HEAT-RESISTANT MATERIAL

●Excellent heat resistance.

●Outstanding dimensional stability.
●Superior resistance to compression.
●Compressive creep characteristics which minimize
deformation due to continuous use for a long time.
●High-grade arc resistance.

HEAT-RESISTANT MATERIAL SERIES While general heat insulating materials withstand

LOSSNA-BOARD
temperatures approximately 200ﾟC, LOSSNA-BOARD, high-
performance heat insulating material, insulates continuously
even at a temperature of 400ﾟC. Stable insulation can be
attained in any heated area such as electric furnaces and drying
ovens for which any conventional heat insulating material is
High-performance heat insulating used.
board which displays the excellent LOSSNA-BOARD also has outstanding“Dimensional stability”.
characteristics on any condition. Today, high accuracy is required in every field of industry.
LOSSNA-BOARD is highly reliable heat insulating material that
minimizes thermal expansion and deformation due to pressure
strain and continuous use. Excellent performance has been
proven in every industrial field as an insulating material for high-
temperature and high-precision forming machines for super
engineering plastics, IC components, vibration-proofing rubber,
and oil seal components.

Optional Specifications
LOSSNA-BOARD of special specifications, which heat
resistance has been further improved (500 to 800ﾟC).

Physical Properties of LOSSNA-BOARD

Test Items Unit
Heat resistance ℃ 400
Flexural strength Vertical to laminations MPa 147

Compressive Vertical to laminations MPa 441

strength
Parallel to laminations MPa 98
Izod impact strength J/cm 2.9
Cleavage strength kN 3.1
Specifications for LOSSNA-BOARD Water absorption ％ 0.05
Max.thickness Min.thickness Material dimension Thermal conductivity W/m・K 0.24

1,000mm×1,000mm Coefficient of thermal expansion Vertical to laminations 1/℃ 2.6×10-5

40mm 1mm 1,000mm×1,200mm Specific gravity ― 2.0
1,000mm×1,250mm
Flatwise withstand voltage (1 min.) kV/mm 10
Normal state MΩ 1.0×108
Insulation resistance
After boiling MΩ 2.0×103

Arc resistance sec 345

 Non-Asbestos

Mold for semiconductor sealing Heat insulating material for forming machine

% （Continuously at 200ﾟC and 14.7MPa〔150kg/cm2〕

）

Conventional
product A
2

Compressive creep
1.5
characteristics
This charts shows the
influence of compressive
force for a long time in the
1 heating atmosphere. Even
the conventional products
Conventional “ A” a n d“ B”,which are
product B regarded as excellent
insulation materials with
considerable heat resist-
0.5 ance, deform remarkably as
time passes.
LOSSNA-BOARD L O S S N A - B O A RD d i s p l a ys
a n outstanding stability
against pressure and
0 temperature ap-plied
100 200 300 400 500 600 700 continuously for a long
hr time.
Processing time

Compressive strength upon heating Flexural strength upon heating

600 600
MPa MPa

500 500

400 400

LOSSNA-BOARD

300 300

Conventiona
l product B
Conventiona
l productB
200 200

Conventiona
100 l productA 100
LOSSNA-BOARD
Conventiona
l productA

0 0
50 100 150 200 250 300 350 400 50 100 150 200 250 300 350 400
℃ ℃

Atmospheric temperature Atmospheric temperature

HEAT-RESISTANT MATERIAL

●High strength characteristics proof against bending

and compression.
●Excellent chemical resistance.
HEAT INSULATING MATERIAL SERIES ●Superior insulation effectiveness.

BESTHERMO ●Minimizes permanent strain.

●Economical efficiency with quality results.

SERIES
Multifunctional heat insulating material
BESTHERMO series is a distinctive, general-purpose and
multifunctional heat insulating material. In addition to the basic
insulative properties,various kinds of properties such as
“Dimensional stability” “Shock resistance” “D u r a b i l i ty”a n d
series seeking further functions. “Workability”have been developed. Consequently, you can make
your best choice from our lineup according to your application
and purpose. The greatest feature of BESTHERMO series is
“Economical efficienc y”, which offers the excellent properties at
a reasonable cost. The heat insulation material with both
“Functionality”and“Economical efficiency”BESTHERMO series
of Nikko Kasei.

