Professional Documents
Culture Documents
Management Control Systems As A Package
Management Control Systems As A Package
2 AUTHORS:
Abstract
There has been very little explicit theoretical and empirical research on the concept of management control systems (MCS) as
a package despite the existence of the idea in management accounting literature for decades. In this editorial we discuss a range
of ways researchers have defined MCS and the problems this has created. We provide a new typology for MCS structured around
five groups: planning, cybernetic, reward and compensation, administrative and cultural controls. The typology is based on the
distinction between decision-making and control and addresses those controls managers use to direct employee behaviour. We
discuss the conclusions of the articles included within this special issue and provide ideas for further research.
© 2008 Elsevier Ltd. All rights reserved.
The idea of management control systems (MCS) operating as a package1 has existed for over 30 years (Otley, 1980)
and there have been regular calls to study the phenomenon (Chenhall, 2003; Dent, 1990; Fisher, 1998; Flamholtz et al.,
1985; Otley, 1980). Despite this there has been little explicit theorizing or empirical research on the topic (Abernethy
and Chua, 1996; Alvesson and Karreman, 2004; Simons, 1995).
There are a number of reasons why studying the MCS package phenomenon is important. Firstly, MCS do not operate
in isolation. While much of the MCS research considers single themes or practices that are seemingly unconnected
from each other and the context in which they operate, these invariably sit within a broader control system (Chenhall,
2003). This has several implications. For one, Fisher (1998) argued that if the links between various MCS are not
recognized, then the way in which the considered MCS components relate to studied contingent variables will lead to
erroneous conclusions. This idea is supported by Chenhall (2003) who warned that studying specific MCS elements
in isolation has “the potential for serious model under specification” (p. 131). This may provide the underlying reason
∗ Corresponding author at: Helsinki School of Economics, Runeberginkatu 22-24, 00100 Helsinki, Finland. Tel.: +358 9 43138472;
fax: +358 9 43138678.
E-mail address: [email protected] (T. Malmi).
1 As a general conception, a management control systems (MCS) package is a collection or set of controls and control systems. The individual control
systems may be more traditional accounting controls such as budgets and financial measures, or administrative controls, for example organisation
structure and governance systems, along with more socially based controls such as values and culture. Organisations may have numerous controls
present, and they all may be used to some extent to align individual’s activities with organisational goals (Abernethy and Chua, 1996; Alvesson and
Karreman, 2004; Flamholtz et al., 1985; Otley, 1980; Simons, 1995).
1044-5005/$ – see front matter © 2008 Elsevier Ltd. All rights reserved.
doi:10.1016/j.mar.2008.09.003
288 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
for Dent’s (1990) assessment of MCS contingency research when he argued that while some relationships have been
found between some contingency variables and MCS, on the whole the “relationships are weak and the conclusions
are fragmentary” (p. 10). In his more recent examination of contingency research, Chenhall (2003) supported Dent’s
(1990) point and argued that the variables considered have not provided consistent explanations of the kind of MCS
that fit organisation types or drive performance.
A second and related point is one that we argued in our call for papers for this special issue. Accounting researchers
have spent much time studying innovations in practice, such as activity-based costing/management (ABC/M), the
balanced scorecard (BSC), value-based management (VBM), rolling forecasting, and target costing, with the goal of
explaining their development, adoption, use and impact. However, studying these systems individually may influence
any conclusions we can draw, if the use and impact of a new MCS element is related to the functioning of the existing
broader MCS package.
Thirdly, a major focus of MCS theory is how to design MCS in order to produce the desired outcomes. While
much management accounting research has studied accounting-based controls and this is typically focussed on formal
systems, there is still limited understanding of the impact of other types of control (such as administrative or cultural)
and whether/how they complement or substitute for each other in different contexts. Gaining a broader understanding
of MCS as a package may facilitate the development of better theory of how to design a range of controls to support
organisational objectives, control activities, and drive organisational performance.
By taking a broader package approach to the study of MCS, researchers will be able to develop better theory of the
real impact of innovations such as the BSC, and how to design MCS packages. However, this raises questions about
the kinds of challenges which exist in the study of MCS as a package.
While there are good reasons to study MCS as a package there are a range of challenges in doing so; three of which
will be explained in this editorial. The first involves the difficulty of clearly defining the concept of MCS. This includes
making a distinction between MCS and information/decision-support systems. Furthermore, if we focus on control
rather than decision-support, what is it that MCS is supposed to control; is it human behaviour or artefacts, such as
cash or material flows; and at what level, the organisation, business unit, management, or individual?
When the definition parameters of MCS are set, the second issue arises of what conceptually constitutes an MCS
package; what is included, what is left out, and why? An analytical conception, which provides a sufficiently broad
yet parsimonious approach, is required to study the empirical phenomenon. In addition, while studies have looked at
control systems individually and at times in combination, the challenge is to understand how all the systems in an MCS
package operate as an inter-related whole. Abernethy and Brownell (1997) captured this issue in stating: “It is clear
that organisations rely on combinations of control mechanisms in any given setting, yet virtually nothing is known
about how the effects of any one control are governed by the level of simultaneous reliance on other forms” (p. 246).
Thirdly, there are challenges in empirically studying an MCS package as they are often very large and complex
systems. This creates difficulties in how field and/or case study researchers gather and make sense of the complexity that
exists in each of the elements of the MCS package and then report their findings in journal articles at a sufficient level
of abstraction to make the reading comprehensible. Furthermore, there are problems with how survey researchers test
the form of these large and complex packages across organisations so that systematic relationships can be established.
This includes the difficulty of developing survey instruments to capture the underlying phenomena in a meaningful
way as well as gathering adequately large samples.
The purpose of this editorial is to enlighten the abovementioned issues and lay a foundation to enable researchers to
continue developing research on MCS. The first issue to be addressed is what control is, and what is meant by MCS?
We will then introduce what we consider to be a comprehensive but parsimonious typology of an MCS package which
may be used to inform empirical work. Next we will discuss the four papers in this special issue including their overall
conclusions. Finally, the implications of these discussions for further research will be outlined.
