clx9350nd CLX 9250 PDF
clx9350nd CLX 9250 PDF
chapter 1 Precautions
1.1 Safety Warning …………………………………………………… 1-1
1.2 Caution for safety ………………………………………………… 1-2
1.3 ESD Precautions ………………………………………………… 1-5
1--1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1--2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1--3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
- When transporting/installing the equipment, employ fo our people and be sure to hold the lifting handles.
- Be sure not to hold the movable parts or units (e.g. the control panel, DADF) when transporting the
equipment.
- Be sure to use a dedicated outlet with 110V/220V pow wer input.
- The equipment must be grounded for safety.
ve heat, high humidity, dust, vibration and direct
- Select a suitable place for installation. Avoid excessiv
sunlight.
- Provide proper ventilation since the equipment emits a slight amount of ozone.
q p
- The equipment must be installed near the socket outlet and must be accessible.
-Be sure to fix and plug in the power cable securely afte er the installation so that no one trips over it.
-If you are moving the machine a short distance, you sh hould separate the finisher.
(e.g : same building through elevator)
-If you are moving the machine a long distance, you sh hould remove toner & imaging unit, lock scan carrier
& staple unit, tape and disassemble all trays. (e.g : moved
m by truck or so)
1--4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Certain semiconductor devices can be easily damaged d by static electricity. Such components are
commonly called “Electrostatically Sensitive (ES) Devices” or ESDs. Examples of typical ESDs are:
integrated circuits,
circuits some field effect transistors,
transistors and se
emiconductor “chip”
chip components.
components
The techniques outlined below should be followed to help
h reduce the incidence of component damage
caused by static electricity.
Caution >>Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
1--5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2. Product description
2.1 Specifications
General Specifications
Item CLX-9250 CLX-9350
Printing Speed (A4)
25 ppm/ 25 ppm 35 ppm/ 35 ppm
(Color / Mono)
FCOT (Color / Mono) < 10.6 sec / < 9.0 sec < 8.5 sec / < 7.5 sec
Warm-up Time < 45 sec from Power Save
Duplex Printing Speed Same as rated engine speed
60 ipm @ 300 dpi 60 ipm @ 300 dpi
Scanning Speed (A4)
40 ipm @ 600 dpi 40 ipm @ 600 dpi
Memory (Std / Max) 1 GB / 2 GB
HDD 250 GB
CPU PowerPC 800 Mhz PowerPC 1.0 Ghz
Optical • 600 x 600 dpi
2--1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Printer Specifications
Duplex printing speed Up to 25 ipm (A4), 25 ipm (Letterr) Up to 35 ipm (A4), 35 ipm (Letter)
Copier specifications
2--2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Scanner specifications
Internal: 30 bit
Color bit depth
External: 24 bit
Fax Specifications
Item CLX-9250 CLX-9350
Compatibility Super G3
2--3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Consumables
Model name
Product Life CLX-9250 CLX-9350
N.A / KOR ELS
X (Not
CLT-C606S CLT-C6062S 20K pages O
Available)
Cyan Toner
CLT-C607S CLT-C6072S 15K pages O O
X (Not
CLT-M606S CLT-M60
062S 20K pages O
Available)
Magenta Toner
CLT-M607S CLT-M60
072S 15K pages O O
X (Not
CLT-Y606S CLT-Y6062S 20K pages O
Available)
Yellow Toner
CLT-Y607S CLT-Y6072S 15K pages O O
*DDeclared
l d yield
i ld value
l iin accordance
d with
ith 6% pattern
tt n
** Image counts are based on one color on each page. If you print a document in full color (Yellow,
ages.
Magenta, Cyan, Black), the number of image is 4 ima
PM Kit
Pick up roller 1
CLX-PMK11C Retard roller 225,000 1 Tray 1,2,3,4, HCF
Forward roller 1
Pick up roller 1
CLX-PMK12C ADF roller 225,000 1 DADF
Retard roller 1
MP Pick up roller 1
CLX-PMK13C MP Retard roller 150,000 1 MP Tray
MP Forward roller 1
2--4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Paper Specifications
• MP Tray : Printer Default, Plain Paper, Thick Paper, Thin Paper, Bond Paper,
Paper Type Color Paper, Ca ardStock, Labels, Transparency, Envelope, Preprinted,
Letterhead, Rec cycled Paper, Cotton, Archive, Glossy
• High Capacity Feeder : Plaiin Paper, Thin Paper, Bond, Punched, Pre-Printed,
Rec
cycled, Letterhead,Thick paper
• Full supported Size : 140 X 140mm ~ 297 x 432mm (5.5" x 5.5" ~ A3/Ledger)
Original Size for DADF
• Auto-detected Size : A3,
A3 B44 B4 SEF
4, SEF, A4
A4, A4 SEF
SEF, B5
B5, B5 SEF
SEF, A5
A5, A5 SEF
National Kit
2--5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Option Unit
Stand CLX-DSK10T
HCF
CLX-HCF102 00 Sheets (LTR, A4)
2,00
(High Capacity Feeder)
Face-up output tray CLX-STK110 100 Pages, In 9250 series, this is optional.
1 GB Memory CLX-MEM300 1 GB
B
Fax Kit CLX-FAX150 G3, T.37/38, PC Fax SW, Fax Manual Softcopy
2--6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Working Table
1,250-sheet standard finisher (CLX-WKT000)
(CLX FIN40S)
(CLX-FIN40S)
Fax kit Fax multi-line kit Stand Optional tray High capacity feeder
(CLX-FAX150) (CLX-FAX250) DSK10T)
(CLX-D (CLX-PFP000) (CLX-HCF102)
FD
D I kit Expansion memory module 1G
(CLX
X-KIT10F) (CLX-MEM300)
2--7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Front view 1
2--8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Front view 2
2--9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Rear view
2-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Inner view
2-1
11
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2-1
12
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2-1
13
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2-1
14
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Layout 18
17
1
16
15
3
14
4
5
13
6 12
8 11
10
Paper Path
DADF
D
path
Face up
exit
Finisher
path
Simplex
path Duplex
path
2-1
16
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Part
Ref. Description Controller PCB Relative Error Code
Number
S1 PBA SENSOR ACR 2A
JC32-00012 S2-3114 / S2-3115
S2 PBA ENCODER ITB JC92 02160
JC92-02160
0A -
S3 SENSOR-HUMIDITY JC32-00005
5A A3-3211 / A3-3212
S4 PBA SENSOR ACR JC32-00012
2A S2-3114 / S2-3115
PBA-ENGINE
S5 PBA SENSOR ACR JC32-00012
2A S2-3114 / S2-3115
S6 SWITCH FRONT COVER JC32-00012
2A CLX-9350ND S2-4210
: JC92-02129A
S7 PHOTO INTERRUPTER
PHOTO-INTERRUPTER 0604 00139
0604-00139
93 -
S8 PHOTO-INTERRUPTER 0604-00139
93 CLX-9250ND -
: JC92-02239A
S9 PHOTO-INTERRUPTER 0604-00139
93 -
S10 PHOTO-INTERRUPTER 0604-00139
93 -
S11 PHOTO-INTERRUPTER 0604-00139
93 M1-3122 / M2-3222
S12 SENSOR-PAPER SIZE JC32-00013
3A M1-4111
2-1
17
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Part
Ref. Description Controller PCB Relative Error Code
Number
PBA-ENGINE
S13 SENSOR-PAPER SIZE 3A
JC32-00013 M1-4211
CLX-9350ND
: JC92
JC92-02129A
02129A
Part
Ref. Description Controller PCB Relative Error Code
Number
S20 SENSOR-DEVELOPER JC32-00010
0A PBA-ENGINE C3-2422
S21 SENSOR-DEVELOPER JC32-00010
0A CLX-9350ND C3-3422
S22 SENSOR-DEVELOPER JC32-00010
0A : JC92-02129A C3-4422
CLX-9250ND
S23 SENSOR DEVELOPER
SENSOR-DEVELOPER JC32 00010
JC32-00010
0A C3 5444
C3-5444
: JC92-02239A
2-1
18
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Part
Ref. Description Controller PCB Relative Error Code
Number
S31 PHOTO-INTERRUPTER 0604-00139
93 M3-2220
S32 PHOTO-INTERRUPTER 0604-00139
93 PBA-ENGINE M3-1313
S33 PHOTO-INTERRUPTER 0604-00139
93 M3-1313
CLX-9350ND
S34 PHOTO-INTERRUPTER 0604-00139
93 : JC92-02129A M2-1333
2-1
19
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Part Controller
Ref. Description Relative Error Code
Number PCB
M3-1313
S38 PHOTO-INTERRUPTER 01393
0604-00
M3-1314
S39 PHOTO-INTERRUPTER 0604-00
01393 -
S40 PHOTO-INTERRUPTER 0604-00
01393 -
S41 PHOTO-INTERRUPTER 0604-00
01393 -
S42 PHOTO-INTERRUPTER 0604-00
01393 -
S43 PHOTO-INTERRUPTER 0604-00
01393 C5-1551
S44 PHOTO-INTERRUPTER 0604-00
01393 M2-2251
S45 PHOTO-INTERRUPTER 0604-00
01399 PBA-ENGINE -
CLX-9350ND M1-1615
S46 PHOTO-INTERRUPTER 0604-00
01381 : JC92-02129A M2-12133
M2-2313
S47 VR-SLIDE 2102-00
01020 CLX-9250ND -
: JC92-02239A
S48 PHOTO INTERRUPTER
PHOTO-INTERRUPTER 0604 00
0604-00
01393
M1-5612
S49 PHOTO-INTERRUPTER 0604-00
01381
S50 PHOTO-INTERRUPTER 0604-00
01393 M2-1114
S51 PHOTO-INTERRUPTER 0604-00
01393 M1-4111
S52 PHOTO-INTERRUPTER 0604-00
01393 M1-5112
S53 PHOTO-INTERRUPTER 0604-00
01381 S2-4A10
S54 PHOTO-INTERRUPTER 0604-00
01393 M2-1123
S55 PHOTO-INTERRUPTER 0604-00
01393 M1-4211
2-2
20
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2.4.1 Overview
The following diagrams display the positions of the paper path rollers.
2-2
21
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Face Up
Face down trayy p
paper
p
full detection Face up jam detection
ITB
Duplex jam detection2
T2
Tray2
y paper
empty detection
Tray2 lift
motor Tray2 transport detection
Tray2 paper
size detection Tray2 upper limit detection
Tray2 papeer remaining
quantity dettection
2-2
22
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2-2
23
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2.4.2 Components
2 6 19 Roller fuser
20 Sensor fuser out
12
7 21 Roller exit
3 22 Roller face down exit
13
23 Actuator face down bin
8 full
4
24 Sensor duplex return
25 Roller duplex return
26 Roller face up exit
2-2
24
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2.4.3 Functions
R t dR
Retard Roller
ll (paper
( tray
t and
dbbypass feed)
f d)
This roller is placed against the feed roller. When two sheets of paper or more are transported from the
d roller is heavier than the frictional force between the
pickup roller, the load of the torque limiter of the retard
sheets. As a result, the retard roller is stopped and the e lower paper does not advance any further. When
only one sheet is transported from the pickup roller, the retard roller rotates following the feed
roller.
Conveying
y g Roller (p
(paper
p tray
y and bypass
yp feed
d))
This roller transports the paper sent from the feed rolle
er to the registration roller.
Registration Roller
Paper transported from the transport roller is pushed against
a the registration roller which aligns the leading
edge of the paper. Then, the registration rollers rotate
e to transport the paper to the transfer unit.
Feed Sensor
This sensor detects if the leading edge or trailing edge
e of the paper has passed the feed roller. It also
detects jamming such as missfeeding.
Registration Sensor
This sensor detects that the leading edge of the paperr has reached the registration roller and that the
trailing edge of the paper has passed the registration roller.
r
2-2
25
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The paper trays consist of the Main trays, Optional trays (DCF,HCF), and one Multi-Purpose (MP) tray.
The MP tray is located on the right side of the machinee and allows feeding of specialty media stock,
envelopes,
p , and custom size paper.
p p
Paper size is set using the Size Guides in each tray. Adjust
A the Front, Rear, and End Guides to match the
paper size.
Specification
• Structure : Paper tray Type, Auto Paper Size
minum)
• Capacity : 520 Sheets ( 80g/㎡ standard Xerox Prem
• Paper :
-. Plain paper : A5, A4, A3, B5, B4, Letter, 11"×17
7"(Ledger), Statement, Legal
-. Special Paper : 12"×18", Label, Card stock
stock [170~216 g/㎡ : 350 sheets)
(Label : 50 sheets, Thick Cards
• Weight : plain paper 60 ~ 216g/㎡
or
• Plate knock up Lift type : Lift Motor + Up Limit Senso
2-2
26
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
When pickup takes place, the pickup roller moves dow wn to come into contact with the surface of the paper.
The pickup roller moves down when the pickup soleno oid is activated. The forward roller and the retard
roller serve to make sure that a single sheet of paper is moved to the paper path,path and the paper is moved
as far as the registration roller by the work of the vertic
cal path roller. The following is a diagram of the
pickup roller:
Forward Roller
Retard Roller
Actuator-Empty Sensor
Pick Up Roller
2-2
27
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The registration roller is driven by the registration multti motor. The registration clutch (CL6) is located
between the registration roller and the registration mullti motor, and it controls ON/OFF of the registration
roller in order to match paper and an image on the dru um at the predetermined registration point
point.
Sha
aft-regi
Regi roller
■ Specification
1) Skew in Simplex
-. Top Skew : 1.5 mm
-. Side Skew : 2.0 mm
2) Dog Ear, Trees, Nicks, Wrinkling
-. Special Media : 1/500
3) Margin
F : 4.23 ± 2.0 mm )
-. Top Margin : 4.23 ± 1.5 mm ( Tray3, 4, HCF
-. Side Margin : 4.23 ± 1.5 mm ( Tray3, 4, HCF
F : 4.23 ± 2.0 mm )
-. Duplex Top Margin : 4.23 ± 2.0 mm ( Tray3, 4, HCF : 4.23 ± 2.0 mm )
4 23 ± 2.0
-. Duplex Side Margin : 4.23 2 0 mm ( Tray3
3 4
3, 4, HCF : 4 23 ± 2.0
4.23 2 0 mm )
2-2
28
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
MPF Clutch
Cl t h
MPF Pick up roller
Empty sensor
Long paper sensor
MPF
Tray
Specification
• Tray capacity : 100 sheets ( 80g/㎡ standard Xerox Preminum
P )
• Media Size : Max 12.6”×17.7” (320.6×450㎜) / Min
n 3.87”×5.8” (98×148㎜)
• Media weight : Plain paper 60 ~ 253g/㎡
g speed
• Feeding p : 30 pp
ppm ((CLX-9350ND),
), 20 pp
ppm ((CL
LX-9250ND)) in Letter/A4 LEF ((Long
g Edge
g Feeding)
g)
• Auto size sensing : A6 SEF, Statement SEF, B5 SEF, A4 SEF, A5 LEF, B4 B5(JIS) LEF, 11x17,
LTR(Letter) LEF, A3, A4 LEF
Paper Separation
When the by-pass paper detection [A] sensor detects paper and the machine gets a by-pass printing job,
nto the top of the paper stack on the by-pass tray.
the by-pass solenoid [B] drops the pick-up roller [C] on
After that, the pick-up roller moves one
sheet of paper to the feed roller.
2-2
29
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
M C
Paper path
This machine uses four Imaging units, and four laser beams
b for color printing. Each Imaging unit consists
of a Drum unit and Development unit
unit. Each Drum unitt has an OPC drum,
drum Charge Scorotron,
Scorotron Eraser and
Cleaning blade. From the left, the Imaging unit station
ns are: yellow, cyan, magenta, and black.
The OPC drum [A] is charged with a negative voltage by the Charge Scorotron and is exposed by the light
from the LSU (Laser Scanning unit) [B]. The light prod duced by the laser creates a latent image by
discharging on the surface of the OPC drum. The neg gatively charged toner is attracted to the latent drum
image due to an electric field. The toner (real image) on o each OPC drum is moved to the transfer belt by
the positive bias applied to the first transfer roller [C]. All four toners (color image) are transferred to the
paper by
b a positive
iti charge
h applied
li d tto th
the second d ttrans
sfer
f roller
ll [E].
[E]
Process Steps
3. Development: This machine uses a dual-compone ent development system. The magnetic roller carries
negatively charged toner to the latent image on the
e drum surface. This machine uses four independent
imaging units (one for each color).
4. Transfer:
posite the OPC drums transfer toner from the drums to
a. First transfer: The first transfer rollers opp
the transfer belt. Four toner images are superr-imposed onto the belt.
b. Second transfer: The transfer roller transferrs the toner from the transfer belt to the media.
2-3
30
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6. Quenching for OPC drum: Quenching is done by illuminating the whole area of the drum with the laser
at the end of every job.
7. Cleaning and quenching for transfer belt: The clea aning brush and blade clean the belt surface. The
grounding roller inside the transfer belt unit remov
ves the remaining charge on the belt.
8. ID sensors: The ID sensors detect the density of ID D sensor patterns on the transfer belt. Three ID
sensors for the line position adjustment (front, cen
nter, and rear) and process control.
2-3
31
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Each Imaging Unit consists of the OPC drum unit and the development unit. The OPC drum unit has an
OPC drum, Charge Scorotron, Eraser, and Cleaning blade.
b The development unit has a magnetic roller,
two mixing augers, developer, and a TD sensor. Fourr color Imaging Units contain identical components
(drum unit, development unit, etc.), however, the Imag
ging Units are not interchangeable.
The developing gap between a drum and the correspo onding magnetic roller cannot be adjusted because
they are assembled as one Imaging unit at the factory.
The CRUM chip in the image unit stores the data abou
ut the Imaging unit.
OPC
C Drum
Magnetic Roller
Cleaning blade
Eraser
2-3
32
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Each color OPC and Mag Roller is driven by each colo or motor. The OPC Drum and Mag roller are supplied
with power from the coupling. A micro clutch in the drive path can cut the power to the Mag roller. This
means that the Mag roller can be stopped while the OP PC is in operation.
operation
Phase sync for each OPC runout prints the pattern on the ITB and is adjusted by the data automatically.
Y Drum phase
e sensor
Drum-Y
Drum-M
D
Drum-C
C
Drum-K
K
Drive motor BLDC
C
Coupling O
OPC
C
Gear-Drive OPC
Coupling Deve
2-3
33
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Immediately after the printer power turns on, recovers from the energy saver mode, or the front door is
opened and closed, the printer executes the drum pha ase adjustment if one of the following conditions
occurs:
Also, when the printer detects a shift in the drum positions during the line position adjustment, the printer
executes the drum phase adjustment.
2 5 2 4 Development
2.5.2.4 D l t
[A] Developmen
nt Roller
[C] TD [B]
Sensor Mixing
Auger
[[B]] Mixing
g Auger
g
This printer uses a dual-component development syste em and has four imaging units (which are included in
the drum units; one for each color). Each new unit con ntains 330g of magnetic toner carrier. The developer
in each unit is supplied to the magnetic roller [A] by the
e two mixing augers [B] and is attracted onto the
surface of the roller. The diameter of the magnetic roller is 18 mm.
Each imaging unit has a TD(Toner Developer) sensor [C]. The TD sensor [C] in the imaging unit is used for
maging unit is equipped with a CRUM in which some
controlling the operating range of toner density. The im
information about the imaging unit is stored.
2-3
34
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
• During TD calibration
• During development.
[B] Filter
[A] Auger
2-3
35
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The toner is moved from the four drums to the ITB by the four image transfer rollers. This is done with one
rotation of the ITB (four toner images are super-impos sed onto the belt). The arrow above the C and M
drums on the diagram shows the direction of ITB rotation. The ITB drive roller then moves the four-color
toner image from the transfer belt to the paper. The paper transfer roller is an idle roller. The cleaning unit
aning blade and tension roller. The used toner
in the transfer unit cleans the belt surface with the clea
collected from the belt is transported to the toner collection bottle. There are three ACR sensors. Two of
th
them are for
f the
th line
li position
iti adjustment.
dj t t The
Th other
th is
is for
f process control.
t l Th
There iis a cleaning
l i EEPROM att
the Cleaning Unit and there is an ITB EEPROM in the main frame. It is therefore, possible to check the
status of the cleaning unit and ITB.
2
8
7 11
4 1
3
6
9
Y M C K
5
10
1 Image Transfer Be
elt (ITB)
2 Image Transfer Ro
oller (Primary transfer)
3 ITB Drive
D i Roller
R ll
4 Tension Roller
5 Rotation Encoder
6 M
Cleaning EEPROM
7 Cleaning
g Blade
8 ACR Sensor
9 oller
Paper Transfer Ro
2-3
36
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The ITB drive motor [A] drives the image transfer belt [B] and the Cleaning unit by using gears and the ITB
drive roller [C]. The speed of ITB drive depends on the process line speed.
[B]
[A]
[C]
[C
C]
[A]
[B]
2-3
37
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The ITB-cleaning unit removes toner (during printing) and a the ACR sensor patterns (during process control
or automatic
t ti line
li position
iti adjustment)
dj t t) on the
th belt.
b lt Belt
B ltt cleaning
l i iis completed
l t d while
hil th
the iimage ttransfer
f b belt
lt
makes one rotation. The ITB drive motor drives the IT TB-cleaning unit.
The cleaning blade [A] in the cleaning unit always conttacts the image transfer belt [B], and removes used
toner from the belt. Then the toner collection auger [C C] transports the toner towards the waste toner
container.
The Film [D] on the Cleaning Unit protects against toner contamination. The driving power from the drive
roller is transferred to the tension roller [E]. The Gear [F] drives the Gear [G].
[E]
[B]
[D]
[C]
[A]
[F]
[C]
[G]
[E]
Other Side
2-3
38
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The heating roller is made of a thin steel pipe to quicklly increase the temperature of the fusing belt. The
fusing roller and pressure roller are made of soft silicone rubber, which flatten slightly, increasing the fusing
nip. These rollers do not contain a fusing lamp. The heating
h roller contains two fusing lamps (one lamp,
center heating lamp, heats the center and the other lam
mp, side heating lamp, heats the ends in the axial
direction). NC sensors (non-contact type thermistors), located near the center and the rear end of the
heating roller, control the temperature of the fusing belt just above the heating roller at the center and the
ends, respectively.
Two NTC thermistors and two thermostats, located at the center and the front end, protect the fusing
perature is normally controlled by turning on and off
system from overheating by the heating lamps. Temp
the center heating lamp and side heating lamp, respec
ctively, corresponding to predetermined target
temperatures.
Fusing Belt
Heat Roller
Thermistor
(0.5mm-1.0mm
distance)
Thermostat
Fuser Roller
Pressure Roller NC Sensor
Halogen Lamp
2-3
39
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
These halogen lamps heat the heat roller. The center heater lamp (LAMP1) and the side heater lamp
ach heater lamp has its coil in a different location. The
(LAMP2) are lit alternately to heat the heat roller. Ea
coil of the center heater lamp (LAMP1) is in the centeer, those of the side heater lamp (LAMP2) are on both
sides. The heater lamps are fixed inside of the heat roller so that they will not rotate separately.
2. Heat roller
3. Fuser belt
The fuser belt couples the heat roller with the fuser ro
oller. It conducts heat from the heat roller to the fuser
roller and paper. The thin fuser belt reduces warming up time and mode changing time. To prevent the
he fuser belt is fluorinated.
fuser belt from adhering to the toner, the surface of th
4. Fuser roller
The fuser roller is pressed against the pressure rollerr with the fuser belt in-between. By this pressure
between the fuser roller and pressure roller, the heatt conduction to the paper is enhanced so that toner
belts easier.
easier The melted toner is soaked into the pap per To improve the fusing ability,
per. ability a fuser roller with
soft rubber is employed to expand the nip width.
5. Pressure roller
NC sensors detect the surface temperature of the center and the rear end of the fuser belt/ heat roller
ed at the center and front end, protect the fusing
which controls the heater lamps. Thermistors, locate
system from overheating.
7. Thermostat
2-4
40
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The fusing/paper exit motor [A] drives the fuser roller [C] through the gear train. The pressure roller [B] is
driven by pressure with the fuser belt [E] and roller [C]. The heat roller [D] is driven by pressure with the
fuser belt [E]
[E].
E Motor [A]
Exit
2-4
41
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
When the main switch turns on, the CPU turns on the fusing lamp. The lamp stays on until the NC sensors
detect the standby temperature
temperature. Then the CPU raisess the temperature up to the printing temperature
temperature.
Lamp 1(700W) :
Center heating
Thermistor1
Thermistor2
NC Sensor2
NC Sensor1
stat 1
Thermos Thermostat 2
Lamp 2(600W) :
Side heating
Overheat Protection
• Two thermostats for the heating roller get into line with the common ground line of the fusing lamp.
• If one of the thermostat temperatures becomes highe
er than 170°C, it opens and cuts power to the fusing
lamp. If the other thermostat temperature becomes higher
h than 170°C, it also opens and cuts power to
the fusing lamp.
2-4
42
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 LD PBA
2 P/Mirror Motor
3 F1 Lens
K: Scan direction M: Scan direction
1 1 4 F2 Lens
K C M Y 5 Skew Adjust
6
Assy
3 2 3 2 5 3
6 Shutter &
Shutter Drive
Motor Assy
7 Joint PBA
2-4
43
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
K C M Y
[A]
The laser beam from the LSU is placed at intervals of 104mm for each color. All colors use the same
polygon motors. F2 Lens [A] determines the slope of the
t primary scanning line and the image position of
the secondary scanning direction. This is adjusted at the
t factory. The primary scanning line slope by the
SET difference is adjusted by Skew adjustment in the LSU. Reflecting mirrors [C], [D] for each color adjust
the primary scanning. The LSU has 2 types depending on printing speed. The difference between the two
printer models is shown in the table below:
2-4
44
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The machine has four beam detector sensor boards (B BD PBA). There is one at each corner of the laser
optics-housing
optics housing unit. The four BD boards detect the folllowing:
4 beams are detected by the BD PBA at the scanning start point and create the horizontal sync (Hsync)
ng direction for each color. Black (& Magenta) and
signal. The following diagram shows the data scannin
Cyan (& Yellow) use the same polygon motors scanning in opposite directions.
[C
C] [D]
[A] [B]
2-4
45
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
During automatic line position adjustment, line patterns are created eight times on the transfer belt. The
p
spaces between the lines ((KK,, CC,, MM,, YY,, KC,, KM,, KY)) are measured byy the front,, center,, and rear ID
sensors. The controller takes the average of the spac ces, then adjusts the following positions and
magnification:
The transfer belt-cleaning unit cleans the transfer belt after the patterns are measured.
Front C
Center Rear
KK K
KC
K
CC C
KM
C
MM M
KY
M
YY Y
2-4
46
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The adjustment of the sub-scan line position for CMY is based on the line position for K (color registration).
