Western Irrigation

System Pvt. Ltd.

Mfg. : HDPE, uPVC Pipes & Fittings

QUALITY IN EVERY WAY

www.westernispl.com
HDPE PIPE - High Density Polyethylene Pipe www.westernispl.com

HDPE PIPE has ability to withstand harsh chemicals without corrosion and leak as well as the tight installation, Improvements
in the strength and performance of PE materials has resulted in water, chemical & several other industries.

Characteristics of HDPE Pipe

• Elastic Suitable for underground pipes through adjustment to local ground movement
• Impact-resistant and tough Unbreakable
• Smooth internal wall Low blockage risk due to low deposit/residue effects
• UV resistant Application in open air unrestricted through colouring with carbon black
• Wear resistant Lower cost due to relative long life
• Insulating Non conductive
• Chemical resistant Suitable for transport of polluted waste water
• Poor heat conductivity No condensation possible during short periods of cooling
• Non-toxic Environmental friendly
• Highly suitable for welding Easy installation using butt-welding and electro fusion techniques
• Homogeneous welded joints Pull tight and leak proof
• Prefabrication Fast and cost-saving installation

Application Advantages of HDPE Pipe use :

Industrial :
• Chemical Industries for disposal of chemical waste
• Oil and Milk Transportation
• Discharge of Radioactive waste
• Acid and slurries transportation
• Salt water landing
Domestic And Others :
• Potable water supply in rural and urban area
• For Colony Water System
• Bio Gas, Cool Gas and Natural Gas Distribution Lines
• Telecommunication Cable Ducting
• Air Conditioner Ducting
HDPE PIPE - Wall Thickness Chart www.westernispl.com

AS PER IS 4984:2016 WALL THICKNESS OF HDPE PIPES

SDR
DN SDR 41 SDR 33 SDR 26 SDR 21 SDR 17
PEDN63 PN 2 PN 2.5 PN 3.2 PN 4 PN 5
PEDN80 PN 2.5 PN 3.2 PN 4 PN 5 PN 6
PEDN
100 PN 3 PN 4 PN 5 PN 6 PN 8
DN Min Max Min Max Min Max Min Max Min Max
20
25
32 1.90 2.20
40 1.90 42.20 2.40 2.70
50 2.00 2.30 2.40 2.70 3.00 3.40
63 2.50 2.90 3.00 3.40 3.70 4.20
75 1.90 2.20 2.30 2.60 2.90 3.30 3.60 4.10 4.50 5.10
90 2.20 2.50 2.80 3.20 3.50 4.00 4.30 4.80 5.30 5.90
110 2.70 3.10 3.40 3.80 4.30 4.80 5.90 6.60 6.50 7.30
125 3.10 3.50 3.80 4.30 4.80 5.40 6.00 6.70 7.40 8.20
140 3.50 4.00 4.30 4.80 5.40 6.00 6.70 7.50 8.30 9.20
160 3.90 4.40 4.90 5.50 6.20 6.90 7.70 8.60 9.50 10.60
180 4.40 4.90 5.50 6.20 7.00 7.80 8.60 9.60 10.60 11.80
200 4.90 5.50 6.10 6.80 7.70 8.60 9.60 10.70 11.80 13.10
225 5.50 6.20 6.90 7.70 8.70 9.70 10.80 12.00 13.30 14.70
250 6.10 6.80 7.60 8.50 9.70 10.80 12.00 13.30 14.70 16.30
280 6.90 7.70 8.50 9.50 10.80 12.00 13.40 14.80 16.50 18.30
315 7.70 8.60 9.60 10.70 12.20 13.50 15.00 16.60 18.60 20.60