3. MCS definition
The first challenge in undertaking research on MCS packages is the difficulty of defining what is meant by MCS
(Fisher, 1998). A number of definitions and descriptions of MCS exist; some of which contain overlaps, while others are
T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300 289
quite different from each other (Abernethy and Chua, 1996; Alvesson and Karreman, 2004; Anthony, 1965; Chenhall,
2003; Emmanuel et al., 1990; Fisher, 1998; Flamholtz et al., 1985; Green and Welsh, 1988; Langfield-Smith, 1997;
Merchant and Van der Stede, 2007; Otley and Berry, 1980; Ouchi, 1979; Simons, 1995).
Some authors have outlined very broad conceptions of what could be considered MCS. For example Chenhall (2003)
discussed management accounting (MA) which is a “collection of practices such as budgeting or product costing”,
management accounting systems (MAS) which is the “systematic use of MA to achieve some goal” and MCS which
“is a broader term that encompasses MAS and also includes other controls such as personal and clan controls”. He
also notes that the term organisational control “is sometimes used to refer to controls built into activities and processes
such as statistical quality control, just-in-time management” (p. 129). Merchant and Otley (2007) note that broader
conceptualizations of control can include factors such as strategic development, strategic control and learning processes,
all of which are typically beyond the scope of management accounting. In these conceptualizations “almost everything
in the organisation is included as part of the overall control system”2 (p. 785).
There are also narrower views of what constitutes MCS. Merchant and Van der Stede (2007) separate management
control from strategic control and define management control as dealing with employees’ behaviour. “It is people
in the organisation who make things happen. Management controls are necessary to guard against the possibilities
that people will do something the organisation does not want them to do or fail to do something they should do. . .If
all employees could always be relied on to do what is best for the organisation, there would be no need for MCS”
(p. 8). Abernethy and Chua (1996) employ the same line of argument in defining an organisational control system
as comprising “a combination of control mechanisms designed and implemented by management to increase the
probability that organisational actors will behave in ways consistent with the objectives of the dominant organisational
coalition” (p. 573).
Some authors move beyond behavioural control and see controls as the means to achieve goal congruence. Flamholtz
et al. (1985) defined organisational controls as: “attempts by the organisation to increase the probability that individuals
and groups will behave in ways that lead to the attainment of organisational goals (p. 36). They proceeded to define
organisational control systems as “techniques and processes to achieve goal congruence which may be designed for
all levels of behavioural influence: individuals, small groups, formal subunits and the organisation as a whole” (p.
36). Note that their definition of organisational control is much broader than their definition for organisational control
systems. The former allows many different types of controls (e.g. rules), whereas the latter definition is focused only
on those systems that aim for goal congruence.
The lack of clarity, wide variation and inconsistencies in how MCS have been conceptualized has created a num-
ber of problems in MCS research in regards to the interpretation of research results and the design of MCS. For
example, many commonly studied contingency factors may imply different things for different types of accounting
systems and controls. To illustrate, environmental uncertainty may require broad scope information (i.e. more than
financial information) to provide a multifaceted picture of reality to enable decision-making. This suggests more
extensive use of accounting under environmental uncertainty. However, from a behavioural perspective, environmen-
tal uncertainty may require agile organisations with considerable employee empowerment and thus, less extensive
use of accounting controls under these very same circumstances of environmental uncertainty. Therefore, a con-
tingent factor (such as an uncertain environment) can potentially have very different impacts on the accounting
systems depending on whether the system is used for decision-making or control. Building a cumulative body of
knowledge about the design and use of MCS becomes difficult without well-articulated definitions and purposes of
MCS.
Future research needs to be more explicit about the kind of controls it addresses. The definitions of Abernethy and
Chua (1996), Flamholtz et al. (1985), Merchant and Van der Stede (2007) and Ouchi (1979) are based on the assumption
that someone (senior manager/top management team/dominant coalition) is seeking to control the behaviour of others
(middle management, employees).3 However, excluding the Flamholtz et al. (1985) definition of organisational control
systems, these remaining definitions can easily accommodate both systems that senior managers use to influence
2 This ‘including almost everything’ approach becomes more understandable when we look at the various ways researchers have stated the purpose
of MCS, or what organisations aim to achieve with controls. Merchant and Otley (2007) argue that “in broad terms, a management control system
is designed to help an organisation to adapt to the environment in which it is set and to deliver the key results desired by stakeholder groups” (p.
785) and “keep organisations reliably on track” (p. 786).
3 This can easily be extended to partners and other actors in networks, value-chains, etc.
290 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
the behaviour of junior managers or employees, as well as the systems senior managers create to allow efficient
decision-making either by themselves or at more junior levels.
One potentially useful distinction advocated by Zimmerman (1997, 2001) is between decision-making and control.
There are some accounting systems in organisations that are focused on providing information to support decision-
making and others that direct employee activities or behaviour. Managers may employ systems to support their own
decision-making activities, such as trying to influence machine utilization or cash flows. Alternatively, managers may
employ these information systems to support decision-making by their sub-ordinates. However, if no mechanisms exist
to monitor subordinate managers’ goal congruence and behaviour, then the system is a decision-support or information
system, rather than a control system. Therefore, managers may make a difference in the organisation by making
decisions themselves, or getting their subordinates to make the ‘right’ decisions. However, unless the support system
is used by an individual (manager) to guide another’s (subordinate) behaviour, then it is a decision-support system,
regardless of whether it is used by senior managers or provided by senior managers for their subordinate managers.
Our suggestion to clarify these issues is to start with the managerial problem of directing employee behaviour. Those
systems, rules, practices, values and other activities management put in place in order to direct employee behaviour
should be called management controls. If these are complete systems, as opposed to a simple rule (for example not to
travel in business class4 ), then they should be called MCSs. Accounting systems that are designed to support decision-
making at any organisational level, but leave the use of those systems unmonitored, should not be called MCSs and
instead termed management accounting systems.
This definition is broader than those aiming for goal congruence or motivation, as goal congruence excludes a number
of ways superiors may attempt to influence the behaviour or subordinates—such as explicit rules.5 It is also different
and broader than the definition provided by Simons (1995: p. 5), who said: “MCSs are the formal, information-based
routines and procedures managers use to maintain or alter patterns in organisational activities”. Simons argues that these
information-based systems become control systems when they are used to maintain or alter patterns in organisational
activities. If not used for this purpose they are not control systems, but information for decision-making. Simons’
definition is akin to our suggestion above, except for its narrow focus on information-based routines. Conversely,
our suggestion is much narrower than Chenhall’s (2003) view, as accounting systems designed and/or used only for
decision-support are excluded.
