Catálogo TEXSA Completo PDF
Catálogo TEXSA Completo PDF
Thermal insulation
Acoustic insulation
Geotextiles
Drainages
TEXSA, S.A. Auxiliary products
C/ Ferro,7- Polígono Can Pelegrí
08755 Castellbisbal (Barcelona) Spain
Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 88
E-mail: [email protected]
Customer Service Tel. (+34) 93 635 14 10
w ww. t e x s a . c o m
Page
Index
Texsa profile 4
Roofing and waterproofing, thermal and acoustic insulation systems
Roofing, flat root 6
Roofing, metal deck 7
Roofing, pitched roof 8
Tanking and wet areas 8
Acoustic insulation 10
Civil engineering 12
Waterproofing - Products
APP Bituminous membranes 14
SBS Bituminous membranes 16
Self-adhesives membranes 18
Special application membranes 19
Bands for adhesion, reinforcement and joints 20
Bituminous shingles and corrugated sheets 21
PVC Synthetic membranes: Vinitex 22
TPO Synthetic membranes: Texsalon 23
Liquid waterproofing 24
Waterproofing paints 25
Primer, emulsions, adhesives and mastics 25
Geotextiles 30
Drainages 31
Auxiliary products
Bitumen waterproofing 32
PVC 34
TPO 35
Page
Index
Texsa profile 4
Roofing and waterproofing, thermal and acoustic insulation systems
Roofing, flat root 6
Roofing, metal deck 7
Roofing, pitched roof 8
Tanking and wet areas 8
Acoustic insulation 10
Civil engineering 12
Waterproofing - Products
APP Bituminous membranes 14
SBS Bituminous membranes 16
Self-adhesives membranes 18
Special application membranes 19
Bands for adhesion, reinforcement and joints 20
Bituminous shingles and corrugated sheets 21
PVC Synthetic membranes: Vinitex 22
TPO Synthetic membranes: Texsalon 23
Liquid waterproofing 24
Waterproofing paints 25
Primer, emulsions, adhesives and mastics 25
Geotextiles 30
Drainages 31
Auxiliary products
Bitumen waterproofing 32
PVC 34
TPO 35
TEXSA S.A. is a Spanish company, founded in 1954, TEXSA has production sites in Castellbisbal Architects, engineers, applicators and distributors
that manufactures and markets products for roofing (Barcelona), Cervera (Lleida), Altamira (Mexico), from all over the world have collaborated closely
/ waterproofing, thermal and acoustic insulation and Correggio (Italy) and soon will also have factories with TEXSA to obtain new products and systems
geotextiles, as well as the corresponding auxiliary in Jaipur (India) and Alpiarça (Portugal) capable of overcoming the architectural challenges
materials for each of these fields, for building and of the 21st century.
civil works. But TEXSA is more than this; its history is closely
linked to the building sector with important Many renowned architects have relied on TEXSA
Its products are sold in over 35 countries, 11 of contributions, in the way of advances that have products for their projects: Ricardo Bofill, Jean
which operates through subsidiaries and the rest acquired worldwide recognition. Nouvel, Oscar Nienmeyer, Richard Rogers, Fermín
through local distributors. Vázquez, Alonso Balaguer, Herzog & Mouron ...
Agbar Tower El Prat International Airport (T1) Gas Natural Headquarters RCD Espanyol Stadium Caja Madrid Tower Cristal Tower Sacyr Vallehermoso Tower Space Tower
Jean Nouvel Ricardo Bofill Miralles - Benedetta Tagliabue Marck Fenwick Norman Foster César Pelli Carlos Rubio Carvajal y Henry N. Cobb
Enrique Álvarez-Sala Walter
Porto Subway Fira Barcelona Tower
Souto de Moura Toyo Ito
4 5
TEXSA S.A. is a Spanish company, founded in 1954, TEXSA has production sites in Castellbisbal Architects, engineers, applicators and distributors
that manufactures and markets products for roofing (Barcelona), Cervera (Lleida), Altamira (Mexico), from all over the world have collaborated closely
/ waterproofing, thermal and acoustic insulation and Correggio (Italy) and soon will also have factories with TEXSA to obtain new products and systems
geotextiles, as well as the corresponding auxiliary in Jaipur (India) and Alpiarça (Portugal) capable of overcoming the architectural challenges
materials for each of these fields, for building and of the 21st century.
civil works. But TEXSA is more than this; its history is closely
linked to the building sector with important Many renowned architects have relied on TEXSA
Its products are sold in over 35 countries, 11 of contributions, in the way of advances that have products for their projects: Ricardo Bofill, Jean
which operates through subsidiaries and the rest acquired worldwide recognition. Nouvel, Oscar Nienmeyer, Richard Rogers, Fermín
through local distributors. Vázquez, Alonso Balaguer, Herzog & Mouron ...
Agbar Tower El Prat International Airport (T1) Gas Natural Headquarters RCD Espanyol Stadium Caja Madrid Tower Cristal Tower Sacyr Vallehermoso Tower Space Tower
Jean Nouvel Ricardo Bofill Miralles - Benedetta Tagliabue Marck Fenwick Norman Foster César Pelli Carlos Rubio Carvajal y Henry N. Cobb
Enrique Álvarez-Sala Walter
Porto Subway Fira Barcelona Tower
Souto de Moura Toyo Ito
4 5
Roofing Roofing
flat roof metal deck 6
5
1
2
3 7
1 Trafficable inverted roof (with bitumen membrane) 3 Extensive green roof (with bitumen membrane) 5 Warm roof fully bonded 7 Metal deck (with bitumen membrane)
8 4 5
7
4
4 3
3 3
6 2
5 2
2 4
1
1
1 2
3 1 DITE
1. Support. 1. Support. 5. ROOFTEX 150. 1. Support. 3. MORTERPLAS FV. 1. Profiled metal deck. 4. MORTERPLAS SBS FM 3 Kg.
2. SUPER MORTERPLAS PE 4.8 Kg. 2. EMUFAL I. 6. ROOFMATE SL. 2. AISLADECK BV. 4. MORTERPLAS FPV MIN. 2. AISLADECK AL. 5. MORTERPLAS FPV 4 Kg. MIN.
3. ROOFTEX 300. 3. MORTERPLAS FV 3 Kg. 7. DRENTEX IMPACT GARDEN. 3. Fixings.
4. TEXLOSA R. 4. MORTERPLAS FP 4 Kg. GARDEN. 8. Soil finish.
2 Trafficable inverted roof (with synthetic membrane) 4 Extensive green roof (with synthetic membrane) 6 Warm roof fully bonded (with synthetic FleeceBack membrane) 8 Metal deck (with synthetic membrane)
7 4
4
5 3
3
6
3
5
4 2 2
4
3
3 2 2 1
1 1
1 DITE
1. Support. 4. ROOFTEX 300. 1. Support. 5. ROOFMATE SL. 1. Support. 3. VINITEX adhesive FB. 1. Profiled metal deck. 3. Fixings.
2. ROOFTEX. 5. TEXLOSA R. 2. ROOFTEX 300. 6. DRENTEX IMPACT GARDEN. 2. AISLADECK VV. 4. VINITEX MAT-FB. 2. AISLADECK AL. 4. VINITEX MP or TEXSALON MP.
3. VINITEX MAT or TEXSALON MAT. 3. VINITEX MAT or TEXSALON MAT. 7. Soil finish.
4. ROOFTEX 150.
6 7
Roofing Roofing
flat roof metal deck 6
5
1
2
3 7
1 Trafficable inverted roof (with bitumen membrane) 3 Extensive green roof (with bitumen membrane) 5 Warm roof fully bonded 7 Metal deck (with bitumen membrane)
8 4 5
7
4
4 3
3 3
6 2
5 2
2 4
1
1
1 2
3 1 DITE
1. Support. 1. Support. 5. ROOFTEX 150. 1. Support. 3. MORTERPLAS FV. 1. Profiled metal deck. 4. MORTERPLAS SBS FM 3 Kg.
2. SUPER MORTERPLAS PE 4.8 Kg. 2. EMUFAL I. 6. ROOFMATE SL. 2. AISLADECK BV. 4. MORTERPLAS FPV MIN. 2. AISLADECK AL. 5. MORTERPLAS FPV 4 Kg. MIN.
3. ROOFTEX 300. 3. MORTERPLAS FV 3 Kg. 7. DRENTEX IMPACT GARDEN. 3. Fixings.
4. TEXLOSA R. 4. MORTERPLAS FP 4 Kg. GARDEN. 8. Soil finish.
2 Trafficable inverted roof (with synthetic membrane) 4 Extensive green roof (with synthetic membrane) 6 Warm roof fully bonded (with synthetic FleeceBack membrane) 8 Metal deck (with synthetic membrane)
7 4
4
5 3
3
6
3
5
4 2 2
4
3
3 2 2 1
1 1
1 DITE
1. Support. 4. ROOFTEX 300. 1. Support. 5. ROOFMATE SL. 1. Support. 3. VINITEX adhesive FB. 1. Profiled metal deck. 3. Fixings.
2. ROOFTEX. 5. TEXLOSA R. 2. ROOFTEX 300. 6. DRENTEX IMPACT GARDEN. 2. AISLADECK VV. 4. VINITEX MAT-FB. 2. AISLADECK AL. 4. VINITEX MP or TEXSALON MP.