The printer measures the gaps between the lines of ea ach color in the pattern on the transfer belt. When the
gaps for a color are not correct, the printer moves the image of the color up or down the sub scan axis. To
do this, it changes the laser write timing for that color.
When the printer detects that the image is out of positiion in the main scan direction, it changes the laser
write start timing for each scan line.
2 7 4 3 Magnification
2.7.4.3 M ifi ti Adj
Adjustment
t t fforr CMY
The adjustment of the skew for CMY is based on the line position for K.
Line position adjustment can be turned on or off. However, it is normally recommended to turn on this
f nction
function.
ettings. These settings include the following:
Line position adjustment timing depends on several se
• ∆t = Elapsed Time.
• ∆T = Temperature change of LSU (Laser Scanning g Unit) between the temperature of the previous line
• position adjustment and the current temperatture.
• Pages = Total printed pages after previous line pos
sition adjustment.
Line position adjustment starts automatically after warming up when the power is turned on, or when the
printer recovers from energy saver mode. Line position n adjustment is automatically performed when one of
these conditions occurs:
2-4
47
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Line position adjustment interrupts printing and then sttarts automatically when one of these conditions
occurs when the machine checks at the sheet interval. Line position adjustment is automatically done
when one of these conditions occurs:
Line position adjustment starts automatically when waste toner container is not-installed/installed. This is
anging Imaging Unit. When the machine detects a
triggered after removing the Imaging Unit or when cha
new Imaging Unit, line position adjustment is automatically performed.
Skew adjustment assembly [A] consists of the step mo otor, worm, and worm gear. At ACR, it detects and
adjusts the scanning line slope automatically. The F2 lens positioning motors [A] for magenta, cyan, and
yellow
ll adjust
dj t th
the angle
l off th
the F2 llens [B] respectively,
ti l based
b d on the
th F2 llens position
iti for
f black.
bl k This
Thi
mechanism corrects main scan skew.
[B]
[A]
[B]
[C/M/Y]
2-4
48
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The laser optics housing unit is equipped with a shutteer. As a result, toner and dust do not fall on the glass
of the laser optics housing. The shutter motor [A] mov ves the shutter [B] in the direction of the arrow with
the idle gear [C] (open = black arrow direction
direction, close = white arrow direction)
direction).
When detecting the printing job, the drive motor [A] spins and it turns the idle gear [C] drive. The rib below
the idle gear moves from the photo sensor [D] and ma akes the shutter move to position. When the printing
job is finished, the drive motor [A] works until the rib be
elow the idle gear [C] blocks the photo sensor [D]
and the shutter is switched off.
• Shutter on: Shutter door is opened for Printing annd the rib below the idle gear [C] does not block the
photo
h t sensor [D].
[D]
• ow the idle gear [C] blocks the photo sensor [D].
Shutter off: Shutter door is closed and the rib belo
[B]
[A]
[C] [D]
2-4
49
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2 8 1 Drive Motors
2.8.1
The following diagram displays the locations of the printer drive motors.
6
2
Left
Side
10
3
9
4
8
7
The following table list the descriptions for the tagged drive locations.
Related
No. ITEM Type Qtty Function
error
2-5
50
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Related
No. ITEM Type Qtty Function
error
E CLT
E-CLT 2 MP / Dup
D driving
d i i control
t l -
E-CLT
C 2 Pick-Up 1,2
1 2 driving control -
Y : A1-5213
Toner supply Toner transfer in Toner Bottle M : A1-5313
6 DC 4
gear box driving Duct C : A1-5413
K : A1-5513
Y : A1-2211
M : A1-2311
BLDC 4 OPC/DEVE
C : A1-2411
K : A1-2511
OPC / DEVE
Y : A1-2212
7 M : A1-2312
E-CLT 4 DEVE control
C : A1-2412
K : A1-2512
ITB BLDC 1 ITB -
2-5
51
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Front View
BLDC
(ITB)
Rear View
ITB Connector
T1 HV T1 Dis/Engage
ITB Coupling
Coupling
OPC Coupling
MagR HV G
Grid HV
Scoro
otron HV
Imaging unit
Connector
Deve (Auger)
Coupling
Information
SEC-CODE : JC93-00044A
P tN
Part Name : DRIVE
DRIVE-MAIN
MAIN
2-5
52
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Feed
Pick-up
Micro- Coupling
Cluttch
Feed
Pick-up
Information
SEC-CODE : JC93-00065A
Part Name : DRIVE-PICK UP
Power Train Pick-up drive : Same H-Step motor is raising 2 tray by e-clutch
2-5
53
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Dupllex Drive
Reg
gi Drive
MP Drive
Information
SEC-CODE : JC93-00066A
Part Name : DRIVE-MP REGI
H-Step
H Step Belt Pulley Gear Regi driving
Regi.
Pulley Gear Be
elt Pulley Gear E-Clutch DUP driving
2-5
54
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
BLDC
Micro-Clutch
Fuser Drive
Gear in Fuser
SEC-CODE : JC93-00057A
Part Name : DRIVE EXIT
1. BLDC FUSER A/B FUSER IDLE B FUSER IDLE A FUSER Fuser driving Roll
2-5
55
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
Step (PM) Worm GEAR SHUTTER IDLE A GEAR SHUTTER IDLE B LSU Shutter Driving
Information
SEC-CODE : JC93-00067A
Part Name : DRIVE
DRIVE-WTB
WTB
WTB Gear
Step (PM) Worm GEAR WTB RDCN GEAR WTB IDLE A WTB Leveling driving
2-5
56
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Bottle Coupling
Duct Coupling
Information
SEC-CODE : JC31-00124A
Part Name : MOTOR GEARED-T_SUPPLY
2-5
57
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
291S
2.9.1 Scanner S
System
t O
Over view
i
During the scanning process, the surface of a docume ent is exposed to direct light. The light reflected from
the paper is led through mirrors, a lens, and a slit to a CCD where optical-to-electrical conversion is
performed, converting the optical image data into an electrical
e (analog) signal. This analog signal is
changed to a digital signal, which then undergoes vario ous corrective processes necessary for image
formation After that,
formation. that arithmetic operations are perform med on the digital signal,
signal which is then transmitted to
the data writing processor.
In this printer, a reduction-type CCD for color processiing is used. How this CCD differs from black and
white CCDs is that its devices are arranged in 3 lines and
a covered with color filters (Red, Green, and Blue).
These lines are composed with 3-line color devices an nd a black-and-white device with no filter.
2-5
58
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 DADF glass
1. l
The DADF glass is used when a document is read by the Automatic Document Feeder. The document is
es on the Document through this glass.
placed on this glass. The light from the Xe-lamp shine
The document is transported to the DADF glass by the e Dual Automatic Document Feeder (DADF), and
then the transported documents are read under the DA ADF glass by the carriage.
2. FR(Full Rate)-Carriage
FR-Carriage consists of the Xe-lamp (EXP), reflector, mirror-1, etc. It is driven by the scan motor
(HB Step Motor) and scans the document located on thet glass.
Mirror-1
Xe-Lamp
Reflector
• Xe-lamp
al document on the glass. (One 26 W xenon lamp)
This lamp is the light source to expose the origina
• Reflector
e Xe-lamp to the surface of the
This is a plate to efficiently direct the light from the
Document on the glass.
• Mirror-1
Mirror 1
This mirror directs the light reflected from the Document to the mirror-2 (described later).
2-5
59
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. HR(Half Rate)-Carriage
HR-Carriage mainly consists of the mirror-2, mirror-3, etc., and it directs the reflected light from the mirror-1
e is driven by the same scan motor as that of the FR-
through the mirrors-2 and -3 to the lens. This carriage
carriage at half the scanning speed of the FR-carriagee (The scanning distance is also half that of the FR-
carriage).
i )
Mirror-2
Mirror-3
4. Lens unit
5. CCD board
This is a board to perform image correction, such as shading correction and Image Enhancement.
2-6
60
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
R3 R4
R6
R1 R2
R5
R7
2-6
61
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2-6
62
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 Pick
1. Pi k up motor
t drive
d i section
ti
This motor picks up an original and transfers it to the registration roller. When the leading edge of the
original document reaches the registration roller, the pick-up motor stops and the original document is
moved to the next position on the DADF roller.
The scan motor transports the original to the reading area. When this motor rotates in optimum
conditions,, an optimum
p image
g can be p printed. Soo,, the scan motor rotates continuallyy during
g scan
operation.
Pick up motor
m drive section
Ex
xit motor drive section
2-6
63
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The pick-up motor provides the driving power to the DA ADF roller by using a belt and a gear. The DADF
and pick-up rollers are connected with the belt which provides
p the driving power. The pick-up motor also
drives the stopper.
stopper When it rotates forward,
forward the original is picked up
up. When it rotates in reverse
reverse, the
stopper operates.
The Gear-ADF 20 and pick-up motor are connected by y a clutch-spring. When picking up forward, the
clutch-spring is wound. When driving the DADF in rev verse, the clutch-spring loosens. When the lift sensor
detects a signal, the pick-up motor stops, the stopper operation
o finishes and the printer enters stand-by
status.
The DADF roller receives the driving power until the original reaches the Regi roller
roller. When the pick
pick-up
up
roller stops, the Regi motor rotates, and the DADF roller becomes idle.
1. When the original is setting up, the detect-sensor is activated and the pick-up motor rotates forward.
Then, the pick-up roller moves down and contacts an a original in the tray.
2. When receiving a “next job” command, the pick-up motor
m rotates forward and supplies an original until
th jjob
the b iis completed.
l t d
3.When all originals are fed and the tray is empty, the pick-up motor rotates in reverse and the stopper
moves down. The printer enters stand-by status.
Pick up motor
Pick up roller
ADF roller
2-6
64
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The registration (Regi) motor provides the driving pow wer by using a belt attached to the regi roller. It
transports the original by using the idle roller connectinng to the feed roller. The feed roller is fixed to a ball
bearing and oil-less bearing and rotates. The idle rolle er creates feeding force using spring pressure. The
registration motor that is interlocked with the registratio
on roller aligns the leading edge of the original.
original When
the leading edge of the original is placed in the Nip, thee motor rotates to align the original. The registration
motor repeats rotation and stopping to align each origiinal.
Regi motor
PULLEY-S2M Z26
PULLEY-S2M Z48/26
PULLEY-S2M Z26
ROLLER-REGI SIM
ROLLER-DU
UP REGI
2-6
65
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The feed motor provides the driving power by using a belt attached to the registration roller. It transports
eed roller. The feed roller is fixed by the ball bearing
the original by using the idle roller connecting to the fe
and rotates as fixed
fixed. The idle roller creates feeding force by spring pressure
pressure. The feed motor that is
interlocked with the roller-feed transports the original. The feed motor rotates continually during scan
operation. As a result, optimum scan quality is achiev ved.
Feed motor
PULLEY-S2M Z26
ROLLER-FEED IN
ROLLER-FEED IN
2-6
66
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Exit motor
PULLEY-S2M Z2
26
PULLEY-S2M Z26
ROLLER-EXIT
ROLLER EXIT
ROLLER EXIT TURN DUP
ROLLER-EXIT
T-TURN
2-6
67
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Solenoid-R
GUIDE-GATE-SIMPLEX
Solenoid-F
GUIDE-GATE-JUN
NCTION
2-6
68
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
• Vid C
Video Controller
t ll
• Engine Controller
• Scan Controller
• DADF Controller
• OPE Controller
• USB HUB Controller
• HVPS
• SMPS
Soft Power
DADF LPEC3 LPEC3 Drv
I/F
(Front-ssided)
Controller USB
HUB
2514
er Switch
LPEC1
C
DADF USB 1Gbps
HUB ICON FC
CON
2514 PHY. Mot Mot
DDR2 FLASH D
DDR2 FLASH Drv Drv
256MB 4MB 25
56MB 4MB
S3F443FX
Developer
The Engine Controller controls all modules required to o print, that is, LSU, HVPS, FAN, Fuser, etc.
The Engine Controller communicates with the Video Controller
C through the USB bus to communicate the
printing
i ti status,
t t and
d iinterfaces
t f allll video
id synchronization
h i ti n signals
i l tto print
i t th
the video
id d data
t ffrom th
the Video
Vid
Controller. The Video Controller receives print data froom the host through the network or USB port, and it
receives copy data from the Scan Controller. It takes this information and generates printable video bitmap
data, and then transfers the data to the Engine Contro oller.
2-6
69
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Image Controller (ICON) is used to compress and d decompress images for enhancing performance of
images processing and transceiving relevant data to and
a from the Video Controller through the PCIe. The
Video Controller uses the PowerPC 1GHz, 1GB Memo ory, and a 250GB HDD to perform these jobs
successfully. The Video Controller also communicates with the OPE Controller through the USB HUB
Controller to display some of the system information.
The USB HUB Controller interfaces with the Video Controller, the OPE Controller, and some USB Devices
such as USB memory sticks and Authentication devicees such as Common Access Card readers.
The Scan Controller scans images using the Platen orr the DADF.
The DADF Controller controls some mechanisms requ uired to scan by feeder continuously and
communicates with the Scan Controller to synchronize e the scanning timing. The Scan Controller transfers
the scanning data to the Video Controller through the PCIe
P high speed bus.
A MICOM at the Engine Controller activates each conttroller’s power and turns off power according to an
optimized energy-saving algorithm for optimal efficienc
cy. The soft Power Switch in the OPE Controller left-
side is used to safely shut down the system power. It is controlled by the MICOM.
2-7
70
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The following diagrams show the locations of the printer circuit boards:
Engine
Controller
Video Controller
DC Power
SMPS
Toner Connector
Deve joint
HVPS2
HVPS1
Paperr tray
Joint
2-7
71
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Video Controller, which is used to generate the prrintable video data, is comprised of a Main
Processor (MPC8533E) and a Video Processor (SPGP Pv4). The Video Controller has adopted the DDR2
SO-DIMM
SO DIMM as the system memory, a SATA Bridge to a access the hard drive (HDD), and a PCIe bus to
interface between the Main Processor and the other co ontroller chips (SPGPv4, Scan Controller and the
FAX Controller), and a USB Controller to interface with
h the Engine Controller and the OPE Controller
through the HUB Controller PBA.
PCIex SATA
A Bridge SATA II HDD
JM
MB362 3 5”
3.5
PCIex Ext.RI
P
DDR2
SO-DIMM 1GB
Video 128MB
SO-DIMM 1GB
x (FCON) Modem
CIP6
400MHz Secondary
FLASH DDR2 Modem
4MB 256MB
PCIex
x Switch
PEX
X8608
Local Bus IMAGE
Controller
(ICON)
35 ppm only
CIP6
BOOT USB USB 400MHz
FLASH MSOK Device Host FLASH DDR2
4MB 256MB
32MB ISP1582 OXU210
Engine I/F
2-7
72
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4 Connection
1 USB DEVICE PORT
12 11 POWER CONNECTOR
7
10 12 FDI CONNECTOR
Information
3
• SEC-CODE
11 CLX 9350ND : JC92
CLX-9350ND JC92-02150A
02150A
CLX-9250ND : JC92-02235A
2-7
73
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Only this memory module is available on this video controller. The general-purpose memory can’t be used.
Information
SEC-CODE : JC92-02193A
PBA Name : PBA-RAM DIMM
2.11.1.2 MSOK
The MSOK PBA is used to store all system information. It is composed of a Non-Volatile Flash Memory,
two EEPROMs, and a secured EEPROM. The Flash Memory (8 MB size) and two EEPROMs (256K-bit
ystem parameter, device status, tech information,
each) are used for all system operation information (sy
and service information). The secured EEPROM is fo or the system security information and is 2K-bit.
When a Video Controller PBA needs to be exchanged d, the MSOK PBA should be re-installed to the new
Video Controller PBA to retain the system information.
Information
SEC-CODE : JC92-02267A
PBA Name : PBA-MSOK
2-7
74
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 3
2 5 4
Information
SEC-CODE : JC92-02268A
PBA Name : PBA-FAX JOINT
Connection
2-7
75
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
I f ti
FAX-Kit model name : CLX-FAX150
SEC-CODE : JC92-02148A
PBA Name : PBA-DUAL FAX CONTROL
2-7
76
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
There are two types of modem cards in the CLX-9350ND. The Primary Modem Card is used to transfer
and receive FAX data through a telephone line. This PBA
P is controlled by the FCON PBA and has two
connectors one for the telephone line connection and the other for an external phone connection
connectors, connection.
Information
Connection
2-7
77
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Secondary Modem card is used for FAX processing with FCON as the second FAX number. When
this card is installed,, a customer can use another fax line. If the p
primary
y modem card is busy,
y, then fax
data is processed using this card. The secondary mod dem card has only a Tel line connector, no external
phone connector.
Information
Connection
2-7
78
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Image Controller (ICON) PBA is used to control and manipulate some scanned and stored image.
The ICON PBA is comprised of a CPU (CIP6,400MHz z,PCI interface), a PCIe express Bridge chip, 256MB
DDR2 Memory and 4MB Flash Memory .
Information
SEC-CODE : JC92-02149A
PBA Name : PBA-IMAGE
PBA IMAGE COPROCESSOR
2-7
79
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The FDI Module as a Option is used to track machine usage such as the number of print or copy pages for
eo Controller.
some special users. The Module interfaces to the Vide
Information
SEC-CODE : JC92-01616A
PBA Name : PBA SUB-FDI
Connection
2-8
80
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Main OPE Controller is composed of an SOC (R RMI Alchemy Au1250-700MHz navigation processor),
128 MB DDR2 memory, 32 MB Flash Memory, and an a 8.9 inch touchscreen LCD (1024 x 600).
The Au1250 is used to interface with users through
g thhe LCD display,
p y, which can support
pp the touch screen,,
some Keys, and some LEDs. A received command is i delivered to the Video Main Controller through the
USB interface of the HUB Controller PBA.
USB Host
SUB KEY PBA
for a key b’d
BUZZER
USB HUB
Video Controller
Controller
Engine Controller
2-8
81
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
SEC-CODE : JC92-02140A
PBA Name : OPE MAIN
Connection
1 KEY PBA I/F CONNECTOR
2 HUB PBA I/F CONNECTOR
3 LCD I/F CONNECTOR
2-8
82
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
SEC-CODE : JC92-02266A
PBA Name : SUB KEY
Connection
1 INTERFACE CONNECTOR TO OPE MAIN
M
2-8
83
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5
1
3
2
Information
SEC-CODE : JC92-02265A
PBA Name : SUB_HUB
Connection
2-8
84
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Engine Controller is composed of an ARM-based CPU (J5E), engine control SoCs (LPEC3) DDR2
SDRAM, Serial Flash memories, and other drivers for mechanical elements. The Engine Controller
manages an Electro-photography
Electro photography system,
system controls the
e Video Data of printing images from Main Board to
LSU, provides high-voltages and PWMs, adjusts temp perature in the fusing system, and reads sensor
signals. The Engine Controller also includes commun nication control units for optional DCF, HCF, and
Finishers.
Engine SPI
Fla
ash
Controller SMPS
2MMB
BUS
Local
DDR2 SDRAM
S
HVPS
32M
MB
Engine
e Con.
LSU
LPEEC3
ATMEGA 88 Deve/ITB
DCC
Fans PWMs
Moto
ors
Clutc
ch & BLDC/Step
Sensors
Solen
noid Motors
DCF/HCF/Finisher
2-8
85
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 2 3 4 5 6 7
25
26 8
24
23 9
22 28
10
21
20 27
11
19
18 17 16 15 14 13 12
Information
- SEC-CODE : JC92-02129A(35PPM)
JC92-02129A(35PPM), JC9
92-02239A(25PPM)
- PBA Name : PBA-ENGINE
Connection
1 BOTTLE JOINT 15 HVPS I/F ( 1 / 2 )
4 ID SENSOR 18 LSU CK
2-8
86
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Engine MSOK PBA is used to store CRUM inform mation. It is comprised of one EEPROM. When an
Engine Controller PBA is exchanged, the Engine MSO
OK PBA should be re-installed to the new PBA to
retain the system
y information.
Information
SEC-CODE
SEC CODE : JC92
JC92-02263A
02263A
PBA Name : PBA-MSOK
Connection
1 CONNECTOR TO ENGINE CONTROLLER
2-8
87
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Scan PBA includes an ARM-based SOC (CIP6),, DDR2 and Flash memories, and other drivers for
electro mechanical elements.
electro-mechanical elements The Scan PBA manag ges the Electro-photography
Electro photography system,
system controls the
Image Data of scanned images between CCD PBA to o Scan PBA, provides PWMs and control signals for
motor CTL & FAN CTL, and reads sensor signals. The
T Scan PBA also includes control units for DADF
with UART. It also includes a communication channe
el with the Main PBA, and PCI to PCIe bridge.
DDR2
4 3 2
1
CIP6
PCIe-
Brridge
Information
SEC-CODE : JC92-02170A
PBA Name : PBA-SCAN
Connection
2-8
88
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The DADF PBA controls the 4 stepping motors, 2 sollenoids, and 19 sensors, by using an ARM926 32-bit
RISC (360MHz core frequency). The DADF PBA supports a maximum of 100 sheets of documents
automatically.
t ti ll DADF supportst up tto 60% D
Duplex
l spe eed.
d
1 2 3 4 5 6
7
Motor DRV IC
DDR2
Jupiter5
11 10 9
Information
SEC-CODE : JC92-02165A
PBA Name : PBA-ADF
Connection
1 REGI/FEED/DETECT SENSOR
2 SCAN READ SENSOR
6 REAR SOLENOID
7 PICKUP/REGI MOTOR
8 SCAN JOINT PBA
9 PICKUP CHECK/ COVER OPEN
SENSOR
10 LED PANEL PBA/ FRONT SOLENOID
11 EXIT/ EXIT TURN SENSOR
2-8
89
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Controllers require connections to all of the system units such as the BLDC motor, Stepping Motor, Clutch,
Solenoid, Sensor, and other PBAs. The Engine Contrroller contains various types of connectors, to deliver
electronic signals through signal wires. The signal wirres provide electronic control signals that are used for
starting and stopping the motors, operating clutches, activating
a solenoids, sensing the unit state, etc.
2-9
90
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The SMPS (Switching Mode Power Supply) Board sup pplies electric power to the Main Board and other
boards through a Main Controller. The voltage provide ed includes +5V, and +24V from a 110V/220V power
input. It has safety protection modes for over current and
a overload.
3
1 5
2
Specification Inforrmation
General Input/Output Voltage 110V 220V
1) AC 110V (90V ~ 135V)
2) AC 220V (180V ~ 270V) SEC CODE JC44-00175A JC44-00176A
3) Input Current: 13.7A (110V) PBA NAM
ME SMPS V1 SMPS V2
6.8A (220V)
4)) O
Output Power: 1500W
DC 5V : 55W Conn
nection
DC 5VS : 30W
1 INP
PUT_AC
DC 24V : 432W
2 SM
MPS FAN OUT
3 SM
MPS Control Signal1 (from Engine PBA)
4 Fusser_AC
ser AC Output
5 OU
UTPUT_24V1/2/3/4/5/6 (to DC POWER PBA)
6 SM
MPS Control Signal2 (from Engine PBA)
7 SM
MPS FAN IN
8 OU
UTPUT_5V1/2/3/4/S1/S2 (to DC POWER PBA)
2-9
91
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Ground gnd 2
DC Output Connector( CN251 )
Fuser Control on_fuser_relay 3
D
Description
i i PIN NAME PIN ASSIGN
FAN Control pwm_fan2 4
Power +5V2 1
FAN Control nDetect_fan2 5
5V Ground GND 2
Fuser Control fuser_24v 6
Power +5V3 3
Fuser Control lamp2 7
5V Ground GND 4
Fuser Control lamp1 8
Power +5V4 5
Temperature smps_temp 9
5V Ground GND 6
Ground gnd 10
Power +5V5 7
5V Ground GND 8 Signal Connector1(CN6)
Ground gnd 7
2-9
92
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The CLX-9x50 series contains two High Voltage Powe er Supply (HVPS) boards. These two PBAs generate
24 high-voltage channels, which include: T1(4), T2+/-((2), CORONA(4), GRID(4), DEVE AC(4), DEVE
DC(4) FB
DC(4), FB, and SAW
SAW.
HVPS1 supplies High Voltage power for Charging (corona/grid), second transfer (t2 roller), fuser bias, and
saw plate.
7
3
4 5 6
Connection Information
1 GRID Y/M/C/K
SEC-CODE : JC44-00173A
2 CORONA Y/M/C/K PBA Name : HVPS1
3 HVPS 1 I/F
4 Fuser Bias
5 SAW Plate
6 T2+ and T2- (duplicated in 1output channe
el)
7 Ozone FAN
2-9
93
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Measuring Point
4 3 2 1
5 6 7
2-9
94
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Connection Information
1 Deve AC Y/M/C/K
SEC-CODE : JC44-00174A
2 Deve DC Y/M/C/K PBA Name : HVPS2
3 HVPS 2 I/F
4 T1 Y/M/C/K
2-9
95
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Measuring Point
4 3 2 1
5
6 7 8
DEVE AC M 2 -1000KV
Vpp(@ADC 128 & 100pF load, Frequency 4Khz) *AC
DEVE AC C 3 -1000KV
Vpp(@ADC 128 & 100pF load, Frequency 4Khz) *AC
DEVE AC K 4 -1000KV
Vpp(@ADC 128 & 100pF load, Frequency 4Khz) *AC
T1 Y 5 15
5uA(@ADC 59 & 41Mohm load) *static current
T1 M 6 15
5uA(@ADC 59 & 41Mohm load) *static current
T1 C 7 15
5uA(@ADC 59 & 41Mohm load) *static current
T1 K 8 15
5uA(@ADC 59 & 41Mohm load) *static current
2-9
96
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
2.11.10 LSU2/LSU3
The LSU2 PBA includes five Step Motor Drive ICs (forr the LSU Skew motor Y/M/C, LSU shutter motor, and
waste toner motor), and it is the interface connector fo
or the LSU Unit and the fan control TR for LSU fan1/2.
1 2 3 12
4 5 6 7 8 9 10 11
Connection
1 LSU YM – INPUT
2 LSU CK – INPUT
3 LSU JOINT I/F
4 LSU YM – OUTPUT(35ppm – 32pin , 25ppin – 24pin)
5 LSU CK – OUTPUT(35ppm – 34pin , 25ppin – 28pin)
6 LSU Motor
7 LSU
SU TEMP
8 LSU SHUTTER SENSOR
9 LSU FAN
10 LSU SHUTTER MOTOR
11 LSU SKEW MOTOR Y,M,C
12 WASTE
Information
< CLX-9350ND >
SEC-CODE : JC92-02153A
PBA Name : LSU2
2-9
97
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 2 3 4 5 6
8 7
9 10 11
Connection
Information
SEC-CODE : JC92-02151A
PBA Name : Toner Connector
2-9
98
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Deve Joint PBA includes Step Motor Drive ICs forr the ITB Engine Step motor, and it is the interface
connector for the deve, crum, clutch, sensor, and BLD
DC motor.