We suggest the use of the concept of management controls/MCS, rather than organisational controls/organisational
control system. In this way organisational controls could include controls that are not only directed at employees, such
as quality and inventory controls. Note that this idea of management control is also broader than the conceptualization
suggested by Anthony (1965), as included strategic and operational controls aimed at directing employees lie outside
the scope of Anthony’s definition.
These distinctions are often more analytically than empirically separable. Take for example, planning. Most of
us would probably argue that planning is done to decide ex ante the direction we should take, yet planning also
has another role. People involved in planning activities are more likely to buy into those plans and to execute them.
Hence, depending on how it is done, planning can accomplish two tasks; the first of these being to support ex-ante
decision-making. If this is the only purpose of the planning it should not be called a MCS. Alternatively, planning
could also be an integral part of the system that creates goal congruence within organisations and therefore, deserves
to be labelled as a MCS. Another commonly used concept open to conflicting interpretations is “cost control”. This
may mean that an entrepreneur controls her/his own expenses, or a large organisation creates a new costing system
to support decision-making. Conversely, it may mean that senior managers restrict travelling in the hope of saving
money or that a superior requires subordinates to report on costs relative to the budget. This reporting requirement, or
accountability, may cause the subordinates to control costs by themselves. So the term cost control can refer to various
types of mechanisms and activities within organisations. However, only the last two examples of cost control would
classify as management controls or MCS, as managers use them to influence employee behaviour and such use extends
beyond providing better information for decision-making.
As such, management controls include all the devices and systems managers use to ensure that the behaviours
and decisions of their employees are consistent with the organisation’s objectives and strategies, but exclude pure
decision-support systems. Any system, such as budgeting or a strategy scorecard can be categorised as a MCS. The
term ‘package’ is employed because in most contemporary organisations there are a number of MCS. If all those were
designed and coordinated intentionally, we might call the whole system a MCS.6 However, the concept of a package
points to the fact that different systems are often introduced by different interest groups at different times, so the
controls in their entirety should not be defined holistically as a single system, but instead as a package of systems.
With this clearer definition of the parameters of MCS, the second issue of what conceptually constitutes an MCS
package can now be considered. Based on the work of Brown (2005), Table 1 and Fig. 1 provide a conceptual typology
of an MCS package. The typology was developed by analysing and synthesising nearly four decades of MCS research
(for examples and reviews see Chenhall, 2003; Fisher, 1995, 1998; Flamholtz et al., 1985; Langfield-Smith, 1997; Otley,
1980; Simons, 1995). This analytical conception of MCS as a package provides a sufficiently broad, yet parsimonious,
approach for studying the phenomenon empirically. Its aim is to facilitate and stimulate discussion and research in this
area, rather than suggesting a final solution to all related conceptual problems. To illustrate its strengths, in the following
discussion we compare our typology with the prominent ‘object of control’ framework proposed by Merchant and Van
der Stede (2007). In considering this typology it must always be recognised that it is a broad model of an organisation’s
MCS package and many of the individual controls have significant research streams associated with them. The strength
of the typology lies in the broad scope of the controls in the MCS as a package, rather than the depth of its discussion
of individual systems. There are five types of controls in the typology; planning, cybernetic, reward and compensation,
administrative and cultural controls.
Planning is an ex ante form of control (Flamholtz et al., 1985). Firstly, it sets out the goals of the functional areas of
the organisation, thereby directing effort and behaviour. Secondly, it provides the standards to be achieved in relation to
the goals, and clarifies the level of effort and behaviour expected from organisation members. Furthermore, planning can
enable co-ordination through aligning a set of goals across the functional areas of an organisation, thereby controlling
the activities of groups and individuals to ensure they are in line with desired organisational outcomes. In relation to
planning, there are two broad approaches. The first is action planning, in which the goals and actions for the immediate
future, usually a 12-month period or less, are established. This has a tactical focus. The second broad approach is
long-range planning, in which the goals and actions for the medium and long run are established. This has a more
strategic focus.
Merchant and Van der Stede (2007) present planning and budgeting together as the financial results control systems.
However, planning can be done with little reference to finance. In strategic planning, management can create strategic
projects and other initiatives, all of which may be effective in directing what people do. Similarly, operational planning
6 Merchant and Van der Stede (2007: p. 15) suggest that the collection of control mechanisms should be called an MCS.
292 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
Table 1
Description of MCS package.
Elements Description Components
Planning Ex-ante form of control (Flamholtz et al., 1985); first it sets Action planning—goals and actions for the immediate
out the goals of the functional areas of the organisation future, usually a 12-month period, are established; has a
thereby directing effort and behaviour; second, it provides tactical focus. Long-range planning—the goals and
the standards to be achieved in relation to the goal, making actions for the medium and long run are established; has
clear the level of effort and behaviour expected; third, it a more strategic focus
enables congruence by aligning goals across the functional
areas of an organisation, thereby controlling the activities of
groups and individuals.
Cybernetic There are five characteristics of cybernetic control (Green Budgets (Bunce et al., 1995; Hansen et al., 2003),
and Welsh, 1988). First, there are measures that enable Financial measures (Ittner and Larcker, 1998),
quantification of an underlying phenomenon, activity or Non-financial measures (Ittner and Larcker, 1998),
system. Second, there are standards of performance or Hybrids that contain both financial and non-financial
targets to be met. Third, there is a feedback process that measures such as the Balanced Scorecard (BSC)
enables comparison of the outcome of the activities with the (Greenwood, 1981; Kondrasuk, 1981; Ittner and
standard. This variance analysis arising from the feedback Larcker, 1998; Kaplan and Norton, 1992, 1996a,b,
is the fourth aspect of cybernetic control systems. Fifth is 2001a,b; Malina and Selto, 2001)
the ability to modify the system’s behaviour or underlying
activities.
Reward/compensation Motivating and increasing the performance of individuals Attaching rewards and or compensation to achievement
and groups through attaching rewards to control effort of goals (Flamholtz et al., 1985; Bonner and Sprinkle,
direction, effort duration, and effort intensity. 2002)
Administrative Administrative control systems are those that direct Organisational design and structure (Otley and Berry,
employee behaviour through the organizing of individuals 1980; Emmanuel et al., 1990; Abernethy and Chua,
(organisation design and structure), the monitoring of 1996; Alvesson and Karreman, 2004), Governance
behaviour and who employees are made accountable to for structures within the firm (Abernethy and Chua, 1996),
their behaviour (governance); and through the process of Procedures and policies (Macintosh and Daft, 1987;
specifying how tasks or behaviours are to be performed or Simons, 1987)
not performed (policies and procedures), (Simons, 1987).
