Professional Documents
Culture Documents
Loop-Am3440 Series Tdmoe Card User'S Manual
Loop-Am3440 Series Tdmoe Card User'S Manual
TDMoE Card
User’s Manual
ii
List of Tables
Table 2-1 Ethernet Function Table........................................................................................................... 8
Table 2-2 RJ45 for Ethernet Port............................................................................................................. 8
Table 3-1 Alarm Default – for System and Line ....................................................................................... 9
Table 3-2 LED Indication for Main Unit.................................................................................................... 9
Table 6-1 15-Min/1-Hour/7 Days Perf Report ........................................................................................ 16
Table 6-2 24-Hour Perf. Display ............................................................................................................ 17
Table 6-3 Timeslot Assignment Display................................................................................................. 22
Table 7-1 Loopback Setup..................................................................................................................... 28
Table 7-2 Advanced Setup..................................................................................................................... 28
Table 7-3 Priority Mode Setup ............................................................................................................... 29
Table 7-4 Fixed Priority Setup ............................................................................................................... 30
Table 7-5 Vlan CoS Priority Setup......................................................................................................... 30
Table 7-6 ToS Field Priority Setup ......................................................................................................... 31
Table 7-7 Flow Control........................................................................................................................... 32
Table 7-8 Scheduling Algorithm............................................................................................................. 33
Table 7-9 WRR Weight Setup................................................................................................................ 33
Table 7-10 Rate Control Setup .............................................................................................................. 34
Table 7-11 Ethernet Port Setup ............................................................................................................. 35
Table 7-12 Auto Negotiation and Duplex ............................................................................................... 35
Table 7-13 Ethernet Switch Setup ......................................................................................................... 36
Table 7-14 Add Ethernet MAC Address................................................................................................. 36
Table 7-15 Delete Ethernet MAC Table ................................................................................................. 36
Table 7-16 Link Aggregation Setup ....................................................................................................... 38
Table 7-17 RSTP Configuration............................................................................................................. 41
Table 7-18 ETH1~4 Configuration ......................................................................................................... 41
Table 7-19 RSTP and RSTP Port Setup Parameters............................................................................ 41
Table 7-20 Tributary Mode Setup .......................................................................................................... 42
Table 7-21 Tributary Configuration Setup (Trib1, Trib2, Trib 3, Trib4) ................................................... 43
Table 7-22 Bundle Allocation Setup....................................................................................................... 44
Table 7-23 Time Slot Assignment Setup................................................................................................ 44
Table 7-24 Bundle IP Setup................................................................................................................... 45
Table 7-25 Time Slot IP Assignment...................................................................................................... 47
Table 7-26 Alarm Setup ......................................................................................................................... 49
Table 7-27 Download Firmware............................................................................................................. 51
iii
GB At the end of the product's useful life, please dispose of it at appropriate collection points
provided in your country
F Une fois le produit en fin devie, veuillez le déposer dans un point de recyclage approprié.
ES Para preservar el medio ambiente, al final dela vida útil de su producto, depositelo en los
laguares destinado aello de acuerdo con la legislación vigente.
P No final de vida útil do producto, por favor coloque no ponto de recolha apropriado.
I Onde tutelare l'ambiente, non buttate l'apparecchio trai i normali rifiuti al termine della
sua vita utile, ma portatelo presso i punti do taccolta specifici per questi rifiuti previsti
dalla normativa vigente.
NL Wij raden u aan het apparant aan het einde van zijn nuttige levensduur, niet bij hey
gewone huisafval te deponeren, maar op de dearvoor bestemde adressen.
DK Når produktet er udtjent, bor det børtskaffes via de sæ rlige indsamlingssteder i landet.
N Ved slutten av produktets levetid bør det avhendes på en kommunal miljøstasjon eller
leveres til en elektroforhandler.
PL Gdy produkt nie nadaje sie juz do dalszego uzytku, nalezy zostawic go w jednym ze
specjalnych punktów zajmujacych sie zbiórka zuzytych producktów w wybranych
miejscach na terenie kraju.
SLO Ko se izdelku izteče življenska doba, ga odnesite na ustrezno zbirno mesto oziroma ga
odvrzite v skladu z veljavnimi predpisi.
PRC 當產品使用壽命結束,請在你的國家所提供的適當地點做好回收處理
1. PRODUCTION DESCRIPTION
1.1. Description
Loop Telecom’s TDMoE plug-in card is designed for the Loop-AM3440 series. TDMoE card is used to
transport TDM traffic over IP network, in addition to Ethernet traffic. As the communications network
migrates from TDM to IP, the TDMoE card provides a flexible and cost effective choice for the transport
of legacy TDM signals.
It provides four Ethernet ports with no limitation for WAN or LAN port assignment: two aggregate ports
with GbE combo interface and two tributary ports with 10/100/1000 BaseT Ethernet interfaces. The
TDMoE card support point-to-point and point-to-multi-point voice and date application.
For transport of TDM signals E1, T1, Jitter and Wander adheres to G.823 Traffic and G.823
Synchronous.
Over the past few years, packet-switched network (PSN) coverage has become ubiquitous, stimulating
a desire for convergence of all communications services over a unified infrastructure. This has brought
into prominence the concept of a pseudowire (PW). A pseudowire emulates a native service (e.g., ATM,
frame-relay, Ethernet or TDM) but utilizes transport over a PSN.
TDM over Ethernet, or TDMoEthernet, is a TDM PW technology that makes it possible to provision E1,
T1, and serial data services across IP, MPLS or layer 2 Ethernet networks. The services are provided in
a manner transparent to all protocols and signaling. TDMoEthernet enables service providers to
migrate to next generation networks while continuing to provide all their revenue-generating legacy
voice and data services, and without fork-lift upgrades of end-user equipment. TDMoEthernet also
benefits data carriers by enabling them to offer lucrative leased-line and voice services on their
packet-switched infrastructures. It enables enterprises to run voice and video over the same
IP/Ethernet-based network that is currently used to run only LAN traffic, thereby minimizing network
maintenance and operating costs.
Unlike other traffic types that can be carried over pseudowires, TDM is a real-time bit stream, leading to
TDMoEthernet having unique characteristics. In addition, conventional TDM networks have numerous
special features, in particular those required in order to carry voice-grade telephony channels. These
features imply signaling systems that support a wide range of telephony features, a rich standardization
literature, and well-developed OAM mechanisms. All of these factors must be taken into account when
emulating TDM over PSNs.
One critical issue in implementing TDM PWs is clock recovery. In native TDM networks the physical
layer carries highly accurate timing information along with the TDM data, but when emulating TDM over
PSNs this synchronization is absent. TDM timing standards can be exacting, and conformance with
these requires innovative mechanisms to adaptively reproduce the TDM timing. TDMoEthernet ensures
that recovered clock jitter and wander levels conform to ITU-T G.823/824, even for networks that
introduce high packet delay variation and packet loss.
TDMoEthernet complements VoIP in those cases where VoIP is not applicable, and in those cases
where VoIP price/performance is not optimal. Most importantly, TDMoEthernet can provide higher voice
quality with much lower latency than VoIP. And unlike VoIP, TDMoEthernet can support all applications
that run over E1/T1 circuits, not just voice. TDMoEthernet can provide traditional leased-line services
over IP, and is transparent to protocols and signaling. Because TDMoEthernet provides an evolutionary
(as opposed to revolutionary approach), investment protection is maximized.
Sophisticated TDM clock recovery mechanisms, one for each E1/T1 interface, allow end-to-end TDM
clock synchronization, despite packet delay variation of IP/MPLS/Ethernet network.
The clock recovery mechanisms provide both fast frequency acquisition and highly accurate phase
tracking:
• Jitter and wander of the recovered clock are maintained at levels that conform to G.823/G.824 traffic or
synchronization interfaces. For adaptive clock recovery, the recovered clock performance depends on
packet network characteristics.