Physical Properties of BESTHERMO Series

Test Items Unit BESTHERMO-F BESTHERMO-S BESTHERMO-H BESTHERMO-U
Heat resistance ℃ 300 250 300 200
Flexural strength Vertical to laminations MPa 189 159 464 197
Vertical to laminations MPa 406 319 584 335
Compressive strength
Parallel to laminations MPa 148 113 365 170

Izod impact strength J/cm 3.7 4.8 6.6 3.8

Cleavage strength kN 3.6 3.5 9.4 5.8
Water absorption ％ 0.07 0.03 0.01 0.10
Specifications for BESTHERMO
Thermal conductivity W/m・K 0.24 0.21 0.23 0.23
Max.thickness Min.thickness Material dimension
Coefficient of thermal expansion Vertical to laminations 1/℃ 5.2×10-5 6.5×10-5 4.0×10-5 4.9×10-5
F 30mm 1mm
1,000mm×1,000mm Specific gravity ― 2.0 1.8 2.0 1.9
S 30mm 1mm
1,000mm×1,200mm Flatwise withstand voltage (1 min.) kV/mm 10 10 15
H 20mm 1mm 10
1,000mm×1,250mm
U 40mm 1mm Normal state MΩ 2.5×108 2.2×108 5.0×108 1.4×108
Insulation resistance
After boiling MΩ 2.0×10 4 3.2×10 3
1.0×10 5
1.0×10

Arc resistance sec 320 250 180 155

 Non-Asbestos

MPa

700

600

Heat insulating material for tire press

500

LOSSNA-BOARD
400

300

U
200
Compressive strength upon heating
S This chart shows the compressive
strength in a heated atmosphere.
Although heat insulating materials
display good com-pressive strength,
reliability of heat insulating material
100 cannot be kept unless good com-
pressive strength can be maintained at
a high temperature.“ C o m p r e s s i v e
strength upon heating ”as well as
“Creep characteristics”is one of the
most important elements in selecting
0 high strength heat insulating materials.
25 50 100 150 200 250

℃
Atmospheric temperature

Flexural strength upon heating

The chart below shows general mechanical strengths.
BESTHERMO series display steady strength even when
irregular force（bending force）is applied at a heated
temperature of 250 ℃. Compressive creep characteristics
（Continuously at 200ﾟC and 14.7MPa〔150kg/cm 2〕
）
500
MPa %

400 2 U

H
300 1.5

200 LOSSNA-BOARD 1 S

100 F 0.5
F
H
U
S LOSSNA-BOARD
0 0
50 100 150 200 250 ℃ 100 200 300 400 500 600 700 hr
Atmospheric temperature Processing time
 HEAT-RESISTANT MATERIAL

BESTHERMO-
BESTHERMO-F, an economical version of
LOSSNA-BOARD,has excellent heat resistance and
anti-compressive creep characteristics.
F BESTHERMO- S
Among this series, BESTHERMO-S has the lowest
thermal conductivity and an excellent thermal
insula-tion performance suitable at a high
temperature. It also has excellent high frequency
properties .
LOSSNA-BOARD
Heat resistance performance

Workability Strength and creep

characteristics

Insulation Thermal insulation

performance performance

Heat resistance performance Heat resistance performance

Strength and creep Strength and creep

Workability characteristics Workability characteristics

Insulation Thermal insulation Insulation Thermal insulation

performance performance performance performance
Features Low thermal conductivity.
Excellent arc resistance and tracking resistance.
Low water absorption capacity and low Features
hygroscope properties. Thermal insulation with considerably low
thermal conductivity.
Passes the automotive material combustion test Insulation with excellent dielectric
UL-94V-0. characteristic.
Excellent heat shock resistance. Flexible workability.
Application Heat insulating material for high-temperature
Application Heat resistant material for high
forming machines. temperature and intermediate pressure
Heat insulating material with arc resistance, high forming machines.
frequency insulation properties and dielectric
characteristic.
Automotive heat insulation.
BESTHERMO-F
Rubber vulcanization press molds

BESTHERMO-S
Mold for IC sealing
 Non-Asbestos

BESTHERMO-
BESTHERMO-H is the most durable in this series
H
of strong, low thermal conductive and heat resistant
BESTHERMO-
The most economical material of this series,
U
which has every physical property as heat insulating
applica-tion like low thermal conductivity. We are
ma-terials. Its best application is heat insulation
material and structural material in high temperature sure that remarkable effect can be achieved even
areas. under cost restrictions.

