5UOM StudyGuide PDF
5UOM StudyGuide PDF
Level 5 Operations
Management
BE •
• A
OF
IDE
FICI
GU
L
STUDY
abeuk.com
A
© ABE 2017
This study guide is supplied for study by the original purchaser only and must
not be sold, lent, hired or given to anyone else.
Every attempt has been made to ensure the accuracy of this study guide;
however, no liability can be accepted for any loss incurred in any way
whatsoever by any person relying solely on the information contained within
it. The study guide has been produced solely for the purpose of professional
qualification study and should not be taken as definitive of the legal position.
Specific advice should always be obtained before undertaking any investment.
ABE cannot be held responsible for the content of any website mentioned in
this study guide.
ISBN: 978-1-911550-20-4
Every effort has been made to trace all copyright holders, but if any have
been inadvertently overlooked, the Publishers will be pleased to make the
necessary arrangements at the first opportunity.
The rights of Rajesh Raheja to be identified as the author of this work have
been asserted by him in accordance with the Copyright, Design and Patents
Act 1998.
Acknowledgements
ii © ABE
Contents
Using your study guide iv
Chapter 3 Procurement 76
Glossary
166
© ABE iii
Using your study guide
Welcome to the study guide for Level 5 Operations Management, designed to support those
completing their ABE Level 5 Diploma.
Below is an overview of the elements of learning and related key capabilities (taken from the
published syllabus).
Element 2 – Supply chain and Awareness of supply chains and ability to undertake supply
supply chain management chain mapping
Ability to identify and manage supply chain risks
Appreciation of sustainability and ethical supply chain practices
Ability to identify areas for improvement and how to approach
them
Understanding of business functions, sustainability and ethical
awareness, risk management, continuous improvement
This study guide follows the order of the syllabus, which is the basis for your studies. Each chapter
starts by listing the syllabus learning outcomes covered and the assessment criteria.
iv © ABE
L5 descriptor
Knowledge descriptor (the holder…) Skills descriptor (the holder can…)
• Has practical, theoretical or technological • Determine, adapt and use appropriate
knowledge and understanding of a subject methods and cognitive and practical skills to
or field of work to find ways forward in address broadly defined, complex problems.
broadly defined, complex contexts.
• Use relevant research or development to
• Can analyse, interpret and evaluate
inform actions. Evaluate actions, methods
relevant information, concepts and ideas.
and results.
Is aware of the nature and scope of the
area of study or work.
• Understands different perspectives,
approaches or schools of thought and the
reasoning behind them.
‘Over to you’: activities for you to complete, using the space provided.
ase studies: realistic business scenarios to reinforce and test your understanding of what
C
you have read.
Revision
‘Revision on the go’: use your phone camera to capture these key pieces of learning, then
on the go
save them on your phone to use as revision notes.
‘Need to know’: key pieces of information that are highlighted in the text.
Examples: illustrating points made in the text to show how it works in practice.
Tables, graphs and charts: to bring data to life.
Reading list: identifying resources for further study, including Emerald articles (which will be
available in your online student resources).
Source/quotation information to cast further light on the subject from industry sources.
Highlighted words throughout denoting glossary terms located at the end of the study guide.
Note
Website addresses current as at September 2017.
© ABE v
Chapter 1
Introduction to Operations
Management
Introduction
Operations is both a function and a set of activities in an organisation. In simple words, operations
is about the creation of goods and services in an organisation. This chapter discusses the
meaning and purpose of operations, the fundamental building blocks of operations, the factors
that influence operations, and the importance of operations management in the achievement of an
organisation’s goals.
Quality is an important attribute of effective operations, so this chapter also discusses the
concept of quality, its purpose and significance, and the importance of cultivating a culture of
quality in an organisation.
This study guide uses the term “operations” (as singular) instead of operation. Depending on the
context, goods and services are collectively referred to as “products”. Operations is discussed
only in the context of a business organisation, which will be referred to as “the focal organisation/
organisation”.
Learning outcome
After completing the chapter, you will be able to:
1 Analyse the role and importance of operations management
Assessment criteria
1 Analyse the role and importance of operations management
1.1 Discuss the role of operations management in an organisation
1.2 Discuss the importance of quality and quality management and its integration with operations
management
© ABE
Level 5 Operations Management
FedEx Express is the largest of the four businesses, and accounts for 57% of the corporation’s
total revenue. Each business day it delivers more than 4 million shipments of “documents,
parcels and freight” in over 200 countries. Its 2017 sales revenue was more than US$34 billion.
FedEx Express defines itself as a provider of “rapid, and time-definite” shipment delivery
services, and takes pride in delivering “optimal service quality and reliability”.
FedEx Express aims to improve its performance by being more efficient. In particular, it aims
to reduce the time and resources required by some of its internal processes, and modernise its
logistics by using vehicles and aircraft that are more cost-effective and fuel-efficient.
Source: Adpated from http://investors.fedex.com/company-overview/fedex-express/strategy/default.aspx
Operational refers to short-term, day-to-day plans and action. It is the opposite of strategic or
long-term plans and action.
Operations refers to the resources and processes that create and deliver products in order to meet
customers’ requirements.
© ABE 3
Chapter 1 Introduction to Operations Management
The three basic functions of a business that helps them achieve its objectives are:
• operations;
• marketing;
• finance (see Figure 1).
The business
Operations Finance
Marketing
4 © ABE
Introduction to Operations Management Chapter 1
the design, operation and improvement of the internal and external systems,
resources and technologies that create and deliver the organisation’s primary goods
and service combinations.
Lowson (2002)2
Figure 2 shows a generic transformation process. Its components are explained in Table 2.
Environmental
Input:
forces
Transformed
resources
Materials/
information/ Operations strategy
customers
Improvement
The Output:
Design
1 Slack, N., Chambers, S., and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall
2 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage, Routledge, p. 5
© ABE 5
Chapter 1 Introduction to Operations Management
Transformed These are the basic resources that operations needs to create products.
resources For example, a furniture company’s operations needs wood. Similarly, a
computer software company cannot create software unless they have staff
who have the appropriate programming skills.
Transforming Products are not created from transformed resources by magic. The
resources transformation requires transforming resources: people or machines, or
both. For example, an airline needs flight attendants to deliver excellent
service if it wants to survive and grow. These human resources transform
their ability and training into high-class service that they deliver to
passengers. An automobile manufacturer fulfils its customer requirements
using a blend of people and machines.
NEED TO KNOW
Operations does not mean operational. Operations is one of the core functions in an
organisation. Along with the marketing and finance functions, operations
contributes directly to the achievement of an organisation’s objectives. Revision
on the go
Every type of organisation has operations. The key differences are in the nature and use of the
transformed resources and transforming resources, and the volume and variety of output. Table 3,
adapted from Stevenson (2014)3, shows the important decisions which the operations function is
responsible for.
6 © ABE
Introduction to Operations Management Chapter 1
NEED TO KNOW
Operations has two dimensions:
1 as a set of resources and processes
2 as a basic function
The operations function involves transformation of specific inputs into output
(goods and services) that meet customers’ requirements. Revision
on the go
Over to you
Activity 1: Anatomy of a complex product
Access the corporate website of Rockwell Collins from the link below and answer the
following questions:
https://www.rockwellcollins.com/Our_Company.aspx
What kind of goods and services does Rockwell Collins offer?
What kind of organisation does Rockwell Collins supply its products to?
© ABE 7
Chapter 1 Introduction to Operations Management
Over to you
Activity 2: Argos digital retail operations
Access the news report “Retailer takes the sting out of peak seasons, boosts customer
service levels” (Bond, 2017) in Logistics Management from the link below and answer the
following questions:
http://www.logisticsmgmt.com/article/retailer_takes_the_sting_out_of_peak_seasons_
boosts_customer_service_levels/software
How many customer transactions do they have per year?
How many products do they produce?
How many deliveries do they make?
How many delivery vans do they have in the vehicle fleet?
How many transportation routes do they manage?
8 © ABE
Introduction to Operations Management Chapter 1
While many business operations create output that is a combination of goods and services, there
are many types of business operations that produce only goods, and many others that produce only
services. This is illustrated in Figure 3.
Restaurant meal
Airlines
Intangibility
Product
component
dominates Psychotherapy
Goods and services have different attributes and behaviours, which affect operations
management and operations strategy, as shown in Table 4.
Services are intangible. Operations delivering Goods are tangible. Their physical nature
only services do not result in inventory, and leads to inventory, which involves planning
therefore require no storage, eliminating the and strategy for warehousing facilities,
need for warehousing. transportation and material handling.
4 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage, Routledge
© ABE 9
Chapter 1 Introduction to Operations Management
Staff, not services, require transportation. Goods require transportation. The nature of
Logistics is comparatively simpler. goods determines logistics.
NEED TO KNOW
Goods and services are different types of outputs due to their production, storage,
transportation, distribution and consumption characteristics.
Goods are tangible, and production and consumption can be separated by space and time.
A batch of goods does not show variability.
Services are intangible, and their production and consumption are inseparable in
space and time. Because services are produced by people, they can be of differing
quality. Revision
on the go
Over to you
Activity 3: The transformation process
10 © ABE
Introduction to Operations Management Chapter 1
Over to you
Activity 4: Differences in operations
How is the operations of a fast food outlet different from the operations of a fine-dining
restaurant?
5 Slack, N., Chambers, S., and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall
© ABE 11
Chapter 1 Introduction to Operations Management
Slack, Chambers and Johnston state that the design of the product or service and the design of the
process must be in tandem. This relationship is shown in Figure 4 and an example is explained in
the following case study.
6 Slack, N., Chambers, S., and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall
12 © ABE
Introduction to Operations Management Chapter 1
Over the past few decades, people’s understanding of the role of the operations function has
evolved through three stages, described by Harland7 (see Figure 5).
INTERNAL INTEGRATION
7 Harland, C. (1997), “Supply Chain Management”, in Slack, N. (ed.) (1997), Encyclopedic Dictionary of Operations
Management. Blackwell, p. 210
© ABE 13
Chapter 1 Introduction to Operations Management
Through a well-thought-out operations strategy, the focal organisation’s operations is able to use
physical resources meaningfully, expand the effective “capacity”, and build core competencies
and capabilities. Therefore, operations can be expected to make a direct and positive
contribution to reducing costs and the capital employed, increasing revenue, and enhancing
innovation. These outcomes build the organisation’s competitive advantage. For this to
happen, the operations strategy needs to be aligned with the organisation’s business strategy
and corporate strategy, which will in turn help to achieve the corporate objectives. The
relationship between operations and the organisation’s objectives and strategies is shown in Figure
6 below and Table 5 provides some examples.
CORPORATE OBJECTIVES
CORPORATE STRATEGY
BUSINESS STRATEGY
Operations Finance
objectives, objectives,
strategy and strategy and
processes processes
Marketing
objectives,
strategy and
processes
8 Harrison, A. and van Hoek, R. (2005), Logistics Management and Strategy: Competing through the supply chain,
2nd Ed., FT/Prentice Hall, p. 11
9 Slack, N. and Lewis, M. (2011), Operations Strategy, 3rd Ed., FT/Prentice Hall
14 © ABE
Introduction to Operations Management Chapter 1
Over to you
Activity 5: Core competencies
Lowson (2002)10
10 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage, Routledge
11 Ibid. p. 110–111
© ABE 15
Chapter 1 Introduction to Operations Management
It is important to understand that the organisation can adopt multiple operations strategies
to achieve its business or corporate objectives. However, it does need to make sure that any
incompatibility and trade-offs between various operations strategies are not too great.
Devise Design
operations operations
strategy processes
Design
Plan and
products and
control
services
There are two types of tactical decision that shape the operations strategy of an organisation:
physical and managerial. The physical decisions that influence operations strategy are set
out in Table 6. The managerial decisions (i.e. planning and control) are discussed later in the
chapter.
Location Deciding where to strategically locate a business will depend on the type
of business.
For example, a retailer will want to be close to a crowded residential
area, or in a busy retail area, but a manufacturer will want to be away
from residential areas and have easy access to raw materials and
transport infrastructure (e.g. a coal-mining company needs to be close to
railways).
16 © ABE
Introduction to Operations Management Chapter 1
Facilities This decision focuses on the number of facilities that are required to serve
the market, and the similarities and differences in their operations, based
on the markets served and the products or services they produce.
For example, a hotel group might operate both a budget hotel and a
luxury hotel near the airport.
Flow This refers to the organisation of operations to handle the volume and
variety of products and services for a market segment. Flow strategies can
be placed on a spectrum, with “line flow” and “flexible flow” at the two
ends of the spectrum, and many other types in between. Organisations
can choose one or more flow strategies.
For example, a typical automobile assembly line is organised as line flow. A
company offering financial advice might have a flexible flow, where people
with similar skills or clients sit together.
Process Decisions about process are closely linked to those about flow. There are
broadly five types of processes:
• project
• job
• batch
• line
• continuous
In most operations, the product being created determines the process.
Processes differ in terms of flexibility, volume, the number of people
required, the degree of customer involvement, and the opportunity for
customisation.
For example, construction of a factory is a project, while production of
bread in a small bakery is a batch process.
NEED TO KNOW
Operations can create a competitive advantage for an organisation when it is functionally
integrated and externally supportive. Operations activities should be planned and carried out
with inputs from other organisational functions such as marketing and finance, and should be
aligned with other functional strategies.
© ABE 17
Chapter 1 Introduction to Operations Management
Contribute
to decrease
in capital
required for
production
Reduce the
costs of
production
Increase
revenue by
enhancing
customer Build
Mitigate service operations
operations
related capabilities,
related risks and
skills and
promote
knowledge for
resilience
innovation
Over to you
Activity 6: Business decisions
18 © ABE
Introduction to Operations Management Chapter 1
CASE STUDY
Operations and Profit
A furniture company known for producing high quality
wooden beds plans to improve its operating profit*.
The organisation currently sells 2,000 units each year
at $100 per unit. Its current operating expenses are
$100,000.
Approach 1. Increase sales volume by 25%. However, this requires advertising, which increases
operating expenses by 10%.
Approach 2. Increase price per unit by 20%, and support this price rise with a time-definite
service commitment, such as “order before noon and get same-day evening delivery”.
Operating expenses may increase to cover the cost of using more resources to meet the
delivery commitment.
Approach 3. Improve efficiency to reduce operating expenses by 20%. This approach does not
increase expenses or require financial investment.
Source: Adapted from Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed., FT/
Prentice Hall
© ABE 19
Chapter 1 Introduction to Operations Management
NEED TO KNOW
An organisation’s operations is a network of internal and external processes. Revision
on the go
12 Rushton, A., Croucher, P. and Baker, P (2014), The Handbook of Logistics and Distribution Management, 5th Ed.,
Kogan Page, p. 509
20 © ABE
Introduction to Operations Management Chapter 1
Just like any other function in the organisation, the operations function has explicit and unambiguous
objectives that should contribute to the achievement of the organisation’s corporate objectives.
Examples of operations performance objectives are shown in Table 7, and the benefits of achieving
these objectives are listed in Table 8. The link between process design objectives and operations
objectives is shown in Figure 10.
Operations
Quality Speed Dependability Flexibility Cost
objective
• Appropriate • Less • Dependable • Change easily • Reduce/
Process resources for throughput resources (what, how, or eliminate
design achieving time how much to process waste
objective product process)
specification
Figure 10: The link between operations objectives and process design objectives Revision
on the go
© ABE 21
Chapter 1 Introduction to Operations Management
Achieving performance objectives almost always involves trade-offs. For example, an organisation
may want to reduce customers’ waiting time and keep expenses to a minimum, but to reduce
customers’ waiting time, they may have to employ more people and therefore increase their
expenses.
Merriam-Webster Dictionary13
When operations objectives are achieved in a well-ordered manner, the organisation gains both
tangible and intangible rewards (see the headlines in Figure 11 about IKEA and Centra stores).
However, it is not always a trouble-free journey, and organisations often become the victim of
external forces or internal failures. If an operations function fails to anticipate risks and make
a timely investment in appropriate mitigating actions, it can suffer significant financial and/or
reputational loss (see the headlines in Figure 11 about British Airways and Waitrose) or widespread
disruption in operations (See the headlines in Figure 11 about TNT Express). If the operations
function underestimates the cost of poor quality, the consequence can even be bankruptcy (see
the headlines in Figure 11 about Takata).
NEED TO KNOW
The five operations objectives are quality, speed, dependability, flexibility
and cost. Revision
on the go
22 © ABE
Introduction to Operations Management Chapter 1
Over to you
Activity 7: Division differences
Ahmed and Joseph run a profitable company that has two distinct divisions. One division
is a chain of six fine dining restaurants. The second division is an in-flight catering service
that prepares and supplies in-flight meals for multiple airlines.
Prepare a table that lists the differences between the two divisions in terms of products,
product range and design, customer profile, location, volume, and orientation to quality.
Strategic analysis – both at the functional and corporate levels – is a necessary managerial activity.
The first step in this analysis is to understand the forces at work. These are discussed below. Many
of the terms highlighted in this section are covered in separate topics or subtopics in this chapter
and later chapters.
The customer landscape: This is constantly changing. Customers increasingly expect great variety
and high-quality products at competitive prices, and they expect delivery to be fast and reliable.
Lowson (2002) describes the nature of emerging consumer demand as “piecemeal, disjointed and
unsystematic” that is “becoming increasingly difficult to satisfy”, and states that this is driving the
replacement of mass manufacturing with mass customisation.14 For this reason, operations
needs to be flexible and responsive. Another trend is the shift of the “conscious consumer” from
a niche market segment to the mainstream market segment. These customers demand products
and services that are environmentally and socially preferable and expect the quality and price to be
similar to regular products. To fulfil these requirements, an organisation must adopt sustainable
operations management. This involves “green” products and process development,
“greening” the supply chain, creating an ethical supply chain and adopting reverse
logistics.15
14 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage, Routledge
15 Kleindorfer, P., Singhal K., and Van Wassenhove, L.N. (2005), “Sustainable Operations Management”, Production and
Operations Management, Vol. 14, No. 4, Winter, pp. 482–492
© ABE 23
Chapter 1 Introduction to Operations Management
Competition and rivalry: This is highly visible: a quick look at any marketplace reveals multiple
brands in a large number of product and service categories. Access to modern technology
and abundant finance has lowered entry barriers in almost every industry, and, as a result,
there is a much greater parity between products. Whether you’re comparing mobile phone
retailers or coffee shops, the tangible offers are almost identical. Organisations are forced to
adopt defensive pricing strategies to deal with intense rivalry, and therefore reduce their profit
margin. To achieve better financial results, many organisations strive to attain cost leadership.
The organisation that manages to differentiate – due to innovation or other features – and is
therefore able to charge a premium price is expected to consistently prove the superiority of
its products. Many organisations demonstrate their superiority by embracing total quality
management (TQM).
Rise of information and communications technology (ICT): The twenty-first century has seen
an extraordinary increase in the use of ICT, which is constantly influencing and challenging the
operations function. Driven by the Internet, e-business and m-business are growing. These
technologies have disrupted a number of conventional business models and brought about
a radical change in the operations processes. E-commerce and e-procurement are two of
the most prolific outcomes of the Internet. E-business infrastructure brings long-term benefits
of greater efficiency and effectiveness in buying and selling. According to Slack, Chambers
and Johnston, two key advantages of e-commerce are the improved “reach” (ability to offer
a larger variety of goods to a larger base of customers) and “richness” (ability to offer greater
product information and gain vital information on customers’ purchasing behaviour) that
organisations now have access to. Many organisations are aware of this and are willing to put
substantial investment into creating an e-business and e-commerce infrastructure. However,
any organisation that uses these Internet-led operations must also plan to mitigate the highly
potent risk caused by the threat of cyber-attacks (see the headlines about FedEx and TNT in
Figure 11).
Shareholder expectations: Shareholders are known for their great appetite for profitability,
as it potentially increases dividends. In industries that have intense competition, the challenge
of meeting shareholder expectations is compounded because the competition reduces the
opportunities to increase sales revenue. Instead, these organisations need to aim to source inputs
at the lowest possible unit cost. This shifts their primary focus from functions such as marketing
and finance, to functions such as purchasing and procurement. The pursuit of cost efficiencies
may also change inventory-centric operations, as the organisation decides to shift from traditional
manufacturing to lean manufacturing. Organisations that take this strategic route often adopt
just-in-time (JIT) operations.
16 Slack, N., Chambers, S., and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall, p. 382
24 © ABE
Introduction to Operations Management Chapter 1
There are other stakeholders whose expectations exert pressure on operations. Pressure groups
and customers increasingly believe in the notion of corporate social responsibility. In recent
years, there have been significant legislative initiatives in many countries to hold businesses
accountable on matters such as waste disposal and emissions from vehicles. Green reporting
is mandatory in many western countries, and legislation related to the minimum wage is
commonplace in most countries. Organisations operating in a political-legal environment are
expected to comply with its unique laws, rules and regulations even if that compliance increases its
cost of operations.
Political turbulence: This is an uncontrollable force that poses serious risk to operations. War, riots
and general political instability disrupt flow of material and finished goods vital for production and
distribution.
By understanding these forces, the operations manager can complete risk management and
adopt strategies that reduce the impact of these forces. For example, understanding that no region
is immune to the threat of terrorism allows the operations manager to make an informed decision
between single-sourcing and multi-sourcing strategies.
NEED TO KNOW
There are many environmental and competitive forces that influence operations.