• Short-term frequency accuracy (1 second) is better than 16 ppb (using PPB reference), or 100 ppb
(using PPM reference)
• Capture range is ±90 ppm
• Internal synthesizer resolution of 0.5 ppb
• High resilience to the packet loss and mis-ordering, up to 5% of packet loss/misordering without
degradation of clock recovery performance
• Robust to sudden significant constant delay changes
• Automatic transition to hold-over is performed upon link-break events
1.2.2. Bundles
A bundle is defined as a stream of bits that have originated from the same physical interface. They are
transmitted from a TDMoEthernet source device to a TDMoEthernet destination device. For example,
bundles may comprise any number of 64 Kbps timeslots originating from a single E1, T1 or an entire
E3/DS3. Bundles are single direction streams, frequently coupled with bundles in the opposite direction
to enable full duplex communications. More than one bundle can be transmitted between two
TDMoEthernet devices. For E1/T1, the chip provides internal bundle cross-connect functionality, with
DS0 resolution. You can establish a cross-connect between different E1/T1 interfaces of TDMoEthernet
device, or within one interface of TDMoEthernet. Only one bundle can be defined for E3/DS3.
Up to 64 bundles are supported. Each bundle in the TDMoEthernet is transmitted using one of the
following payload type methods: AAL1, CESoPSN or SAToP. Each TDM over Ethernet
bundle/connection may be assigned to one of the payload types. For E1/T1, the chip provides internal
bundle cross-connect functionality, wit DS0 resolution. You can establish a cross-connect between
different E1/T1 interfaces of the TDMoEthernet device, or within one interface of the device.
1.3. Application
TDMoE plug-in card in AM3440 series is to transport TDM traffic (voice signals/E1/ T1/ DTEs/
Ethernet) into IP Traffic.
Remote Management
AM3440-A/B/C AM3440-A/B/C
TDMoE TDMoE
Master
TDMoE and QE1/T1 Master
1+1 protection
Slave
QE1/T1 Slave
QE1/T1
Leased line
Backup line
1.4. Specifications
Optical SFP Module Characteristic for Gigabit Ethernet(GbE)
SFP Optical Direction Data Rate Wavelength(nm) Connector Distance
Module
MTAFW dual uni-directional fiber 1.25G 850 LC without M 550 m
MTAFD dual uni-directional fiber 1.25G 850 LC with DDM 550 M
MTBTD dual uni-directional fiber 1.25G 1310 LC with DDM 2 km
MTBTW dual uni-directional fiber 1.25G 1310 LC without DDM 2 km
PTB2W dual uni-directional fiber 1.25G 1310 LC without DDM 20 km
PTB4W dual uni-directional fiber 1.25G 1310 LC without DDM 40 km
PTC5W dual uni-directional fiber 1.25G 1550 LC without DDM 50 km
PTC6W dual uni-directional fiber 1.25G 1550 LC without DDM 60 km
PTC8W dual uni-directional fiber 1.25G 1550 LC without DDM 80 km
PTC9W dual uni-directional fiber 1.25G 1550 LC without DDM 90 km
PTCVW dual uni-directional fiber 1.25G 1550 LC without DDM 110 km
PTCXW dual uni-directional fiber 1.25G 1550 LC without DDM 120 km
PTB1D dual uni-directional fiber 1.25G 1310 LC with DDM 10 km
PTB3D dual uni-directional fiber 1.25G 1310 LC with DDM 30 km
PTB4D dual uni-directional fiber 1.25G 1310 LC with DDM 40 km
PTC5D dual uni-directional fiber 1.25G 1550 LC with DDM 50 km
PTC6D dual uni-directional fiber 1.25G 1550 LC with DDM 60 km
PTC8D dual uni-directional fiber 1.25G 1550 LC with DDM 80 km
PTC9D dual uni-directional fiber 1.25G 1550 LC with DDM 90 km
PTCVD dual uni-directional fiber 1.25G 1550 LC with DDM 110 km
PTCXD dual uni-directional fiber 1.25G 1550 LC with DDM 120 km
PKB1W dual uni-directional fiber 622Mbps~1. 1310 LC with DDM 10 km
25G
Ethernet Function
Basic Features MDI/MDIX for 10/100/1000M BaseT auto-sensing
Ping function contained ARP
Per port, programmable MAC hardware address learn limiting (max. MAC table
8192 (8k) entry)
Packet Delay Variation:
- Unframed T1: Up to 340 ms
- Framed T1: Up to 256 ms
- E1:up to 256 ms
- Framed T1 with CAS: Up to 192 ms
Packet Transparency Packet transparency support for all types of packet types including IEEE 802.1q
VLAN and 802.1ad (Q-in-Q)
QoS User configurable 802.1p CoS, ToS in out going IP frame
Traffic Control Ingress packet Rate limiting buckets per port for ethernet port
Supporting Rate-based and Priority-based rate limiting for LAN port
Granularity:
a. From 64 Kbps to 1 Mbps in increments of 64 Kbps
b. From 1 Mbps to 100 Mbps in increments of 1 Mbps
c. From 100 Mbps to 1000 Mbps in increments of 10Mbps
Pause frame issued when the traffic exceeding the limited rate before packet
dropped following IEEE802.3X
Standard Compliance
IETF TDMoIP (RFC5087), SAToP (RFC4553), CESoPSN (RFC5086)
IEEE 802.1q, 802.1p, 802.1d, 802.3, 802.3u, 802.3x, 802.3z, 802.1s, 802.1w
2. INSTALLATION
The TDMoEthernet card can be plugged into any of the available full size slots in the AM3440 chassis.
The front panel is shown in Figure 2-1. Pin definition and pin connection of the console port are listed in
the following tables.
NOTE: If you see protruding screw heads on the slot 3 of CHB or slot 5 of CHC as shown in the figure
below, do not plug the TDMoE card into these two locations because the card might be
damaged.
3. OPERATION
3.1. Alarm
When the TDMoE card reports an alarm condition, such as loss of synchronization, the ALARM will
cause the LED on the front panel to light. Each alarm can be individually enabled or disabled. The
alarm types are listed in the table as below.
3.2. LED
The front panel of the TDMoE has multi-color LEDs for operation and error indications. The indication is
either off, steady on, or flickering. The following table lists each LED and its color and the meaning it
represents. Note that when powering up and self test is in progress, the unit front panel LEDs are also
used to indicate fault conditions.
4. MAINTENANCE
Backplane loopback is illustrated in Figure 4-1. The incoming signal is immediately looped back to
Backplane after entering FPGA without going through FPGA process. The outgoing signal then passes
TDMoE Chipset and Ethernet Switch and arrives in the remote physical link.
Payload loopback is illustrated in Figure 4-1. The signal is looped back to TDMoE Chipset from FPGA
after it goes through Ethernet Switch and TDMoE Chipset. The signal then passes Ethernet Switch and
arrives at the remote physical link.
Local loopback is illustrated in Figure 4-1. The incoming signal is looped back to Backplane from FPGA.
The outgoing signal then passes TDMoE Chipset and Ethernet Switch and arrives at the remote
physical link.
Line loopback is illustrated in Figure 4-1. The signal is immediately looped back to Ethernet Switch after
entering FPGA without going through FPGA process. The signal then arrives at the remote physical
link.
10
5. TERMINAL OPERATION
The TDMoE provides comprehensive report and configuration capability through the console port. By
using single-character commands and arrow keys, the TDMoE can be configured and monitored
through the use of a VT-100 terminal. The single-character commands are not case sensitive, except
for when using a password.
The Controller Menu screen will appear after you login. To Log off, simply press the F button.
Note: The AM3440 chassis type will appear in the top left-hand corner of the screen.
(See highlighting in the sample screen below.)
[DISPLAY] [SETUP]
C -> System Configuration
B -> Clock source Configuration
Q -> Alarm Queue Summary
I -> Information Summary
R -> Redundant CTRL Information
P -> Performance Report
[LOG] [MISC]
U -> Choose a Slot
F -> Log Off [SETUP],[MISC] Menu
O -> Log On [SETUP],[MISC] Menu
After logging on, a full Controller Menu will appear as shown below. Press U from the full Controller
Menu to choose the slot that your TDMoE card is in. Key in the slot number. Press the Enter key.
[DISPLAY] [SETUP]
C -> System Configuration S -> System Setup
B -> Clock source Configuration M -> System Alarm Setup
Q -> Alarm Queue Summary W -> Firmware Transfer
I -> Information Summary V -> Store/Retrieve Configuration
R -> Redundant CTRL Information K -> Clock source Setup
P -> Performance Report T -> Bit Error Rate Test
[LOG] [MISC]
U -> Choose a Slot A -> Alarm Cut Off
F -> Log Off [SETUP],[MISC] Menu X -> Clear Alarm Queue
O -> Log On [SETUP],[MISC] Menu Y -> Controller Return to Default
Z -> Controller Reset
11
After choosing the appropriate slot, the Port Menu will appear for the TDMoE card. You will see
DISPLAY and LOG sections on the main menu.