3. VINITEX MAT or TEXSALON MAT. 3. VINITEX MAT or TEXSALON MAT. 7. Soil finish.
4. ROOFTEX 150.
6 7
Roofing Tanking
pitched roof and wet areas
7 External walls, capillarity
1
3 7
2 5 2
6
4
8 1
9 2 3
1. Wall. 3. EMUFAL N.
2. Mortar. 4. TEXSELF 1.5 BAND.
1 Pitched roof 3 Balconies 5 External tanking, high humidity 8 Floors, medium/high humidity
7
6
6
5
3 5
4
4
2 4 3 3 4
1 5
2 1
1 3
2
2
1
1. Plywood. 5. TEXSELF BAND FV 2C. 1. Support. 3. TEXSELF HD. 1. Wall. 4. DRENTEX IMPACT 100. 1. Soil. 4. PLASFAL FV 3 Kg.
2. TEXSELF 1.5 mm. 6. Batten. 2. EMUFAL I. 4. Ceramic tiles. 2. EMUFAL I. 5. Soil. 2. Gravel. 5. MORTERPLAS PARKING.
3. AISLADECK AL. 7. Tiles. 3. TEXSELF 1.5 mm. 3. Geoland 700. 6. Concrete slab.
4. Fixings.
2 Pitched roof with acoustic insulation 4 Bath 6 Foundations, underground structures 9 Car parks
6
7
5
6 5
3
4 5 8
4
4 4 3 1
2
1 3
2
1 2
2 3 1
7
1. Plywood. 5. Plywood. 1. Support. 3. TEXSELF HD. 1. Retaining wall. 5. Injection tube and pipe. 1. Concrete slab. 4. MORTERPLAS PARKING.
2. TECSOUND® FT. 6. TEXSELF 1.5 mm. 2. EMUFAL I 4. Ceramic tiles. 2. Geotextil Rooftex 500. 6. Concrete wall. 2. EMUFAL I Primer. 5. Mastic asphalt.
3. AISLADECK AL. 7. Shingle finishing. 3. Vinitex SL. 7. Blinding concrete. 3. MORTERPLAS SBS FV 3 Kg.
4. Batten. 4. Waterstop strip Vinitex. 8. Foundation slab.
8 9
Roofing Tanking
pitched roof and wet areas
7 External walls, capillarity
1
3 7
2 5 2
6
4
8 1
9 2 3
1. Wall. 3. EMUFAL N.
2. Mortar. 4. TEXSELF 1.5 BAND.
1 Pitched roof 3 Balconies 5 External tanking, high humidity 8 Floors, medium/high humidity
7
6
6
5
3 5
4
4
2 4 3 3 4
1 5
2 1
1 3
2
2
1
1. Plywood. 5. TEXSELF BAND FV 2C. 1. Support. 3. TEXSELF HD. 1. Wall. 4. DRENTEX IMPACT 100. 1. Soil. 4. PLASFAL FV 3 Kg.
2. TEXSELF 1.5 mm. 6. Batten. 2. EMUFAL I. 4. Ceramic tiles. 2. EMUFAL I. 5. Soil. 2. Gravel. 5. MORTERPLAS PARKING.
3. AISLADECK AL. 7. Tiles. 3. TEXSELF 1.5 mm. 3. Geoland 700. 6. Concrete slab.
4. Fixings.
2 Pitched roof with acoustic insulation 4 Bath 6 Foundations, underground structures 9 Car parks
6
7
5
6 5
3
4 5 8
4
4 4 3 1
2
1 3
2
1 2
2 3 1
7
1. Plywood. 5. Plywood. 1. Support. 3. TEXSELF HD. 1. Retaining wall. 5. Injection tube and pipe. 1. Concrete slab. 4. MORTERPLAS PARKING.
2. TECSOUND® FT. 6. TEXSELF 1.5 mm. 2. EMUFAL I 4. Ceramic tiles. 2. Geotextil Rooftex 500. 6. Concrete wall. 2. EMUFAL I Primer. 5. Mastic asphalt.
3. AISLADECK AL. 7. Shingle finishing. 3. Vinitex SL. 7. Blinding concrete. 3. MORTERPLAS SBS FV 3 Kg.
4. Batten. 4. Waterstop strip Vinitex. 8. Foundation slab.
8 9
8
7
Acoustic insulation
2 5
3
1
1 Partitions with gypsum plasterboard 3 Partition walls 5 Ducting and drainage pipes 7 Metal deck
Thickness: 102 mm Thickness: 230 mm 2 RW 25 dB RW 38 dB
RW 51 dB RW 59 dB
3 6
6 6
1 1 1
4 1 5 5
2
3 1 4
1
3 3
5
6 4 2
4 7 1
2 7 8
8 10 9
1. Gypsum plasterboard 13 mm. 5. Ceramic tiles. 1. Plastering. 6. Gypsum plasterboard 13 mm. 1. TECSOUND® FT 55 AL. 3. Plastic flange. 1. Profiled metal deck (th: 0.7 mm). 4. Fixings.
2. TECSOUND® S BAND 50. 6. Reinforced mortar screed. 2. Brick wall (th: 13 cm). 7. Tile. 2. Drainpipe. 4. Aluminium tape. 2. TECSOUND® 100. 5. MORTERPLAS FV 3 Kg.
3. TECSOUND® SY 70. 7. TEXSILEN PLUS 5 mm. 3. TECSOUND® 2FT 80. 8. Reinforced mortar screed. 3. AISLADECK BV. 6. MORTERPLAS SBS FPV Mineral 4.8 kg.
4. Mineral wool (th: 50 mm; d: 15 kg/m3). 8. Concrete floor. 4. TECSOUND® S BAND 50. 9. TEXSILEN PLUS.
5. Mineral wool (th: 50 mm; d: 15 Kg/m3). 10.Concrete floor.
2 Partitions with gypsum plasterboard 4 Façades / Fronts and Ceilings 6 Floors 8 Standing seam roof
1 2
4 Thickness: 155 mm 7 Thickness: 244 mm Thickness: 21.5 mm RW 55 dB
3 RW 60 dB 3 RW Ceiling 56 dB (with parquet of 15 mm)
RW Façade 55 dB 4
ΔLW 16 dB
LnW 62 dB 5
1
4 10
5 4
1 5
8
6 3
8
3
8 2
6 11 8
9 2
7 6
2 8 1 1
2 9
1. 2 layers of 13 mm gypsum plasterboard. 6. Ceramic tiles. 1. Support. 7. TECSOUND® S BAND 50. 1. Concrete floor. 3. TECSOUND® 70. 1. Profiled metal deck (th: 0.7 mm). 4. Mineral wool (30 Kg/m3).
2. TECSOUND® S BAND 50. 7. Reinforced mortar. 2. Plastering. 8. Gypsum plasterboard 13 mm. 2. TEXSILEN 3 mm. 4. Timber floor. 2. TECSOUND® 100. 5. Aluminium standing seam.
3. TECSOUND® SY 50. 8. TEXSILEN PLUS 5 mm. 3. TECSOUND® FT 75. 9. Brick wall (e: 13 cm). 3. Mineral wool (th: 100 mm;
4. Gypsum plasterboard 13 mm. 9. Concrete floor. 4. Cavity (th: 200 mm). 10.Mineral wool (th: 50 mm; d: 70 Kg/m3). d: 150-220 Kg/m3).
5. Mineral wool (th: 40 mm; d: 30 Kg/m3). 5. Acoustic adjustable support. 11.Mineral wool (th: 50 mm; d: 40 Kg/m3).
6. TECSOUND® SY 70.
10 11
8
7
Acoustic insulation
2 5
3
1
1 Partitions with gypsum plasterboard 3 Partition walls 5 Ducting and drainage pipes 7 Metal deck
Thickness: 102 mm Thickness: 230 mm 2 RW 25 dB RW 38 dB
RW 51 dB RW 59 dB
3 6
6 6
1 1 1
4 1 5 5
2
3 1 4
1
3 3
5
6 4 2
4 7 1
2 7 8
8 10 9
1. Gypsum plasterboard 13 mm. 5. Ceramic tiles. 1. Plastering. 6. Gypsum plasterboard 13 mm. 1. TECSOUND® FT 55 AL. 3. Plastic flange. 1. Profiled metal deck (th: 0.7 mm). 4. Fixings.
2. TECSOUND® S BAND 50. 6. Reinforced mortar screed. 2. Brick wall (th: 13 cm). 7. Tile. 2. Drainpipe. 4. Aluminium tape. 2. TECSOUND® 100. 5. MORTERPLAS FV 3 Kg.
3. TECSOUND® SY 70. 7. TEXSILEN PLUS 5 mm. 3. TECSOUND® 2FT 80. 8. Reinforced mortar screed. 3. AISLADECK BV. 6. MORTERPLAS SBS FPV Mineral 4.8 kg.
4. Mineral wool (th: 50 mm; d: 15 kg/m3). 8. Concrete floor. 4. TECSOUND® S BAND 50. 9. TEXSILEN PLUS.
5. Mineral wool (th: 50 mm; d: 15 Kg/m3). 10.Concrete floor.
2 Partitions with gypsum plasterboard 4 Façades / Fronts and Ceilings 6 Floors 8 Standing seam roof
1 2
4 Thickness: 155 mm 7 Thickness: 244 mm Thickness: 21.5 mm RW 55 dB
3 RW 60 dB 3 RW Ceiling 56 dB (with parquet of 15 mm)
RW Façade 55 dB 4
ΔLW 16 dB
LnW 62 dB 5
1
4 10
5 4
1 5
8
6 3
8
3
8 2
6 11 8
9 2
7 6
2 8 1 1
2 9
1. 2 layers of 13 mm gypsum plasterboard. 6. Ceramic tiles. 1. Support. 7. TECSOUND® S BAND 50. 1. Concrete floor. 3. TECSOUND® 70. 1. Profiled metal deck (th: 0.7 mm). 4. Mineral wool (30 Kg/m3).