An operations manager needs to analyse the environment to identify these forces
and their likely impact on operations, and adjust operations accordingly. Revision
on the go
To sum it up, the scope of operations has increased. Contemporary operations involves
comprehensive supply chain management that includes making decisions about products and
processes, purchasing and sourcing (upstream, supply side of operations), physical distribution
management (downstream, demand side of operations), materials management, stock (inventory)
management and logistics management.18
17 Lambert, D.M, and Cooper, M.C. (2000), “Issues in Supply Chain Management”, Industrial Marketing Management,
Issue 29, pp. 65–83
18 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage, Routledge
19 Slack, N. (ed.) (1997), Encyclopedic Dictionary of Operations Management. Blackwell, p. 138
© ABE 25
Chapter 1 Introduction to Operations Management
Plan is the intention and control is the driving through of the plan.
Slack (1997)20
The primary aim of operations planning and control is to reconcile the demand from external
customers with the supply from internal operations. This is not a straightforward task, and can only
be achieved if the four constraints shown in Table 9 are managed well.
Capacity limitation The available capacity (e.g. to store materials or finished products)
restricts production.
Over to you
Activity 8: Changing the scope of operations in a private hospital
A high-end hospital specialising in cancer treatment has 700 full-time employees and 300
beds. It is a profit-oriented healthcare facility that functions like a business. In addition to
surgery, intensive care and outpatient and ambulance services, the hospital’s operations also
includes a high-quality cafeteria that runs 18 hours a day and has 50 full time employees.
At a recent board of directors’ meeting, it was suggested that a team of senior managers
should undertake a strategic review of operations with the aim of achieving greater focus
and cost efficiency in its operations.
1 What are the core operations of the hospital?
2 What part of the hospital’s operations could be performed by an external organisation?
26 © ABE
Introduction to Operations Management Chapter 1
Over to you
Activity 9: Planning and control in operations
Mamba’s, a fast food restaurant, offers a time-definite home delivery of 30 minutes on its
specialty chicken burgers that have a standard price of $6 and a profit margin of $1.50
per unit. However, even if delivery takes longer than 30 minutes, they still insist on full
payment.
Their management analyses the efficiency and effectiveness of its order fulfilment, and
find out that 15% of all deliveries take more than 30 minutes.
1 What is your assessment of the time commitment in their operations in financial terms?
2 What will be Mamba’s gain in profit if they reduce the percentage of deliveries that do
not meet time expectations from 15% to 10%?
© ABE 27
Chapter 1 Introduction to Operations Management
The incidents of ruptures continued to increase over the next five years. The company’s
investigation into the cause led to results that were manipulated by its executives. The test
data was also kept secret from the public, the US transport authorities, and the automobile
manufacturers who were Takata’s key customers. As more ruptures were reported and some
causing the death of the driver, automobile companies started recalling cars that were fitted
with Takata airbags.
Between 2008 and 2014, major companies (including Toyota, Honda, Nissan, Mazda and BMW)
recalled more than 10 million cars.
At the end of 2014, the authorities demanded a criminal case to be filed against Takata. The
company’s shares fell to its lowest in five years. The US National Highway Safety Administration
(NHTSA) fined the company heavily for its non-cooperation.
In 2015, Takata made its first public apology after a report came out claiming that there was
deliberate negligence on the part of Takata’s employees in not disclosing the serious lapse of
safety and quality control.
In January 2017, Takata pleaded guilty and paid a fine of US$1 billion to settle the lawsuit. At
least three Takata executives were also criminally charged for concealing vital quality lapses.
In June 2017, Takata filed for bankruptcy in Japan and the US. The company plans to sell its
operations to the Chinese company Key Safety for US$1.6 billion.
Sources: New York Times, Bloomberg, Financial Times
28 © ABE
Introduction to Operations Management Chapter 1
Everyone expects quality, and therefore managers must recognise that by adopting quality
management, the organisation is fulfilling its social responsibilities towards “all stakeholders – owners,
customers, employees, suppliers, and society”.21 However, quality is a relative term because there
is no general agreement on what quality actually is. According to Slack, Chambers and Johnston,22
quality can be viewed from two perspectives: the operations’ view and the customers’ view. While the
operations’ view leans towards specifications that “consistently conform to customer expectations”,
the customers’ view is relatively more complex because it relies more on perception rather than
judgement of “the technical specification of the service or product”. Therefore, effective quality
management reconciles the two views of quality.
A clear definition of quality makes it easier to measure and manage quality. For this reason, several
quality management experts – notably William Deming, Joseph Juran and Philip Crosby – have
defined quality, while a number of institutions dedicated to promoting quality management offer
their own definitions. These include the International Standards Organisation (ISO) and American
Society of Quality (ASQ).
Lysons (1996)23
American Society of Quality (ASQ) offers a similar definition but includes the term “service”.
It defines quality as:
ASQ (2017)24
ASQ (2017)25
Lysons analyses the definitions and concludes that the ISO 8402 definition is comprehensive
because of the focus on product and customers.
Undoubtedly, a product or service with deficient features cannot satisfy customers’ needs for
“economic value as well as safety, reliability, maintainability”. Clearly, the quality issues arising from
product features and customer needs are measurable, controllable and therefore manageable.
21 Laszlo, G.P. (1999), “Implementing a quality management program – three Cs of success: commitment, culture, cost”,
The TQM Magazine, Vol. 11, No. 4, p. 236
22 Slack, N., Chambers, S., and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall, p. 498
23 Lysons, K. (1996), Purchasing, 4th Ed. London: M&E Pitman Publishing, p. 151
24 American Society of Quality (2017), “Quality Glossary”, ASQ Website [Online]. Retrieved from: https://asq.org/quality-
resources/quality-glossary/ [Accessed on: 9 October 2017]
25 Ibid.
© ABE 29
Chapter 1 Introduction to Operations Management
NEED TO KNOW
The delivery of quality is viewed as a social responsibility.
There are two perspectives of quality: (1) the operations’ perspective and (2)
the customers’ perspective. Revision
Revision
on the
on the go
go
According to Slack and Lewis,26 quality means “fit-for-purpose”. In simple words, it means that the
product or service functions in the way that it is expected to. Fit-for-purpose quality is achieved
when the organisation’s operations meets both of the conditions shown in Table 10.
Conformance Specification
When operations are able to “produce When the product and service display a
products to their defined specification combination of hard and soft dimensions
reliably and consistently”. necessary for meeting customer
requirements.
Source: Slack, N. and Lewis, M. (2011), Operations Strategy, 3rd Ed., FT/Prentice Hall, p. 48
The hard and soft dimensions that can be used to measure quality in terms of specification are
shown in Figure 12.
Features Communication
Performance Courtesy
Reliability Helpfulness
Aesthetics Attentiveness
Safety Friendliness
Fit-for-purpose
specification quality
Source: Adapted from Slack, N. and Lewis, M. (2011), Operations Strategy, 3rd Ed.,
FT/Prentice Hall, p. 44
Garvin (1987)27 has a similar idea of quality. He identifies eight independent dimensions of quality.
These are shown in Figure 13 and some examples of each dimension are given in Table 11.
26 Slack, N. and Lewis, M. (2011), Operations Strategy, 3rd Ed., FT/Prentice Hall, p. 48
27 Garvin, D.A. (1987), “Competing on the Eight Dimensions of Quality”, Harvard Business Review, Nov. issue, p. 152
30 © ABE
Introduction to Operations Management Chapter 1
Conformance
Performance Features
Reliability Aesthetics
Perceived
quality
Source: Adapted from Slack, N. and Lewis, M. (2011), Operations Strategy, 3rd Ed.,
FT/Prentice Hall, p. 44
Dimension Examples
Performance Sound quality of headphones.
Prompt room service in a hotel.
Features A suite of services offered by a bank – branch banking, online banking,
personal loans, business loans, mortgage, insurance products, travel
money, etc.
Reliability Computing devices and their failure rate over a period of time (high
frequency of failure indicates poor reliability).
Conformance An airbag produced for an automobile meets the specification in such a
manner that losses from recall, returns, warranties and loss of customers is
minimised.
Durability A low-price non-stick frying pan that lasts for a few years before it rusts
and needs to be replaced, compared to one that rusts after a few months,
resulting in an early replacement cost.
Serviceability The breakdown of a rented car and its prompt replacement by the car
rental company with the highest degree of soft dimensions (see Figure 12).
© ABE 31
Chapter 1 Introduction to Operations Management
Dimension Examples
Aesthetics The “look, smell and taste” of a dish ordered in a restaurant. The notion of
quality aesthetics may vary from customer to customer.
Perceived The perceived reputation of a brand of mobile phone drives the sales of
quality a new model before there is any evidence of its performance, reliability
or durability.
Source: Adapted from Garvin, D.A. (1987), “Competing on the Eight Dimensions of Quality”,
Harvard Business Review, Nov. issue
NEED TO KNOW
There are two attributes of fit-for-purpose quality: (1) conformance, and (2) specification.
Specification quality has hard and soft dimensions.
Revision
on the go
Over to you
Activity 10: Quality characteristics
On a recent shopping trip, you purchased a pair of headphones and a box of chocolates.
1 Explain how these two products differ in terms of quality characteristics.
2 Explain how these quality characteristics are measured.
32 © ABE
Introduction to Operations Management Chapter 1
American Society for Quality (ASQ) has identified four types of COPQ (see Table 12).
Internal failure costs Costs that are incurred after the output, but before the products
reach the customers. These costs include rectifying defects in the
products, and discarding irreparable products.
External failure costs Costs that are incurred after distribution which include “repairs
and servicing, warranty claims, complaints, returns resulting from
recalls and rejects.” The low quality is exposed only after the
products reach the customers.
Prevention costs Costs that are incurred before operations, and aim to prevent
quality issues. Quality planning is one key prevention cost.
Appraisal costs Costs that are incurred to ensure that the “purchased materials,
processes, products, and services” meet the expected
standards. The focus is on quality audits and supplier assessment.
Source: American Society of Quality (2017), “Quality Glossary”, ASQ Website [Online].
Retrieved from: https://asq.org/quality-resources/quality-glossary/
Dale et al.28 offer research-based quantitative evidence of economic gains and losses
associated with quality. Two of these include:
• Economic gain arising from quality:
The organisation that offers superior quality and service can charge a price premium of up to 10%.
• Economic damage due to lack of quality
Quality-related problems lead to a 15% – 30% decline in customer loyalty.
When appropriate investment of time and training is made in quality management, the payback is
an improvement of internal processes, an increase in efficiency (reduced costs) and an increase in
product and service quality (see Figure 14).29
28 Dale, B.G., Bamford, D., and Van der Wiele, T. (2016), Managing Quality: An Essential Guide and Resource Gateway,
6th Ed., John Wiley and Sons,
29 Laszlo, G.P.(1999), “Implementing a quality management program – three Cs of success: commitment, culture, cost”,
The TQM Magazine, Vol. 11, No. 4, p. 236
© ABE 33
Chapter 1 Introduction to Operations Management
Investment
PA
Enhancement of
internal processes
Y - BAC
Improvement in
Training + Time efficiency in operations
Product and service
quality K
NEED TO KNOW
Non-conformance of quality leads to higher costs. This is termed as “cost of poor quality”
(COPQ).
There are four types of COPQ: (1) internal failure cost; (2) external failure cost;
(3) prevention cost and (4) failure cost. Revision
Revision
on the
on the go
go
Over to you
Activity 11: Dimensions of quality
34 © ABE
Introduction to Operations Management Chapter 1
According to Dale33 TQM is a philosophy rather than an approach. He states that TQM “requires
that the principles of quality management should be applied in every branch and at every level in
the organisation”. He describes the key principles of TQM as follows:
• Every individual is responsible and accountable for inspection of his/her work, and continuous
improvement of the processes associated with his/her role.
• Individuals – employees and suppliers – should cultivate and demonstrate total and on-going
commitment to quality improvement.
• Proactive involvement with quality should reduce the flow of defects from one stage to another,
in internal and external processes.
© ABE 35
Chapter 1 Introduction to Operations Management
To appreciate TQM, it is useful to understand the evolution of quality management. This evolution
is shown in Figure 15 and explained in Table 13.
36 © ABE
Introduction to Operations Management Chapter 1
TQM brings two types of benefits: (1) monetary benefits and (2) work culture benefits. Some
examples of each are listed in Table 14.
NEED TO KNOW
Quality management has evolved from basic inspections to total quality management
(TQM). Inspection is an activity carried out after production, and is therefore
reactive. TQM focuses on creating a culture of quality. Revision
Revision
on the
on the go
go
Over to you
Activity 12: Quality management and organisational commitment
© ABE 37
Chapter 1 Introduction to Operations Management
Reading list
• Christopher, M. (2016), Logistics and Supply Chain, 5th Ed., FT Publishing International
• Harrison, A. and van Hoek, R. (2005), Logistics Management and Strategy: Competing
Through the Supply Chain, 2nd Ed., FT/Prentice Hall
• Laszlo, G.P (1999), “Implementing a quality management program – three Cs of success:
commitment, culture, cost”, The TQM Magazine, Vol. 11 Issue: 4, pp.231–237. (This article
will be available in your online student resources.)
• Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage,
Routledge
• Rushton, A., Croucher, P. and Baker, P. (2017), The Handbook of Logistics and Distribution
Management, 6th Ed., Kogan Page
• Slack, N. and Lewis, M. (2011), Operations Strategy, 3rd Ed., FT/Prentice Hall
• Slack, N., Brandon-Jones, A. and Johnston, R. (2013), Operations Management, 7th Ed.,
Pearson
Summary
• Operations is an integral part of all types of organisations, regardless of their size, ownership,
profit orientation, or products.
• Operations is a set of resources and processes that act to “create and deliver products” that
fulfil customers’ requirements; and is one of the functions that are the fundamental building
blocks of businesses.
• The operations function is responsible for creating and delivering goods and/or services.
Meeting customer requirements is the primary aim of operations management, and high
performance operations satisfy customers’ expectations by incurring minimum costs.
• Operations management is a transformation process, and the key elements of an operations
system are transformed resources, transforming resources, and outputs.
• Products and services have different attributes and behaviour that influence operations
management and operations strategy.
• Operations function is defined as a collection of processes spread across an organisation’s
various departments. Over the past few decades, the view on the role of operations function has
changed.
• An organisation’s performance is driven by the network formed by the internal and external
processes. At the core of this network is the organisation.
• When the operations’ objectives are achieved in a well-ordered manner, the organisation gains
tangible and intangible rewards. However, often organisations become the victim of external
forces or internal failures, which can lead to significant financial and/or reputational loss.
• The external environment is constantly changing, and this creates challenges for the operations
function. Therefore, organisations need to design operations that are capable of negotiating
with these forces in a timely manner. Important external influences include changing customer
requirements, competition and rivalry, globalisation, the rise of information and communications
technology, challenges of meeting stakeholders’ expectations, and political turbulence.
• Planning and control are fundamental tasks in managing of all types of business functions.
The primary aim of operations planning and control is to reconcile the demand from external
customers with the supply from internal operations.
38 © ABE
Introduction to Operations Management Chapter 1
• Managers must recognise the importance of quality by adopting quality management. This also
allows the organisation to fulfil its social responsibilities towards all stakeholders.
• Effective quality management reconciles the operations’ view and the customers’ view of quality.
• There are hard and soft dimensions of specification quality. Hard dimensions include features,
performance, reliability, aesthetics and safety. Soft dimensions include communication, courtesy,
helpfulness, attentiveness and friendliness.
• There are two reasons why quality is an important operations objective:
• quality contributes to superior performance in the marketplace, resulting in more revenue for
the organisation and enables the organisation to obtain higher margins
• absence of quality burdens the operations with cost of poor quality.
• TQM views quality as an integral part of an organisation’s way of doing things.
• The purpose of TQM includes:
• cultivation of a “problem-prevention mentality” in the organisation
• to use this mentality to enhance the organisation’s “competitiveness, effectiveness
and flexibility”.
• According to Dale, the key principles of TQM are as follows:
• Every individual is responsible and accountable for inspection of his/her work, and continuous
improvement of the processes associated with his/her role.
• Individuals should cultivate and demonstrate total and on-going commitment to quality
improvement.
• Proactive involvement with quality should reduce the flow of defects from one stage to
another in internal and external processes.
• TQM brings two types of benefits: financial benefits and work culture benefits.
© ABE 39
Chapter 2
Supply Chain and Supply
Chain Management
Introduction
As discussed in Chapter 1, the scope of operations is no longer confined to managing products
and materials: modern operations are about management of an organisation’s whole supply chain
or network.
Competition, globalisation and rapid technological developments are the key triggers in the
transformation of the operations function. The premise of operations management driven by the
supply chain is that operations cannot afford to be externally neutral (i.e. keep suppliers at arm’s
length) because an organisation cannot gain a competitive advantage merely on the strength of its
brands.
This chapter focuses on the configuration of operations as a supply chain/network, the benefits
that an organisation can achieve by adopting the supply chain approach to competing in the
marketplace, and the significance of an effective supply chain strategy. Since supply networks are
often complex, spread over multiple locations and countries, and involve multiple organisations,
they can present many risks. Organisations can identify and manage these risks to mitigate loss, and
this chapter discusses various ways to proactively manage risks and improve supply chains.
Learning outcome
After completing the chapter, you will be able to:
2 Discuss the importance of the supply chain and supply chain management
Assessment criteria
2 Discuss the importance of the supply chain and supply chain management
2.1 Discuss the meaning of an organisation’s supply chain
2.2 Discuss the role of the supply chain management
© ABE
Level 5 Operations Management
35 D.R. Ross (1998), Competing through Supply Chain Management: Creating Market Winning Strategies through Supply
Chain Partnerships, Springer
36 N. Slack (ed.) (1997), Encyclopedic Dictionary of Operations Management, pp. 125–126
© ABE 41
Chapter 2 Supply Chain and Supply Chain Management
The airline business is highly competitive, and comes with high risk because of the nature of the
forces it is subject to, such as security threats and recessions. The profit margin per passenger
is low, and therefore, achieving cost efficiencies is a major operations objective. Passengers
judge airlines very critically based on the value they offer, and food is an important part of this.
Therefore, the quality of food and its timely turnaround are important operations objectives for
an in-flight catering organisation.
Food is a perishable item susceptible to high wastage. Each unit has a cost, both for the airline
and the in-flight catering supplier, and this cost varies with the class – economy or premium – in
which the food is served.
For the suppliers, it is imperative that airlines give them relevant information days in advance
(i.e. how many passengers in each class on each flight), but this demand forecasting is not so
easy. The in-flight catering organisation in fact gets only a six hours lead-time on the exact
number of meals required, and about 30–40 minutes to get the food into the right aircraft
before the flight. Operations can also be affected by other external factors, such as security
concerns and flight delays.
The catering industry is highly competitive, so poor quality food or service can mean the
termination of an exclusive contract. Operations objectives in this fast-response service
environment can only be met if the supply chain is well integrated, and able to mitigate the
risks associated with the industry.
Source: British Airways corporate website, Adapted from Slack, N., Chambers, S. and Johnston, R. (2010), Operations
Management, 6th Ed., FT/Prentice Hall, pp. 387–388
Slack, Chambers and Johnston37 state that an organisation’s competitive advantage is not just
determined by the excellence of some of its operations, but from successful management of the
network that spans operations in the organisation as well as upstream operations (involving
suppliers and suppliers’ suppliers), and downstream operations (involving customers and
customers’ customers). Lambert and Cooper38 argue that in this “era of internetwork competition”,
organisations need to understand this paradigm shift in operations.
This connection to upstream and downstream operations is termed a supply chain (in its simplest
form) and supply network (when the connection includes multiple tiers of organisations). A generic
diagram of a supply chain is illustrated in Figure 1. Tier 1 suppliers and customers are closest to
the focal organisation, and have a direct connection with it. Tier 2 suppliers and customers have no
direct connection with the focal organisation.
37 Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall, p. 141
38 D.M. Lambert and M.C. Cooper (2000), “Issues in Supply Chain Management”, Industrial Marketing Management, Issue
29, pp. 65–83
42 © ABE
Supply Chain and Supply Chain Management Chapter 2
Information Flow
Suppliers Customers
Purchasing Logistics
FOCAL
Marketing and Research and
T2 T1 Product flow T1 T2
sales development
FIRM
The supply chain for an in-flight catering organisation (as described in the previous
case study) is shown in Figure 2. The in-flight catering organisation is the focal organisation, which
survives and grows by bearing the costs and risk of serving its customers (the airlines).
INBOUND LOGISTICS
UPSTREAM
Tier 1 Grocery
suppliers supplier
UPSTREAM
Fruit and Meat and Dairy
Tier 2 vegetables poultry products
suppliers suppliers suppliers suppliers
INBOUND LOGISTICS
Figure 2: A simple illustration of the supply chain for an in-flight catering organisation REVISION
on the go
© ABE 43
Chapter 2 Supply Chain and Supply Chain Management
To understand the “philosophy” of a supply chain, let’s look at its three definitions:
Mentzer (2000)40
Blackstone (2008)41
Collectively, these three definitions state the attributes and scope of supply chains. While the
first definition does not explicitly include “services” in the scope of supply chain, it highlights the
transformative character and the economic motive (“manage returns”) of the supply chain. It also
emphasises the importance of delivering value to customers. The other two definitions include
services, and highlight the flow that occurs in a supply chain.
Mentzer categorises supply chains into three categories, according to their participants, as explained
in Table 1.42
Category Participants
Basic The focal organisation, immediate or Tier 1 suppliers and Tier 1 customers.
Extended The focal organisation, Tier 1 suppliers and customers, and Tier 2
suppliers (suppliers to Tier 1 suppliers) and second-tier customers
(customers of Tier 1 customers).
Ultimate All organisations – whether immediate or remote – that have any direct
or indirect link to the operations of the focal organisation, whether in a
significant or limited way.