SLOT 2 TDMoE === Port Menu === 11:30:59 05/24/2010
[DISPLAY] [SETUP]
1 -> 15-Min/1-Hr/7 Days Perf.Report
2 -> 15-Min/1-Day Perf.Report
C -> System Configuration
J -> All Time Slot Assignment
H -> Time Slot IP Configuration
N -> Status & Statistics
A -> Alarm History
[LOG] [MISC]
U -> Choose Other Slot
F -> Log Off [SETUP],[MISC] Menu
O -> Log On [SETUP],[MISC] Menu
E -> Return to Controller Main Menu
Press O to log on, and you will see the SETUP and MISC sections.
SLOT 2 TDMoE === Port Menu === 11:30:59 05/24/2010
[DISPLAY] [SETUP]
1 -> 15-Min/1-Hr/7 Days Perf.Report L -> Loopback Setup
2 -> 15-Min/1-Day Perf.Report S -> System Setup
C -> System Configuration T -> Time Slot IP Assignment
J -> All Time Slot Assignment M -> Alarm Setup
H -> Time Slot IP Configuration R -> Clear Alarm History
N -> Status & Statistics X -> Clear Performance Data
A -> Alarm History W -> Firmware Upgrade
[LOG] [MISC]
U -> Choose Other Slot Y -> Unit Load Default
F -> Log Off [SETUP],[MISC] Menu Z -> Card Reset
O -> Log On [SETUP],[MISC] Menu
E -> Return to Controller Main Menu
Note:
1. OSC Ver: There are two kinds of hardware version - TCXO (TCXO =1 PPm) & OCXO (OCXO= 10
PPb).
When a VT-100 terminal is connected to the CONSOLE port of the TDMoE, a main menu is displayed
on the VT-100 monitor. The main menu consists of four groups of commands, DISPLAY, LOG, SETUP,
and MISC. All commands are detailed in the VT-100 Menu Tree illustrations below.
12
[DISPLAY] [SETUP]
[LOG]
[MISC]
U > Choose Other Slot
F > Log Off [SETUP],[MISC] Menu Y > Unit Load Default
O > Log On [SETUP],[MISC] Menu
13
14
15
6. SYSTEM STATUS
This chapter shows the DISPLAY section on VT100 Main Menu. This is where you can get the
information about current system status. You can also check your settings here after you do the setup
configuration in the SETUP section.
Note: The screen for System Configuration Display should correspond to the System Setup page; Time
Slot IP Configuration should correspond to Time Slot IP Assignment.
¾ Command Path Main Menu > (1) 15-Min/1-Hr/7 Days Perf. Report
¾ Description Display the 15-Min/1-Hr/7 Days performance report
Then you will see the 15-Min/1-Hour/7 Days Perf. Report for the port and bundle you select listed as
below:
SLOT 1 TDMoE === 15-Min/1-Hr/7 Days Perf.Report === 13:42:29 12/29/2010
Trib 1 Bundle 0
-- Valid Seconds in Current 15-Min Interval: 0 seconds
Rx-Lost J-UR J-OR
Current 15-Min Interval : 0 0 0
1st Nearest 15-Min Interval: ----- ----- -----
2nd Nearest 15-Min Interval: ----- ----- -----
3rd Nearest 15-Min Interval: ----- ----- -----
4th Nearest 15-Min Interval: ----- ----- -----
16
Then you will see the 15-Min/1-Day Perf. Report for the port, bundle, and parameter you select listed as
below:
SLOT 1 TDMoE === 15-Min/1-Day Perf.Report === 13:44:28 12/29/2010
Trib 1 Bundle 0 Rx-Lost
-- Valid Seconds in Current 15-Min Interval: 0 seconds
-- Valid 15-Min Intervals in Current 24-Hour Interval: 0
Rx-Lost J-UR J-OR
Current 15-Min Interval : 0 0 0
Current 24-Hour Interval : 3 0 0
17
¾ Command Path Main Menu > (C) System Configuration > (A) Miscellaneous
Display
¾ Description Display the active bundle time, alarm filter, and delay switch
time
¾ Command Path Main Menu > (C) System Configuration > (C) QoS Display
¾ Description There are three options you can select from the QoS Display:
(A) Class of Service (B) Transmission Scheduling (C) Rate
Control Display.
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (A)
Class of Service
¾ Description There are four options you can select from the Class of
Service: (A) Priority Mode Display (B) Fixed Priority Display (C)
Vlan CoS Priority Display (D) ToS Field Priority Display.
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (A)
Class of Service > (A) Priority Mode Display
¾ Description Display the priority mode of Ethernet 1~4
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (A)
Class of Service > (B) Fixed Priority Display
¾ Description Display the transmission priority of Ethernet 1~4
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (A)
Class of Service > (C) Vlan CoS Priority Display
¾ Description Display the CoS priority value and its transmission priority
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (A)
Class of Service > (D) ToS field Priority Display
¾ Description Display the ToS priority value and its transmission priority
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (B)
Transmission Scheduling
¾ Description There are three options you can select from the Transmission
Scheduling: (A) Flow Control Display (B) Scheduling Algorithm
18
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (B)
Transmission Scheduling > (A) Flow Control Display
¾ Description Display the state of flow control for Ethernet 1~4
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (B)
Transmission Scheduling > (B) Scheduling Algorithm
¾ Description Display the scheduling method for each port
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display > (B)
Transmission Scheduling > (C) WRR Weight Display
¾ Description Display the weight for each queue
¾ Command Path Main Menu > (C) System Configuration > (C) Qos Display >
(C) Rate Control
¾ Description Display the rate control of Ethernet 1~4
¾ Command Path Main Menu > (C) System Configuration > (E) Ethernet Port
Display
¾ Description Shows layer one configuration for all RSTP ports. This includes
the state, auto negotiation, speed, and duplex status.
¾ Command Path Main Menu > (C) System Configuration > (L) Ethernet Swtich
Display
¾ Description Shows layer two configuration (age time) for RSTP
¾ Command Path Main Menu > (C) System Configuration Display> (P) Link
Aggregation Display
¾ Description Displays the state of Trunk1 and Trunk 2 for the link
aggregation
NOTE: Please refer to section 7.2.5 for detailed information on Link Aggregation.
19
¾ Command Path Main Menu > (C) System Configuration > (R) RSTP Display
¾ Description You will see actions RSTP, ETH1, ETH2, ETH3 and ETH4 at
the button of the screen. Use arrow keys to select the action
you need, then, press Enter to show the detail information of
the action you choose. If you select RSTP, you will see its
state. If you select ETH1~4, you will see its STP state, port
priority, port cost, link type, and edge port.
Then you will see the detail information for the action you select listed as below:
SLOT 2 TDMoE === RSTP Display === 15:49:06 12/30/2009
<< ESC key to return to previous menu, SPACE bar to refresh >>
ETH1
SLOT 2 TDMoE === RSTP Port Display === 08:35:34 01/06/2010
[ETH1]
STP State : DISABLE
Port Priority: 128
Port Cost : 19
Link Type : auto
Edge Port : Enable
<< ESC key to return to previous menu, SPACE bar to refresh >>
20
¾ Command Path Main Menu > (C) System Configuration > (T) Tributary Display
¾ Description There are two options you can select from the Tributary
Display: (A) Tributary Mode Display and (B) Tributary Display.
¾ Command Path Main Menu > (C) System Configuration Display> (T) Tributary
Display > (A) Tributary Mode Display
¾ Description Display the tributary mode
¾ Command Path Main Menu > (C) System Configuration Display> (T) Tributary
Display > (B) Tributary Configuration Display
¾ Description You will see actions Trib1, Trib2, Trib3, and Trib4 at the button
of the screen. Use arrow keys to select the action you need,
then, press Enter to show the detail information of the action
you choose. You will see its framing mode, CAS, and remote
loss.
