Professional Documents
Culture Documents
HIT-240HDE4 HIT-235HDE4 HIT Photovoltaic Module: Benefit in Terms of Performance
HIT-240HDE4 HIT-235HDE4 HIT Photovoltaic Module: Benefit in Terms of Performance
HIT-235HDE4
The SANYO HIT (Heterojunction with Intrinsic Thin layer) solar cell is made of a thin mono crystalline
silicon wafer surrounded by ultra-thin amorphous silicon layers. This product provides the industry‘s leading
performance and value using state- of-the-art manufacturing techniques.
Module temp. 75 °C
approx.
10% up
normalized output power
time
Current [A]
Warranted min. power (Pmin) [W] 228.0 223.3
Maximum over current rating [A] 15
Output power tolerance [%] +10/-5
Max. system voltage [Vdc] 1000
Temperature coeff. of Pmax [%/°C] -0.30
Temperature coeff. of Voc [V/°C] -0.109 -0.109
Temperature coeff. of Isc [mA/°C] 2.21 2.20
Voltage [V]
Note 1: Standard test conditions: Air mass 1.5, Irradiance = 1000 W/m ,
2
label
junction box
Voltage [V]
Weight: 16.5 kg Please consult your local dealer for more information.
Unit: mm
Section A-A Section B-B
Guarantee
Product: 5 years
Power output: 10 years (90% of Pmin), 20 years (80% of Pmin)
Full conditions are available on our website.
CAUTION! Please read the operating instructions carefully before using the products.
Due to our policy of continual improvement the products covered by this brochure may be changed without notice.
Stahlgruberring 4
81829 Munich, Germany Solar Division
Tel.+49-(0)89-460095-0
Fax.+49-(0)89-460095-170
10/09
http://www.sanyo-solar.eu http://www.sanyo.com/solar
email: [email protected] email: [email protected]