44 © ABE
Supply Chain and Supply Chain Management Chapter 2
NEED TO KNOW
The scope of the operations function has grown in the past few decades. Operations
involves production, material management, supplier relationship management,
logistics, physical distribution management, and customer support operations. REVISION
on the go
The generic structure of the “ultimate” supply network is shown in Figure 3, which shows that the size
and complexity of “externally supportive” operations in the focal organisation is determined by the
strategic design of its network structure. Global supply chains are highly complex. This level of complexity
can be defined as “an aggregate measure of the structure, type, and volume of interdependent
activities, transactions, and processes in the supply chain. It also includes the information, constraints, and
uncertainties under which these activities, transactions, and processes take place”43
Regardless of the category or complexity of a supply chain, all supply chains share three common
properties:
• the focal organisation collaborates with organisations engaged in supply (suppliers) and
demand (customers);
• there are upstream and downstream flows of products, services, finances and information;
• multiple processes work together to deliver maximum value.
Supply chain managers who manage a global or “ultimate” supply chain must manage:
• global sourcing through multiple tiers of suppliers, some within the vertical limits of the
organisation and others beyond its boundaries;
• multi-locational facilities serviced by complex logistics comprising multiple modes of transport.
T3 T3
T2 T2
NETWORK BREADTH
T3 T3
T1 T1
T3 T2 T3
T1
FO
T3 T1 T2 T3
T1
T3 T3
T2 FO = Focal organisation T2
T1 = Tier 1
T2 = Tier 2
T3 T3 = Tier 3 T3
Suppliers Customers
NUMBER OF TIERS
43 I. Manuj and F. Sahin (2005), “Supply chain complexity: defining and managing complexity”, Paper presented at 36th
Annual Meeting of the Decision Sciences Institute, San Francisco, November 19–22
© ABE 45
Chapter 2 Supply Chain and Supply Chain Management
According to Gardner and Cooper,45 a supply chain map is a strategic tool for an organisation to
“clarify supply chain dynamics”, identify supply chain risks, and “build innovative, current, effective
supply chains offering sustainable competitive advantages” (see Figure 4).
Understanding
1
SUPPLY CHAIN MAPPING
Identifying
2
supply chain risks
Building
3
a competitive supply chain
NEED TO KNOW
Broadly, there are three types of supply chain: (1) basic, (2) extended, and (3)
ultimate. The ultimate supply chain is multi-tiered, and therefore most complex
and often global. REVISION
on the go
44 Jüttner, U. and Ziegenbein, A. (2009), Supply Chain Risk Management for Small and Medium Sized Businesses, 1st Ed.,
Springer, p. 212
45 Gardner, J.T.and Cooper, M.C (2003), “Strategic Supply Chain Mapping Approaches”, Journal of Business Logistics, Vol.
24 No. 2, p. 61
46 © ABE
Supply Chain and Supply Chain Management Chapter 2
(a)
Material flow Internal supply Customer service
chain
Materials
Suppliers management Customers
Manufacturing
management
Distribution
(b)
Material flow Internal Supply Customer service
Chain
Materials
Suppliers management Customers
Manufacturing
management
Recover
Distribution Refurbish or dispose?
Figure 5: Straight flow (a), and cyclic flow (b) maps REVISION
on the go
Gardner and Cooper also provide the following ways of describing a supply chain map:47
• An unambiguous picture that shows the links between the corporate strategy and supply chain
strategy that provides a greater understanding of the supply chain, and is therefore an important
tool to bring together the goals of different departments.
• A mechanism to alert supply chain managers about the “possible constraints in the system”.
For example, a supermarket might realise it has multiple meat suppliers but only one supplier of
beef, and therefore if that supplier is facing government action for slave labour and may close,
the supermarket has no beef supplier.
• A tool to build, monitor and improve the supply chain. For example, the map can help an
organisation identify the players/entities that should be a part of the supply chain, decide on the
number of tiers that should be managed, and assess the strategic need to redesign the supply
chain based on the analysis of “what is” and “what can be”.
46 Ibid. p. 56
47 Ibid.
© ABE 47
Chapter 2 Supply Chain and Supply Chain Management
Supply chain mapping is used either to help create a supply chain that
conforms to a strategy, or as a check to make sure the current chain is
set up properly to fulfil that strategy.
Gardner and Cooper (2003)48
OVER TO YOU
Activity 1: Supply chain mapping in real life
48 Ibid. p. 46
49 Media Relations, United Parcel Service [online]. Retrieved from: http://docplayer.net/10468268-Supply-chain-mapping-
customer-solutions.html [Accessed on: 7 September 2017]
48 © ABE
Supply Chain and Supply Chain Management Chapter 2
NEED TO KNOW
Supply chain mapping is an instrument of pre-emptive diagnosis. It allows managers to:
1 understand supply chain dynamics;
2 identify risks in their supply chain;
3 build a competitive supply chain. REVISION
on the go
The Swedish organisation explains its business idea as heavily driven by cost leadership and
price leadership strategies: “to offer a wide range of well-designed, functional home products
at prices so low that as many people as possible will be able to afford them.”
In its annual report, IKEA also makes a statement about supply chain welfare orientation: “We
[IKEA] believe that everyone deserves the right to prosper, regardless of their background and
situation. Across our business, from our co-workers to the millions of people who work in our
extended supply chain, we can make a difference to people’s lives around the world.”
Sources: IKEA Sustainability Report (2016). Retrieved from: http://www.ikea.com/ms/en_US/img/ad_content/IKEA_
Group_Sustainability_Report_FY16.pdf [Accessed on: 7 September 2017]
With the breaking of international trade barriers and the proliferation of information and
communication technology, there are an ever-increasing number of organisations that have business
relationships outside their country of origin. Global sourcing and distribution have become the norm
for multinationals, resulting in complex supply chains made up of many culturally diverse suppliers,
many of which have unique processes. In addition to sourcing suppliers from different countries, it is
commonplace for organisations to also distribute or deliver finished goods to customers worldwide.
Waters (2011)50
50 Waters D. (2011), Supply Chain Risk Management: Vulnerability and Resilience in Logistics, 2nd Ed., Kogan Page, p. 35
© ABE 49
Chapter 2 Supply Chain and Supply Chain Management
In these complex networks, raw materials and finished goods physically move through diverse
physical structures and political environments, using multiple modes of transport. With this
complexity of the supply chain come risks – many of which are posed by events that cannot be
foreseen – and which have the potential to disrupt supplies and reduce profits. Some real life
examples of risks from newspaper reports are shown in Figure 6.
Figure 6: Real life examples of supply chain risks and failures REVISION
on the go
Risk is a broad term that can be used in many contexts. However, in the context of operations
management, risk can be defined as:
Any potential event, threat or failure that disrupts the upstream and downstream flow of material,
information and finished goods thereby jeopardising the focal organisation’s ability to fulfil the
requirements of its end customers, and as a consequence, increasing the possibility of lower-than-
anticipated profits.
The magnitude of financial loss due to major supply chain disruption is:
Immediate 7–8% decrease in shareholders’ return. Up to 7% fall in
sales revenue in the year that follows the disruption. Almost 42% decline
in operating income and 35% decline in return on assets.
51 U. Jüttner, H. Peck and M. Christopher (2003), “Supply Chain Risk Management: Outlining an agenda for future
research”, International Journal of Logistics: Research & Applications, Vol. 6, No. 4, 2003, pp. 197–210
52 K.B. Hendricks and V.R. Singhal (2003), “The effect of supply chain glitches on shareholder wealth”, Journal of Operations
Management, Vol. 21, Issue. 5, pp. 501–522
50 © ABE
Supply Chain and Supply Chain Management Chapter 2
Waters (2011)53 broadly identifies two categories of risks: internal and external. Table 2 gives
examples of each kind.
Accidents, human error, faults in computer Industrial action, natural disasters, war
systems, excess stock, poor forecasts, cash and terrorism, epidemics, cyber attacks,
shortages. inflation, shortage of raw materials, supplier
bankruptcy, unethical suppliers.
Some other experts classify supply chain risk according to four pipelines (or “sub-chains”) of the
network.54 These are explained in Table 3.
Relational sub-chain These are intangible links that are built on “mutual
trust and commitment”, discourage “opportunistic
behaviour”, and drive managers “to act in the interests
of all supply chain members”55
53 Waters, D. (2011), Supply Chain Risk Management: Vulnerability and Resilience in Logistics, 2nd Ed., Kogan Page
54 Faisal, M. N. (2009), “Prioritisation of Risks in Supply Chains”, in: T. Wu and J. Blackhurst (eds) Managing Supply Chain
Risk and Vulnerability, London: Springer, p. 47
55 Spekman, R.E., and Davis, E.W. (2004), “Risky business: expanding the discussion on risk and the extended enterprise”,
International Journal of Physical Distribution & Logistics Management, Vol. 34 Issue: 5, p. 423
56 Chopra, S., and Sodhi, M.S. (2004), “Managing Risk to Avoid Supply-Chain Breakdown”, MIT Sloan Management
Review, October 2004, Fall Issue
© ABE 51
Chapter 2 Supply Chain and Supply Chain Management
Source
Type of risk
Suppliers Customers Focal Organisation
Disruptions A key supplier forced Sudden surge or Natural disaster shuts
to close factory due decline in demand down the major
to unethical conduct manufacturing unit
Delays Flash floods delay Key customer Production orders
movement of trucks postpones purchase delayed for a week
on the highway order
Systems Power cuts cause Customer’s computer Human error shuts
breakdown of systems break down down computer
supplier’s computers because of major systems
cyber attack
Information Ad-hoc increases in Sudden change in Sudden change in
Processing order size in quick order pattern disturbs order quantity disturbs
succession production plan supplier’s production
plan
Intellectual Supplier exploits
Property (IP) weak local IP law,
breaking contract
to create own
product with focal
organisation’s IP
Procurement Sudden and Conflict with key
steep increase in supplier as payment
transportation costs is delayed due to
unexpected shortage
of cash
Receivables Delay in receiving a
large payment from
a customer who
purchased on credit
Table 4: Classification of supply chain risk according to supply chain entities REVISION
on the go
OVER TO YOU
Activity 2: Customer-related risks
List three ways a focal organisation’s operations might be affected by an uncertain delay
in receiving a large payment from a customer who purchased on credit.
52 © ABE
Supply Chain and Supply Chain Management Chapter 2
OVER TO YOU
Activity 3: Supply chain risks associated with air freight
James Hall (2010) reported: “Retailers have increasingly turned to air freight to deliver
goods in recent months to counter the soaring costs of sea freight.”
1 Read his article “Volcanic ash cloud leaves shops facing shortages of fruit, vegetables
and medicine” using the link below.
http://www.telegraph.co.uk/finance/newsbysector/retailandconsumer/7599042/
Volcanic-ash-cloud-leaves-shops-facing-shortages-of-fruit-vegetables-and-medicine.html
2 List three risks associated with a supply chain that primarily relies on air
transportation.
3 Write three risks associated with sea freight.
4 Which of the two modes of transportation do you think is the less risky?
© ABE 53
Chapter 2 Supply Chain and Supply Chain Management
OVER TO YOU
Activity 4: Supplier related risks
Refer to the case study: Ikea’s Operations (A). Note that there are millions of workers
employed with IKEA’s suppliers in its multi-tiered supply network.
Thinking about the fact that IKEA takes pride in being a socially responsible organisation,
write down three supplier-related ethical risks that could affect IKEA’s reputation.
CORE
OF
CHAIN
54 © ABE
Supply Chain and Supply Chain Management Chapter 2
There are several definitions of supply chain management in operations management literature.
According to Lambert and Cooper,57 “supply chain management (SCM) is a new way of managing
the business and its relationships”. Christopher defines it as:
Christopher (2004)58
Chopra and Meindl support this definition of supply chain management. They use the term “supply
chain surplus” to describe the notion of value.59 They suggest that while some part of this value is
enjoyed by the customer, the rest is “supply chain profitability”. They express supply chain surplus
in a simple equation:
According to Harland,60 the notion of supply chain management has evolved from traditional operations
in which the management of the supply chain was viewed as management of the “internal supply chain”
comprising functions such as purchasing, materials control, production, sales and distribution.
The Council of Supply Chain Management Professionals (CSCMP) offers a very comprehensive
definition:
Houlihan suggests that the network perspective makes supply chain management more strategic
than classical operations management because it takes a systems view of operations in which
“supply becomes a shared objective of every function”, and “integration” of fragmented functions
replaces “interfacing” between functions.62 This shift in approach has a direct and positive “impact
on overall costs and market share.”
57 Lambert, D.M. and Cooper, M.C. (2000), “Issues in Supply Chain Management”, Industrial Marketing Management,
Issue 29, p. 66
58 Christopher, M. (2004), Logistics and Supply Chain Management: Creating Value – Adding Networks, 3rd Ed., Financial
Times / Prentice Hall, p. 5
59 Chopra, S., and Meindl, P. (2015), Supply Chain Management: Strategy, Planning and Operation, 6th Ed., Global Edition,
Pearson, p. 15
60 Slack, N. (ed.) (1997), Encyclopedic Dictionary of Operations Management, p. 210
61 Crandall, R.E., Crandall, W.R. and Chen, C.C. (2015), Principles of Supply Chain Management, 2nd Ed., CRC Press, p. 6
62 Houlihan, J.B. (1988), “International Supply Chain Networks: A New Approach”, Management Decision, Vol. 26, No. 3, p. 13
© ABE 55
Chapter 2 Supply Chain and Supply Chain Management
OVER TO YOU
Activity 5: Managing supply networks
1 Read the article “Shining Examples” (The Economist, June 2006) at: http://www.
economist.com/node/7032179
2 Prepare and deliver a two-minute presentation to the class about Zara’s approach to
supply chain management.
56 © ABE
Supply Chain and Supply Chain Management Chapter 2
Lambert, Cooper and Pagh65 suggest supply chain business processes must be managed to create
an “outcome driven supply chain.” Their model is shown in Figure 8.
Information flow
Manufacturer
Suppliers Customers
Purchasing Logistics
ISCM
Marketing and Research and
T2 T1 Product flow T1 T2
sales development
PROCESSES
Demand management
Order fulfilment
Manufacturing flow management
Procurement
Product development and commercialisation
NEED TO KNOW
Supply chain networks offer the following two advantages.
1 Economies of scale and economies of scope in activities.
2 Organisations can overcome the constraints imposed by limited in-house
resources and capabilities. REVISION
on the go
Supply chain risk management (SCRM) is an integral part of supply chain management. SCRM
65 D.M. Lambert, M.C. Cooper, J.D. Pagh (1998), “Supply Chain Management: Implementation Issues and Research
Opportunities”, The International Journal of Logistics Management, Vol. 9 Issue: 2, p. 2
66 Slack, Chambers and Johnston (2010), Operations Management, p. 574
© ABE 57
Chapter 2 Supply Chain and Supply Chain Management
requires a comprehensive strategy that is created by taking a top-down identification and mapping
approach, and a bottom-up “emergent” approach.82
According to Craighead et al.,67 there are three supply chain attributes that contribute to enhance
the severity of disruption in operations: density, complexity, and node criticality (see Figure 9).
However, if the supply chain is designed to facilitate the quick flow of information in the aftermath
of the event, the loss from disruption can be reduced. This is one aspect of risk management that
decreases the probability of disruption and mitigates the threat to profitability.
Supply Chain
Complexity
Density
Node
Criticality
Severity of Disruptions
Source: Adapted from Craighead, Jennifer, Johnny and Handfield (2007)
Kleindorfer and Saad68 offer the SAM framework of supply chain risk management. SAM is an
acronym for “specifying sources of risk and vulnerabilities, assessment and mitigation”. Specific
elements of the “S” (specifying sources of risk and vulnerabilities) are listed in Table 5 and the ten
principles of “assessment and mitigation” are explained in Table 6.
67 C.W. Craighead, B.M. Jennifer, R. Johnny and R.B. Handfield (2007), “The severity of supply chain disruptions: Design
characteristics and mitigation capabilities”, Decision Sciences 38(1) pp. 131–156
68 Kleindorfer, P.R. and Saad, G.H. (2005), “Managing Disruption Risks in Supply Chains”, Production and Operations
Management, 14(1), pp. 55–57
58 © ABE
Supply Chain and Supply Chain Management Chapter 2
Principles Explanation
Provide “incentive alignment and Based on the premise that “one weak
collaboration” to mitigate risks among all partner” can be disastrous for the entire
supply partners “through early warning and supply network.
crisis management systems”
Stage “risks and failures” and test the entire
network through rehearsal.
Risk avoidance should precede risk reduction Investment is essential to determine how
“key vulnerabilities” can lead to “worst case
scenarios”.
These scenarios are mapped with mitigation
strategies in order of preference.
Take traditional steps to build a robust Create physical and virtual back-up systems.
network and improve processes
Cultivate three Cs (co-operation, co- Very useful in identifying weak links. Can
ordination, and collaboration), internally be adopted across industries for mitigating
across all functions, and externally across the universal risks such as “terrorism and
entire supply network security”.
Adopt Total Quality Management and Six This “enhances supply chain security” and
Sigma tools. Implementation possible with “reduces operating costs”.
“information coding systems and the use
of RFID (radio frequency identification)
technology”
Table 6: The ten principles of the SAM framework for supply chain risk management REVISION
on the go
© ABE 59
Chapter 2 Supply Chain and Supply Chain Management
One weak partner in the supply chain can prove disastrous for
all participants, especially when purposeful agents analyse rationally
where to target their disruptive attacks.
Chopra and Sodhi70 suggest that SCRM strategy requires a two-pronged approach and corresponding
techniques (see Table 7).
Stress testing
The third step anticipates and assesses the “level of pre-preparedness” by using basic, realistic
“what-if” questions that explore the impact on operations. Examples could include:
• What if Supplier A’s plant breaks down for a month?
• What if it takes six months to find a replacement for Supplier A?
• What if Supplier B increases their prices by 25% when the contract is renewed?
• What if there is an earthquake in Location X?
• What if Supplier C steals the product patent and launches its own brand?
• What if one of the key IT servers at the data centre shuts down unexpectedly?
One of the key advantages of stress testing is to cultivate a sense of shared ownership in the
focal organisation.
Tailoring
As each organisation is different in its operations, it is imperative that SCRM strategy is specific
to the focal organisation’s operations. However, the general focus of tailoring involves “building
various forms of reserves, including inventory, capacity, redundant suppliers and responsiveness”.
The challenge for managers is to achieve the trade-off between risk of occurrence and cost of risk
69 Ibid. p. 56
70 Chopra, S. and Sodhi, M.S. (2004), “Managing Risk to Avoid Supply-Chain Breakdown”, MIT Sloan Management
Review, October 2004, Fall Issue, p. 12
60 © ABE
Supply Chain and Supply Chain Management Chapter 2
L Y C H
P A
P
I
U
N
S
R I S K
Risk of Cost of
occurrence mitigation
TRADE – OFF
T
N
M
E
M A
N A
G E
Taking a specific instance of risk mitigation in planning capacity, Chopra and Sodhi suggest a
tailoring rule of thumb. This is shown in Table 8.
71 Ibid.
72 Slack, Chambers and Johnston (2010), Operations Management, p. 546
© ABE 61
Chapter 2 Supply Chain and Supply Chain Management
Continuous improvement
The premise that underpins continuous improvement is that a series of successive, incremental
improvements can have a much more positive effect on supply chain performance than a single
large one. Because the changes in continuous improvement are small, each takes effect without
causing too much disruption to operations. However, it is important that the focal organisation
maintains the momentum of improvement.73 Some examples of continuous improvement are
shown in Figure 11.
Continuous improvement
Some examples
Reorganising ingredients Modifying the way Simplifying the Changing the layout to
for quicker access customers are made patient discharge speed up access to
while producing a cup to queue to reduce form to decrease finished goods
of coffee waiting time inconvenience
Continuous improvement has its origin in Japan. It is popularly known as “Kaizen” in the operations
management literature. Kaizen’s scope is comprehensive and includes “continual improvement in
all hard and soft aspects of operations”, such as “equipment, procedures, skills, quality, throughput
time, supplier relationships etc.”74
62 © ABE
Supply Chain and Supply Chain Management Chapter 2
Collaboration
Collaboration is the coming together of organisational entities with the purpose of achieving a
common economic goal. To do this, they invest resources, and share information, risks and rewards.
Joint decision-making and problem-solving are other inherent characteristics of collaboration.75
Competitive advantage
Chapter 1 highlighted the emerging view that the days of brand-driven competitive advantage are
over. Industries are now characterised by inter-network rivalries77 in which supply chain management
underpins competitive advantage.
According to Harland,78 the organisation that adopts the supply network strategy is able to achieve
financial gains from a much wider geography than what is possible with its “in-house capabilities”.
This becomes possible as the organisation gets the opportunity to manage the larger value system
rather than just the limited internal value chain. This growth orientation is based more on the bolder
“strategic intent” rather than a conservative “strategic fit”.
The advantages gained from supply networks are explained in Table 10.
Advantage Example
Economies of scope A bank can spread its fixed costs over a range of services (e.g.
retail banking, institutional banking, mortgage, insurance and
share trading services), which also gives it a wider variety of
customers.
