Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Front view Distance as determined Cross section

by geotechnical requiements
A wire rope anchor ø10.5mm

iem ed
ts
qu in
en
re rm
al te
nic de
c h as
o te c e
ge tan
by Dis
High tensile steel
Nail
wire mesh
DELTAX G80/2 mm
corrosion protection
94.5% Zn / 5% Al /
0.5% special add-on

Nail with domed plate

Detail A
wire rope anchor ø10.5mm
Mesh connection vertical
Domed plate normally without overlap
150x150 mm
Press claw Typ 2
Top boundary rope
(1 press claw every
min. ø10mm
third diamond)

Lateral boundary rope


min. ø10mm

Press claw Typ 2


(1 press claw every
second diamond)
connection Clip T3
(1 clip T3 per diamond)

Detail press claw Typ 2 Detail Connection Clip T3

modification: M:% substitute for: GE-1005e ed. 10.08.16


- replaced by:
drawn 20.06.19 BIH
DELTAX G80/2
System drawing checked 20.06.19 BIH
This document is proprietary to GEOBRUGG AG and is copyrighted with all approved 20.06.19 ROA1
rights reserved. It may not in whole or in part, be distributed, copied in any
form, translated or otherwise reproduced in any form.
GEOBRUGG AG BRUGG GE-1005 e
This document will not be exchanged, when being modified. CH-8590 Romanshorn

You might also like