This document provides a bill of quantities for a fire hydrant system. It includes 16 line items describing the supply and installation of various components of the system such as a downcomer pump, pressure vessel, pipes of different diameters, valves, hydrants, hoses, cabinets and glass doors. The total supply and erection costs are calculated for each item based on the quantities required.
This document provides a bill of quantities for a fire hydrant system. It includes 16 line items describing the supply and installation of various components of the system such as a downcomer pump, pressure vessel, pipes of different diameters, valves, hydrants, hoses, cabinets and glass doors. The total supply and erection costs are calculated for each item based on the quantities required.
This document provides a bill of quantities for a fire hydrant system. It includes 16 line items describing the supply and installation of various components of the system such as a downcomer pump, pressure vessel, pipes of different diameters, valves, hydrants, hoses, cabinets and glass doors. The total supply and erection costs are calculated for each item based on the quantities required.
Sl.No Description Qty Unit Supply Erection Supply Erection 1 Supply, installation, testing and commissioning of Down comer pump comprising of the following: Horizontally mounted centrifugal pump, suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ A.C supply. Fire pump having C.I. body, bronze bronze impeller and S.S. Shaft with mechanical seal, capable for deliverying 900 LPM of water at 30 mts. Head complete with necessary pressure gauge with gun metal shut off cock and syphon on delivery side. The pump should meet the condition of Local fire Authority Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 HZ AC supply for the above pump with a synchronous speed of 2900 R.P.M. with flexible coupling and coupling guard etc. as required. Common base plate for (a) and (b) from M.S. channel as required size. Suitable cement concrete foundation with plaster, Antivibration arrangement of 2 Each 49000 3000 98000 6000 cushy foot mounting.
2 Providing, fixing, testing and
commissioning of pressure vessel (450 mm dia & 1800 mm height) for pressurization of fire system complete with pressure switches with isolation valves, pressure gauge with isolation valve, 1 Each 19860 2500 19860 2500 valves at outlet / drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required
3 Providing, laying, jointing and testing of
following sizes of pipes conforming to IS- 1239 with all accessories like all fittings including tees, elbows, reducers, flanges, pipe headers,rubber gaskets, nuts bolts, washers and fixing the pipes on floor / wall /ceiling with specification. Proividing two coats of synthetic enamel paint of approved shade over a coat of primer. Including painting of legends both direction arrow as per the approval of the architects / consultants. And G.I. pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per consultants requirements including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects Unit Rate Total Amount Sl.No Description Qty Unit Supply Erection Supply Erection For down comer System - G.I Schedule-40 Class`C' Heavy class Pipe a) 25 mm dia 22 Mtr 225 65 4950 1430 b) 50 mm dia 11 Mtr 440 130 4840 1430 c) 80 mm dia 11 Mtr 670 195 7370 2145 d)100 mm dia 6 Mtr 905 260 5430 1560 e)150 mm dia 154 Mtr 1370 390 210980 60060
4 Providing, laying, jointing and testing in
trenches the following sizes of - G.I Schedule-40 Class`C'(heavy class) pipes with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil, refilling, ramming and removing the excavated surplus material and protection to embedded M.S pipes and fittings by wrapping bitumen faced hesian, including proper overlaps on joints making good the same complete as required a) 80 mm dia 33 Mtr 710 195 23430 6435 b) 150 mm dia 22 Mtr 1450 390 31900 8580 5 Providing and Fixing Gun metal Gate valve C.I. Wheel approved quality (screwed end) a) 25 mm dia nominal bore 2 Each 1480 50 2960 100 b) 50 mm nominal bore 3 Each 4225 100 12675 300 c) 80 mm nominal bore 5 Each 10860 150 54300 750
6 Providing &fixing C.I. Sluice valve ( with
cap ) complete with bolts , nuts, rubber insertions etc. ( the tail pieces if required will be paid separately). a) 100 mm dia 2 Each 5145 200 10290 400 b) 150 mm dia 9 Each 7600 300 68400 2700
7 Providing and fixing of C.I. check valve
suitable for pressure 15 Kg/Sqcm. with flanges, Nut, bolts & washers, painting etc. complete as required. a) 150 mm dia 2 Each 5750 300 11500 600
8 Providing & fixing double flanged flexicon
rubber expansion joint with unit control of standard length as per maufacturers specs. Working pressure of 10Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. a) 150 mm dia 3 Each 5740 300 17220 900 Unit Rate Total Amount Sl.No Description Qty Unit Supply Erection Supply Erection 9 Providing & fixing gun metal fire hydrant valve with 100 mm N.B. flanged inlet, brass spindal, one no. 63 mm dia female instantaneous outlet type. G.M. 3 Each 10410 250 31230 750 coupling,blank cap, chain. Conforming to IS:5290. Including tapping from wet riser complete as required.
10 Providing & fixing swinging type First Aid
hose reel in red colour with 36 mts long and 20 mm dia dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & 20 Each 4820 250 96400 5000 nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required
11 Providing and Fixing Hose pipe, 63 mm
dia and 15 mts long, duly reinforced, rubber lined suitable for brusting pressure not less than 22 Kg/Sqcm. conforming to IS 636-1988 type A with gun metal heavy 5 Each 3350 16750 duty instantaneous type coupling ( Pair male & female parts) conforming to IS 903. Complete as required (two nos. for each hydrant)
12 Providing and Fixing 63 mm dia
instantaneous pattern branch short gunmetal pipe, 16 mm dia nozzle 3 Each 1590 4770 conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required.
13 Providing and fixing standard firemans
3 Each 800 2400 axe with heavy rubber handle.
14 Providing and fixing weather proof cabinet
of size not less than 0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary 3 Each 2450 250 7350 750 locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required 15 Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. 20 Each 13500 1500 270000 30000 Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P O colour Unit Rate Total Amount Sl.No Description Qty Unit Supply Erection Supply Erection
16 Approval of fire system from local fire
authority at initial & various other stages of works, including preperation of report / drawings as per local fire authority. 1 LS 75000 75000 Contractor shall include cost of all liasion works which are not explicity mentioned above but are mendatory to have fire authority approved.
17 Providing and fixing inlet breaching having
C.I. body four way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia 2 Each 6630 450 13260 900 gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required.
18 Providing and fixing of Fire Brigade
adopter assembly with 150 mm dia outlet, 1 Each 6630 450 6630 450 suitable for local fire tender complete as required. TOTAL 1032895 208740 GRAND TOTAL 1241635