Source: C. Harland in N. Slack (ed.) (1997), Encyclopedic Dictionary of Operations Management, p. 213
75 C.A. Soosay, P.W. Hyland and M. Ferrer (2008), “Supply Chain Collaboration: Capabilities for Continuous Innovation”,
Supply Chain Management – An International Journal, 13/2 , p. 161
76 Ibid. p. 160
77 Lambert and Cooper (2000), “Issues in Supply Chain Management”
78 C. Harland in N. Slack (ed.) (1997), Encyclopedic Dictionary of Operations Management, p.213
© ABE 63
Chapter 2 Supply Chain and Supply Chain Management
NEED TO KNOW
Continuous improvement brings improvement in operations performance via small,
incremental improvement actions. It achieves positive outcomes if momentum
of actions is maintained on a continual basis. REVISION
on the go
OVER TO YOU
Activity 6: Continuous improvement
For many years, IKEA and its suppliers had been big users of polystyrene. However, with the
corporation’s growing focus on sustainability, it decided to replace polystyrene packaging in
its flat-packs with a more environment-friendly material. To achieve this aim, IKEA decided to
develop a suitable alternative, even though, in the initial stages, it met with resistance from
its suppliers who worried about the high cost of the more sustainable packaging material.
However, taking a partnership approach with its suppliers and co-workers, IKEA has managed
to phase out polystyrene packaging by replacing it with a highly recyclable fibre-based material.
In quantitative terms, they diverted from landfill 8000 tonnes of polystyrene, which equates to
7400 truck loads or more than half the volume of the Empire State building, in New York.
64 © ABE
Supply Chain and Supply Chain Management Chapter 2
IKEA has not stopped looking for even better alternatives. Recently, they announced that they
are exploring “fungi packaging” made from mushrooms. The sustainability manager at IKEA
feels that this innovative and biodegradable packaging material will help them achieve their
sustainability goals.
Source: IKEA Annual Summary 2016 and Gosden, E. (2016), “IKEA plans mushroom-based packaging as eco-friendly
replacement for polystyrene”, The Telegraph [Online]. Retrieved from: http://www.telegraph.co.uk/news/earth/
businessandecology/recycling/12172439/Ikea-plans-mushroom-based-packaging-as-eco-friendly-replacement-for-
polystyrene.html
Sustainability and ethical supply chain management are two integral elements of corporate social
responsibility (CSR). CSR is defined as:
According to Slack, Chambers and Johnston,80 corporate social responsibility has five dimensions,
shown in Table 11. Social responsibility, sustainable environment-friendly processes and ethical
conduct are becoming critical factors in determining the reputation and performance of
organisations. According to Bals and Tate,81 there has never been greater pressure on organisations
to adopt practices of sustainable supply chain management.
Social dimension The empathy that the organisation displays towards society
and the positive contribution that it makes to it.
79 Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice, p. 633
80 Ibid.
81 Bals, L., and Tate, W. (2016), Implementing Triple Bottom Line Sustainability into Global Supply Chains, 1st Ed., Routledge
82 Seuring, S. and Muller, M. (2008), “From a literature to a conceptual framework for sustainable supply chain
management”, Journal of Cleaner Production, Vol. 16, p. 1700
© ABE 65
Chapter 2 Supply Chain and Supply Chain Management
Stakeholder dimension What the focal organisation does to reconcile the needs and
expectations of its various stakeholders.
Voluntariness dimension The ethical initiatives that the organisation takes of its own
volition, which go beyond legal compliance.
Customers’ sensitivity towards sustainable products and services is growing, and organisations are
increasingly aware that customers might reject their products if they do not meet sustainability
expectations. Governments are also getting more stringent about sustainability norms.83 Along
with other pressures and incentives resulting from concern for the environment, these are forcing
organisations to articulate an explicit policy on SSCM (see Figure 12) and put into action a positive
SSCM strategy. Operations management is expected to identify the impact of its decisions on the
environment and take appropriate and pre-emptive steps to build a sustainable supply chain. Some
examples are highlighted in Table 12.
Customers
Government Stakeholders
Focal
organisation
Assess Manage
multi-tier suppliers for
suppliers sustainable
for risk products
83 Ibid.
84 Ibid. p. 1706
66 © ABE
Supply Chain and Supply Chain Management Chapter 2
Supply chain planning Carrying out physical distribution with minimum consumption
and control of energy.
Source: Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice
Hall: p. 639
NEED TO KNOW
The five dimensions of corporate social responsibility are:
1 the environment dimension
2 the social dimension
3 the economic dimension
4 the stakeholder dimension
5 the voluntariness dimension REVISION
on the go
OVER TO YOU
Activity 7: Key aspects of operations
You have been given the contract to design a small 25-bed hospital.
or each of the decision areas in Table 12, write down one or two key aspects of
F
operations that you will consider.
© ABE 67
Chapter 2 Supply Chain and Supply Chain Management
Customers Suppliers
Staff Community
Figure 13: Groups affecting or affected by ethics in supply chain management REVISION
on the go
Examples of how a lack of ethics can affect supply chain management are given in Table 13.
Table 13: Examples of the effect of lack of ethics on supply chain management REVISION
on the go
OVER TO YOU
Activity 8: Ethics-related effects
1 For each group listed in Table 13, write down two more examples of how a lack of
ethics could affect them.
2 Research the internet and, for each group, write down one real example of how a lack
of ethics has affected that group.
68 © ABE
Supply Chain and Supply Chain Management Chapter 2
OVER TO YOU
Activity 9: Business strategy and CSR
© ABE 69
Chapter 2 Supply Chain and Supply Chain Management
Performance measures
Performance denotes the actions taken by operations managers to achieve these objectives in
quantifiable terms. According to Slack, Chambers and Johnston,86 a well-developed performance
measurement system achieves two results:
• it establishes control
• it enables improvement
The operations performance measurement system can span two levels as shown in Table 14.
Levels Measures
NEED TO KNOW
Performance measurement is important because it establishes control and enables
improvement.
There are two broad dimensions of performance measurement: effectiveness
and efficiency. REVISION
on the go
70 © ABE
Supply Chain and Supply Chain Management Chapter 2
Specific areas included in SLAs are strictly measurable. Examples include a maximum response
time, the scope of service, and areas of responsibility.87 This allows the buyer to include
a payment clause linked to the fulfilment of the level of service to which the supplier has
committed. The SLA can also include a bonus or penalty, based on whether the performance
metrics are met or not (van Weele, 2010).
Service level agreements can either be between organisations, or between different departments
or operations of the same organisation. The latter type of SLAs formalise the level of services
to be provided by one operation within an organisation to another operation. SLAs objectively
highlight any service shortfall and dissatisfaction, and can therefore be used for continual
improvements in performance.
SLA principles recognise that buyers and vendors can, and often do,
have conflicting interests in managing costs and risks.
Deloitte (2014)88
For example, in the past few years, several activities related to information technology have been
commonly outsourced to specialist suppliers. One example of these activities is the resolution of
queries raised by staff to the dedicated telephone-based IT helpdesk. The SLA between the buyer
and the supplier can specify the limit of response time at two hours, which means that the support
staff is expected to resolve any query either immediately or within two hours by making a return
call to the complainant. Once the query is resolved, a simple electronic feedback system can easily
measure the complainant’s satisfaction level.
Slack, Chambers and Johnston state that a key drawback of SLAs is the emphasis on rigid
formalisation of expectations, which can become a deterrent to building a trusting partnership.89
OVER TO YOU
Activity 10: Performance metrics
You are the purchase manager of a medium-sized organisation, and your company has
purchased its first photocopier machine.
List four specific performance metrics that you would include in the service level
agreement with the vendor.
87 J. Mangan, J., and Lalwani, C. (2016), Global Logistics and Supply Chain Management, 3rd Rev. Ed., John Wiley and
Sons, p. 231
88 Deloitte (2014), “Guiding principles to service level agreements” [online]. Retrieved from: https://www2.deloitte.com/
content/dam/Deloitte/us/Documents/process-and-operations/us-service-level-agreements-BPO-121214.PDF
89 Slack, Chambers and Johnston (2010), Operations Management
© ABE 71
Chapter 2 Supply Chain and Supply Chain Management
The generic operations performance measures are diagnostic. They can be numerous and measured
frequently, and they offer deep insight into operations performance. Some examples of these
measures are given in Table 15.
They also highlight three competitive factors in meeting customers’ preferences (see Table 16).
72 © ABE
Supply Chain and Supply Chain Management Chapter 2
Factor Significance
Less important Of no importance in gaining extra business and therefore can be ignored
NEED TO KNOW
Improvements in operations performance that aim to meet customers’ needs involve
identifying and grouping factors into “order winners”, “order qualifiers” and
“less important”. REVISION
on the go
OVER TO YOU
Activity 11: Generic operations performance measures
Working in teams, write down five examples of performance measures for quality,
dependability, speed, flexibility and cost.
© ABE 73
Chapter 2 Supply Chain and Supply Chain Management
READING LIST
• Chopra, S. and Meindl, P. (2015), Supply Chain Management: Strategy, Planning and
Operation, 6th Ed., Global Edition, Pearson
• Christopher, M. (2016), Logistics and Supply Chain, 5th Ed., FT Publishing International
• Gardner, J.T. and Cooper, M.C. (2003), “Strategic Supply Chain Mapping Approaches”,
Journal of Business Logistics, Vol. 24, No. 2
• Mangan, J. and Lalwani, C. (2016), Global Logistics and Supply Chain Management, 3rd Rev.
Ed., John Wiley and Sons
• Mentzer, J.T. (2000), Supply Chain Management, 1st Ed., Sage Publications
• Rushton, A., Croucher, P. and Baker, P. (2017), The Handbook of Logistics and Distribution
Management, 6th Ed., Kogan Page
• Seuring, S. and Muller, M. (2008), “From a literature to a conceptual framework for
sustainable supply chain management”, Journal of Cleaner Production, Vol. 16 (2008), pp.
1699–1710
Summary
• The scope of the operations function is limited and senior managers tolerate the “internal and
external neutrality” of the operations function.
• The boundary of the operations function is not restricted to production and materials
management, but also encompasses supplier relationship management, logistics, physical
distribution management, and customer support operations.
• The focal organisation’s competitive advantage is not just determined by the excellence of
some of its operations, but also by managing the network that spans operations within the
organisation and all their links to upstream operations.
• A supply chain is a group of partners who collectively convert a basic commodity into a finished
product that is valued by end-customers, and who manage returns at each stage. It is a set of
three or more companies directly linked by one or more of the upstream or downstream flows
of products, services, finances and information from a source through to a customer. It can be a
global network used to deliver products and services from raw materials to end customers in an
engineered flow of information, physical distribution and cash.
• Mentzer classifies the supply chain into three categories: basic, extended and ultimate.
• All supply chains share three common properties:
• the focal organisation collaborates with other organisations (suppliers and customers);
• there are upstream and downstream flows of products, services, finances and information;
• the supply chain has multiple processes that work together to deliver maximum value.
• The role of the supply chain manager includes managing:
• global sourcing through multiple tiers of suppliers, some within the vertical limits of the
organisation and others beyond its boundaries;
• multi-locational facilities serviced by elaborate logistics comprising multiple modes of
transport.
• Supply chain maps can be broadly classified into two types: straight flow and cyclic flow.
74 © ABE
Supply Chain and Supply Chain Management Chapter 2
• A supply chain map is a strategic instrument enabling the organisation to clarify supply chain
dynamics, identify supply chain risks, and build innovative, current, effective supply chains that
offer sustainable competitive advantages.
• Supply chain risk refers to the possibility and effect of a mismatch between supply and demand.
Risks can be internal or external and can come from three sources: suppliers, customers and the
focal organisation.
• The notion of supply chain management has evolved from traditional operations when the
management of the supply chain was viewed as management only of the “internal supply chain”
comprising functions such as purchasing, materials control, production, sales and distribution.
• Two key advantages of managing networks are:
• networks offer economies of scale and economies of scope in activities.
• networks enable the organisation to overcome the constraints imposed by limited in-house
resources and capabilities by offering the opportunity to achieve productivity and economic
gains from other businesses’ resources.
• Supply chain risk management (SCRM) is an integral part of supply chain management. Three
supply chain attributes that contribute to enhance the severity of disruption in operations are:
density, complexity and node criticality.
• SCRM strategy requires a two-pronged approach: shared understanding, and fine-tuned risk
mitigation.
• Stress testing is a “what-if” technique that involves three steps: identification, surveying
and probing.
• SCRM strategy should be specific to the focal company’s operations as each organisation is
different in its operations.
• The challenge for managers is to achieve the trade-off between risk of occurrence and cost of
risk mitigation.
• Improvement in the supply chain cannot be ad-hoc and periodic but must be an integral part of
the operations manager’s role.
• The premise that underpins continuous improvement is that a series of successive, incremental
improvements can have a much more positive effect on supply chain performance than a large one.
• Continuous improvement is different from “breakthrough” improvement.
• Collaboration is the coming together of organisations with the purpose of achieving a common
economic goal.
• The organisation that adopts a supply network strategy can reap financial gains from a much
wider area than is possible with only its in-house capabilities.
• The advantages an organisation gains from supply networks are: economies of scale, economies
of scope, and competitive advantage.
• Sustainability and ethical supply chain management are elements of corporate social
responsibility (CSR).
• Social responsibility, sustainable environment-friendly processes and ethical conduct are becoming
critical factors in determining an organisation’s reputation and performance.
• There are five dimensions of CSR: environmental, social, economic, stakeholder and voluntariness.
• Performance refers to the actions taken by operations managers to achieve the objectives in
quantifiable terms.
© ABE 75
Chapter 3
Procurement
Introduction
A few decades ago, just a handful of organisations existed in most industries. The industry leaders
either belonged to Western economies or Japan. Rivalry within each industry was not intense.
The suppliers were local and buyer-supplier relationships were stable. Purchasing in this era was
treated as a support function within an organisation. However, since the widespread deregulation
of industries in the 1980s, along with the breaking of trade barriers and the arrival of the internet,
most industries have experienced significant competition.
The economic ecosystem in almost every industry is evolving rapidly, and the opportunities to earn
high margins through product differentiation have been declining. In this context, the purchasing
function is gaining importance. The rationale behind this development is that purchases form a large
proportion of the product cost, and therefore, even a small percentage of savings obtained from
purchases creates a healthy opportunity to make value for the customers and achieve greater profit.
Gains from strategic purchasing can be achieved more quickly than making changes to products.
In this chapter, you will learn about the evolution of purchasing into procurement, the ideas that
underpin strategic purchasing, and the ways in which an organisation can successfully configure
itself in the changing supply and demand landscape.
Learning outcome
After completing the chapter, you will be able to:
3 Analyse the role of procurement and procurement approaches
Assessment criteria
3 Analyse the role of procurement and procurement approaches
© ABE
Level 5 Operations Management
Purchasing is the activity that links the focal organisation to its external network. It is defined as:
Lysons (1996)91
Britain joined the EU in 1973 as one of its first few members. Over the years, because of some
political and ideological reasons, there was a growing pressure from a section of the public,
and also lawmakers (politicians), to leave the EU. In 2015, the British government of the day
announced that there would be a national referendum to decide whether Britain should remain
a member of the EU or exit the common market. The referendum was held in June 2016
and the majority of voters elected to leave the EU. However, the process of exiting is not so
straightforward and there need to be protracted negotiations between the EU and British policy
makers.
91 Lysons, K. (1996), Purchasing, 4th Ed. London: M&E Pitman Publishing, p. 1
© ABE 77
Chapter 3 Procurement
In the aftermath of the referendum, the value of Britain’s pound sterling has fallen substantially,
and the business environment has become unstable, as many supply chain risks unravel. One
example of this is the row between Unilever and Tesco. In view of the currency depreciation,
Unilever, the Anglo-Dutch multinational and one of the biggest manufacturers and suppliers of
processed food, announced an increase in the price of many of its products. In response, Tesco,
the supermarket giant, and one of Unilever’s biggest customers, refused to carry Unilever’s
products on its shelves. There was an immediate decrease in the share price of both companies.
The ramifications of BREXIT are still unfolding. Many recent reports indicate that procurement is
in turmoil.
“With BREXIT-influenced supply chain disruption already underway, procurement departments
are on the front line. Almost half of European businesses with UK suppliers are already finding
replacements elsewhere in the EU” (Hurley, 2017).
“The [CIPS] survey found more than a third of UK supply chain managers intend to respond
to BREXIT by pushing supplier costs lower and 11% admitted part of their operations may no
longer be viable” (Green, 2017).
Source: BBC and various news websites
Over to you
Activity 1:
In the modern economic landscape, there are three types of buyers92 as shown in Figure 1. Between
them, these buyers purchase a variety of goods and services to achieve operations objectives.
According to their application and use, items purchased can be classified into six categories
(Harland, 1997)93 (see Table 1).
92 Marrian, J. (1965), “Marketing Characteristics of Industrial Goods and Products”, in Wilson, A. (ed)., The Marketing of
Industrial Products. London: Hutchinson
93 Harland, C. (1997), “Supply Chain Management”, in Slack, N. (ed.), Encyclopedic Dictionary of Operations Management,
p.160–161: Blackwell
78 © ABE
Procurement Chapter 3
Industrial buyers
Procure to meet customers’ needs with
1 tangible goods
(primary and secondary sectors)
Institutional buyers
Procure to meet customers’ needs with
2 intangible services
(tertiary sector)
Intermediate buyers
Procure products for resale to industrial
3 or end-customers
(wholesalers, retailers etc.)
Raw material Inputs that have not been transformed in any way before purchase.
Finished products Ready-to-consume items that become the input for physical
distribution systems or outbound logistics.
Capital items Usually high value items “which are purchased infrequently” but are
essential in the transformation process. Examples include plant and
machinery.
Robinson (1967) classifies purchases according to the buying organisation’s familiarity of goods and
services. These are listed in Table 2 and shown in Figure 2.
© ABE 79
Chapter 3 Procurement
Table 2: Types of purchases based on familiarity of organisation with the purchase Revision
on the go
Modified
rebuy
Straight
New buy
rebuy
On a fundamental level, the terms “buying”, “purchasing” and “procurement” are synonyms.
However, the contemporary competitive landscape is a “complex, inter-organisational setting of
numerous suppliers”94 and, in this context, many experts prefer to use the term “procurement”,
and treat it as a set of strategic activities proactively engaged with the dynamic supply market
and responding to it in a creative manner in order to make a positive contribution to the focal
organisation’s performance (van Weele, 2009).95
94 Svahn, S. and Westerlund, M. (2009), “Purchasing Strategies in Supply Relationships”, Journal of Business & Industrial
Marketing, Vol. 24, Iss. 3/4, p. 173
95 Van Weele, A. (2009), Purchasing and Supply Chain Management: Analysis, Strategy, Planning and Practice. 5th Rev.
Ed., Cengage Learning
80 © ABE
Procurement Chapter 3
all activities required in order to get the product from the supplier
to its final destination. It encompasses the purchasing function, incoming inspection,
and quality control and assurance, allowing companies to make supplier selection
decisions based on total cost of ownership (TCO), rather than price.
Based on this perspective, purchasing becomes a sub-activity of the larger procurement function,
and procurement is an integral sub-function of supply chain management. In other words,
purchasing has evolved, and its scope has grown (Lysons and Farrington, 2005).96 Many prefer to
use the term “contemporary purchasing” (in contrast to “traditional purchasing”). In this study
guide, we will use the terms “purchasing” and “procurement” interchangeably, unless the context
demands a specific use.
Attribute Significance
NEED TO KNOW
Purchases can be classified into three categories, according to the buying organisation’s
familiarity with the goods and services to be purchased: straight rebuy, modified
rebuy, and new buy. Revision
on the go
96 Lysons, K. and Farrington, B. (2012), Purchasing and Supply Chain Management, 8th Ed. Pearson
97 Chick, G. and Handfield, R. (2014), The Procurement Value Proposition: The Rise of Supply Management, 1st Ed.
Kogan Page
© ABE 81
Chapter 3 Procurement
Over to you
Activity 2: Purchases
1 Write down six items (goods and services) that a large manufacturing organisation
might need to purchase, and classify each item according to its application and use.
2 A bank wants to purchase special chairs for its disabled employees to use at the
counter. In which category will you put these chairs?
3 What is the most important and widely used capital item in a software development
organisation?
Purchasing procedures
Purchasing – from straight rebuys to new buys – is a highly complex procedure and documentation-
driven activity. In most medium and large organisations, the momentum of purchasing is established
in the annual departmental and divisional budgets. After the budgets are prepared, the activity of
actual purchasing is divided into phases. According to Lysons (1996)98, there are three post-budget
phases (as shown in Figure 3).
98 Lysons, K. (1996), Purchasing, 4th Ed., pp.72–73. London: M&E Pitman Publishing
82 © ABE
Procurement Chapter 3
The important documents involved in the process of purchasing are shown in Figure 4
and explained in Table 4.
Purchasing documents
Purchase
Bill of materials Enquiry forms Purchase orders
requisitions
Purpose: To indicate the Purpose: Similar to Purpose: Issued to Purpose: This document
specific need and set purchase requisition, potential suppliers gives legal status to
off the procurement but focused on request seeking information on the agreement to buy
approval process for purchase (RFP) of “price, quality, delivery” and sell. It also makes
through the purchase material “specifically for and terms for mention of the specific
department. each contract received”. commercial transaction. purchase requirements,
agreed price, delivery
date, all terms of the
transaction.
NEED TO KNOW
Purchasing has evolved from a clerical function into a strategic function. It is now
considered a sub-function of a larger procurement function. In contemporary purchasing,
the emphasis is placed on total cost of ownership (TCO) rather than price. Revision
on the go
© ABE 83
Chapter 3 Procurement
84 © ABE
Procurement Chapter 3
NEED TO KNOW
The purchasing function is the link between the focal organisation and its suppliers.
In the context of a supply network, the scope of purchasing has increased and it is
widely referred to as procurement. Revision
on the go
Over to you
Activity 3: Making a purchase order
Download a purchase order template from the internet and make a purchase order for
five different items of stationery that a small independent supermarket might need.