2 3 4 5 6 7 8
1
9 10 11 12 13 14 15 16 17 18 19
Connection
Information
SEC-CODE : JC92-02152A
PBA Name : DEVE JOINT
2-9
99
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1- BLACK : GNDD
2- GRAY : 24VV
Information
SEC-CODE : JC92-02244A
PBA Name : Eraser
2 11 14 DC P
2.11.14 Power PBA
The DC Power PBA distributes DC power to the Engine Controller and Video Controller. It also provides
he unit power when the driving unit is exposed) when
24V of power interlock function for safety (cuts off th
using the power control relay.
1 2 Information
SEC-CODE : JC92-02261A
PBA Name : DC POWER
3 4
Connection
1 24V to Engine 5 Relay Control
5 2 5V to Engine 6 24V INPUT
3 Micro Switch 7 5V INPUT
4 5V/24V to Video - -
6 7
2-100
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This is the interface PBA between the Paper tray unit and
a the Engine Controller. The Paper tray Joint PBA
provides a connection interface for the clutches, senso
ors, and Paper tray lift DC motors.
2 3
1
7
4 5 6
Connection Information
1 2 3
4 5 6 7
Connection
C ti Information
I f ti
1 SIDE JOINT I/F 5 MP MEDIA
A SIZE SEC-CODE : JC92-02233A
PBA Name : SIDE JOINT
2 DUPLEX 2, ID SENSOR 6 MP SENSO
OR, CLUTCH
3 DUPLEX, FUSER OUT 7 PAPER CU
URL SENSOR
SENSOR
4 DUPLX CLUTCH - -
2-101
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 2 Connection
1 Fuser EEPROM, Pressure Sensor I/F
2 Pressure Sensor
Information
SEC-CODE : JC92-02155A
S
P
PBA Name : FUSER
The Waste
W Sensor PBA detects the waste toner level inside
the wa
aste toner container.
Information
SEC-CODE : JC92-02232A
S
P
PBA Name : WASTE SENSOR RX
Information
SEC-CODE : JC92-02158A
PBA Name : LED PANEL
2-102
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Th
he Crum PBA includes CRU memory for Deve and
Bo
ottle Unit Life Cycle counting.
Information
SEC-CODE : JC92-02127A
PBA Name : TONER CRUM
4 5 In
nformation
SEC-CODE : JC92-02172A
S
P
PBA Name : DEVE CRUM I/F
Connection
1 TC SENSOR 4 ERASER
2 OPC CLEAN SENSOR 5 DEVE CRUM I/F
3 DEVE CRUM I/F - -
2-103
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
SEC-CODE : JC92-02
2163A
PBA Name : DEVE CRUM
C JOINT
The Deve Crum Joint PBA is the interface PBA between the Developer Unit and the system.
Information
SEC-CODE : JC92-0
02164A
PBA Name : TONERR CRUM I/F
Information
SEC-CODE
SEC CODE : JC92
JC92-0
0
02162A
PBA Name : ITB JO
OINT 1
2-104
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
In
nformation
SEC-CODE : JC92-02160A
PBA Name : ITB ENCODER
1
Connection
C
1 ITB ENCODER I/F
2 ITB EEPROM
Information
SEC-CODE : JC92-02173A
PBA Name : ITB JOINT 2
Information
SEC-CODE : JC92-02174A
PBA Name : ITB JOINT 3
2-105
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Scan Joint PBA includes 1 Step Motor Drive IC (for the scan motor) and is an interface connector for
the Scan PBA and the fan control TR for the CCD fan n, DADF I/F Port , Xe-Lamp Power, and CTL
connector. It also provides a connector connecting the HP/Cover open1,2 sensor and the 24V, 5V power
connectors from the Engine Control board.
MOTOR
R DRIVER IC
1
7
2 3 4 5 6
Information
SEC-CODE : JC92-02144A
PBA Name : PBA-SCAN JOINT
Connection
1 SCAN PBA
2 ENGINE PBA
3 SCAN MOTOR
4 ADF PBA
5 FAN
6 INVERTER
7 COVER OPEN SENSOR PBA, HOME
E POSITION SENSOR
2-106
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This is the CCD board used in the Scanner unit. The fu unction of this board is to convert the reflected light
from an original document to electrical signals. It includ
des the CCD, ADC, Logic IC, etc. The CCD converts
the reflected light from an original document to three-c
three color
c analog signals; red, green, blue. ADC converts
each analog signal to digital. And for high speed data transmission,
t the digital data signal is converted to
LVDS format with serialization.
CCD SENSOR
1 2
Information
SEC-CODE : JC92-02271A
PBA Name : PBA-CCDM
Connection
1 SCAN PBA
2 SCAN PBA
2-107
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Cover ope
en1 detects “cover open.”
Cover ope
en2 detects “cover closed.”
Inform
mation
SEC-C
CODE : JC92-02143A
1 PBA Name
N : PBA-COVER OPEN SENSOR
Conne
ection
The DADF L
Th Length
th S
Sensor PBA includes
i l d 3 connector t rs. These
Th connectors
t are for
f the
th DADF page llength
th
sensor, DADF page width sensor, and the interface with
w the DADF.
Information
SEC-CODE : JC92-02168A
1 PBA Name : PBA-LENGTH SENSOR
Connection
2 3 1 ADF PBA
2 WIDTH SENSOR PBA
3 LENGTH SENSOR 1,2,3
2-108
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
SEC-CODE : JC92-02167A
PBA Name : PBA-WIDTH SENSOR
1
Connection
The DADF Mixed PBA includes 3 photo interrupt sensors. It uses these sensors to detect the document
width
Information
1 SEC-CODE : JC92-02166A
PBA Name : PBA-MIXED SENSOR
2 Connection
2-109
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Information
SEC-CODE : JC92-02169A
1 PBA Name : PBA-LED PANEL
Connection
1 ADF PBA
Information
SEC-CODE : JC92-02185A
1 PBA Name : PBA-LED PANEL
Connection
1 SCAN PBA
2-110
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The Cassette Heating cable is located at the bottom of the cassette where it improves paper handling
ette temperature in very humid environments.
quality and print quality by heightening internal casse
Scanner Heating cables are placed under the scanne er and align cover, and are used to prevent dew from
forming on the glass and the mirrors by heightening internal scanner temperature in very cold
environments
environments.
2-111
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. Replacement proce
edures
This chapter includes procedures for replacing service
eable parts on the printer.
When you disassemble and reassemble components in the printer, you must use extreme caution.
The close proximity of cables to moving parts makes proper
p routing very important. When you remove
components make sure that any cables disturbed by tthe procedure are restored as close as possible to
components,
their original positions. Before removing any compone
ent from the machine, note the cable routing and
surrounding part configurations.
3-1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.2 Cover
This section describes the procedures for removing an
nd replacing the printer covers.
321F
3.2.1 Frontt cover
Perform the following procedure to remove the front co
over:
[A]
[C]
[B]
3-2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Tie Tie
3-3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[B]
2. Remove the USB cover [A] after removing 1 screw. 4. Remove the front cover [C]. (refer to 3.2.1).
[A]
[C]
3-4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Remove the toner cartridges. Open the Frame 7. Remove the ITB.
cover.
Toners
Frame
Cover
Left Cover
3-5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1 3
3-6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
e damaged! Please pay attention.
When assembling the Inner Cover the harness can be
1. Remove Plate-Shield [A] after removing 1 screw. 4. Remove the left upper cover [D] after removing
2. Remove the ozone filter [B]. 6 screws.
3. Remove the dust filter cover [C]. 5. Remove the left lower cover [E] after removing
4 screws.
[A]
[C] [D]
[B]
[E]
3-7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the rear upper cover [A] after removing 2. Remove the rear lower cover [B] after
7 screws. removing 5 screws
[B]
[A]
[A]
[B]
3-8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3 3 1 OPE assembly
3.3.1 bl
2. To remove the USB cover, remove 1 screw. 4. Remove 3 rubbers screw covers.
[A]
3-9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Remove 3 screws. 7. Pull out the connector from the holder hole.
8. Take off the OPE assembly.
3-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the Rail cover after removing 1 screw. 3. Remove 2 screws, and shift the cover-rail [B] in
th direction
the di ti off th
the arrow.
[B]
[A]
2. Remove 4 screws, and then shift the cover-rail [B] 4. Remove 2 screws.
in the direction of the arrow.
[B]
3-1
11
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Take off the cover-rail [B]. 7. Remove the OPE main PBA after removing 6
screws and 3 cables.
[B]
CAUTION
B careful
Be f l nott d
damage iin FFC cable.
bl
6. Remove the bracket-rear [C] after removing 8. Remove the bracket-LCD [D] after removing 3
5 screws. screws.
[D]
[C]
3-1
12
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9. Take off the LCD panel assembly [E]. 10. Remove the Key-PBA [F] after removing 2 screws.
[E]
[F]
[A]
3-1
13
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This section contains the procedures for disassembling the components of the printer Scan Unit.
NOTE
Perform the followings after replacing specified scannerr part.
S
Scanner Geometry
G Compensation
C i
Refer to Scan Area Adjustment in chapter 4. Service Mode.
NOTE
s
Specified Scanner Part : Scan Main PBA , Scan Glass
P
Pass Criteria
1) 4mm Line should be printed at least in (, , )
3-1
14
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the front cover [A] after removing 2 3. Remove the Cover scan glass [C] after removing
screws. 2 screws.
[A] [C]
2. Remove the glass scan ADF [B] after removing 2 4. Remove the glass scan [D] after removing 2
screws. screws.
[B]
[D]
3-1
15
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3-1
16
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.4.3 Lamp
Perform the following procedure to remove the Lamp from the Scan Unit.
To replace the lamp, you must first remove the scan glass
g (3.4.1).
[A]
[B]
[B]
3-1
17
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Shift the lamp unit to the center. Remove 2 screws. 7. Take off the lamp.
And take off the lamp.
6. Unplug
p g the connector. Release it from harness 8. Check the Wire p
position in assembled status.
holder.
3-1
18
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
P f
Perform th
the ffollowing
ll i procedure
d tto remove th
the JJoint
i tPPBA ffrom th
the S
Scan U
Unit.
it
3-1
19
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.4.7 FAN
P f
Perform th
the ffollowing
ll i procedure
d tto remove th
the F
Fan ffrom
m the
th Scan
S Unit.
U it
[A]
“OUT” label
CAUTION
Please attach “OUT” label on the replacement FAN to match the direction and location on the original fan.
3-2
20
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.4.8 Pulley-belt
Perform the following procedure to remove the Pulley--Belt from the Scan Unit.
[B]
[A]
NOTE
y remove the scan gear and gear belt.
Remove cover [A] (see below), this allows you to easily
[A]
3-2
21
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[B]
[C] [A]
[A]
3-2
22
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the Scanner Heating cable from the Scan Unit.
[A]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
[F]
Heater-a
<Scan h
<Scan_h
heater2 harness> [G]
[E]
[C]
[D]
Connect [[C],
], [D]
[ ] as shown Fix the black wire witth the Connect [[E]] as shown
above. clamp. above.
3-2
23
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Insert 2 bars of the heater-a [B] to the align cover [A]’s slits and screw up 2 points.
[B]
[A]
CAUTION
Please be careful of the harness is not caught between Align cover[A] and heater-a[B].
[F]
[D] [E]
[C]
[B]
[F]
[A]
[C]
[G]
3-2
24
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[H]
CAUTION
n heater and frame base.
Please be careful of the harness is not caught between
[I]
[H]
3-2
25
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
10. Connect the connector [K] with the connector [G] of Scan_heater2 harness.
[ ]
[K] [ ]
[K]
[G]
11. Put the align cover on the scanner and connect the connector [J] of heater-f.
12. Put the connector [J], [F] in the align cover .
[F]
[J]
3-2
26
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A
A]
CAUTION
Connectors for FFC cables of CCD are very fragile.
3-2
27
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before
replacing it, make sure that fuser unit has cooled.
CAUTION
1. Before this disassembling the fuser unit,
remove the Bracket inlet guide [B]. If it is
damaged or bent, it may make a paper jam.
[B] NOTE
The shape or color of some parts can be
changed without notice.
3-2
28
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A] [C]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
2. Take off the NC thermistor holder [B] after removing 4. Unplug the harness from both sides of the
5 screws and d 2 connectors. thermostat
h .
5. Remove 3 screws.
[B]
3-2
29
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.5.2 Thermistor
Perform the following procedure to remove the Thermistor from the Fuser Unit.
1. Take off the Bracket fuser top [A] after removing 4 screws.
s
[A]
CAUTION
When removing 2 screws pointed by the arrow,
a be careful not to damage in harness
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
CAUTION
Be careful not to bend the thermistor.
NOTE
NTACT conditions. They must not touch
Contact type NTC thermistors work in NON-CON
f
fuser belt
b lt surface.
f
3-3
30
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
CAUTION
When reassembling this, be careful not to
damage in harness.
Red
/Blue
CAUTION
When reassembling the pin connector, make
sure the colors are positioned as shown above.
3-3
31
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. Remove 2 screws.
[ ]
[B]
5 Remove
5. e o e tthe
e suppo
supportt co
connector
ecto [C] a
after
te removing
e o g
2 screws.
[C]
3-3
32
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[D]
CAUTION
Be careful not to hurt yourself.
3-3
33
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[E]
[F]
CAUTION
Be careful not to damage in harness.
The damage of the harness can make a fire
caused by a short circuit.
3-3
34
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Be careful not to damage in harness.
The damage of the harness can make a fire
caused by a short circuit.
CAUTION
When replacing the lamp, please be careful of
the lamp connector direction.
3-3
35
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the Fuser Bias / Fuser Bias Terminal from the Fuser Unit.
1. Remove the g
guide duplex
p after removing
g 6 screws.
2. Remove the Fuser bias [A] and the Fuser bias terminal [B] after removing 3 screws.
When removing [B], slide it to the direction of arrow.
[B]
[A]
NOTE
When you are only replacing the Fuser Bias Terminal [B], you do not need to remove the Duplex guide.
3-3
36
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the EEPROM and Photo Sensor from the Fuser Unit.
[A]
CAUTION
Be careful not to damage in harness.
[B] The damage of the harness can make a fire
caused by a short circuit.
4 R
4. Remove th
the photo
h t sensor [C] ffrom th
the shield
hi ld [B]
[B].
[C]
3-3
37
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.5.7 Gear
Perform the following procedure to remove the Gear frrom the Fuser Unit.
[B]
1. Remove the motor (Refer to 3.5.3)
2. Remove the shaft PR screw [A].
3. Push and release the DC Harness holder [B] in
the direction of arrow after removing 1 screw.
[A] 4. Remove the bracket [C] after removing 3 screws.
[C]
[D]
3-3
38
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. R
1 Remove th
the H
Halogen
l llamp (R
(Refer
f tto 3
3.5.4)
5 4) 6 R
6. Remove th
the Holder
H ld lamp
l [C] after
ft removing
i 3
2. Remove the shaft PR screw [A], 4 screws, and screws.
connector on EEPROM.
3. Release the Holder EEPROM[E] after removing 1
screw.
4. Remove the Bracket [B]. [C]
[B]
[A]
[E]
5. Remove the bracket [F] after removing 1 screw. 7. Remove 2 screws and 2 springs.
p g
8. Remove the bracket [D].
[D]
[F]
CAUTION
The ends of springs is sharp. Be careful not hurt
yourself.
3-3
39
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[E]
10. Remove 2 screws, and remove the bracket bearing HR[F] from both sides.
[F] [F]
11. Remove the BUSH-HR [G]. Remove the Heat rollerr [H] from the opposite side.
[G]
[H]
3-4
40
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Be careful not to lose the springs. They are easily
released.
[B]
[B]
3-4
41
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Be careful not to bend the Bracket HR.
If it is bent, the bearing can be released easily.
It can damage the belt, overheat and make a fire.
[C]
[D]
[D]
3-4
42
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
3-4
43
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
When removing screws, remove it while the
assembly is fixed. The assembly can rotate
instead of screws.
3-4
44
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
afety. Basically, reassembly is in reverse order of the
The fuser unit is sensitive unit related to the customer sa
disassembly But for some items
disassembly. items, please check out the ffollowings
followings.
Ch
heck the Spring hook direction.
Ch k th
Check the Bearing
B i
assembly status.
3-4
45
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Bad Good
3-4
46
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-4
47
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-4
48
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
If Thermostat or harness connection is not stable,
overheating/fire can occur because the overheat-
protective function can not be performed properly.
Ch k th
Check the NC th
thermistor
i t assembly
bl status.
t t
CAUTION
If the NC thermistor connector is not connected
properly, overheating/fire can occur.
CAUTION
g/fire can occur.
If the connector is not connected properly, overheating
Check the assembly position, connection status.
3-4
49
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE – Refer
R f tot maintenance
i t chapter
h t ffor di
disassemb
b
bli the
bling th whole
h l Cartridge
C t id T Transfer
f Unit.
U it
Perform the following procedure to remove the Cartridge Transfer Belt from the Cartridge Transfer Unit.
2 Remove 10 screws.
2. screws
(Cover Left x 4 , Cover Right x 4, Cover Top x 2)
CAUTION
When removing screws, be careful not to drop
something into the inside.
3-5
50
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
When you remove the cover top, make sure you
remove the harness wires from the wire guides.
CAUTION
When removing the harness wires, be careful not to
be broken.
[A]
3-5
51
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[E]
[B]
[D]
[D]
[F]
E-ring
NOTE
NOTE
3-5
52
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
ension roller will drop down and the belt surface will
If you remove the guide tension F/R completely, the te
be damaged.
[G]
[H]
CAUTION
[I] When removing the tension roller from the ITB unit,
be careful not to drop both bush-bearings in the
belt.
NOTE
In case of using the ITB Frame Install JIG, install
the frame on the JIG and remove the belt to the
direction of arrow.
[J]
3-5
53
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
Drv, Tension,Guide A,Guide B,Bk Nip) by using the air
1. Before assembling the belt, clean the frame roller (D
spray and alcohol.
2. When reassembling the belt, be careful not to be staabbed or contaminated.
Note
After assembling the belt, check the inside Rib position of the belt.
Both Ribs must be located below of the Drive roller, Tension roller.
OK Example
NG Example
3-5
54
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-5
55
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A] CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
2. Slightly release 6 screws. It is not necessary to rem move the screw completely.
M
Move the
th rear shield
hi ld [B] iin th
the di
direction
ti off th
the yellow
ll a
arrow and
d remove itit.
[ ]
[B]
3-5
56
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Observe precautions
For handling
Electrostatic
S
Sensitive
iti
Devices
CAUTION
MSOK When replacing the engine board,
you must insert the MSOK and
Memoryy on new engine
g board.
To remove the HDD from the printer, remove 4 screws and the cable.
3-5
57
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the Rear cover and Rear shield. 4. Take off the video controller after removing 8
2. Take off the Top Slot [A] after removing 5 screws. scre s and all connectors
screws connectors.
[A]
MSOK
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
CAUTION
3. Take off the Bottom Slot [B] after removing 2 When replacing the Video board, you must
screws. insert the MSOK and Memory on the new video
PBA.
[B]
3-5
58
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
To remove the Joint PBA from the printer, remove 4 scrrews and all of the connectors.
CAUTION
Observe precautions
For handlingg
Electrostatic
Sensitive
Devices
1 U
1. Unplug
l ththe connector
t ffrom the
th engine
i controller.
t ll
ng 2 screws.
2. Open the shield door. Remove the FAN after removin
CAUTION
Please attach “OUT” label on the FAN after
assemble equally with existing fan's direction.
3-5
59
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
CAUTION
When replacing a toner PBA, it is easy to drop the
pp g the screw,
screw into the case. To avoid dropping
use a magnetic driver.
3-6
60
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-6
61
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
[B]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3-6
62
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. Unplug 2 connectors. 5. Put the SMPS box [A] down as shown below.
[ ]
[A]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
CAUTION
When unplugging this connector, be careful not to
get hurt
h yourself.
lf
3-6
63
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[B
B]
9. Remove the HVPS board (front) after removing 4 scrrews and all of the connectors.
CAUTION
ottom of the Front HVPS PBA, make sure that
When reassembling the connectors from top/bo
the wire colors match the photo above.
3-6
64
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
om of the Rear HVPS PBA, make sure that the
When reattaching the connectors to the top/botto
wire colors match the photo above.
3-6
65
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the rear cover. (refer to 3.2.4) 3. Take off the SMPS board after removing 7
2. Remove the 6 screws from the SMPS box. screws and all connectors.
3-6
66
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the SMPS Fan from the printer.
[B]
3-6
67
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
CAUTION
Please attach “OUT” label on the
replacement FAN to match the direction and
location on the original fan.
[B]
3-6
68
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the Ozone Filter Fan from the printer.
[A]
3-6
69
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
2. Release the side joint board cover after removing When you reassemble the side joint board to the
2 screws. side unit, make sure the harness arrangement is
correct.
Push !
3-7
70
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-7
71
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3-7
72
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-7
73
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the Main Drive PBA holder after removing 4 screws and all of the connectors.
Hook
Connector
3-7
74
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This section contains the procedures for disassembling the Pick-up Drive Unit components of the printer.
Perform the following procedure to remove the Pick-upp Drive Unit.
3. Remove Pickup
p Drive Unit after removing
g 4 screws and all connectors.
3-7
75
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-7
76
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This section contains the procedures for disassembling the MP/Regi Drive Unit components of the printer.
To remove the MP/Regi Drive Unit, perform the following procedure.
3-7
77
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-7
78
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This section contains the procedures for disassembling g the Exit Drive Unit components of the printer.
To remove the Exit Drive Unit, perform the following prrocedure.
3 11 1 F
3.11.1 Fuser/Exit
ser/E it drive
dri e motor
Perform the following procedure to remove the Fuser/E
Exit Drive Motor from the Exit Drive Unit.
To remove the motor, remove 4 screws and 1 connecto or.
3-7
79
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-8
80
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the Exit Drrive Clutch from the Exit Drive Unit.
3-8
81
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Hinge cover
2. Remove 1 screw.
3. Open the connector cover. Remove 1 screw. And
unplug the connector.
3-8
82
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Loosen 3 screws.
5. Pull down the stoppers and tighten 3 screws.
3-8
83
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
8. Remove 2 screws.
9. Lift up and release the DADF.
3-8
84
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-8
85
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. Fix the steel plate on the longest scale mark using the
t handle hinge. A scale mark is approximately 0.5 mm.
3-8
86
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-8
87
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7 M
7. Make
k sure th
the ttwo rubber
bb padsd (l
(left
ft side)
id ) and
d ttwo plastic
pl ti projections
j ti (right
( i ht side)
id ) on th
the b
bottom
tt off th
the
DADF on both sides touch the top of the machine as s shown below.
CAUTION - If the gap is more than 0.5 mm (0.02 inch)), adjust the screw on both sides as shown below until
the gap is smaller 0.5 mm (0.02 inch). You have to che
eck all rubber pads and plastic projections.
3-8
88
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-8
89
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
10. Put in the supporting rubber into the DADF cable cover.
c Assemble the DADF cable cover. And tighten
the screw.
11. Open the DADF and place the white sheet. White side s should be faced down on the scanner glass and
aligned it with the registration guide at the top left corner
c of the glass.
12. Carefully close the DADF. The white sheet will be attached
a to the DADF. If the white sheet is not
attached properly when the DADF is opened, stick the white sheet on the DADF properly using the
stickers.
ti k
3-9
90
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
[C]
3-9
91
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Hinge cover
2 Remove 3 screws.
2. screws
3. Push and release the hook from the bottom.
4. Take off the DADF right side cover [D].
[D]
Hooks
3-9
92
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3-9
93
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3-9
94
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[E] CAUTION
When reassembling the holder-harness, make sure
the harness wiring is routed correctly.
[G] NOTE
To remove the Top Left Motor [G], first remove the
Top Right Motor [F].
CAUTION
When reassembling the Motor [G], be careful not to
lose the washer.
Washer
3-9
95
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[H]
[I]
3-9
96
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Linker
3-9
97
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove 2 screws.
2 Push and release 4 hooks from the bottom
2. bottom.
3. Remove DADF Left Side Cover [J].
[J]
Hooks
3-9
98
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[K]
7. Unplug & remove the Pick-up Guide Sensor PBA[L]] or photo sensor.
[L]
3-9
99
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[M] 2. Take off the Exit Turn Gate solenoid [M] after
removing 1 screw.
3-100
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[C]
[A]
[B]
2. Remove 7 screws [D] and Harness Cover [E]. 4. Change Upper-limit Sensor [A], Empty Sensor [B]
and Take-away open sensor [C].
[C]
[D]
[E]
[A] [B]
3-101
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[D]
6. Remove 2 screws.
3-102
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[B]
3-103
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[C]
[D]
[E] [F]
3-104
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to remove the Cover--Side Unit from the printer.
3-105
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove 1 screw and the stopper [A]. 3. Remove 1 screw and unplug the connector.
[A]
3-106
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.13.3.2 MP tray
Perform the following procedure to remove the MP tray from the Cover-Side.
1. Remove the harness cover [A] after removing 3 3. Remove 2 screws and unplug the connector.
screws.
[A]
2. Remove the bracket [B] after removing 4 screws and 4. Remove 3 screws.
unplugging the connectors.
[B]
3-107
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[C]
3-108
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove the side joint PBA cover [A] after 3. Remove 1 screw and the stopper [B].
removing 3 screws.
[B]
[A]
2. Remove 2 screws and the stopper [B]. 4. Lift up the Face Up Exit Lower and unplug the
connector.
connector
[B]
3-109
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3.13.3.4 Solenoid
Perform the following procedure to remove the 2 Side Unit Solenoids from the printer.
[A]
[B]
[C]
[E]
3-110
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before
replacing it, make sure that fuser unit has cooled.
[B]
3-111
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Be careful not to drop the screw inside the
printer.
3-112
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-113
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
[B]
3-114
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[C]
5. Remove 2 screws.
[D]
3-115
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-116
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-117
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3-118
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Remove 2 cassettes.
2. Remove 1 screw.
NOTE
You will need a short screwdriver.
3-119
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[B] [A]
3-120
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
You will need a short screwdriver.
3-121
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Service Mode
4.1. Entering/Exiting Service
e Mode
To enter the service mode, press 1,2,3 number keys
s simultaneously. When the password dialog box
appears, enter “1934” and press the “OK” button.
To exit the service mode, press the “Exit Service” bu
utton at the right upper corner of the display.
Selecting “Yes” in “Reboot Copier “will reboot the se
et.
Selecting “Yes” in “Reset Counter “will clear the cou
unt of “Information > General > Printed Impressions
since Last Call”.
