Scribd Logo
Upload

Welcome to Scribd!

  • 2.4M Cantilever Design

    Uploaded by

    rajeev shah
    92 views1 page
    The document provides design details for a one-way slab with a span of 2.4 meters. The slab has a depth of 200 mm and is designed to support a total load of 7.25 KN/m^2 including dead, live, and finishing loads. Main reinforcement is specified as 12 mm bars spaced at 100 mm centers, which provides sufficient strength with a calculated stress of 113.5 N/mm^2, less than the allowable 0.58*Fy. Distribution reinforcement of 8 mm bars at 100 mm spacing also meets the required spacing of 209 mm.

    Original Description:

    Original Title

    2.4M CANTILEVER DESIGN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides design details for a one-way slab with a span of 2.4 meters. The slab has a depth of 200 mm and is designed to support a total load of 7.25 KN/m^2 including dead, live, and finishing loads. Main reinforcement is specified as 12 mm bars spaced at 100 mm centers, which provides sufficient strength with a calculated stress of 113.5 N/mm^2, less than the allowable 0.58*Fy. Distribution reinforcement of 8 mm bars at 100 mm spacing also meets the required spacing of 209 mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    92 views1 page

    2.4M Cantilever Design

    Uploaded by

    rajeev shah
    The document provides design details for a one-way slab with a span of 2.4 meters. The slab has a depth of 200 mm and is designed to support a total load of 7.25 KN/m^2 including dead, live, and finishing loads. Main reinforcement is specified as 12 mm bars spaced at 100 mm centers, which provides sufficient strength with a calculated stress of 113.5 N/mm^2, less than the allowable 0.58*Fy. Distribution reinforcement of 8 mm bars at 100 mm spacing also meets the required spacing of 209 mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    DESIGN OF ONE WAY SLAB

    Span Marked s1
    Short Span L = 2.4 mt. Fy Main = 500 N/sqmm
    Let Depth D = 200 mm Dia. Main = 12 mm
    2
    Dead load = 5.000 KN/m Fy Distribution = 500 N/sqmm
    2
    Live load = 0.75 KN/m Dia. Distribution = 8 mm
    2
    Floor finish = 1.50 KN/m Fck = 35 N/sqmm
    2
    Filling/Steps = 0.00 KN/m Cover = 25 mm
    2
    TOTAL LOAD = 7.25 KN/m Effective Depth = 169 mm

    B.M = 1.5 x 7.25 x( 2.4 )2


    = 31.320 KN-m/m 2
    2
    Ast = 443 mm

    Provide F 12 @ 100 c/c Ast = 1130.97 mm2

    Refer to fig.4 pg 38 IS 456:2000

    fs = 0.58 x Fy x Ast
    Ast
    = 0.58 x 500 x 442.8
    1131.0
    fs = 113.5 N/mm2

    Pt prov = 0.67 %

    Read MF = 2.07640675
    Required d = 2400 = 165.12 mm < dprov SAFE
    2.07640675 x 7

    Distribution Reinf = 0.12 x 2000 = 240 mm2 / m


    Reqd. spacing = 209 mm
    SUMMARY Provided spacing = 100 mm
    D = 200 mm
    REINFORCEMENT
    Main Steel = 12 @ 100 mm c/c
    Distribution Steel = 8 @ 100 mm c/c

    You might also like