Porter (1980)99 put the spotlight on purchasing strategy, and brought it into the scope of
competitive strategy in his book “Competitive Strategy”. He highlighted the need for “stability
and competitiveness of the supplier pool” through the notion of suppliers’ bargaining power (the
premise underpinning multi-sourcing), “allocation of purchases amongst qualified suppliers” (the
premise underpinning supplier assessment and selection), and “creation of maximum leverage
with chosen suppliers” (the premise underpinning partnership sourcing). Subsequently, Porter
(1985)100 elevated procurement as a key support activity in the definitive “value chain” model,
and an important contributor to cost leadership and the differentiation dimension of business
(competitive) strategy.
Porter (1998)101
Peter Kraljic’s authoritative article “Purchasing must become supply chain management” established
the importance of integrating purchasing and supply chain management as businesses became
© ABE 85
Chapter 3 Procurement
exposed to intense rivalries caused by new entrants in the aftermath of deregulation. Ramsay (2001)102
calls this shift in thinking as the end of purchase function’s “strategic irrelevance”.
Kraljic (1983)103
As the brief extract from the article indicates, organisations operate in a turbulent environment.
There are multiple forces that threaten operations and supply chains. The challenges are compounded
as maximising sales becomes more difficult due to increasing rivalry and product parity. It is, therefore,
imperative that organisations look for multiple drivers of profitability.
According to Lysons (1996)104, the extent to which procurement makes a strategic contribution to
superior performance is determined by specific factors shown in Table 5.
102 Ramsay, J. (2001), “Purchasing’s strategic irrelevance”, European Journal of Purchasing and Supply Management, 7(4),
pp. 257-263
103 Kraljic, P. (1983), “Purchasing Must Become Supply Chain Management”, Harvard Business Review, Sept. 1983 Issue
104 Lysons, K. (1996), Purchasing, 4th Ed. London: M&E Pitman Publishing
86 © ABE
Procurement Chapter 3
The amount of total materials bought is a The amount of total materials bought is a
large percentage of the organisation’s total small percentage of the organisation’s total
expenditure expenditure
Product innovation and fashion are critical Products are staid and stable
to success
According to Kraljic (1983)105, procurement becomes strategic for the focal organisation when
a large volume of critical items is required at a competitive price in either an uncertain or
technologically fast-paced environment.
Joyce (2006)106 gives four reasons that explain why procurement is now viewed as a strategic
function.
• Bought-out material makes up a substantial proportion of the product costs, and therefore,
the only way to source high quality material at the minimum price is with superior
procurement.
• Supplier assessment and selection is critical for obtaining high quality material.
• Supplier management can lead to deliveries of material at the right time.
• Supplier participation can be a catalyst for superior product design, and as a consequence, a
way of gaining a competitive advantage in marketplace.
Joyce (2006)107
105 Kraljic, P. (1983), “Purchasing Must Become Supply Chain Management”, Harvard Business Review, Sept. 1983 Issue
106 Joyce, W.B. (2006), “Accounting, Purchasing and Supply Chain Management”, Supply Chain Management: An
International Journal, Vol. 11, Iss. 3, pp. 202–207
107 Ibid.
© ABE 87
Chapter 3 Procurement
Advocates of contemporary purchasing argue that purchasing should be aligned with the
corporate and business strategies of the organisation (Fung, 1999)108. The helps the focal
organisation’s operations achieve its objectives, by making four key contributions (Harland,
1997) as shown in Figure 6.
NEED TO KNOW
Procurement becomes more strategic to the organisation if the items have high critical
importance and/or the competitive pace of business environment is fast. REVISION
on the go
Strategic procurement
Monitoring and
Identifying Developing Evaluating
interpreting
supply market trends transforming inputs supply alternatives “what to make and
essential for and sources what to buy”
operations
Strategic procurement evaluates several aspects of critical decisions about the supply chain.
Some of these are listed in Table 6.
According to Cousins and Spekman (2003)109, there is a strong and direct link between purchasing
efficiency and performance. “Typically a 1% cost saving by purchasing equates to a 10% increase in
sales” (cited in Lindgreen, Revesz and Glynn, 2009).110
108 Fung, P. (1999), “Managing Purchasing in a Supply Chain Context: Evolution and Resolution”, Logistics Information
Management, Vol. 12, Iss. 5, pp. 362–367
109 Cousins, P.D. and dan Spekman, R. (2003), “Strategic Supply and The Management of Inter and Intra Organisational
Relationships”, Journal of Purchasing and Supply Chain Management, Vol. 9, p. 20
110 Lindgreen, A; Révész, B. and Glynn, M. (2009), Journal of Business & Industrial Marketing, Vol. 24, Iss. 3/4, p. 149
88 © ABE
Procurement Chapter 3
Purchasing objectives
Harland (1997)112 states that there are five purchasing objectives. These are shown in Figure 7 and
the significance of these objectives is explained in Table 7.
Right
price
Right Right
source time
Purchasing
objectives
Right Right
quantity quality
111 Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed. FT/Prentice Hall
112 Harland, C. (1997), “Supply Chain Management” in: Slack, N. (ed.). Encyclopedic Dictionary of Operations
Management, Blackwell, p. 210–211
© ABE 89
Chapter 3 Procurement
According to Lysons (1996)113, the generic purchasing objectives must be translated into specific
objectives that represent corporate objectives. Some examples of these specific objectives are
included in Table 8.
Transition from speciality markets to Evaluate suppliers with larger capacity, and
mass markets willing to supply in a manner that does not result
in excessive inventory costs
Divestment from production activities Seek reliable and responsive supplier capable of
without losing market share due to partnership sourcing, and willing to conform to
volume or quality purchasing policy
Purchasing strategy
113 Lysons, K. (1996), Purchasing, 4th Ed. London: M&E Pitman Publishing, p. 14
114 Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall, p. 381
115 Ibid.
90 © ABE
Procurement Chapter 3
Managers at ABC studied the supply market and found that the multinational textile giant
Coats Viyella specialises in serving clothing manufacturers with threads and all associated
services. Their unique propositions are the “pay-as-you-use” price structure on the threads
and on-site thread-related repair services on the production line. Coates Viyella works on
a partnership model and performs in tandem with its customers’ production schedules
because of the nature of the partnership agreement that emphasises transparent flow
of information between the buyer and supplier. By taking full responsibility of order
processing, storage and transportation logistics, it allows its customers to focus on their
core activity of manufacturing clothes.
The managers at ABC can see the value in outsourcing activities related to thread.
Adapted from: Lowson (2002)
Traditional purchasing has primarily been a support role that sought to reduce the “spend” on
bought-out material. Contemporary purchasing (procurement), however, has a bigger ambit. It
strives to contribute to revenue by sourcing materials that have a positive effect on value creation
(Johnsen, Howard and Miemczyk, 2014).116
The foundation of purchasing strategy is the growing belief that purchasing decisions can
contribute to the achievement of corporate goals if purchasing is integrated with corporate and
business strategy (see Table 8) (Lowson, 2002).117 Therefore, suppliers and sourcing (purchasing),
along with customers and competitors, are now treated as the trio of “the strategy triangle” that
work in tandem to achieve corporate objectives (Tesfay, 2014)118 (see Figure 8).
Customers
marketing
Focal
firm
Competitors Suppliers
competitive sourcing and
benchmarking partnering
116 Johnsen, T.; Howard, M. and Miemczyk, J. (2014), Purchasing and Supply Chain Management: A Sustainability
Perspective. Routledge.
117 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage, p. 80: Routledge
118 Tesfay, Y.Y. (2014), “Environmentally friendly cost efficient and effective sea transport outsourcing strategy: The case of
Statoil”, Transportation Research Part D: Transport and Environment, Volume 31, pp.135–147.
© ABE 91
Chapter 3 Procurement
The formalisation of purchasing strategies started with the understanding that the purchasing of
different types of items should be treated differently. ABC analysis is one of the techniques (see
Chapter 4) that classifies items into A, B and C classes, with A class items having the highest value
and C class having the lowest value (Harland, 2002).
Kraljic’s portfolio
The notion of purchasing strategy got a boost when Kraljic (1983)119 devised a 2 × 2 portfolio matrix
that classifies items into four types (Figure 9) and mapped them on two parameters: profit impact
and supply risk (see Table 9).
Kraljic’s matrix brings “category management” into the purchasing function, and sets in motion a
strategic process that makes a critical scrutiny of all the materials and products the organisation
purchases from external suppliers. The emphasis is on cross-functional involvement and external
suppliers’ participation in achievement of organisational goals (O’Brien, 2015).120
O’Brien (2015)
Over to you
Activity 4: Co-ordinating purchasing
119 Kraljic, P. (1983), “Purchasing Must Become Supply Chain Management” Harvard Business Review, Sept. 1983 Issue
120 O’Brien, J. (2015), Category Management in Purchasing: A Strategic Approach to Maximise Business Profitability, 3rd
Ed. Kogan Page
121 Ibid.
92 © ABE
Procurement Chapter 3
High
Leverage items Strategic items
Exploit profit Explore partnership
potential sourcing and/or
diversification
Profit impact
Low
Key factors resulting in an increase in the number of potential suppliers across the
world include market reforms in a number of low-cost countries, globalisation, easy access to
finance and technology. Such a landscape makes it easier for organisations to resolve the “do or
buy” strategic dilemma, however, it also gives rise to a complex network of suppliers. This makes
it imperative for the focal organisation to develop:
• an effective supplier relationship management; and
• a coherent supply strategy.
© ABE 93
Chapter 3 Procurement
Applying supplier preferencing is possible with a mix of judgement (for assessing attractiveness)
and information (data about the focal organisation’s share of the supplier’s total revenue).
Supplier preferencing
The focal organisation’s attractiveness to The supplier’s dependency on the focal
the supplier organisation
Evaluated in terms of “high volume, high Assessed for how the supplier values the
spend, profit margin”, brand and other focal organisation’s magnitude of spend
intangible reasons, ease of transactions relative to its total revenue from all suppliers,
(including receipt of timely payments), and the financial and strategic impact to the
strategic alignment, and geographic supplier, if the focal organisation terminates
proximity. the relationship.
The focal organisation can be classified into one of the four categories based on these two dimensions.
This classification is shown in Figure 10.
In many ways, the supplier preferencing matrix can be likened to the widely known BCG matrix
that categorises businesses of a diversified organisation into “cash cow”, “star”, “question mark”
and “dog”. It is true to say that the supplier will invest more resources into and create more
value for customers who fall into the “core” and “development” categories than “nuisance” and
“exploitable” categories.
High
create value create value
Development Core
focal firm viewed focal firm treated
as potentially attractive as a strategic client
Attractiveness
Nuisance Exploitable
supplier does not continues relationship
value relationship for own gain
dog* question mark*
Low
94 © ABE
Procurement Chapter 3
NEED TO KNOW
Purchasing strategy is effective only if proper analysis of the critical importance of
products and the buyer-supplier relationship is carried out. Revision
on the go
Supply strategy
Harland describes supply strategy as a three-dimensional route to effective procurement. These
dimensions are shown in Figure 11.
Extent of Type of
intervention intervention
required required
(extensive, (operational,
moderate or managerial,
minimal) strategic or
policy)
Level at which
intervention is
required
(individual, division or
firm level)
The extent of intervention in supply strategy can be extensive, moderate or low. The range of
intervention responses is shown in Table 11, where 1 is the lowest level of intervention and 5 is
the highest.
© ABE 95
Chapter 3 Procurement
There are several purchasing strategies, two of which are in the scope of this syllabus. These are:
• “Do or buy” purchase strategy
• Single versus multi-sourcing purchase strategy (discussed in section 3.2).
Slack (1997)123
96 © ABE
Procurement Chapter 3
Vertical integration This is a purely strategic decision that redefines the boundaries
of the organisation. If the organisation decides to focus on a
limited, manageable set of tasks with the aim of developing
sharper capabilities and core competences, non-core activities are
outsourced to specialist suppliers (discussed later in this chapter).
Table 12: Three factors that influence a “do or buy” decision Revision
on the go
Table 13: Other factors that influence a “do or buy” decision Revision
on the go
124 Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed., FT/Prentice Hall
© ABE 97
Chapter 3 Procurement
Over to you
Activity 5: Do or buy
An organisation currently manufactures 10,000 components per annum. The costs are
as follows:
Costs Total ($)
Direct material and labour cost 220,000
Manufacturing overhead costs
Variable 10, 000
Fixed 80, 000
Non-manufacturing overheads 50 ,000
Total costs 360, 000
A supplier has offered to supply 10,000 components per annum at a unit price of $30
for three years.
If the components are outsourced, the direct labour will be made redundant. The
organisation also saves direct material costs and variable overheads. Fixed manufacturing
overheads would be reduced by $10,000 per annum, but non-manufacturing costs would
remain unchanged. The facility has NO other use.
Is it better for them to make or buy the components?
98 © ABE
Procurement Chapter 3
• Who can supply? The physical or electronic sources that can help
the focal organisation to find suppliers.
• What can be the supply arrangements? Purchasing strategy after a strategic analysis
using techniques such as Kraljic’s portfolio
matrix and supplier preferencing.
• How to evaluate suppliers? The key factors that are involved in supplier
assessment (see the following section on
supplier assessment).
Catalogues These are easy to find and contain “valuable technical information”.
Trade directories These are useful tools for new buys, “unusual or occasional special
requirements and emergency items”.
Yellow Pages These have become very popular in recent years and are often the first
source that the purchaser accesses. They offer a comprehensive list of
suppliers in multiple categories.
Databases These can be internal or external. There can be exclusive databases
dedicated to specific product categories.
Exhibitions These are physical short-duration events that offer a great opportunity
to compare competing material and products, and meet suppliers for
preliminary discussions. Exhibitions are usually focused on product
categories related to a particular sector (e.g. construction material).
Trade journals These are highly focused sources of supply and can often directly lead
to the suitable suppliers.
Salespersons and Very common sources that can offer valuable information and lead to
references the potential suppliers.
125 Lysons, K. (1996), Purchasing, 4th Ed., p. 236. London: M&E Pitman Publishing
© ABE 99
Chapter 3 Procurement
Over to you
Activity 6: Sources of supply
A large supermarket plans to buy two refrigerated delivery vans. What do you think
would be the best source of information about suppliers?
Supply arrangements
Supply arrangements are at best determined by the strategic analysis using the techniques
discussed in the purchasing strategy section. The focal organisation can adopt a combination of
supply arrangements based on three sets of alternatives mentioned by van Weele (2008)126, and
explained in Table 15.
Global versus local This is determined by several factors such as the type of
sourcing product and total cost of ownership. From the perspective of a
western organisation based in a highly industrialised economy:
• local sourcing is preferred when the product is high
technology, product specifications change frequently, flexible
and precise delivery is required and communication is critical
• global sourcing is preferred for “bulk or standardised”
products, as the price difference offered by local and
international suppliers is large, and economies of scale can be
gained from bulk purchasing and long distance transportation.
Single versus multi- The choice between these two alternatives is a direct outcome
sourcing of supply chain risk analysis (see Chapter 2), portfolio analysis
and supplier preferencing. Using a sole supplier has a high
level of risk, while having multiple suppliers brings a high cost
of administration. See the following section on single and
multi-sourcing.
126 van Weele, A.J. (2010), Purchasing and Supply Chain Management, 5th Ed. Cengage Learning
100 © ABE
Procurement Chapter 3
Partnership versus The choice between these two alternatives is again a strategic
competitive bidding decision that is determined by analysis. The focal organisation’s
openness to sharing vital information with a strategic supplier,
who may also be supplying to competitors, is a key factor in
deciding to form a close and mutually beneficial partnership
that emphasises greater supplier involvement in decisions
related to product design and materials.
Competitive bidding involves a number of suppliers. This is
adopted if the organisation wants to spread the risk of requiring
a large quantity by allocating small volumes to multiple “pre-
approved” suppliers, based on price attractiveness. Competitive
bidding is also called “tendering”. The invitation issued by the
buyer to suppliers is called the “tender notice”.
Supplier assessment
It is not possible to design an outcome-driven supply chain without appropriate suppliers. According
to Freytag and Mikkelsen (2007)128, two factors underpin the focal organisation’s assessment and
selection of suppliers:
• the extent to which the focal organisation creates value by itself;
• the extent to which value can be created in relationships with suppliers;
However, assessing and selecting suppliers is not a straightforward task. The decision involves
trade-offs (see Figure 13) because the degree of “superiority” between suppliers is mostly small.
The process, therefore, involves identifying short-term and long-term factors, and rating them for
their criticality (Slack, Chambers and Johnston, 2010)129. These factors are listed in Table 16.
© ABE 101
Chapter 3 Procurement
Supplier is
dependable
High purchase
costs
f ownership
Total cost o
Low overall
costs
Supplier is
expensive
In many instances (e.g. when using a new supplier), the focal organisation may decide to assess
and select the supplier based on qualitative factors such as capability demonstrated in the prior
experience of the supplier’s executive team.
Over to you
Activity 7: Supplier selection
Your friend Chang plans to open a grocery shop. What advice would you give him about
selecting suppliers?
102 © ABE
Procurement Chapter 3
Single-sourcing: As the name indicates, this involves sourcing supplies from a single supplier.
Single-sourcing is different from “sole-sourcing”. The latter is where there is a monopoly supply
market so that the focal organisation has no choice of supplier.
Single sourcing is the practice of obtaining all of one type of input product,
component or service from a single supplier.
Multi-sourcing: This is in contrast to single-sourcing. The focal organisation has multiple suppliers.
Both single-sourcing and multi-sourcing have their advantages and disadvantages (see Table 17).
Single-sourcing Multi-sourcing
Advantages Advantages
© ABE 103
Chapter 3 Procurement
Single-sourcing Multi-sourcing
Advantages Advantages
Disadvantages Disadvantages
• The focal organisation faces a greater • Economies of scale are lost as order size
supply chain risk as any kind of failure at is distributed among many suppliers.
the supplier’s end can disrupt operations.
• Administrative expenses are greater
• Bargaining power lies with the supplier, than for single-source strategy. There
especially when it has been chosen for is a risk of creating an opportunistic
special reasons, which raises the risk of a business relationship with suppliers if the
sudden increase in price. focal organisation frequently changes
the transaction volume. If suppliers are
• It restricts the access to critical uncertain about orders, their commitment
information on supply market trends, may be low.
prices and new materials.
• Some suppliers may be reluctant to share
• Suppliers can take advantage of the information due to the risk of it leaking
situation and reduce their commitment to to their rivals in the focal organisation’s
delivery deadlines and/or quality. network.
There is no single one-size-fits-all sourcing strategy in supply chain management. The focal
organisation can switch from single to multi-sourcing, or vice versa, and this decision could be
132 Johnsen, T., Howard, M. and Miemczyk, J. (2014), Purchasing and Supply Chain Management: A Sustainability
Perspective. Routledge
104 © ABE
Procurement Chapter 3
triggered by one or more factors. Some of these factors include purchasing and quality assurance
procedures, location issues, and performance and reliability of the supplier. However, while single-
sourcing facilitates lean operations, multi-sourcing can be useful for creating a highly competent
network that strives to improve in order to survive and grow.
NEED TO KNOW
Single-sourcing and multi-sourcing are two alternative purchasing arrangements.
Both have their advantages and disadvantages. Revision
on the go
Over to you
Activity 8: Single versus multi-sourcing
Your friend from Activity 7 is planning to sell dairy products, as there is a high demand for
them throughout the year.
What advice would you give him about adopting single-sourcing or multi-sourcing for
dairy products?
Partnership sourcing
Partnership sourcing, also known as “purchasing partnership” or “supplier partnerships”, is the
focal organisation’s strategic response to manage margins in the fast-moving, hyper-competitive
environment (Ellram, 1991)133. It is viewed as the foundation for building lean operations. Four key
features of partnership sourcing are shown in Figure 14.
133 Ellram, L.M. (1991), “Supply Chain Management: The Industrial Organisation Perspective”, International Journal of
Physical Distribution & Logistics Management, Vol. 21, Iss. 1, pp.13–22
© ABE 105
Chapter 3 Procurement
Purchasing partnership
Trust and
Long-term
information
commitment
sharing
Lysons (1996)136 differentiates between traditional sourcing and partnership sourcing (see Table 18).
134 Mohr, J. and Spekman, R. (1994), “Characteristics of Partnership Success: Partnership Attributes, Communication
Behaviour and Conflict Resolution Techniques”, Strategic Management Journal, Vol. 15, Feb. Issue, p 135
135 Brown, A.D.; Boyett, I. and Robinson, P. (1994). “The Dynamics of Partnership Sourcing”, Leadership & Organisation
Development Journal, Vol. 15, Iss. 7, p. 16
136 Lysons, K. (1996), Purchasing, 4th Ed. London: M&E Pitman Publishing, p. 254
106 © ABE
Procurement Chapter 3
Based on the intensity of the link between the focal company and the supplier, partnerships are
classified into three types: co-operation, co-ordination and collaboration. Partnerships offer the
benefits of low administrative costs and “increased productivity” (Harrison and Van Hoek, 2005)137
(see Figure 15).
Long term
Information sharing
Co-ordination
Co-operation Collaboration
Partnership sourcing differs from traditional sourcing in many ways. The focus of partnership sourcing
is on building long-term supplier relationship. The highest level of partnership is a sound
collaboration in which the supplier is involved in many key decisions, including product
design and material selection. The focus of partnership sourcing is NOT on price, but
on total cost of ownership. Revision
on the go
A typical new purchasing partnership starts with “contractual trust” and crystallises into “goodwill
trust” in its mature stages (Sako, 1992).138 According to de Hemmer Gudme (2017)139, three factors
(Figure 16) determine purchasing partnerships. These are:
• long-term contribution;
• mid-term improvement;
• short-term compliance.