2. TECSOUND® S BAND 50. 7. Reinforced mortar. 2. Plastering. 8. Gypsum plasterboard 13 mm. 2. TEXSILEN 3 mm. 4. Timber floor. 2. TECSOUND® 100. 5. Aluminium standing seam.
3. TECSOUND® SY 50. 8. TEXSILEN PLUS 5 mm. 3. TECSOUND® FT 75. 9. Brick wall (e: 13 cm). 3. Mineral wool (th: 100 mm;
4. Gypsum plasterboard 13 mm. 9. Concrete floor. 4. Cavity (th: 200 mm). 10.Mineral wool (th: 50 mm; d: 70 Kg/m3). d: 150-220 Kg/m3).
5. Mineral wool (th: 40 mm; d: 30 Kg/m3). 5. Acoustic adjustable support. 11.Mineral wool (th: 50 mm; d: 40 Kg/m3).
6. TECSOUND® SY 70.
10 11
Civil engineering
5
4
4 3
3
5 1 2 6 2
3
5
4
2 1 4 3 1
1 2
2
1. External wall. 4. DRENTEX IMPACT 100. 1. Support. 4. MORTERPLAS SBS FP-T 6 Kg MIN. 1. Soil. 4. Gravel. 1. Soil. 4. VINITEX WS.
2. EMUFAL I Primer. 5. Soil. 2. EMUFAL I Primer. 5. Rail support. 2. Drainage pipe. 5. ROOFTEX drainage layer. 2. Drainage pipe. 5. Rocks.
3. TEXSELF 1.5 mm. 3. MORTERPLAS SBS FP 4.8 Kg. 3. ROOFTEX separating layer. 6. Rail support. 3. GEOLAND.
2
5
1 3 3 6
2 4
5 3 2
5 6
4 2
1 3
4 1
1
2
1. Rock. 4. PVC disc and fasteners. 1. Support. 3. MORTERPLAS FP 3 Kg. 1. Soil. 4. Gravel. 1. Soil. 4. Waterproofing membrane.
2. Shotcrete. 5. VINITEX SL or VINITEX TR. 2. EMUFAL I Primer. 4. MORTERPLAS SBS FP-T 6 Kg MIN. / 2. Drainage pipe. 5. ROOFTEX drainage layer. 2. Drainage pipe. 5. GEOLAND.
3. GEOLAND. 6. Inner concrete lining. MORTERPLAS PARKING. 3. ROOFTEX separating layer. 6. Mastic asphalt. 3. GEOLAND.
12 13
Civil engineering
5
4
4 3
3
5 1 2 6 2
3
5
4
2 1 4 3 1
1 2
2
1. External wall. 4. DRENTEX IMPACT 100. 1. Support. 4. MORTERPLAS SBS FP-T 6 Kg MIN. 1. Soil. 4. Gravel. 1. Soil. 4. VINITEX WS.
2. EMUFAL I Primer. 5. Soil. 2. EMUFAL I Primer. 5. Rail support. 2. Drainage pipe. 5. ROOFTEX drainage layer. 2. Drainage pipe. 5. Rocks.
3. TEXSELF 1.5 mm. 3. MORTERPLAS SBS FP 4.8 Kg. 3. ROOFTEX separating layer. 6. Rail support. 3. GEOLAND.
2
5
1 3 3 6
2 4
5 3 2
5 6
4 2
1 3
4 1
1
2
1. Rock. 4. PVC disc and fasteners. 1. Support. 3. MORTERPLAS FP 3 Kg. 1. Soil. 4. Gravel. 1. Soil. 4. Waterproofing membrane.
2. Shotcrete. 5. VINITEX SL or VINITEX TR. 2. EMUFAL I Primer. 4. MORTERPLAS SBS FP-T 6 Kg MIN. / 2. Drainage pipe. 5. ROOFTEX drainage layer. 2. Drainage pipe. 5. GEOLAND.
3. GEOLAND. 6. Inner concrete lining. MORTERPLAS PARKING. 3. ROOFTEX separating layer. 6. Mastic asphalt. 3. GEOLAND.
12 13
w a t e r p r o o f i n g
Weight 4,8 Kg/m2 0% slope flat roof - texlosa finish. Weight 6 Kg/m2 Bridge decks on railway structures,
4.8 Kg 6 Kg
Morterplas FP-T MIN. Roll 1 x 7 m motorways and roads. Flat roofs.
Roll 1.1 x 8 m 5 mm
4 mm APP modified-bitumen, Pallet 175 m2
waterproofing membrane Pallet 202.4 m2 Trafficable and non-trafficable flat roofs, warm
Hipermorterplas with double reinforcement and inverted roofs, single layer and multi-layer
of polyester felt and Weight 4 kg/m2 system. High tear and puncturing strength.
polyethylene. Morterplas FPV MIN. 5 Kg
4 Kg Roll 1.1 x 10 m
Moply FP MIN. 4 mm Mineral finished, APP modified
Pallet 253 m2 Weight 5 Kg/m2
bitumen waterproofing Non-trafficable flat and pitched roofs,
membrane with stabilised Roll 1 x 8 m in single layer system.
Weight 4.8 Kg/m2 polyester reinforcement. Pallet 200 m2
4.8 Kg 5 Kg
Roll 1.1 x 8 m Morterplas FPV-S MIN.
4 mm APP modified- bitumen, 4 mm
Pallet 202.4 m2
waterproofing membrane with
Supermorterplas double reinforcement of
coextruded polyethylene. Weight 4 Kg/m2
4 Kg Roll 1.1 x 10 m 0% slope flat roof - texlosa finish. Morterplas FPV MIN.
4 Kg
Pallet 253 m2 Moply FP MIN.
Trafficable and non-trafficable inverted flat roofs, Weight 4 Kg/m2 Non-trafficable flat and pitched roofs, in
Weight 4.8 Kg/m2 single layer and multi-layer system. Great multi-layer system as a finishing
4,8 Kg Roll 1 x 10 m
movement absorption capacity and easy membrane
Roll 1.1 x 8 m adaptable to the roof details. Mineral finished, APP modified- Pallet 250 m2
4 mm Pallet 202.4 m2 bitumen waterproofing
Morterplas FV MIN. 4 Kg membrane with fibre-glass
reinforcement.
APP modified- bitumen, Weight 4 Kg/m2
Morterplas PEc 4 Kg waterproofing membrane with Roll 1.1 x 10 m
coextruded polyethylene Pallet 253 m2
reinforcement.
4.8 Kg
Morterplas FP-S
4 mm Weight 4.8 Kg/m2
Roll 1 x 8 m
4.8 Kg Pallet 200 m2
Trafficable and non-trafficable flat roofs, warm
4 mm and inverted roofs, single layer and multi-layer
system. High tear and puncturing strength.
APP modified-bitumen
4 Kg Weight 4 Kg/m2
Morterplas FP waterproofing membrane with
polyester reinforcement. Roll 1 x 10 m
Moply FP 3 mm
Pallet 250 m2
14 15
w a t e r p r o o f i n g
Weight 4,8 Kg/m2 0% slope flat roof - texlosa finish. Weight 6 Kg/m2 Bridge decks on railway structures,
4.8 Kg 6 Kg
Morterplas FP-T MIN. Roll 1 x 7 m motorways and roads. Flat roofs.
Roll 1.1 x 8 m 5 mm
4 mm APP modified-bitumen, Pallet 175 m2
waterproofing membrane Pallet 202.4 m2 Trafficable and non-trafficable flat roofs, warm
Hipermorterplas with double reinforcement and inverted roofs, single layer and multi-layer
of polyester felt and Weight 4 kg/m2 system. High tear and puncturing strength.
polyethylene. Morterplas FPV MIN. 5 Kg
4 Kg Roll 1.1 x 10 m
Moply FP MIN. 4 mm Mineral finished, APP modified
Pallet 253 m2 Weight 5 Kg/m2
bitumen waterproofing Non-trafficable flat and pitched roofs,
membrane with stabilised Roll 1 x 8 m in single layer system.
Weight 4.8 Kg/m2 polyester reinforcement. Pallet 200 m2
4.8 Kg 5 Kg
Roll 1.1 x 8 m Morterplas FPV-S MIN.
4 mm APP modified- bitumen, 4 mm
Pallet 202.4 m2
waterproofing membrane with
Supermorterplas double reinforcement of
coextruded polyethylene. Weight 4 Kg/m2
4 Kg Roll 1.1 x 10 m 0% slope flat roof - texlosa finish. Morterplas FPV MIN.
4 Kg
Pallet 253 m2 Moply FP MIN.
Trafficable and non-trafficable inverted flat roofs, Weight 4 Kg/m2 Non-trafficable flat and pitched roofs, in
Weight 4.8 Kg/m2 single layer and multi-layer system. Great multi-layer system as a finishing
4,8 Kg Roll 1 x 10 m
movement absorption capacity and easy membrane
Roll 1.1 x 8 m adaptable to the roof details. Mineral finished, APP modified- Pallet 250 m2
4 mm Pallet 202.4 m2 bitumen waterproofing
Morterplas FV MIN. 4 Kg membrane with fibre-glass
reinforcement.
