
    316 SS float and stem design 1.6"
    (41mm)
    Dual threaded design for flexible
    inside-outSwitch-Tek
    or outside-in installation
    Horizontal High-Temp Float Level Switch
    LH30 Series
    20 VA dry contact with selectable
    NO or NC state via float orientation
    2' Cable (600mm) 0.6" (16mm)
    5/8" Dia. Ref.
    1/2" NPT Wrench
    Flat
    Power Power Power
    Supply Supply Supply

    N.O. - Dry N.O. - Wet N.C. - Dry N.C. - Wet

    Power Power Power Power


    Supply Supply Supply Supply

    Horizontal Float Ordering

    LH3 -S301 Ordering Notes


    (1) The normally open or closed contact output
    is selectable based on the installed 12:00 or
    Maximum pressure (1) 6:00 sensor orientation.
    0 300 psi (20.7 bar)
    Power Power Power
    Supply Supply Supply

    10500 Humbolt Street • Los Alamitos, CA 90720 • www.flowline.com • T (562) 598-3015 • F (562) 431-8507

    You might also like