SDR
DN SDR 13.6 SDR 11 SDR 9 SDR 7.4 SDR 6
PEDN63 PN 6 PN 8
PEDN80 PN 8 PN 10 PN 12.5 PN 16 PN 20
PEDN
100 PN 10 PN 12.5 PN 16 PN 20
DN Min Max Min Max Min Max Min Max Min Max
20 1.90 2.20 2.30 2.60 2.70 3.10 3.40 3.80
25 1.90 2.20 2.30 2.60 2.80 3.20 3.40 3.80 4.20 4.70
32 2.40 2.70 2.90 3.30 3.60 4.10 4.40 4.90 5.40 6.00
40 3.00 3.40 3.70 4.20 4.50 5.10 5.40 6.00 6.70 7.50
50 3.70 4.20 4.60 5.20 5.60 6.30 6.80 7.60 8.40 9.30
63 4.70 5.30 5.80 6.50 7.00 7.80 8.60 9.60 10.50 11.70
75 5.60 6.30 6.90 7.70 8.40 9.30 10.20 11.30 12.50 13.90
90 6.70 7.50 8.20 9.10 10.00 11.10 12.20 13.50 15.00 16.60
110 8.10 9.00 10.00 11.10 12.30 13.60 14.90 16.00 18.40 20.30
125 9.20 10.20 11.40 12.70 13.90 15.4 16.90 18.70 20.90 23.10
140 10.30 11.40 12.80 14.20 15.60 17.30 19.00 21.00 23.40 25.80
160 11.80 13.10 14.60 16.20 17.80 19.70 21.70 24.00 26.70 29.50
180 13.30 14.70 16.40 18.10 20.00 22.10 24.40 26.90 30.00 33.10
200 14.70 16.30 18.20 20.10 22.30 24.60 27.10 29.90 33.40 36.80
225 16.60 18.40 20.50 22.70 25.00 27.60 30.50 33.70 37.50 41.40
250 18.40 20.30 22.80 25.20 27.80 30.70 33.80 37.30 41.70 16.00
280 20.60 22.80 25.50 28.20 31.20 34.40 37.90 41.80 46.70 51.50
315 23.20 25.60 28.70 31.70 35.00 38.60 42.60 47.00 52.50 57.90
uPVC Pipe www.westernispl.com

• uPvc offers High Strength & Durability

• Easy Handling, Transportation and Installation
• Non Reactive with acidic and alkali substance in water ideal for drain water discharge as well as a numerous
number of chemicals like strong minerals acids that could be therein.
• Non Corrosive, Ensures longer life cycle.
• It offers excellent life avoiding Electro Chemical reactions, which generally lead to encrustation of pipes.
• It have long life cycle which saves on replenishment and replacement costs.
• It offers a reliable piping system which is highly resilient, tough and durable with excellent impact strength.
• It is easy and fast jointing which saves on time and cost of installation yet a long and reliable service life.
• It is UV Stabilized
• Suitable for outdoor application
• Offers longer life cycle
• No fungal or biological growth

Application

• Urban and Rural areas drinking water scheme

• Water supply
• Lift Irrigation
• Main and sub main line for Drip and Sprinkler Irrigation
• Fertilizer, Distributing disposing, Conveying, Lifting or Topping Water

DIMENSION OF UNPLASTICISED PVC PIPES

ALL DIMENSION IN MILLIMETERS

Nominal Mean Outside Working Pressure, Mpa

Outside Outside Diameter at
Diameter Diameter Anypoint Class 1 Class 2 Class 3 Class 4 Class 5 Class 6
0.25 Mpa 0.40 Mpa 0.60 Mpa 0.80 Mpa 1.00 Mpa 1.25 Mpa
Avg Avg Avg Avg Avg Avg
OD Min Mix Min Mix Max
Min Max
Max
Min Max
Max
Min Max
Max
Min Max
Max
Min Max
Max
Min Max

