Professional Documents
Culture Documents
Scope of Use: Ceramic Whirl Gate For Foundries
Scope of Use: Ceramic Whirl Gate For Foundries
BASIC INFORMATIONS
SCOPE OF USE
The ceramic whirl gates, the so called slag traps,
are widely used mainly in steel and ductile cast iron foundries.
These parts of the gating systems are operated on the
principle of different volume density of melt,
slag and others impurities. The whirl gates are installed
in the casting routes. The molten metal from the casting route
is thrown inside he vessel. During this rotational motion
the particles float towards the melt surface
on the principle of different densities. Calm and cleaned metal
is led through the distribution channels into the mould.
www.ceramic.cz
OD60-120 WHIRL GATE
PRACTICAL EXAMPLE
The following photograph, showing one of
more whirl gates used in parallel for press
ram casting, weight of 140 tons, impurities
caught by the
is a good example of use of the whirl gate whirl gate
and its impact on quality.
Casting of this press ram cast resulted
in problems with slag leak. When the whirl d d1 k1 k2 d2 d3 d4 d5 d6 L L1 L2 h H
gate residues were examined, Type
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
a high quantity of slag and impurities was
OD60 60 110 9 8 60 73 77 170 120 179 131 34 356 580
found in exhausts. Taking in view
OD80 80 120 11 10 70 86 89 210 160 239 175 45 417 710
the problems during casting, employees of
OD100 100 140 10 9 80 100 104 250 200 315 225 50 519 879
the foundry were surprised pleasantly that
the cast is “sound” absolutely. OD120 120 165 10 9 80 100 104 250 200 315 250 42,5 537 919
www.ceramic.cz www.ceramic.cz
About us
Product line:
Ceramic gating system
Fireclay, high-alumina and special refractory ceramic bricks for ingot castings
Graphite and corundum stoppers and nozzles for ladle closing systems
Thermal insulating shapes
Refractory masses
www.ceramic.cz