Professional Documents
Culture Documents
UAD Plug-Ins Manual v8
UAD Plug-Ins Manual v8
Customer Support
USA (toll-free): 1-877-698-2834
International: +1-831-440-1176
NOTICES
Disclaimer
The information contained in this manual is subject to
change without notice. Universal Audio, Inc. makes no
warranties of any kind with regard to this manual, includ-
ing, but not limited to, the implied warranties of mer-
chantability and fitness for a particular purpose. Univer-
sal Audio, Inc. shall not be liable for errors contained
herein or direct, indirect, special, incidental, or conse-
quential damages in connection with the furnishing, per-
formance, or use of this material.
Copyright
Copyright ©2015 Universal Audio, Inc. All rights reserved.
Trademarks
Universal Audio, the Universal Audio “diamond” logo,
Apollo, Apollo Twin, Apollo 16, Unison technology,
UAD, UAD Series, UAD-1, UAD-2, UAD-2 Satellite, Pow-
ered Plug-Ins, 1176LN, 1176SE, Teletronix, LA-2A, LA-
3A, LA-610, LA-610MkII, 2-1176, 2-610, 6176, 710
Twin-Finity, 2192, 4-710d, Cambridge EQ, DreamVerb,
Plate 140, Precision Limiter, RealVerb Pro, Precision Buss
Compressor, Precision De-Esser, Precision Maximizer,
and “Analog Ears | Digital Minds,” are among the trade-
marks, trade names, and service marks owned by UA
that may appear on the Site, many of which are regis-
tered in the United States and other countries. This is not
a comprehensive list of all UA trademarks. All UA trade-
marks inure to the benefit of UA. Other trademarks and
trade names that may appear on the Site and which are
not owned by UA are owned by the respective owners.
Note: Unless specified otherwise, for descriptive purposes within this manual,
“UAD-2” means all UAD-2 family products (SOLO, DUO, QUAD, OCTO,
UAD-2 Satellite, and Apollo audio interfaces).
ReadMe The ReadMe contains information that may not be available in other loca-
tions. Please review all the information in the ReadMe before installing or us-
ing UAD Powered Plug-Ins. The ReadMe.rtf file is presented for viewing dur-
ing the software installation process, and installed to:
Operation Documentation for UAD-2 and UAD Powered Plug-Ins are separated by areas
Manuals of functionality, as described below. The user manuals are placed in the Doc-
umentation folder during software installation.
All manuals are in PDF format. PDF files require a free PDF reader application
such as Adobe Reader (Windows) or Preview (Mac).
The UAD System Manual is the complete operation manual for UAD function-
ality and applies to the entire UAD product line. It contains detailed informa-
tion about installing and configuring UAD devices, the UAD Meter & Control
Panel application, how to use UAD Powered Plug-Ins within a DAW, obtain-
ing optional plug-in licenses at the UA online store, and more. It includes ev-
erything about UAD except Apollo-specific information and individual UAD
Powered Plug-In descriptions.
The features and functionality of all the individual UAD Powered Plug-Ins is de-
tailed in the UAD Plug-Ins Manual. Refer to this document to learn about the
operation, controls, and user interface of each individual UAD plug-in.
Direct Developers
UAD Powered Plug-Ins includes plug-ins from our Direct Developer partners.
Documentation for these 3rd-party plug-ins are separate files that are written
and provided by the plug-in developers themselves. The filenames for these
plug-ins are the same as the plug-in names.
The Apollo Software Manual contains detailed information about how to con-
figure and control Apollo’s software features using the Console application
and Console Recall plug-in. Refer to the Apollo Software Manual to learn how
to operate these software tools and integrate Apollo’s audio interface func-
tionality into the DAW environment.
The Apollo Hardware Manual, Apollo Twin Hardware Manual, and Apollo
16 Hardware Manual (all available separately) contain complete information
about the audio interface hardware. Included are detailed descriptions for all
Apollo hardware features, control functions, and connections. Refer to the
Apollo Hardware Manuals to learn all about interfacing the hardware with
other devices, operating the panel controls, clocking, specifications, and re-
lated information.
Installed Locations
The UAD and Direct Developer manual files are copied to the hard drive by
the software installer to the following locations:
Videos The Universal Audio website contains many helpful videos that explain how
to install UAD hardware and software, register and authorize the products,
obtain optional plug-ins, and more:
• www.uaudio.com/videos
Blog Universal Audio’s online magazine is published regularly and contains lots of
useful and interesting information. How-to pages, artist/producer/engineer
interviews, support Q & A, detailed scientific notes, and other fascinating ar-
ticles make the UA blog a great place to routinely visit:
• www.uaudio.com/blog
Users Forum The unofficial UAD Powered Plug-Ins users forum, for the exchange of tips and
information, is on the world wide web at:
• www.uadforum.com
Support Hours Support specialists are available to assist you via email and telephone during
our normal business hours, which are from 9am to 5pm, Monday through Fri-
day, Pacific Standard Time.
Online Support To request online support, please visit the UA support pages, then click the
blue “Submit Support Ticket” button to create a help ticket:
• www.uaudio.com/support
Website • www.uaudio.com
Feedback Your feedback on the performance and features of UAD Powered Plug-Ins is
very important to us. Please send your comments and suggestions to us. Com-
ments (not technical support issues) may be sent to [email protected].
Ampex ATR-102
For more than three decades, the two-channel Ampex ATR-102 Mastering
Tape Recorder has turned music recordings into records. With its cohesive
sound, punch, and ability to provide subtle-to-deep tape saturation and color,
the Ampex ATR-102 is a fixture in major recording and mastering studios —
and is considered by many engineers to be the best-sounding tape machine
for final mixdown. The perfect complement to the workhorse Studer 800 Mul-
tichannel Tape Recorder, the Ampex ATR-102 plug-in can provide the final
“analog polish” on your music, turning songs into albums.