APP modified- bitumen, Weight 4 Kg/m2
Morterplas PEc 4 Kg waterproofing membrane with Roll 1.1 x 10 m
coextruded polyethylene Pallet 253 m2
reinforcement.
4.8 Kg
Morterplas FP-S
4 mm Weight 4.8 Kg/m2
Roll 1 x 8 m
4.8 Kg Pallet 200 m2
Trafficable and non-trafficable flat roofs, warm
4 mm and inverted roofs, single layer and multi-layer
system. High tear and puncturing strength.
APP modified-bitumen
4 Kg Weight 4 Kg/m2
Morterplas FP waterproofing membrane with
polyester reinforcement. Roll 1 x 10 m
Moply FP 3 mm
Pallet 250 m2
14 15
w a t e r p r o o f i n g
SBS modified-bitumen Weight 4.8 Kg/m2 Car park roofs with asphaltic Weight 5 Kg/m2 Non-trafficable flat and pitched roofs, in single
waterproofing membrane with agglomerate finish. Public areas Morterplas 5 Kg
Morterplas Parking Roll 1 x 8 m Roll 1 x 8 m or multi-layer layer system.
double polyester reinforcement. waterproofing. Tanking. High tear, SBS FPV
Pallet 200 m2 MIN. 4 mm Pallet 200 m2
Finished in polyester mat for puncturing and temperature
Mineral finished, SBS
additional protection. resistance.
modified- bitumen
waterproofing membrane with
Morterplas SBS modified-bitumen Weight 3 Kg/m2 Non-trafficable flat and pitched roofs, in multi- Morterplas stabilized polyester
SBS FM 3 Kg waterproofing membrane with Roll 1 x 13 m layer system as a finishing membrane, reinforcement.
SBS FPV 4 Kg
special polyester reinforcement mechanically fixing as a first layer. MIN.
DITE Pallet 325 m2
designed for mechanical fixing.
Weight 4 Kg/m2
Weight 5 Kg/m2 Non-trafficable flat and pitched roofs, in multi-
5 Kg SBS modified- bitumen Bridge deck waterproofing on railway structures, Roll 1 x 10 m layer system as a finishing membrane.
Morterplas waterproofing membrane with Roll 1 x 8 m motorways and roads. Pallet 250 m2
SBS FP-T 4 mm high resistance polyester Mineral finished, SBS modified-
Pallet 200 m2 Morterplas
reinforcement. SBS FV bitumen waterproofing
4 Kg
MIN. membrane with fibre-glass
Weight 4.8 Kg/m2 reinforcement.
4.8 Kg
Morterplas SBS FP Roll 1 x 8 m
4 mm Pallet 200 m2
Trafficable and non-trafficable flat roofs, warm Morterplas Mineral finished, SBS Weight 6 Kg/m2 Bridge deck waterproofing on railway structures,
and inverted roofs, single layer and multi-layer SBS FP-T 6 Kg modified-bitumen Roll 1 x 7 m motorways and roads.
SBS modified- bitumen Weight 4 Kg/m 2
system. High tear and puncturing strength. waterproofing membrane
4 Kg MIN. Piz. natural Pallet 175 m2
waterproofing membrane 5 mm
Morterplas SBS FP Roll 1 x 10 m with stabilized polyester
3 mm with stabilised polyester reinforcement.
reinforcement. Palet 250 m2
Weight 3 Kg/m2
Trafficable and non-trafficable flat roofs, warm Morterplas Mineral finished, SBS Weight 5 Kg/m2 Non-trafficable flat and pitched roofs, warm
Morterplas SBS FP 3 Kg Roll 1 x 13 m and inverted roofs, in multi-layer system as the SBS FM MIN. 5 Kg modified-bitumen Roll 1 x 8 m roofs, in single layer system, mechanically
Pallet 325 m2 upper layer. High tear and puncturing strength. waterproofing membrane with fxing.
4 mm Pallet 200 m2
special polyester reinforcement
DITE designed for mechanical fixing.
SBS modified- bitumen Weight 4 Kg/m2 Trafficable and non-trafficable inverted flat roofs,
4 Kg
Morterplas SBS FV waterproofing membrane with Roll 1 x 10 m single layer and multi-layer system. High Unreinforced, aluminium Weight 3 Kg/m2 Perimeters and detail flashing.
3 mm fibre-glass reinforcement. Pallet 250 m2 dimensional stability. Morterplas finished, SBS modified Roll 1 x 13 m
3 Kg
SBS ALU waterproofing membrane.
Pallet 325 m2
SBS modified- bitumen Weight 3 Kg/m2 Trafficable and non-trafficable flat roofs, warm
Morterplas SBS FV 3 Kg waterproofing membrane with Roll 1 x 13 m and inverted roofs, in multi-layer system as a
fibre-glass reinforcement. Pallet 325 m2 first layer. High dimensional stability.
SBS modified- bitumen Weight 2.4 Kg/m2 Trafficable and non-trafficable flat roofs, warm
Morterplas SBS FV 2.4 Kg waterproofing membrane with and inverted roofs, in multi-layer system as a
Roll 1 x 15 m
GR-2 2 mm fibre-glass reinforcement with first layer bonded to the support.
Pallet 375 m2 High dimensional stability
sand finish on the upper side.
16 17
w a t e r p r o o f i n g
SBS modified-bitumen Weight 4.8 Kg/m2 Car park roofs with asphaltic Weight 5 Kg/m2 Non-trafficable flat and pitched roofs, in single
waterproofing membrane with agglomerate finish. Public areas Morterplas 5 Kg
Morterplas Parking Roll 1 x 8 m Roll 1 x 8 m or multi-layer layer system.
double polyester reinforcement. waterproofing. Tanking. High tear, SBS FPV
Pallet 200 m2 MIN. 4 mm Pallet 200 m2
Finished in polyester mat for puncturing and temperature
Mineral finished, SBS
additional protection. resistance.
modified- bitumen
waterproofing membrane with
Morterplas SBS modified-bitumen Weight 3 Kg/m2 Non-trafficable flat and pitched roofs, in multi- Morterplas stabilized polyester
SBS FM 3 Kg waterproofing membrane with Roll 1 x 13 m layer system as a finishing membrane, reinforcement.
SBS FPV 4 Kg
special polyester reinforcement mechanically fixing as a first layer. MIN.
DITE Pallet 325 m2
designed for mechanical fixing.
Weight 4 Kg/m2
Weight 5 Kg/m2 Non-trafficable flat and pitched roofs, in multi-
5 Kg SBS modified- bitumen Bridge deck waterproofing on railway structures, Roll 1 x 10 m layer system as a finishing membrane.
Morterplas waterproofing membrane with Roll 1 x 8 m motorways and roads. Pallet 250 m2
SBS FP-T 4 mm high resistance polyester Mineral finished, SBS modified-
Pallet 200 m2 Morterplas
reinforcement. SBS FV bitumen waterproofing
4 Kg
MIN. membrane with fibre-glass
Weight 4.8 Kg/m2 reinforcement.
4.8 Kg
Morterplas SBS FP Roll 1 x 8 m
4 mm Pallet 200 m2
Trafficable and non-trafficable flat roofs, warm Morterplas Mineral finished, SBS Weight 6 Kg/m2 Bridge deck waterproofing on railway structures,
and inverted roofs, single layer and multi-layer SBS FP-T 6 Kg modified-bitumen Roll 1 x 7 m motorways and roads.
SBS modified- bitumen Weight 4 Kg/m 2
system. High tear and puncturing strength. waterproofing membrane
4 Kg MIN. Piz. natural Pallet 175 m2
waterproofing membrane 5 mm
Morterplas SBS FP Roll 1 x 10 m with stabilized polyester
3 mm with stabilised polyester reinforcement.
reinforcement. Palet 250 m2
Weight 3 Kg/m2
Trafficable and non-trafficable flat roofs, warm Morterplas Mineral finished, SBS Weight 5 Kg/m2 Non-trafficable flat and pitched roofs, warm
Morterplas SBS FP 3 Kg Roll 1 x 13 m and inverted roofs, in multi-layer system as the SBS FM MIN. 5 Kg modified-bitumen Roll 1 x 8 m roofs, in single layer system, mechanically
Pallet 325 m2 upper layer. High tear and puncturing strength. waterproofing membrane with fxing.
4 mm Pallet 200 m2
special polyester reinforcement
DITE designed for mechanical fixing.
SBS modified- bitumen Weight 4 Kg/m2 Trafficable and non-trafficable inverted flat roofs,
4 Kg
Morterplas SBS FV waterproofing membrane with Roll 1 x 10 m single layer and multi-layer system. High Unreinforced, aluminium Weight 3 Kg/m2 Perimeters and detail flashing.
3 mm fibre-glass reinforcement. Pallet 250 m2 dimensional stability. Morterplas finished, SBS modified Roll 1 x 13 m
3 Kg
SBS ALU waterproofing membrane.
Pallet 325 m2
SBS modified- bitumen Weight 3 Kg/m2 Trafficable and non-trafficable flat roofs, warm
Morterplas SBS FV 3 Kg waterproofing membrane with Roll 1 x 13 m and inverted roofs, in multi-layer system as a
fibre-glass reinforcement. Pallet 325 m2 first layer. High dimensional stability.
SBS modified- bitumen Weight 2.4 Kg/m2 Trafficable and non-trafficable flat roofs, warm
Morterplas SBS FV 2.4 Kg waterproofing membrane with and inverted roofs, in multi-layer system as a
Roll 1 x 15 m
GR-2 2 mm fibre-glass reinforcement with first layer bonded to the support.