Picture
e 1-1
4--1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
M
Menu P
Page
Machine Serial Num mber
Network IP Address s
General P.4-6
Printed Impressions s since Last Call
Service Started Date
Customer Replacem ment Unit Toner
Imaging
g g Unit
Waste Toner Container
Finisher
ITB
Supply Status P. 4-6
Field Replacement Unit Fuser
Roller
Filter
DADF Roller
Scanner
System Firmware Version
V
Main Firmware Vers sion
Portability Version
XOA Framework Ve ersion
I f
Information
ti E i Fi
Engine Firmware V Veersion
i
Scan Firmware Vers sion
Image Converter Ve ersion
Fax Firmware Version
UI Firmware Version
VPU Firmware Vers sion
ADF/ DADF Version n
Software Version DCF Version P. 4-8
HCF Version
Finisher Version
Booklet Firmware Version
V
Hole Puncher Firmw ware Version
Print CMS Version
Copy CMS Version
Scan CMS Version
IEM Version
Power Firmware Ve ersion
PCL5C Version
PCLXL Version
4--2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Menu Page
PostScript / PD
DF / XPS Version
Scan Driver Veersion
Fax Driver Verrsion
VPU Driver Ve ersion
Software Version Boot Rom Vers sion P48
P.4-8
Boot Rom Boo otloader Version
Boot Rom OS Version
Boot Rom File System Version
File System Veersion
Information
Power On Hou urs
Service Hours P.4-8
Power Save Hours
Fault Log P.4-8
Supplies Inform
mation
Fax Protocol Dump
D List
Auto Color Reggistration Result
Print Reports P.4-8
TRC Control History
H
OPC ACR Rep port
Usage Counter Report
Table 2-1
2
4--3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Menu Page
Fault Counts P.4-10
Pick-up Jam
Feed Jam
Duplex Jam
Prin
nter
Exit Jam
Finisher Jam
Booklet Jam
Jam Count Feed Jam P.4-11
R i Jam
Regi J
Scan Jam
Sca
anner Exit Jam
Maintenance Counts
Duplex Regi Jam
Duplex Scan Jam
Duplex Exit Jam
Ton ner Cartridge
Ima aging Cartridge
ITB
B
Fus ser
Part Replacement Count P.4-13
Roller
Filtter
DAADF Roller
Sca anner
Table 2-2
4--4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Menu Page
Engine NVM Initialization
g
Engine Diagnostics
g g
Engine NVM Read/Write P. 4-14
Engine Test Routines P. 4-17
Fax NVM Read/Write P. 4-24
Fax Diagnostics
Fax Test Routines P. 4-25
Shading Test P. 4-27
Scanner Diagnostics Scanner/DADF NVM Read/Write P. 4-27
Scanner/DADF Test Routines P. 4-28
Print Adjustment P. 4-30
Diagnostics
Copy Adjustment P.4-32
Adjustment Scan Area Adjustment P. 4-33
DADF Adjustment P.4-35
Finisher Adjustment P.4-37
ACS P. 4-40
Auto Color Registration P 4-41
P. 4 41
Color Management Full Color Registration P. 4-42
Auto Color Tone Adjustment P. 4-43
Print Test Patterns Skew Pattern
Table 2-3
Menu Page
Main Memory Clear P. 4-46
Deviice Configuration Data Clear
T mporary & S
Tem Spooll D
Data
t Cl
Clear
Hard Disk Maintenance Userr Saved Data & Log Clear P. 4-46
All Saved
S Data Clear
Hard
d Disk Check
Service Functions
Debug Log P. 4-46
Port P. 4-47
Capture Log P. 4-47
Toner Save P.4-47
Count Setting of Large Count P.4-47
TR Control Mode P.4-48
Table 2-4
4--5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4.3 Information
4.3.1. General
• Information > General
This menu displays the machine’s serial number, ass
signed IP address, printed impressions since last
call, and the day of first service.
In the CRU and FRU list, there are four columns : items, status, current, max life.
• Item : Refer to the table below.
• Status : This shows the current status of the selectted item.
• OK : The current count is smaller than the default
d warning value
• Check : The current count is bigger than de
efault warning value
• Off : The current count exceeds the max life
e.
• Count : This shows the current count of the selected d item.
• Max. life : This shows the max capacity of the selec
cted item.
Users can edit the default warning value within the giiven threshold.
Selecting some items will enable the reset button to rreset the current count to 0 after replacing the unit
unit.
Default
Unit Item Max. Life Threshold
Warning Value
Yellow 5K
20K / 15 10% 5 ~ 30%
Magenta 20K / 15
5K 10% 5 ~ 30%
Toner
Cyan 20K / 15
5K 10% 5 ~ 30%
Black 25K 10% 5 ~ 30%
Yellow 75K 10% 5 ~ 30%
Magenta 75K 10% 5 ~ 30%
Imaging Unit
Cyan 75K 10% 5 ~ 30%
Black 75K 10% 5 ~ 30%
4--6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Default
Unit Item Max
x. Life Threshold
Warning Value
Waste Toner Waste Toner
75K Near Full NA
Container Container
Finisher Stapler
NA Near Empty NA
Cartridge
Booklet Stapler
Finisher NA Near Empty NA
Cartridge
Punch Waste
NA Full NA
Hopper
ITB 300K (PM Count) 5% 2% ~ 10%
ITB ITB Cleaner 150K (PM Count) 5% 3% ~ 10%
T2 Roller 150K (PM Count) 5% 3% ~ 10%
Fuser Fuser 150K (PM Count) 10% 5% ~ 20%
P/up Roller MP 150K (PM Count) 10% 5% ~ 20%
P/up Roller Kit-tray1
Kit tray1 225K (PM Count) 10% 5% ~ 20%
P/up Roller Kit-tray2 225K (PM Count) 10% 5% ~ 20%
Roller
P/up Roller Kit-tray3 225K (PM Count) 10% 5% ~ 20%
P/up Roller Kit-tray4 225K (PM Count) 10% 5% ~ 20%
P/up Roller HCF 225K (PM Count) 10% 5% ~ 20%
Ozone Filter 150K (PM Count) 10% 5% ~ 20%
Filter
Dust Filter 150K (PM Count) 10% 5% ~ 20%
Assembly ADF
DADF Roller 225K (PM Count) 10% 5% ~ 20%
Roller
Scanner Fan Filter 180 days 10% 5% ~ 10%
Table 3-1
4--7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
• Power
P on H
Hours : It iindicates
di t th the h
hours off system
t power on since
i th
the fifirstt b
booting
ti off th
the system.
t
• Power Save Hours : It indicates the hours of system m power save since the first booting of the system.
This menu displays faults occurred while the system was operating.
Pressing clear button will clear all the save fault log of
o the system.
• Supplies Information
• Fax Protocol Dump List
• Auto Color Registration Result
• TRC Control History
• OPC ACR Reportp
• Usage Counter Report
4--8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Result Meaning
0 Success
100 Sensor LED calibration failure
f
200 Pattern storage failure in
n register
301 Out of normal range in re
ear pattern width
302 Out of normal range in frront pattern width
304 Out of normal range in center
c pattern width
Number of sensed patte
ern is lager than normal number (check ITB scrat
308
ch)
316 ern is smaller than normal number
Number of sensed patte
Multiple errors. For exam
mple 301, 302, 304, 316 error occur at the same t
e.g.) 323
ime. In that case, the su
um of last two digit appears as result
480 Corrected value exceeds
s the limit of correction
Table 3-2
• If TRC control performs normally, “Pass” count mu ust be non-zero value and “Fail” count must be zero.
• If “Fail” count is not zero, there is a cell that contains non-zero value at “Er(Y,M,C,K)” column and/or
“Loc(L,C,R)” column .
• If a value of certain color at “Er” column is non-zerro, the image density sensor needs to be checked.
• If “LED” value is lager than 1600, it indicates that shutter
s that cleans the image density sensor is not
working normally, and it has to be checked as well.
4--9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This menu displays the jam Counts of the system. Us sers can select one jam group, which indicates the
location of jams, and press “OK” to see a detailed jam
m location along with the occurrence of the jam.
The following table shows the jam groups defined forr the system :
4-1
11
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Table 4-1
4-1
12
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The following table shows groups of the replaceable parts of the system.
Table
e 4-2
4-1
13
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4.5. Diagnostics
4-1
14
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-1
15
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Table
e 5-1
4-1
16
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-1
17
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-1
18
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-1
19
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-2
20
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-2
21
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-2
22
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Table 5-2
4-2
23
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
P
Purpose T change
To h a configuration
fi ti value
l e for
f fax
f firmware.
fi
Operation When the main “NVM Read/Wriite” window displays, users can navigate through
Procedure the list of configuration values th
hat display along with description.
Users can also input a code to thet text box to find a configuration value directly.
After selecting one value, pressing “Edit” button will open an interface for user
input.
Verification N/A
Specification N/A
Reference N/A
Code Code
Displayed Name
N Default
(Line 1) (Line 2)
20-200 21-200 Pause Dial Time 1
20-210 21-210 Dial Pulse M/B ratio 0
20-220 21-220 Auto Dial Start Pause Time
T 1
20-300 21-300 Ring On Time 170
20-310 21-310 Ring Off Time 560
20-320 21-320 Ring Detection Freq 1
20-400 21-400 DTMF High-Freq Level 8
20-410 21-410 DTMF Low-Freq Level 11
20-420 21-420 DTMF Timing 5
20-520 21-520 Error Rate 2
20-530 21-530 Dial Tone Detect 0
20-540 21-540 Loop Current Detect 0
20-550 21-550 Busy Signal Detect 0
20-700 21-700 Line Monitor Setting 0
20-800
20 800 21-800
21 800 Modem Speed 7
20-810 21-810 Fax Transmission Level 12
20-830 21-830 Auto Dial Timeout 55
20-999 21-999 Fax Line Setting
Table
e 5-3
4-2
24
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-2
25
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Table
e 5-4
4-2
26
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Purpose To check quality of scanned ima ages, especially defect in optical devices, including
lens, mirror, lamp, and etc, are suspected.
s
Operation Press "Share and Print report“ to
o see if the current shading value is correct.
Procedure Mono, red, green, blue gray shaading values will be shown on the printed report.
When the previous shading valu ue is needed, press “Print Last Shade Report”.
Verification N/A
Specification N/A
Reference N/A
Table
e 5-5
4-2
27
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-2
28
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Table
e 5-6
4-2
29
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4.5.4. Adjustment
4.5.4.1. Print Adjustment
• Diagnostics > Adjustment > Print Adjustmen
nt > Automatic Adjustment
P
Purpose T correctt iimage position
To iti off prin
int-outs
t t automatically.
t ti ll
ⓒ or ⓖ = 402.5 mm
m -25
ⓓ or ⓗ = 275.3 mm
m +17
ⓓ or ⓗ = 278.9 mm
m -19
Verification Print out and measure if the length of vertical (400mm) and horizontal line
(277mm) in the print-out are corrrect.
Specification ⓒ,ⓖ : 400mm, ± 1.5mm (A3)
ⓓ,ⓗ : 277mm, ± 1.5mm (A3)
Reference Figure 5-1, 5-2
Example Sim
mplex Simplex Duplex Duplex
Cases Lea
ading Side Edge Leading Side Edge
Ed
dge Edge
ⓐ = 8.5 mm +
+15
ⓑ = 11.6 mm -16
ⓔ = 8.0
8 0 mm +20
ⓕ = 13.0 mm -30
4-3
31
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Example Simp
plex Simplex Simplex Simplex
Cases Lead
ding Side Edge Leading Side Edge
Edg
ge Edge
ⓐ = 11.5 mm -1
15
ⓑ = 8.4 mm -16
ⓔ = 12.0 mm -20
ⓕ = 7.0 mm +30
Verification 1. Copy the Scanner A/S Charrt . Scanning must be occur at the scanner glass .
2. Check if all the position of scale marks (ⓐ,ⓑ, ⓔ,ⓕ ) in the image are located
within the specified limit.
Specification ⓐ,ⓑ,ⓔ,ⓕ : 10mm, ± 1.5mm
Reference Figure 5-1, 5-2
4-3
32
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Figure 5-3, A4 Sc
canner A/S Cart
4-3
33
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
ⓑ = 9.0 mm +10
4-3
34
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4-3
35
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
ⓑ = 8.8 mm -12
4-3
36
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Operation 1. Choose one item from the table. There are four items to choose.
Procedure • Booklet Folding Position – Group
G 1 (Sheet Length < 288.0 mm)
• Booklet Folding Position – Group
G 2 (288.0mm <= Sheet Length <358.5mm)
• Booklet Folding Position – Group
G 3 (358.5mm <= Sheet Length <426.0mm)
• Booklet Folding Position – Group
G 4 (426.0mm <= Sheet Length)
2. Select one item and press th
he edit button.
3. Change the adjustment valuue with arrow button. Input + value in “Case 1”
shown below. Input
p – value in “Case 2” shown below.
Case 1 Case 2
4. Press the “OK” button to apply the new value to the system.
Verification Print out a booklet and check the folding position is located at the center.
Specification
Group P
Paper Size ‘A’ Dimension
Reference A
Lead Trail
Edge Edge
Folding
Line
4-3
37
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Operation 1. Choose one item from the table. There are two items to choose.
Procedure • Punch Hole DOF Position – Direction of feeding position
• Punch Hole STS Position – Side
S to side position
position. That is perpendicular to DOF
position
2. Select one item and press th he edit button.
3. Change the adjustment valu ue with arrow button. + value moves the position
to lead edge, while - value moves the position to trail edge.
4. Press the “OK” button to apply the new value to the system.
Verification heck the punch hole position is located as adjusted.
Print out with punch hole and ch
Specification 0 Min/Max: ±50mm
DOF Position Unit: mm, Scale: 0.1,
0 Min/Max: ±50mm
STS Position Unit: mm, Scale: 0.1,
Reference N/A
Front Cover
4-3
38
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Purpose To correct alignment of print outt stack at finishing tray. Note that use of this
function would be very rare and would be required if the size of paper is not
standardized.
Operation 1.
1 Choose one item from the table.
table There are two items to choose
choose.
Procedure •Front Tamper Position (ⓐ)
•Rear Tamper Position (ⓑ)
2. Select one item and press th he edit button.
3. Change the adjustment valu ue with arrow button. + value moves the position
to rear position, while - valu
ue moves the position to front position.
4. Press the “OK” button to apply the new value to the system.
Verification Print out and check the stack of paper is aligned correctly
correctly.
Specification m, Scale: 0.1, Min/Max: ±50mm
Front Tamper Position Unit: mm
Rear Tamper Position Unit: mm, Scale: 0.1, Min/Max: ±50mm
Reference
Rear
Finisher
Finishing Tray
Front
Front Cover
4-3
39
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Purpose To set the color sensing level off auto color mode in copy function.
O
Operation
ti Change th
Ch the llevell ffrom 1 tto 5
5.
Procedure While the level 1 is the most color sensitive, the level 5 is the most monochrome
sensitive.
Verification N/A
Specification
Level 1 Level 2 Level 3 Level 4 Level 5
Color 01%
0.1 04%
0.4 10%
1.0 15%
1.5 20%
2.0
Coverage
Reference N/A
4-4
40
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Note that ACR execution occurs s when one of the ACR option meets the condition.
Also note that pressing “Executte Now” performs an immediate ACR execution.
Verification Compare the original with a cop
py after an execution of Auto Color Registration.
Specification
Deffault Min. Value Max. Value
Page Condition 10
000 200 5000
Inner 0 1 100
Temperature
LSU 4 1 100
Temperature
Reference CLX-9250/9350 Series Service Manual, Chapter 7.3.6 Incorrect Color Registration
CLX-9250/9350 Series Service Manual, Chapter 7.3.17 White Halo
4-4
41
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
White Halo
Incorrect Color Registration
n (white gap between text and background)
4-4
42
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
• Diagnostics > Color Management > Auto Collor Tone Adjustment > Normal TRC Control
Purpose To correct image quality when density of the image is poor. Normal TRC Control
is recommended to be p performed after changing
g g a unit,, such as toner cartridge,
g ,
imaging unit, and ITB, and rebo
oot.
Low Image
g Density
y Gradation Reproduction
p Failure
4-4
43
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
• Diagnostics > Color Management > Auto Collor Tone Adjustment > Quick TRC Control
Purpose To correct image quality when density of the image is poor. This function performs
when temperature and/or humidity in the room changes suddenly.
Note that Quick TRC control takes a little more than 10 seconds to run while
Normal TRC control takes apprroximately 40 seconds.
Operation Change execution condition of Quick TRC Control.
Procedure • Page Count: The system executes Quick TRC Control based on the count of
st execution.
printed pages since the las
4-4
44
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
• Diagnostics > Color Management > Auto Collor Tone Adjustment > ID Sensor Calibration
4. The arrow in left top of the test pattern need s to head to the left-top side of
scan glass and to be placed face down.
5. Run the pattern scanning by b pressing “OK” button.
6. After scanning, run Normall TRC by pressing “OK” button.
7. Exit ID Sensor Calibration mode.
m
Verification Print out a test job and make su
ure the difference in image quality between sets
has disappeared.
Specification N/A
Reference N/A
4-4
45
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
This function resets the main memory of the system to t the factory default setting. It can be used to reset
the system to the initial value when the product is fun
nctioning abnormally. All the user configured values
return to the default values.
To clear the main memory, users need to select the country
c of the system locates, and rebooting of the
system is required.
This function formats all the user data, for example, box
b data, pending secure jobs, font, form, macro,
data related applications, and job log, on the hard dis
sk.
This function formats all the data that can be erased with 3 functions above. The function will NOT format
the hard disk entirely.
This ffunction
Thi ti checks
h k abbad
d sector
t iin th
the hard
h d didisk.
k If a bad
b d sector
t iis ffound,
d th
the system
t will
ill di
display
l an
error message and send an email notification to the system
s administrator.
4-4
46
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4.6.4. Port
• Service Functions > Port
This function enables/disables remote connections to o the system via telnet, OSGI command shell, and
SMB(samba) protocol.
Thi ffunction
This i can b be usedd when
h there
h iis a problem
bl that
h requires
i developers
d l to access the
h system or
when there is a need for developers to upload appliccations for a test.
Since enabling those ports can creates a risk of damaging data stored in the device, agreement of the
administrator of the customer site is necessary. The user must log in as the administrator to
enable/disable the services.
4 6 5 Capture Log
4.6.5.
• Service Functions > Capture Log
This function sets count of large page, such as A3 and ledger size, to 1 count or 2 count of the total
count. For example, the total use of 100 A4 impresssions and 100 A3 impressions will become 200
impressions if the configuration is set to “1 Count Up
p” while the total will be 300 impression if the
configuration is set to “2 Count Up”.
4-4
47
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Purpose To correct transfer related problems. This function can be used to change the
p
transfer value to optimize image
ge q
quality
y to a certain type
yp of p
paper.
p
Operation 1. T1 Control Problems
Procedure • Choose the process speed (Full, Half, Lower) based on the type of paper to
be used.
• Adjust T1 PWM value base ed on the problem type.
Gray Spot : Increas
se T1 PWM value of the issued color
Non Cyclic White Line
L : Decrease T1 PWM value of the issued color
OPC Cyclic Ghost : Decrease T1 PWM value of the issued color
2. T2 Control Problems
• Choose the paper group, pa aper side, and paper direction.
• Adjust T1 PWM value base ed on the problem type.
Blur : Increase T1 PWM
P value
Poor Transfer : Incrrease T1 PWM value
ReRe-transfer
transfer : Decre
ease T1 PWM value
White Spot : Decrease T1 PWM value
3. Blur Upgrade Mode : Turn on n the mode when black lines becomes blur.
4. OHP Upgrade Mode : Turn on o the mode when transfer on OHP becomes poor.
Note that this option needs to be turned on only if there is a transfer problem in
OHP printing.
i ti Most
M t off OHP type
t es can be
b usedd without
ith t thi
this option
ti turned
t d on.
Verification Print out a test job and make su
ure the transfer problem has resolved.
Specification N/A
Reference N/A
4-4
48
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Updating Firmware
5-1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5-2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5-3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9. The Installation window will list the files on the USB drive.
d Touch the name of the firmware file to select it,
and then press the [OK] button.
Note: Firmware file format type is *.hds or *.parr
10. The machine will analyze the firmware file to ensuree the file is not corrupt and that it is the correct file for
the machine. Wait for analysis to finish. The proc
cess will take a few minutes.
5-4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Validation Info
Item Description
Firmware Machine component to be updated
Version Comparison of the firmware upgrade file
f version and the installed firmware
Upper = Higher level firmware version
Lower = Lower level firmware version
Same = Same firmware version
Overwrite Allows a technician to override upgrad de logic and force the machine to install the firmware file
on the
th USB drive
d i regardless
dl off versio
i n
5-5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
13. Once the firmware upgrade process is complete, thee F/W Update Result window will display. This window
displays the results of the firmware upgrade, and indicates that the firmware process completed
successfully. Press the Close button. The machine will reboot completing the firmware upgrade process.
5-6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Perform the following procedure to update the printerr firmware from the network
network.
5-7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5-8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[Model] indicates whether firmware model is matched with the MFP device.
[N: Same Version] means the device will not update firmware because it has already same version.
[[N: Option]
p ] means the MFP device will not update
p firmware because option
p is not equipped.
q pp
[N: System] means the MFP device will not update firmware because model is unmatched to MFP device.
5-9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
8. Once the installation is complete, the MFP device will provide final result.
5-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
PM kits packaged for each unit or group of parts with the same replacement number of output pages,
allows you to carry out efficient parts replacement.
6.1 PM Supplies
This section contains information about PM supplies and
a PM schedules. PM Supplies include the following:
PM Parts
PM Kits
6.1.1 PM Parts
Toner cartridge
CLT-Y606S CLT-Y6062S
Toner cartridge Y,M,C (C35) CLT-M606S CLT-M6062S R
CLT-C606S CLT-C6062S
CLT-Y607S CLT-Y6072S
Toner cartridge Y,M,C (C25/C35) CLT-M607S CLT-M6072S R
CLT-C607S CLT-C6072S
6-1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Imaging unit
Part code 75K 150K 225K 300K
CLT-R607Y
CLT-R607M
Imaging unit Y,M,C,K R R R R
CLT-R607C
CLT-R607K
Waste
aste Toner
o e Co
Container
ta e
Part code 75K 150K 225K 300K
Waste Toner Container CLT-W606 R R R R
WTB surrounding - C C
Paper Path
Part code 75K 150K 225K 300K
Pick Up Roller
JC93-00175A C C R C
(Tray 1,2,3,4, HCF)
Retard Roller
JC93-00175A C C R C
(Tray 1,2,3,4, HCF)
Forward Roller
JC93-00175A C C R C
(Tray 1,2,3,4, HCF)
MP Pick Up Roller JC90-00989A C R C R
MP Retard Roller JC90-00989A C R C R
MP Forward Roller JC90-00989A C R C R
p route,Guide
Transport , - C C C C
Sensor - C C C C
JC66-02359A
Duplex Roller ~ C C C C
JC66-02360A
6-2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Frame
Part code 75K 150K 225K 300K
LSU Window -
Fuser Unit
Part code 75K 150K 225K 300K
DADF
Part code 75K 150K 225K 300K
DADF Pick-up Roller JC97-03779A C C R C
DADF ADF Roller JC97-03779A C C R C
DADF Retard Roller JC97-03630A C C R C
DADF Retard Rubber Pad JC73-00323A C C C C
Transfer Unit
Part code 75K 150K 225K 300K
6-3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6.1.2 PM Kits
6-4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6.2 PM Procedures
This section contains the procedures you use to perform preventative maintenance on the printer.
1. Open the front door. 3. Remove the new toner cartridge from its bag.
2. Pull the corresponding toner cartridge out from 4. Carefully pull the seal tape out of the toner
the machine. cartridge.
6-5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Thoroughly roll the cartridge five or six times to 7. Close the front door. Ensure that the door is
distribute the toner evenly inside the cartridge. securely closed.
6-6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Open the front door. 3. Hold and push down the lever, and open the
inner cover.
2. Hold the left/right locking levers and push 4. Pull the corresponding imaging unit out from
outward at the same time. Then remove the waste the machine.
toner container.
6-7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Remove the new imaging unit from its package. 7. Remove the tape on the handle.
CAUTION
Do not use sharp objective, such as a knife or
scissors, to open the imaging unit package. You
could damage the surface of the imaging unit.
6. Remove the paper protecting the surface of the 8. Pull the rubber stopper out of the developer.
g g unit.
imaging
6-8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9. Remove the tape wrapped around the developer. 11. Pull out the OPC protecting pad.
CAUTION
-Be careful not to scratch the surface of the
imaging unit.
6-9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
12. Hold the handles on the new imaging unit, 14. Take out the LSU window cleaning Jig[A].
and push the imaging unit until it locks into place.
A
1
6-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
16. Insert the waste toner container until it locks 17. Close the front door. Ensure that the door is
in place. securely closed.
6-1
11
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A] CAUTION
Be careful not to hurt yourself while removing
the waste toner container.
6-1
12
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
6-1
13
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
6-1
14
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
Do not touch the surface of the transfer roller.
6-1
15
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
CAUTION
The temperature gets hot around the Fuser Unit. To prevent burns, make sure the Fuser Unit area is cool
b f
before performing
f i this
hi procedure.
d
[A]
6-1
16
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
When replacing the pick up roller, it is
recommended that you replace all three rollers
at the same time.
CAUTION
Be careful not to hurt yourself by the drawer
rail.
6-1
17
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
In case that the finisher is installed, first
remove it then replace the filter.
6-1
18
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
s that three rollers should be replaced at once.
When replacing DADF rollers, Samsung recommends
1 Open
1. O the
th DADF cover.
CAUTION
When replacing DADF rollers, be careful not to break or
o bend the actuator.
6-1
19
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6-2
20
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6-2
21
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6-2
22
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6-2
23
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
NOTE
When replacing pick up roller, Samsung
recommands that three rollers should be
replaced at once.
6-2
24
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[B]
NOTE
When replacing pick up roller, Samsung
recommands that three rollers should be
replaced at once.
6-2
25
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
g alcohol is the Isopropyl
The cleaning p py alcohol.
6-2
26
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6-2
27
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. O
1 Open th
the C
Cover-Side
Sid
2. Clean the Tray1 Feed roller[A] by using a
cleaning pad with alcohol.
[A]
6-2
28
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[A]
[B]
6-2
29
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
[ ]
[A]
6-3
30
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
6-3
31
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
NOTE
rollers refer to 6.2.9.
For disassembling the rollers, 629
6-3
32
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Note
The feed sensor contamination may make the jam m error.
Please clean the feed sensor reqularly. (Approx. 150K)
[ Contaminated Sensor]
6-3
33
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7. Troubleshooting
This chapter describes how to troubleshooting the prrinter. Troubleshooting is explained using two
approaches:
■ A step-by-step verification procedure that system matically confirms that particular components of the
printer are properly functioning until a problem is found.
found
■ An error code detail table shows the error codes,, their possible causes, and troubleshooting.