Then you will see the detail information for the action you select listed as below:
SLOT 2 TDMoE === Tributary Display === 18:08:24 05/21/2010
<< ESC key to return to previous menu, SPACE bar to refresh >>
21
<< ESC key to return to previous menu, SPACE bar to refresh >>
¾ Command Path Main Menu > (H) Time Slot IP Configuration > (A) Bundle
Allocation Display
¾ Description Display the bundle allocation of Trib1~4
¾ Command Path Main Menu > (H) Time Slot IP Configuration > (B) Time Slot
Assignment Display
¾ Description Display the bundle for each time slot
Port:Trib1
22
¾ Command Path Main Menu > (H) Time Slot IP Configuration > (C) Bundle IP
Display
¾ Description Display the Source IP address, subnet mask, and gateway IP
¾ Command Path Main Menu > (H) Time Slot IP Configuration > (D) Time Slot IP
Assignment Display
¾ Description Display the UDP setting of a port
¾ Command Path Main Menu > (N) Status & Statistics > (B) Bundle Statistics
¾ Description Display the amount of bundle a port has and the traffic
statistics of each bundle
<< ESC key to return to previous menu, SPACE bar to refresh >>
¾ Command Path Main Menu > (N) Status & Statistics > (S) Ethernet Port
Statistics
¾ Description You will see actions ETH1, ETH2, ETH3, and ETH4 at the
button of the screen. Use arrow keys to select the action you
need, then, press Enter to show the detail information of the
action you choose.
23
Then you will see the traffic statistics for the port you select listed as below:
SLOT 2 TDMoE === Traffic Statistics === 18:19:13 01/05/2010
[ETH4]
Rx packets : 702630
Rx bytes : 203759888
Tx packets : 661144
Tx bytes : 191728270
Tx unicast Packets : 661140
Tx multicast Packets : 0
Tx broadcast Packets : 4
Tx pause Packets : 0
Rx unicast Packets : 702627
Rx multicast Packets : 0
Rx broadcast Packets : 3
Rx pause Packets : 0
Rx bulky packets : 0
Rx shorty packets : 0
Rx fragment packets : 0
CRC Error : 0
<< ESC key to return to previous menu, SPACE bar to refresh >>
¾ Command Path Main Menu > (N) Status & Statistics > (M) MAC Address
Display
¾ Description You will see selections All, ETH1, ETH2, ETH3, and ETH4 at
the button of the screen. Use arrow keys to select the action
you need, then, press Enter to show the detail information of
the action you choose.
You will see the MAC address information about the port connected shown on the screen:
SLOT 2 TDMoE === MAC Address Display === 18:19:57 01/05/2010
24
<< ESC key to return to previous menu, SPACE bar to refresh >>
¾ Command Path Main Menu > (N) Status & Statistics > (D) Bundle Status
¾ Description Display whether the bundle is active or inactive
P BID status
= === ========
1 0 active
<< ESC key to return to previous menu, SPACE bar to refresh >>
¾ Command Path Main Menu > (N) Status & Statistics > (E) Ethernet Port Status
¾ Description Shows layer one configuration for all RSTP ports. This includes
the state, auto negotiation, speed, and duplex status.
[ETH1]
State :Enable Speed :10Mbps Duplex :Half
Auto Negotiation:Enable Link :Down
[ETH2]
State :Enable Speed :10Mbps Duplex :Half
Auto Negotiation:Enable Link :Down
[ETH3]
State :Enable Speed :10Mbps Duplex :Half
Auto Negotiation:Enable Link :Down
[ETH4]
State :Enable Speed :10Mbps Duplex :Half
Auto Negotiation:Enable Link :Down
<< ESC key to return to previous menu, SPACE bar to refresh >>
25
¾ Command Path Main Menu > (N) Status & Statistics > (G) SFP Status
¾ Description You will see selections ETH1 and ETH2 at the button of the
screen. Use arrow keys to select the action you need, then,
press Enter to show the detail information of the action you
choose.
You will see the SFP status for the port you selected as shown below.
SLOT 1 TDMoE === SFP Status === 18:22:47 01/05/2010
<< ESC key to return to previous menu, SPACE bar to refresh >>
<< ESC key to return to previous menu, SPACE bar to refresh >>
26
7. SYSTEM SETUP
This chapter introduces setup procedures of TDMoE. This includes loopback setup, system setup,
time slot IP assignment, alarm setup, clear alarm history, clear performance data, and firmware
upgrade. Please go to the SETUP section in the main menu to find the part you want to operate.
When the framing mode for each port is T1-None or E1-Unframe, the screen is shown as:
SLOT 2 TDMoE === Loopback Setup === 11:58:07 05/24/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
27
¾ Command Path Main Menu > (S) System Setup > (A) Miscellaneous Setup
¾ Function Enables users to change the active bundle time, time durations
of alarm filter and delay switch.
[Protection]
Alarm Filter: 003
Delay Switch: 000
Recover Delay:000
Active Bundle Time Active bundle time is the period of time that the system tries to activate an
established but inactive bundle. A bundle is necessary between local and
remote devices to transmit TDMoE traffic. If the local device receives the
MAC address of the remote device through ARP Response (Address
Resolution Protocol), then the traffic can be steadily forwarded, and Active
Bundle Time will not be triggered. However, if the local device cannot
receive TDMoE traffic from the remote device, this situation is the so-called
“Remote Loss”. Hence, the local device will send ARP request frames and
request the MAC address of the remote device. Once a bundle is inactive,
this status would trigger its own Active Bundle Time in operation.
Alarm Filter When an alarm occurs, the system will monitor the alarm status. If the
alarm still exists after the configured time, the alarm queue will be issued.
28
Delay Switch When alarm is issued in the primary line, the configured time is the waiting
time to activate the switching protection (switch from the primary line to the
backup line).
Recover Delay It’s the delay switch for the backup line to switch back to the Master one
when the Master line recovers from link failure.
After you key in the active bundle time, press ESC. A prompt will ask if you wish to change the
configuration. Press Y to confirm.
>> Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup
¾ Description There are three options you can select from the Qos Setup: (A)
Class of Service (B) Transmission Scheduling (C) Rate
Control.
NOTE: Please refer to the Chapter 8 Appendix A: Quality of Service Setup for the entire explanation
and setup procedure on QoS Setup.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (A) Class of
Service
¾ Description There are four options you can select from the Class of
Service: (A) Priority Mode Setup (B) Fixed Priority Setup (C)
Vlan CoS Priority Setup (D) ToS Field Priority Setup.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (A) Class of
Service > (A) Priority Mode Setup
¾ Function Enables users to change the priority mode for each port
ETH1: Fixed
ETH2: Fixed
ETH3: Fixed
ETH4: Fixed
After you change the priority mode for ETH1, ETH2, ETH3, and ETH4, press Esc. A prompt will ask if
you wish to change configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
29
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) QoS Setup > (A) Class of
Service > (B) Fixed Priority Setup
¾ Function Enables users to change the transmission priority of each port
¾ Description By changing the transmission priority for each port, the user
can specify that the transmission priority for any port is high,
medium, or low.
Transmission priority
ETH1: P0
ETH2: P0
ETH3: P0
ETH4: P0
After you choose the transmission priority, press Esc. A prompt will ask if you wish to change
configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (A) Class of
Service > (C) Vlan CoS Priority Setup
¾ Function Enables users to change the transmission priority for each CoS
priority
¾ Description By changing the transmission priority for each class of service,
the user can specify that the transmission priority for any class
of service is high, medium, or low.
30
SLOT 2 TDMoE === Vlan Cos Priority Setup === 13:18:47 12/31/2009
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
After you choose the transmission priority for each tag priority, press Esc. A prompt will ask if you wish
to change configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (A) Class of
Service > (D) ToS Field Priority Setup
¾ Function Enables users to change the transmission priority for each ToS
priority
¾ Description By changing the transmission priority for each type of service,
the user can specify that the transmission priority for any type
of service is high, medium, or low.
After you choose the transmission priority for each tag priority, press Esc. A prompt will ask if you wish
to change configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
31
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (B)
Transmission Scheduling
¾ Description There are four options you can select from the Class of
Service: (A) Flow Control Setup (B) Scheduling Algorithm (C)
WRR Weight Setup.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (B)
Transmission Scheduling > (A) Flow Control Setup
¾ Function Enables users to change the state of flow control for each port
¾ Description Flow Control: Flow Control is a method that manages the rate
of data transmission between two devices. If
the sending device forwards data at a faster
rate than the buffer of the receiving device can
handle, then the latter device will send the
former one pause frames to request for
quenching the transmission rate.