Heat resistance performance Heat resistance performance

Strength and creep Strength and creep

Workability characteristics Workability characteristics

Insulation Thermal insulation Insulation Thermal insulation

performance performance performance performance

Features Thermal insulation with considerably low

thermal conductivity.
Low creep characteristics suitable for long-
Features Outstanding strength withstanding“Bending” termuse.
and“Compression”. Reasonably priced to meet your
Low creep characteristics suitable for long- industries' expectations.
term use. Excellent workability available in wide
Superior izod impact strength. range.
High voltage insulation.
Excellent dimensional stability. Heat insulation material for intermediate
Application temperature and intermediate-pressure
Flexible workability. forming machines.
Application Heat insulation material for high temperature. Heat insulation material for restricted
Insulation material for high-precision forming budgets.
machine. Example of application of
Structural material with strength at a high BESTHERMO-U.
temperature.

Machined example of
BESTHERMO-H
HEAT-RESISTANT MATERIAL

●Ultra-light heat-resistant insulating material.

●Excellent heat retaining properties with low
thermal conductivity.
LIGHTWEIGHT MATERIAL SERIES ●Outstandingstrengthwithstanding“Bending”,

KALLYTE
“Compression ”and“Izod impact tests”.

Lightweight and heat insulation produce profitability. Nikko

SERIES
Kasei has been paying attention to economics brought on by
lightweight materials. It has been our subject of research for a
long time. We manufacture lightweight heat-resistant board
without sacrificing heat retaining properties, insulation or heat
Lightweight and heat-resistant insulation resistance.
material seeking“P r o f i t a b i l i ty” t h r o u g h KALLYTE, is half the weight of conventional laminated
“Lightweight” materials. Although it has the heat resistance, insulation
performance and durability equal to other laminated materials,
we have developed a lightweight energy efficient heat retaining
insulation therefore, reducing kinetic energy cost. Having been
highly evaluated for its lightweightand insulating properties,
KALLYTE EGL is standard material on“Nozomi”and any other
next generation Super-express trains in Japan. KALLYTE IGL is
expected to be widely used for side panel heat-retaining
material for diecasting and insulation material for machine tools
because of its excellent heat-resistance, high-strength heat-
retaining/insulating and lightweight properties.

Physical Properties of KALLYTE Series

Test Items Unit IGL-14 EGL-10 EGL-14
Heat resistance ℃ 400 180 180
Flexural strength Vertical to laminations MPa 128 196 335
Vertical to laminations MPa 228 223 294
Compressive strength
Parallel to laminations MPa 80 174 235
KALLYTE floating on water
Izod impact strength J/cm 4.6 5.0 5.3
Cleavage strength kN 2.6 8.3 7.8
Specifications for KALLYTE series
Water absorption ％ 0.09 0.08 0.05
Max.thickness Min.thickness Material dimension
Thermal conductivity W/m・K 0.09 0.08 0.09
50mm 3mm 1,000mm×1,000mm Specific gravity ― 1.4 1.0 1.4
Flatwise withstand voltage (1 min.) kV/mm 10 10 15

Normal state MΩ 1.0×107 1.0×107 2.5×107

Insulation resistance
After boiling MΩ 2.0×10 3
1.0×10 3
2.5×103
Arc resistance sec 250 90 123
 Non-Asbestos

Cylindrical heat insulator for forming machine.

●General purpose with flexible workability

●Superior heat insulation
●Excellent durabilityathightemperatures
LIGHTWEIGHT MATERIAL SERIES ●Ultra-light board

KALHON-L
General-purpose heat-resistant material
Demands for heat insulation and heat retention are being
diversified. To meet such demands, heat retaining and
insulation materials must have flexibility as industrial materials.
with flexible workability KALHON-L of Nikko Kasei has achieved this from plate structure
to cylindrical shapes, plus excellent workability with density
control, integral construction and lamination. KALHON-L was
also developed as heat-resistant, heat-retaining and heat-
insulation material with high performance.
In addition to its workability, KALHON-L has low thermal
conductivity 0.077W/m・K and durability at a temperature of
500℃, KALHON-H is being applied in many areas such as“mold
heat retaining material”“ , heat insulation material for high-
temperature facilities”“ , heat-retaining plates in heating
elements ”, and“material for dew condensation prevention”,etc.