History Introduced in 1976, the Ampex ATR-102 2-Track Tape Recorder was a
near-instant hit, thanks to its revolutionary servo-controlled reel motors and
capstan, which provided smooth, continuous tape tension and handling. The
large capstan, and absence of pinch rollers, provided nearly non-existent
speed drift and ultra-low flutter. The clever ATR-102 design allowed users to
change out heads and guides in mere minutes, with a 1” head being a very
popular “hot-rod” modification in more recent years — especially when run-
ning at 15 IPS (inches per second). The ATR’s role in modern recording history
is so prevalent, that it would be easier to list classic albums that weren’t mixed
down on this machine, rather than to try to list all those that were.
All visual and aural references to the Ampex Product and all use of Ampex’s trademarks are being
made with written permission from Ampex Corporation. Any references to third party tape formula-
tions are used solely for identification and do not imply any endorsement by, or affiliation with, any
tape manufacturer.
Mixdown Tape The primary purpose of the UAD Ampex ATR-102 is to obtain tape mixdown
Deck sonics within the DAW environment. To obtain the classic tape mixdown
sound, instantiate the plug-in as the last insert on the output bus, after other
processing is applied (or possibly as the second-to-last insert, before a
brick-wall processor such as the (UAD Precision Limiter). Of course, creative
“non-standard” results can be obtained by placing the Ampex ATR-102 in
any channel insert or on busses in a send/return configuration.
Multiple Tape The UAD Ampex ATR-102 models seven popular magnetic tape formulas.
Types Each type has its own subtle sonic variation, distortion onset, and tape com-
pression characteristics. The tape types that can be selected depend on the
active tape speed and head type; all tape types are not available for all tape
speeds and head types. Lower fidelity types are included to facilitate more
signal coloration options.
Multiple Tape The original hardware machine was manufactured with an interchangeable
Heads head block system which enabled the system to be quickly converted to use ei-
ther 1/4” or 1/2” tape stock by simply swapping out the heads and recali-
brating the electronics. As track width increases, subtle improvements to sta-
bility, fidelity, and noise become apparent. A popular custom aftermarket
tape head is available which enables the use of 1” tape stock, enabling even
higher fidelity with its greater track widths. All three tape head widths are ac-
curately modeled and selectable in the UAD Ampex ATR-102.
Multiple Tape All four tape speeds in the original hardware are modeled in the UAD Ampex
Speeds ATR-102. Speeds of 3.75, 7.5, 15, and 30 inches per second (IPS) are avail-
able. Each speed provides distinct frequency shift, head bump, and distortion
characteristics. Higher speeds have higher fidelity; 3.75 IPS has a distinc-
tively “lo fi” character.
Multiple Tape machines can be setup with different calibration levels, which entails set-
Calibration ting unity gain from input through output based on the magnetic flux (amount
Levels
of magnetic field) of a given tape formulation. Different calibration levels pro-
vide different tape response characteristics for a given level into the recorder.
Four selectable calibration levels are available in the UAD Ampex ATR-102.
Modeled The original hardware was manufactured with isolation transformers, which
Transformer can color the signal. A common modification to the hardware tape machine
eliminates the transformers from the signal path to produce a (subjectively)
“cleaner” sound. UAD Ampex ATR-102 simulates the behavior of the trans-
formers in the hardware circuit, and can be optionally disabled in the plug-in,
providing both sonic options.
Tape Delay A popular application of multi-head tape recorders is to employ them for slap-
back tape echo effects. If the machine is running in record mode but the re-
corded signal is monitored from the repro head (as opposed to the sync
head), the physical space between these two heads results in a short delay be-
tween the signal sent to the recorder and the monitored signal. When these
signals are combined with mixer routings, the classic slapback echo is mani-
fest. The UAD Ampex ATR-102 implements the ability to reproduce this classic
effect with a simple set of controls, and expands the capabilities by extending
the available delay times beyond what is possible in the physical realm.
Automatic The ability of a magnetic tape recorder, which has inherently non-linear re-
Calibration sponse characteristics, to accurately reproduce an audio signal with a mini-
mum of noise and distortion requires precise adjustments to the system elec-
tronics. The calibration settings are based on the current tape speed,
formulation, emphasis EQ, and tape width. The hardware must be meticu-
lously re-adjusted each time a different tape, speed, emphasis EQ, or head
width is used (and for system wear and drift, even if these variables are not
changed). UAD Ampex ATR-102 has an automatic calibration feature that
tunes all calibration electronics with a single button.
Manual UAD Ampex ATR-102 includes the full suite of tools required to manually cal-
Calibration Tools ibrate the recorder. Manual calibration tools are provided so expert users can
calibrate the system to their preferred methods for obtaining desired results.
The manual calibration tools consist of a tone generator (with multiple test
tones and levels), a distortion meter with digital readouts, and a full suite of
Magnetic Reference Laboratory (MRL) alignment tapes, which are used to cal-
ibrate playback electronics.
Mono/Stereo While the UAD Ampex ATR-102 is a true stereo processor designed primarily
Operation for use in stereo-in/stereo-out configurations, it will also operate in
mono-in/stereo-out and mono-in/mono-out modes.
Quick Setup Set up the plug-in by first adjusting Tape Speed, Tape Type (tape formulation),
and Emphasis EQ, or simply select a factory preset. Note that as you lower
the tape speed, the tape “sound” becomes more audible. Once this basic
setup is made, adjust the L/R Record (gain) levels, for more or less tape/cir-
cuit coloration/saturation.
Artist Presets UAD Ampex ATR-102 includes artist presets from prominent ATR-102 users.
Some of the artist presets are in the internal factory bank and are accessed
via the host application’s preset menu. Additional artist presets are copied to
disk by the UAD installer. The additional presets can be loaded using the Set-
tings menu in the UAD Toolbar.