20 20.0 20.3 19.5 20.5 1.5 1.1 1.5 1.8 1.4 1.8
25 25.0 25.3 24.5 25.5 1.6 1.2 1.6 1.8 1.4 1.8 2.1 1.7 2.1
32 32.0 32.3 31.5 32.5 1.9 1.5 1.9 2.2 1.8 2.2 2.7 2.2 2.7
40 40.0 40.3 39.5 40.5 1.8 1.4 1.8 2.2 1.8 2.2 2.7 2.2 2.7 3.3 2.8 3.3
50 50.0 50.3 49.4 50.6 2.1 1.7 2.1 2.8 2.3 2.8 3.3 2.8 3.3 4.0 3.4 4.0
63 63.0 63.3 62.2 63.8 1.9 1.5 1.9 2.7 2.2 2.7 3.3 2.8 3.3 4.1 3.5 4.1 5.0 4.3 5.0
75 75.0 75.3 74.1 75.9 2.2 1.8 2.2 3.1 2.6 3.1 4.0 3.4 4.0 4.9 4.2 4.9 5.9 5.1 5.9
90 90.0 90.3 88.9 91.1 1.7 1.3 1.7 2.6 2.1 2.6 3.7 3.1 3.7 4.6 4.0 4.6 5.7 5.0 5.7 7.0 6.1 7.1
110 110.0 110.4 108.6 111.4 2.0 1.6 2.0 3.0 2.5 3.0 4.3 3.7 4.3 5.6 4.9 5.6 7.0 6.1 7.1 8.5 7.5 8.7
125 125.0 125.4 123.5 126.5 2.2 1.8 2.2 3.4 2.9 3.4 5.0 4.3 5.0 6.4 5.6 6.4 7.8 6.9 8.0 9.6 8.5 9.8
140 140.0 140.5 138.5 141.7 2.4 2.0 2.4 3.8 3.2 3.8 5.5 4.8 5.5 7.2 6.3 7.3 8.7 7.7 8.9 10.7 9.5 11.0
160 160.0 160.5 158.0 162.0 2.8 2.3 2.8 4.3 3.7 4.3 6.2 5.4 6.2 8.2 7.2 8.3 9.9 8.8 10.2 12.2 10.9 12.6
180 180.0 180.6 177.8 182.2 3.1 2.6 3.1 4.9 4.2 4.9 7.0 6.1 7.9 9.0 8.0 9.2 11.1 9.9 11.4 13.7 12.2 14.1
200 200.0 200.6 197.6 202.4 3.4 2.9 3.4 5.3 4.6 5.3 7.7 6.8 7.9 10.0 8.9 10.3 12.3 11.0 12.7 15.2 13.6 15.7
225 225.0 225.7 222.3 227.7 3.9 3.3 3.9 6.0 5.2 6.0 8.6 7.6 8.8 11.2 10.0 11.5 13.9 12.4 14.3 17.1 15.3 17.6
250 250.0 250.8 247.0 253.0 4.2 3.6 4.2 6.5 5.7 6.5 9.6 8.5 9.8 12.6 11.2 12.9 15.4 13.8 15.9 18.9 17.0 19.6
280 280.0 280.9 276.6 283.4 4.8 4.1 4.8 7.3 6.4 7.3 10.7 9.5 11.0 14.4 12.5 14.4 17.2 15.4 17.8 21.1 19.0 21.9
315 315.0 315.0 311.2 318.8 5.3 4.6 5.3 8.2 7.2 8.2 12.0 10.7 12.4 15.6 14.0 16.1 19.3 17.3 19.9 23.8 21.4 24.7
HDPE Fittings www.westernispl.com

HDPE Fittings Products

• Ball Valve
• Butt Fusion Elbow
• Fabricated Elbow
• Long Neck Pipe end
• Tee
• Sandwich Flange
• Sortneck Pipe end
• Blind Flange
• End Cape
• Fabricated Tee
Available Size • Reducer
• Puddle Flange
20mm l 32mm l 40mm l 50mm l 63mm
• Slip On Flange
75mm l 90mm l 110mm l 125mm l 140mm
• Weldneck Flange
160mm l 180mm l 200mm l 225mm l 250mm
• Tail piece
280mm l 315mm
Rain Gun www.westernispl.com