Physical Properties of KALHON-L

Test Items Unit
Heat resistance ℃ 500
Flexural strength Vertical to laminations MPa 8.9
Specifications for KALHON-L Izod impact strength J/cm 1.2
Thickness Material dimension
Water absorption ％ 6.3
Thermal conductivity W/m・K 0.077
10mm
20mm 1,000mm×1,000mm Vertical to laminations 1/℃
Coefficient of thermal expansion 7.4×10-5
30mm Parallel to laminations 1/℃ 3.1×10-6
Specific gravity ― 0.5
Arc resistance sec 250
HEAT-RESISTANT MATERIAL

HEAT-RESISTANT MATERIAL SERIES

T-MOLD
●Heat resistance equivalent to ceramics.
●Excellent insulation properties
●Low coefficient of linear expansion.
New forming material with excellent ●Flexible and strong.
heat resistance, dimensional stability,
insulation property and arc resistance. “T - M O LD”is a thermosetting super heat-resistant forming
material developed by concentrating the advanced electrical
insulation technology and forming technology of Nikko Kasei.“ T-
M O LD”is quite a new industrial material that has excellent
workability like that of organic resins and its heat resistance is
equivalent to that of ceramics.“T-MOLD”is expected to be used in
various fields such as“heat-resistance articles instead of metal or
ceramics”“arc
, chute”“b, reaker”“, welded components”“ , heavy
electrical components in microwave ovens”, and“c o m p o n e n t s
related to semiconductor devices”,etc.

Physical Properties of T-MOLD

Test Items Unit MS-112 MP-114 MI-118
Specific gravity − 1.90 1.90 1.90
Water absorption % 0.04 0.04 0.12
Thermal deformation temperature ℃ 300＜ 300＜ 300＜
Coefficient of linear expansion. 1/℃ 4.0×10-5 2.0×10-5 1.5×10-5
Thermal conductivity W/m・K 0.66 0.52 0.56
Coefficient of contraction upon forming % 0.2 0.2 0.05
Insulation resistance Normal state Ω 4.0×1015 2.0×1014 1.0×1015
Insulation resistance After boiling Ω 5.0×1013 6.0×1012 2.0×1013
Withstand voltage kV/mm 12 12 12
Arc resistance SEC 310 242 85
Tracking resistance V(CTI) 600＜ 200 200
Dielectric constant (MHz) − 4.0 4.6 4.6
Dielectric loss tangent (MHz) − 0.002 0.015 0.015
Flexural strength MPa 60 170 120
Bend elastic constant MPa 9,800 17,700 14,700
Tensile strength MPa 40 60 60
Izod impact strength J/m 0.39 0.85 0.36
Flammability − Equivalent to V-0
 Non-Asbestos

300℃ 800℃ 1000℃

The outstanding heat resistance

of T-MOLD
Resin-based heat-resistant materials
are generally used in various fields
MS-112 because of their manageability and
low cost. These ma-terials, however,
have not reached to satis-factory
level in terms of heat-resistant abili-
ty. During long-term continuous heat
resist-ance testing, the upper limit
temperature of most resin-based
heat-resistant materials was
Silicon resin approximately 200℃ to 300℃ at the
high end. T-MOLD MS-112 shows
excellent heat-resistance during
long-term testing at 300℃. Though it
is hard to tell the differ-ence among
t he m a t e r i a ls at 3 00℃ , T -
MOLD,retaining its original form,
clearly displays heat-resistance at
Phenol resin 800 to 1,000℃.

MS series
BASIC SERIES ●Heat-resistance（300 to 500℃）.
Three types of BASIC series display every ●Stabilized structure even at a high temperature of 1,000℃.
feature effectively.
●Contains no heavy metal nor asbestos for environment preservation.
Use suitable one as necessary.
●Weather resistance against ultraviolet rays, etc.
●Low dielectric constant, low dielectric loss tangent and many other excellent electrical
characteristics.
●Formed by injection, transfer and compression.

MP series
●Heat-resistance（200 to 300℃） .
●Excellent stability against every kind of solvent.
●Excellent electrical insulation.

OPTION ●Formed by injection, transfer and compression.