Primary & The graphical interface panel has two modes; open and closed. In closed
Secondary mode, the primary controls (those that are typically most used) are available
Controls
on the main panel interface and the tape reels are visible. Additional (typi-
cally less used) controls are available on the secondary panel in open mode.
The secondary controls panel (Figure 4 on page 31) is accessed by clicking
the OPEN button beneath the AMPEX label.
Meters The two Meters display signal levels of the plug-in for the left and right chan-
nels. Meter ballistics of the original hardware are modeled. The Meters can
be switched to display input or output levels in peak or VU modes.
Figure 3. One side of the Ampex ATR-102 “penthouse” showing meter and I/O controls
The plug-in operates at an internal level of –12 dBFS. Therefore a digital sig-
nal with a level of –12 dB below full scale digital (0 dBFS) at the plug-in input
will equate to 0 dB on the Meters when Reproduce is in its calibrated position,
which is marked with the “red arrow sticker.”
When Path Select is set to Thru, the Meters indicate signal levels at the input
of the plug-in prior to processing.
Note: Although there are separate left/right Meter controls for VU/Peak and
Input/Output, these controls are permanently linked and cannot be switched
individually for the left and right channels.
Input/Output These switches change the Meter to display levels at the input or output of the
plug-in. Input metering is a UAD-only feature which is unavailable in the orig-
inal hardware.
Input
When in Input mode, the Meter reflects the signal level after the Record (input)
gain when Path Select is set to Sync or Repro. In Input mode when Path Select
is set to Thru, the Meter reflects the pre-processed (raw input) signal level.
Output
When in Output mode, the meter reflects the signal level at the output of the
plug-in, which is just after the Reproduce (output) gain.
Peak/VU This switch is used to change Meter behavior between Peak or VU modes.
The Clip LED illuminates only when the machine’s audio electronics clip. The
Clip LED is not affected by the recorded tape signal, even if the tape is over-
loaded and distorting.
Reproduce Reproduce adjusts the signal level coming off the virtual tape
before the signal is sent to the Meters. There are two Reproduce
controls, one each for the left and right channels. The left/right
Reproduce controls can be adjusted individually, or simulta-
neously adjusted when Link mode (page 25) is active.
The Meters accurately reflect the output level (when set to Output mode) even
if Reproduce is not in its calibrated position. However, if Reproduce is moved
from the “cal” position, the Meters will no longer correspond to a particular
level being recorded onto the virtual tape. In this case, the Meters will not re-
flect the actual “operating level” of the tape because Reproduce changes the
signal level coming off the tape before it is sent to the Meters.
Note: The graphical interface panel values for Reproduce, which range from
0 – 10, are arbitrary and do not reflect a particular dB value.
Record Record adjusts the signal level into the plug-in and the tape cir-
cuitry. There are two Record controls, one for the left channel
and one for the right. These left/right Record controls can be
adjusted individually, or simultaneously when Link mode
(page 25) is active.
The available range is –∞ dB (off) to +9.3 dB. The default value is 0 dB. The
graphical interface panel values, which range from 0 – 10, are arbitrary and
do not reflect a particular dB value.
Tip: Click the “RECORD” label text to return the Record value to 0 dB.
Note that the Reproduce control is to the left of the Record control, which is
atypical of most signal flow designs, where inputs usually precede outputs
(flowing from left to right). This quirky arrangement of the Ampex ATR-102
I/O controls, where the input control “follows” the output control, is true to the
original hardware design. In Controls View, the Record (input) control pre-
cedes the Reproduce (output) control.
The Link parameter is stored within presets and can be accessed via automa-
tion.
Note: Although there are separate left/right Meter controls for VU/Peak and
Input/Output, these controls are permanently linked and cannot be switched
individually for the left and right channels, even if Unlink mode is active.
Link
In Link mode, modifying any left or right channel control causes its adjacent
stereo counterpart control to snap to the same position.
Important: When Unlink mode is active and Link is enabled, the left chan-
nel control values are copied to the right channel. Control offsets between
channels are lost in this case.
Unlink
When Unlink is active, the controls for the left and right channels are indepen-
dent. When unlinked, automation data is written and read by each channel
separately.
When the value is set to NAB (traditionally the United States standard), the
Hum Noise frequency is 60 Hz. When set to CCIR (traditionally the standard
in Europe and other regions), the Hum Noise frequency is 50 Hz. See “Noise
Enable” on page 33 and “Hum” on page 33 for more information about
Hum.
Tape Speed and Emphasis EQ were originally practical controls for recording
duration versus noise and local standards. Historically, the origin of the tape
machine (US or European) dictated the built-in EQ emphasis, but later ma-
chines like the Ampex ATR-102 had both circuits available.
Power Power is the plug-in bypass control. When set to OFF, em-
ulation processing is disabled, the Meters and control LEDs
are dimmed, the Bypass LED illuminates, and DSP usage is
reduced. Power is useful for comparing the processed settings to the original
signal.
Note: DSP usage is reduced only when DSP LoadLock is disabled. If DSP
LoadLock is enabled (the default setting), activating OFF will not reduce DSP
usage.
Tape Speed The Tape Speed control determines the speed of the tape trans-
port, in inches per second (IPS). Tape Speed affects the re-
corder’s fidelity and associated “head bump” sonics. Head
bump is bass frequency build-up that occurs with magnetic tape;
the dominant frequencies shift according to transport speed.
To change the Tape Speed value, click the IPS text values, or drag the knob,
or click the knob then use the mouse scroll wheel.
15 IPS is considered the favorite for rock and acoustic music due to its low fre-
quency “head bump” (low frequency rise) and warmer sound, while 30 IPS is
the norm for classical and jazz due to its lower noise floor, greater fidelity and
flatter response. 7.5 and 3.75 IPS are also available for an even more col-
ored experience, with even greater frequency shift and other artifacts.