7.1.1 System
y p
power-up
p sequence
q
7--1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Environment
Media
1. Ch
1 Checkk if th
the media
di iis supported
t d within
ithi specificatio
ifi tions.
2. Ensure that the paper size in the printer driver setttings matches the paper selection in the software
application settings you use.
3. Check if the media is curled, folded.
Component
1. Check if the toner cartridges and imaging units aree installed correctly.
2. Check if the Fuser unit and cartridge transfer unit are
a installed correctly.
3. Check if the front cover and side cover are closed.
7--2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
A1-2311
A1 2311 Actuator Motor Failure #A1
#A1-2311:
2311: Please open/close door. 7-19
7 19
7--3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
Troubleshooting
Error Code Error Mes
ssage
Page
C1-3110 Prepare new magenta toner cartridg
ge. 7-32
C1-3514 Cyan imaging unit is not compatible. Check user's guide. 7-38
C1-4514 Cyan imaging unit is not compatible. Check user's guide. 7-38
C1-5411 Black toner cartridge is not installed. Install the cartridge. 7-35
C3-1422 Imaging unit requires charger's cleaning. Clean the unit. 7-39
C3-2211 Yellow Imaging Unit Failure #C3-2211:. Turn off then on. 7-42
7--5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
C3-2312 Yellow Imaging Unit Failure #C3-2312:Please open/close door. 7-43
Yellow Imaging Unit Failure #C3-2313: Install yellow imaging unit
C3-2313 7-44
again
again.
C3-2422 Yellow imaging unit requires charger's cleaning. Clean the unit. 7-39
C3-2514 Yellow imaging unit is not compatible. Check user's guide. 7-47
C3-3411
C3 3411 Magenta imaging unit is not installed
d. Install it. 7-46
7 46
C3-3512 Magenta imaging unit is not compatible. Check user's guide. 7-47
C3-3514 Magenta imaging unit is not original Samsung. Check user's guide. 7-47
C3-4512
C3 4512 Cyan imaging unit is not compatible. Check user's
user s guide. 7-47
7 47
7--6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
C3-4514 Cyan imaging unit is not compatible. Check user's guide. 7-47
C3-5110 Prepare new black imaging unit. 7-40
C3 5130
C3-5130 R l
Replace with
ith new bl
black
k iimaging
i unit
it. 7 41
7-41
C3-5140 Replace with new black imaging unit. 7-41
C3-5211 Black Imaging Unit Failure #C3-5211:Turn off then on. 7-42
Black Imaging Unit Failure #C3-5312
2: Install black imaging unit
C3-5312 7-43
again.
Black Imaging Unit Failure #C3
#C3-5313
5313
3: Install black imaging unit
C3 5313
C3-5313 7 44
7-44
again.
C3-5321 Black Imaging Unit Failure #C3-5321: Turn off then on. 7-45
C3-5411 Black Imaging unit is not installed. Ins
stall it. 7-46
C3-5422 Black imaging unit requires charger's
s cleaning. Clean the unit. 7-39
C3-5512 Black imaging unit is not original Sam
msung. Check user's guide. 7-47
C3-5514 Black imaging unit is not original Sam
msung. Check user's guide. 7-47
C5-1110 Prepare new transfer belt unit. 7-48
C5-1120 Replace with new transfer belt unit. 7-49
C5-1231 ITB Unit Failure #C5-1231:Turn off th
hen on. 7-50
C5-1232 ITB Unit Failure #C5-1232:Turn off th
hen on. 7-51
C5-1311 Transfer belt is not installed. Install it. 7-52
C5-1412 Transfer belt is not compatible. Chec
ck user's guide. 7-53
C5-1414 Image transfer belt unit is not original Samsung. Check user's guide. 7-53
C5-1521 ITB Unit Failure #C5-1521: Turn off then on. 7-54
C5-1531 ITB Unit Failure #C5-1531: Turn off then on. 7-55
C5-1541 ITB Unit Failure #C5-1541:Turn off th
hen on. 7-54
C5-1551 ITB Unit Failure #C5-1551:Turn off th
hen on. 7-56
C5-1621 ITB Unit Failure #C5-1621: Turn off then on. 7-57
C5-1631 ITB Unit Failure #C5-1631: Turn off then on. 7-57
C5-1641 ITB Unit Failure #C5-1641: Turn off then on. 7-57
C5-1651 ITB Unit Failure #C5-1651: Turn off then on. 7-57
C5-2110 Prepare new transfer belt cleaning unit.
u 7-58
C5-2120 Transfer belt cleaning unit is worn. Replace
R with new one. 7-58
C5-2311 Transfer belt cleaning unit is not insttalled. Install it. 7-59
C5-2412 Transfer belt cleaning is not compatib
ble. Check user's guide. 7-60
7--7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
C5-3110 Prepare new Transfer roller. 7-61
C5-3120 Replace with new Transfer roller. 7-61
C6 1110
C6-1110 Prepare new fuser unit
unit. 7 62
7-62
C6-1120 Replace with new fuser unit. 7-62
C6-1311 Fuser unit is not installed correctly. In
nstall it. 7-63
C6-1412 Fuser unit is not compatible. Check user's
u guide. 7-64
C7-1110 Waste toner container is almost full. Order
O new one. 7-65
C7 1130
C7-1130 Waste toner container is full.
full Replace
e it 7 65
7-65
C7-1311 Waste toner container is not installed
d. Install it. 7-66
C9-1112 Replace with new Tray1 pickup rollerr. 7-67
C9-1122 Replace with new Tray2 pickup rollerr. 7-67
C9-1132 Replace with new Tray3 pickup rollerr. 7-67
C9-1142 Replace with new Tray4 pickup rollerr.
r 7-67
C9-1162 Replace with new MP pickup roller. 7-68
H1-1311 Paper jam in tray 3. 7-69
H1-1312 Paper jam in tray 3. 7-70
H1-1317 Paper jam inside of machine. 7-69
H1-1318
H1 1318 Paper jam in tray 3.
3 7 69
7-69
H1-1322 Tray 3 cassette is pulled out. Insert itt properly. 7-71
H1-1351 Paper is low in Tray 3. Load paper. 7-72
H1-1352 Paper is empty in Tray 3. Load paperr. 7-73
Input System Failure: #H1-1353. Call for service if the problem
H1-1353 7-74
persists.
H1-1411 Paper jam in tray 4. 7-75
H1-1412 Paper jam in tray 4. 7-76
H1-1417 Paper jam inside of machine. 7-75
H1-1418 Paper jam in tray 4. 7-75
H1-1422 Tray 4 cassette is pulled out. Insert itt properly. 7-71
H1-1451 Paper is low in Tray 4. Load paper. 7-71
H1-1452 Paper is empty in Tray 4. Load paperr. 7-73
Input System Failure: #H1-1453. Call for service if the problem
H1-1453 7-74
persists.
H1-3330 Input System Failure: #H1-3330. Che
eck HCF connection. 7-77
H1 5330
H1-5330 Input System Failure: #H1-3330.
#H1 3330 Che
eck DCF connection
connection. 7 77
7-77
7--8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
H2-2001 Paper jam at exit of finisher bridge. Refer to finisher SM
H2-2002 Paper jam inside of finisher. Refer to finisher SM
H2-2003 Paper jam inside of finisher. Refer to finisher SM
H2-2005 Paper jam at entrance of finisher brid
dge. Refer to finisher SM
H2-2008 Paper jam at entrance of finisher. Refer to finisher SM
H2-2009 Paper jam at exit of finisher. Refer to finisher SM
H2-2010 Paper jam at exit of finisher. Refer to finisher SM
H2-2012 Paper jam inside of finisher bridge. Refer to finisher SM
H2-2014 Paper jam around puncher of finishe
er. Refer to finisher SM
H2-2129 Finisher Error #H2-2129. Please ope
en/close door. Refer to finisher SM
H2-2193 Finisher Error #H2-2193. Please ope
en/close door. Refer to finisher SM
H2-2257
H2 2257 Finisher Error #H2
#H2-2257.
2257. Please ope
en/close door. Refer to finisher SM
H2-2322 Finisher Error #H2-2322. Please ope
en/close door. Refer to finisher SM
H2-2386 Finisher Error #H2-2386. Please ope
en/close door. Refer to finisher SM
H2-2449 Finisher Error #H2-2449. Please ope
en/close door. Refer to finisher SM
H2-2453 Finisher Error #H2-2453. Please ope
en/close door. Refer to finisher SM
H2 2463
H2-2463 Fi i h Error
Finisher E #H2-2463.
#H2 2463 Please
Pl ope
en/close
/ l d
door. Refer to finisher SM
H2-2513 Finisher Error #H2-2513. Please ope
en/close door. Refer to finisher SM
H2-2522 Finisher Error #H2-2522. Please ope
en/close door. Refer to finisher SM
H2-2577 Finisher Error #H2-2577. Please ope
en/close door. Refer to finisher SM
H2-2581 Finisher Error #H2-2581. Please ope
en/close door. Refer to finisher SM
H2-2589 Finisher Error #H2-2589. Please ope
en/close door. Refer to finisher SM
H2-2705 Finisher Error #H2-2705. Please ope
en/close door. Refer to finisher SM
H2-2713 Finisher Error #H2-2713. Please ope
en/close door. Refer to finisher SM
H2-2775 Booklet maker Error #H2-2775. Plea
ase open/close door. Refer to finisher SM
H2-2778 Booklet maker Error #H2-2778. Plea
ase open/close
p door. e e to finisher
Refer s e SSM
H2-2779 Finisher Error #H2-2779. Please ope
en/close door. Refer to finisher SM
H2-3002 Paper jam at entrance of booklet maker. Refer to finisher SM
H2-3005 Paper jam inside of booklet maker. Refer to finisher SM
H2-3007 Paper jam before booklet folding. Refer to finisher SM
H2 3194
H2-3194 Paper jam after booklet folding.
folding R f tto fifinisher
Refer i h SM
7--9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mess
sage
Page
H2-3257 Booklet maker Error #H2-3257. Pleas
se open/close door. Refer to finisher SM
H2-3321 Booklet maker Error #H2-3321. Pleas
se open/close door. Refer to finisher SM
H2-3385 Booklet maker Error #H2-3385. Pleas
se open/close door. Refer to finisher SM
H2-3449 Booklet maker Error #H2-3449. Pleas
se open/close door. Refer to finisher SM
H2-3578 Booklet maker Error #H2-3578. Pleas
se open/close door. Refer to finisher SM
H2-3641 Booklet maker Error #H2-3641. Pleas
se open/close door. Refer to finisher SM
H2-3705 Booklet maker Error #H2-3705. Pleas
se open/close door. Refer to finisher SM
H2-3769 Booklet maker Error #H2-3769. Pleas
se open/close door. Refer to finisher SM
M1-1113 Paper jam in tray 1. 7-78
M1-1213 Paper jam in tray 2. 7-79
M1-1610 Paper jam in MP tray. 7-80
M1-3122 Tray
y 1 cassette is pulled
p out. Insert itt p
properly.
p y 7-71
M1-3222 Tray 2 cassette is pulled out. Insert itt properly. 7-71
M1-5111 Paper is low in tray 1. Load paper. 7-72
M1-5211 Paper is low in tray 2. Load paper. 7-72
M1-5112 Paper is empty in tray 1. Load paper. 7-73
M1 5212
M1-5212 Paper is empty in tray 2
2. Load paper. 7 73
7-73
M1-4111 Input System Failure #M1-4111 : Pull tray 1 out and insert it. 7-74
M1-4211 Input System Failure #M1-4111 : Pull tray 2 out and insert it. 7-74
M2-1121 Paper jam inside of machine. 7-81
M2-1124 Paper jam inside of machine. 7-81
7-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
M2-2411 Paper
p jjam at the top
p of duplex
p p
path. 7-88
M2-2413 Paper jam at the return of duplex patth. 7-88
M2-2414 Paper jam at the top of duplex path. 7-88
M3-1211 Paper jam in exit area. 7-89
M3-1213 Paper jam in exit area. 7-89
M3 1214
M3-1214 Paper jam in exit area
area. 7 89
7-89
7-1
11
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
S1-2411 HDD System Failure #S1-2411: Turn
n off then on. 7-98
S1-2421 HDD System Failure #S1-2421: Turn
n off then on. 7-98
S1-2422 HDD System Failure #S1-2422:Turn off then on. 7-98
S1-2433 HDD System Failure # S1-2433 : Call for service. 7-99
S1-2434 HDD is almost full_1. Check user's guide. 7-100
S1-2435 HDD is almost full_2. Check user's guide. 7-100
S1-2436 HDD is almost full_3. Check user's guide. 7-100
S1-2437 HDD is almost full_4. Check user's guide. 7-100
S1-2438 HDD is almost full_5. Check user's guide. 7-100
S1-2439 HDD is almost full_6. Check user's guide. 7-100
S1-2443 HDD System Failure #S1-2443 : Calll for service. 7-99
S1-2444
S1 2444 HDD System Failure #S1
#S1-2444
2444 : Calll for service.
service 7-99
7 99
S1-2445 HDD System Failure #S1-2445 : Calll for service. 7-99
S1-2446 HDD System Failure #S1-2446 : Calll for service. 7-99
S1-2447 HDD System Failure #S1-2447 : Calll for service. 7-99
S1-2448 HDD System Failure #S1-2448 : Calll for service. 7-99
S1 2449
S1-2449 HDD S
System
t F
Failure
il #S1
#S1-2449
2449 : C
Calllll ffor service.
i 7 99
7-99
S1-2510 MSOK System Failure #S1-2510:Turrn off then on. 7-101
S1-2511 MSOK System Failure #S1-2511:Turrn off then on. 7-102
S1-3110 Video System Failure #S1-3110: Turrn device off then on. 7-103
S1-4111 Video System Failure #S1-4111:Turn
n off then on. 7-104
S1-4311 Video System Failure #S1-4311:Turn
n off then on. 7-105
S1-5221 hen on.
System Failure #S1-5221 : Turn off th 7-107
S1-5321 Fax modem card is not installed. Insttall the card. 7-108
S1-5421 Second fax modem card is not installed. Install the card. 7-109
S1-5521 FDI device is not installed. Install the
e device. 7-110
S1-5621 ICON device is not installed. Install th
he device. 7-111
S2-1211 Engine System Failure #S2-1211:Turn off then on. 7-112
S2-1511 Engine System Failure #S2-1511:Turn off then on. 7-113
S2-2211 #S2-2211 Call for service 7-114
S2 2311
S2-2311 Engine System Failure #S2
#S2-2311:Tu
2311:Turn off then on
on. 7 115
7-115
7-1
12
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
S2-3110 Engine System Failure #S2-3110:Turn off then on. 7-116
S2-3114 Engine System Failure #S2-3114:Turn off then on. 7-117
S2-3115 Engine System Failure #S2-3115: Tu
urn off then on. 7-118
S2-4210 Front door is open. Close it. 7-119
S2-4410 Right door is open. Close it. 7-119
S2-4A10 Feed Door is opened. Close the doorr. 7-119
S2-4B10 Option Feed is opened. Close the do
oor. 7-120
S3-3111 Scan System Failure #S3-3111:Turn off then on. 7-121
S3-3121 Scanner locking screw is locked or another problem occurred. 7-122
S3-3211 Scan System Failure #S3-3211:Turn off then on. 7-123
S4-3111 Fax System Failure #S4-3111:Turn off
o then on. 7-124
S5-3111 UI System Failure #S5-3111:Turn offf then on. 7-125
S6-3122 Network cable is disconnected. Chec
ck it 7-126
U1-2113 Fuser Unit Failure #U1-2113: Turn offf then on. 7-127
U1-2115 Fuser Unit Failure #U1-2115: Turn offf then on. 7-128
U1-2119 Fuser Unit Failure #U1-2119: Turn offf then on. 7-127
U1-2131 Fuser Unit Failure #U1-2131: Turn offf then on. 7-129
U1-2132 Fuser Unit Failure #U1-2132: Turn offf then on. 7-130
U1-2134 Fuser Unit Failure #U1-2134: Turn offf then on. 7-129
U1-2135 Fuser Unit Failure #U1-2135: Turn offf then on. 7-130
U1-2141 Fuser Unit Failure #U1-2141: Turn offf then on. 7-131
U1-2142
U1 2142 Fuser Unit Failure #U1
#U1-2142:
2142: Turn offf then on.
on 7-131
7 131
U1-2211 Fuser Unit Failure #U1-2211: Turn offf then on. 7-132
U2-2111 Yellow LSU Unit Failure #U2-2111:Turn off then on. 7-133
U2-2112 Yellow LSU Unit Failure #U2-2112: Turn
T off then on. 7-134
U2-2113 Yellow LSU Unit Failure #U2-2113:Turn off then on. 7-135
U2 3111
U2-3111 Magenta LSU Unit Failure #U2-3111
#U2 3111: Turn off then on
on. 7 133
7-133
U2-3112 Magenta LSU Unit Failure #U2-3112: Turn off then on. 7-134
U2-3113 Magenta LSU Unit Failure #U2-3113:Turn off then on. 7-135
U2-4111 Cyan LSU Unit Failure #U2-4111: Tu
urn off then on. 7-133
U2-4112 Cyan LSU Unit Failure #U2-4112: Tu
urn off then on. 7-134
7-1
13
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Troubleshooting
Error Code Error Mes
ssage
Page
U2-4113 Cyan LSU Unit Failure #U2-4113:Turn off then on. 7-135
U2-5111 Black LSU Unit Failure #U2-5111: Tu
urn off then on. 7-133
U2-5112 Black LSU Unit Failure #U2-5112: Tu
urn off then on. 7-134
U2-5113 Black LSU Unit Failure #U2-5113: Tu
urn off then on. 7-135
U2-6111 LSU Unit Failure #U2-6115: Turn offf then on. 7-136
U3-1310 Actuator Fan Failure #U3-1310: Turn
n off then on. 7-24
U3-1311 Actuator Fan Failure #U3-1311: Turn
n off then on. 7-24
U3-3111 Original paper jam in front of scanne
er. 7-137
U3-3113 Original paper jam in front of scanne
er. 7-137
U3-3114 Original paper jam in front of scanne
er. 7-137
U3-3211 Original paper jam in front of scanne
er. 7-138
U3-3213
U3 3213 Original paper jam inside of scannerr.
r 7-138
7 138
U3-3214 Original paper jam in front of scanne
er. 7-138
U3-3311 Original paper jam inside of scannerr. 7-139
U3-3313 Original paper jam inside of scannerr. 7-139
U3-3314 Original paper jam inside of scannerr. 7-139
U3-3411 Original paper jam inside of scannerr. 7-140
U3-3413 Original paper jam inside of scannerr. 7-140
U3-3414 Original paper jam inside of scannerr. 7-140
U3-3511 Original paper jam inside of scannerr. 7-141
U3-3513 Original paper jam inside of scannerr. 7-141
U3-3514 Original paper jam inside of scannerr. 7-141
U3-3611 Original paper jam in exit area of sca
anner. 7-142
U3-3613 Original paper jam in exit area of sca
anner. 7-142
U3-3614 Original paper jam in exit area of sca
anner. 7-142
U3-3711
U3 3 Original
O g a paper
pape jam
ja in exit
e t area
a ea of
o sca
anner.
a e 7-143
7 143
U3-3713 Original paper jam in exit area of sca
anner. 7-143
U3-3714 Original paper jam in exit area of sca
anner. 7-143
U3-4210 Top door of scanner is open. 7-144
Pick Up Cam Error. ADF Cover open n and close.
U3-4411 7-145
Call for service if the p
problem p
persistts.
7-1
14
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
Fuser/Exit drive
motor
● Replacement part
7-1
15
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-1
16
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Remove the yellow OPC BLDC motor and one of thhe OPC BLDC motors.
Install the removed yellow OPC BLDC motor to OP
PC BLDC position.
Execute the yellow OPC BLDC motor test on diagn
nostic mode.
K C M Y
7-1
17
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
K C M Y
● Replacement part
7-1
18
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Remove the Magenta OPC BLDC motor and one of o the OPC BLDC motors.
Install the removed Magenta OPC BLDC motor to OPC
O BLDC position.
Execute the Magenta OPC BLDC motor test on dia
agnostic mode.
K C M Y
7-1
19
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Remove the Cyan OPC BLDC motor and one of the e OPC BLDC motors.
Install the removed Cyan OPC BLDC motor to OPCC BLDC position.
Execute the OPC BLDC motor test on diagnostic mode.
m
K C M Y
7-2
20
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Remove the black OPC BLDC motor and one of thee OPC BLDC motors.
Install the removed black OPC BLDC motor to OPC
C BLDC position.
Execute the black OPC BLDC motor test on diagno
ostic mode.
K C M Y
7-2
21
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-2
22
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. If the problem persists, remove the rear cover and open the Main board plate.
4. Remove the yellow/magenta/cyan/black toner moto or and one of the toner motors.
Install the removed yellow/magenta/cyan/black tone
er motor to toner position.
Execute the yellow/magenta/cyan/black toner motor test on diagnostic mode.
Toner motor
7-2
23
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Fan does not operate.
- Fan overheats. / There is any foreign matter around
d the fan.
● Troubleshooting method :
● Replacement part
K Imaging
g g Unit : CLT-R607K
C Imaging Unit : CLT-R607C
M Imaging Unit : CLT-R607M
Y Imaging Unit : CLT-R670Y
7-2
25
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
y p / Cause :
Calibration for density sensor is failed
● Troubleshooting method :
● Replacement part
7-2
26
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
y p / Cause :
● Replacement part
7-2
27
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
CAUTION
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned.
oled.
Before replacing it, make sure that fuser unit has coo
1. O
1 Open th
the CCover-Side.
Sid
2. Remove 2 fuser locking screws.
3. Remove the Fuser unit by holding the
handles [A].
[A]
● Replacement part
7-2
28
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Replacement part
7-2
29
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Replacement part
7-3
30
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Replacement part
7-3
31
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-3
32
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-3
33
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Specially when toner cartridge is initial install time (total printed pages is under 1,000 page), check if the
seall off ttoner cartridge
t id iis removed.
d
2. Thoroughly roll the cartridge five or six times to disttribute the toner evenly inside the cartridge.
● Replacement part
7-3
34
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-3
35
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1 O
1. Open ththe ffrontt d
door.
2. Pull the corresponding toner cartridge out from the machine.
3. Thoroughly roll the cartridge five or six times to disttribute the toner evenly inside the cartridge.
● Replacement part
7-3
36
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-3
37
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-3
38
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
The charger of imaging unit need to clean after the specified number of paper is printed out.
● Troubleshooting method :
● Replacement part
7-3
39
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-4
40
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-4
41
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Sensor calibration error that detects the toner density for image stabilization control has occurred.
3. Check if values of the LedF, LedR, LedC on TRC re eport are in 400~800 scope.
If the value is in this scope, it is normal. If or not, the
e image density sensor is contaminated.
So, take off the ITB unit and clean the window of the e ITB unit with soft cloth.
Re-install the ITB unit and turn the machine off and turn it on again.
Execute the image density control.
If values of the LedF, LedR, LedC are 1675, CTD se ensor shutter has any problem. Replace the T2 unit.
4. Print the TRC Test Report. Check if the TRC generration error is occurred.
If error has occurred,
occurred replace the imaging unit
unit.
5. Print the supply information report, check if the temporary hard stop has occurred.
7-4
42
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Replacement part
7-4
43
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement
7-4
44
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open and close the door or turn off the machine the
en on.
● Replacement
7-4
45
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Replacement part
7-4
46
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-4
47
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
Check the life remaining of the transfer belt unit (or transfer
t belt cleaning unit).
If its life is at the end, turn the machine off and repla
ace the transfer belt unit (or transfer belt cleaning unit)
with new one.
● Replacement part
7-4
48
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-4
49
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
CAUTION
Reassembling the cartridge transfer unit
● Replacement part
7-5
50
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
CAUTION
Reassembling the cartridge transfer unit
● Replacement part
7-5
51
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-5
52
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Transfer belt is not compatible with this machine. Inforrmation between EEPROM and Transfer belt unit are
different from each other.
● Troubleshooting method :
2. Print the supply information report and check the mo odel name of the transfer belt unit.
If it is not a Samsung product, replace the transfer belt unit with new one.
● Replacement
p part
p
7-5
53
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open and close the door. Turn the machine off and on.
2. If the problem persists, replace the ITB unit.
CAUTION
Reassembling the cartridge transfer unit
● Replacement part
- JC96-05689A
JC96 05689A : CARTRIDGE
CARTRIDGE-TRANSFER
TRANSFER ITB
7-5
54
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
The machine can not detect the position movement off the transfer roller 2 within the programmed time.
● Troubleshooting method :
● Replacement part
7-5
55
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-5
56
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open and close the door. Turn the machine off and on.
2. If the problem persists, replace the ITB unit.
CAUTION
Reassembling the cartridge transfer unit
● Replacement part
7-5
57
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
y / Cause :
● Troubleshooting method :
● Replacement part
7-5
58
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC96
JC96-05690A
05690A : CARTRIDGE-TRANSFER
CARTRIDGE TRANSFER ITB CLEA
AN
7-5
59
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-6
60
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
y / Cause :
● Troubleshooting method :
CAUTION
Please don’t touch the surface of the transfer
roller.
● Replacement part
7-6
61
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
2. Print the supply information report and check the fuser unit life.
● Replacement part
7-6
62
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
2. Open the side door and check if the fuser unit is insstalled properly.
● Replacement part
7-6
63
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-6
64
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
3. Remove the new waste toner container from its pac ckage.
4. Insert the new waste toner container until it locks in place.
7-6
65
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
3. Remove the new waste toner container from its pac ckage.
4. Insert the new waste toner container until it locks in place.
7-6
66
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
1. Print the supply information report and check the lifee of the pick up roller.
2. Remove the cassette.
3. Lift small tap, remove the pick up roller. (Refer to chapter
c 6.)
2
1
NOTE
When replacing pick up roller, Samsung recommends
s that three rollers should be replaced at once.
7-6
67
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
NOTE
When replacing pick up roller, Samsung recommends
s that three rollers should be replaced at once.
● Replacement part :
7-6
68
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open the side & take away door. Remove the jamm med paper.
Close the Side door. After warm up, if same jam occ
curs, check the following.
2. Open the side & take away. Remove the jammed pa aper between the feed roller of the tray3 pick up unit
and tray2 feed roller. If there is any defective part in this area, replace it.
3. If the white idle roller of the take away door breaks away,
a release the inner cover and reassemble the idle
roller.
● Replacement part
7-6
69
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open the side & take away door. Remove the jamm med paper.
Close the Side door. After warm up, if same jam occ
curs, check the following.
4. Check if paper in the cassette are curled, replace the paper or stretch to remove curling.
5 Check
5. Ch k if th
the wallll connector
t off ttray3
3 pick
i k up unit
it iis co
onnected
t d properly.
l
Reconnect the connector.