Flow Control Setup:
y Enable: the port is able to control the transmission speed
y Disable: the flow control mechanism is disabled
ETH1: Disable
ETH2: Disable
ETH3: Disable
ETH4: Disable
After you choose Enable or Disable for each field, press Esc. A prompt will ask if you wish to change
configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
32
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (B)
Transmission Scheduling > (B) Scheduling Algorithm
¾ Function Enables users to change the scheduling method for each port
¾ Description Scheduling Algorithm:
y SP: depends on the hierarchy of the transmission priority.
P3 is the highest, and P0 is the lowest
y WRR: depends on the weight of each priority
ETH1: SP
ETH2: SP
ETH3: SP
ETH4: SP
NOTE:
SP: Strict Priority.
WRR: Weighted Round Robin.
After you choose SP or WRR for each port, press Esc. A prompt will ask if you wish to change
configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (B)
Transmission Scheduling > (C) WRR Weight Setup
¾ Function Enables users to change the weight for each queue
¾ Description The weight of each queue decides the transmission order of
those queues
33
After you enter new WRR Weight for each queue, press Esc. A prompt will ask if you wish to change
configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (C) Qos Setup > (C) Rate Control
Setup
¾ Function Rate Control/Limit: Rate Control/Limit is applied to manage the
transmission bandwidth of data flow from an
interface to its buffer. When the transmission
bandwidth of the ingress traffic exceeds the
preconfigured data rate, the exceeded portion of
ingress traffic will be dropped. For example, if
the speed of a Fast Ethernet port is 100 Mbps
and the rate limit is configured as 80 Mbps, then
only 80 Mbps of data can be forwarded to the
buffer. If there is a bursty traffic of 90Mbps, 10
Mbps of data will be dropped.
ETH1: 00 x 64kbps
ETH2: 00 x 64kbps
ETH3: 00 x 64kbps
ETH4: 00 x 64kbps
34
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (E) Ethernet Port Setup
¾ Function Enables users to change state, auto negotiation, speed, and
duplex for each port
¾ Description You will see selections ETH1, ETH2, ETH3, and ETH4 at the
button of the screen. Use arrow keys to select the port you
need, then press Enter to show the Ethernet Port Setup of the
port you choose.
35
Electrical
[ETH1]
Port Status : Enable
Auto Negotiation: Enable
Speed : 10Mbps
Duplex : Half
After you change the setting options for each field, press ESC. A prompt will ask if you wish to change
configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the configuration is successfully changed, the screen will return to the previous menu.
¾ Command Path Main Menu > (S) System Setup > (L) Ethernet Switch Setup
¾ Function Here, you can setup the age time for Ethernet layer two ports,
and add or delete any Ethernet port and its MAC address.
¾ Description For setup procedures, please see the screen demonstrations
shown below.
Age Time: the period of time that MAC addresses are flushed
from the MAC Address Table if they have not been
accessed during that interval
MGT: Management
36
NOTE: Setting the age time to zero disables the aging process.
Aging time must be a multiple of 15
If you select MAC address, you’ll first have to choose from two actions: Add (add a new static address)
or Del (delete a port or a static address). Use arrow keys to make your selection and press Enter.
SLOT 2 TDMoE === Ethernet Switch Setup === 15:38:36 12/31/2009
To add a new port, select Add. Using Tab to select a port, and using BACKSPACE to edit and enter
new MAC address:
SLOT 1 TDMoE === Add ethernet MAC Address === 18:17:54 11/05/2009
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
After you choose a port and enter the MAC address, press ESC. A prompt will ask if you wish to add the
address. Press Y to confirm.
Start to add (Y/N)?
When the MAC address is added successfully, a message will appear as shown below:
RESULT: OK
To delete a port, select Del. Using Tab to select a port and a static:
SLOT 2 TDMoE === Delete Ethernet MAC Table === 09:03:58 01/12/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
After you choose a port and a static, press ESC. A prompt will ask if you wish to add the address. Press
Y to confirm.
Start to delete (Y/N)?
When the MAC address is deleted successfully, a message will appear as shown below:
RESULT: OK
37
¾ Command Path Main Menu > (S) System Setup > (P) Link Aggregation Setup
¾ Function Enables users to change the state of Trunk1 and Trunk 2 for
the link aggregation
¾ Description Link Aggregation Setup:
y Disable: disable the link aggregation function
y Leader_ETH1~4: the trunk group’s configuration depends
on the leader port’s setting
NOTE:
Trunk Group1:ETH1,ETH2
Trunk Group2:ETH3,ETH4
38
Redundancy
Link Aggregation implicitly provides redundancy, yet it is not a truly port backup function of a TDMoE
card. For example, If 160 Mbps of data are transmitting over the trunk group, which implies each of the
two ports forwards 80 Mbps respectively. However, if one port fails, then its 80 Mbps traffic will be
transferred to another port. Yet, 60 Mbps of data will be dropped since the maximum bandwidth for a
single FE port is 100 Mbps. Hence, it is suggested that Flow Control should be enabled. After enabling
the Flow Control function, the system will send the connected device a pause frame to quench the data
rate. Otherwise, data will be dropped all along.
Precautions of Setup
y For the Link Aggregation to function properly, the “Link Aggregation” function of the connected
devices on both ends of an Ethernet cable must first be enabled.
y Within each trunk group, one port is selected as the leading port, and all the member ports must
follow the configurations of that leading port. For example, ETH1 is selected as the leading port,
then the port configurations of ETH2 such as flow control, speed and duplex mode must be
identical with ETH1. Furthermore, the ports of the connected device (e.g. ETH1 and ETH2 of
TDMoE card 2) ought to have the configurations identical to those of ETH1 of TDMoE card 1.
y Flow Control should be enabled so that the system will send the connected device a pause frame
to quench the data rate. Otherwise, data will be dropped all along.
¾ Command Path Main Menu > (S) System Setup > (R) RSTP Configuration
Setup
¾ Function Setup your RSTP parameters or close RSTP operation
¾ Description In this section you can do both RSTP and RSTP port
configuration setup. Use arrow key to select the action you
would like to activate. It can be RSTP, ETH1, ETH2, ETH3 or
ETH4.
RSTP state:
y OFF: Disable RSTP operation
y STP: Eisable STP operation
y RSTP: Enable RSTP operation
39
If you change the RSTP State from OFF to STP, you will see the screen as below.
SLOT 2 TDMoE === RSTP Setup === 09:52:14 01/05/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS, ENTER: CHANGE RSTP STATE
If you change the RSTP State from OFF to RSTP, you will see the screen as below. Note that the
acceptable value for the maximum age should be bigger or equal to twice the value of hello time+ 1,
and smaller or equal to twice the value of forward delay -1.
40
After you change the RSTP state, priority, hello time, maximum age, and forward delay, press ESC. A
prompt will ask if you wish to change configuration. Press Y to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the RSTP configuration is changed successfully, the screen will return to the previous page.
After you change the RSTP State to STP or RSTP, you can change the configuration for ETH1~4.
SLOT 2 TDMoE === RSTP Port Setup === 08:52:04 01/06/2010
ARROW KEYS: CURSOR MOVE, Please input: 0~240, BACKSPACE to edit
[ETH1]
STP State : DISABLE
Port Priority: 128
Port Cost : 00019
Link Type : auto
Edge Port : Enable
41
¾ Command Path Main Menu > (S) System Setup > (T) Tributary Setup
¾ Description There are two options you can select from the Tributary Setup:
(A) Tributary Mode Setup and (B) Tributary Setup.
¾ Command Path Main Menu > (S) System Setup > (T) Tributary Setup > (A)
Tributary Mode Setup
¾ Function Enables users to change the tributary mode
Mode: E1
After you select a mode, press ESC. A prompt will ask if you wish to change configuration. Press Y to
confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
¾ Command Path Main Menu > (S) System Setup > (T) Tributary Setup > (B)
Tributary Setup
¾ Function Enables users to change the framing mode, CAS, ARP on
remote loss of each tributary port
¾ Description You will see selections Trib1, Trib2, Trib3, and Trib4 at the
button of the screen. Use arrow keys to select the port you
need, then press Enter to show the configuration of the port
you choose.
42
E1
SLOT 2 TDMoE === Tributary Setup === 08:43:26 01/12/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
After you change the options, press ESC. A prompt will ask if you wish to change configuration. Press Y
to confirm.
Change configuration (Y/N)? (Note:to save,please use V-command)
When the RSTP configuration is changed successfully, the screen will return to the previous page.