Note: The available parameter ranges of Tape Type, Head Width, and Em-
phasis EQ are affected by Tape Speed. See Table 6 on page 43 for details.
Tape Type Tape Type selects the active tape stock formulation. Seven
Tape Types are modeled in the UAD Ampex ATR-102. To se-
lect the Tape Type, click the TAPE button to cycle through the
available types, or click directly on the Tape Type value label.
The active Tape Type is highlighted in yellow.
Each type has its own subtle sonic variation, distortion onset, and tape com-
pression characteristics. Generally speaking, the lower the Cal Level for each
formula, the higher the signal level required to reach saturation and distor-
tion.
To select the Cal Level, click the CAL button to cycle through the avail-
able levels, or click directly on the calibration value label. The active
Cal Level is highlighted in yellow. The default value is +6 dB.
Because Cal Level affects the operating levels in the plug-in, it can be used to
compensate for overly high (or low) levels at the input of the plug-in. For ex-
ample, if the input is too hot, lowering the Cal Level will reduce the signal level
without changing Record, which can affect the tape saturation characteristics.
Note: The noise floor is affected by the Cal Level when Noise Enable
(page 33) is active.
As tape formulas advanced, their output level increased, thus lowering rela-
tive noise floor. Under normal use, the machine would be calibrated to the
tape’s output level. However, sometimes the machine is under-calibrated to
leave more headroom for a broader sweet spot or to prevent electronics from
clipping. Therefore, one can “go traditional” and calibrate to the recom-
mended levels (Table 1), or select a non-corresponding calibration setting.
As an example, if 456 is the selected Tape Type and when Cal is set at +6
(6 dB higher than the NAB tape standard), the reference flux level is 355
nWb/m (nanoweber per meter) and is 10 dB below the point where THD
reaches 3% (referred to as the maximum operating level). Therefore, with a
1 kHz test tone at –12 dBFS sent to the plug-in, with Tape Type set to 456, Cal
set to +6, and Auto Cal enabled, output levels of the plug-in will match the in-
put level and fluxivity on the tape will be 355 nWb/m.
Tip: The UAD Ampex ATR-102 default presets bank offers a variety of preset
Tape Type, Tape Speed, CAL level, and EQ configurations that are commonly
used for the recording of specific genres.
Head Width This control specifies the active tape head model. Head Widths of
1/4,” 1/2,” or 1” can be selected.
To select the Head Width, click the HEAD button to cycle through the
available values, or click directly on the value label. The active Head
Width is highlighted in yellow.
Note: At tape speeds of 3.75” and 7.5” only the 1/4” head can be
used. At these speeds, the 1/2” and 1” heads cannot be selected.
Path Select The Path Select buttons specify which of the four possi-
ble signal paths is active in the Ampex ATR-102. The
active mode is indicated by an illuminated LED above
its associated button. The default value is Repro.
Sync
Sync mode models the sound of direct tape recording and playback via the
sync/record head, plus all corresponding machine electronics.
Sync mode is generally not used for playback due to its poorer frequency re-
sponse, but it is included for authenticity and creative purposes.
Repro
Repro mode models the sound of tape recording through the record head and
playback through the reproduction head, plus all corresponding machine
electronics.
Input
Input mode emulates the sound of the Ampex ATR-102 through the machine
electronics only, without tape sonics. This is the scenario when the machine is
in live monitoring mode but the tape transport is not running.
Thru is a processor bypass control. When Thru is enabled, all controls are in-
active, emulation processing is disabled, and DSP usage is reduced.
Thru behavior is similar to that of the OFF position in the POWER control
(page 26), except that the Meters are still active in Thru mode. In this state, the
Meters indicate signal levels at the input of the plug-in prior to processing.
Note: DSP usage is reduced only when DSP LoadLock is disabled. If DSP
LoadLock is enabled (the default setting), activating Thru will not reduce DSP
usage.
Note: Spinning reels automation is not supported in all hosts. In Sonar, the
plug-in must be configured as a “tempo-based effect” for reels animation.
Auto Cal The Ampex ATR-102 has individual calibration controls for ad-
justing sync (record) EQ, reproduction (playback) EQ, and
record bias, which are used to compensate for the inherent
non-linearities of tape systems. On the hardware, these controls
are typically adjusted to calibrate the system for optimum response compen-
sation due to tape non-linearities whenever the tape type, tape speed, empha-
sis EQ, or head width are changed.
When the Auto Cal (Automatic Calibration) ON button is clicked, the calibra-
tion EQ and bias controls are automatically adjusted to their “flat” calibrated
position for the currently active Tape Type, Tape Speed, Emphasis EQ, and
Head Type. The Auto Cal ON LED illuminates green when the calibration pa-
rameters (Shelf EQ, HF EQ, Repro HF, Repro LF, and Bias) are in their cali-
brated position.
Auto Cal is enabled by default. When Auto Cal is ON, the calibration pa-
rameters (Shelf EQ, HF EQ, Repro HF, Repro LF, and Bias) change values
whenever Tape Type, Tape Speed, Emphasis EQ, or Head Type is modified.
When Auto Cal is OFF, the calibration parameters do not change values
when Tape Type, Tape Speed, Emphasis EQ, or Head Type is modified.
Important: Any calibration settings made manually are lost when Auto Cal
is activated. Consider saving manual settings as a preset before activating
Auto Cal.
Tip: To return any of the individual calibration controls to their “flat” (cali-
brated) position, click the label text adjacent to the control (or, simply re-click
Auto Cal to return all calibration controls to their “flat” position).