Pallet 375 m2 High dimensional stability
sand finish on the upper side.
16 17
w a t e r p r o o f i n g
SELF-ADHESIVE
Self-adhesives membranes Special application membranes
Product Description Packaging Application Product Description Packaging Application
Texself FV 4 Kg MIN. Mineral finished, self-adhesive Weight 4 Kg/m2 Concrete and plywood flat and pitched roofs Morterplas Garden MIN. Mineral finished APP modified- Weight 5 Kg/m2 Non-trafficable flat green roofs, warm and
waterproofing membrane with Roll 1 x 10 m Piz. verde / natural bitumen waterproofing Roll 1 x 8 m inverted roofs, single layer or multi-layer system.
fibre glass reinforcement. Pallet 250 m2 membrane with polyester
Pallet 200 m2
ANTI-ROOT reinforcement and rootproof
treatment.
Morterplas FP APP modified-bitumen Weight 4 Kg/m2 Non-trafficable flat green roofs, warm and
Texself AL Natural 1.5 mm Aluminium finished self- Thickness 1.5 mm Details flashing and refurbishing Garden waterproofing membrane with Roll 1 x 10 m inverted roofs, single layer or multi-layer system.
adhesive waterproofing Roll 1 x 20 m 4 Kg polyester reinforcement and High tear and puncturing strength.
membrane. Moply FP rootproof treatment. Pallet 250 m2
Pallet 500 m2 ANTI-ROOT Garden
Morterplas Parking SBS modified-bitumen waterproofing Weight 4.8 Kg/m2 Car park roofs with asphaltic agglomerate finish.
Thickness 2 mm membrane with double polyester Public areas waterproofing. Tanking. High tear,
2 mm Self-adhesive waterproofing Roll 1.1 x 15 m Roll 1 x 8 m
membrane with polyethylene Pallet 379.5 m2 reinforcement. Finished in polyester puncturing and temperature resistance.
CAR PARK Pallet 200 m2
Texself PE reinforcement finished with a mat for additional protection.
polyethylene film on its upper Thickness 3 mm
3 mm Roll 1.1 x 15 m Morterplas FP-T 6 Kg Mineral finished, APP modified Weight 6 Kg/m2 Bridge decks on railway structures,
side. Tanking and external walls roofing underlay MIN. bitumen waterproofing motorways and roads. Flat roofs.
Pallet 379.5 m2 5 mm Roll 1 x 7 m
and vapour barrier. membrane with stabilised Pallet 175 m2
Self-adhesive waterproofing polyester reinforcement.
Thickness 2 mm BRIDGES
membrane with fibre-glass
Texself FV 2 mm reinforcement finished with a Roll 1 x 15 m
polyethylene film on its upper Pallet 345 m2 Weight 4.8 Kg/m2
4,8 Kg 0% slope flat roof - texlosa finish.
side. APP modified-bitumen, Roll 1.1 x 8 m
4 mm waterproofing membrane Pallet 202.4 m2 Trafficable and non-trafficable flat roofs, warm
Texself FV 2C Self-adhesive both sides Thickness 2 mm Pitched and flat roofs. Thermal insulation Hipermorterplas with double reinforcement
Weight 4 kg/m2 and inverted roofs, single layer and multi-layer
waterproofing membrane with Roll 1 x 15 m bonded on its upper side. TANKING BRIDGES of polyester felt and system. High tear and puncturing strength.
a fibre-glass reinforcement. 4 Kg polyethylene. Roll 1.1 x 10 m
Pallet 345 m2
Pallet 253 m2
Self-adhesive waterproofing Thickness 1.5 mm Texself M Self-adhesive waterproofing Thickness 1.5 mm Tanking and external walls, wet areas (baths,
Texself M Tanking and external walls, wet areas (baths,
membrane finished with a membrane finished with a Roll 1.1 x 20 m kitchens), balconies. Capillarity barrier.
Roll 1.1 x 20 m kitchens), balconies. Capillarity barrier.
polyethylene film on its upper polyethylene film on its upper side.
Pallet 506 m2 TANKING
Pallet 506 m2
SELF-ADHESIVE
side.
Texself HD 1.5 mm Self-adhesive waterproofing Thickness 1.5 mm Tanking and external walls. Wet areas (baths,
Texself 1.5 Self-adhesive waterproofing Thickness 1.5 mm Tanking and external walls. Wet areas (baths, membrane finished with a Roll 1.1 x 20 m kitchens). Balconies. Capillarity barrier.
membrane finished with a HDPE Roll 1.1 x 20 m kitchens). Balconies. Capillarity barrier. polypropylene mesh on its upper side.
SELF-ADHESIVE TANKING Pallet 506 m2
cross-laminated polyethylene Pallet 506 m2
film on its upper side. Texself GS 2 mm Self-adhesive waterproofing Thickness 2 mm Methan and Radon gas barrier.
membrane with aluminium - Roll 1 x 15 m Water vapour barrier.
Self-adhesive waterproofing polyethylene (AL+PE) reinforcement
Texself HD 1.5 mm Thickness 1.5 mm External walls, balconies, wet areas (baths, Pallet 345 m2
membrane finished with a composite finished with a
Roll 1.1 x 20 m kitchens). SELF-ADHESIVE RADON
polyethylene film on its upper side.
polypropylene mesh on its
upper side. Pallet 506 m2
Texself PE 2 mm Self-adhesive waterproofing Thickness 2 mm Tanking and external walls roofing underlay
Self-adhesive waterproofing membrane with polyethylene Roll 1.1 x 15 m and vapour barrier.
Texself GS 2 mm Thickness 2 mm Methan and Radon gas barrier. reinforcement finished with a
membrane with aluminium - Water vapour barrier. SELF-ADHESIVE TANKING Pallet 379,5 m2
polyethylene (AL+PE) Roll 1 x 15 m polyethylene film on its upper side.
reinforcement composite Pallet 345 m2
Plasfal 3 Kg AL Aluminium finished oxidated Weight 3 Kg/m2 Finishing membrane in multi-layer systems
finished with a polyethylene film Natural / Rojo bitumen waterproofing and details flashing
on its upper side. Roll 1 x 13 m
membrane.
ALUMINIUM Pallet 325 m2
Texbase Oxidated bitumen-based Weight 1.2 Kg/m2 Continuity layer on discontinuous or irregular
protective separating layer with Roll 1 x 30 m supports. Protection of insulation in bituminous
polyester reinforcement. waterproofing welded application.
Pallet 750 m2
Texbase P Oxidated bitumen-based Weight 1.2 Kg/m2 Continuity layer on discontinuous or irregular
perforated protective separating Roll 1 x 30 m supports. Protection of insulation in bituminous
layer with polyester reinforcement. waterproofing welded application.
Pallet 750 m2
18 19
w a t e r p r o o f i n g
SELF-ADHESIVE
Self-adhesives membranes Special application membranes
Product Description Packaging Application Product Description Packaging Application
Texself FV 4 Kg MIN. Mineral finished, self-adhesive Weight 4 Kg/m2 Concrete and plywood flat and pitched roofs Morterplas Garden MIN. Mineral finished APP modified- Weight 5 Kg/m2 Non-trafficable flat green roofs, warm and
waterproofing membrane with Roll 1 x 10 m Piz. verde / natural bitumen waterproofing Roll 1 x 8 m inverted roofs, single layer or multi-layer system.
fibre glass reinforcement. Pallet 250 m2 membrane with polyester
Pallet 200 m2
ANTI-ROOT reinforcement and rootproof
treatment.
Morterplas FP APP modified-bitumen Weight 4 Kg/m2 Non-trafficable flat green roofs, warm and
Texself AL Natural 1.5 mm Aluminium finished self- Thickness 1.5 mm Details flashing and refurbishing Garden waterproofing membrane with Roll 1 x 10 m inverted roofs, single layer or multi-layer system.
adhesive waterproofing Roll 1 x 20 m 4 Kg polyester reinforcement and High tear and puncturing strength.
membrane. Moply FP rootproof treatment. Pallet 250 m2
Pallet 500 m2 ANTI-ROOT Garden
Morterplas Parking SBS modified-bitumen waterproofing Weight 4.8 Kg/m2 Car park roofs with asphaltic agglomerate finish.
Thickness 2 mm membrane with double polyester Public areas waterproofing. Tanking. High tear,
2 mm Self-adhesive waterproofing Roll 1.1 x 15 m Roll 1 x 8 m
membrane with polyethylene Pallet 379.5 m2 reinforcement. Finished in polyester puncturing and temperature resistance.
CAR PARK Pallet 200 m2
Texself PE reinforcement finished with a mat for additional protection.
polyethylene film on its upper Thickness 3 mm
3 mm Roll 1.1 x 15 m Morterplas FP-T 6 Kg Mineral finished, APP modified Weight 6 Kg/m2 Bridge decks on railway structures,
side. Tanking and external walls roofing underlay MIN. bitumen waterproofing motorways and roads. Flat roofs.
Pallet 379.5 m2 5 mm Roll 1 x 7 m
and vapour barrier. membrane with stabilised Pallet 175 m2
Self-adhesive waterproofing polyester reinforcement.