Culture The values, beliefs and social norms which are established Value-based controls (Simons, 1995), Clan controls
influence employees behaviour. (Birnberg and Snodgrass, (Ouchi, 1979), Symbols (Schein, 1997)
1988; Dent, 1991; Pratt and Beaulieu, 1992).
often comprises task lists, which provide guidance on what to do, perhaps without clear link to finance and accounting.
As planning may have a major role in directing employee behaviour, we treat it as a separate system in our MCS
typology. It is important for researchers to understand whether planning is done simply to decide on future activities
or whether the process involves building employees’ commitment to these plans.
Cybernetic principles have had a long association with the concept of control (Arrow, 1964; Daft, 1983; Koontz and
O’Donnel, 1968; Mintzberg, 1979; Strank, 1983). Green and Welsh (1988) defined cybernetic control as “a process in
which a feedback loop is represented by using standards of performance, measuring system performance, comparing
that performance to standards, feeding back information about unwanted variances in the systems, and modifying
the system’s comportment” (p. 289). In organisations a cybernetic system can either be an information system or
control system contingent upon how it is used. A cybernetic system would be an information and decision-support
system if managers themselves detected unwanted variances and modified their underlying behaviour or activity that
influenced the variance (for example in a production process) without anyone else’s involvement. However, the linking
of behaviour to targets, and the establishing of accountability for variations in performance takes a cybernetic system
from being an information system to support decisions, to a MCS.
There are four basic cybernetic systems that have been identified in MCS research that will be considered in this
typology: budgets (Bunce et al., 1995; Hansen et al., 2003); financial measures (Ittner and Larcker, 1998); non-financial
measures; and finally hybrids that contain both financial and non-financial measures—e.g., the Balanced Scorecard
T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300 293
(BSC) (Greenwood, 1981; Ittner and Larcker, 1998; Kaplan and Norton, 1992, 1996a,b, 2001a,b; Kondrasuk, 1981;
Malina and Selto, 2001).
Budgeting is central to, and the foundation of, MCS in most organisations and its use is almost universal (Bunce et al.,
1995). This is due to its “ability to weave together all the disparate threads of an organisation into a comprehensive plan
that serves many different purposes, particularly performance planning and ex post evaluation of actual performance
vis a vis the plan” (Hansen et al., 2003; p. 96). While budgeting may have a number of uses, including integration of
processes and resource allocation decisions, as a control mechanism its focus is on the planning acceptable levels of
behaviour and evaluating performance against those plans.
A common form of control is holding employees accountable for specific financial measures. Some of these financial
measures may be related to the budgeting process through using information contained in the budget. However, the
budget is not the same as a financial performance measurement system—the budget is a broad, complete technique,
whereas financial performance measures can be used in a narrow simple fashion in target-setting. Examples of financial
performance measures would include return on investment and economic value added (EVA).
Non-financial measures are becoming an increasingly important part of MCS within contemporary organisations
and they may be used to overcome some of the perceived limitations in financial measures and to identify the drivers
of performance. They may also be the result of using other management initiatives, such as TQM (Ittner and Larcker,
1998). Finally, hybrid performance measurement systems contain both financial and non-financial measures. Hybrid
forms of performance measurement have been in use for some time, with the earlier approaches including such systems
of management by objectives (MBO) (Greenwood, 1981; Kondrasuk, 1981). In more recent times the BSC, which is a
comprehensive MCS with both financial and non-financial performance measures, has become quite dominant (Ittner
and Larcker, 1998; Kaplan and Norton, 1992, 1996a,b, 2001a,b; Malina and Selto, 2001).
Reward and compensation systems focus on motivating and increasing the performance of individuals and groups
within organisations by achieving congruence between their goals and activities and those of the organisation (Bonner
and Sprinkle, 2002). The basic argument is that the presence of rewards and compensation lead to increased effort, as
compared to an absence of explicit rewards and compensation (Bonner and Sprinkle, 2002).
While reward systems can range from extrinsic to intrinsic (Flamholtz et al., 1985), management accounting
research has largely focused on extrinsic rewards (Ittner and Larcker, 2001). Bonner and Sprinkle (2002) reviewed
the research literature on incentives and performance, and they argued that monetary incentives increase effort
and performance through focusing individuals efforts on the task. The linking of effort to the task can impact on
performance in three ways: effort direction, i.e. the tasks individuals focus on; effort duration, i.e. how long indi-
viduals devote themselves to the task; and effort intensity, i.e. the amount of attention individuals devote to the
task.
Reward and compensation systems are a separate element in our typology. Although rewards are often linked to
cybernetic controls, organisations also provide rewards and compensation for other reasons. These include retaining
employees and encouraging cultural control, via group rewards. Therefore, there is a need for research to consider
alternative reward and compensation schemes, their intended purposes, and their links to various controls.
Administrative control systems direct employee behaviour through the organizing of individuals and groups, the
monitoring of behaviour and who you make employees accountable to for their behaviour, and the process of specifying
how tasks or behaviours are to be performed or not performed. We consider three groups of administrative controls;
organisation design and structure (Abernethy and Chua, 1996; Alvesson and Karreman, 2004; Emmanuel et al., 1990;
Otley and Berry, 1980), governance structures within the firm (Abernethy and Chua, 1996), and the procedures and
policies (Macintosh and Daft, 1987; Simons, 1987).
Organisational design can be an important control device, as by using a particular structural type an organisation
can encourage certain types of contact and relationships (Abernethy and Chua, 1996; Alvesson and Karreman, 2004;
Emmanuel et al., 1990). Flamholtz (1983) argued that organisational structure is a form of control which works
through functional specialization, and contributes to control through “reducing the variability of behaviour and, in turn,
294 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
increasing its predictability” (p. 158). Although many researchers consider organisational design to be a contextual
variable, and not part of organisational controls, we include it as it is something managers can change, as opposed to
something that is imposed on them.
