7 - Reflection of Light PDF
7 - Reflection of Light PDF
7 - Reflection of Light PDF
Light
aplustopper.com/selina-icse-solutions-class-9-physics-reflection-light/
APlusTopper.com provides step by step solutions for Selina Concise ICSE Solutions for
Class 9 Physics Chapter 7 Reflection of Light. You can download the Selina Concise
Physics ICSE Solutions for Class 9 with Free PDF download option. Selina Publishers
Concise Physics for Class 9 ICSE Solutions all questions are solved and explained by
expert teachers as per ICSE board guidelines.
Exercise 7(A)
Solution 1S.
The return of light into the same medium after striking a surface is called reflection.
Solution 2S.
Solution 3S.
(a) Plane mirror: Plane mirror is a highly polished and smooth reflecting surface made
from a clear plane glass sheet, usually thin and silvered with suitable reflecting abrasive
(for example, mercury) on one side. Once this pasting is done, then the glass becomes
opaque but due to the reflecting property of the abrasive, the plane glass sheet becomes
a plane glass reflector or a plane glass mirror.
1/28
(b) Incident ray: The light ray striking a reflecting surface is called the incident ray.
(c) Reflected ray: The light ray obtained after reflection from the surface, in the same
medium in which the incident ray is travelling, is called the reflected ray.
(d) Angle of incidence: The angle which the incident ray makes with the normal at the
point of incidence is called the angle of incidence. It is denoted by the letter i.
(e) Angle of reflection: The angle which the reflected ray makes with the normal at the
point of incidence is called the angle of reflection. It is denoted by the letter r.
Solution 4S.
2/28
Regular reflection occurs when a beam of light falls on a smooth and polished surface
and irregular reflection occurs when a beam of light falls on a rough surface. Since the
surface is uneven, from different points light rays get reflected in different directions and
give rise to irregular reflection.
Solution 5S.
Reflection of light from a plane mirror is regular reflection and reflection of light from
plane sheet of paper is irregular reflection of light.
Solution 6S.
Laws of reflection:
Solution 7S.
Laws of reflection:
3/28
Experiment to verify the laws of reflection:
Fix a white sheet of paper on a drawing board and draw a line MM1 as shown in figure.
On this line, take a point O nearly at the middle of it and draw a line OA such that ∠MOA
is less than 90o. Then draw a normal ON on line MM1 at the point O, and place a small
plane mirror vertical by means of a stand with its silvered surface along MM1.
Next fix two pins P and Q at some distance (≈5 cm) apart vertically on line OA, on the
board. Keeping eye on the other side of normal (but on the same side of mirror), see
clearly images P’ and Q’ of the pins P and Q. Next fix a pin R such that it is in line with the
images of pins P and Q as observed in the mirror. Next, fix one more pin S such that the
pin S is in line with the pin R as well as images P’ and Q’ of pins P and Q.
Draw small circles on paper around the positions of pins as shown in figure. Remove the
pins and draw a line OB joining the pin points S and R, which meets the surface of mirror
at O. The angles AON and BON are measured and recorded.
The experiment is then repeated for the angle of incidence ∠AON equal to 40 o, 50o, 60o.
From results, it is observed that angle of incidence is equal to the angle of reflection. This
verifies the first law of reflection.
The experiment has been performed on a flat drawing board, with mirror normal to the
plane of board on which white sheet of paper is being fixed. Since the lower tips of all
the pins also lie on the same plane (i.e., the plane of paper), it proves the second law of
reflection.
Solution 8S.
4/28
Solution 9S.
Solution 10S.
5/28
Solution 11S.
Solution 12S.
Solution 13S.
(b) The image is situated at the same perpendicular distance behind the mirror as the
object in front of it.
Solution 14S.
Solution 15S.
The interchange of the left and right sides in the image of an object in a plane mirror is
called lateral inversion.
Solution 16S.
The letters on the front of a ambulance are written laterally inverted, so that the driver of
the vehicle moving ahead of the ambulance reads these words laterally inverted as
AMBULANCE, in his rear view mirror, and gices side to pass the ambulance first.
Solution 17S.
Due to lateral inversion, , it becomes difficult to read the image of the text of a page
formed due to reflection by a plane mirror.
7/28
Solution 1M.
i=r
Solution 2M.
Solution 3M.
Solution 1N.
Solution 2N.
Solution 3N.
Solution 4N.
Solution 5N.
8/28
Distance between man and chart = 3m
Distance between man and mirror = 2m
Therefore, distance between chart and mirror = 5 m
Now, final image is formed on the mirror, which is at a distance of 2 m from the man,
therefore, the chart as seen by patient is (5m + 2m =) 7m away.
Exercise 7(B)
Solution 1S.
If two mirrors make an angle θ with each other and object is placed in between the two
mirrors, the number of images formed is n or (n – 1) depending upon n = 360o / θo is odd
or even.
Solution 2S.
Solution 3S.
For two mirrors kept perpendicular to each other, three images are formed for an object
kept in between them.
9/28
Solution 4S.
For two mirrors kept parallel to each other, an infinite number of images are formed for
an object kept in between them.
Solution 5S.
1. In barber’s shop for seeing the hairs at the back of head, two mirrors facing each
other are fixed on opposite walls at the front and back of the viewer.
2. In solar heating devices such as a solar cooker, solar water heater, etc., a plane
mirror is used to reflect the incident light rays from sun on the substance to be
heated.
