Professional Documents
Culture Documents
Technical Presentation From LJUNGSTROM On Advance Heat Recovery in Rotary Air Preheaters-WBPDCL PDF
Technical Presentation From LJUNGSTROM On Advance Heat Recovery in Rotary Air Preheaters-WBPDCL PDF
: WBPDCLC-HO/Technical Presentation
Dated: 11th September, 2018
Kind Attn : Mr. Indranil Dutta (Director – Projects) / Mr. Gautam Biswas (ED-OS)
Dear Sir,
Sub : LJUNGSTROM’s Technical Presentation on Advance Heat Recovery Technology in Rotary Air
Preheaters for considerable reduction in compliance cost
We from LJUNGSTRÖMTM, ARVOS group take this opportunity to introduce ourselves as OEM & OED (Original
Equipment Designer) for LjungstromTM Rotary Air Preheaters installed in your plants.
LJUNGSTRÖM has introduced AdvX™ Heat Recovery Technology to redefine the role of the combustion air preheater.
AdvX™ technology can save Indian Thermal Power Plant owners more than INR 140 Billion in compliance costs towards
meeting the stricter norms for SPM & SOx emissions and water consumption for coal-based thermal power sector,
issued by the Ministry of Environment, Forest and Climate Change (MoEFCC) in December 2015.
We would like to deliver a TECHNICAL PRESENTATION on our advanced AdvX™ heat recovery technology and advanced
heating element profiles (viz. DUN™) as detailed below
We request valued presence of senior executives from O&M, OS , R & M , PROJECT and Maintenance Team of various
plants from your end during the presentation. Request for your valued confirmation on the proposed date and time.
Sincerely yours,
Yours faithfully,
for Arvos Energy India Pvt. Ltd.
Cc to : Mr. Subrata Konar (GM-OS) / Mr. K. Dutta (Dy GM -OS) / Mr. K. Chakrabarti (Dy GM-Project) /
Mr. S. Sarkar (Sr. Manager-OS)
Arvos Energy India Private Limited Advant IT Park, Unit No. BC – 11 & 12 Tel. No. +91 120 2459 701, 706
(Formerly known as Oak Energy India Private Limited) Tower “A”, Plot No. 7, Sector 142 Fax No. + 91 120 2459 850
CIN: U74900UP2014FTC063490 Noida – 201 305, www.arvos-group.com
Gautam Buddha Nagar, Uttar Pradesh
ANNEXURE
Since 1920, LJUNGSTRÖM has been bringing to its customers the world’s most preferred power plant air preheaters and
gas-gas heaters. With over 15,000 installations worldwide, LJUNGSTRÖM® air preheaters and gas-gas heaters are more
widely used than any other brand of rotary regenerative heater in the power industry.
AIR PREHEATERS - Air Preheaters are heat exchangers recovering waste heat from boiler flue gas to preheat combustion
air and fuel. The use of Air Preheaters can improve boiler efficiency up to 20% and accordingly reduce emissions (more
than 2,000 tons of CO2/day for an 800 MW plant). Efficiency benefits have eliminated emissions of 50 billion tons of CO2
since 1923. The LJUNGSTRÖM® air preheater is more widely used than any other rotary heat exchanger in the steam
generating industry.
GAS-GAS HEATERS - Gas-Gas Heaters are heat exchangers used in conjunction with flue gas desulphurization (FGD)
systems to cool flue gas prior to FGD and then reheat flue gas prior to stack allowing (i) better FGD performance and (ii)
better dispersion of plume and particulate and avoiding acid rains. Ljungstrom® gas-gas heaters have an unrivaled track
record of the highest availability, with trouble-free operation. The LJUNGSTRÖM® gas-gas heater has an impressive
operating pedigree of more than 30,000,000 hours, with over 500 units installed globally.
We as LJUNGSTRÖM are always at the forefront of technology innovations and have introduced the following key new
technologies for thermal power generation:
A) AdvX™ Heat Recovery Technology - The intelligent AdvX™ Technology enhances the Ljungström® air
preheater operation with state-of-the-art, high-efficiency APH technology and X-ratio optimization to
recover additional waste heat from flue gas leaving the boiler. This additionally captured heat, through a
range of plant configuration options, can be utilized to simplify plant operations and enhance the plant’s
efficiency.
B) Advanced heating element profiles, like DUN8™ and DNF®, with 8% thermal performance gain over older
technology, superior cleanability, and reduced running costs
C) Unique manufacturing technologies providing improved quality and tolerances, enabling production of
higher performance profiles
D) Advanced sealing system with OptiFlex™ radial seal technology to reduce leakage
E) New basket designs with Thermal Guard™ basket to provide superior control of flow through heating
element while minimizing the weight
Arvos Energy India Private Limited Advant IT Park, Unit No. BC – 11 & 12 Tel. No. +91 120 2459 701, 706
(Formerly known as Oak Energy India Private Limited) Tower “A”, Plot No. 7, Sector 142 Fax No. + 91 120 2459 850
CIN: U74900UP2014FTC063490 Noida – 201 305, www.arvos-group.com
Gautam Buddha Nagar, Uttar Pradesh