137 Harrison, A. and Van Hoek, R. (2005), Logistics Management and Strategy: Competing through the supply chain, 2nd
Ed. FT/Prentice Hall, p. 254
138 Sako, M. (1992), Prices, Quality and Trust. Cambridge: Cambridge University Press
139 de Hemmer Gudme, O. (2017), “A New Strategic Role for Purchasing: Business Partner for Value(s) Creation”,
Strategic Direction, Vol. 33, Iss. 2, p. 29
© ABE 107
Chapter 3 Procurement
Long-term Mid-term
contribution improvement
Competitive Costs-risks
advantage trade-off
Short-term
compliance
quality–reliability–costs
According to Brown, Boyett and Robinson (1994),141 it is imperative that the focal organisation and
its partner-supplier establish the “principles of partnership” as this has a direct and positive impact
on “the volume, quality and timeliness of information exchange”.
Over to you
Activity 9: A supplier partnership
Your friend Chang wants to adopt the strategy of selling own-brand breakfast cereals and
ready meals at his supermarket because own-brand products earn a high profit margin. Chang
also feels that the packaging of these products should be made from recyclable material.
What type of supplier partnership would you recommend to Chang? Explain your answer.
140 Gadman, S. and Cooper, C. (2005), “Strategies for Collaborating in an Interdependent Impermanent World”,
Leadership & Organisation Development Journal, Vol. 26, Iss. 1, p. 32
141 Brown, A.D. Boyett, I. and Robinson, P. (1994), “The Dynamics of Partnership Sourcing”, Leadership & Organisation
Development Journal, Vol. 15, Iss. 7, p. 15
108 © ABE
Procurement Chapter 3
Partnership sourcing benefits both the focal organisation and the supplier. Some of these advantages
are highlighted by Lysons (1996)142 and are explained in Table 19.
Purchasing advantage: The focus shifts Marketing advantage: Trust and stability
from negotiation and administration lead to better planning. This gives
to improvement and quality assurance. confidence to invest and large orders
Better planning is possible and certainty of improve commitment to fulfil buyer’s
supplies increases. requirements.
Cost advantage: This is brought about by Cost advantage: Processes are simpler, and
the ability to reduce inventory, and greater therefore, economical. Payments are certain.
control on logistics. Supplier participation Cost reduction becomes a mutual goal of
in new products and spotting market trends both parties. Customer planning leads to
are other positive outcomes. efficient logistics.
142 Lysons, K. (1996), Purchasing, 4th Ed. London: M&E Pitman Publishing, p. 255
143 Brown, A.D.; Boyett, I. and Robinson, P. (1994), “The Dynamics of Partnership Sourcing”, Leadership & Organisation
Development Journal, Vol. 15, Iss. 7, p. 16
© ABE 109
Chapter 3 Procurement
Lysons (1996) highlights three problems with partnership sourcing (see Table 20).
Confidentiality When suppliers are also part of the rival’s supply network
Subcontracting
Subcontracting involves entering into a contractual agreement with an external organisation when
the focal organisation cannot perform the activity. Bruel (2016)144 classifies subcontracting into three
types, as shown in Table 21.
In many situations, the decision to subcontract increases the cost because of the subcontractor’s
margin. It also brings the risk of not getting the supply in the required time or of the desired quality
(Slack, 1997).145
144 Bruel, O. (2016), Strategic Sourcing Management: Structural and Operational Decision Making, 1st Ed. Kogan Page
145 Slack, N. (ed.) (1997), Encyclopedic Dictionary of Operations Management
110 © ABE
Procurement Chapter 3
CASE STUDY
Subcontracting decision
Penguin Lamps manufactures two standard types of desk lamps, Type 1
and Type 2, that are manufactured on the same machines.
The budgeted demand for the next year is 4000 units of each type of lamp.
The following information relates to manufacturing one unit of each lamp.
A sub-contractor has quoted unit prices for supplying the two types of lamps as:
Type 1: $29
Type 2: $40
Since there is a shortfall in machine hour, some units of one or both types of lamps will need to
be sub-contracted if the company wants to meet the highest level of demand.
Shortfall 4,000
Machine hours saved by buying 3 hours per unit 2 hours per unit
© ABE 111
Chapter 3 Procurement
Since the extra variable cost for Type 2 lamps is lower than the extra variable for Type 1 lamps,
it is cheaper to buy Type 2 lamps.
There are enough machine hours to make all 4000 units of Type 1 lamps and 2000 units of Type
2 lamps. Therefore, 4000 hours required for production of Type 2 lamps must be sub-contracted.
From the figures in the table below, it is evident that with a mere $8000 extra cost, Penguin Lamps is
able to meet the higher level of demand for its lamps and meet the requirement of the market.
Outsourcing
112 © ABE
Procurement Chapter 3
The premise of outsourcing has been discussed as a do or buy purchasing strategy. If the focal
organisation assesses that superior performance will result from sharper strategic focus on “core
competences and unique capabilities”, the case for outsourcing some of the operations activities
becomes stronger (Lowson, 2002).146
In deciding to outsource, there is usually a trade-off between the cost advantage gained from a specialist
supplier and the loss of control. The following three important questions need to be answered to
determine if the outsourcing will deliver the desired outcome (Bruel, 2017; see Table 22).
What are the precise boundaries of the activity chosen for outsourcing?
What are the risks of outsourcing and what kind of risk mitigation is required?
Traditionally, many organisations have relied on external suppliers for some of the logistics activities
such as transportation. However, in recent years, many western organisations have outsourced
information and data processing, and even telephone and internet-based customer service,
because of increased global connectivity from information technology and telecommunications, and
a wide choice of service providers with a large pool of knowledge workers in low wage countries.
In-house offshoring means moving a part of operations to an overseas location in order to gain a cost
or skill advantage. In this case, the focal organisation acquires its own assets to perform the activity.
“Offshore outsourcing” is when the focal organisation outsources its offshore activity to an external
supplier. The organisation does not own any assets for the particular outsourced activity (Slack,
Chambers and Johnston, 2010).148
146 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage. Routledge, p.77
147 Lysons, K. and Farrington, B. (2016), Procurement and Supply Chain Management, 9th Ed. Pearson, p. 361
148 Slack, N., Chambers, S. and Johnston, R. (2010), Operations Management, 6th Ed. FT/Prentice Hall, p. 146
149 Slack and Lewis (2011), Operations Strategy, p. 271
© ABE 113
Chapter 3 Procurement
OVER TO YOU
Activity 10: British Airways’ decision to outsource its IT services
1 Do you think that British Airways should revise or retain its buy strategy on IT services?
Explain why.
2 If British Airways had to choose between maintaining its reputation and gaining an
advantage from cost efficiencies, which one should it choose?
READING LIST
• Freytag, P.V. and Mikkelsen, O.S. (2007), “Sourcing from Outside – Six Managerial
Challenges”, Journal of Business & Industrial Marketing, Vol. 22, Iss. 3, pp.187–195. (This
article will be available in your online student resources.)
• Fung, P. (1999), “Managing Purchasing in a Supply Chain Context: Evolution and Resolution”,
Logistics Information Management, Vol. 12, Iss. 5, pp. 362–367. (This article will be available
in your online student resources.)
• Kraljic, P. (1983), “Purchasing Must Become Supply Chain Management”, Harvard Business
Review, Sept. 1983 Issue
• Lysons, K. and Farrington, B. (2016), Procurement and Supply Chain Management, 9th Ed.
Pearson
• O’Brien, J. (2015), Category Management in Purchasing: A Strategic Approach to Maximise
Business Profitability, 3rd Ed. Kogan Page
• van Weele, A. (2009), Purchasing and Supply Chain Management: Analysis, Strategy,
Planning and Practice, 5th Rev. Ed. Cengage Learning
114 © ABE
Procurement Chapter 3
Summary
• Purchasing is an integral part of every organisation’s economic existence.
• Buyers purchase a variety of goods and services to achieve the operations objectives. These
include raw materials, semi-manufactured materials and components, finished products,
packaging, capital items and services.
• Purchases can also be classified according to the manner in which materials are bought: straight
rebuy, modified rebuy, or new buy.
• Purchasing is a function responsible for obtaining (by purchase, lease, or other legal means)
equipment, materials, supplies and services required for production.
• Many experts prefer to use the term procurement instead of purchasing, and treat it as a set of
strategic activities proactively engaged with the dynamic supply market and responding to the
market creatively in order to make a positive contribution to the focal organisation’s performance.
• Purchasing becomes a sub-activity of the larger procurement function, and procurement is an
integral sub-function of supply chain management.
• The attributes of contemporary purchasing (or procurement) are: proactive (rather than reactive),
relational (rather than transactional) and strategic (rather than tactical).
• There are three phases in purchasing: the notification phase, the ordering phase and the post-
ordering phase.
• The important documents involved in the process of purchasing are purchase requisitions, bill of
materials, enquiry forms and purchase order forms.
• The evolution of purchasing into procurement happened as Michael Porter and Peter Kraljic
developed influential frameworks.
• Porter put the spotlight on purchasing strategy, and brought it into the ambit of competitive strategy.
• Kraljic established the importance of integrating purchasing and supply chain management as
businesses became exposed to intense rivalries caused by new entrants after deregulation.
• The extent to which procurement makes a strategic contribution to superior performance is
determined by specific factors.
• Procurement becomes strategic for the focal organisation when a large volume of critical items is
required at a competitive price in an uncertain or technologically fast-paced environment.
• Procurement is viewed as a strategic function as bought-out material makes up a substantial
proportion of the product costs.
• Supplier assessment, selection and management are critical for obtaining high quality material at
the right time, and supplier participation can be a catalyst for superior product design.
• Strategic procurement evaluates a number of aspects of critical supply chain decisions.
• There is a strong and direct link between purchasing efficiency and performance.
• Purchasing objectives involve fulfilment of five criteria: right price, right time, right quality, right
quantity and right source.
• The generic purchasing objectives must be translated into specific objectives that represent
corporate objectives.
• Contemporary purchasing (procurement) has a larger scope than traditional purchasing, as it
strives to contribute to revenue by sourcing materials that have a positive effect on value creation.
• Kraljic’s 2 × 2 matrix brings category management into the purchasing function, and sets in
motion a strategic process that critically scrutinises all the materials and products an organisation
purchases from external suppliers.
• Supplier preferencing is also a 2 × 2 matrix that maps the supplier’s perceptions of the focal
organisation on two dimensions: attractiveness to the supplier, and the supplier’s dependency
on the focal organisation.
© ABE 115
Chapter 3 Procurement
• The two dimensions can be further classified into four categories: development, core,
exploitable and nuisance.
• Supplier preferencing is important in managing supplier relationships because it gives the
procurement function the suppliers’ view on how strategically they treat the focal organisation.
• Supply strategy has three dimensions that result in effective procurement: extent of intervention
required, type of intervention required, and the level at which intervention is required.
• The extent of intervention in supply strategy can be extensive, moderate or low.
• Purchasing strategies include: “do or buy” strategy, and single versus multi-sourcing.
• When an organisation pursues a “do” strategy, manufacturing is an in-house operation. A “do
or buy” decision determines whether to make a particular component (or perform a particular
service) or buy it from a supplier.
• Three key approaches influence do or buy decisions: operational cost-based approach, business
approach and vertical integration.
• There are a number of sources that can help the focal organisation gain access to suitable
suppliers. These include trade directories, Yellow Pages, databases, exhibitions and trade journals.
• The focal organisation can adopt a combination of supply arrangements based on three sets of
alternatives: global versus local sourcing, single versus multi-sourcing and partnership versus
competitive bidding.
• Tendering is a purchasing procedure whereby potential suppliers are invited to make an
organisation an unequivocal offer of the price and terms, which, on acceptance, shall be the
basis of a subsequent contract.
• Two factors underpin the focal organisation’s assessment and selection of suppliers: the extent
to which the focal organisation creates value by itself, and the extent to which value can be
created in relationships with suppliers.
• Assessing and selecting suppliers is not a straightforward task, as the decision involves trade-offs
because the degree of superiority between suppliers is mostly small.
• The focal organisation may decide to assess and select a new supplier based on qualitative
factors such as capability demonstrated in the prior experience of the supplier’s executive team.
• Single-sourcing is the practice of obtaining all of one type of input product, component or
service from a single supplier.
• Multi-sourcing is the practice of obtaining the same type of product, component or service from
more than one supplier in order to maintain market bargaining power or continuity of supply.
• Single-sourcing and multi-sourcing have their advantages and disadvantages.
• Partnership sourcing (also called “purchasing partnerships” or “supplier partnerships”) is
the focal organisation’s strategic response to manage margins in the fast-moving, hyper-
competitive environment.
• Four key features of partnership sourcing are: shared goals, mutual benefit, trust and information
sharing and long-term commitment.
• Three factors that determine purchasing partnerships are: long-term contribution, mid-term
improvement and short-term compliance.
• Partnership sourcing benefits both the focal organisation and the supplier in terms of
purchasing, cost and strategic advantages.
• There are confidentiality, complacency and contractual problems associated with partnership
sourcing.
• Subcontracting involves entering into a contractual agreement with an external organisation
when the focal organisation cannot perform the activity.
116 © ABE
Procurement Chapter 3
© ABE 117
Chapter 4
Logistics Management
Introduction
Logistics has a long history and military origins. According to the Merriam-Webster dictionary,
logistics means “the handling of the details of an operation”. When logistics unfolds in operations,
the details of the operation take the shape of physical movement of material and products,
including inbound transportation, handling, storage and outbound distribution. In the context
of supply chains, in which agility is the key determinant of competitive advantage, logistics is no
longer a static support function but a dynamic and strategic managerial activity. In this chapter, you
will understand the meaning and significance of logistics function and logistics management, and
learn about three specific areas of logistics (warehousing, transportation and stock).
Learning outcome
On completing the chapter, you will be able to:
4 Analyse the role of logistics and logistics management
Assessment criteria
4 Analyse the role of logistics and logistics management
4.1 Discuss the meaning of logistics
4.2 Analyse organisational logistics management considerations
© ABE
Level 5 Operations Management
150 Cebrowski, A.K. and Garstka, J.J. (1998), “Network-centric Warfare: Its Origin and Future” [online]. Retrieved from:
http://www.kinection.com/ncoic/ncw_origin_future.pdf [Accessed on 25th September 2017]
151 Christopher, M. (2005), Logistics and Supply Chain Management: Creating Value Adding Networks. 3rd Ed. Prentice
Hall/Financial Times, p. 95
© ABE 119
Chapter 4 Logistics Management
H&M’s operations does not include production. Instead, it sources its products from a network
of 790 independent suppliers, located in Asia and Europe, who manufacture clothes for H&M
using “organic cotton and recycled polyester”, thus making H&M one of the largest consumers
of these raw materials.
Since production is outsourced, the core activities in H&M’s operations include in-house design
(carried out by a team of more than 150 designers) and supply chain management. H&M is in the
business of “fast fashion”, and therefore they focus on creating a responsive and agile supply chain.
H&M does not have its own fleet of vehicles, so it purchases transport services from external
service providers. Therefore, logistics management is also an important activity in the
organisation’s operations. Since the supply network is global, many modes of transportation are
used. Sea and rail are the primary modes, but road and air are also used.
The flow of goods is from the suppliers’ factories to the company’s distribution centres,
and then to “stores and/or to regional replenishment centres”. H&M is adopting the latest
technology in its warehouses.
To achieve the best results, H&M places a significant emphasis on supply chain management.
Suppliers are managed through H&M’s production offices that are located in the same countries
as suppliers. These offices focus on order processing and aim to place each order “with the
right supplier”, safeguard the right price and good quality in its purchasing decisions, and
ensure timely deliveries of products.
Source: Adapted from H&M Annual Report (2016), Ho (2014) and Arrigo (2016)
Over to you
Activity 1: H&M
1 What vertical integration strategy does H&M adopt for production and logistics?
2 How does H&M manage its suppliers?
Christopher (2005)152
152 Christopher, M. (2005), Logistics and Supply Chain Management: Creating Value Adding Networks. 3rd Ed. Prentice
Hall/Financial Times, p. 4
120 © ABE
Logistics Management Chapter 4
Logistics management is the managerial activity that aims to get the best outcome from logistics.
Effective logistics management focuses on corporate goals, is aligned with corporate strategy and
is designed flexibly to respond to the changing environmental forces (Min and Keebler, 2000)153, as
illustrated in Figure 1.
Corporate planning
Senior
level Marketing planning
planning
Logistics planning
Demand management
Logistics
operations Stock management
execution
Warehousing and transportation
153 Min, S. and Keebler, J.S. (2001), “The Role of Logistics in Supply Chain”, in Mentzer, J.T. (ed.), Supply Chain
Management: Sage Publications
154 CSCMP Website (n.d.), “Council of Supply Chain Management Definitions and Glossary. CSCMP” [Online]. Retrieved
from: http://cscmp.org/CSCMP/Educate/SCM_Definitions_and_Glossary_of_Terms/CSCMP/Educate/SCM_Definitions_and_
Glossary_of_Terms.aspx?hkey=60879588-f65f-4ab5-8c4b-6878815ef921 [Accessed on: 25 September 2017]
155 Ross, D.R. (2015), Distribution Planning and Control: Managing in the Era of Supply Chain Management, 3rd Ed.
Springer, p. 7
© ABE 121
Chapter 4 Logistics Management
• Raw materials, • Materials sent to • Production • Finished goods • Sent from main • Reaches
manufactured the factory for processes take go to main warehouse to customer
parts, packaging, production or to place (work in warehouse regional ware-
etc. are acquired a storage location progress) house, depot or
to be sent later intermediary
Inbound logistics:
Inventory Outbound logistics: physical distribution
material management
Inbound and Two focus areas of this activity are routing and scheduling so that
outbound “shipping capacity utilisation is optimised and less-than-truckload
transportation (LTL) shipments are minimised or eliminated”.
management
Movement of goods is never separated from administration and
documentation, especially when goods move across borders.
Shipment documentation is an important responsibility of the
logistics team. Non-compliance can lead to losses arising from
fines and confiscation of goods.
Transportation that relies on third-party service providers is
successful only when the suppliers have been chosen carefully.
Fleet management When the focal organisation operates it own fleet of vehicles, the
logistics task is to balance optimum use and service levels.
122 © ABE
Logistics Management Chapter 4
Some other important logistics activities are logistics network design, supply-demand forecasting
and third-party logistics service management. Other activities that comprise logistics to a lesser
degree are “production planning and scheduling, packaging and assembly, and customer
service”. The logistics function aims to co-ordinate and optimise all activities under the logistics
umbrella, while maintaining a smooth exchange of information from other organisational
functions such as production, marketing and finance. Information technology plays a critical role
in this co-ordination, enabling logistics to meet the objectives of both operations and the focal
organisation (CSCMP, 2017).156
Co-ordination between logistics and other organisational functions is essential for smooth
operations. One example of this co-ordination is shown in Figure 3. The diagram illustrates
that “labelling” is the responsibility of the marketing function, and “transportation” is the
responsibility of logistics. However, “unit size of the package” is an overlapping decision, and
should be co-ordinated to eliminate problems related to material handling, transportation or
storage (Sezen, 2005).157
Marketing Logistics
Unit size
Labelling of the Transportation
package
NEED TO KNOW
The key activities included in the logistics function are: inbound and outbound transportation,
transport fleet management, warehouse management, order management.
The scope of logistics activities can also include production planning and scheduling,
packaging and assembly, and customer service. Revision
on the go
156 CSCMP (n.d.), “Council of Supply Chain Management Definitions and Glossary” [Online]. Retrieved from: http://
cscmp.org/CSCMP/Educate/SCM_Definitions_and_Glossary_of_Terms/CSCMP/Educate/SCM_Definitions_and_Glossary_
of_Terms.aspx?hkey=60879588-f65f-4ab5-8c4b-6878815ef921 [Accessed on: 25 September 2017]
157 Sezen, B. (2005), “The role of logistics in linking operations and marketing and influences on business performance”,
Journal of Enterprise Information Management, Vol. 18 Issue: 3, p. 351
© ABE 123
Chapter 4 Logistics Management
OVER TO YOU
Activity 2: Co-ordinating logistics
Thinking about Figure 3, write down other important activities in operations that require
close co-ordination between logistics and marketing functions.
Costs The costs of production have been decreasing, but logistics costs
have been rising (Lowson, 2002),160 so if logistics is managed well,
efficiency and productivity are enhanced, a significant decrease
in unit costs is obtained, and consequently, the focal organisation
gains a competitive advantage (Christopher, 2005).161
Internationalisation (as a The logistics pipeline is getting longer and spans many national
result of globalisation) borders with disparate infrastructures. This creates challenges
for timely deliveries (Harrison and Van Hoek, 2005).162
158 Min, S. and Keebler, J.S. (2001), “The Role of Logistics in Supply Chain”, in Mentzer, J.T. (2001) Supply Chain
Management. Sage Publications
159 Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage: Routledge
160 Christopher, M. (2005), Logistics and Supply Chain Management: Creating Value Adding Networks, 3rd Ed. FT/
Prentice Hall, p.8
161 Harrison, A. and Van Hoek, R. (2005), Logistics Management and Strategy: Competing through the supply chain, 2nd
Ed. FT/Prentice Hall
124 © ABE
Logistics Management Chapter 4
It is evident from the definition that there are several dimensions of logistics, and each dimension
has a cost. Most of these costs are a result of the intermediary service providers in the logistics
pipeline, and together affect the price paid by the end-consumer. It is, therefore, imperative that
the end-consumer should have a positive perception of the role that the intermediary processes
and activities play in creating value (Min and Keebler, 2000).
