Scribd Logo
Upload

Welcome to Scribd!

  • Techdoc Xl-Bin

    Uploaded by

    Willy Wakker
    54 views2 pages

    Original Title

    techdoc xl-bin

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    54 views2 pages

    Techdoc Xl-Bin

    Uploaded by

    Willy Wakker

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Technical specifications XL-bin & XL-binS

    XL-bin(S)
    In this documentation you will find information about:

    • Placement
    • Connection
    • Maintenance
    • Options
    • Dynamic Damping Control™
    • Recommendations
    • Technical specifications

    XL-bin & XL-binS.

    Placement Maintenance
    The XL-bin(S) should be placed on the floor. Please note Maintenance on the XL-bin(S), especially on the drivers is
    that bass-response may vary with the position of the best left to official Stage Accompany service personnel.
    cabinet, through “acoustic coupling” (floor, ceiling and wall However, cleaning of the housing can easily be done by
    reflections). yourself with a damp, non fluffing cloth.

    Connection Options
    The XL-bin(S) has one 8-pole and two 4-pole Speakon The XL-bin and XL-binS are finished in blue or black.
    connectors and should be connected to the connector The standard version (XL-bin) is also available in any
    panel of the appropriate power rack which comes with the possible RAL color (Multi Color Option™).
    Performer system. Because the XL-bin(S) is a low
    frequency cabinet it must be connected to the 'low' output
    of the connectorpanel. (see illustration below)
    When the XL-bin(S) is used in combination with an ES
    Series amplifier, use the appropriate filtering module inside
    the amplifier. Then connect the XL-bin(S) to the normal
    output connector of the ES Series amplifier.

    Connect XL-bin(S) to 'low' on PR-2 rack

    Connect XL-bin(S) to 'low' on PR-3 rack

    Connectorpanel of the XL-bin(S) with one 8-pole- and two 4-pole Speakon connector. Connectorpanel of the performer PR-2 and PR-3 racks.
    XL-bin170399EN

    Dynamic Damping Control (DDC™)


    For absolute top quality sound reproduction, the XL-bin(S) is
    completely pre wired for Dynamic Damping Control™.
    The DDC™ system is based on 2 loudspeaker wires that
    return from the speaker to the (SA) amplifier. Through these
    “sense wires” the amplifier can compensate the speaker
    cable and connector resistance, ensuring maximum control
    over the speaker cone movement. Wiring for DDC™ usage with a 4-pole- and a 8-pole Speakon connector.

    Recommendations
    To use the XL-bin(S) separately from the Performer system
    we recommend the ES 20 power amplifier. This amplifier is
    standard equipped with DDC™, resulting in a virtually infinite
    amplifier damping factor at the speaker terminals. To use the
    DDC™ system with an ES 20 amplifier, use Stage Accompany
    CHANNEL 1 (dB)

    4-pole LW Speakon cable (note: use the 8-pole LW Speakon


    -7 -7
    -9 -5 DC DC -9 -5

    -12 -4 THERMAL THERMAL


    -12 -4

    -16 -2 CL IP CL IP -16 -2

    cable for the Performer PR-2 and PR-3 racks!).


    -25 SIGNAL SIGNAL -25 -1
    -1
    -oo 0 POWER POWER -oo 0
    POWER ON / OFF
    CHANNEL 2 (dB)

    The ES 20 's Extended Function Network (EFN™) module can


    ES 20 amplifier.
    provide suitable filtering within the amplifier.

    Technical specifications
    Frequency response : 52 Hz - 135 Hz (+/- 3dB)
    Recommended crossover freq. : 100 Hz - 135 Hz
    Drivers : 2 x SA 1513 LF driver
    Nominal impedance :4Ω
    Sensitivity @ 1W/1m : 107 dB
    SPL program/peak : 136/140 dB
    Max. RMS power : 800 W
    Max. Peak power : 2000 W
    Color : Blue, black, other colors on request
    Front : Expanded metal grille + acoustic transparent cloth
    Connectors : 1 x 8 pole Speakon, 2 x 4 pole Speakons
    Physical dimensions (h x w x d) : XL-bin 730 x 970 x 900 mm (28.7 x 38.2 x 35.4 in.)
    XL-binS 732 x 972 x 905 mm (28.8 x 38.3 x 35.6 in.)
    Weight : XL-bin 75 kg (165 lb), XL-binS 83 kg (183 lb)

    W D W D

    H H

    XL-bin. XL-binS.

    Stage Accompany c Copyright 1999 Stage Accompany.


    Anodeweg 4 The information in this document is continually being developed. Whilst every effort has been made to make it as accurate as
    possible, no warranty of accuracy is made or implied by the makers. Stage Accompany shall have neither liability, nor responsibility to
    1627 LJ HOORN any person or entity with respect to loss or damages in connection with or arising from the information contained in this document.
    The Netherlands
    Tel: +31 (0)229 282930
    Fax: + 31 (0)229 282920
    E-mail: [email protected] A NEW WORLD OF SOUND! ®

    You might also like