Record EQ The Record EQ controls (HF EQ and Shelf EQ) are applied in
the tape recording circuit and affect tape saturation character-
istics. They compensate for common residual HF loss due to
bias optimization and system filtering, and affect HF content in
the signal prior to the tape non-linearity.
HF EQ
Shelf EQ
Repro EQ The Repro EQ controls (Repro HF and Repro LF) are post-head
controls for tape playback calibration. They affect the signal
coming out of the tape circuitry in both Repro and Sync
modes.
The Repro EQs are used as filters to shape the frequency response of the sys-
tem in maintaining a flat response and enable compensation for any tape fre-
quency loss or head wear.
Adjusts the tape playback high frequency content when Path Select is set to
Sync or Repro.
Repro LF
Adjusts the tape playback low frequency content when Path Select is set to
Sync or Repro.
Bias This control adjusts the amount of bias in the record signal.
Bias is defined as an oscillator beyond the audible range ap-
plied to the audio at the record head, allowing for adjustment
of the record behavior. Ideal bias voltage settings provide maximum record
sensitivity and low distortion. Intentionally overbiasing is a common technique
especially for “tape compression” which produces a warmer, gently satu-
rated sound. Underbiasing can also be used to add distortion and other non-
linear responses, similar to gate chatter or cold solder joints; extremely low
voltages may even cause audio to drop out entirely.
Bias voltage, HF/Shelf EQ, and Emphasis EQ (CCIR, NAB, AES) all work to-
gether to provide a linear response to the recorded signal. The “flat” (cali-
brated position) is determined by tape speed, tape type, emphasis EQ, and
head width.
Noise Enable This is a global enable control for the Hum and Hiss effect.
When Noise is ON, the level of Hum and Hiss can be indepen-
dently adjusted using the Hum and Hiss Level controls.
The default values of 0 dB for Hum and Hiss are the actual modeled level in
the original hardware. Noise is not affected by automatic calibration.
Hum Determines the amount of Hum in the signal. Hum is added after the
tape circuitry. This control affects both the left and right channels.
Noise Enable must be ON for the Hum control to function.
The default value of 0 dB for Hum is the actual modeled level in the original
hardware. This default value can be offset by ±25 dB.
The Hum frequency is dependent on the Emphasis EQ control (page 26). The
frequency is 60 Hz when set to NAB (US) and 50 Hz when set to CCIR (Eu-
ropean).
Hiss Hiss determines the amount of tape hiss in the tape playback signal.
The default value is 0 dB and can be offset by –25 dB to +50 dB for cre-
ative purposes. Noise Enable must be ON for this control to function.
Like the hardware, the amount of hiss is dependent on settings of the various
controls and may subtly change based on the values of Path Select, Tape
Type, Emphasis EQ, Cal Level, Bias, Playback EQs, and Output Level.
Hiss Level is not affected by automatic calibration, so its level does not change
with Tape Speed. When Hiss Level is at its default position (0 dB), the amount
of hiss present in the signal is as if the Tape Speed is 15 IPS. To emulate the
amount of hiss at the other tape speeds, enter the offsets from Table 2.
Wow & Flutter These buttons are global enable/disable controls for the Wow
Enable and Flutter effects. When Wow & Flutter is ON, the level of
Wow and Flutter can be independently adjusted using the
Wow and Flutter Level controls.
Wow and Flutter are “undesirable” pitch modulations induced by the me-
chanical components of the tape transport. Wow is a by-product of capstan
irregularities, while flutter is a by-product of tape stretching and sticking. Both
can be effectively used for creative purposes.
Note: Wow and Flutter levels change with Tape Speed, but they are not af-
fected by automatic calibration.
Wow Determines the amount of Wow in the signal. Wow & Flutter Enable
must be ON for this control to function.
Flutter Determines the amount of Flutter in the signal. Wow & Flutter Enable
must be ON for this control to function.
Crosstalk Enable These buttons are global enable/disable controls for the
Crosstalk Level (XTALK) parameter. When Crosstalk is ON, the
amount of Crosstalk can be adjusted using the Crosstalk Level
control.
Crosstalk is the amount of signal bleed between the left and right channels.
Crosstalk sonics can vary based upon the Tape Speed and Head Width pa-
rameters, however the amount of crosstalk does not vary with these settings.
Crosstalk Level
Transformer These ON/OFF buttons enable and disable the transformer cir-
Enable cuit of the Ampex ATR-102. For an overview of this feature, see
“Modeled Transformer” on page 21.
Tape Delay These parameters control the built-in Tape Delay, which
creates tape echo effects. For an overview of this feature,
see “Tape Delay” on page 21. The Tape Delay controls
are not available in the original hardware.
These buttons are global enable/disable controls for the Tape Delay effect.
When Tape Delay is ON, its red numerical display is active, and other Tape
Delay parameters can be adjusted.
Dry/Wet Mix
The Dry/Wet pushbuttons control the mix of the Tape Delay effect. The
amount of dry and wet signals are displayed as percentages.
Click the Dry button to increase the dry signal level by 1%, or the Wet button
to increase the delayed signal level by 1%.
Tip: Hold the Dry/Wet buttons down to rapidly change the mix values. For
fine control in increments/decrements of 0.1%, hold down Shift while chang-
ing values.
Delay Time
The left and right channel delay times can be independently adjusted with
these controls. Click the “+” or “–” buttons to change the delay times in incre-
ments of 10 milliseconds. The available range is 0 – 1000 milliseconds.
Tip: Hold the +/– buttons down to rapidly change the delay times. For fine
control in increments/decrements of 1ms, hold down Shift while changing
values.
Important: When the tape speed is changed, the current delay time is
changed to reflect the new “physical time” between the sync and repro heads
for the new tape speed, and previously set values are lost (see tip below).
Tip: To retain custom delay times when changing Tape Speed, hold Shift
when changing Tape Speed.