Custom-made T-MOLD, is available based on your

MI series
ratio factor requirements. Through integrated ●Heat-resistance（200 to 300℃） .
production from constituent blending and forming, ●Excellent radiation resistance.
we are willing to meet your any special request, e.g.,
●Superior dimensional stability when heated.
high conductivity, minimization of abrasion, etc. For
details, please feel free to contact us. ●Chemical resistance against acid, alkali, etc.
●Formed by transfer and compression.
HEAT-RESISTANT MATERIAL

HEAT-RESISTANT MATERIAL SERIES

MICALEX
Advanced-technology material.
●Excellent electrical insulation.
●Excellent high frequency properties.
Machineable ceramics made from ●Heat, pressure and arc resistance.
natural mica, artificial mica and ●Superior workability.
special glass with hot forming. ●Excellent dimensional accuracy and form-stability.

Today, heat-resistance materials play an important role in

semiconductor which is the core of our computer world.
MICALEX is on the cutting edge of heat-resistance material
technology by minimizing the generation of gas caused by the
corrosion of glass material at a temperature of 700℃.With its
excellent accuracy and stability, MICALEX is behind the scenes
supporting the microchip industry.

Physical Properties of MICALEX

M-25 M-31
Test Items Unit
(Artificial mica) (Natural mica)
Heat resistance ℃ 700 400
Flexural strength MPa 73 108
Compressive strength MPa 216 226
Tensile strength MPa 148 115
Izod impact strength J/cm 0.4 0.6
Water absorption ％ 0.002 0.005
Specifications for MICALEX
Thermal conductivity W/m・K 1.42 1.24
Max.thickness Min.thickness Material dimension
Coefficient of thermal expansion (Vertical to laminations) 1/℃ 7.0×10-6 9.0×10-6
M-31 300×300mm
35mm 3.2mm Specific gravity ― 2.5 2.6
(Natural mica) 280×500mm
Withstand voltage (1 min.) kV/mm 10 15
M-25 35mm 3.2mm 290×340mm
(Artificialmica) Volume resistivity J・Ω・cm 1.9×1014 2.0×1014
Insulation resistance MΩ 2.2×10 5
2.5×105
Arc resistance sec 420 246
 Non-Asbestos

Example of application in a heater Machined example of MICALEX

Ω （20℃・95％RH）

1012

1011

1010

Insulation resistance in
high humidity.
109
The chart on the left shows the
M-25 transition of insulation
resistance as time passes in
108 95％humidity.
MICALEX has high insulation
performance even in high
0 humidity and displays excellent
5 10 15 20 water and oil resistance.
M-31
Processing time hr
%×10 -3

M-25
A
6
M-31
A M-25
5
M-31 B Thermal expansion curve
B
4 Thermal expansion is mini-
mized, strain and distortion are
prevented well with MICALEX.
3 It can maintain excellent di-
mensional accuracy even at
2 high temperatures.
A: Horizontal
B: Vertical MICALEX displays a special
1 ability as a component of de-
vices related to semiconductors
0 and heat-resistant materials for
100 200 300 400 500 600 700 heaters.
℃
Temperature

0.1
M-25
0

-0.1 Change in weight upon heating

Upon heating matter, organic
-0.2 substances are burned and they
loose weight.
-0.3 MICALEX is composed of an
inorganic substance. M-31 is
-0.4 M-31 made from natural mica and,
therefore, it shows greater
-0.5 changes of weight compared
100 200 300 400 500 600 700 with M-25.
℃
Temperature
HEAT-RESISTANT MATERIAL

What is heat insulating materials？

“Heat insulating material”means a material to insulate heat literally. Utilization of heat insulating
material is spreading over various fields from ultra-low temperature applications（-253℃）of using
liquid hydrogen for fuel to high temperature applications （above 2,000℃） that of nuclear reactors.
Why do such various fields demand heat insulating materials？ It is because the safety and
productivity improved by the heat insulating materials are necessary for today’ s industry. It is
widely recognized that remarkable economic results, improvement of product accuracy as well as
productivity, reduction of energy cost on the production line, comfortable working environment
and minimization of deformation which are all attributed to heat insulation. An increasing number
of industries are expecting more effective heat insulating materials and are taking a great interest
in them.