Thickness 2 mm BRIDGES
membrane with fibre-glass
Texself FV 2 mm reinforcement finished with a Roll 1 x 15 m
polyethylene film on its upper Pallet 345 m2 Weight 4.8 Kg/m2
4,8 Kg 0% slope flat roof - texlosa finish.
side. APP modified-bitumen, Roll 1.1 x 8 m
4 mm waterproofing membrane Pallet 202.4 m2 Trafficable and non-trafficable flat roofs, warm
Texself FV 2C Self-adhesive both sides Thickness 2 mm Pitched and flat roofs. Thermal insulation Hipermorterplas with double reinforcement
Weight 4 kg/m2 and inverted roofs, single layer and multi-layer
waterproofing membrane with Roll 1 x 15 m bonded on its upper side. TANKING BRIDGES of polyester felt and system. High tear and puncturing strength.
a fibre-glass reinforcement. 4 Kg polyethylene. Roll 1.1 x 10 m
Pallet 345 m2
Pallet 253 m2
Self-adhesive waterproofing Thickness 1.5 mm Texself M Self-adhesive waterproofing Thickness 1.5 mm Tanking and external walls, wet areas (baths,
Texself M Tanking and external walls, wet areas (baths,
membrane finished with a membrane finished with a Roll 1.1 x 20 m kitchens), balconies. Capillarity barrier.
Roll 1.1 x 20 m kitchens), balconies. Capillarity barrier.
polyethylene film on its upper polyethylene film on its upper side.
Pallet 506 m2 TANKING
Pallet 506 m2
SELF-ADHESIVE
side.
Texself HD 1.5 mm Self-adhesive waterproofing Thickness 1.5 mm Tanking and external walls. Wet areas (baths,
Texself 1.5 Self-adhesive waterproofing Thickness 1.5 mm Tanking and external walls. Wet areas (baths, membrane finished with a Roll 1.1 x 20 m kitchens). Balconies. Capillarity barrier.
membrane finished with a HDPE Roll 1.1 x 20 m kitchens). Balconies. Capillarity barrier. polypropylene mesh on its upper side.
SELF-ADHESIVE TANKING Pallet 506 m2
cross-laminated polyethylene Pallet 506 m2
film on its upper side. Texself GS 2 mm Self-adhesive waterproofing Thickness 2 mm Methan and Radon gas barrier.
membrane with aluminium - Roll 1 x 15 m Water vapour barrier.
Self-adhesive waterproofing polyethylene (AL+PE) reinforcement
Texself HD 1.5 mm Thickness 1.5 mm External walls, balconies, wet areas (baths, Pallet 345 m2
membrane finished with a composite finished with a
Roll 1.1 x 20 m kitchens). SELF-ADHESIVE RADON
polyethylene film on its upper side.
polypropylene mesh on its
upper side. Pallet 506 m2
Texself PE 2 mm Self-adhesive waterproofing Thickness 2 mm Tanking and external walls roofing underlay
Self-adhesive waterproofing membrane with polyethylene Roll 1.1 x 15 m and vapour barrier.
Texself GS 2 mm Thickness 2 mm Methan and Radon gas barrier. reinforcement finished with a
membrane with aluminium - Water vapour barrier. SELF-ADHESIVE TANKING Pallet 379,5 m2
polyethylene (AL+PE) Roll 1 x 15 m polyethylene film on its upper side.
reinforcement composite Pallet 345 m2
Plasfal 3 Kg AL Aluminium finished oxidated Weight 3 Kg/m2 Finishing membrane in multi-layer systems
finished with a polyethylene film Natural / Rojo bitumen waterproofing and details flashing
on its upper side. Roll 1 x 13 m
membrane.
ALUMINIUM Pallet 325 m2
Texbase Oxidated bitumen-based Weight 1.2 Kg/m2 Continuity layer on discontinuous or irregular
protective separating layer with Roll 1 x 30 m supports. Protection of insulation in bituminous
polyester reinforcement. waterproofing welded application.
Pallet 750 m2
Texbase P Oxidated bitumen-based Weight 1.2 Kg/m2 Continuity layer on discontinuous or irregular
perforated protective separating Roll 1 x 30 m supports. Protection of insulation in bituminous
layer with polyester reinforcement. waterproofing welded application.
Pallet 750 m2
18 19
w a t e r p r o o f i n g
Texself Band AL Natural Self-adhesive waterproofing Weight 1.5 Kg/m2 Sealing of aluminium finished roofs. Weight 11 Kg/m2
1.5 mm Red band finished in reinforced Sealing of joints and overlaps. Tegola Canadese Waterproofing bituminous
Roll 12 x 0,15 m and Pack of 3.05 m2
aluminum on its upper side. Sealing of chimneys, pipes and in general, Tradicional shingles made of oxidized
12 x 0.30 m bitumen with fibre glass Pallet of 158.6 m2
building elements prone to leaks. Waterproofing and finishing in pitched roof.
Boxes of 4 or 2 roll. reinforcement and finished
with mineral in different Excellent aging resistance to atmospheric agents.
Tegola Canadese Master
colours Note: Additional waterproofing may be required.
Texself Band 1.5 mm Self-adhesive waterproofing Weight 1.5 Kg/m2 Remedial work and reinforcement of roofing.
Weight 15 Kg/m2
band with cross-laminated Roll 12 x 0.15 m and Sealing of joints and overlaps, gutter chute and
polyethylene film on its upper rain-pipe joints. Tegola Canadese Master Pack of 2.00 m2
12 x 0.30 m
side. Pallet of 128 m2
Boxes of 4 or 2 roll.
19 cm PVC
Pre-formed PVC joint with plasticiser
Junta Gum
24 cm PVC
Width from 15 to 32 cm. Structural joints.
Bituminous corrugated sheets
Roll 25 m
32 cm PVC Product Description Packaging Application
20 21
w a t e r p r o o f i n g
Texself Band AL Natural Self-adhesive waterproofing Weight 1.5 Kg/m2 Sealing of aluminium finished roofs. Weight 11 Kg/m2
1.5 mm Red band finished in reinforced Sealing of joints and overlaps. Tegola Canadese Waterproofing bituminous
Roll 12 x 0,15 m and Pack of 3.05 m2
aluminum on its upper side. Sealing of chimneys, pipes and in general, Tradicional shingles made of oxidized
12 x 0.30 m bitumen with fibre glass Pallet of 158.6 m2
building elements prone to leaks. Waterproofing and finishing in pitched roof.
Boxes of 4 or 2 roll. reinforcement and finished
with mineral in different Excellent aging resistance to atmospheric agents.
Tegola Canadese Master
colours Note: Additional waterproofing may be required.
Texself Band 1.5 mm Self-adhesive waterproofing Weight 1.5 Kg/m2 Remedial work and reinforcement of roofing.
Weight 15 Kg/m2
band with cross-laminated Roll 12 x 0.15 m and Sealing of joints and overlaps, gutter chute and
polyethylene film on its upper rain-pipe joints. Tegola Canadese Master Pack of 2.00 m2
12 x 0.30 m
side. Pallet of 128 m2
Boxes of 4 or 2 roll.
19 cm PVC
Pre-formed PVC joint with plasticiser
Junta Gum
24 cm PVC
Width from 15 to 32 cm. Structural joints.
Bituminous corrugated sheets
Roll 25 m
32 cm PVC Product Description Packaging Application
20 21
w a t e r p r o o f i n g
1.2
Roll 2.05 x 20 m
PVC-P based waterproofing Pallet 738 m2
1.5 membrane with fibre glass Loose laid ballasted and fully bonded
Vinitex MAT FB tissue reinforcement, and waterproofing layer on flat roof, inverted roofs,
green roofs and roof gardens. High Dimensional
Basement, underground structures and tunnels
backed with a polyester fleece.
1.8 Stability.
UV Resistant. Roll 2.05 x 15 m Product Description Packaging Application
Pallet 558 m2
2.0
1.5 PVC-P based translucent
PVC-P based waterproofing Vinitex Tunnel TR membrane unreinforced.
1.2
membrane without Roll 2.05 x 20 m 2.0
Vinitex SA reinforcement. Pallet 738 m2 Details installation and flashing. 2.05 m x as Basement, underground structures
1.5 requested and Tunnels.
UV Resistant. 1.5 PVC-P based yellow-black
Vinitex Tunnel SL membrane unreinforced.
2.0
22 23
w a t e r p r o o f i n g
1.2
Roll 2.05 x 20 m
PVC-P based waterproofing Pallet 738 m2
1.5 membrane with fibre glass Loose laid ballasted and fully bonded
Vinitex MAT FB tissue reinforcement, and waterproofing layer on flat roof, inverted roofs,
green roofs and roof gardens. High Dimensional
Basement, underground structures and tunnels
backed with a polyester fleece.
1.8 Stability.
UV Resistant. Roll 2.05 x 15 m Product Description Packaging Application
Pallet 558 m2
2.0
1.5 PVC-P based translucent
PVC-P based waterproofing Vinitex Tunnel TR membrane unreinforced.
1.2
membrane without Roll 2.05 x 20 m 2.0
Vinitex SA reinforcement. Pallet 738 m2 Details installation and flashing. 2.05 m x as Basement, underground structures
1.5 requested and Tunnels.
UV Resistant. 1.5 PVC-P based yellow-black
Vinitex Tunnel SL membrane unreinforced.
2.0
22 23
w a t e r p r o o f i n g
Mopren Plus Liquid-applied polyurethane Drums of 25 Kg. Trafficable and non-trafficable roofs, terraces
waterproofing membrane. 36 Drums/Pallet = 900 Kg. and balconies. White
Acrylic copolymer-, Waterproofing of flat roofs, terraces,....