43
¾ Command Path Main Menu > (T) Time Slot IP Assignment > (A) Bundle
Allocation Setup
¾ Function Enables users to change the bundle allocation of each tributary
port
¾ Command Path Main Menu > (T) Time Slot IP Assignment > (B) Time Slot
Assignment Setup
¾ Function Enables users to select a bundle for each time slot of a port
44
Port:Trib1
¾ Command Path Main Menu > (T) Time Slot IP Assignment > (C) Bundle IP
Setup
¾ Function Enables users to key in the source IP address, subnet Mask,
and Gateway IP for the bundle
¾ Command Path Main Menu > (T) Time Slot IP Assignment > (D) Time Slot IP
Assignment
¾ Function Enables users to change UDP settings for a port
45
Port : Trib1
Bundle ID : 00 PO/TS TS PO/TS TS BNDL ID/UDP NUM Dest IP Address
Format : AAL1 ===== == ===== == =============== ===============
ToS : 000 0 0 17 17
UDP Number : 00000 1 1 18 18
Dest IP Addr: 000.000.000.000 2 2 19 19 Cell Num Jitter Delay Jitter Size
Stratum : 3 3 3 20 20 ======== =========== ============
Cell in Bundle : 0005 4 4 21 21
Jitter Delay : 020 5 5 22 22
Jitter Size : 256 6 6 23 23
VLAN : OFF 7 7 24 24
CVLAN ID : 8 8 25 25
CVLAN Priority : 9 9 26 26
SVLAN ID : 10 10 27 27
SVLAN Priority : 11 11 28 28
Action : Add bundle 12 12 29 29
Confirm ? Yes 13 13 30 30
14 14 31 31
15 15
16 16
<< Press ESC key to return to main menu or save system setup >>
SAToP:
SLOT 2 TDMoE === Time Slot IP Assignment === 14:16:42 01/04/2010
Please input decimal number (1-65535), BACKSPACE to edit
Port : Trib1
Bundle ID : 00 PO/TS TS PO/TS TS BNDL ID/UDP NUM Dest IP Address
Format : SAToP ===== == ===== == =============== ===============
ToS : 000 0 0 17 17
UDP Number : 00000 1 1 18 18
Dest IP Addr: 000.000.000.000 2 2 19 19 Cell Num Jitter Delay Jitter Size
Stratum : 3 3 3 20 20 ======== =========== ============
Size in Bytes : 0300 4 4 21 21
Jitter Delay : 020 5 5 22 22
Jitter Size : 256 6 6 23 23
VLAN : OFF 7 7 24 24
CVLAN ID : 8 8 25 25
CVLAN Priority : 9 9 26 26
SVLAN ID : 10 10 27 27
SVLAN Priority : 11 11 28 28
Action : Add bundle 12 12 29 29
Confirm ? Yes 13 13 30 30
14 14 31 31
15 15
CESoPSN:
SLOT 2 TDMoE === Time Slot IP Assignment === 13:35:36 05/27/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Port : Trib1
Bundle ID : 00 PO/TS TS PO/TS TS BNDL ID/UDP NUM Dest IP Address
Format : CESoPSN ===== == ===== == =============== ===============
ToS : 000 0 17
UDP Number : 00000 1 18
Dest IP Addr: 000.000.000.000 2 19 Cell Num Jitter Delay Jitter Size
Stratum : 3 3 20 ======== =========== ============
Number of Frame: 05 4 21
Jitter Delay : 020 5 22
Jitter Size : 256 6 23
VLAN : OFF 7 24
CVLAN ID : 8 25
CVLAN Priority : 9 26
SVLAN ID : 10 27
SVLAN Priority : 11 28
Action : Add bundle 12 29
Confirm ? No 13 30
46
14 31
15
16
<< Press ESC key to return to main menu or save system setup >>
After confirming to save the configuration, the screen will be shown as below:
SLOT 2 TDMoE === Time Slot IP Assignment === 09:00:43 01/06/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Port : Trib1
Bundle ID : 00 PO/TS TS PO/TS TS BNDL ID/UDP NUM Dest IP Address
Format : AAL1 ===== == ===== == =============== ===============
ToS : 000 1 0 0 1 17 17 0 1 001.001.001.002
UDP Number : 00001 1 1 1 1 18 18
Dest IP Addr: 001.001.001.002 1 2 2 1 19 19 Cell Num Jitter Delay Jitter Size
Stratum : 3 1 3 3 1 20 20 ======== =========== ============
Cell in Bundle : 05 1 4 4 1 21 21 5 20 256
Jitter Delay : 020 1 5 5 1 22 22
Jitter Size : 256 1 6 6 1 23 23
VLAN : OFF 1 7 7 1 24 24
CVLAN ID : 1 8 8 1 25 25
CVLAN Priority : 1 9 9 1 26 26
SVLAN ID : 1 10 10 1 27 27
SVLAN Priority : 1 11 11 1 28 28
Action : Add bundle 1 12 12 1 29 29
Confirm ? Yes 1 13 13 1 30 30
1 14 14 1 31 31
1 15 15
1 16 16
<< Press ESC key to return to main menu or save system setup >>
47
Note:
1. There are 4 ports to have UDP number from 1 to 65535. If one port gets UDP number such as 100,
another port cannot use the same UDP number.
2. If the user chooses “Add Bundle” option for Action, the bundle ID must be unique for the particular
port. If the user chooses “Delete Bundle” option, the particular bundle must already be created. The
UDP number needs to be unique for all the ports.
size
delay
*Delay should be smaller than size. Also, the difference between size and delay should be larger
than the time that it takes to reconstruct a packet (otherwise an overrun may occur when the packet
arrives). Configuring the Jitter Buffer parameters correctly avoids under-run and overrun situation.
Under-run occurs when the Jitter Buffer is empty (the entering rate is lower than the exiting one). In
case of an under-run event, the chip transmits conditioning data instead of actual data towards the
TDM interface. Overrun occurs when the jitter buffer is full and there is no room for new data to
enter (the entering rate exceeds the exiting one). Under-run and overrun require special treatment
from the chip HW, depending on the bundle type.
Figure 7-2 Jitter Buffer Diagram
48
[DISPLAY] [SETUP]
1 -> 15-Min/1-Hr/7 Days Perf.Report L -> Loopback Setup
2 -> 15-Min/1-Day Perf.Report S -> System Setup
C -> System Configuration T -> Time Slot IP Assignment
J -> All Time Slot Assignment M -> Alarm Setup
H -> Time Slot IP Configuration R -> Clear Alarm History
N -> Status & Statistics X -> Clear Performance Data
A -> Alarm History W -> Firmware Upgrade
[LOG] [MISC]
U -> Choose Other Slot Y -> Unit Load Default
F -> Log Off [SETUP],[MISC] Menu Z -> Card Reset
O -> Log On [SETUP],[MISC] Menu
E -> Return to Controller Main Menu
49
[DISPLAY] [SETUP]
1 -> 15-Min/1-Hr/7 Days Perf.Report L -> Loopback Setup
2 -> 15-Min/1-Day Perf.Report S -> System Setup
C -> System Configuration T -> Time Slot IP Assignment
J -> All Time Slot Assignment M -> Alarm Setup
H -> Time Slot IP Configuration R -> Clear Alarm History
N -> Status & Statistics X -> Clear Performance Data
A -> Alarm History W -> Firmware Upgrade
[LOG] [MISC]
U -> Choose Other Slot Y -> Unit Load Default
F -> Log Off [SETUP],[MISC] Menu Z -> Card Reset
O -> Log On [SETUP],[MISC] Menu
E -> Return to Controller Main Menu
¾ Command Path Main Menu > (W) Firmware Upgrade > (A) Download Firmware
¾ Function Download Firmware allows you to select a particular firmware
to do the download.
¾ Description There are two firmware versions (1and 2) for you to select. To
confirm you TFTP server IP, type in the IP address and
firmware file name, and then press Enter.
50
51
8.1. Overview
This chapter provides a more detailed explanation on Quality of Service (QoS) and Scheduling
Algorithm. QoS is a control mechanism with the ability to provide different priorities to different data
flows and to ensure a corresponding level of performance to each data flow.
For TDMoE card, QoS can be sorted into three types: Class of Service (CoS), Type of Service (ToS),
and Fixed, these three methods are responsible for writing TDMoIP traffic from Ethernet interface to its
own queues, and all will be discussed later. Scheduling Algorithm is a method that determines the
transmission order of packets in the queues to the TDM interface or Tributary Port. Two types of
Scheduling Algorithms are applied in TDMoE card: Strict Priority (SP) and Weighted Round Robin
(WRR), both of which will be introduced later.