1Types of heat insulating materials Figure-1

There are three types of heat insulating materials, i.e., Organic

Thermoplastic forming material,
heat insulatiog
solid, liquid and gas, and each of them has unique material animalfiber,vegetable fiber
characteristics. Solid heat insulating materials have
various types of products that have been developed
based on various materials. As shown in Figure-1, these Vitreous material Glass fiber(glass wool),
products are classified as“organic material”“i
, norganic foamed glass
material”and“combined material”composed of organic Asbestos,rock wool,mica,
and inorganic materials. Generally ,“ o r g a n ic”h e a t - Mineral material perlite,calcium silicate
Inorganic
insulating materials have an advantage in workability and heat insulating
cost, but have problems in durability at high material Diatomaceous earth,clay,
temperatures. On the other hand,“ i n o r g a n ic”h e a t Clayey material silica glass,alumina,
insulating material is excellent in heat-resistance and magnesia,zirconid
strength, but it tends to be costly.
Nikko Kasei has been conducting diversified and Carbonaceous material Carbon fiber
multilateral researches on heat-insulating materials for a
long time and pushing forward the development of more Organic material Glass fiber+thermosetting coupled and combined plate
powerful and effective non-asbestos heating insulating Inorganic material
Combined material
Glass fiber+inorganic coupled and combined plate
materials. Mica powder+thermosetting coupled and combined plate

2 Selection and processing of heat insulating materials

In general, materials are examined by comparing physical characteristics shown in catalogs issued by manufacturers.
However, measuring methods of physical characteristics are not standard and, therefore, the values stated in the catalogs
cannot be directly compared in many cases. For example, a value of thermal conductivity varies greatly depending on the
measurement method.To avoid troubles in selecting materials, it is highly recommended to consult with manufacturers
and processors over and over again.
In most cases, heat-insulating materials are made into flat plate and therefore, cutting, drilling, milling, tapping and
polishing works are required for practical use.The dust generated in the process of such works sometimes causes
environmental problems. Though Nikko’ s products do not contain any harmful asbestos, it is advisable to ask material
processors to handle the processing works. The processors authorized by us control the dust and finish up the work with
precise craftsmanship. For further information on authorized processors, please contact our dealers or our head office
directly.

Notes on handling
Notes on transportation Notes on storage
1.For heavy materials, use a suitable transportation 1.Select a place with low humidity that is not exposed to the sunlight.
equipment and handle with care. 2.Stack the products on a flat bed. If you lean them against walls,
etc..,support or take necessary measures to prevent them from
falling.
Notes on processing
1.Install a local ventilator in places where fine chips may
be produced upon processing.
Notes on scrapping
2.Put on any protector to protect yourself from fine 1.Take necessary measures to prevent fine chips from dispersing.
chips dispersed upon processing. 2.For disposal of cut pieces and fine chips, follow your governmental
When you complete your work or leave your working /local rules and regulations and request a qualified industrial waste
area, remove the fine chips from your protector and treatment contractor.
clothes, and be sure to gargle.
 Non-Asbestos

Heat-resistant
board of Nikko Kasei meets the
diversified needs as follows:
Example●Super engineering plastics
●Forming machine for thermosetting resin
When stable and multipurpose
heat-resistant material is required. ●IC molds LOSSNA-BOARD
●Induction heaters, etc,

Example●High-temperature and high-pressure forming machines

When low strain at high tempera- ●IC molds ●Rubber vulcanization press molds
tures and heat-resistant material
equivalent to LOSSNA is required.
●Heat insulating board for vibration-proofing rubber BESTHERMO-F
●Components of high-frequency heating devices, etc.

When heat-resistant insulation Example●IC molds

●Heat insulation for a local unit and a loading unit
materials having high-strength and
chemical resistance at high temper- ●Oil seals ●Vibration-proof rubber BESTHERMO-H
atures are required. ●High-precision components, etc.

Example●Tire presses
When low cost and durable heat ●Rubber sheet presses
insulating board is required. ●Rubber vulcanization press molds, etc. BESTHERMO-U

When workable, shock-absorbing, Example●Support plate for planar heating elements

●Heat retention of molds and temperature controllers
high-performance, heat-resistant
and heat-retaining material is ●Heat insulating material for high temperatures KALHON-L
required.

Example●Vehicle controllers
●Component of transformers,
When lightweight and high-strength
insulation material is required. heavy electrical machinery and KALLYTE EGL
components, etc.

Example●Vehicle parts
When lightweight and high-performance
●High-performance heat-resistant
heat-resistant insulation material is
required.
and energy saving facilities, etc. KALLYTE IGL

Example●Microwave components such as

components for microwave ovens
When heat resistance and durability
at a high temperature is required. ●Arc chute●Breakers●Welded components T-MOLD
●Heavy electrical machinery and components, etc.

When machinable ceramics that Example●Semiconductor manufacturing equipment

●Heater components, etc.
contain excellent electrical charac-
teristics and dimensional stability MICALEX
are required.