The governance structure relates to the company’s board structure and composition, as well as its various management
and project teams. Governance includes the formal lines of authority and accountability (Abernethy and Chua, 1996),
as well as the systems which are in place to ensure that representatives of the various functions and organisational
units meet to co-ordinate their activities both vertically and horizontally. Meetings and meeting schedules, for example,
create agendas and dead-lines which direct the behaviour of organisation members. As the governance structure can
be designed in many ways in any given organisation, researchers should not group them together, but instead study
how they link to each other and to other controls.
The use of policies and procedures is the bureaucratic approach to specifying the processes and behaviour within
an organisation. Policies and procedures include such approaches as standard operating procedures and practices
(Macintosh and Daft, 1987) and rules and policies (Simons, 1987). Policies and procedures include what Merchant and
Van der Stede (2007) call action controls, i.e. behavioural constraints, pre-action reviews, and action accountability.
As Merchant and Van der Stede’s (2007) action controls constitute only part of what we have labelled administrative
controls, our typology provides a more complete conception of the administrative tools managers use to control
behaviour, as compared to their object of control framework.
Flamholtz et al. (1985) defined organisational culture as “the set of values, beliefs and social norms which tend to
be shared by its members and, in turn, influence their thoughts and actions” (p. 158). This view of culture is supported
by a range of accounting-related research (Birnberg and Snodgrass, 1988; Dent, 1991; Pratt and Beaulieu, 1992).
While culture may exist as a context for an organisation and may at times be beyond the control of managers (Clegg et
al., 2005), culture is nonetheless a control system when it is used to regulate behaviour. We consider three aspects of
cultural control; value-based controls (Simons, 1995), symbol-based controls (Schein, 1997), and clan controls (Ouchi,
1979).
Simons (1995) developed the concept of value controls through what he described as belief systems. These are
defined as “the explicit set of organisational definitions that senior managers communicate formally and reinforce
systematically to provide basic values, purpose, and direction for the organisation”. These organisational definitions
espouse the “values and direction that senior managers want subordinates to adopt” (p. 34), while mission statements,
vision statements, credos and statements of purpose, are examples of belief systems which convey values (Simons,
1994).
The impact of values on behaviour, institutionalized through belief systems, works on three levels. The first is
when organisations deliberately recruit individuals that have particular types of values which match with those of the
organisation.7 The second is when individuals are socialized and have their values changed to fit the organisational
values (see Alvesson and Karreman, 2004). The third is when values are explicated and employees behave in accord
with them, even if they do not adhere to them personally. For example, Johnson and Johnson have a CREDO,8 or
value statement, that outlines their organisational values. This includes issues such as their community responsibilities.
Employees may behave in accord with this value statement because it has been personalized by them, or because it is
expected by the organisation. In either case, the value is designed to impact employee behaviour.
Symbol-based controls are when organisations create visible expressions, such as building/workspace design and
dress codes, to develop a particular type of culture (Schein, 1997). For example, an organisation may create an open
plan office to create a culture of communication and collaboration in an attempt to control behaviour. Similarly, an
organisation may require staff to wear a uniform (such as a flight steward) in order to create a culture of professionalism.
Drawing on a history of cultural research, Dent (1991) argues that there are distinct subcultures within organisations
and this claim is supported by Clegg et al. (2005). These subcultures or micro-cultures or individual groups can be
labelled as clans. Ouchi (1979) developed the concept of a clan in control research. His concept rests upon the idea
that individuals are exposed to a socialization process that instils in them a set of skills and values. This socialization
process may relate to groups, such as professions (i.e. doctors or accountants), or groups within organisations which
form some other kind of boundary, such as an organisational unit or division. Clan controls work by establishing values
and beliefs through the ceremonies and rituals of the clan.
Merchant and Van der Stede (2007) discuss personnel controls. These include selection and placement, training
and job design, as well as provision of the necessary resources. We include selection (and known selection criteria)
under cultural controls. Conversely, placement can be associated with organisational, and occasionally with governance
structure. Training can be included in administrative controls, as this typically involves teaching individuals to follow
the specified policies and procedures. Training can also be included in cultural controls as training can be seen as a
way of managing organisational culture. Job design can be considered an administrative control, whereas the provision
of the necessary resources is not really a control mechanism; it is merely a prerequisite for proper work and does not
provide direction as such. The provision of resources can be linked back to providing sufficient information to allow
proper decision-making.
Returning to the typology represented in Fig. 1. Cultural controls are pictured at the top to indicate that they are
broad, yet subtle controls. They are assumed to be slow to change, thus, providing a contextual frame for other controls.
In the middle of the figure are the planning, cybernetic, and reward and compensation controls. These are assumed to be
tightly linked in many contemporary organisations, and are presented in temporal order from left to right. At the bottom
are administrative controls which create the structure in which planning, cybernetic, and rewards and compensation
control are exercised.
While a number of conceptions of an MCS package have appeared in accounting research over the last three decades
(for example, Fisher, 1995; Flamholtz et al., 1985; Otley, 1980; Simons, 1995), they either omit key MCSs that managers
have available to them, or do not make a sufficiently clear distinction between decision-support systems and MCS.
Our proposed typology starts from the idea that control is about managers ensuring that the behaviour of employees
(or some other relevant party, such as a collaborating organisation) is consistent with the organisation’s objectives and
strategy. It is structured around how control is exercised and, as such, it broadly maps the tools, systems and practices
managers have available to formally and informally direct employee behaviour. In establishing the tools and systems
managers have available to direct behaviour, our typology contains more recent developments in MCS design (such
as hybrids like the BSC), and includes forms of control that have received less attention in empirical research, such as
cultural control.
Some MCS typologies start from a principle that all MCS operate under the cybernetic principle. While we recognise
that cybernetic control is important in an MCS package (and we are specific about the types of cybernetic controls
available), we include other forms of control available to managers, such as administrative controls. Furthermore, our
typology includes organisational structure. Many accounting researchers have treated this as a contingent variable, but
we consider it to be a control mechanism; as it is something managers can use and alter in the process of control.
A number of MCS typologies are not clear about the difference between information systems for decision-making
and MCS. We exclude pure decision-support systems. While information systems may have an influence on behaviour,
they are not specifically designed to hold organisation members accountable for their behaviour, nor do they relate
behaviour to targets.