Note: The Manual Calibration Tools are operational only when Path Select
is set to Sync or Repro. Additionally, the tools may not operate in some hosts
unless audio is present on the track containing the plug-in and the transport is
running. Placing the plug-in on an aux, bus, or master output may eliminate
this host limitation.
This section describes the functions of the manual calibration tools. For instruc-
tions on how to use the tools to perform a manual system calibration, see the
“Manual Calibration Procedure” on page 39.
About MRL Alignment tapes are carefully recorded with accurate and consistent flux lev-
Alignment Tapes els and test tone frequencies. They are constant companions to all well-main-
tained professional tape machines. Different alignment tapes are required for
each tape speed, head width, equalization standard (CCIR/IEC or NAB),
and fluxivity level.
Alignment tapes are required for system calibration and adjustment so that
playback of previously-recorded session tapes will have correct and consis-
tent equalization and levels, regardless of when, or where, the session tape
was originally recorded.
After tape playback system EQ and levels are calibrated to match the
known-to-be-correct values of the alignment tape(s), the record-side alignment
is performed. The entire record/playback system will then have proper EQ
and gain structuring.
When set to –16 dB, –6 dB, or +4 dB, a generated sine wave test tone at the
frequency specified by the Tones buttons is sent to the input of the record cir-
cuitry. This mode emulates sending external test tones into the system. The
level of the test tone is set by the knob position and remains static regardless
of other parameter values.
When set to MRL, a test tone from the “alignment tape” is sent into the play-
back circuitry. The MRL frequency is also specified by the Tones buttons, but
the levels used are from the calibrated alignment tape. Therefore the MRL tone
levels are dependent on other tape parameter values.
Tones The Tones buttons set the frequency of the “external” test
tone generator and the MRL tape test tones. Tone fre-
quencies of 50 Hz, 100 Hz, 1 kHz, 2.5 kHz, 5 kHz, 10
kHz, 15 kHz, and 20 kHz are available.
Click a button to specify that frequency; the active frequency’s button is shad-
owed gray as if in the “down” position.
Distortion Meter The red numerical display, between the Manual Cal
knob and the Tones buttons, represents the amount (dis-
played as a percentage) of third harmonic distortion
present in each of the left and right channels. This feature can be useful for
custom calibration techniques.
When the Manual Cal knob is set to –16 dB, –6 dB, or +4 dB, the value rep-
resents third harmonic distortion in the tape playback circuit. Generally
speaking, increasing Record (input) will increase distortion while in this
mode, as tape saturation increases. If Bias is set very low, distortion may in-
crease at lower Cal Levels.
Note: When the Manual Cal knob is set to MRL, the Distortion Meter is inac-
tive (there is no distortion display in this mode).
The calibration procedure described here is the most commonly used tech-
nique, and is the (albeit simplified) method recommended by the Ampex Op-
eration and Service Manual.
Tip: When making manual calibration settings, consider disabling Auto Cal
so the manually calibrated values are not accidentally lost if any of the con-
trols that force automatic calibration (Tape Type, Tape Speed, Emphasis EQ,
and Head Width) are inadvertently modified.
Preparation • Reduce monitoring system volume to avoid loud sine wave Tones.
• Insert UAD Ampex ATR-102 on the DAW output bus (see note below).
• Set Path Select to Repro mode (Sync mode is not supported for manual cal).
• Set left and right Meter Input/Output switches to the “OUTPUT” position.
• Set left and right Meter Peak/VU switches to the “VU” position.
• Set Tape Speed, Tape Type, Cal Level, and Head Width to desired values.
• If Tape Speed is set to 3.75 IPS, set Cal Level to +3 dB.
• Disable Noise Enable (excessive Hiss may contribute to incorrect results).
• Do not change the above settings throughout the procedure.
• For related information, see the Manual Calibration Notes at the end of this
chapter.
Note: The Manual Calibration Tools are operational only when Path Select
is set to Sync or Repro. Additionally, the tools may not operate in some hosts
unless audio is present on the track containing the plug-in and the transport is
running. Placing the plug-in on an aux, bus, or master output may eliminate
this host limitation.
Repro Level 1. Set the Manual Cal Knob to the “MRL” position. The built-in alignment tape
Calibration tone will sound and its level can be viewed on the Meters.
Record Bias 8. Set the Manual Cal Knob to the tone level position in Table 3 below (the
Calibration tone level depends on tape speed).
9. Set the Tones frequency to the value in Table 3 below (the frequency de-
pends on tape speed).
10. Adjust Bias throughout its range until the Meters reach the maximum level
achievable with the Bias control.*
*If the meters reach their maximum “pinned” value, you may temporarily reduce the Reproduce
level to lower the meters, so the maximum achievable level can be accurately viewed (the maxi-
mum achievable level may be higher than the pinned value of 3 dB).
*When calibrating at 3.75 or 7.5 IPS, the tone generator is at a lower level, therefore meter resolu-
tion is decreased. To increase meter precision when adjusting bias at the lower tape speeds, con-
sider temporarily increasing the reproduce level.
Record EQ 14. Set the Tones frequency to the value in Table 5 below (the frequency de-
Calibration pends on tape speed).
For related information, see the Manual Calibration Notes in the next section.
Tip: For easy recall in future sessions, save unique calibrations as a preset.
Available Some ATR-102 parameter value ranges depend on the value of other param-
Settings eters. These dependencies are listed in Table 6 below.
Ampex ATR-102 The Ampex ATR-102 uses an internal upsampling technique to achieve sonic
Latency design goals. This upsampling results in a larger latency than most other UAD
plug-ins. See “Upsampled Plug-Ins” on page 550 for more information.
