TDS Auracast 100 India
TDS Auracast 100 India
Uses
Technical support
Auracast 100 is a high performance precast super plasticiser
intended for applications where reduction in cycle time and early Fosroc provides technical advisory service for on-site assis-
strength are required, and it has been developed for use in: tance and advice on mix design, admixture selection, evaluation
trials and dispensing equipment
Precast concrete elements like Hollow core slabs Block,
Cement Tiles ,Kerbstones , Edgings ,other items for garden Properties
landscape design ,Building blocks , bricks etc Appearance : Light yellow to Brownish
Concrete requiring high early strength without steam curing coloured Liquid
Low viscosity admixture suitable for precast elements Chloride Ion content : As per BS EN : 480-10-1997*
(Product contains a chemical
Suitable for concrete having cement replacements and low
which interferes in the
water cement ratio.
procedure as per IS 9103)
Provides high early strength without increase in cement * The uniformity parameters like specific gravity, pH, chloride
content or reduction in workability. Ideal for precast concrete content etc. will vary for specific customer requirements and
production mix design. Please refer our MTC issued for specific product
configuration for measuring our product parameters that will
Early de-shuttering will result in increased productivity.
be constantly and consistently administered.
Improves surface finish
Dosage
Minimizes damage due to early handling
The optimum dosage of Auracast 100 to meet specific require-
Better resistance to Carbonation.
ment should always be determined by trials using the materials
Reduces Shrinkage and Creep and conditions that will be experienced in use. The normal
Reduces efflorescence. dosage range is between 0.2 to 2.0 ltrs/100 kg of cementitous
material.
Standard Compliance
Dosage beyond Limits:
Auracast 100 complice to IS:9103:1999 as a Superplasticizer
and ASTM C 494 Type F and G depending on dosage. Dosage beyond limits can be used to meet particular mix re-
quirements in consultation with Fosroc technical department
Description
Effects of overdosing
Auracast 100 is a unique combination of the latest generation
super plasticisers, based on polycarboxylic ether polymer with Over dosage may cause delay in the setting time and segre-
long side chains and short main chains. This greatly improves gation.
page 1 of 2
Auracast 100
Auracast 100 has a minimum shelf life of 12 months provided Separate datasheets are available on these products.
the temperature is kept within the range of 2°C to 50°C.
Precautions
Fire
Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation specification
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
Fosroc Chemicals directly or indirectly arising from the use of its products whether or not in accordance with
any advice, specification, recommendation or information given by it.
(India) Pvt. Ltd.
Head Office telephone fax e-mail
Embassy Point, No. 150,
2nd Floor, Infantry Road, +91 80-42521900 +91 80-22281510 [email protected]
Bangalore 560 001,
Karnataka
Regional Offices
www.fosroc.com
page 2 of 2 INDIA/2020/0132/A