Technical Specs For Rotavapour
Technical Specs For Rotavapour
Technical Specs For Rotavapour
ROTAVAPOR
Electric/Motorized lift
Provisions for automatic lifting of the flask in case of power failure
Rotation clockwise and counter-clockwise with speed up to 280 rpm or better with microprocessor
control.
The angle of the distillation flask from the horizontal to the bath is set at approximately 15°.
Vertical Glass Assembly with cooling surface area of 1500 cm 2 with top hole on top of condenser
that allows easy cleaning. Should be P+G coated.
Digital bath temperature display of both set and actual temperature simultaneously with
microprocessor control ranging from ambient to 220 deg C with an accuracy of ± 1 deg C.
Bath temperature lock to prevents accidental change of settings
Lift height indication should be digitally indicated on heating bath with 2 Lift Speeds.
Push Button Interface for Single Centralized control of chiller, water bath, vacuum pump
Safety Stop - Operation stop by Power Failure.
Wireless contacts on the heating bath both for power supply and communication for better safety.
Evaporating flask from 50-5000 ml can be used on the same joint adapter without additional
connections.
LCD-display of Heating bath that displays all operating parameters Indicates set and actual
values of heating bath temperature, rotation speed and lift position
Approvals CE / CSA
Additional 2000 ml Evaporating flask other than two number 1000 ml capacity flask.
Provision for Nitrogen supply into the rotary evaporator for specific application during sample
processing.
Gas flow meter (100 to 1000 ml/min) for controlling the Nitrogen or CO2 purging into the
rotavapor system.
VACUUM CONTROLLER
Vacuum controller with control knob and large graphic LCD display screen.
Integrated solvent database of 43 solvents for convenient setting of distillation conditions.
Centralized control of Speed control vacuum pump, Recircualting Chiller, Heating bath.
Timer function for process termination after pre-specified time
Set and actual cooling temperature display, as well as working pressure display on vacuum
controller.
Woulff bottle included
Single button operation to shut down Rotavapor, pump and re-circulating chiller at the end of
distillation.
Approvals CE / CSA
Vacuum Pump
Single stroke Speed control vacuum pump with a vacuum capacity of 1.8 m 3 /h.
Final vacuum of 5mbar
2 stage chemically resistant PTFE diaphragm pump
Inspection window - A large glass window at front side should be there to observe the two pump
heads and membranes for eventual cleaning of the dirt particles.
Approvals CE / CSA
Re-circulating Chiller
Compact and Robust Re-circulating Chiller with a cooling capacity of 550 Watts at 15 deg C and
250 Watts at 0 deg C
Temperature Range: -10 to 25 deg C
Power consumption (max.) 800 W
Temperature display resolution 0.1 °C
Should have Temp Lock
Coolant: CFC Free
NOTE: All accessories and spare parts including Vacuum pump, Chiller and Vacuum Controller
should be from the same Make/Manufacturer.