Introduction
The 550A and 560 modular EQs are some of the most popular and enduring
mixing and tracking processors ever made. The 500 series modules from API
are true industry standards, found in professional multi-channel consoles to
Lunchbox racks in the humblest of project studios. Designed by the now leg-
endary Saul Walker in the late 60s, the combination of Walker's 2520 op
amp and his Proportional Q circuitry gave the 550 and 560 an uncompli-
cated way to generate acoustically superior equalization.
Universal Audio now offers the UAD-2 platform true best-in-class emulations of
these two audio production staples. With UA’s industry-leading circuit model-
ing that captures the filter shapes, band interactions, and unique filter ampli-
fier clipping behaviors providing full “suspension of disbelief,” these plugins
fulfill sonic requirements that previously only the API hardware could provide.
Based on vintage units provided by Ross Hogarth and Capitol Studios, both
plug-ins provide era-specific features and behaviors, and a remarkable model
of API’s custom 2520 and output transformer — the results are fantastic low-
frequency transparency and tight imaging, which is that legendary API
“punch in your gut” sound. Like with the hardware, the EQs are extremely fast
to set, reliable and uniform, and deliver that one-of-a-kind API high headroom
precision.
If you want the sound of classic American music, you need the API EQs.
Figure 5. The API 550A EQ (left) and API 560 EQ (right) plug-in windows
API 500 Series The API 500 Series EQ Collection includes the UAD API 550A and UAD API
Collection 560 plug-ins, which are officially licensed from and endorsed by Automated
Processes Inc. Both plug-ins meticulously model the entire electronic path, in-
cluding custom API 2520 op-amps, transformers, band interactions, and in-
ternal clipped filter nonlinearities.
API 550A The API 550A provides reciprocal equalization at 15 points in five steps of
boost or cut to a maximum of ±12 dB of gain at each point. The fifteen fixed
equalization points are divided into three overlapping band ranges. The high
and low frequency bands are individually selectable to function as either
peaking or shelving filters. A bandpass filter may be inserted independently
of all other selected equalization settings.
API 560 The 10 precision EQ bands make the 560 ideal for signal sweetening and
mix tuning. The boost and cut characteristics are identical, allowing previous
actions to be undone if desired.
Proportional Q The 550A and 560 filters feature API’s “Proportional Q” which continuously
narrows the bandwidth of the filter as band gain is increased, providing (as
stated by API) “an uncomplicated way to generate acoustically superior
equalization.”
Artist Presets The API 500 Series EQ Collection includes artist presets from prominent API
users. The artist presets are in the internal factory bank and are accessed via
the host application’s preset menu. The artist presets are also copied to disk
by the UAD installer so they can be used within Apollo’s Console application.
The presets can be loaded using the Settings menu in the UAD Toolbar (see
“Using UAD Powered Plug-Ins” in Chapter 7 of the UAD System Manual).
API 500 Series These plug-ins use an internal upsampling technique to achieve sonic design
Latency goals. The upsampling results in a slightly larger latency than most other UAD
plug-ins. See “Upsampled Plug-Ins” on page 550 for more information.
Frequency
Gain
The gain for the band can be set using any of these three methods:
1. Drag the outer concentric knob handle to the desired value, or
2. Click the “+” or “–” text labels to increment/decrement values, or
3. Hover over the outer concentric knob then use the mouse scroll wheel, or
4. Clickdirectly on the gain value label to switch to that value (this method
works only when Controls Mode is set to “Circular” in the UAD Control
Panel Configuration panel).
Bell/Shelf The HF and LF bands are normally in bell mode. When the
Switches Bell/Shelf button is engaged for the band (in the darker
“down” position), the band is switched to shelving mode.
LF Shelf
When the LF Shelf button is engaged, the low frequency band is switched to
shelving mode.
HF Shelf
When the HF Shelf button is engaged, the high frequency band is switched to
shelving mode.
Tip: Click the “0” text label to return Output to the 0 dB position.
EQ In The EQ In switch enables the three band filters and the bandpass filter.
All filters are active when the switch is engaged and the “IN” LED is il-
luminated.
When disengaged, the filters are bypassed but other hardware cir-
cuitry is still modeled.
Power The plug-in is active when the POWER switch is engaged and its
associated LED is illuminated. When this switch is off, all plug-in
processing is disabled and UAD DSP usage is reduced (unless
UAD-2 LoadLock is enabled).
Gain Sliders Each of the 10 sliders controls the gain for one fre-
quency band. Each band can be adjusted to boost or cut
the frequency by up to ±12 dB. The available band fre-
quencies are listed in Table 8 below.
Tip: Click the “0” text label to return Output to the 0 dB position.
When disengaged, the EQ bands are bypassed but other hardware circuitry
is still modeled.
Power The plug-in is active when the POWER switch is engaged and its
associated LED is illuminated. When this switch is off, all plug-in
processing is disabled.
The 550A became API’s standard channel module EQ when the company be-
gan manufacturing consoles in 1971. As the industry rapidly embraced the
sonic quality of the 550A, it quickly found it's way into many custom console
designs by Frank DeMedio and other leading engineers. Many of these con-
soles are still in use today. Forty years later, the 550A remains the standard
against which other EQs are measured, and it has played a major role in the
recording industry for decades. With virtually all existing units spoken for,
popular demand for this EQ resulted in API finally resuming production in
2004.
Introduction
The API Vision Channel Strip plug-in for the UAD platform is based on API’s
flagship console found in studios and sound stages across the globe. The
plug-in includes five indispensable modern production API modules available
in the Vision console: The custom 2520 op-amp based 212L Preamp, 215L
Sweep Filters, 550L EQ, 225L Compressor/Limiter, and the 235L Gate/Ex-
pander.
The tone of the 212L mic preamp has its roots in the classic API 2488 series
all-discrete recording consoles, best known for the famed “LA” sound. The API
212L incorporates the API 2520 op-amp and the same circuit as the legend-
ary API console input modules dating from the 1970s. This mic preamp artic-
ulates high frequencies with great detail, while delivering the big sounding,
warm bottom end that API is famous for.