An MCS typology, such as the one presented in this paper, cannot be too narrow as there is a risk that some controls
may go unnoticed and existing links to other controls may obscure the research findings. Conversely, a typology needs
to be parsimonious enough to create boundaries for an empirical inquiry. We hope that the typology set out in Fig. 1
will help researchers to question the potential linkages between systems and will stimulate discussion and research in
this area. Over time, further research should reveal the missing and unnecessary elements in it.
5. Paper reflections
When we first decided to send out the call for papers for this special issue we were motivated by the fact that little
empirical research has addressed the issue of MCS as a package of controls, and this contrasted with the research
experiences of ourselves and others, which suggested that organisations use large and complex combinations of MCS.
296 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
We believe that the three papers we have selected after the review process, together with the Kennedy and Widener9
paper which was submitted to Management Accounting Research as a regular submission, provide a good start for
considering this issue in more depth, and demonstrate that we need to do a lot more empirical and conceptual work on
the phenomenon.
Kennedy and Widener provide a case study of the control package used in a lean manufacturing environment. They
find that accounting practices mediate the relation between the lean manufacturing initiative and the rest of the MCS
package, which includes performance measurement systems, operating rules and procedures, as well as social controls.
A key outcome from their research was that the organisation had a large and complex control package that resembled
a configuration fit of controls. Furthermore, they found that the elements of the MCS package were related in a system
of multiple unidirectional and bi-directional relations. Through these findings Kennedy and Widener add to the body
of MCS package research. They also contribute by considering the relationship between a more operational level of
strategy (lean manufacturing) and the MCS package; an issue which has received little attention in MCS literature.
Sandelin undertakes a case study on the MCS package in a growth firm and examines two different MCS packages
in the face similar contingent factors. He has a number of interesting findings, including support for Kennedy and
Widener’s conclusion that the MCS package forms a configuration. Furthermore, in Sandelin’s case the form of the
MCS package is influenced by functional issues rather than contingent factors. He finds that the two control package
configurations possess the characteristics of equifinality, which means that the while the MCS packages may look
quite different, they both produce an equally good outcome. However, while two MCS packages may possess this
equifinality, their functionality seems to depend on internal consistency between elements. Therefore, two packages
may have contrasting elements, yet do the same job, as a result of internal consistency between the chosen elements in
each of the packages.
The next two studies both consider a context outside of the traditional organisational structure. Langfield-Smith
studies the start-up and interim phases of a collaborative alliance with five partners in the construction industry,
examining how the partners’ perceptions of trust impact control package design and use. The setting was characterized
by high levels of risk, high levels of both environmental and behavioural uncertainty, and a high number of transactions.
Langfield-Smith finds that governance structures and the array of MCS were complemented by trust in order to manage
this highly uncertain setting. Furthermore, the managers’ perceptions of goodwill and competence trust impacted the
choice of alliance structure and the control systems. It is clear from this paper that cultural controls are an important
aspect of an MCS package in a collaborative setting.
Van der Meer-Kooistra and Scapens examine the idea of lateral relations between and within organisations in order
to develop a framework for designing control mechanisms in such contexts. A key distinction between traditional
approaches and newer organisational forms, such as collaborations, is the need for cooperation and coordination,
rather than the traditional hierarchical command and control approach. Van der Meer-Kooistra and Scapens argue
that there is a need to balance the flexibility needed to deal with environmental uncertainty with firmness needed to
ensure the efficiency and standardization of operations. They argue that this need to balance firmness and flexibility
requires minimal structures to enable activities to take place. They extend the work of Kamoche and Cunha (2001)
who discuss the social and technical structure, by adding the institutional and economic structure. These underlying
structures, which are dynamic over time, provide the basis upon which to design the governance (or control) systems
for the lateral relations.10 They group governance practices into hierarchical, relationship and market practices, and
they study two types of relations; between organisations and within organisations. They found that the package of
governance practices, underpinned by the social, technical, institutional and economic structures, provided ‘firmness’
in the relationship, while still allowing ‘flexibility’ in facing the changing and uncertain context.
Considering this set of papers holistically raises a number of potential research opportunities. Firstly, the way in
which each of the authors conceptualized the MCS package in their studies was quite different, which meant that trying
to establish a coherent set of findings is challenging. For example, while there is some evidence that configurations
9 The Kennedy and Widener paper was not originally submitted as a response to the call for papers for this special issue. However, the paper was
so well fitted to the theme of the special issue that the editor and authors decided to include it.
10 Van der Meer-Kooistra and Scapens prefer the word governance, rather than control, as it is broader than the idea of control and recognizes that
power may be balanced among a number of interest groups when relations between these groups are lateral rather than hierarchical; consequently
control is not exercised in a traditional sense.
T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300 297
of control may exist and may possess the characteristic of equifinality, there is no consistent typology of the MCS
package which would enable us to compare these configurations across the four papers and compare the influences on
these configurations so that we can begin building a more coherent theory.
Kennedy and Widener provide some initial evidence of the relationship between systems in a package. However,
this could be extended by explicating how the systems in an MCS package actually relate to each other. While they
talk about systems being coupled, what does this actually mean, and what time period does this coupling operate over?
We discuss this issue in more detail below.
While Van der Meer-Kooistra and Scapens begin developing the idea of structures, more work is required to
investigate the aspects of this model which function as structuring mechanisms; which of the four structures provide
a background for governance or control, and in what contexts; which structures actually operate as control systems
used by managers; which operate as information systems; and which are the operational processes of the organisation
and/or relationship.
In the following section we will extend these issues along several themes and provide more direction on what
requires further study and how this may be achieved.
6. Research opportunities
While the five groups of controls in our MCS package individually perform the function of controlling the behaviour
of employees, it is important that they are understood as a package. We will outline some of the major opportunities for
research along two main themes. The first is the configuration of an MCS package, and the second is how the systems
within the package relate to each other. Both configurations and linkages between systems need to be addressed against
the outcomes and/or performance they produce.