6. If the problem persists, remove the pick up unit and check the following.
A. If the spring at the bottom of the pick up unit breakks away or is broken, replace the spring.
If the assembly mold part with spring is broken, re
eplace it.
B. If the compression
p spring
p g of the gguide-forward p pick
k upp breaks away,y, reassemble or replace
p it.
C. If the error message displays despite paper empty y in the cassette, check the empty actuator and photo
interrupt. Reassemble the empty actuator or replac ce the photo interrupter.
2. Replace
p the engine
g controller.
● Replacement part
7-7
70
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Tray No. LED is on.
- Tray 1 (2,3,4) is pulled out or the auto size sensor co
onnector is not connected or broken.
● Troubleshooting method :
2. If the cassette is not locked or pulled out without hollding the locking lever, reassemble the cassette.
3. Check if the auto size sensor is connected properly.. Reconnect or replace it.
● Replacement part
7-7
71
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
- 0604-001393 : PHOTO-INTERRUPTER
7-7
72
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Tray No. LED is on.
- Paper is empty in tray or the actuator empty is broken
n.
● Troubleshooting method :
● Replacement part
- 0604-001393 : PHOTO-INTERRUPTER
- JC92-02233A : SIDE JOINT
- JC92-02129A : PBA-ENGINE (CLX-9350ND)
- JC92-02239A : PBA-ENGINE (CLX-9250ND)
7-7
73
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
3 If th
3. the problem
bl persists,
i t turn
t the
th machine
hi off.
ff
Remove the SMPS box. (refer to 3.7.10)
And then replace the lift motor.
Lift Motorr
● Replacement part
7-7
74
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open the DCF take away door. Remove the jammed d paper.
Close the DCF take away door. After warm up, if same jam occurs, check the following.
3. Enter the diagnostic mode, and check the feed senssor test of the tray1 pick up unit.
If the paper is contacting sensor and “Without paper”” message is displayed, replace the sensor.
● Replacement part
7-7
75
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Paper transport jam (paper Input section)
- The paper has not reached the tray4 feed sensor with
hin normal time after pick up.
● Troubleshooting method :
1. Open the side & take away door. Remove the jamm med paper.
Close the Side door. After warm up,
p, if same jjam occ
curs,, check the following.
g
4. Check if paper in the cassette are curled, replace the paper or stretch to remove curling.
6. If the problem persists, remove the pick up unit and check the following.
A. If the spring at the bottom of the pick up unit breakks away or is broken, replace the spring.
If the assembly mold part with spring is broken, re
eplace it.
B. If the compression
p spring
p g of the gguide-forward p pick
k upp breaks away,y, reassemble or replace
p it.
C. If the error message displays despite paper empty y in the cassette, check the empty actuator and photo
interrupt. Reassemble the empty actuator or replac ce the photo interrupter.
2. Replace
p the engine
g controller.
● Replacement part
7-7
76
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-7
77
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
6. If the problem persists, remove the pick up unit and d check the following.
A. If the spring at the bottom of the pick up unit break
ks away or is broken, replace the spring.
If the assembly mold part with spring is broken, re
eplace it.
B. If the compression spring of the guide-forward pick up breaks away, reassemble or replace it.
C. If the error message displays despite paper empty y in the cassette, check the empty actuator and photo
interrupt. Reassemble the empty actuator or replace the photo interrupter.
● Replacement part
7-7
78
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Paper transport jam (paper Input section)
- The paper has not reached the tray2 feed sensor witthin normal time after pick up.
● Troubleshooting method :
1. Open the side & take away door. Remove the jamm med paper.
p, if same jjam occurs,, check the following.
Close the Side door. After warm up, g
6. If the problem persists, remove the pick up unit and check the following.
A. If the spring at the bottom of the pick up unit breakks away or is broken, replace the spring.
If the assembly mold part with spring is broken, re
eplace it.
B. If the compression
p spring
p g of the gguide-forward p pick upp breaks away,y, reassemble or replace
p it.
C. If the error message displays despite paper empty y in the cassette, check the empty actuator and photo
interrupt. Reassemble the empty actuator or replace the photo interrupter.
2. Replace
p the engine
g controller.
● Replacement part
7-7
79
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
6. Open the side door and remove the lower cover from m the rear of the side unit. Check if the connector of
the MP tray unit and the connector of the joint PBA are
e connected properly. Reconnect the connector.
7. If the problem persists, remove the MP unit from the e side unit and check the following.
A. If the spring at the bottom of the MP unit breaks aw way or is broken, replace the spring.
If the assembly mold part with spring is broken, re eplace it.
B. If the spring of the guide to fix the pick up roller in MP
M unit breaks away, reassemble or replace it.
C. If the error message displays despite paper empty y in the cassette, check the empty actuator and photo
interrupt. Reassemble the empty actuator or replac ce the photo interrupter.
D. If the driving gear breaks away or is broken, reass semble or replace it.
7-8
80
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open the side & take away door. Remove the jamm med paper.
Close the Side door. After warm up, if same jam occ
curs, check the following.
3. If the white idle roller of the take away door breaks away,
a
release the inner cover and reassemble the idle rolle er.
5. Enter the diagnostic mode, and check the feed senssor test of the tray1 pick up unit.
If the paper is contacting sensor and “Without paper”” message is displayed, replace the sensor.
● Replacement part
- 0604-001393 : PHOTO-INTERRUPTER
- JC92-02129A : PBA-ENGINE (CLX-9350ND)
- JC92-02239A : PBA-ENGINE (CLX-9250ND)
7-8
81
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open the side (take away) door. Remove the jamme ed paper.
Close the side (take away) door. After warm up, if sa
ame jam occurs, check the following.
3. Check if the idle roller on bottom of the side unit is fiixed correctly. If or not, disassemble the Guide and
reassemble the idle roller. .
2. Enter the diagnostic mode, and check the reflective sensor test.
If the paper is at sensor and “Without paper” messagge is displayed, replace the sensor.
3. Enter the diagnostic mode, and check the motor test of the pick up drive unit.
If the motor is broken,
broken replace itit.
● Replacement part
7-8
82
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Open the side (take away) door. Remove the jamme ed paper.
Close the side (take away) door. After warm up, if sa
ame jam occurs, check the following.
3. Check if the idle roller on bottom of the side unit is fiixed correctly. If or not, disassemble the Guide and
reassemble the idle roller.
2. Enter the diagnostic mode, and check the reflective sensor test.
If the paper is at sensor and “Without paper” messagge is displayed, replace the sensor.
3. Enter the diagnostic mode, and check the motor test of the pick up drive unit.
If the motor is broken, replace it.
● Replacement part
7-8
83
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Open
p the side door. Remove the jjammed p paper.
p
Close the side door. After warm up, if same jam occ
curs, check the following.
4 If the
4. th problem
bl persists,
i t separate
t the
th side
id unitit ffrom set.
s t And
A d check
h k the
th ffollowing.
ll i
7-8
84
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
5. Make the duplex 1 jam sensor be pushed by pushing duplex gate and pulling down the timing belt.
Close the side door.
Enter the diagnostic mode, and execute the duplex 1 jam sensor test.
Be the paper is at sensor. If “Without paper” messag
ge is displayed, replace the sensor or the actuator.
8. Enter the diagnostic mode, execute the duplex solen noid test.
If there is no operation sound, reconnect the solenoid connector or replace the solenoid.
8. If the solenoid works but paper folded jam occurs, check the return spring and link. Reassemble or
replace it. For this, you have to remove the Cover-P
PCB of the side unit.
10. Check if the Joint PBA connector is connected properly. If there is any problem, reconnect the
connector or replace the Joint PBA.
● Replacement part
7-8
85
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Make the duplex 2 jam sensor be pushed by pushing duplex gate and pulling down the timing belt.
Close the side door.
Enter the diagnostic mode, and execute the duplex 2 jam sensor test.
Be the paper at sensor. If “Without paper” message is displayed, replace the sensor or the actuator.
5 Ch
5. Check k if th
the JJoint
i t PBA connector
t iis connected
t d properly.
l If there
th iis any problem,
bl reconnectt th
the connector
t
or replace the Joint PBA.
● Replacement part
- JC92-02233A
JC92 02233A : SIDE JOINT
7-8
86
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
2. If there is any obstacles between the duplex feed roller and the regi roller, remove it.
5. Enter the diagnostic mode, and execute the pick up drive motor test.
If the motor is not working, replace it.
● Replacement part
7-8
87
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
5. Close the side door. Enter the diagnostic mode, exeecute the exit solenoid on/off of the actuator test.
If there is no operation sound, reconnect or replace the
t solenoid connector.
7-8
88
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
7. If the problem persists, disassemble the exit unit and d check the following.
If any part is damaged, replace it.
A. Check if the gate return is damaged or deformed.
B. Check if the idle roller, holder in the exit unit is dam
maged.
C. Check if the actuator exit sensor is damaged.
D. Check if the photo interrupter is damaged or the co onnector is connected properly.
● Replacement part
- JC92-02233A : SIDE JOINT
7-8
89
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Remove the exit unit from the set. And replace the face
f down antistatic brush.
2. Enter the diagnostic mode, and execute the face down bin full sensor test.
When lifting the bin full actuator, if “without paper” is
s displayed, replace the photo interrupter or
reconnect the connector.
3. If the photo interrupter is broken away from the exit unit, remove the exit unit and reassemble the photo
interrupter.
● Replacement part
7-9
90
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Too much paper in output bin tray (paper out put sectiion)
- The bin full sensor actuator or sensor is defective.
● Troubleshooting method :
2. Enter the diagnostic mode, and execute the face up bin full sensor test.
When lifting the bin full actuator, if “without paper” is
s displayed, replace the photo interrupter or
reconnect the connector.
● Replacement part
7-9
91
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
The system has some problems due to CPU overheatting.
The CPU fan is not working.
● Troubleshooting method :
● Replacement part
- JC98-01050A : BOARD-CPU_COOLER
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
7-9
92
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC59-00031A : HDD
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
7-9
93
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Set up the time and reboot the MFP. Is the setting time stored?
Yes : Status is normal.
● Replacement part
- 4301-001042 : BATTERY-LI
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A
JC92 02235A : PBA-MAIN
PBA MAIN (CLX-9250ND)
(CLX 9250ND)
7-9
94
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC92-02150A
JC92 02150A : PBA-MAIN
PBA MAIN (CLX-9350ND)
(CLX 9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
7-9
95
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC59-00031A : HDD
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
7-9
96
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-9
97
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
- JC59-00031A
JC59 00031A : HDD
7-9
98
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
- JC59-00031A : HDD
7-9
99
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
- JC59-00031A : HDD
7-100
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
3 If th
3. the problem
bl persists,
i t replace
l th
the Vid
Video b
board.
d
● Replacement part
7-101
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-102
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Video System is not responding over 3 minutes.
● Troubleshooting method :
1. Turn device off then change the USB cable between UI board and Video System.
2 T
2. Turn
rn it on again
again.
5. Turn it on again.
g
● Replacement part
- JC59-00031A : HDD
7-103
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-104
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
4. Select the following menu . ( My Computer Hardw ware Device Manager Universal Serial Bus
Controller ) Can you see “USB Printing Support” ?
Yes :
A. Check the ‘USB Printing support’ .
B. When the cable is unplugged,
p gg USB pprintingg support
pp disappears?
pp
When the cable is reconnected, USB printting support appears?
No :
A. Can you see : Universal Host controller / Open
O host controller / Enhanced Host controller?
B. Check the operation for another USB devic ce.
C. Check that USB in BIOS menu is enabled.
5 Ch
5. Checkk if th
the OS ddriver
i iis iinstalled
t ll d correctly.
tl
Yes : Re-install the latest driver after checking the firmware
f version.
No : Install the latest driver.
7 IIs using
7. i ththe USB extension
t i cable
bl or 5M cable?
bl ?
Yes : Connect the 2M cable to PC and Printer.
7-105
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Replacement part
7-106
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Communication error has occurred.
● Troubleshooting method :
● Replacement
p part
p
7-107
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
4. Check the connection between primary modem carrd and Video board.
Remove the primary modem card and re-install it.
5. Replace
p the p
primary
y modem card.
● Replacement part
7-108
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
The MFP could not detect the secondary fax modem.
● Troubleshooting method :
[ FCON card ]
● Replacement part
- JC92-02250A : PBA-SECOND FAX CARD
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
- JC92-02148A : PBA-DUAL FAX CONTROL(FCON card)
c
7-109
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
[ FD I Dev
vice ]
6. If the p
problem p
persists,, replace
p the Video board.
● Replacement part
7-110
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
[ FCON card ]
● Replacement part
- JC92-02250A : PBA-SECOND FAX CARD
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
- JC92-02148A
JC92 02148A : PBA-DUAL
PBA DUAL FAX CONTROL(FCON card)
c d)
7-111
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Engine board
● Replacement part
7-112
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Engine board
● Replacement part
7-113
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
At booting,
g the PPM p
port information from engine
g boarrd is different from it in Flash.
● Troubleshooting method :
Engine board
● Replacement
p part
p
7-114
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
Engine board
● Replacement part
7-115
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
FFC Cable
● Replacement part
7-116
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Engine board
● Replacement part
7-117
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
1. Open and close the front door. Wait until warming up is done.
● Replacement part
7-118
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC92-02129A : PBA-ENGINE
7-119
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC92-02129A : PBA-ENGINE
7-120
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
JC92-02170A : PBA-SCAN
7-121
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
2. Check if the scanner is working properly when the cover open sensor lever is on/off.
In case of normal status, when you push the cover open
o sensor, it moves to the left ( home
position direction). When you take off the cover ope
en sensor, it moves to the right (paper
detection position direction).
7-122
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
DADF board
Scanner board
● Replacement part
- JC92-02170A : PBA-SCAN
- JC92-02165A : PBA-ADF
7-123
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
[ FCON card ]
5 R
5. Replace
l th
the FCON card.
d
● Replacement part
7-124
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-125
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-126
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
4. If the problem persists after replacing the fuser unit, replace the engine board or fuser control
board or SMPS.
● Replacement part
7-127
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
2. When you open and close the side door, check if there is a sound of the fuser pressure motor.
● Replacement part
7-128
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
1. Turn the machine off and turn it on again.
4. If the problem persists after replacing the fuser unit, replace the engine board or fuser control
board or SMPS.
● Replacement part
7-129
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
y / Cause :
4. If the problem persists after replacing the fuser unit,, replace the engine board or fuser control
board or SMPS.
● Replacement part
7-130
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
4. If the problem persists after replacing the fuser unit, replace the engine board or SMPS.
● Replacement part
7-131
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-132
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
Caution
Never overpower and remove the LD PBA.
Never remove the LSU cover
cover.
● Replacement part
7-133
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-134
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Caution
Never overpower and remove the LD PBA.
Never remove the LSU cover
cover.
● Replacement part
7-135
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-136
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom / Cause :
● Troubleshooting method :
● Replacement part
7-137
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
During a DADF job, the document doesn’t reach the simplex regi sensor in normal time.
● Troubleshooting method :
● Replacement
7-138
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
During a DADF job, the document doesn’t reach the scan read sensor in normal time.
● Troubleshooting method :
● Replacement part
7-139
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-140
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
During a DADF job, the document doesn’t reach the scan sensor in normal time after duplex scan.
● Troubleshooting method :
● Replacement part
7-141
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
3. If there is a document in the Exit turn section, open the Cover-Exit tray and remove the jammed
document.
● Replacement part
7-142
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
7-143
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
● Replacement part
- JC92-02165A
JC92 02165A : PBA-ADF
PBA ADF
7-144
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Troubleshooting method :
4. Check if there is any contaminated lamination on surface of pick-up / ADF / Retard roller.
Clean or replace the roller.
● Replacement part
7-145
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-146
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-147
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-148
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting procedure
7-149
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-150
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting procedure
7-151
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7-152
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
Step Section Check item
m Result Action
1 Imaging unit HV terminal of imaging unit is dirty. Yes Clean the terminal.
2 Dirty on the outside due
e to scattered Yes Replace imaging unit with
toner new one
3 Oi i l
Original O i i l iis d
Original damaged
d or dirty.
di t Y
Yes Ch
Change original.
i i l
4 DADF DADF does not lie flat. Yes Change DADF if it is
deformed or hinges are
broken.
5 Original glass Original glass is dirty. Yes Wipe the surface clean
with a soft cloth.
6 Sh di sheet
Shading h t Sh di sheet
Shading h t Glass
Gl is dirty.
is di t Y
Yes Wipe th
Wi the surface
f clean
l
Glass with a soft cloth
7 Mirror, lens, Mirror is dirty. Yes Clean.
exposure lamp,
8 and reflectors Lens is dirty. Yes Clean.
9 Exposure lamp is dirty. Yes Clean.
10 Reflectors are dirty
dirty. Yes Clean
Clean.
11 Basic screen The problem is eliminatted when the No Try another exposure
quality/ density image is produced in th
he manual level in manual.
exposure setting.
12 The problem has been eliminated No Scan the Chart and check
through the checks of steps
s up to 10. the image quality again
7-153
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7-154
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7-156
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Paper feeding
direction
B. Troubleshooting procedure
4 Main Drive Unit After replacing the E-Clutcch in main Yes Replace the Main Drive
drive unit, 0.78mm or 1.1m mm unit.
periodic jitter has occurred
d.
5 Laser 0.508mm or 0.65mm perio
odic jitter Yes Replace the Laser
Scanning Unit has occurred. Scanning Unit (LSU).
6 Regi roll Gear 2.5mm periodic jitter has occurred.
o Yes Replace the Regi Roll
Gear in main unit.
7 Imaging
g g unit 94mm periodic jjitter has occurred.
o Yes Replace the imaging
g g unit.
8 Main Drive Unit After replacing the imaging unit, 94 Yes Replace the Main Drive
mm periodic jitter or band has unit.
occurred.
9 Imaging unit 35mm or 62mm or 43mm periodic Yes Replace the imaging unit.
d.
jitter or band has occurred
10 Main Drive Unit After replacing the imaging unit, 35 Yes Replace the Main Drive
mm periodic jitter or band has unit.
occurred.
11 Transfer belt 52mm periodic band has occurred.
o Yes Replace the Transfer Belt
unit unit.
12 Transfer 2 55~56mm periodic band has
h Yes Replace the T2 roller.
roller occurred
occurred.
7-157
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting
g procedure
p
7-158
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7-159
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-160
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Y S600 Pattern
7-161
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
M S600 Pattern
7-162
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
C S600 Pattern
7-163
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
K S600 Pattern
7-164
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
TRC Report
7-165
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting procedure
7-167
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7-168
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7-169
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting procedure
7-171
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
A. Typical
yp faulty
y images
g
B. Troubleshooting procedure
7 Transfer roller Transfer roller is dirty or Yes Change 2nd image transfer
unit scratched. roller unit.
7-172
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting procedure
7-173
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting
g procedure
p
7-174
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
B. Troubleshooting procedure
Defaultt (Level 5)
7-175
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-176
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-177
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
5. Compare the condition of the printout with the DADDF test chart.
For example, the length of scale marks in the circles is equivalent (acceptable range by less or more than
0.5 mm), it means the DADF was installed well.
7-178
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Otherwise, adjust the DADF using the screw at the backside and handle hinge as shown by the examples
e is 1mm shorter than that of right side, move the
below. For example, the length of scale on the left side
steel plate toward the rear side by two scale marks using the screw at the backside and handle hinge. A
scale mark is approximately 0.5 mm.
7-179
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
7-180
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
● Troubleshooting method :
7-181
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
1. OPE is defective.
● Troubleshooting method :
7-182
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
● Troubleshooting method :