Generally, each interface of TDMoE card contains 4 queues, i.e. P0, P1, P2, and P3, and the order of
queues is P3 > P2 > P1 > P0. So, there are 16 queues in total. The total size of the 16 queues is 1M
bits.
To fulfill the complete QoS setup of ingress traffic, two steps are required: select (1) one of the three
QoS types and (2) one of the two Scheduling Algorithms. QoS is responsible for writing data from
Ethernet interface to the queues of ingress traffic, whereas Scheduling Algorithm is in charge of reading
data from the queues to the Tributary Port (TDM interfaces) of ingress traffic.
Noted that for the whole egress traffic data path, the QoS method of writing data from TDM interface to
the queues is “Fixed” method, and the “Scheduling Algorithm” of reading data from the queues to
Ethernet interfaces is “SP” – Strict Priority, and both cannot be changed.
Step by step setup instructions are interpreted below. The setup procedure explicated in this section
can be referred back to the QoS Setup shown in the VT-100 terminal (Path: Main Menu > (S) System
Setup > (C) QoS Setup).
52
8.2.1. QoS for Ingress Traffic – Writing Data From Ethernet Interface To Its Queues
In IP Networks, Quality of Service (QoS) serves as an essential role to guarantee the transmission
quality of service of the packets in a Best-Effort environment. Real-time video and voice data, for
example, require larger bandwidth and smaller transmission delay variation than e-mail service. It is
assumed that the network manager can recognize applications, such as voice, video, or email traffic,
and can evaluate their relative time-sensitivity or importance before the site installation. The network
manager can then group the applications into classes, which determine those frames with higher
priority for transmission and those which possess lower priority. QoS happens to be the technique that
groups data into different priorities. In other words, applying QoS is to maintain the quality of service
within IP Networks. Based on various techniques of QoS, setting procedures will become distinct. For
TDMoE card, three types of QoS concerning ingress traffic are available: Fixed, CoS, and ToS, which
define the way data are written from Ethernet interface to its own queues. The setup screen is shown
as below.
ETH1: Fixed
ETH2: Fixed
ETH3: Fixed
ETH4: Fixed
For further information of Fixed, CoS, and ToS priority modes, please refer to the relevant section
beneath.
If the “Priority Mode” of interfaces is set as “Fixed” mode, the next step is to configure the “Fixed Priority
Setup”. The screen is shown as below.
SLOT 2 TDMoE === Fixed Priority Setup === 13:17:01 12/31/2009
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Transmission priority
ETH1: P0
ETH2: P0
ETH3: P0
ETH4: P0
Configuring the priority mode of an interface as Fixed implies the relationship between LAN side
interfaces and transmission priorities (its queues) are fixed. For example, if the priority mode for both
ETH1 and ETH2 is Fixed and their transmission priorities are set as P1 and P0, respectively, this
suggests frames entering ETH1 will be assigned to its own P1(Queue1), and ingress traffic of ETH2 will
be sent to its own P0(Queue0).
53
One thing should be noticed. If the priority mode of ETH4 is set as CoS or ToS, for instance, and then
you go on to configure its Fixed priority, the system will ignore the setting of Fixed Priority. This is
because that if you set the priority mode of an interface as CoS or ToS, the next step is to perform the
VLAN CoS priority setup or ToS field priority setup rather than Fixed Priority, and both CoS and ToS are
introduced in succeeding sections.
If “CoS” is selected as the “Priority Mode”, the next step is to configure the “VLAN CoS Priority Setup”.
The screen is shown as below.
SLOT 2 TDMoE === Vlan Cos Priority Setup === 13:18:47 12/31/2009
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Class of Service (CoS) is a 3-bit field added in the MAC header when applying VLAN tagging. CoS is
adopted to discriminate higher-priority traffic from lower-priority one. CoS determines the relationship
between priorities of ingress Ethernet frame traffic and queues. There are 8 levels of priority values,
ranging from 0 to 7, where 0 is the lowest priority and 7 the highest. By attaching priority value to
frames, users are enabled to classify and place them into different queues. The screen above allows
users to configure the transmission priority (= queue) for packets with different priorities.
Assumed that the priority mode for ETH3 and ETH4 are “CoS”, then both ports should apply the “VLAN
CoS Priority Setup”. Moreover, ETH3 and ETH4 share common settings, rather than have their own.
If “ToS” is selected as the “Priority Mode”, the next step is to configure the “ToS Field Priority Setup”.
The screen is shown as below.
SLOT 2 TDMoE === TOS field Priority Setup === 13:28:23 12/31/2009
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
54
Type of Service (ToS) is an 8-bit field placed in the IP header to indicate how packets are treated. ToS
determines the relationship between priorities of ingress IP packet traffic and queues. The 3 leftmost
bits possess a priority value ranging from 0 to 7, which implies the importance of a packet. The higher
the value, the more important the packet (default value = 0). By attaching priority value to packets,
users are enabled to classify and place them into different queues. The screen above allows users to
configure the transmission priority (= queue) for packets with different priorities.
Assumed that the priority mode for ETH1 and ETH4 are “ToS”, then both ports should apply the “ToS
Field Priority Setup”. Moreover, ETH1 and ETH4 share common settings, rather than have their own.
8.2.2. Scheduling Algorithm for Ingress Traffic – Reading Data From Queues to TDM
Interface
After QoS setup for ingress traffic is complete, the following process is to configure the Scheduling
Algorithm for ingress traffic, which determines how packets are polled out of the queues and
transmitted to TDM interfaces. If more than one of the queues for a port contains packets, then a
transmission scheduling algorithm determines which queue should be transmitted first. Here, TDMoE
card supports two scheduling algorithm taking charge of reading data from queues to TDM interface:
Strict Priority (SP) and Weight Round Robin (WRR). The mechanisms and setup screens are shown
below.
ETH1: SP
ETH2: SP
ETH3: SP
ETH4: SP
NOTE:
SP: Strict Priority.
WRR: Weighted Round Robin.
Strict Priority (SP): When a port applies SP Algorithm, it suggests packets/frames will be delivered
from queues to that port in a strict order. Whenever packets are to be forwarded, the system will
transmit packets starting from the highest priority queue. For TDMoE card, each port includes 4 queues.
The hierarchy of all the queues is: queue 3 is considered with highest priority, queue 2 is prior to queue
1, and Queue 0 has the lowest priority, i.e. queue3>queue 2>queue 1>queue 0. For example, queue 3,
queue 2 and queue 1 all contain 4 packets. All 4 packets of queue 3 should be transmitted before any of
those in queue2 or queue 1 are. Before queue 1 sends packets, all the packets in queue 2 should be
delivered.
Yet, if you configure the scheduling algorithm as WRR, there is one last step to go, i.e. setup the WRR
Weight Ratio, as shown below.
SLOT 2 TDMoE === WRR Weight Setup === 14:24:08 12/31/2009
ARROW KEYS: CURSOR MOVE, Please Input: 0~100, BACKSPACE to edit
55
56
TDMoE TDMoE
AM3440#1 (slot1 port1)
(slot1 port1) AM3440#2
Master
T1 (slot10 TDMoE and QE1/T1 Master
T1 (slot10
port1) Slave 1+1 protection port1)
Slave
QE1/T1 QE1/T1
(slot2 port1) Leased line (slot2 port1)
Backup line
Figure 9-1 TDMoE and QE1/T1 1 + 1 Protection
For both AM3440#1 and AM3440#2, the configuration procedure is identical. In this section, the setup
instructions of the AM3440#1 are applied as an example.
NOTE:
When using 1+1 Protection with Quad E1/T1 card, two plug-in cards must be inserted next to each
other as a pair so that one plug-in card can be used to protect the other.
For example: A pair of TDMoE and Quad E1/T1 cards should be installed in one of the following slot
groupings: [1&2], [3&4], [5&6], [7&8], [9&10] or [11&12].
Each TDMoE and Quad E1/T1 card has four ports. The ports of one card protect the corresponding
ports of the other card. For example, Port 1 of the protection card protects Port 1 of the other card.
Similarly, Port 2 of the protection card protects Port 2 of the other card, etc.
57
¾ Command Path: TDMoE Main Menu > (S) System Setup > (T) Tributary Setup > (A) Tributary Mode
Setup
¾ Mode options: E1, T1
Mode: T1
After setting the card mode, then go on to set up the framing mode and CAS for each of the 4 tributary
ports.
