This document provides safe work practices and control measures for various activities at a plant location. It identifies potential hazards such as trip, slip, and fall hazards from movement and photography. Fire hazards from open flames and radiation from mobile phones are also noted. For drone photography, restrictions on areas of movement and flying zones are specified to prevent hazards from electrical sparks, falling onto equipment, or unauthorized flying. Personal protective equipment and gas checks are required for various tasks.
This document provides safe work practices and control measures for various activities at a plant location. It identifies potential hazards such as trip, slip, and fall hazards from movement and photography. Fire hazards from open flames and radiation from mobile phones are also noted. For drone photography, restrictions on areas of movement and flying zones are specified to prevent hazards from electrical sparks, falling onto equipment, or unauthorized flying. Personal protective equipment and gas checks are required for various tasks.
This document provides safe work practices and control measures for various activities at a plant location. It identifies potential hazards such as trip, slip, and fall hazards from movement and photography. Fire hazards from open flames and radiation from mobile phones are also noted. For drone photography, restrictions on areas of movement and flying zones are specified to prevent hazards from electrical sparks, falling onto equipment, or unauthorized flying. Personal protective equipment and gas checks are required for various tasks.
DATE safe work practice & control SL Activity potential hazard measures
PPES Like coverall safety shoes
Trip slip hazard helmets always use in site
no open flame is allowed in the
1 movement of people fire hazard plant premises (like smoking ,lighter etc) visitors are not allowed for recording at height or climbing Fall from height on higher elivation
ensure LEL reading before
Flash light photography
before takeing photography
photography with mobile Signal radiation 2 always on the phone in camera airplane mode
Eletric spark during charging ensure there is sufficent charge
in phone while charging ensure LEL reading is 0 vedio recording should done strike with plant equipment outside the plant or safe area along
eletrical spark during while charging ensure LEL
battery changing reading is 0
fall of drone on any plant DRONE Movement will be
3 Using Drone Camera equipment restricted in process area.
battery should be repalced in
Eletrical flash safe area.
ensure drone is not moving on
unauthorised flying zone Flying Zone route map should be attached with JSA