SINOXX 4122 Steel: Designation by Standards
SINOXX 4122 Steel: Designation by Standards
SINOXX 4122 Steel: Designation by Standards
Designation by Standards
C Si Mn Cr Mo Ni V W Others
Description
Stainless steel with very good wear, corrosion reistance and industrial polishability.
Applications
PK335 is used for pump shafts, fitting and compressor parts, as well as steam and water control valves and boat shafts for use in fresh
water.
Hardening
Harden from a temperature of 980-1050oC followed by oil quenching. Hardness after quenching is 49 HRC.
Tempering
Tempering temperature: 150-200oC, 650-750oC
Notch
Tensile strength Elongation impact
Size range mm Heat treatment condition 0.2 % proof stress (N/mm2)
(N/mm2) (%) energy
(ISO-V) (J)
Tempering Diagram
Forging
Hot forming temperature: 1100-800oC, slow cooling.
Machinability
Metal-cutting machining is the same as for special engineering steel grades of corresponding strength.
Welding
Limited weldability using the manual arc and TIG welding processes, as hardening occurs in the heat-affected zone. Preheat to between
300 and 400oC. Filler metals: 1740, Nicro82.
Unless otherwise specified, registered trademarks are property of SIJ Metal Ravne company. Copyright 2016 by SIJ Metal Ravne d.o.o.
All rights reserved. Contact our Sales Office for more information.