The first theme relates to what is actually contained in MCS packages within organisations. MCS research has
provided much information about the operation of many of these systems individually; however, at this time we know
very little about how these systems are actually configured as a package across organisations. Are there particular
configurations, either broad or narrow, that systemically exist in specific settings? For example, do specific types of
cybernetic controls generally exist with specific types of administrative or cultural controls? Are there different kinds of
functional demands, settings and/or contingency factors that impact the form of the control package configuration and
its effectiveness? If we broaden the concept of performance from maximizing shareholder wealth, and begin thinking
about satisfying a broader set of stakeholders (such as environmental and social stakeholders), is there a particular
configuration that enables these broader notions of performance to be managed? As the environments within which
organisations exist are in a state of constant change, which of all the elements in the MCS package are the ones which
have to fit best, and which are less essential for maintaining control and gaining superior performance? Moreover, are
there equally effective configurations? This important question of equifinality is discussed in the paper by Sandelin
in this special issue. Furthermore, as the papers by Van der Meer-Kooistra and Scapens and Langfield-Smith (also in
this special issue) indicate, relationships with external actors also need to be controlled. Thus, the package of controls
which is likely to be the most effective in the different types of relationships and settings is an important and pressing
issue for the business community.
As suggested in the introduction, accounting researchers spend much of their time studying innovations in practice,
such as the BSC or VBM. When these new management techniques are added to a package of controls, how do they
impact on the package as a whole, and does the configuration of the control package impact the development, adoption,
effectiveness and use of new techniques?
As research progresses in this area there is a need to refine and develop both conceptual typologies and the constructs
contained in those typologies. Empirical researchers may find that some controls are unnecessary for understanding
organisational behaviour, and other research may uncover new controls which can then be added to the theory of MCS.
A second and related theme is how the elements within a control package relate to each other. Currently we have
very little theory that enables researchers to establish the relationships between the systems in a control package. An
obvious question is whether the effectiveness of each control system is dependant on the existing configuration of the
package? For example, misalignments between performance measures and the organisational structure used to group
activities and tasks, or between the incentive systems and the performance measures, may result in ineffective control.
When researchers study the impact of particular performance measures they might conclude that they are ineffective
per se, when it is the misfit with other elements of the control package that is the problem. Furthermore, suppose two
298 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
forms of cybernetic control, such as a budget and a BSC, are coupled with a particular organisational structure. A
researcher may study the effectiveness of the BSC and conclude that it is successful. However, it may be the budget
that is actually driving performance. By examining all the elements in the package, and the relationships between them,
we are more likely to get a better understandings of the effectiveness of the individual elements.
A long standing question, relating to how systems relate to each other, is whether specific types of control systems
operate as substitutes and complements (e.g. Abernethy and Chua, 1996; Chenhall, 2003). We believe that by looking at
the MCS as a package and considering the characteristics of particular elements in the various control systems (such as
whether cybernetic systems substitute for each other and complement the administrative systems), and examining the
way systems are used, we may find clues about how the different control systems act as substitutes and complements
in practice.
Large organisations, such as multinational corporations, typically have a multi-layered organisational hierarchy. One
ambiguous issue is how the elements of a control package relate to each other down the organisational levels? It would
seem likely that at the various organisational levels emphasis would be give to different control systems. At the very
senior management level in large organisations there are seldom many procedure-based controls. Conversely, policies
and procedures may dominate at the shop-floor level. Not only is it unclear how the control package is configured at the
different organisational levels, but we also do not know whether these different configurations have an impact on each
other. A related issue is how systems in a control package relate to each other across organisational units. Contingency
research has provided some clues about the types of control systems that fit with underlying task characteristics.
However, large organisations often have numerous task-types with quite different characteristics (e.g. marketing tasks
compared to production tasks). Are the same systems used across all organisational subunits or are different control
systems used in different subunits? If the latter, then how do these different systems impact each other? Furthermore,
do these different systems relate to each other in a consistent way, or are there lagged or intermittent effects? And
finally, do different configurations produce different outcomes?
One way to begin addressing these questions would be to develop an analytical approach for studying the way in
which the elements are interrelated. Orton and Weick (1990) have raised some interesting ideas about the different
types of coupling and the underlying characteristics that produce these different types. It might be fruitful to try to
follow a similar approach in developing new ways of analyzing and describing the linkages between the elements in the
MCS package. With more refined conceptual and analytical approaches, case studies could be conducted in a range of
theoretically different contexts, and this could provide inductively developed theory as a basis for larger cross-sectional
studies. Furthermore, longitudinal studies could also be conducted to uncover lagged and more intermittent effects.
Finally, as MCSs operating as packages are large and complex phenomena, larger research teams and research
programs are likely to be needed to study these issues. As well as the conceptual development of frameworks and
constructs, we see longitudinal case studies and large-sample empirical studies as necessary. However, it may be
necessary to use interviews to collect large datasets, rather an questionnaire surveys, in order to guarantee data quality.
It is also important that we do not assume that the existing configurations and linkages are somehow optimal, as this
is something which requires careful study.
Acknowledgments
We would like to gratefully acknowledge the comments provided by David Bedford, Paul Brown, Isabella Grabner,
Markus Granlund, Seppo Ikäheimo, Katja Kolehmainen, Taru Lehtonen, Mikko Sandelin, Bob Scapens, Heidi Sundin,
Nicole Sutton, and James Wakefield on this work.
References
Abernethy, M.A., Brownell, P., 1997. Management control systems in research and development organizations: the role of accounting, behavior and
personnel controls. Accounting, Organizations and Society 22 (3/4), 233–248.
Abernethy, M.A., Chua, W., 1996. Field study of control system ‘Redesign’: the impact of institutional process on strategic choice. Contemporary
Accounting Research 13 (2), 569–606.
Alvesson, M., Karreman, D., 2004. Interfaces of control. technocratic and socio-ideological control in a global management consultancy firm.
Accounting Organizations and Society 29, 423–444.
Anthony, R., 1965. Planning and Control Systems: A Framework for Analysis. Harvard University, Boston.
Arrow, K.J., 1964. Control in large organizations. Management Science 10, 397–408.
T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300 299
Birnberg, J., Snodgrass, C., 1988. Culture and control: a field study. Accounting Organizations and Society 13, 447–464.
Bonner, S.E., Sprinkle, G.B., 2002. The effects of monetary incentives on effort and task performance: theories, evidence, and a framework for
research. Accounting Organizations and Society 27 (4/5), 303–345.
Brown, D.A., 2005. Management control systems as a coupled package: an analytical framework and empirically grounded implications. Ph.D.
Thesis. University of Technology, Sydney.