The total logistics costs (Christopher, 1985 in Lowson, 2002)163 are the sum of:
• inbound and outbound transportation costs;
• facilities costs that include warehousing, distribution centres, and handling equipment;
• inventory costs;
• material handling costs;
• packaging costs;
• administration costs for order processing and invoicing;
• managerial costs.
The importance of these logistics costs to the supply chain managers in the USA has
emerged from a 2011 survey, the results of which are shown in Figure 4.
23.00%
Transport
Administration
Inventory carrying costs
4.00% 49.00% Customer service/Order entry
Storage and warehousing
22.00%
2.00%
162 Mentzer, J.T. (2004), Fundamentals of Supply Chain Management: Twelve Drivers of Competitive Advantage.
Sage Publications
163 Christopher, M. (1985), in Lowson, R.H. (2002), Strategic Operations Management: The New Competitive
Advantage. Routledge
© ABE 125
Chapter 4 Logistics Management
Trends in logistics
Coyle et al. (2010)164 describe the growing practice of outsourcing logistics to external
organisations. Termed as third-party logistics (TPL or 3PL) providers, these organisations specialise
in the management and flow of goods. There are many benefits of buying 3PL services rather than
doing them in-house:
• the focal organisation reduces the cost of logistics activities because 3PL providers enjoy
economies of scale, and can therefore offer a competitive price to their customers;
• the focal organisation can focus on and invest resources in other strategic areas, while managing
3PL through competent managers without building large-scale physical assets (p.398).
Many organisations that have traditionally earned revenue from package delivery/courier services
or shipping have expanded the scope of their business to offer a comprehensive logistics solution
“where customers can purchase all their transportation service needs, regardless of mode or
geographic requirements.” Examples include DHL, FedEx, UPS and Maersk (p.398).
Reverse logistics involves accepting goods from the customers (e.g. when goods are damaged,
obsolete or unacceptable to the customer), and is becoming an important activity in the logistics
function of many large-scale retailers. Reverse logistics differs from conventional “forward logistics”
in terms of the location and capacity of the facilities (Coyle et al., 2010).
Over to you
Activity 3: Reverse logistics
1 List three large retailers in your country that have an explicit “returns policy”.
2 For each one, explain their warehousing and reverse logistics activities.
164 Coyle, J.J.; Novack, R.A.; Gibson, B.J. and Bardi, E.J. (2011), Transportation: A Supply Chain Perspective, 7th Ed:
Cengage Learning
126 © ABE
Logistics Management Chapter 4
Logistics strategy
Logistics strategy is the link between corporate strategy, production and distribution. According to
Lambert (1998),165 a company’s logistics strategy needs to be designed with full consideration of the
company’s basic strategy and the costs required to change that strategy. Two physical facilities that
are deployed to execute a logistics strategy are transportation and warehousing. Like other functions’
strategies, a logistics strategy aims to contribute to the focal organisation’s competitive advantage.
Ross166 highlighted some of the ways in which this is achieved, as explained in Table 3.
OVER TO YOU
Activity 4: Logistics services
Identify three companies in your country that specialise in offering logistics services
(transportation and/or warehouse) to large companies and importers.
165 Lambert, D.M.; Stock, J.R. and Ellram, L.M. (1998), Fundamentals of Logistics Management. McGraw-Hill: International
Edition
166 Ross, D.F. (2003), Distribution Planning and Control. Kluwer Academic Publishers
© ABE 127
Chapter 4 Logistics Management
Over to you
Activity 5: Logistics strategy
NEED TO KNOW
For effective performance, the logistics strategy must be aligned with the
organisation’s business strategy and corporate strategy. Revision
on the go
128 © ABE
Logistics Management Chapter 4
Transport options/modes
Transportation is the foundation of a supply chain. Even though the transportation costs make up
less than 4% of the product’s landed cost, the costs incurred in getting raw material supplies to
the production facility or getting finished goods to the retail shelves or customers’ doorsteps has a
direct effect on profitability (Coyle et al. 2010).167
Transportation is about mobility within the supply chain. Transportation accomplishes two important
physical tasks in the logistics pipeline:
• movement of material and products;
• storage of material and products.
167 Coyle, J.J.; Novack, R.A.; Gibson, B.J. and Bardi, E.J. (2011), Transportation: A Supply Chain Perspective, 7th Ed:
Cengage Learning
© ABE 129
Chapter 4 Logistics Management
Multiple modes of transportation are available to move raw material and finished products,
including, road (trucks), railroad (freight trains), air (cargo airplanes), water (container ships) and
pipelines. Transportation of a product can be single mode or multimode. The data on shipment by
transportation mode for the USA (refer to Figure 5) gives an indication of how the weight is moved,
and the share that each mode takes in this movement.
According to Coyle et al. (2010),170 the significance of transportation in supply chain and logistics
management comes from its ability to create three fundamental utilities, which each help to preserve
the product’s economic value. These three utilities are explained in Table 4.
Utility created by
Significance
transportation
Place utility Transportation efficiency affects the price of the product when it reaches
the market. More efficient transportation allows the focal organisation to
sell the products at a better or more competitive price.
Example: If food items arrive on the supermarket shelves closer to their
use-by (expiry) date because of inefficient transportation, they cannot be
sold at market price.
Time utility Efficient transportation directly affects the ability of the focal
organisation to meet the demand, particularly for goods that have
occasion-led demand. If raw materials are not delivered to meet
production lines at their full capacity, or products do not arrive on time
to “catch” the “rush” of customers, they have no economic value.
Example: Christmas tree decorations, special sweets for Eid or “diyas”
(clay lamps) for Diwali have reduced economic value if they are delivered
after the festival.
Quantity utility Appropriate transportation methods ensure that the quantity delivered
matches the quantity demanded. Transportation that is not well
designed can damage items, so that the focal organisation does not
receive the quantity they ordered. This leads to economic loss either
due to stock-out or lost sales. Logistics managers need to thoroughly
evaluate and select transport carriers to be sure that they have the
necessary equipment to deliver the right quantity.
NEED TO KNOW
Transportation gives economic value to the goods by creating place utility,
time utility and quantity utility. Revision
on the go
2971 11.74%
4361 17.23%
14866 58.72%
38 1158 0.15% 4.57%
1921 7.59%
© ABE 131
Chapter 4 Logistics Management
The advantages and drawbacks of various modes of transportation are shown in Table 5.
171 Eshkenazi, A. (2012), “A World View on Supply Chain and Procurement” [Online]. Retrieved from:
http://www.apics.org/apics-for-individuals/apics-magazine-home/magazine-detail-page/2012/12/07/a-world-view-on-
supply-chain-and-procurement [Accessed on 25 September 2017]
172 Coyle, J.J.; Novack, R.A.; Gibson, B.J. and Bardi, E.J. (2011), Transportation: A Supply Chain Perspective, 7th Ed:
Cengage Learning
132 © ABE
Logistics Management Chapter 4
OVER TO YOU
Activity 6: Transportation
What is the single most important factor in the growth of multimode transportation?
OVER TO YOU
Activity 7: Modes of transportation
© ABE 133
Chapter 4 Logistics Management
Ross (2015)173 highlights three principles that govern transportation planning. These are explained
in Table 6 and shown in Figure 6.
Economies of Larger shipments result in lower cost per unit weight. For example, the
scale cost per kilogram in a full truckload (TL) of material is less than the cost
of less-than-truckload (LTL).
Economies of Termed as the “long haul economies”, this refers to the fact that
distance shipments that travel greater distances cost less per kilogram-kilometre
because certain costs associated with the movement (e.g. landing
charges and sea port charges) do not alter with distance.
f
e so
i e
n om anc
o st
Ec di
Velocity cost
Principles of
transportation
Economics of scale
173 Ross, D.R. (2015), Distribution Planning and Control: Managing in the Era of Supply Chain
Management, 3rd Ed. Springer, p. 690
134 © ABE
Logistics Management Chapter 4
A coherent transportation strategy makes a positive contribution to the achievement of supply chain
objectives because transportation consumes “temporal, financial and environmental resources”.
Therefore, one of the key determinants of transportation is that it should take place only if the
product value is enhanced by movement (Bowersox and Closs 1996). The aim should always be to
get the products at the right place at the right time (see Figure 7).
Movement of
products
Right time
Customer
requirements
Competitive
factors +
Profitability
focus Right place
Product
Product loss Product damage Delivery delay
contamination
Due to theft or Due to improper Due to natural or Often due to complex
negligence. The physical handling. man-made factors and dispersed supply
damage can be Monetary gain while goods are network. Disrupts
far greater than cannot be expected in transit and out production, and lowers
the monetary from damaged of control. Can productivity, leading to
value of goods goods. There is also result in bad press financial loss.
lost, as there is a an administrative if not detected and
risk of damaging cost associated with contained.
the organisation’s claims.
reputation.
174 Coyle, J.J.; Novack, R.A.; Gibson, B.J. and Bardi, E.J. (2011), Transportation: A Supply Chain Perspective,
7th Ed: Cengage Learning
© ABE 135
Chapter 4 Logistics Management
Product
Product loss Product damage Delivery delay
contamination
Examples
Product theft Equipment Climate control Congestion
accidents failure
Shipment jettison Poor freight Product tampering Poor weather
handling
Piracy and Faulty equipment Contaminants Equipment
hijacking loading malfunction
According to Coyle et al. (2010), the transport risk management process involves the four steps
shown in Table 8.
Warehousing
The fundamental premise that underpins the warehousing activities is that demand is never
continuous, and therefore, to meet customer requirements at all times – especially in response to
seasonality and sudden surge in demand – the organisation needs a system to stockpile raw material
and finished goods.
175 Coyle, J.J.; Novack, R.A.; Gibson, B.J. and Bardi, E.J. (2011), Transportation: A Supply Chain Perspective,
7th Ed: Cengage Learning
136 © ABE
Logistics Management Chapter 4
Warehousing is seen to be a “business within a business” (Ross, 2003)176. Its key properties are:
• high capital investment;
• the magnitude of physical assets.
In the simplest terms, a warehouse is “a place for the reception, delivery, consolidation, distribution
and storage of goods and cargo”, and, warehousing is “the storing of goods and cargo”.177
However, these definitions present a static view of warehousing.
Ross (2003)
According to Ross (2003), the traditional perception of warehousing is led by the notion that
warehouses are cost centres. However, contemporary warehouses are no longer a mundane facility for
storing material and products, but “dynamic fulfilment centres” capable of “logistic postponement”
and operating in an environmentally sustainable manner (p. 606). In a geographically diverse, outcome-
driven supply chain, warehousing must play a proactive role within logistics. Organisations that adopt
a supply network approach to compete in the marketplace treat warehousing as a “fundamental
strategic source of competitive differentiation and marketplace leadership” (p. 536).
NEED TO KNOW
Warehousing involves high capital investment and significant physical assets.
Revision
on the go
Over to you
Activity 8: Logistic postponement
176 Ross, D.F. (2003), Distribution Planning and Control. Kluwer Academic Publishers
177 (2008) “Glossary of Shipping Terms” [online] Retrieved from: https://www.marad.dot.gov/wp-content/uploads/pdf/
Glossary_final.pdf [Accessed on: 25 September 2017]
178 Garg, A. and Tang, C. S. (1997), “On postponement strategies for product families with multiple points of
differentiation”, IIE Transactions, 29, 641– 650
© ABE 137
Chapter 4 Logistics Management
2 Prepare and deliver a two-minute talk to your class about the example you found.
Ross (2003)179
Broadly, there are three types of warehouses, shown in Figure 8. Some of the features of these
types of warehouses are presented in Table 9. Whether the focal organisation chooses to own and
operate its own warehouses, or rent them from third-party logistics (TPL) providers is a strategic
decision that is similar to a “do or buy” decision (Ross, 2004).
179 Ross, D.F. (2003), Distribution Planning and Control: Kluwer Academic Publishers
138 © ABE
Logistics Management Chapter 4
High capital investment, TPL providers are specialists Offer the advantages of both
however, cost-effective for who experience economies private and public warehouses
high distribution volume. of scale and can therefore via a long-term contractual
respond quickly to needs, and arrangement between the
Can suffer from full offer a low-cost alternative to focal organisation and the
capacity. company-owned warehouses. TPL provider.
Warehousing performs four key functions (Min and Keebler, 2001),180 explained in Table 10.
Stockpiling This refers to the storage of raw material and finished products.
Stockpiling allows the organisation to deal with discontinued demand,
and to achieve economies of scale from bulk purchases.
© ABE 139
Chapter 4 Logistics Management
Ross (2003)181
SU PP LY
Reorganised
Trans-loading in a
SU PP LY
warehouse Shipment
Ross lists important questions that a logistics team should ask in order to achieve effective and
efficient warehousing. For example, they need to know:
• the number and type of warehouses required;
• the planned level of use of the warehouse.
Location
The sole focus of the decision about a warehouse’s location is the organisation’s strategic goals.
With this in mind, the key parameters that are evaluated for “location optimisation” include
inbound transportation costs, proximity to customers (e.g. retail outlets), availability of inventory,
flexibility to respond to the dynamic market conditions (e.g. “to be easily phased down or brought
up”) (Ross, 2015).182
Warehousing management
Warehousing management involves operational management and strategic management. According
to Ross (2015), warehousing assets can contribute to the focal organisation’s profitability only when
warehousing managers are included in the strategic planning process, and made fully aware of the
organisation’s “other functional business plans.” Two warehousing strategies are stated in Table 11.
181 Ross, D.R. (2015), Distribution Planning and Control: Managing in the Era of Supply Chain Management, 3rd Ed.,
p. 620: Springer
182 Ibid.
140 © ABE
Logistics Management Chapter 4
Total system The managerial challenge is to create warehousing facilities so that the
costs “inventory and transportation costs” do not exceed the value obtained
from increasing the number of warehouses in the distribution network.
Since there is a limit to which costs decrease in relation to increases
in the number of warehouses, warehousing managers seek the “least-
cost point” to avoid a situation where they have to make a trade-off
between market responsiveness and total logistics cost.
Voortman (2004)183
Voortman (2004) highlights two key areas of warehouse operational management, which are listed
in Table 12. The costs associated with operating a warehouse are shown in Figure 10.
Equipment Plant
Utilities Personnel Security
maintenance maintenance
© ABE 141
Chapter 4 Logistics Management
Storage
As mentioned earlier, use of storage space is a measure of warehouse productivity. Managers must
be aware of the ratio of used warehouse space to available space. The benchmark is that if used
warehouse space drops below 80%, there is a negative impact on the warehouse’s productivity and
an increase in costs due to “damage and mispicks”. In addition, market responsiveness may decline
because of inappropriate slotting of products due to space constraints (Prince, 1998).184
Planning
Forecasting
Forecasting is a planning tool that is used to manage future uncertainties. Forecasting is carried out
by extrapolating either historic data or management’s assumptions. Forecasts are different from
budgets or short-term plans, but can be useful when preparing budgets.
Investopedia (2017)185
Approaches to forecasting
There are two broad approaches to forecasting, which are explained in Table 13.
184 Prince, M. (1998), “Logistics Excellence”, in Tompkins, J.A. and Smith, J.D., (1998), The Warehouse Management
Handbook, 2nd Ed: Tompkins Press
185 Investopedia (2017), “Forecasting” [online]. Retrieved from: http://www.investopedia.com/terms/f/forecasting.asp
[Accessed on: 25th September 2017]
142 © ABE
Logistics Management Chapter 4
These are some of the methods used. These are some of the methods used.
• Panel approach. This involves a panel or a • Time series method. A method based on
group of people brought together as an the “assumption of continuity” (Scott,
informal focus group where opinions are Lundgren and Thompson, 2011). The
expressed freely. premise is that the trends of demand
in the past are an indicator of future
• Delphi method. This is a formal qualitative
demand trends. In other words, historic
approach where experts’ opinions are
demand can be helpful in estimating
collected through questionnaires, emails
future trends in demand.
or other indirect methods. This approach
does not involve face-to-face meetings • Causal modelling. This method involves
and therefore participants are less likely identifying relationships between
to be influenced by others in the group variables in order to understand which
variables have an effect on other variables
• Scenario planning. This approach is used
(e.g. if Variable A changes, this may
for long-range forecasting. Participants in
cause a change in Variable B). Causal
a panel think up several possible future
relationships may be simple or complex.
scenarios, which they then discuss and
Causal modelling is not within the scope
analyse to identify risks and mitigation
of this syllabus.
strategies.
Demand management
Organisations need to deal with fluctuations in demand. Demand planning can lead to “considerable
supply chain savings” (Mentzer and Moon, 2005). Slack, Chambers and Johnston (2010) offer two
approaches to demand management, which are explained in Table 14 and Table 15.
Using this approach, the organisation overlooks the demand fluctuations and operates at
a constant or uniform activity level throughout the planning period. As a result, there are
no changes in the resources required and production is consistent. Unsold, non-perishable
goods produced are transferred to finished goods stock to be sold at a later date.
© ABE 143
Chapter 4 Logistics Management
Advantages Disadvantages
This is the opposite of the level capacity plan approach because capacity is not constant but
is matched at each stage to the fluctuations in demand. In other words, the level capacity is
adjusted to match the level of demand using different methods, which include:
• changing the idle time and overtime depending on the demand at a specific time;
• flexibility in staffing (increasing or decreasing manpower according to need);
• employing temporary or part-time employees, and ensuring full-time employees work
longer hours;
• subcontracting.
As the level capacity varies from time to time, organisations need to manage their resources
in line with these changes. Organisations generally do not prefer a pure chase demand
approach especially if they produce non-perishable products or ones that can be easily
stocked.
Advantages Disadvantages
144 © ABE
Logistics Management Chapter 4
Advantages Disadvantages
Stock levels
Stock is also known as inventory. It is defined as:
The focal organisation’s need to maintain stock is determined by the nature of its business.
Manufacturing and retail organisations need to stockpile, and stock makes up a sizeable part
of their total assets. While there may be some organisations where the level of stock required
remains fairly stable, there are others where stock levels vary over the year due to seasonality of
demand. The production system adopted by the manufacturing organisation also influences the
level of stock.
Toyota
On a broad level, there are three types of stock in a manufacturing organisation. The APICS definition
of each one is presented in Figure 11.
© ABE 145
Chapter 4 Logistics Management
• “Raw materials require added • “WIP refers to goods in • “Finished goods are those
value or labour to be various stages of completion, on which all manufacturing
converted into useable parts. including all material that has or service operations have
The generally accepted been released for initial been completed. They are
accounting principles view of processing and processed products available for delivery
raw materials is as purchased material awaiting final to the customer.”
items or extracted materials inspection. A value-added
that are converted into process applied to a raw
components and products material is considered WIP.”
through manufacturing.”
Over to you
Activity 9: Stock
1 D
ownload the latest annual reports (available on websites) for a manufacturing
company, a large retail company, a supermarket and a utility provider.
2 What is the percentage of stock in the total assets of each of these companies?
3 Why are there differences in the stock levels?
146 © ABE
Logistics Management Chapter 4
Category Definition
Buffer stock or “safety Stock required to cope with fluctuations in supply and demand or
inventory” to manage uncertainties in the demand and lead-time.
Cycle stock The average inventory required when products are made in
batches. This ensures smooth production even when the production
process is not able to provide all items simultaneously.
Pipeline stock This type of stock is required because of the lead-time between
the placing of an order with the supplier and delivery of the items
to the organisation. This covers the shortfall in stock when supplies
are in transit.
Anticipation stock This is primarily used when a business needs to manage increased
seasonal demand. The demand is anticipated and predictable
to an extent. This type of stock is used when there are large
fluctuations in demand.
© ABE 147
Chapter 4 Logistics Management
NEED TO KNOW
Stock can be classified into five categories: buffer stock, cycle stock, pipeline stock,
anticipation stock and decoupling stock. Revision
on the go
Costs and risks of holding stock Cost and risk of NOT holding stock
Table 18: Costs associated with holding and not holding stock Revision
on the go
Having the right quantity of stock for efficient operations is a balance between excessive
stock and insufficient stock.
Over to you
Activity 10: Stock Level
Explain how each of the following will affect an organisation’s required level of stock.
1 Changing from a supplier in a different city to a local supplier
2 An increase in the rate of interest
3 Stopping production of one of the two products the company manufactures
4 Recent fluctuations in demand of one of the two products
148 © ABE
Logistics Management Chapter 4
There are costs and risks associated with holding stock and with NOT
holding enough stock. Revision
on the go
© ABE 149
Chapter 4 Logistics Management
The demand for stock can be predicted with accuracy. It is constant and evenly spread over
the period. It does not fluctuate due to seasonality or other reasons.
Stock is replenished just at the point that the business runs out of stock.
The EOQ model is based on two key categories of costs associated with stock management
(refer to Table 21).
Holding or carrying These include cost of storage space, cost of insurance, interest
costs on capital tied up in stock, loss from deterioration, theft and
obsolescence.
According to Atrill and McLaney (2007), managers strive to keep stock levels at a minimum
because of the high costs associated with holding stock. However, there are ramifications of doing
this. Reducing the holding cost will lead to an increase in ordering costs, creating a dilemma, as
managers will need to decide between minimising holding costs and minimising ordering costs.
The EOQ model can help to balance these costs because it calculates the optimum size of the
purchase order by taking into account the holding and ordering costs. The EOQ is the purchase
order quantity that minimises total order cost plus holding cost. It is the order quantity for a stock
item that will minimise the combined cost of stock ordering and stock holding over a given period
of time. This is shown in Figure 12.