Grey 5 and 20 Kg drums
longlasting- and permanent
Black Pallet of 360 and Reroofing of roofs with porous finishing
Mopren Park Aliphatic top-coat traffic- Drums of 20 Kg. Finishing layer in car parks and UV exposed Impertexsa elasticity-based elastic and
Red 400 Kg
resistant. 36 Drums/Pallet = 750 Kg. waterproofing. waterproof coating. Waterproofing of vertical surfaces.
Green
Tile
Mopren UV Aliphatic polyurethane Drums of 20 Kg. Finishing layer in trafficable flat roofs and Impertexsa
alifático top-coat UV resistant. 36 Drums/Pallet = 750 Kg. balconies, UV exposed.
Mopren EP Two component water-based Component A: drums of 15 Kg Primer for polyurethane, polyurea and Emufal I Water based bituminous primer Drums of 9 Kg and pallet Preparation of surfaces to receive waterproofing
Primer epoxy primer. 36 Drums/Pallet. polyurethane mastics liquid waterproofing of 405 Kg. membranes in order to improve the adherence
systems. Drums of 24 Kg and pallet
Component B: drums of 3 Kg of 528 Kg.
36 Drums/Pallet.
Emufal N Asphaltic emulsion Drums of 10 Kg and pallet Protection of walls, dividing walls.
Mopren R Polyurethane adhesive Drums of 6 Kg. Detail flashing (chimneys, domes, pipes,...) of 450 Kg.
Remates compound. Coating of tanks and conduits for non-potable
125 Drums/Pallet = 750 Kg. Drums of 25 Kg and pallet water
of 550 Kg.
Emufal Emufal TE Rubber-modified bituminous Drums of 9 Kg and pallet Protection of walls, dividing walls.
Mopren Reac 25 Accelerating additive. Drums of 1 Kg. Accelerating for the polyurethane emulsion of 405 Kg. Coating of tanks and conduits for non-potable
Box of 12 drums = 300 Kg waterproofing membrane in areas with low Drums of 24 Kg and pallet water
temperatures. of 528 Kg.
Pallet.
Special rubber-modified Drums of 23 Kg and pallet Adherence of waterproofing membranes to
Adhesivo P bituminous emulsion of 506 Kg. supports as concrete, car park roofs,…
Rooftex Fleece Synthetic reinforcement. Roll 100 m x 1 m. Reinforcement for the liquid waterproofing
membrane systems in trafficble and non-
trafficable flat roofs, terraces, balconies and
where a reinforcement is required. Oxidized bitumen Hot-applied oxidated bitumen Bags of 20 Kg. Support of fully-bonded waterproofing
90/40 for hot application. membranes.
Rooftex Fleece Synthetic reinforcement band. Bands of 100 m x 0.3 m. Band for reinforcement in joints
Band and details.
15 Cold-applied, black, rubber- Box of 52-30-20 ml. Sealing of joints in external walls, floors,
Junter F Junter F 20 bitumen plastic mastic Pallets of 1.040-600-400 ml. concrete floors.
Diameters 15-20-25 mm. Sealant of joints in reservoirs, tanks, silos.
25
Junter Flex Rubber-asphaltic mastic. Box of 30 units. Sealing of joints in metal decks, irrigation
canals,…
Texsajoint Hot-applied, modified elastomeric Box of 25 Kg. Sealing of joints in bridge decks, car parks,
asphalt -based bridge deck viaducts.
expansion joint. Filling and sealing of cracks, fissures and joints
in asphalt or concrete flooring
24 25
w a t e r p r o o f i n g
Mopren Plus Liquid-applied polyurethane Drums of 25 Kg. Trafficable and non-trafficable roofs, terraces
waterproofing membrane. 36 Drums/Pallet = 900 Kg. and balconies. White
Acrylic copolymer-, Waterproofing of flat roofs, terraces,....
Grey 5 and 20 Kg drums
longlasting- and permanent
Black Pallet of 360 and Reroofing of roofs with porous finishing
Mopren Park Aliphatic top-coat traffic- Drums of 20 Kg. Finishing layer in car parks and UV exposed Impertexsa elasticity-based elastic and
Red 400 Kg
resistant. 36 Drums/Pallet = 750 Kg. waterproofing. waterproof coating. Waterproofing of vertical surfaces.
Green
Tile
Mopren UV Aliphatic polyurethane Drums of 20 Kg. Finishing layer in trafficable flat roofs and Impertexsa
alifático top-coat UV resistant. 36 Drums/Pallet = 750 Kg. balconies, UV exposed.
Mopren EP Two component water-based Component A: drums of 15 Kg Primer for polyurethane, polyurea and Emufal I Water based bituminous primer Drums of 9 Kg and pallet Preparation of surfaces to receive waterproofing
Primer epoxy primer. 36 Drums/Pallet. polyurethane mastics liquid waterproofing of 405 Kg. membranes in order to improve the adherence
systems. Drums of 24 Kg and pallet
Component B: drums of 3 Kg of 528 Kg.
36 Drums/Pallet.
Emufal N Asphaltic emulsion Drums of 10 Kg and pallet Protection of walls, dividing walls.
Mopren R Polyurethane adhesive Drums of 6 Kg. Detail flashing (chimneys, domes, pipes,...) of 450 Kg.
Remates compound. Coating of tanks and conduits for non-potable
125 Drums/Pallet = 750 Kg. Drums of 25 Kg and pallet water
of 550 Kg.
Emufal Emufal TE Rubber-modified bituminous Drums of 9 Kg and pallet Protection of walls, dividing walls.
Mopren Reac 25 Accelerating additive. Drums of 1 Kg. Accelerating for the polyurethane emulsion of 405 Kg. Coating of tanks and conduits for non-potable
Box of 12 drums = 300 Kg waterproofing membrane in areas with low Drums of 24 Kg and pallet water
temperatures. of 528 Kg.
Pallet.
Special rubber-modified Drums of 23 Kg and pallet Adherence of waterproofing membranes to
Adhesivo P bituminous emulsion of 506 Kg. supports as concrete, car park roofs,…
Rooftex Fleece Synthetic reinforcement. Roll 100 m x 1 m. Reinforcement for the liquid waterproofing
membrane systems in trafficble and non-
trafficable flat roofs, terraces, balconies and
where a reinforcement is required. Oxidized bitumen Hot-applied oxidated bitumen Bags of 20 Kg. Support of fully-bonded waterproofing
90/40 for hot application. membranes.
Rooftex Fleece Synthetic reinforcement band. Bands of 100 m x 0.3 m. Band for reinforcement in joints
Band and details.
15 Cold-applied, black, rubber- Box of 52-30-20 ml. Sealing of joints in external walls, floors,
Junter F Junter F 20 bitumen plastic mastic Pallets of 1.040-600-400 ml. concrete floors.
Diameters 15-20-25 mm. Sealant of joints in reservoirs, tanks, silos.
25
Junter Flex Rubber-asphaltic mastic. Box of 30 units. Sealing of joints in metal decks, irrigation
canals,…
Texsajoint Hot-applied, modified elastomeric Box of 25 Kg. Sealing of joints in bridge decks, car parks,
asphalt -based bridge deck viaducts.
expansion joint. Filling and sealing of cracks, fissures and joints
in asphalt or concrete flooring
24 25
t h e r m a l i n s u l a t i o n
30 / 40
Styrofoam IB 1250 x 600 mm and 50 mm Exterior insulation (façades).
PIR (Polyisocianurate)
rigid board with fibre
25 mm
30 mm
Multifoil aluminium insulation: Texsaterm
glass bituminous tissue 40 mm Thermal insulation and support for
Aisladeck BV faced on upper side Product Description Packaging Uses
... waterproofing membranes torched on
Sheet sizes: or hot welded in metal deck roofs.
2.500 x 1.200 mm 80 mm Aluminium + polyethylene bubble
Floors and
Aisladeck + Aluminium
B Roll 12.5 x 1.2 m - Pallet 720 m2 as complement
Nº of layers: 3
of insulation.
Thickness: 3 mm
PIR (Polyisocianurate) 25 mm
rigid board with aluminium 30 mm Thermal insulation and support for Aluminium + double polyethylene bubble
waterproofing membranes Heated floors and
Aisladeck AL faced both sides. 40 mm + Aluminium
mechanically fixed in roofs. The aluminium Texsaterm 2B ALU 2B ALU Roll 12.5 x 1.2 m - Pallet 420 m2 as complement
Sheet sizes: ... Nº of layers: 4
provides higher insulation levels. of insulation.
2.500 x 1.200 mm Thickness: 6 mm
60 mm TEXSATERM
7L Aluminium + polyester fibre Roll 9.81 x 1.53 m - Pallet 540 m2
+ polyethylene foam + Aluminium foil
PIR (Polyisocianurate) 25 mm 11L + Aluminium Roll 9.81 x 1.53 m - Pallet 360 m2
30 mm Walls and façades
rigid board with waterproofing Nº of layers: 7, 12, 15 Ceilings
40 mm 15L Thickness: 20, 25, 30 mm Roll 9.81 x 1.53 m - Pallet 360 m2
Aisladeck AK aluminium-kraft composite Cavity walls and pitched roof. Pitched Roofs
faced both sides. ...
Aluminium + fleece batting + polyethylene Under roofs.
Sheet sizes: 700 x 600 mm 100 mm foam + Aluminium foil + Aluminium
PLUS Nº of layers: 18 Roll 9.81 x 1.53 m - Pallet 225 m2
25 mm Thickness: 35 mm
PIR (Polyisocianurate)
rigid board with waterproofing 30 mm
Aisladeck 5C aluminium-kraft composite 40 mm
Roofing.
faced both sides. ...
