Scribd Logo
Upload

Welcome to Scribd!

  • Gelo HARDNESS REPORT For PB Sheet

    Uploaded by

    P NAVEEN KUMAR
    20 views1 page
    This hardness test report provides the results of microhardness tests conducted on samples of 0.20mm CuSn6 sheet material. The tests were performed according to ASTM E 384-17 using a load of 200gf and a diamond pyramid indenter. Three indentations were made on each of two samples and the average Vickers hardness values were determined to be 253.9 HV for sample 1 and 338.83 HV for sample 2.

    Original Description:

    FGRGR

    Original Title

    gelo HARDNESS REPORT For PB sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This hardness test report provides the results of microhardness tests conducted on samples of 0.20mm CuSn6 sheet material. The tests were performed according to ASTM E 384-17 using a load of 200gf and a diamond pyramid indenter. Three indentations were made on each of two samples and the average Vickers hardness values were determined to be 253.9 HV for sample 1 and 338.83 HV for sample 2.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as docx, pdf, or txt
    20 views1 page

    Gelo HARDNESS REPORT For PB Sheet

    Uploaded by

    P NAVEEN KUMAR
    This hardness test report provides the results of microhardness tests conducted on samples of 0.20mm CuSn6 sheet material. The tests were performed according to ASTM E 384-17 using a load of 200gf and a diamond pyramid indenter. Three indentations were made on each of two samples and the average Vickers hardness values were determined to be 253.9 HV for sample 1 and 338.83 HV for sample 2.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as docx, pdf, or txt
    of 1

    HARDNESS TEST REPORT

    CUSTOMER NAME & ADDRESS: Work order No. CMSS/20/1042


    Test Report No/ULR No. TC6850200000003172P
    Date of Receipt of test Item 09-07-2020
    GELO TECHNOLOGIES PVT. LTD.
    Date of testing 10-07-2020
    Plot #38, Phase II, IDA, Cherlapally,
    Hyderabad- 500 051.
    Issue Date of Test Report 10-07-2020
    Material CuSn6
    Sample Description 0.20mm CuSn6 sheet

    Identification of the sample 0.20mm CuSn6 sheet-1 & 2

    S.NO Test Details


    Machine Details HARDNESS TEST PARAMETERS
    Name: HARDNESS TESTER Test Procedure : ASTM E 384-17
    1 Srl. No: 3266 Load applied : 200gf(load)
    Calibration on Date : 08-12-2019 Type of Hardness : Microhardness(HV)
    Calibration Due Date : 07-12-2020 Indenter : 136⁰ Diamond Pyramid
    Location : On surface

    Observed Values in HV Avg


    Value in HV
    Identification
    S.ID of the
    sample
    Impression 1 Impression 2 Impression 3

    0.20mm
    1 252.4 254.3 255 253.9
    CuSn6 sheet-1
    0.20mm
    2 334.8 340.8 340.9 338.83
    CuSn6 sheet-2

    -------------------------------------------End of the test report----------------------------------------


    Verified by Witnessed by for CRYSTAL METALLURGICAL SERVICES & SOLUTIONS

    Format No. CMSS/FM/48(HN) Authorized Signature


    Rev No.00: DT: 01/01/2016 (P.NAVEEN KUMAR)
    Page 1 of 1

    You might also like