Application

PERFORMANCE CHART - SPRINKLER GUN 1-1/2”

Nozzle
Size in 12 x 5.1 14 x 5.1 16 x 5.1 18 x 5.1
mm

Dia Meter Discharge Dia Meter Discharge Dia Meter Discharge Dia Meter Discharge
Pressure
of in LPM of in LPM of in LPM of in LPM
Sprinkler
Coverage Coverage Coverage Coverage
Head
in M in M in M in M

2kg/cm sq 40 150 42 192 44 245 56 375

3kg/cm sq 48 180 50 235 52 300 60 432
4kg/cm sq 55 210 57 275 58 350 67 485
5kg/cm sq 60 230 62 305 65 388 72 530
Sprinkler www.westernispl.com

Features

• Sprinkler irrigates two to three times more area than surface irrigation.
• It is easy to spread Fertilizer and Chemicals
• It covers one or more than one area with same system.
• Land levelling is not required for use
• Suitable for irrigating crops where the plant population per unit area is very high. It is most suitable for oil seeds
and other cereal and vegetable crops
• It creates light precipitation and more irrigation coverage, making soil erosion nearly negligible
• It is simple to install, operate and maintain
• Very low maintenance, Easy to install, Suitable for unskilled labour.
• All parts of sprinkler irrigation system are corrosion less.

SIZE AND WALL THICKNESS CHART OF SPRINKLER PIPE

Nominal Outside Nominal Ovality Wall Thickness

Diameter Diameter Tolerance
on Class l Class ll Class lll Class lV
Outside 0 25 Mpa 0 32 Mpa 0 4 Mpa 0 6 Mpa
Diameter Min Max Min Max Min Max Min Max

40 40.0 +0.4 1.4 2.3 2.8

50 50.0 +0.5 1.4 2.0 2.4 2.9 3.4
63 63.0 +0.6 1.5 2.0 2.4 2.5 2.9 3.8 4.4
75 75.0 +0.7 1.6 2.0 2.4 2.5 2.9 3.0 3.4 4.5 5.2
90 90.0 +0.8 1.8 2.2 2.6 2.9 3.4 3.5 4.1 5.3 6.1
110 110.0 +1.0 2.2 2.7 3.2 3.4 4.2 4.8 6.5 7.4
125 125.0 +1.2 2.5 3.1 3.6 3.8 4.5 4.8 5.5 7.4 8.3
140 140.0 +1.3 2.8 3.5 4.1 4.3 5.0 5.4 6.1 8.3 9.3
160 160.0 +1.5 3.2 3.9 4.5 4.9 5.6 6.2 7.0 9.4 10.6
180 180.0 +1.7 3.6 4.4 5.0 5.5 6.3 6.9 7.8 10.8 11.9
200 200.0 +1.8 4.0 4.9 5.6 6.1 7.7 8.7 11.8 13.2

DIMENSIONS OF QUICK COUPLED SPRINKLER SADDLES

Sr. No. Nominal Minimum Length of Pain Nominal Size of Threaded
Diameter Saddle without Male and Female Outlet
Female Couplers

1 40 75 12.70
2 50 75 12.7, 19.05
3 63 90 12.7, 19.05
4 75 105 12.7, 19.05
5 90 135 19.05, 25.04
6 110 200 25.04, 31.75
7 125 200 25.04, 31.75, 38.10
8 140 400 31.75, 38.10, 50.80
9 160 400 38.10, 50.80
10 180 400 38.10, 50.80
11 200 400 38.10, 50.80
 QUALITY IN EVERY WAY

WESTERN IRRIGATION SYSTEM PVT. LTD.

Plot No. D/11-A,B, Road-C, Lodhika G.I.D.C., Metoda, Dist. Rajkot (GUJ.)
Ph.: (02827) 287440/990, Cell : 99798 90440
Email : [email protected], Web : www.westernispl.com
CIN : U25209GJ2004PTC045233

D-U-N-S ® Number 86-371-3760