Texsaterm PLUS
Sheet sizes: 700 x 600 mm 100 mm
26 27
t h e r m a l i n s u l a t i o n
30 / 40
Styrofoam IB 1250 x 600 mm and 50 mm Exterior insulation (façades).
PIR (Polyisocianurate)
rigid board with fibre
25 mm
30 mm
Multifoil aluminium insulation: Texsaterm
glass bituminous tissue 40 mm Thermal insulation and support for
Aisladeck BV faced on upper side Product Description Packaging Uses
... waterproofing membranes torched on
Sheet sizes: or hot welded in metal deck roofs.
2.500 x 1.200 mm 80 mm Aluminium + polyethylene bubble
Floors and
Aisladeck + Aluminium
B Roll 12.5 x 1.2 m - Pallet 720 m2 as complement
Nº of layers: 3
of insulation.
Thickness: 3 mm
PIR (Polyisocianurate) 25 mm
rigid board with aluminium 30 mm Thermal insulation and support for Aluminium + double polyethylene bubble
waterproofing membranes Heated floors and
Aisladeck AL faced both sides. 40 mm + Aluminium
mechanically fixed in roofs. The aluminium Texsaterm 2B ALU 2B ALU Roll 12.5 x 1.2 m - Pallet 420 m2 as complement
Sheet sizes: ... Nº of layers: 4
provides higher insulation levels. of insulation.
2.500 x 1.200 mm Thickness: 6 mm
60 mm TEXSATERM
7L Aluminium + polyester fibre Roll 9.81 x 1.53 m - Pallet 540 m2
+ polyethylene foam + Aluminium foil
PIR (Polyisocianurate) 25 mm 11L + Aluminium Roll 9.81 x 1.53 m - Pallet 360 m2
30 mm Walls and façades
rigid board with waterproofing Nº of layers: 7, 12, 15 Ceilings
40 mm 15L Thickness: 20, 25, 30 mm Roll 9.81 x 1.53 m - Pallet 360 m2
Aisladeck AK aluminium-kraft composite Cavity walls and pitched roof. Pitched Roofs
faced both sides. ...
Aluminium + fleece batting + polyethylene Under roofs.
Sheet sizes: 700 x 600 mm 100 mm foam + Aluminium foil + Aluminium
PLUS Nº of layers: 18 Roll 9.81 x 1.53 m - Pallet 225 m2
25 mm Thickness: 35 mm
PIR (Polyisocianurate)
rigid board with waterproofing 30 mm
Aisladeck 5C aluminium-kraft composite 40 mm
Roofing.
faced both sides. ...
Texsaterm PLUS
Sheet sizes: 700 x 600 mm 100 mm
26 27
a c o u s t i c i n s u l a t i o n
Soundproofing
compound made of Roll 5.5 x 1.20 m Acoustic insulation into
Tecsound® 2FT 80 Pallet 66 m2 cavity walls.
Tecsound® sandwiched
between a porous felt.
50 Roll 6 ml x 0,05 m
Self-adhesive Box of 12 rolls. Damping of metallic structures.
Tecsound S Band
®
soundproofing band. Sealing of joints and overlaps.
Roll 6 ml x 0,07 m
70 Box of 8 rolls.
28 29
a c o u s t i c i n s u l a t i o n
Soundproofing
compound made of Roll 5.5 x 1.20 m Acoustic insulation into
Tecsound® 2FT 80 Pallet 66 m2 cavity walls.
Tecsound® sandwiched
between a porous felt.
50 Roll 6 ml x 0,05 m
Self-adhesive Box of 12 rolls. Damping of metallic structures.
Tecsound S Band
®
soundproofing band. Sealing of joints and overlaps.
Roll 6 ml x 0,07 m
70 Box of 8 rolls.
28 29
g e o t e x t i l e s d r a i n a g e s
400 Roll 60 x 2 m
Geoland 200 HPDE drainage layer with a External tanking and water drainage
SHT Roofing: as a separating layer and Drentex Protect Plus Roll 20 x 2.00 m
as protection for the waterproofing geotextile fleece in one side. below concrete structures.
300
Polypropilene needle membranes and other layers of the
Roll 75 x 2.2 / 3.3 / 6.6 m
punctured geotextile roofing system.
Geoland 400
HT Civil engineering: as a separating, Drainage layer made with a
500 reinforcement and drainage layer. Drentex M Plus polyethylene mesh and geotextile Roll 25 x 2.00 m Tunnels.
bonded in one face.
Roll 75 x 2.25 m
500 Roll 200 x 4.50 m
External tanking and underground
Roll 50 x 1.50 m 100 Roll 32 x 1.25 m structures with a required compression
700 Roll 150 x 2.25 m 3 dimension resistance of 383 kN/m2.
Drentex polystyrene drainage with a
Roll 150 x 4.50 m
Thermally bonded PP+PE Impact geotextile bonded in one side. Tanking or intensive green roofs
Terram non woven geotextile Roll 100 x 2.25 m 200 Roll 32 x 1.25 m wih a required compression strength
1000
Roll 150 x 4.50 m of 712 kN/m2
Roll 100 x 2.25 m
1500 3 dimension drainage layer made
Roll 150 x 4.50 m
with perforated polystyrene and a
Drentex Impact Garden Roll 32 x 1.25 m Tanking and roof garden.
3000 Roll 100 x 4.50 m polypropylene geotextile bonded in
one face.
Drentex Protect 40, 50, 80 Drentex Protect 500 Drentex Protec Plus Drentex M Plus
Drentex Impact 100 y 200 Drentex Impact Garden Drentex Impact Parking
30 31
g e o t e x t i l e s d r a i n a g e s
400 Roll 60 x 2 m
Geoland 200 HPDE drainage layer with a External tanking and water drainage
SHT Roofing: as a separating layer and Drentex Protect Plus Roll 20 x 2.00 m
as protection for the waterproofing geotextile fleece in one side. below concrete structures.
300
Polypropilene needle membranes and other layers of the
Roll 75 x 2.2 / 3.3 / 6.6 m
punctured geotextile roofing system.
Geoland 400
HT Civil engineering: as a separating, Drainage layer made with a
500 reinforcement and drainage layer. Drentex M Plus polyethylene mesh and geotextile Roll 25 x 2.00 m Tunnels.
bonded in one face.
Roll 75 x 2.25 m
500 Roll 200 x 4.50 m
External tanking and underground
Roll 50 x 1.50 m 100 Roll 32 x 1.25 m structures with a required compression
700 Roll 150 x 2.25 m 3 dimension resistance of 383 kN/m2.
Drentex polystyrene drainage with a
Roll 150 x 4.50 m
Thermally bonded PP+PE Impact geotextile bonded in one side. Tanking or intensive green roofs
Terram non woven geotextile Roll 100 x 2.25 m 200 Roll 32 x 1.25 m wih a required compression strength
1000
Roll 150 x 4.50 m of 712 kN/m2
Roll 100 x 2.25 m
1500 3 dimension drainage layer made
Roll 150 x 4.50 m
with perforated polystyrene and a
Drentex Impact Garden Roll 32 x 1.25 m Tanking and roof garden.
3000 Roll 100 x 4.50 m polypropylene geotextile bonded in
one face.
Drentex Protect 40, 50, 80 Drentex Protect 500 Drentex Protec Plus Drentex M Plus
Drentex Impact 100 y 200 Drentex Impact Garden Drentex Impact Parking
30 31
a u x i l i a r y p r o d u c t s
Reinforced thermoplastic
Soporte SNR Box 200 units Flat roofs.
non-adjustable support.
Morrión universal
Reinforced thermoplastic adjustable
Soporte SR support. Box 50-80 units Flat roofs.
32 33
a u x i l i a r y p r o d u c t s
Reinforced thermoplastic
Soporte SNR Box 200 units Flat roofs.
non-adjustable support.
Morrión universal
Reinforced thermoplastic adjustable
Soporte SR support. Box 50-80 units Flat roofs.
32 33
a u x i l i a r y p r o d u c t s
90º angular pre-molded piece of PVC. Horizontal Drain and 90º angular pre-molded piece of PVC. Horizontal Drain and
Vinitex Desagüe Vinitex Gárgola 90º Diámeter: 63-75-90-110 ; 65x100 5 Units Pack Gravelguard for water Texsalón Desagüe Texsalon Gárgola 90º Diámeter: 50-63-75-90-110; 65x100 5 Units Pack Gravelguard for water
and 100x100 mm runoff from the roof. and 100x100 mm runoff from the roof.
Strip of 3 m
Barra de Terminación Special Shape Aluminium profile. 50 Units Pack Wall finishes.
Vinitex Rincón
90º angular pre-molded piece of PVC. Horizontal Drain and 90º angular pre-molded piece of PVC. Horizontal Drain and
Vinitex Desagüe Vinitex Gárgola 90º Diámeter: 63-75-90-110 ; 65x100 5 Units Pack Gravelguard for water Texsalón Desagüe Texsalon Gárgola 90º Diámeter: 50-63-75-90-110; 65x100 5 Units Pack Gravelguard for water
and 100x100 mm runoff from the roof. and 100x100 mm runoff from the roof.
Strip of 3 m
Barra de Terminación Special Shape Aluminium profile. 50 Units Pack Wall finishes.
Vinitex Rincón
E-mail: [email protected]
Customer Service Tel. (+34) 93 635 14 10
w ww. t e x s a . c o m