7-183
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
1. Keyboard is defective.
2. OPE is defective.
3. HUB PBA is not supplied with power.
● Troubleshooting method :
● Symptom
● Troubleshooting method :
7-184
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
● Symptom
● Troubleshooting method :
● Symptom
● Troubleshooting method :
7-185
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
8-1
8. System
Diagram
g
CLX-9250/9350 series
Service Manual
y FINISHER
MAIN PBA
DC
CF
MAIN
N PBA
8. System
m Diagram
8.2 ENGINE 2
DRIVE JOINT
PBA
JC39-01106A
CN13 CN12
DRIVE POWER DRIVE POWER
nDETECT_OPC_CLEAN4 23 24 nDETECT_OPC_CLEAN4
- 24 23 -
nDETECT_OPC_CLEAN2 21 22 nDETECT_OPC_CLEAN2
nDETECT_OPC_CLEAN3 22 21 nDETECT_OPC_CLEAN3
DIR_BLDC_ITB 19 20 DIR_BLDC_ITB
nDETECT OPC CLEAN1
nDETECT_OPC_CLEAN1 20 19 nDETECT OPC CLEAN1
nDETECT_OPC_CLEAN1
CLK_ITB_CLEAN_MOT 17 18 CLK_ITB_CLEAN_MOT
MODE_ITB_CLEAN_MOT 18 17 MODE_ITB_CLEAN_MOT
DIR_ITB_CLEAN_MOT 15 16 DIR_ITB_CLEAN_MOT
nEN_ITB_CLEAN_MOT 16 15 nEN_ITB_CLEAN_MOT
DGND 13 14 DGND
DGND 14 13 DGND
DGND 11 12 DGND
DGND 12 11 DGND
DGND 9 10 DGND
DGND 10 9 DGND
24V1_L 7 8 24V1_L
DGND 8 7 DGND
24V1_L 5 6 24V1_L
24V1_L 6 5 24V1_L
24V3_L1 3 4 24V3
24V1_L 4 3 24V1_L
3.3V 1 2 3.3V
5V4_L 2 1 5V
JC39-01158A
SMPS CN26
SCAN I/F
CN26
SCAN I/F
5V5_L2 1 18 1 18 5V5_L2
5V5_L2 2 17 2 17 5V5_L2
5V5_L2 3 16 3 16 5V5_L2
24V4_L1 4 15 4 15 24V4
24V4_L1 5 14 5 14 24V4
24V4_L1 6 13 6 13 24V4
24V4_L1 7 12 7 12 24V4
5VE_L 8 11 8 11 5VE
nADF_PAPER_DETECT 9 10 Wall 9 10 nADF_PAPER_DETECT
JC39-01094A 9 CON 10 9 nADF_COVER_OPEN
nADF_COVER_OPEN 10
EN_EXIT_LED 11 8 11 8 EN_EXIT_LED
CN7
DGND 12 7 12 7 DGND
SMPS I/F
DGND 13 6 13 6 DGND
DGND 10 1 DGND DGND 14 5 14 5 DGND
SMPS_TEMP 9 2 ON_POWER_RELAY DGND 15 4 15 4 DGND
ON_FUSER_MAIN1 8 3 ON_FUSER_MAIN1 DGND 16 3 16 3 DGND
ON_FUSER_MAIN2 7 4 ON_FUSER_MAIN2 DGND 17 2 17 2 DGND
FUSER_24V 6 5 FUSER_24V DGND 18 1 18 1 DGND
Primary
nDETECT_FAN_SMPS_OUT 5 6 nDETECT_FAN_SMPS_OUT
OUT_SMPS_FAN2 4 7 OUT_SMPS_FAN2 JC39-01096A
ON_FUSER_RELAY 3 8 ON_FUSER_RELAY
DGND 2 9 DGND
CN20 CN1
ZC 1 10 ZC
LSU YM LSU YM
DGND 8 11 DGND
DGND 7 12 DGND nSH_LSU1_1B 1 16 nSH_LSU1_1B
POWER_CON6 6 13 EN_5V DGND 2 15 DGND
Secondary EN_5V 5 14 RS_5V nVDO1_1B_N 3 14 nVDO1_1B_N
RS_5V 4 15 EN_24V nVDO1_1B_P 4 13 nVDO1_1B_P
EN_24V 3 16 nDETECT_FAN_SMPS_IN DGND 5 12 DGND
nDETECT_FAN_SMPS_IN 2 17 OUT_SMPS_FAN1 nVDO1_2B_N 6 11 nVDO1_2B_N
OUT_SMPS_FAN1 1 18 EN_VIDEO nVDO1_2B_P 7 10 nVDO1_2B_P
19 POWER_CON8 DGND 8 9 DGND
20 POWER_CON6 nSH_LSU1_2B 9 8 nSH_LSU1_2B LSU JOINT
ENGINE PB
BA 5V4_R
DGND
nHSYNC1_N
nHSYNC1_P
10
11
12
13
7
6
5
4
5V4_R
DGND
nHSYNC1_N
nHSYNC1_P
PBA
DGND 14 3 DGND
nLDON_LSU1 15 2 nLDON_LSU1
LSU_LD1_POWER 16 1 LSU_LD1_POWER
nSH_LSU2_2B 17 32 nSH_LSU2_2B
DGND 18 31 DGND
JC39-01103A nVOD2_2B_N 19 30 nVOD2_2B_N
HVPS 1 CN22
HVPS I/F(½)
nVOD2_2B_P
DGND
nVOD2_1B_N
20
21
22
29
28
27
nVOD2_2B_P
DGND
nVOD2_1B_N
DGND 14 1 DGND nVOD2_1B_P 23 26 nVOD2_1B_P
DGND 13 2 DGND DGND 24 25 DGND
DGND 12 3 DGND nSH_LSU2_1B 25 24 nSH_LSU2_1B
DGND 11 4 DGND 5V4 R
5V4_R 26 23 5V4 R
5V4_R
DGND 10 5 DGND DGND 27 22 DGND
5V4_R 9 6 5V4_R nHSYNC2_N 28 21 nHSYNC2_N
24V3 8 7 24V3 nHSYNC2_P 29 20 nHSYNC2_P
24V2_HVPS 7 8 24V2_HVPS DGND 30 19 DGND
24V2_HVPS 6 9 24V2_HVPS nLDON_LSU2 31 18 nLDON_LSU2
24V2_HVPS 5 10 24V2_HVPS LSU_LD2_POWER 32 17 LSU_LD2_POWER
THV_P 4 11 THV_P
nEN_THV 3 12 nEN_THV JC39-01096A
PWM_THV 2 13 PWM_THV
CORONA 1 14 CORONA CN19 CN2
PWM_SAW 14 15 PWM_SAW LSU CK LSU CK
PWM_FUSER_BIAS 13 16 PWM_FUSER_BIAS 5VE 1 17 5VE
PWM_MHV_GRID4 12 17 PWM_MHV_GRID4 nSH_LSU3_1B 2 16 nSH_LSU3_1B
PWM_MHV_GRID3 11 18 PWM_MHV_GRID3 DGND 3 15 DGND
PWM_MHV_GRID2 10 19 PWM_MHV_GRID2 nVDO3_1B_N 4 14 nVDO3_1B_N
PWM_MHV_GRID1 9 20 PWM_MHV_GRID1 nVDO3_1B_P 5 13 nVDO3_1B_P
PWM_MHV_CORONA4 8 21 PWM_MHV_CORONA4 DGND 6 12 DGND
PWM_MHV_CORONA3 7 22 PWM_MHV_CORONA3 nVDO3_2B_N 7 11 nVDO3_2B_N
PWM_MHV_CORONA2 6 23 PWM_MHV_CORONA2 nVDO3_2B_P 8 10 nVDO3_2B_P
PWM_MHV_CORONA1 5 24 PWM_MHV_CORONA1 DGND 9 9 DGND
PWM_FAN_OZONE_SUCTION 4 25 PWM_FAN_OZONE_SUCTION nSH_LSU3_2B 10 8 nSH_LSU3_2B
nDETECT_FAN_OZONE_SUCTION 3 26 nDETECT_FAN_OZONE_SUCTION 5V4_R 11 7 5V4_R
(NC) 2 27 (NC) DGND 12 6 DGND
(NC) 1 28 (NC) nHSYNC3_N 13 5 nHSYNC3_N
nHSYNC3_P 14 4 nHSYNC3_P
DGND 15 3 DGND
CN3 nLDON_LSU3 16 2 nLDON_LSU3
LSU_LD3_POWER 17 1 LSU_LD3_POWER
- 18 34 -
1 PWM_FAN_OZONE nSH_LSU4_2B 19 33 nSH_LSU4_2B
2 nDETECT_FAN_OZONE DGND 20 32 DGND
3 GND nVDO4_2B_N 21 31 nVDO4_2B_N
nVDO4_2B_P 22 30 nVDO4_2B_P
DGND 23 29 DGND
nVDO4_1B_N 24 28 nVDO4_1B_N
nVDO4_1B_P 25 27 nVDO4_1B_P
JC39-01104A
HVPS 2 CN30
HVPS I/F(2/2)
DGND
nSH_LSU4_1B
5V4_R
26
27
28
26
25
24
DGND
nSH_LSU4_1B
5V4_R
DGND 29 23 DGND
PWM_AC_VPP1 17 1 PWM_AC_VPP1 nHSYNC4_N 30 22 nHSYNC4_N
DGND 16 2 DGND nHSYNC4_P 31 21 nHSYNC4_P
DGND 15 3 DGND DGND 32 20 DGND
DGND 14 4 DGND nLDON_LSU4 33 19 nLDON_LSU4
DGND 13 5 DGND LSU_LD4_POWER 34 18 LSU_LD4_POWER
5V4_R 12 6 5V4_R
24V2_HVPS 11 7 24V2_HVPS
24V2_HVPS 10 8 24V2_HVPS JC39-01096A
24V2_HVPS 9 9 24V2_HVPS
ITHV4 8 10 ITHV4 CN28 CN28
ITHV3 7 11 ITHV3 LSU IF LSU IF
ITHV2 6 12 ITHV2
ITHV1 5 13 ITHV1 DIR_LSU_SKEW_MOT1 1 20 DIR_LSU_SKEW_MOT1
nEN_THV_CLEAN_N 4 14 nEN_THV_CLEAN_N nEN_LSU_SKEW_MOT1 2 19 nEN_LSU_SKEW_MOT1
nEN_THV_CLEAN_P 3 15 nEN_THV_CLEAN_P CLK_LSU_SKEW_MOT1 3 18 CLK_LSU_SKEW_MOT1
PWM_ITHV4 2 16 PWM_ITHV4 DIR_LSU_SKEW_MOT2 4 17 DIR_LSU_SKEW_MOT2
PWM_ITHV3 1 17 PWM_ITHV3 nEN_LSU_SKEW_MOT2 5 16 nEN_LSU_SKEW_MOT2
PWM_ITHV2 34 18 PWM_ITHV2 CLK_LSU_SKEW_MOT2 6 15 CLK_LSU_SKEW_MOT2
PWM_ITHV1 33 19 PWM_ITHV1 DIR_LSU_SKEW_MOT3 7 14 DIR_LSU_SKEW_MOT3
nEN_AC4 32 20 nEN_AC4 nEN_LSU_SKEW_MOT3 8 13 nEN_LSU_SKEW_MOT3
nEN_AC3 31 21 nEN_AC3 CLK_LSU_SKEW_MOT3 9 12 CLK_LSU_SKEW_MOT3
nEN_AC2 30 22 nEN_AC2 DIR_LSU_SHUTTER_MOT 10 11 DIR_LSU_SHUTTER_MOT
nEN_AC1 29 23 nEN_AC1 nEN_LSU_SHUTTER_MOT 11 10 nEN_LSU_SHUTTER_MOT
PWM_DEV_DC4 28 24 PWM_DEV_DC4 CLK_LSU_SHUTTER_MOT 12 9 CLK_LSU_SHUTTER_MOT
PWM_DEV_DC3 27 25 PWM_DEV_DC3 nEN_WASTE_MOT 13 8 nEN_WASTE_MOT
PWM_DEV_DC2 26 26 PWM_DEV_DC2 CLK_WASTE_MOT 14 7 CLK_WASTE_MOT
PWM_DEV_DC1 25 27 PWM_DEV_DC1 nSS_LSU_MOT1 15 6 nSS_LSU_MOT1
PWM_AC4 24 28 PWM_AC4 nRDY_LSU_MOT1 16 5 nRDY_LSU_MOT1
PWM_AC3 23 29 PWM_AC3 CLOCK_LSU_MOT1 17 4 CLOCK_LSU_MOT1
PWM_AC2 22 30 PWM_AC2 nSS_LSU_MOT2 18 3 nSS_LSU_MOT2
PWM_AC1 21 31 PWM_AC1 nRDY_LSU_MOT2 19 2 nRDY_LSU_MOT2
PWM_AC_VPP4 20 32 PWM_AC_VPP4 CLOCK_LSU_MOT2 20 1 CLOCK_LSU_MOT2
PWM_AC_VPP3 19 33 PWM_AC_VPP3 24V3_L1 21 40 24V3_L1
PWM_AC_VPP2 18 34 PWM_AC_VPP2 24V3_L1 22 39 24V3_L1
24V5 L
24V5_L 23 38 24V5 L
24V5_L
5V4_L1 24 37 5V4_L1
24V3 25 36 24V3
DGND 26 35 DGND
JC39-01105A DGND 27 34 DGND
DGND 28 33 DGND
CN1 CN11 nDETECT_LSU_SHUTTER1 29 32 nDETECT_LSU_SHUTTER1
CASSETTE JOINT CASSETTE JOINT LSU_TEMP 30 31 LSU_TEMP
EN_PICKUP_CLUTCH2 15 1 EN_PICKUP_CLUTCH2 nWASTE_INSTALL 31 30 nWASTE_INSTALL_AVR
EN_PICKUP_CLUTCH1 14 2 EN_PICKUP_CLUTCH1 nCOVER_OPEN_FRONT 32 29 FRONT_COVER_OPEN
A_CASSETTE_DC1 13 3 A_CASSETTE_DC1 WASTE_LEVEL 33 28 WASTE_LEVEL
nA_CASSETTE_DC1 12 4 nA_CASSETTE_DC1 EN_WASTE_LED 34 27 EN_WASTE_LED
A_CASSETTE_DC2 11 5 A_CASSETTE_DC2 DIR_WASTE_MOT 35 26 DIR_WASTE_MOT
nA_CASSETTE_DC2 10 6 nA_CASSETTE_DC2 PWM_FAN_LSU1 36 25 PWM_FAN_LSU1
nPAPER_LIFT2 9 7 nPAPER_LIFT2 nDETECT_FAN_LSU1 37 24 nDETECT_FAN_LSU1
nPAPER_FEED2 8 8 nPAPER_FEED2 PWM_FAN_LSU2 38 23 PWM_FAN_LSU2
nPAPER_EMPTY2 7 9 nPAPER_EMPTY2 nDETECT_FAN_LSU2 39 22 nDETECT_FAN_LSU2
nPAPER_LIFT1 6 10 nPAPER_LIFT1 DGND 40 21 DGND
nPAPER_FEED1 5 11 nPAPER_FEED1
nPAPER_EMPTY1 4 12 nPAPER_EMPTY1
3_3V 3 13 3_3V
5V4_L1 2 14 5V4_L1
24V3 1 15 24V3
PAPER_SIZE2 30 16 PAPER_SIZE2
nDETECT_PAPER_SIZE2 29 17 nDETECT_PAPER_SIZE2 JC39-01074A
nCOVER_OPEN_FEED 28 18 nCOVER_OPEN_FEED
CN15 CN8
PAPER_SIZE1 27 19 PAPER_SIZE1
nDETECT_PAPER_SIZE1 nDETECT_PAPER_SIZE1 BOTTLE JOINT BOTTLE JOINT
26 20
nPAPER_CASSETTE2_LEVEL2 25 21 nPAPER_CASSETTE2_LEVEL2 PWM_FAN_DUPLEX1 1 18 PWM_FAN_DUPLEX1
nPAPER_CASSETTE2_LEVEL1
nPAPER_CASSETTE1_LEVEL2
24
23
22
23
nPAPER_CASSETTE2_LEVEL1
nPAPER_CASSETTE1_LEVEL2
PWM_FAN_FUSER_OUT
PWM_FAN_TONER_SUCTION
2
3
17
16
PWM_FAN_FUSER_OUT
PWM_FAN_TONER_SUCTION BOTTLE
nPAPER_CASSETTE1_LEVEL1 22 24 nPAPER_CASSETTE1_LEVEL1 nDETECT_FAN_DUPLEX1 4 15 nDETECT_FAN_DUPLEX1
DGND
DGND
21
20
25
26
DGND
DGND
nDETECT_FAN_FUSER_OUT
nDETECT_FAN_TONER_SUCTION
5
6
14
13
nDETECT_FAN_FUSER_OUT
nDETECT_FAN_TONER_SUCTION
JOINT PBA
OUT_TEMP 19 27 OUT_TEMP DIR_EXIT2_MOT 7 12 DIR_EXIT2_MOT
DGND 18 28 DGND nEN_EXIT2_MOT 8 11 nEN_EXIT2_MOT
OUT_HUMI 17 29 OUT_HUMI CLK_EXIT2_MOT 9 10 CLK_EXIT2_MOT
5V2 L1
5V2_L1 16 30 5V4 L2
5V4_L2 MODE EXIT2 MOT
MODE_EXIT2_MOT 10 9 MODE EXIT2 MOT
MODE_EXIT2_MOT
PWM_TONER_DC1 11 8 nEN_TONER_DC1
PWM_TONER_DC2 12 7 nEN_TONER_DC2
PWM_TONER_DC3 13 6 nEN_TONER_DC3
4 PWM_TONER_DC4 14 5 nEN_TONER_DC4
3 TONER_COUNT1 15 4 TONER_COUNT1
LSU SKEW MOTOR Y
2 TONER_COUNT2 16 3 TONER_COUNT2
1 TONER_COUNT3 17 2 TONER_COUNT3
TONER_COUNT4 18 1 TONER_COUNT4
SDA_CRUM_BOTTLE 19 36 SDA_CRUM_BOTTLE
SCL_CRUM_BOTTLE 20 35 SCL_CRUM_BOTTLE
CLK_BLDC_FUSER 21 34 CLK_BLDC_FUSER
nREADY_BLDC_FUSER 22 33 nREADY_BLDC_FUSER
EN_BLDC_FUSER 23 32 EN_BLDC_FUSER
JC39-01073A GAIN_BLDC_FUSER 24 31 GAIN_BLDC_FUSER
EN_EXIT_CLUTCH 25 30 EN_EXIT_CLUTCH
CN10 3_3V_CRUM 26 29 3_3V_CRUM
SIDE DRAWER 5V4_L1 27 28 5V4_L1
24V2_L 14 1 24V2_L 24V3 28 27 24V2_L
24V2_L 13 2 24V2_L 24V3 29 26 24V2_L
5V4_L1 12 3 5V4_L1 24V3 30 25 24V3
EN_MP_CLUTCH 11 4 EN_MP_CLUTCH 24V3 31 24 24V3
EN_MP_SOL 10 5 EN_MP_SOL DIR_TONER_DC 32 23 DIR_TONER_DC
EN_DUPLEX_CLUTCH 9 6 EN_DUPLEX_CLUTCH DGND 33 22 DGND
EN_DUPLEX_SOL 8 7 PWM_DUPLEX_SOL DGND 34 21 DGND
EN_FACEUP_SOL 7 8 PWM_FACEUP_SOL DGND 35 20 DGND
nCOVER_OPEN_SIDE 6 9 nCOVER_OPEN_SIDE DGND 36 19 DGND
nPAPER_FUSER_OUT 5 10 nPAPER_FUSER_OUT
A_T2_DC 4 11 24V2_L JC39-01101A
nA_T2_DC 3 12 nA_T2_DC
3_3V 2 13 3_3V
CN6
MP_SIZE 1 DRAWER 14 MP_SIZE OPE POWER
24V4 1
DGND 14 CONNECTOR 15 DGND
5V3 2
nPAPER_MP_SIZE 13 16 nPAPER_MP_SIZE
5V3 3
nPAPER_JAM_DUPLEX1 12 17 nPAPER_JAM_DUPLEX1
nPAPER_JAM_DUPLEX2 11 18 nPAPER_JAM_DUPLEX2 5V3 4 CN1
5V3 5 MAIN_PWR
nDETECT_FACEUP 10 19 nDETECT_FACEUP
5V3 6
nBIN FULL FACEUP
nBIN_FULL_FACEUP 9 20 nBIN FULL FACEUP
nBIN_FULL_FACEUP
5V3 7
nPAPER_MP_EMPTY 8 21 nPAPER_MP_EMPTY 11 24V4
5VE_L 8
nPAPER_CURL1 7 22 nPAPER_CURL1 10 DGND
nPAPER_CURL2 nPAPER_CURL2 5VE_L 9
6 23 9 5V3_L1
nPAPER_FUSER_IN 5 24 nPAPER_FUSER_IN 5VE_L 10
8 DGND
nPAPER_JAM_FACEUP 4 25 nPAPER_JAM_FACEUP DGND 11
7 5V3_L1
nDETECT_T2_POS1 3 26 nDETECT_T2_POS1 DGND 12
6 DGND
DGND 2 27 DGND DGND 13
5 5VE
DGND 1 28 DGND DGND 14
4 DGND
DGND 15
3 5VE
DGND 16
2 DGND
nSOFT_BUTTON 17
1 nSOFT_BUTTON
RS_5V 18 3
CASSETTE_1_LED_RED 19 2 CASSETTE LED
CASSETTE_2_LED_RED 20 1
nCOVER_OPEN_FRONT 21
DGND 22
8-2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Downloaded from www.Manualslib.com manuals search engine
8. System
m Diagram
SCAN PBA
MAIN PBA
JC39-00001A
CN21
OPE I/F
CN11
1 PPC_WAKEUP_OPE SPEAKER
SPEAKER
2 DM_OPE
3 DP_OPE
4 DGND SPEAKER_P 1
5 FGND SPEAKER_N 2
6 FGND
JC39-01230A
CN24 CN7
VIDEO I/F(1) ENGINE I/F(1)
DGND 30 1 GND
nVDI4_2B_N 29 2 nVDO3_2B_N
nVDI4_2B_P 28 3 nVDO3_2B_P
DGND 27 4 GND
nVDI3_2B_P 26 5 nVDO2_2B_P
VDO2 2B P CN3 CN5 CN18
nVDI3_2B_N 25 6 nVDO2_2B_N MSOK I/F EXPANSION I/F USB DEVICE
DGND 24 7 GND
1 GND A1 GND
nVDI2_2B_N 23 8 nVDO1_2B_N VBUS 1
2 GND A2 PEX_ERIP_TX_P
nVDI2_2B_P 22 9 nVDO1_2B_P DM_DEVICE 2
3 PPC_LA(1) A3 PEX_ERIP_TX_N
DGND 21 10 GND DP_DEVICE 3
4 GND A4 GND
nVDI1_2B_P 20 11 nVDO0_2B_P DGND 4
5 PPC_LA(2) A5 GND
nVDI1_2B_N 19 12 nVDO0_2B_N FGND 5
6 PPC_LD(16) A6 PEX_ERIP_CLK_P
DGND 18 13 GND FGND 6
7 PPC_LA(2) A7 PEX_ERIP_CLK_N
nVDI4_1B_N 17 14 nVDO3_1B_N
8 PPC_LD(17) A8 GND
nVDI4_1B_P 16 15 nVDO3_1B_P
9 PPC_LA(3) A9 GND
DGND 15 16 GND
17 nVDO2_1B_P 10 PPC_LD(18) A10 PEX_ICON_RX_P
nVDI3_1B_P 14 CN9
18 nVDO2_1B_N 11 PPC_LA(5) A11 PEX_ICON_RX_N
nVDI3_1B_N 13 USB HOST
19 GND 12 PPC_LD(19) A12 GND
DGND 12
20 nVDO1_1B_N 13 PPC_LA(6) A13 GND
nVDI2_1B_N 11 VBUS 1
21 nVDO1_1B_P 14 PPC_LD(20) A14 GND
nVDI2_1B_P 10 DM_EXT_HOST 2
22 GND 15 PPC_LA(7) A15 PEX_FCON_RX_P
DGND 9 DP_EXT_HOST 3
23 nVDO0_1B_P 16 PPC_LD(21) A16 PEX_FCON_RX_N
nVDI1_1B_P 8 DGND 4
24 nVDO0_1B_N 17 PPC_LA(8) A17 GND
nVDI1_1B_N 7 FGND 5
6 25 GND 18 PPC_LD(22) A18 GND
DGND FGND 6
5 26 ENG_nPSYNC3 19 GND A19 PEX_FCON_CLK_P
nPSYNC4
4 27 ENG_nPSYNC2 20 PPC_LD(23) A20 PEX_FCON_CLK_N
nPSYNC3
nPSYNC2 3 28 ENG_nPSYNC1 21 PPC_LA(9) A21 GND
nPSYNC1 2 29 ENG_nPSYNC0 22 GND A22 nRST_PEX
DGND 1 30 GND 23 PPC_LA(10) A23 ICON_EN_PWR
24 PPC_LD(24) A24 PPC_nRST_FCON
25 PPC_LA(11) A25 GND
JC39-01230A 26 PPC_LD(25) A26 3.3V
ENGINE PBA CN31 CN6
27 PPC_LA(12) A27 3.3V
28 PPC_LD(26) A28 3.3V
VIDEO I/F(2) ENGINE I/F(2) CN24
29 PPC LA(13)
PPC_LA(13) A29 3 3V
3.3V
DGND 30 1 GND FDI I/F
30 PPC_LD(27) A30 SPEAKER_P
nLSYNC4 29 2 ENG_nHSYNC3 31 PPC_LA(14) A31 SPEAKER_N
nLSYNC3 28 3 ENG_nHSYNC2 GND 1
32 PPC_LD(28) A32 GND
nLSYNC2 27 4 ENG_nHSYNC1 GND 2
33 PPC_LA(15) B1 GND
nLSYNC1 26 5 ENG_nHSYNC0 3.3V 3
34 PPC_LD(29) B2 GND
VCLK4_1B_N 25 6 ENG_VCLK3_N 5V 4
35 PPC_LA(16) B3 GND
VCLK4_1B_P 24 7 ENG_VCLK3_P FDI_nDETECT 5
36 PPC_LD(30) B4 PEX_ERIP_RX_P
DGND 23 8 GND FDI_NOT_READY 6
37 GND B5 PEX_ERIP_RX_N
VCLK3_1B_P 22 9 ENG_VCLK2_P FDI_EN_COPY_EXIT 7
38 PPC_LD(31) B6 GND
VCLK3_1B_N 21 10 ENG_VCLK2_N FDI_nEN_COPY_CNT 8
39 PPC_LA(17) B7 GND
DGND 20 11 GND FDI_nEN_ZOOM 9
40 GND B8 PEX_ICON_TX_P
VCLK2_1B_N 19 12 ENG_VCLK1_N FDI_nEN_PTRAY 10
41 PPC_LA(18) B9 PEX_ICON_TX_N
VCLK2_1B_P 18 13 ENG_VCLK1_P FDI_nEN 11
42 PPC_nCS1_FLASH B10 GND
DGND 17 14 GND 43 PPC_LA(19) B11 GND
VCLK1_1B_P 16 15 ENG_VCLK0_P 44 GND B12 GND
VCLK1_1B_N 15 16 ENG_VCLK0_N 45 PPC_LA(20) B13 PEX_ICON_CLK_P
DGND 14 17 GND 46 PPC_nOE_EXP B14 PEX_ICON_CLK_N
POWER_MODE0 13 18 POWER_MODE0 47 PPC_LA(21) B15 GND
nEND_PAGE 12 19 ENG_nENDPAGE 48 GND B16 GND
nPRINT_ACK 11 20 ENG_nPRT_ACK
49 PPC_LA(22) B17 PEX_FCON_TX_P
nEXIT_ENGINE 10 21 ENG_nEXIT
50 PPC_nWE0_EXP B18 PEX_FCON_TX_N
nERROR_ENGINE 9 22 ENG_nERROR CN27
51 PPC_LA(23) B19 GND
nACR_ENGINE 8 23 ENG_nACR NETWORK
52 GND B20 GND
nREADY_ENGINE 7 24 ENG_nREADY
53 PPC_LA(24) B21 nIRQ_FCON_WAKEUP
POWER_MODE1 6 25 POWER_MODE1 GND 1
54 nRST_EDGE B22 nPRSNT_ERIP
nRESET 5 26 ENG_nRESET 1.8V 2
55 GND B23 GND
DGND 4 27 GND NDIP_3 3
56 GND B24 GND
USB_DM 3 28 ENG_DM NDIN_3 4
57 GND B25 GND
USB_DP 2 29 ENG_DP NDIP_2 5
30 GND 58 GND B26 5V
DGND 1 NDIN_2 6
59 GND B27 5V NDIP_1 7
60 PPC I2C1 SCL EDGE
PPC_I2C1_SCL_EDGE B28 5V NDIN_1 8
61 GND B29 5V
JC39-01202A NDIP_0 9
62 PPC_I2C0_SCL B30 5V NDIN_0 10
CN29 63 3.3V B31 5V 3.3V 11
SATA SIGNAL 64 GND B32 GND LED_2 12
65 3.3V
1 1 GND 3.3V 13
66 PPC_I2C1_SDA
HDD 2
3
2
3
SATA_TX_P
SATA_TX_N
67
68
3.3V
PPC_I2C0_SDA
LED_1
FGND
FGND
14
15
16
4 4 GND 69 3.3V
5 5 SATA_RX_N 70 GND
6 6 SATA_RX_P 71 GND
7 7 GND 72 GND
JC39-01203A
CN10
SATA POWER
1 1 SATA_5V
2 2 GND
3 3 SATA_12V
4 4 GND
8-3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Downloaded from www.Manualslib.com manuals search engine
8. System
m Diagram
CN2
XE LAMP
1 1
XE-LAMP
2 2
JC39 01162A
JC39-01162A
CCD CONN2 CCD CONN2
CN2 CN2
DGND 1 1 DGND
AFE_ADC_CLK 2 2 AFE_ADC_CLK
DGND 3 3 DGND
DGND 4 4 DGND
AFE_SAMPLE 5 5 AFE_SAMPLE
DGND 6 6 DGND
DGND 7 7 DGND
AFE_HOLD 8 8 AFE_HOLD
DGND 9 9 DGND
DGND 10 10 DGND
AFE_SCLK 11 11 AFE_SCLK
AFE_SLOAD
DGND
12
13
12
13
AFE_SLOAD
DGND ENGINE PBA
AFE_SDI 14 14 AFE_SDI
AFE_SDO 15 15 AFE_SDO
DGND 16 16 DGND JC39-01178A
TXCLK1+ 17 17 TXCLK1+
JC39-01185A
TXCLK1- 18 18 TXCLK1- CN4 CN1 CN26
CN2
DGND 19 19 DGND SCAN JOINT CONN SCAN I/F CONN SCAN I/F
ENGINE I/F CONN
TXOUTC1+ 20 20 TXOUTC1+
TXOUTC1- 21 21 TXOUTC1- 24V_L 1 15 24V_L 1 18 1 5V5_L2
5V 18
DGND 22 22 DGND 24V_L 2 14 24V_L 2 17 2 5V5_L2
5V 17
TXOUTB1+ 23 23 TXOUTB1+ DGND 3 13 DGND 3 16 3 5V5_L2
5V 16
TXOUTB1- 24 24 TXOUTB1- DGND 4 12 DGND 4 15 4 24V4
24V 15
DGND 25 25 DGND 5V 5 11 5V 5 14 5 24V4
24V 14
TXOUTA+ 26 26 TXOUTA+ 5V 6 10 5V 6 13 6 24V4
24V 13
TXOUTA- 27 27 TXOUTA- 5V_L 7 9 5V_L 7 12 7 24V4
24V 12
DGND 28 28 DGND DGND 8 8 DGND 8 11 8 5VE
5V_S 11
TXCLK2+ 29 29 TXCLK2+ 5V_S 9 7 5V_S 9 Wall 10 9 nADF_PAPER_DETECT
DGND 10 6 DGND nPAPER_EMPTY 10
TXCLK2- 30 30 TXCLK2- 10 CON 9 10 nADF_COVER_OPEN
3_3V 11 5 3_3V nCOVER_OPEN_SLEEP 9
DGND 31 31 DGND EN_EXIT_LED 8 11 8 11 EN_EXIT_LED
TXOUTC2+ 32 32 TXOUTC2+ POWER_CON2 12 4 POWER_CON2 12 7 12 DGND
EN_EXIT_LED 13 3 EN_EXIT_LED DGND 7
TXOUTC2- 33 33 TXOUTC2- DGND 6 13 6 13 DGND
DGND 34 DADF TXD
DADF_TXD 14 2 DADF TXD
DADF_TXD 14 5 14 DGND
34 DGND DGND 5
TXOUTB2+ 35 DADF_RXD 15 1 DADF_RXD 15 4 15 DGND
35 TXOUTB2+ DGND 4
nRST_DADF 16 30 nRST_DADF 16 3 16 DGND