Solution 1M.
Solution 2M.
In a barber’s shop, two plane mirrors are placed parallel to each other.
Solution 1N.
o 10/28
(b) Angle between the mirrors, θ = 60 o
Now, n = 360 o / θo = 360o / 60o = 6, which is even.
Hence number of images formed will be (n-1); i.e., 6-1 = 5 images
Solution 2N.
Exercise 7(C)
Solution 1S.
Solution 2S.
Distinction between concave and convex mirror: A concave mirror’s bulging surface is
silvered and reflection takes place from the hollow surface but a convex mirror’s inner
surface is silvered and reflection takes place from the bulging surface.
Solution 3S.
Pole: The geometric centre of the spherical surface of mirror is called the pole of mirror.
Principal axis: It is the straight line joining the pole of the mirror to its centre of
curvature.
Centre of curvature: The centre of curvature of a mirror is the centre of the sphere of
which the mirror is a part.
Solution 4S.
11/28
Solution 5S.
12/28
Solution 6S.
Focus of a concave mirror: The focus of a concave mirror is a point on the principal axis
through which the light rays incident parallel to principal axis, pass after reflection from
the mirror.
Focal length of a concave mirror: The distance of the focus from the pole of the concave
mirror is called its focal length.
Solution 7S.
13/28
Focus of a convex mirror: The focus of a convex mirror is a point on the principal axis
from which, the light rays incident parallel to principal axis, appear to come, after
reflection from the mirror.
Focal length of a convex mirror: The distance of the focus from the pole of the convex
mirror is called its focal length.
Solution 8S.
Incident ray is directed towards the centre of curvature because the ray is normal to the
spherical mirror, so ∠i = ∠r = O.
Solution 9S.
14/28
Solution 10S.
15/28
Solution 11S.
16/28
Solution 12S.
Two convenient rays that are chosen to construct the image by a spherical mirror for a
given object:
1. A ray passing through the centre of curvature: A ray of light passing through the
centre of curvature of a concave mirror or a ray directed in the direction of centre
of curvature of a convex mirror is reflected back along the same path after
reflection.
17/28
2. A ray parallel to the principal axis: A ray of light parallel to the principal axis,
after reflection pass through the principal focus in case of a concave mirror or
appears to diverge from it in case of convex mirror.
Solution 13S.
Solution 14S.
Solution 16S.
18/28
The image formed is virtual, erect and magnified.
Solution 17S.
19/28
Convex mirror always produces erect and virtual images. The images formed are
diminished, i.e. the size of the image is shorter than the size of the object.
Solution 20S.
(a) If the object is placed between the pole and focus of a concave mirror, the image
formed is magnified and erect.
(b) The image is virtual.
Solution 21S.
(a) If the object is placed at the centre of curvature of a concave mirror, the image
formed is of same size.
(b) The image formed is real and inverted.
Solution 22S.
Solution 23S.
When an object is moved from infinity towards the pole of mirror, the image formed
moves away from the mirror. The image formed is real and inverted.
Solution 24S.
In a convex mirror, the image formed is always virtual, upright and diminished. It is
always situated between its pole and focus, irrespective of the distance of object in front
of the mirror.
Solution 25S.
Solution 26S.
Solution 27S.
20/28
Solution 28S.
Solution 29S.
The image formed by a convex mirror is always between pole and focus. Hence, the
maximum distance that can be obtained in convex mirror is the focal length. For this
case the object has to be at infinity.
Solution 30S.
The maximum distance that can be obtained in concave mirror is infinity. For this case
the object has to be at focus.
Solution 31S.
To distinguish between a plane mirror, concave mirror and convex mirror, the given
mirror is held near the face and image is seen. There can be following three cases:
Case (i): If the image is upright, of same size and it does not change in size by moving the
mirror towards or away from the face, the mirror is plane.
(ii) If the image is upright and magnified, and increases in size on moving the mirror
away, the mirror is concave.
(iii) If the image is upright and diminished and decreases in size on moving the mirror
away, the mirror is convex.
Solution 32S.
21/28
1. It is used as a shaving mirror.
2. It is used as reflector in torch, head light of automobiles etc.
Solution 33S.
Solution 34S.
(a) The person’s face is between the pole and focus of the mirror.
(b) The image formed is erect, virtual and magnified.
Solution 35S.
A convex mirror is preferred as a rear view mirror because it has a wider field of view as
compared to a plane mirror of same size.
Solution 36S.
A convex mirror diverges the incident beam and always forms a virtual, small and erect
image between its pole and focus. Thus, a driver can see all the traffic approaching from
behind. This fact enables the driver to use it as a rear view in vehicles to see all the traffic
approaching from behind.
Solution 1M.
Solution 2M.
22/28
Solution 3M.
Concave mirror
Solution 1N.
Solution 2N.
Solution 3N.
The image is 30 cm in front of the mirror, 3 cm high, real, inverted and magnified.
Solution 4N.
The size of the image is equal to the size of the object if the object is placed at the centre
of curvature of a concave mirror.
24/28
Solution 8N.
A ray passing parallel to the principal axis passes through the focal point after reflection.
Hence, the focal length is 12 cm.
Solution 9N.
25/28
Solution 10N.
26/28
Solution 11N.
Solution 12N.
27/28
Solution 13N.
Solution 14N.
28/28