Bunce, P., Fraser, R., Woodcock, L., 1995. Advanced budgeting: a journey to advanced management systems. Management Accounting Research
6 (3), 253–265.
Chenhall, R., 2003. Management control systems design within its organizational context: findings from contingency-based research and directions
for the future. Accounting Organizations and Society 28, 127–168.
Clegg, S., Kornberger, M., Pitsis, T., 2005. Managing and Organizations: An Introduction to Theory and Practice. SAGE, London.
Daft, R.L., 1983. Organization Theory and Design. West, St. Paul, MN.
Dent, J., 1990. Strategy, organization and control: some possibilities for accounting research. Accounting Organizations and Society 15 (1/2),
3–25.
Dent, J., 1991. Accounting and organizational cultures: a field study of the emergence of a new organizational reality. Accounting Organizations
and Society 16, 705–732.
Emmanuel, C., Otley, D., Merchant, K., 1990. Accounting for Management Control, 2nd ed. Chapman and Hall, Padstow, Cornwall, UK.
Fisher, J.G., 1995. Contingency-based research on management control systems: categorisation by level of complexity. Journal of Accounting
Literature 14, 24–53.
Fisher, J.G., 1998. Contingency theory, management control systems and firm outcomes: past results and future directions. Behavioral Research in
Accounting 10 (Supplement), 47–57.
Flamholtz, E., 1983. Accounting, budgeting and control systems in their organizational context: theoretical and empirical and empirical perspectives.
Accounting, Organizations and Society 8 (2/3), 35–50.
Flamholtz, E., Das, T., Tsui, A., 1985. Toward an integrative framework of organizational control. Accounting Organizations and Society 10 (1),
35–50.
Green, S., Welsh, M., 1988. Cybernetics and dependence: reframing the control concept. Academy of Management Review 13 (2), 287–301.
Greenwood, R.C., 1981. Management by objectives: as developed by Peter Drucker, assisted by Harold Smiddy. Academy of Management Review
6 (2), 225–231.
Hansen, S., Otley, D., Van der Stede, W., 2003. Practice developments in budgeting: an overview and research perspective. Journal of Management
Accounting Research 15, 95–116.
Ittner, C.D., Larcker, D.F., 1998. Innovations in performance measurement: trends and research implications. Journal of Management Accounting
Research 10, 205–239.
Ittner, C., Larcker, D., 2001. Assessing empirical research in managerial accounting: a value-based management perspective. Journal of Accounting
and Economics 32, 349–410.
Kamoche, K., Cunha, M.P., 2001. Minimal structures: from jazz improvisation to product innovation. Organization Studies 22 (5), 733–764.
Kaplan, R.S., Norton, D.P., 1992. The balanced scorecard—measures that drive performance. Harvard Business Review 70 (January–February),
71–79.
Kaplan, R.S., Norton, D.P., 1996a. Using the Balanced Scorecard as a Strategic Management System. Harvard Business Review 74
(January–February), 75–85.
Kaplan, R.S., Norton, D.P., 1996b. Translating Strategy into Action: The Balanced Scorecard. Harvard Business Press, Boston.
Kaplan, R.S., Norton, D.P., 2001a. The Strategy-Focused Organization: How Balanced Scorecard Companies Thrive in the New Business Environ-
ment. Harvard Business School Publishing Corporation, Boston.
Kaplan, R.S., Norton, D.P., 2001b. Transforming the balanced scorecard from performance measurement to strategic management: Part 1. Accounting
Horizons 15 (1), 87–104.
Kondrasuk, J.N., 1981. Studies in MBO effectiveness. Academy of Management Review 6 (3), 419–431.
Koontz, H., O’Donnel, C., 1968. Principles of Management. McGraw-Hill, New York.
Langfield-Smith, K., 1997. Management control systems and strategy: a critical review. Accounting Organizations and Society 22 (2),
207–232.
Macintosh, N., Daft, R., 1987. Management control systems and departmental independencies: an empirical study. Accounting Organizations and
Society 12 (1), 23–28.
Malina, M., Selto, F., 2001. Communicating and controlling strategy: an empirical study of the effectiveness of the balanced scorecard. Journal of
Management Accounting Research 13, 47–90.
Merchant, K.A., Otley, D.T., 2007. A review of the literature on control and accountability. In: Chapman, C.S., Hopwood, A.G., Shields, M.D.
(Eds.), Handbook of Management Accounting Research, vol. 2. Elsevier, Amsterdam, The Netherlands, pp. 785–802.
Merchant, K., Van der Stede, W.A., 2007. Management Control Systems, 2nd ed. Prentice Hall, Pearson Education Limited, Harlow, Essex, England.
Mintzberg, H., 1979. The Structuring of Organizations. Prentice Hall, Englewood Cliffs, NJ.
Orton, J.D., Weick, K.E., 1990. Loosely coupled systems: a reconceptualization. Academy of Management Review 15 (2), 203–233.
Otley, D., 1980. The contingency theory of management accounting: achievement and prognosis. Accounting, Organizations and Society 5 (4),
413–428.
Otley, D., Berry, A., 1980. Control, organization and accounting. Accounting, Organizations and Society 5 (2), 231–244.
Ouchi, W., 1979. A conceptual framework for the design of organizational control mechanisms. Management Science 25 (9), 833–848.
Pratt, J., Beaulieu, P., 1992. Organizational culture in public accounting: size, technology, rank and functional area. Accounting Organizations and
Society 17, 667–689.
300 T. Malmi, D.A. Brown / Management Accounting Research 19 (2008) 287–300
Schein, E., 1997. Organizational Culture and Leadership. Jossey-Bass, San Francisco.
Simons, R., 1987. Accounting control systems and business strategy: an empirical analysis. Accounting Organizations and Society 12, 357–374.
Simons, R., 1994. How new top managers use control systems as levers of strategic renewal. Strategic Management Journal 15, 169–189.
Simons, R., 1995. Levers of Control. Harvard University Press, Boston.
Strank, R., 1983. Management Principles and Practice. A Cybernetic Approach. Gordon and Breach Science Publishers, New York.
Zimmerman, J.L., 1997. Accounting for Decision-Making and Control, 2nd ed. McGraw-Hill, Chicago, USA.
Zimmerman, J.L., 2001. Conjectures regarding empirical managerial accounting research. Journal of Accounting and Economics 32 (1–3), 411–427.