¾ Command Path: TDMoE Main Menu > (S) System Setup > (T) Tributary Setup > (B) Tributary
Setup
¾ Framing options for T1: T1-None, T1-T1403, T1-ESF, T1-D4
¾ Framing options for E1 ; E1-Unframe, E1-FAS
Users have to select the port for framing mode to be configured. Here, we choose Trib1 as an example.
SLOT 1 TDMoE === Tributary Setup === 15:33:10 08/03/2011
After choosing a port, then set up its framing mode. For T1 mode, we select T1-ESF as an example.
SLOT 1 TDMoE === Tributary Setup === 15:34:45 08/03/2011
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
NOTE:
1. For voice application, CAS must be ON.
2. The framing mode and CAS need to be configured for all the 4 ports, and each port has its
own settings.
3. If the Framing Mode of a port is framed, and “TSI Map Setup” in AM3440 Controller Menu
((S) System Setup > (C) TSI Map) is configured, you need to clear TSI Map (AM3440 Main
Menu > (S) System Setup > (F) Clear a TSI Map) and delete bundle(s) of that port before
changing settings of Framing Mode and CAS. A warning message will appear at the bottom
58
of the screen:
Once the framing mode setup is accomplished, the next step is to configure the bundle IP, including
Source IP Address, Subnet Mask, and Gateway IP.
¾ Command Path: TDMoE Main Menu > (T) Time Slot IP Assignment > (C) Bundle IP Setup
To check the Bundle IP setting, users can go to Bundle IP Display (TDMoE Main Menu > (H) Time Slot
IP Configuration > (C) Bundle IP Display)).
After Configuring the Bundle IP, the following step is to assign bundles to the timeslots. Each tributary
interface can be assigned more than one bundles.
¾ Command Path: TDMoE Main Menu > (T) Time Slot IP Assignment > (B) Time Slot Assignment
Setup
SLOT 1 TDMoE === Time Slot Assignment Setup === 15:40:52 08/03/2011
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Port:Trib1
59
TS11: Bundle0
TS12: Bundle0
TS13: Bundle0
TS14: Bundle0
TS15: Bundle0
To check the time slot assignment setting, users can go to Time Slot Assignment Display (TDMoE Main
Menu > (H) Time Slot IP Configuration > (B) Time Slot Assignment Display)).
After the Time Slot Assignment Setup is fulfilled, users have to configure the parameters for each
bundle.
¾ Command Path: TDMoE Main Menu > (T) Time Slot IP Assignment > (D) Time Slot IP Assignment
Port : Trib1
Bundle ID : 00 PO/TS TS PO/TS TS BNDL ID/UDP NUM Dest IP Address
Format : AAL1 ===== == ===== == =============== ===============
ToS : 000 0 17 17 0 1 192.168.014.200
UDP Number : 00001 1 1 1 18 18
Dest IP Addr: 192.168.014.200 1 2 2 19 19 Cell Num Jitter Delay Jitter Size
Stratum : 3 1 3 3 20 20 ======== =========== ============
Cell in Bundle : 05 1 4 4 21 21 5 20 256
Jitter Delay : 64 1 5 5 22 22
Jitter Size : 256 1 6 6 23 23
VLAN : OFF 1 7 7 24 24
CVLAN ID : 1 8 8
CVLAN Priority : 1 9 9
SVLAN ID : 1 10 10
SVLAN Priority : 1 11 11
Action : Add bundle 1 12 12
Confirm ? Yes 1 13 13
1 14 14
1 15 15
16 16
<< Press ESC key to return to main menu or save system setup >>
NOTE:
1. The UDP number must be unique for all the bundles.
2. The Destination IP is the IP address for the remote TDMoE card to be mapped to.
3. For TDMoE card with PPM version, Stratum should always be 3.
4. For AM3440#2, the destination IP Address is the IP Address of AM3440#1, i.e.
192.168.014.100.
5. The Jitter Delay setting depends on the network environment. For detailed information,
please refer to Section 7.3.4 Time Slot IP Assignment.
To check the bundle settings, users can go to Time Slot IP Assignment Display (TDMoE Main Menu >
(H) Time Slot IP Configuration > (D) Time Slot IP Assignment Display)).
The entire process of setting up bundle(s) is complete. Users can ascertain whether the settings are
successfully configured through All Time Slot Assignment.
¾ Command Path: TDMoE Main Menu > (J) All Time Slot Assignment
SLOT 1 TDMoE === All Time Slot Assignment === 15:44:20 08/03/2011
60
<< ESC key to return to previous menu, SPACE bar to refresh >>
¾ Command Path: AM3440 Controller Menu > (S) System Setup > (Q) QDS1 1:1 Protection
The QDS1 Protection screen will appear. Choose Setup. The Setup menu is to setup the protection
modes for each protection pair and ports.
LOOP AM3440-A === QDS1 1:1 Protection === 15:46:05 08/03/2011
On the Setup Screen, there are four selections for the user to setup such as disable, line-nonrevertive,
line-revertive, 1+1 nonrevertive, and 1+1 revertive. To perform the 1+1 protection, select 1+1
nonrevertive or 1+1 revertive. The sample below is to setup the port 1 of slot 1: 2 as 1+1 revertive
protection.
LOOP AM3440-A === QDS1 1:1 Protection === 15:46:07 08/03/2011
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Protect Pair(Master:Backup) Port 1 Port 2 Port 3 Port 4
=========================== =========== =========== =========== ===========
Slot A :B ( : ) ----------- ----------- ----------- -----------
Slot C :D ( RTR : RTR ) ----------- ----------- ----------- -----------
Slot 1 :2 ( TDMOE:QuadT1) 1+1REV DISABLE DISABLE DISABLE
Slot 3 :4 ( : DTE-A) ----------- ----------- ----------- -----------
Slot 5 :6 ( : ) ----------- ----------- ----------- -----------
Slot 7 :8 (X.50 : ) ----------- ----------- ----------- -----------
Slot 9 :10 ( :QuadT1) ----------- ----------- ----------- -----------
Slot 11:12 ( : ) ----------- ----------- ----------- -----------
NOTE:
1. 1+1 revertive: When the master line recovers, the working line will automatically switch from
the backup line back to the master one. The switching time is user configurable
61
(Command Path: TDMoE Main Menu > (S) System Setup > (A) Miscellaneous
Setup).
2. 1+1 nonrevertive: After the working line switches from master to backup, it will not shift back to
the master even though the master line has recovered.
After activating the 1+1 protection, users need to set the cross-connect map.
¾ Command Path: AM3440 Controller Menu > (S) System Setup > (C) TSI Map Setup.
<< Press ESC to return to Controller Setup menu, then Press D to active >>
After configuring the TSI MAP, the next step is to activate the TSI MAP.
¾ Command Path: AM3440 Controller Menu > (S) System Setup > (D) Select a New TSI MAP
Select the MAP that is configured, and Press ESC. A prompt will ask if you are sure.
LOOP AM3440-A === System Setup (New map) === 15:50:03 08/03/2011
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
62
NOTE: To make sure whether the MAP is activated, users can check the Current TSI MAP from the
System Main Menu.
¾ Command Path: AM3440 Controller Menu > (C) System Configuration > (D) Current TSI MAP
After activating the TSI Map, the last step is to setup the clock source.
¾ Command Path: AM3440 Controller Menu > (S) System Setup > (K) Clock Source Setup
Mast er_ Clk Sou rce : INTE RNA L Cloc k H old -Ove r: ON
Seco nd_ Clk Sou rce : INTE RNA L
Curr ent Cl ock : MAST ER_ CLK
Clk_ Rec ove r_Mo de : AUTO MAT IC
Cloc k S tat us : NORM AL
Ext. Cl ock Typ e : E1(7 5oh m)
Dual Ex ter nal Clo ck Prot ect ion : D isa ble
After the entire process of setting up 1+1 protection for both AM3440#1 and AM3440#2 are complete,
users can ascertain whether the settings are successfully configured by checking the bundle status. If
the bundle status is active, then the configuration is accomplished.
63
Bundle Status
¾ Command Path: TDMoE Main Menu > (N) Status & Statistics > (D) Bundle Status
P BID status
= === ========
1 0 active
<< ESC key to return to previous menu, SPACE bar to refresh >>
64