150 © ABE
Logistics Management Chapter 4
Annual cost
Total cost
Ordering costs
2DC
EOQ =
H
Where:
D = annual demand expressed in units
C = cost of placing an order
H = annual holding cost per unit
The EOQ model is not directly influenced by the price paid to the supplier, as it does not take into
account the purchase price or the buying cost of the item. Instead, it focuses on the administrative
costs of placing each order and the costs of holding the stock. However, the purchase price may
have an indirect effect on the economic order size that the model calculates when the items are
relatively expensive. The model also assumes that there is no discount for bulk quantities, however
organisations often benefit from bulk purchasing economies. Buying in bulk may decrease the annual
purchase price and ordering cost, but may increase the holding costs (Atrill and McLaney, 2007).
Over to you
Activity 11: Volume decision – Economic Order Quantity (EOQ)
Gareth is a retailer who sells Product X that he buys from LM Company. Every year he
buys 36,750 units of Product X at a cost of $12 each. He can obtain fresh supplies of stock
instantaneously but the cost of placing an order is $200. The annual cost of holding one
unit is $1.20.
1 Calculate the EOQ.
2 Calculate the total annual cost of stock.
© ABE 151
Chapter 4 Logistics Management
Over to you
Activity 12: Volume decision with discount
LM Company decides to offer Gareth a 2% discount on orders of 5000 units or more and
a 2.5% discount on orders of 7500 units or more.
Calculate the new EOQ.
152 © ABE
Logistics Management Chapter 4
The re-order point, in reality, is “the point at which stock will fall to zero minus the order lead time”
(Slack, Chambers and Johnston, 2010). It can also be described in terms of the re-order level: the
level at which a new order is placed with a supplier. When the stock level reaches the re-order level,
a new order for supplies needs to be triggered. The difference between the time of re-order and
delivery should not be more than the lead-time. This is shown in Figure 13.
Re-order level
The diagram above is based on the assumption that demand and lead times are predictable. This is
again purely theoretical, so to avoid the risk of stock-out, supplies need to be re-ordered earlier than
this purely theoretical model would indicate. This will ensure that there is buffer or safety stock to
prevent stock-out if there is a delay in receiving supplies or an increase in demand. The level of buffer
and safety stock needs to be determined methodically (this is outside the scope of the syllabus).
The replenishment approach shown here is also known as the “continuous review approach”, as it
involves continual reviews of the stock level of each item (Slack, Chambers and Johnston, 2010).
A continuous review approach will result in the organisation placing same size orders (possibly
determined using the EOQ model) in a non-uniform manner, which is time-consuming.
The other approach is a “periodic review approach”. The orders for fresh supplies are made at
regular fixed times rather than at the re-order level. The time interval between two orders can also
be determined on the basis of the EOQ model (Slack, Chambers and Johnston, 2010).
EOQ
T= × 12
D
© ABE 153
Chapter 4 Logistics Management
Where:
T = optimum time interval
EOQ = Economic Order Quantity
D = annual demand
Over to you
Activity 13: Timing decision
Gareth decides that the order size will be the Economic Order Quantity (EOQ) every time
he places the order with LM Supplies. It takes two weeks for an order to be delivered.
How frequently will Gareth place an order with LM Supplies?
Over to you
Activity 14: Re-order point
1 T
he lead-time for Gareth’s orders is four weeks and the demand of Product X is steady
throughout the year. At what quantity of Product X should Gareth re-order?
2 How much stock should Gareth have on hand when he places the order?
3 A
t what level should Gareth re-order if he decides to maintain a safety stock of 500
units?
154 © ABE
Logistics Management Chapter 4
Usage value has a direct relationship with monitoring and control, as shown in Figure 14.
Low
High monitoring
and control
Usage value
Low monitoring
and control
High
Class A These include high-usage value items. Around 20% of high-usage value
items account for 80% of the total usage value.
Class B These include medium-usage value items. Generally 30% of Class B items
account for 10% of the total usage value.
Class C These include low-usage value items. Generally 50% of Class C items
account for 10% of the total usage value.
© ABE 155
Chapter 4 Logistics Management
In addition to considering annual usage and value to classify stock items, there are three other
factors that may be considered (Slack, Chambers and Johnston, 2010). These are listed in
Table 23.
Stock-out risk Items that have the potential to cause failure in production
or in meeting market requirements need closer monitoring.
Table 23: Other factors in classifying stock using ABC analysis Revision
on the go
Classification of stock items highlights stock items that have high-usage value since
they constitute 80% of the value of the total stock. Other factors that determine
classification are: stock-out risk, uncertainty of supply and risk of obsolescence. Revision
on the go
Just-in-time
Just-in-time (JIT) originated in Japan, and is often viewed as a radical approach to stock management
as it eliminates the need to hold any stock.
156 © ABE
Logistics Management Chapter 4
JIT is not just a strategy to achieve maximum cost efficiency but also a philosophy that requires a
cultural shift in most organisations. JIT is designed to deliver supplies straight from the supplier
to the organisation “just-in-time” for the production process or for sale. This transfers the cost of
holding the stock from the manufacturer or retailer to the supplier.
Although this minimises the cost of stock and eliminates waste, it increases the risk for the focal
organisation because the organisation becomes more dependent on the supplier for its smooth
operations. JIT is based on the premise that the supplier will always deliver good quality stock
on time, and that the organisation that adopts JIT will operate smoothly (no breakdowns for
manufacturing organisations). Any delay or problems at the supplier’s end can cause major
disruption for the organisation. It also assumes that the queuing and storage time for stock is
eliminated and only the time spent in processing supplies is seen to add value. These are almost
unrealistic assumptions.
JIT is a partnership-centric approach to supply chain management, in which both the focal
organisation and the supplier are two cogs in the economic wheel, with production lines and
planning processes completely synchronised. However, there is a supplier-related risk that must
be managed.
Although the organisation that has adopted JIT can save on the cost of stock holding, there may
be other costs associated with JIT. For example, the supplier who bears the holding cost may
increase the price of stock to recover this cost. In addition, the focal organisation is contractually
tied to the supplier and therefore may not be able to take advantage of lower prices offered by
another supplier.
Slack, Chambers and Johnston (2010) point to the advantages and disadvantages of JIT, listed in
Table 24.
Advantages Disadvantages
© ABE 157
Chapter 4 Logistics Management
Advantages Disadvantages
• Because the key JIT objective is to get • Disruption in one stage affects the whole
inventory of the right quantity at the process and therefore leads to lower
right time at the right place, unnecessary capacity utilisation.
inbound logistics is reduced, which
results in reduced costs of transportation • Increases supply chain risk at the cost of
and warehousing. achieving efficiency.
The focal organisation needs to turn over or convert its stock into sales as quickly as possible because
slow-moving stock depletes its return on investment. In general terms, the number of times the
organisation is able to turn over or convert its stock into sales is known as stock turnover.
188 Atkinson, A.A.; Kaplan, R.S. and Young, M.S. (2004), Management Accounting, p. 568: Pearson/Prentice Hall
158 © ABE
Logistics Management Chapter 4
This indicates the number of times the stock This is based on average stock and cost of
is converted into sales. It is calculated as: sales. It is calculated as:
cost of sales 365
Rate of stock turnover = Stock turnover period =
average stock rate of stock turnover
Where,
OR
opening stock + closing stock average stock
average stock = = × 365
2 cost of sales
In highly seasonal businesses, average stock Stock turnover period indicates the
may be calculated as a monthly average average period for which stock is held by
because stock levels vary considerably over the organisation. The shorter the turnover
the year. period of stock, the better it is for the
organisation.
When the stock levels do not vary from
month to month, stock turnover may be
measured as:
cost of sales
Rate of stock turnover =
year end stock
Significance: The rate of stock turnover Significance: This is a useful measure for
measures an organisation’s efficiency in making comparisons with other businesses.
managing its stock. The higher the rate It is possible to calculate the average
of stock turnover, the more efficient the inventory turnover period for individual
organisation is at managing its stock. By stock types as well as for overall stock.
monitoring the rate at which stock turns over,
the organisation is able to control its stock.
Rate of stock turnover and stock turnover period are illustrated in an extract from Walmart’s Annual
Reports 2016, shown in Figures 15 (a) and (b).
© ABE 159
Chapter 4 Logistics Management
160 © ABE
Logistics Management Chapter 4
Table 26 shows the calculation of rate of stock turnover and stock turnover period for Walmart for
three years along with the analysis.
360,984
Rate of stock turnover = = 8.05 times
44,805
365
Stock turnover period = = 45.34 days
8.05
365,086
Rate of stock turnover = = 8.11 times
45,000
365
Stock turnover period = = 45 days
8.11
358,069
Rate of stock turnover = = 8.08 times
44,330.5
365
Stock turnover period = = 45.2 days
8.08
Table 26: Analysis of Walmart’s rate of stock turnover and stock turnover period Revision
on the go
Analysis
It can be seen that the average rate at which the stock turns over into sales is a little over 8.
In 2016, there was a slight decline in the organisation’s efficiency in managing its stock, compared
to 2015.
The average time taken for stock to turn over or get converted into sales is 45 days. This has gone
up over the last year, indicating that it took slightly longer to convert stock to sales in 2016 than it
did in 2015.
Comparing the stock turnover period of different organisations can be a way to analyse the focal
organisation’s efficiency in managing stock.
© ABE 161
Chapter 4 Logistics Management
Over to you
Activity 15: Stock turnover
Select one of the four companies you used in Activity 9. Download the annual report of
another year.
1 Calculate the following for the chosen company:
• rate of stock turnover;
• stock turnover period.
2 Write a brief analysis of the efficiency of the company stock management.
3 C
ompare this efficiency with Walmart’s stock management efficiency (as shown in the
examples on the previous pages).
READING LIST
• Atkinson, A.A., Kaplan, R.S. and Young, M.S. (2004), Management Accounting, Pearson/
Prentice Hall
• Atrill, P. and McLaney, E. (2007), Management Accounting for Decision Makers, 5th Ed., FT/
Prentice Hall
• Coyle, J., Novack, R. and Gibson, B. (2015), Transportation: A Global Supply Chain
Perspective, 8th Ed., Southwestern College Publication
• Ross, D.F. (2015), Distribution Planning and Control: Managing in the Era of Supply Chain
Management, 3rd Ed., Springer
• Rushton, A., Croucher, P. and Baker, P. (2017), The Handbook of Logistics and Distribution
Management, 6th Ed., Kogan Page
• Slack, N., Brandon-Jones, A. and Johnston, R. (2013), Operations Management, 7th Ed.,
Pearson
162 © ABE
Logistics Management Chapter 4
Summary
• Logistics management is the “part of supply chain management that plans, implements, and
controls the efficient, effective forward and reverse flow and storage of goods, services and
related information between the point of origin and the point of consumption in order to meet
customers’ requirements.”
• “Logistics is the process of strategically managing the procurement, movement and storage
of materials, parts and finished inventory (and the related information flows) through the
organisation and its marketing channels in such a way that current and future profitability are
maximised through the cost-effective fulfilment of orders.”
• Logistics activities include: inbound and outbound transportation management, fleet
management, warehouse management and order management.
• Some other important logistics activities are logistics network design, supply-demand
forecasting and third-party logistics service management.
• Co-ordination between logistics and other organisational functions is essential for smooth
operations.
• Parameters for evaluating logistics performance include: logistics costs, efficiency in inventory
management, availability of product in the market, delivery (time and quantity).
• The three reasons for treating logistics as a critical component of the supply network strategy
are competition, costs and internationalisation.
• The total logistics costs are the sum of:
• inbound and outbound transportation costs;
• facilities costs that include warehousing, distribution centres, and handling equipment;
• inventory costs;
• material handling costs;
• packaging costs;
• administration costs for order processing and invoicing;
• managerial costs.
• Logistics strategy is the link between corporate strategy, production and distribution.
• Two physical facilities that are used to execute logistics strategy are transportation and
warehousing.
• Transportation accomplishes two important physical tasks in the logistics pipeline: movement of
material and products, and storage of material and products.
• Transportation links the components of a supply chain’s complex functional structure and an
extensive global structure, and so becomes the most important accessory of the marketing mix.
• In current logistics systems:
• international logistics pipelines require intermodal transportation;
• each mode has a unique economical and technical structure;
• each mode has a unique quality of link service;
• third-party transportation service providers serve the focal organisation with multiple
capabilities.
• There are three principles that govern transportation planning: economies of scale, economies
of distance and cost of velocity.
© ABE 163
Chapter 4 Logistics Management
• Transportation failure causes a delay in deliveries, leads to loss by damage or theft in transit,
and, as a result, ends in quantitative and qualitative loss for the organisation.
• Key properties of warehousing are: high capital investment and the magnitude of the physical
assets.
• Logistic postponement refers to delaying product-related processes in order to achieve a
competitive advantage through mass customisation in a cost-effective way in order to meet
customers’ requirements.
• There are three types of warehouses: private warehouses, contract warehouses and public
warehouses.
• Warehousing performs four key functions: stockpiling, stock mixing, trans-loading or cross-
docking, and contingency protection.
• Two warehousing strategies are: industry synergies and total system costs.
• Key areas of warehouse operational management include management of manpower and
equipment, and storage space utilisation.
• Storage space use is a measure of warehouse productivity.
• Forecasting is a planning tool carried out by extrapolating either historic data or management’s
assumptions.
• There are two broad approaches to forecasting: qualitative approach and quantitative approach.
• Methods used in a qualitative approach include panel approach, Delphi method and scenario
planning.
• Methods used in a quantitative approach include time series method and causal modelling.
• Demand management can lead to considerable supply chain savings. Two key approaches for
demand management are level capacity plan approach and chase demand plan approach.
• There are three types of stock in a manufacturing organisation: raw material, work in progress
and finished goods.
• Stock can also be classified as buffer stock, cycle stock, pipeline stock, anticipation stock and
decoupling stock.
• There are costs and risks associated with holding stock, and with not holding enough stock, so
it is important to strike a balance between the two.
• Operations managers need to make three important decisions related to stock at any point of
time: volume decision, timing decision and control decision.
• The Economic Order Quantity (EOQ) model is a popular tool for making a volume decision. It
is based on two key categories of costs associated with stock management: holding cost and
ordering cost.
• The re-order point for stock is the point at which stock will fall to zero minus the order lead-time.
• A continuous review approach will result in the organisation placing same size orders in a non-
uniform manner.
• The ABC system of stock control targets different levels of control for different items of stock
held. It categorises stock into three classes: Class A (high-usage value items), Class B (medium-
usage value items) and Class C (low-usage value items).
• JIT is often viewed as a radical approach to stock management, as it eliminates the need to hold
any stock.
• Just-in-time (JIT) is a partnership-centric approach to supply chain management, where both the
focal organisation and the supplier are two cogs in the economic wheel, with production lines
and planning processes completely synchronised.
164 © ABE
Logistics Management Chapter 4
• The focal organisation needs to turn over or convert its stock into sales as quickly as possible as
slow-moving stock depletes the organisation’s return on investment.
• Stock turnover, also known as inventory turnover “is a measure of management’s ability to
control its investment in inventory”.
• Stock turnover can be expressed in terms of rate of stock turnover and stock turnover period.
• Rate of stock turnover indicates the number of times stock is converted into sales.
• Stock turnover period indicates the average period the organisation holds stock for. The shorter
the turnover period of stock, the better it is for the organisation.
© ABE 165
Glossary
Glossary
achieve a certain percentage of market share in
Arbitrage opportunity The opportunity
one year.
used by the focal firm to get access to raw
materials, finished goods and workforce at Corporate social responsibility The
relatively less cost than in their own country. positive behaviour expected from organisations
in their end-to-end transactions. For example,
Automation Large-scale use of machines
making sure that material used in production
in operations. This often results in higher
does not harm the environment, and supporting
productivity and greater efficiency in the long
cause-driven non-governmental organisations
run, but also leads to de-skilling of workforce
(NGOs) that work for community welfare.
and unemployment.
Corporate strategy The natural or
Business strategy The organisation’s
deliberate route that the organisation takes
strategy to compete against its rivals in
to grow and/or exhibit superior performance.
either multiple market segments or a niche
Corporate strategy becomes visible when the
segment. The generic business strategy of
organisation takes actions such as launching a
the organisation is built on cost leadership
new product, expanding into a new market (e.g.
(efficiency-driven), or differentiation (driven by
international markets), buys a rival firm, buys
core competence and capabilities), or a mix of
a supplier, bypasses intermediaries to connect
cost leadership and differentiation.
directly with customers, makes investment into
Also called competitive strategy.
a completely new business, and withdraws from
Capabilities The unique arrangement of an existing, unprofitable business.
routine activities and processes in operations
Cost of poor quality Preventive, evaluative
that produces results superior to its rivals,
or remedial costs that are incurred because of
and therefore becomes a key source of
defects and shortfalls in products during pre-
competitive advantage. For example, a global
production, production and post-production
fast food chain’s ability to develop functional
stages.
co-ordination that results in consistent and
standardised quality of goods and services in its Cost leadership A business or competitive
facilities all over the world. strategy that allows the organisation to gain
competitive advantage as a result of superior
Capacity The inherent limit of one or more
cost efficiencies compared to competitors.
aspects of operations. For example, a short
When achieved, the cost leadership strategy
distance intercity airline can fly its aircraft only
allows the organisation to offer the most
for a limited number of flights each day.
competitive prices to its customers.
Competitive advantage The organisation’s
Customer loyalty Customer behaviour that
edge over its rivals. According to Michael
drives the customer to consistently make repeat
Porter, two key sources of competitive
purchases from the same supplier/retailer.
advantage are low costs and superior benefits.
Cyber attack The deliberate and malicious
Core competences The unique and non-
hacking of an organisation’s information
substitutable activities in the organisation’s
systems infrastructure by external agents with
operations that are its key source of
the aim of disrupting the firm’s operations.
competitive advantage. For example, the
airflow and air suction expertise of a company Differentiation A business or competitive
allows it to offer superior vacuum cleaners, strategy that allows the firm to gain a
hand dryers and fans. competitive advantage as a result of its superior
product/service. When achieved, differentiation
Corporate objectives The unambiguous,
allows the organisation to gain high margin
specific and time-driven goals that the
because of customers’ willingness to pay
organisation sets for itself. For example, to
premium price.
166 © ABE
Glossary
Distribution The activity that is performed to its products. For example, boycotting suppliers
get the finished goods to the market with the who exploit children.
purpose of making sales. Also called physical
distribution. Free on board (FOB) shipping point An
international commercial term that is a part
Dividends A part of the after-tax profit that of the buyer-seller agreement in international
the organisation distributes to its shareholders export and import activities. FOB refers to the
as a return on their investment. fact that once the seller has delivered the goods
to the buyer’s choice of transport vehicle at
Downstream The part of the supply chain the buyer’s chosen port of shipment, the legal
that links the focal organisation to its customers. title of the goods passes to the buyer. After
this stage is completed, the buyer is solely
E-business The focal organisation’s use of responsible for the delivery of goods, and any
the internet to perform some of the operations’ costs resulting from damage or loss.
activities.
Globalisation The liberal worldwide cross-
E-commerce The focal organisation’s use of border flow of goods, services, money and
the internet to sell goods and services directly workforces. For example, a Chinese firm sets up
to the customer. E-commerce has shrunk, and in a factory in Kenya and imports materials from
some cases eliminated, the intermediaries that Chile.
previously dominated the distribution function.
Global sourcing Obtaining supplies from
E-procurement The focal organisation’s use overseas suppliers in order to get the maximum
of the internet to purchase goods and services advantage of arbitrage opportunity. See
directly from suppliers. For repeat and frequent Arbitrage opportunity.
re-buys, e-procurement offers the advantage of
long-term cost efficiencies. Goods Tangible items that are bought by an
organisation for production (raw material) or
Effective A description of activities that distribution (finished goods), and subsequently
achieve stated objectives. bought by customer for consumption.
Also called products.
Efficient A description of activities and
processes that use minimum resources, and Green reporting An emerging area of
therefore result in minimum wastage, to achieve financial accounting that expects organisations
stated objectives. to report on aspects of their operations that
have a direct impact on the environment.
Electronic data interchange The For example, the specific quantity of CO2
dedicated computer-to-computer exchange of
(greenhouse gases) emission resulting from
information between the focal organisation and
transportation.
its key suppliers in order to build a responsive
Also called sustainability reporting or
and agile supply chain.
environmental reporting.
Emergent strategy The strategy that Inventory An organisation’s raw material,
comes into play because of sudden market
work-in-progress goods, and finished goods.
development, rather than deliberate planning.
Also called stock.
For example, in response to a growing concern
about women’s safety, a taxi company launches Just-in-time (JIT) A system of stock control
a fleet of cabs that has women drivers and that originated in Japan, based on the premise
serves only women, and with this action, takes that the focal organisation can achieve significant
a large share of the women travellers from its cost savings if it adopts the partnership approach
rivals. in its supplier relationships in order to get a
reliable and accurate supply of material at the
Ethical supply chain A supply chain right time and right place. JIT eliminates costs
that adopts non-exploitative social and
associated with holding stock, and puts emphasis
environmental practices to source and deliver
on quality.
© ABE 167
Glossary
Tendering The process of inviting tenders. Vertical integration This is the integration
of companies at different stages of production,
Tender A bid submitted by a supplier or such as a manufacturer owning the delivery
potential supplier in response to the focal service provider or the suppliers.
organisation’s invitation. A tender is successful
when the organisation chooses it over other
tenders because of the quoted price and other
terms of business.
© ABE 169