1. Fixation is the most important step in histopathology as inadequate fixation can make proper diagnosis difficult.
2. When receiving specimens, the requisition form and sample container must match the patient's name, sex, age, and registration number. An accession number is then assigned.
3. Samples are properly labelled with the date, accession number, patient information, sample type, and number of samples received. Remarks and final diagnosis are added later.
1. Fixation is the most important step in histopathology as inadequate fixation can make proper diagnosis difficult.
2. When receiving specimens, the requisition form and sample container must match the patient's name, sex, age, and registration number. An accession number is then assigned.
3. Samples are properly labelled with the date, accession number, patient information, sample type, and number of samples received. Remarks and final diagnosis are added later.
1. Fixation is the most important step in histopathology as inadequate fixation can make proper diagnosis difficult.
2. When receiving specimens, the requisition form and sample container must match the patient's name, sex, age, and registration number. An accession number is then assigned.
3. Samples are properly labelled with the date, accession number, patient information, sample type, and number of samples received. Remarks and final diagnosis are added later.
1. What is the most important step and common cause of error in
histopathology? And WHY? - FIXATION. Inadequate or poor fixation will result in a poorly processed tissue and will make it difficult for the pathologist to render a proper diagnosis. 2. How to receive a histopathology specimen? - At the time of receiving the specimens, following points should be checked and these points must match between requisition form and label on the sample container 1. Name of the patient 2. Sex and age of patient 3. Registration no, OPD or indoor number 4. Type of sample like appendix or lymph node After matching the above points carefully, accession number of the Histopathology laboratory should be given on the requisition form and on the sample container like it has been depicted in the form and sample bottle 3. How to Label a histopathology specimen? - 1. Date - 2. Accession number which was given by the pathology department - 3. Patients name, age, sex - 4. Patients registration number/ OPD/ indoor number - 5. Type of sample - 6. Number of samples received from one patient - 7. Remarks / final diagnosis which may be entered later on 4. What is the proper labelling tool for histopathology and why do we need to use it? - use a diamond-tip pencil directly on the glass. This is very permanent, but it's more trouble than frosted slides - something of an art, especially if you need to write quite a lot on each slide. 5. Give the recommended storage time of the following: a. Tissue Specimen - 2 to 4 weeks after the issuance of a final report b. Tissue Blocks - at least 10 years c. Tissue Slides – 5 years 6. Why do we need to preserve the intensity and quality of a tissue slides? - to preserve tissues permanently in as life-like a state as possible. 7. How to prepare for the following: a. 10% Formaldehyde Formaldehyde 40% = 100mL NaCl = 9gm Distilled water = 900mL b. Aqueous Nitric Add Solution 10% we dissolve 15.4 g of 65 % by mass nitric acid in 100 mL of water. 8. In tabulated form give the “General Schedule for Alcohol Dehydration”
10% Zenker Bouin’s Susa, Flemming’s
Formol- or Fluid Carnoy or Fluid Saline Helly’s Formol- Sublimate Running 1-12 1-12 Water Alc. 30% 1-6 ½-3 Alc. 50% 1-6 ½-3 Alc. 70% 13-5 1-6 13-12 ½-3 Alc. 90% 13-5 1-6 13-12 1-6 1-3 Absolute Alc. 13-5 1-6 13-12 1-6 1-3 Absolute Alc. 13-5 1-6 13-12 1-6 1-3 Albolute Alc. 13-5 1-6 13-12 1-6 1-3 - 9. What is the special tissue technique that should be done after fixation and before impregnation? WHY? - Secondary Fixation o To improve the demonstration of particular substances. o To make special staining techniques possible. o To ensure further and complete hardening and preservation of tissues 10. Tissue Processing: Explain the following below. ✓ Fixation - Killing, penetration and hardening of tissues ✓ Dehydration - is simply the removal of water from aqueous-fixed tissue. Since most fixatives are aqueous, this step is necessary to prepare the tissue for embedding in non-aqueous media like paraffin. ✓ Clearing - are used throughout the histology lab in the processes of tissue and slide preparation—to remove alcohol and other dehydrants from tissues prior to embedding (usually in paraffin wax), and from finished slides prior to mounting ✓ Impregnation - is the process of complete removal of clearing reagents by substitution of paraffin or any such similar media such as beeswax. ✓ Embedding - is the process in which the tissues or the specimens are enclosed in a mass of the embedding medium using a mould. Since the tissue blocks are very thin in thickness they need a supporting medium in which the tissue blocks are embedded. ✓ Trimming - to create an even, flat surface in the area of interest in the tissue so that the histologists to not have to face (cut with the microtome) into the paraffin block as deeply when trying to get the first good sections for a slide. ✓ Section-Cutting - is the technique of making the very thin slices of tissue specimens for the microscopic examination to identify the abnormalities or atypical appearance in the tissue (if present) and also for the study of various components of the cells or tissues like Lipids, Enzymes, Antigens ✓ Staining – is used to highlight important features of the tissue as well as to enhance the tissue contrast. ✓ Mounting - To preserve and support a stained section for light microscopy, it is mounted on a clear glass slide, and covered with a thin glass coverslip. ✓ Labelling - Always label samples at the time of collection in the presence of the patient. Use a minimum of two patient identifiers on every sample submitted for testing. (Culling, 1974)
References Culling, C. (1974). Handbook of Histopathological and Histochemical Techniques (Including Museum Techniques), Third Edition.