Professional Documents
Culture Documents
Testing Printing Ink Vehicles and Components Thereof: Standard Guide For
Testing Printing Ink Vehicles and Components Thereof: Standard Guide For
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
D 6687
TABLE 1 Numerical Listing of Ink Vehicle Related Standards
ASTM Designation Volume Title
D 16 06.01 Terminology for Paint, Related Coatings, Materials and Applications
D 56 05.01 Test Method for Flash Point by Tag Closed Tester
D 86 05.01 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D 93 05.01 Test Method for Flash Point by Pensky-Martens Closed Cup Tester
D 154 06.03 Guide for Testing Varnishes
D 445 05.01 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
D 562 06.01 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using the Stormer Viscometer
D 611 05.01 Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D 971 10.03 Test Method for Interfacial Tension of Oil Against Water by the Ring Method
D 1200 06.01 Test Method for Viscosity by Ford Viscosity Cup
D 1259 06.01 Test Method for Nonvolatile Content of Resin Solutions
D 1310 06.01 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D 1331 15.04 Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D 1353 06.04 Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
D 1475 06.01 Test Method for Density of Liquid Coatings, Inks, and Related Products
D 1544 06.01 Test Method for Color of Transparent Liquids (Gardner Color Scale)
D 1545 06.03 Test Method for Viscosity of Transparent Liquids by Bubble Time Method
D 1639 06.03 Test Method for Acid Value of Organic Coating Materials
D 1725 06.03 Test Method for Viscosity of Resin Solutions
D 1963 06.03 Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C
D 2074 06.03 Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
D 2196 06.01 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield Type) Viscometer
D 2369 06.01 Test Method for Volatile Content of Coatings
D 3278 06.01 Test Method for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
D 3792 06.01 Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
D 3825 05.02 Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
D 3828 05.02 Test Method for Flash Point by Small Scale Closed Tester
D 3934 06.01 Test Method for Flash/No Flash Test- Equilibrium Method by a Closed-Cup Apparatus
D 3960 06.01 Practice For Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D 4017 06.01 Test Method for Water in Paints and Paint Materials by Karl Fischer Method
D 4040 06.02 Test Method for Viscosity of Printing Inks and Vehicles by the Falling-Rod Viscometer
D 4212 06.01 Test Method for Viscosity by Dip-Type Viscosity Cups
D 4287 06.01 Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
D 4302 06.02 Specification For Artists’ Oil, Resin-Oil, and Alkyd Paints
D 4359 06.01 Test Method for Determining Whether a Material is a Liquid or a Solid
D 4361 06.02 Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
D 4713 06.02 Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
D 4758 06.03 Test Method for Nonvolatile Content of Latexes
D 4942 06.02 Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
D 5010 06.02 Guide for Testing Printing Inks and Related Materials
D 5062 06.03 Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
D 5165 06.03 Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
D 5166 06.03 Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
D 5661 06.03 Test Method for Relative Solvency of Petroleum Oils by the PKP Method
D 5958 06.03 Practices for Preparation of Oil-Based Ink Resin Solutions
D 6038 06.03 Test Method for Determining the Compatability of Resin/Solvent Mixtures by Precipitation Temperature
D 6336 06.03 Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
D 6419 06.02 Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
E1 14.03 Specification for ASTM Thermometers
E 28 06.03 Test Method for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
E 70 15.05 Test Method for pH of Aqueous Solutions With the Glass Electrode
E 222 15.05 Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
E 230 14.03 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
E 691 14.02 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
2
D 6687
Testing in General
Color
Density
Heat Stability
Rheology
D 4361 06.02 Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
D 562 06.01 Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using the Stormer Viscometer
D 4287 06.01 High-Shear Viscosity Using a Cone/Plate Viscometer
D 445 05.01 Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
D 2196 06.01 Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield Type) Viscometer
D 4212 06.01 Viscosity by Dip-Type Viscosity Cups
D 1200 06.01 Viscosity by Ford Viscosity Cup
D 4040 06.02 Viscosity of Printing Inks and Vehicles by the Falling-Rod Viscometer
D 1725 06.03 Viscosity of Resin Solutions
D 1545 06.03 Viscosity of Transparent Liquids by Bubble Time Method
3
D 6687
TABLE 2 Continued
ASTM Designation Volume Title
Surface Tension
D 3792 06.01 Water Content of Coatings by Direct Injection Into a Gas Chromatograph
D 4017 06.01 Water in Paints and Paint Materials by Karl Fischer Method
D 4942 06.02 Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned
in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk
of infringement of such rights, are entirely their own responsibility.
This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and
if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards
and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the
responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should
make your views known to the ASTM Committee on Standards, at the address shown below.
This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,
United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above
address or at 610-832-9585 (phone), 610-832-9555 (fax), or [email protected] (e-mail); or through the ASTM website
(www.astm.org).