TXOUTB2- 36 36 TXOUTB2- DGND 3
nSCAN_READ 17 29 nSCAN_READ 17 2 17 DGND
DGND 37 37 DGND DGND 2
HOME 18 28 HOME 18 1 18 DGND
TXOUTA+ 38 38 TXOUTA+ DGND 1
CCD_LAMP_CTL_S 19 27 CCD_LAMP_CTL_S
TXOUTA- 39 39 TXOUTA-
PWM_WHITE_LED_CTL 20 26 PWM_WHITE_LED_CTL
DGND 40 40 DGND
FAN SCAN_CTL 21 25 FAN SCAN_CTL
FAN SCAN FEEDBACK 22 24 FAN SCAN FEEDBACK
SCAN_MTR_MS1 23 23 SCAN_MTR_MS1
JC39-01162A SCAN_MTR_MS2 24 22 SCAN_MTR_MS2
nEN_SCAN_MTR 25 21 nEN_SCAN_MTR
CCD CONN3 CCD CONN3 SCAN_MTR_PLS 26 20 SCAN_MTR_PLS
CN3 CN3 SCAN_MTR_DIR 27 19 SCAN_MTR_DIR
COVER_OPEN1 28 18 COVER_OPEN1
DIR_LSU_SKEW_MOT1 1 1 DIR_LSU_SKEW_MOT1
MOTOR_VREF 29 17 MOTOR_VREF
nEN_LSU_SKEW_MOT1 2 2 nEN_LSU_SKEW_MOT1
COVER_OPEN2 30 16 COVER_OPEN2
CLK_LSU_SKEW_MOT1 3 3 CLK_LSU_SKEW_MOT1
DIR_LSU_SKEW_MOT2 4 4 DIR_LSU_SKEW_MOT2
nEN_LSU_SKEW_MOT2 5 5 nEN_LSU_SKEW_MOT2
CLK_LSU_SKEW_MOT2 6 6 CLK_LSU_SKEW_MOT2 CN4
DIR_LSU_SKEW_MOT3 7 7 DIR_LSU_SKEW_MOT3 SCAN MOTOR
nEN_LSU_SKEW_MOT3 8 8 nEN_LSU_SKEW_MOT3
CLK_LSU_SKEW_MOT3 9 9 CLK_LSU_SKEW_MOT3 nB_SCAN_MTR 1 6
DIR_LSU_SHUTTER_MOT
nEN_LSU_SHUTTER_MOT
CLK_LSU_SHUTTER_MOT
10
11
12
10
11
12
DIR_LSU_SHUTTER_MOT
nEN_LSU_SHUTTER_MOT
CLK_LSU_SHUTTER_MOT
SCAN PBA 24V
B_SCAN_MTR
A_SCAN_MTR
2
3
4
5
4
3
SCAN MOTOR
(HB STEP MOTOR)
nEN_WASTE_MOT 13 13 nEN_WASTE_MOT 24V 5 2
CLK_WASTE_MOT 14 14 CLK_WASTE_MOT nA_SCAN_MTR 6 1
nSS_LSU_MOT1 15 15 nSS_LSU_MOT1
nRDY_LSU_MOT1 16 16 nRDY_LSU_MOT1
CLOCK_LSU_MOT1 17 17 CLOCK_LSU_MOT1
nSS_LSU_MOT2 18 18 nSS_LSU_MOT2
nRDY_LSU_MOT2 19 19 nRDY_LSU_MOT2
CLOCK_LSU_MOT2
24V3_L1
20
21
20
21
CLOCK_LSU_MOT2
24V3_L1
SCAN JOINT PBA
24V3_L1 22 22 24V3_L1
24V5_L 23 23 24V5_L
5V4 L1
5V4_L1 24 24 5V4 L1
5V4_L1
24V3 25 25 24V3
DGND 26 26 DGND
DGND 27 27 DGND
DGND 28 28 DGND
nDETECT_LSU_SHUTTER1 29 29 nDETECT_LSU_SHUTTER1 CN5
LSU_TEMP 30 30 LSU_TEMP SCAN FAN
nWASTE_INSTALL_AVR 31 31 nWASTE_INSTALL_AVR
FAN SCAN CTL 1 3
WASTE_COUNT 32 32 WASTE_COUNT
FAN SCAN FEEDBACK 2 2 SCAN FAN
WASTE_LEVEL 33 33 WASTE_LEVEL
GND 3 1
EN_WASTE_LED 34 34 EN_WASTE_LED
DIR_WASTE_MOT 35 35 DIR_WASTE_MOT
PWM_FAN_LSU1 36 36 PWM_FAN_LSU1
nDETECT_FAN_LSU1 37 37 nDETECT_FAN_LSU1
PWM_FAN_LSU2 38 38 PWM_FAN_LSU2
nDETECT_FAN_LSU2 39 39 nDETECT_FAN_LSU2
DGND 40 40 DGND
JC39-01165A JC39-01169A
6 CN7
5 CN10 CN1
PICKUP_REGI MOTOR CONN
PICKUP MOTOR 4 MIXED/DUP_REG SENSOR MIXED/DUP_REG SENSOR
(HB STEP MOTOR) 3 1 nB_PICKUP_MTR 5V_L 8 1 5V_L
2 2 24V DGND 7 2 DGND
1 3 B_PICKUP_MTR
nPAPER_DUP_REGI 6 3 nPAPER_DUP_REGI
4
5
6
A_PICKUP_MTR
24V
nA_PICKUP_MTR
DADF PBA DGND
nPAPER_MIXED1
nPAPER_MIXED2
5
4
3
4
5
6
DGND
nPAPER_MIXED1
nPAPER_MIXED2
7 nB_REGI_MTR
nPAPER_MIXED3 2 7 nPAPER_MIXED3
8 24V DGND 1 8 DGND
9 B_REGI_MTR
6 10 A_REGI_MTR
5 11 24V
REGI MOTOR 4 12 nA_REGI_MTR
(HB STEP MOTOR) 3
2
1 DADF MIXED PBA
JC39-01166A
6 CN8 JC39-01328A
5 PLATEN_EXIT MOTOR CONN
PLATEN MOTOR 4 CN15
(HB STEP MOTOR) 3 1 nB_PLATEN_MTR REGI/FEED/DETECT SENSOR
2 2 24V
3 B_PLATEN_MTR GND 1 3 PHOTO
1
4 A_PLATEN_MTR nPAPER_REGI 2 2 INTERRUPTOR
5 24V 5V_L 3 1 (REFLECTIVE)
6 nA_PLATEN_MTR 5V_L 4 3
PHOTO
7 nB_EXIT_MTR GND 5 2
INTERRUPTOR
8 24V nPAPER_FEED 6 1
9 B_EXIT_MTR 5V_S 7 3
PHOTO
6 10 A_EXIT_MTR GND 8 2
INTERRUPTOR
5 11 24V nPAPER_DETECT 9 1
EXIT MOTOR 4 12 nA_EXIT_MTR
(HB STEP MOTOR) 3
2
1
JC39-01170A CN18
DUP_REV/EXIT_TURN SENSOR
CN3 3 PHOTO
DGND 1
JC39-01184A SCAN READ SENSOR
nDUP_REVERSE 2 2 INTERRUPTOR
PHOTO 3 1 DGND 5V_L 3 1 (REFLECTIVE)
INTERRUPTOR 2 2 nSCAN READ
nSCAN_READ DGND 4 3 PHOTO
(REFLECTIVE) 1 3 5V_L nEXIT_TURN 5 2 INTERRUPTOR
4 NC 5V_L 6 1 (REFLECTIVE)
NC 7
JC39-01168A
13CN5
DUPLEX REV SOL & STATUS LED CN14
DUPLEX EXIT JC39-01183A 1 24V DUPLEX EXIT SOLENOID
SOLENOID 2 SOLENOID_REVERSE 24V 1
3 5V DUPLEX EXIT
NC 2
4 LED1 SOLENOID
SOLENOID_EXIT 3
5 LED2
CN1
DUPLEX EXIT SOLENOID
5V 3
LED1 2 JC39-01328A
LED2 1
CN17
JC39-01176A PICKUP_CHECK/COVER OPEN
5V_L 1 3
PHOTO
DGND 2 2
INTERRUPTOR
DADF LED PBA nPICKUP_CHECK
5V_L
3
4
1
3
PHOTO
DGND 5 2
INTERRUPTOR
nCOVER_OPEN 6 1
CN12
EXIT/EXIT TURN JAM SENSOR JC39-01180A
5V_L 1 3
PHOTO
DGND 2 2
INTERRUPTOR
nPAPER_EXIT 3 1
5V_L 4 3
PHOTO
DGND 5 2
INTERRUPTOR
nEXIT_TURN_JAM 6 1
JC39-01174A
JC39-01329A
CN31
LENGTH1_2_3 SENSOR JC39-01167A
3 1 5V_L
PHOTO CN34 CN21
2 2 GND
INTERRUPTOR WIDTH SENSOR WIDTH SENSOR
1 3 nPAPER_LENGTH1
3 4 5V_L 5V_L 6 1 5V_L
PHOTO
2 5 GND nPAPER_WIDTH3 5 2 nPAPER_WIDTH3
INTERRUPTOR
1 6 nPAPER_LENGTH2 nPAPER_WIDTH1 4 3 nPAPER_WIDTH1
3 7 5V_L nPAPER_WIDTH2 3 4 nPAPER_WIDTH2
PHOTO
2 8 GND DGND 2 5 DGNDD
INTERRUPTOR
1 9 nPAPER_LENGTH3 DGND 1 6 DGNDD
8-4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Downloaded from www.Manualslib.com manuals search engine
SAMSUNG ELECTRONICS
8.5 BOTTLE JOINT BOARD & SIDE JOINT BOARD
JC39-01122A JC39-01097A
CN4 CN3
EXIT STEP SUCTION FAN(45ppm)
1 6 1 nB_EXIT2 OUT_FAN_SUCTION1 1
2 5 2 N/C nDETECT_FAN_SUCTION1 2
m Diagram
8-5
1 2 12V 1
EXIT Wall 1 EN_EXIT_CLUTCH
GND 2
8. System
CLX-9250/9350 series
Service Manual
Wall Wall Wall
Connector Connector Connector
SAMSUNG ELECTRONICS
8.6 DC CONTROL BOARD & LSU JOINT BOARD
JC39-00793A
CN7
LSU SHUTTER SENSOR
5V4_L1 1 3
LSU SHUTTER
S
DGND 2 2
SENS
SOR
nDETECT_LSU_SHUTTER1 3 1
JC39-01127A
CN3
LSU SHUTTER MOTOR
nB_LSU_SHUTTER 1 4
B_LSU_SHUTTER 2 3 LSU SHUTTER
S
nA_LSU_SHUTTER 3 2 STEP
P MOTOR
A_LSU_SHUTTER 4 1
m Diagram
CN10
LSU TEMP
GND 1 2
LSU TEMP
T SENSOR
LSU_TEMP 2 1
8-6
8. System
CN11
LSU MOTOR
24V3 1 5
GND 2 4
LS
SU POLYGON
nSS_LSU_MOT1 3 3
MOTOR Y,M
nRDY_LSU_MOT1 4 2
CLOCK_LSU_MOT1 5 1
24V3 6 5
GND 7 4
LS
SU POLYGON
nSS_LSU_MOT2 8 3
MOTOR C,K
nRDY_LSU_MOT2 9 2
CLOCK_LSU_MOT2 10 1
CN4
LSU SKEW MOTOR
A_LSU_SKEW1 1 4
nA_LSU_SKEW1 2 3
LSU SKEW
S MOTOR Y
B_LSU_SKEW1 3 2
nB_LSU_SKEW1 4 1
A_LSU_SKEW2 5 4
nA_LSU_SKEW2 6 3
LSU SKEW
S MOTOR M
B_LSU_SKEW2 7 2
nB_LSU_SKEW2 8 1
A_LSU_SKEW3 9 4
nA_LSU_SKEW3 10 3
LSU SKEW
S MOTOR C
B_LSU_SKEW3 11 2
nB_LSU_SKEW3 12 1
CLX-9250/9350 series
Wall
Service Manual
CON
Side Cover S/W
8. System
m Diagram
JC39-01105A
CN10 CN11
CASSETTE JOINT CASSETTE JOINT
24V_C 1 15 24V3
5V_C 2 14 5V4_L1
3_3V_C 3 13 3_3V
JC39-01143A nPAPER_EMPTY1 4 12 nPAPER_EMPTY1
nPAPER_FEED1 5 11 nPAPER_FEED1
CN15
nPAPER_LIFT1 6 10 nPAPER_LIFT1
LIFT DC
nPAPER_EMPTY2 7 9 nPAPER_EMPTY2
2 1 nA_CASSETTE_DC1 nPAPER_FEED2 8 8 nPAPER_FEED2
LIFT DC Tray 1
1 2 A_CASSETTE_DC1 nPAPER_LIFT2 9 7 nPAPER_LIFT2
2 3 nA_CASSETTE_DC2 nA_CASSETTE_DC2 10 6 nA_CASSETTE_DC2
LIFT DC Tray 2
1 4 A_CASSETTE_DC2 A_CASSETTE_DC2 11 5 A_CASSETTE_DC2
nA_CASSETTE_DC1 12 4 nA_CASSETTE_DC1
A_CASSETTE_DC1 13 3 A_CASSETTE_DC1
PICKUP_CLUTCH1 14 2 EN_PICKUP_CLUTCH1
PICKUP_CLUTCH2 15 1 EN_PICKUP_CLUTCH2
CASSETTE JOINT
PBA
JC39-01111A
SUPPLIES
CN1
CRUM JOINT YM
8 8 8 8 1 EN_ERASER1
7 7 7 7 2 3.3V_CRUM
6 6 6 6 3 SDA_CRUM_DEV
CRUM Joint
DEVE CRUM 5 5 5 5 4 SCL_CRUM_DEV
Board
JOINT Y 4 4 4 4 5 TC_VIN1
Y
3 3 3 3 6 TSEN_VCOUNT1
2 2 2 2 7 nDETECT_OPC_CLEAN
N1
1 1 1 1 8 GND JC39-01106A
8 8 8 8 9 EN_ERASER2
CN12 CN13
7 7 7 7 10 3.3V_CRUM
DRIVE JOINT POWER DRIVE JOINT POWER
6 6 6 6 11 SDA_CRUM_DEV
CRUM Joint
DEVE CRUM 5 5 5 5 12 SCL_CRUM_DEV nDETECT_OPC_CLEAN4 24 23 nDETECT_OPC_CLEAN4
Board
JOINT M 4 4 4 4 13 TC_VIN2 - 23 24 -
M
3 3 3 3 14 TSEN_VCOUNT2 nDETECT_OPC_CLEAN2 22 21 nDETECT_OPC_CLEAN2
2 2 2 2 15 nDETECT_OPC_CLEAN
N2 nDETECT_OPC_CLEAN3 21 22 nDETECT_OPC_CLEAN3
1 1 1 1 16 GND DIR_ITB_BLDC 20 19 DIR_ITB_BLDC
nDETECT_OPC_CLEAN1 19 20 nDETECT_OPC_CLEAN1
CLK_ITB_CLEAN_MOT 18 17 CLK_ITB_CLEAN_MOT
MODE_ITB_CLEAN_MOT 17 18 MODE_ITB_CLEAN_MOT
JC39-01112A DIR_ITB_CLEAN_MOT 16 15 DIR_ITB_CLEAN_MOT
nEN_ITB_CLEAN_MOT 15 16 nEN_ITB_CLEAN_MOT
CN2
DGND 14 13 DGND
CRUM JOINT CK
DGND 13 14 DGND
8 8 8 8 1 EN_ERASER3 DGND 12 11 DGND
7 7 7 7 2 3.3V_CRUM DGND 11 12 DGND
6 6 6 6 3 SDA_CRUM_DEV DGND 10 10 DGND
CRUM Joint 4 SCL_CRUM_DEV DGND 9 9 DGND
DEVE CRUM 5 5 5 5
Board 5 TC_VIN2 24V1_L 8 7 24V1_L
JOINT C 4 4 4 4
C 6 TSEN_VCOUNT3 DGND 7 8 DGND
3 3 3 3
2 2 2 2 7 nDETECT_OPC_CLEAN
N3 24V1 L
24V1_L 6 5 24V1 L
24V1_L
1 1 1 1 8 GND 24V1_L 5 6 24V1_L
8 8 8 8 9 EN_ERASER4 24V3 4 3 24V3
7 7 7 7 10 3.3V_CRUM 24V1_L 3 4 24V1_L
6 6 6 6 11 SDA_CRUM_DEV 3_3V_CRUM 2 1 3_3V_CRUM
CRUM Joint 12 SCL_CRUM_DEV 5V4_L1 1 2 5V4_L1
DEVE CRUM 5 5 5 5
Board 13 TC_VIN4
JOINT K 4 4 4 4
K 14 TSEN_VCOUNT3
3 3 3 3
2 2 2 2 15 nDETECT_OPC_CLEAN
N4
1 1 1 1 16 GND
17 N/C
JC39-01191A
CN9 CN12
DRIVE JOINT SIGNAL DRIVE JOINT SIGNAL
CLK_BLDC_DEV1 1 1 CLK_BLDC_DEV1
nREADY_BLDC_DEV1 2 2 nREADY_BLDC_DEV1
ITB ENCODER BOARD JC39-01113A nEN_BLDC_DEV1 3 3 nEN_BLDC_DEV1
GAIN_BLDC_DEV1 4 4 GAIN_BLDC_DEV1
CN1 CN3
BRAKE_BLDC_DEV1 5 5 BRAKE_BLDC_DEV1
ITB JOINT ITB JOINT
CLK_BLDC_DEV2 6 6 CLK_BLDC_DEV2
SUPPLIES SCL_CRUM_ITB 1 7 7 7 1 SCL_CRUM_ITB nREADY_BLDC_DEV2 7 7 nREADY_BLDC_DEV2
CN2
SDA_CRUM_ITB 2 6 6 6 2 SDA_CRUM_ITB nEN_BLDC_DEV2 8 8 nEN_BLDC_DEV2
ITB CLEANING CRUM
5V 3 5 5 5 3 5V GAIN_BLDC_DEV2 9 9 GAIN_BLDC_DEV2
CRUM Joint
GND 1 1 1 1 GND ITB_ENCODER_B 4 4 4 4 4 ITB_ENCODER_B BRAKE_BLDC_DEV2 10 10 BRAKE_BLDC_DEV2
Board
SCL_CRUM_ITB 2 2 Wall 2 2 SCL_CRUM_ITB 3_3V_CRUM 5 3 3 3 5 3_3V_CRUM CLK_BLDC_DEV3 11 11 CLK_BLDC_DEV3
SDA_CRUM_ITB 3 3 CON 3 3 SDA_CRUM_ITB GND 6 2 2 2 6 GND nREADY_BLDC_DEV3 12 12 nREADY_BLDC_DEV3
3_3V_CRUM 4 4 4 4 3_3V_CRUM ITB_ENCODER_A 7 1 1 1 7 ITB_ENCODER_A nEN_BLDC_DEV3 13 13 nEN_BLDC_DEV3
GAIN_BLDC_DEV3 14 14 GAIN_BLDC_DEV3
BRAKE_BLDC_DEV3 15 15 BRAKE_BLDC_DEV3
CLK_BLDC_DEV4 16 16 CLK_BLDC_DEV4
nREADY_BLDC_DEV4 17 17 nREADY_BLDC_DEV4
nEN_BLDC_DEV4 18 18 nEN_BLDC_DEV4
JC39-00975A GAIN BLDC DEV4
GAIN_BLDC_DEV4 19 19 GAIN BLDC DEV4
GAIN_BLDC_DEV4
BRAKE_BLDC_DEV4 20 20 BRAKE_BLDC_DEV4
CN4
CLK_BLDC_ITB 21 21 CLK_BLDC_ITB
DEVE BLDC Y
nREADY_BLDC_ITB 22 22 nREADY_BLDC_ITB
10 1 CW/CCW EN_BLDC_ITB 23 23 EN_BLDC_ITB
9 2 CLK_BLDC_Dev1 GAIN_BLDC_ITB 24 24 GAIN_BLDC_ITB
8 3 nREADY_BLDC_Dev1 BRAKE_BLDC_ITB 25 25 BRAKE_BLDC_ITB
7 4 nEN_BLDC_Dev1 DIR_ITB_MOT 26 26 DIR_ITB_MOT
DEVE BLDC 6 5 GAIN_BLDC_Dev1 nEN_ITB_MOT 27 27 nEN_ITB_MOT
YELLOW 5 6 BRAKE_BLDC_Dev1 CLK_ITB_MOT 28 28 CLK_ITB_MOT
4 7 GND MODE_ITB_MOT 29 29 MODE_ITB_MOT
3 8 GND EN_ERASER1 30 30 EN_ERASER1
2 9 24V1_L EN_ERASER2 31 31 EN_ERASER2
1 10 24V1_L EN_ERASER3 32 32 EN_ERASER3
EN_ERASER4 33 33 EN_ERASER4
JC39-00975A TSEN_VCONT1 34 34 TSEN_VCONT1
TSEN_VCONT2 35 35 TSEN_VCONT2
CN7
TSEN_VCONT3 36 36 TSEN_VCONT3
DEVE BLDC M
TSEN_VCONT4 37 37 TSEN_VCONT4
10 1 CW/CCW DGND 38 38 DGND
9 2 CLK_BLDC_Dev2 TC_VIN1 39 39 TC_VIN1
DEVE BLDC
8
7
6
3
4
5
nREADY_BLDC_Dev2
nEN_BLDC_Dev2
GAIN_BLDC_Dev2
DRIV
VE JOINT PBA TC_VIN2
TC_VIN3
TC_VIN4
40
41
42
40
41
42
TC_VIN2
TC_VIN3
TC_VIN4
MAGENTA 5 6 BRAKE_BLDC_Dev2 DGND 43 43 DGND
4 7 GND nDETECT_T1_POS1 44 44 nDETECT_T1_POS1
3 8 GND nDETECT_T1_POS2 45 45 nDETECT_T1_POS2
2 9 24V1_L nSENS_SPEED1 46 46 nSENS_SPEED1
1 10 24V1_L nSENS_SPEED2 47 47 nSENS_SPEED2
nSENS_SPEED3 48 48 nSENS_SPEED3
JC39-00975A nSENS_SPEED4 49 49 nSENS_SPEED4
EN_OPC_CLUTCH1 50 50 EN_OPC_CLUTCH1
CN5
EN_OPC_CLUTCH2 51 51 EN_OPC_CLUTCH2
DEVE BLDC C
EN_OPC_CLUTCH3 52 52 EN_OPC_CLUTCH3
10 1 CW/CCW EN_OPC_CLUTCH4 53 53 EN_OPC_CLUTCH4
9 2 CLK_BLDC_Dev3 SCL_CRUM_DEV 54 54 SCL_CRUM_DEV
8 3 nREADY_BLDC_Dev3 SDA_CRUM_DEV 55 55 SDA_CRUM_DEV
7 4 nEN_BLDC_Dev3 SCL_CRUM_ITB 56 56 SCL_CRUM_ITB
DEVE BLDC 6 5 GAIN_BLDC_Dev3 SDA_CRUM_ITB 57 57 SDA_CRUM_ITB
CYAN 5 6 BRAKE_BLDC_Dev3 ITB_ENCODER_A 58 58 ITB_ENCODER_A
4 7 GND ITB_ENCODER_B 59 59 ITB_ENCODER_B
3 8 GND DGND 60 60 DGND
2 9 24V1_L
1 10 24V1_L
JC39-01126A
CN8
DEVE BLDC K
10 1 CW/CCW
9 2 CLK_BLDC_Dev4
8 3 nREADY_BLDC_Dev4
7 4 nEN_BLDC_Dev4
DEVE BLDC 6 5 GAIN_BLDC_Dev4
BLACK 5 6 BRAKE_BLDC_Dev4
4 7 GND
3 8 GND
2 9 24V1_L
1 10 24V1_L
11 N/C
8-7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Downloaded from www.Manualslib.com manuals search engine
8. System
m Diagram
8.8 HEATER
JC39-01115A
HEATER S/W
BLK
BLK
WHT
WHT
Themostat BLK
SCANNER A
JC39-01085A
WHT
WHT
MAIN S/W
BLK FUSE
JC39-01154A
Themostat BLK
SCANNER B
WHT
BLK
INLET
WHT
SOCKET
GND
GND
BLK
CASSETTE
Themostat WHT
BLK
DCF/HCF
Themostat WHT
8-8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Downloaded from www.Manualslib.com manuals search engine
9. System Recovery
9. System Recovery
[Preparation]
NOTE - Use min 2GB USB stick or bigger for HDD Recovery.
If you use less than 2GB USB stick you’ll get a messa
age ‚FAIL: Please replace the HDD.‘:
D i HDD recovery th
During the running
i process uses USB memory
m f storing
for t i ttemp fil
files.
Please perform FW update using One ROM FW file e after completion of System Initialization. This is
a must to even all FW module levels including
g maiin FW module restored during
g HDD recovery y
procedure.
9-1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The entry point for the application is login page along with
w an option to select the recovery method. The UI
displays the below page when System failure happens s during boot up.
1) HDD Format
- USB : This can format the HDD using USB stick. All data except the stored in MSOK will be deleted.
2) HDD Repair : This can restore the internal system byb checking the HDD error.
This is for HDD recovery itself and irrrelevant to the user data in device.
9-2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
User enters the Password details for performing autheentication through the UI control provided on the login
page. The password will be 1934 as the factory setting
g password.
On successful authentication:
• The user will be directed to the USB page, Network
N page or HDD repair page depending upon
selection of USB option or Net
Network
ork option re
especti el or Repair option
espectively option.
• The user will be directed to the Confirmation page if there is no error or to Error page (section 9.5)
with appropriate error message when Hidden n Partition option is selected.
On authentication failure:
• The Error page (section 9.5) will be displayed along with the failure message.
9.2 USB
9-3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
Caution - Use min 2GB USB stick or bigger for HDD Recovery
9-4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9.3 Network
This page contains two sections :
This section provides following options to configure the e settings for the server, which will be accessed by
the device to recover the system:
1. Server IP : IP address of the server.
2. User ID : user ID of the server to login into the
t server system
3. Password : password of the server system
4. Shared folder : name of the shared folder on the server, where the packages for the system
recovery are present.
9-5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9 4 1 Next button
9.4.1
When the user clicks Next button then the actual recov
very of the system will take place.
The user will be directed to the Progress page.
9-6
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9-7
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9-8
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9.7.1 Authentication
In case authentication fails, UI should display an error message “Login Failed: Enter Login details again”.
When the packages are not found then the UI should display
d the error message corresponding to the
missing packages in case of Hidden Partition, USB and Network.
When the network is not established or samba settingss are failed then the UI should display the
corresponding error message related to network failure
e.
9-9
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
When the user clicks Next button then the HDD repairr of the system will take place.
9-1
10
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
9-1
11
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
The following tools are recommended safe and easy trroubleshooting as described in this service manual.
10--1
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
8 Soft cloth
8. To clean the frame and scan Service
glass.
10 Bl
10. Black
k cloth
l th T cover the
To th OPC off the
th S i
Service
imaging unit.
10--2
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
(Screw, E-Ring)
16 G
16. Grease T remove the
To th noise
i byb gear. S i
Service
2. SPY272 : JC81-08664A
(100g)
10--3
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
10.2 Abbreviations
ACR
C Auto Color
C Registration
ADC Analog to digital convert
AMS Application Management System
m
BD PBA Beam Detector PBA
CMS Color Management System
CRUM Customer Replaceable Unit Mod
dule
DADF Duplex Automatic Document Fee
eder
DCF Double Cassette Feeder
10--4
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series
10--5
Service Manual SAMSUNG ELECTRONICS
CLX-9250/9350 series