With identical features as the modern API 550B EQ, the API 550L (L for
“long” frame) is a continuation of the 550A EQs that have played a major
role in the history of record making, but with an additional filter band and sev-
eral new frequencies. The 550L artfully blends the past with the present, and
is only available in modern API consoles. Making use of API's “Proportional
Q” innovation, the 550L intuitively widens the filter bandwidth at minimal set-
tings and narrows it at higher settings without the need for additional band-
width controls.
Ideal for almost any application, the widely versatile API 225L Compressor's
auto-output level remains at unity regardless of the threshold or ratio settings.
This feature allows for real-time adjustments without the need for changing the
output level. Both New (“feed-forward”) and Old (“feed-back”) methods are
selectable via the front panel, providing two choices of gain reduction. Soft
provides a more subtle compression resulting in a natural sound, while Hard
results in a sharp knee type with a severe limiting effect.
The API 215L is a unique passive, sweepable cut filter, designed specifically
to contour the sound in a way that preserves the natural tone of the signal. The
215L is a low pass filter with a slope of 6 dB per octave, and a high pass filter
with a slope of 12 dB per octave. The filters are isolated from each other with
the same discrete transistor buffer used in the famous 550 series equalizers.
Signal Flow A simplified view of the default signal flow routing within the plug-in is illus-
trated in the diagram below. The audio path is shown with solid lines, and the
side chain control keys for the dynamics modules are shown with dotted lines.
Figure 7. Simplified default signal flow within the API Vision Channel Strip
The signal flow can be re-routed via options in the plug-in. The 550L EQ can
be placed before the dynamics modules via the PREDYN (pre-dynamics) but-
ton, and the 215L and/or 550L modules can be moved out of the audio path
and into the dynamics side chain path via the SC (side chain) buttons in those
modules.
Note that the side chains for the dynamics modules are in series by default (as
in diagram above). However, when the 215L and/or 550L are moved into
the side chain (via the SC buttons), the side chain inputs for the dynamics
modules are in parallel, as shown in the diagram below.
Figure 8. Simplified signal flow illustrating parallel side chain inputs with 215L SC enabled
Artist Presets The API Vision Channel Strip includes artist presets from prominent API users.
The artist presets are in the internal factory bank and are accessed via the
host application’s preset menu. The artist presets are also placed by the UAD
installer so they can be used within Apollo’s Console application. The presets
can be loaded using the Settings menu in the UAD Toolbar (see “Using UAD
Powered Plug-Ins” in Chapter 7 of the UAD System Manual).
This plug-in includes additional artist presets that are not available in the in-
ternal factory bank. These additional presets can also be accessed using the
Settings menu in the UAD Toolbar.
Unison™ The API Vision Channel Strip features Unison mic preamp technol-
Integration ogy integration with the mic preamp hardware in Universal Audio’s
Apollo audio interfaces. With Unison, Apollo’s ultra-transparent mic
preamps inherit all of the unique sonics, input characteristics, and features of
the API Vision 212L hardware preamp module.
Note: Unison is active only when the plug-ins are inserted in the unique IN-
PUT insert within Apollo’s Console application. For complete Unison details,
see the Apollo Software Manual.
All Apollo mic preamps feature input impedance switching in analog hard-
ware that can be physically switched by Unison plug-ins for physical, micro-
phone-to-preamp resistive interaction. This impedance switching enables
Apollo’s preamps to physically match the emulated unit’s input impedance,
which can significantly impact the sound of a microphone. Because the elec-
trical loading occurs on input, prior to A/D conversion, the realism is faithful
to the original target hardware preamp.
Apollo’s front panel preamp knob can independently adjust the gain and
level parameters available within the Unison plug-in via Gain Stage Mode.
The gain stage being adjusted can be remotely switched via Apollo, so the
gain levels and their associated colorations can be tuned from the hardware
knob for precise physical tactile control, all without using the Unison plug-in’s
software interface.
API Vision These plug-ins use an internal upsampling technique to achieve sonic design
Channel Strip goals. The upsampling results in a slightly larger latency (55 samples; 88
Latency
samples at 176.4 and 192 kHz) than most other UAD plug-ins. See “Upsam-
pled Plug-Ins” on page 550 for more information.
212L Pad
Note: The 212L Pad is available for both the mic and
line inputs.
212L Meter
The Meter indicates the signal level at the output of the 212L preamp module.
212L Phase
The Phase (ø) button inverts the polarity of the signal. The polarity is inverted
when the green indicator is lit. Leave the button off (unlit) for normal polarity.
Unison Impedance
When API Vision Channel Strip is used in an INPUT insert within the
Apollo Console application, the hardware input impedance of the
Apollo mic preamp is switched to 1.5k Ω (the value of the 212L
hardware module) for physical, microphone-to-preamp resistive interaction.
215L Lo-Pass
215L Hi-Pass
This button enables the side chain function for the 215L Sweep Filters. When
the 215L side chain is active, signal output from the 215L module is removed
from the audio path, and is instead routed to control the 235L and 225L dy-
namics modules in parallel as shown in the diagram below.
To listen to the side chain key, simply disengage SC to hear the equalized sig-
nal.
Note: The 215L module must be enabled for the 215L side chain to function.
215L On
This button enables the 215L module. The module is active when the button’s
green indicator is lit.
Note: UAD DSP load is reduced when this module is inactive (unless DSP
LoadLock is enabled).
235L Threshold
235L Depth
Depth controls the difference in gain between the gated/expanded and non-
gated/expanded signal. Higher values increase the attenuation of signals be-
low the threshold. When set to zero, no gating or expansion occurs. The
available range is 0 dB to -80 dB. The default value is -80dB.
Scaled Control
Although the Depth control has a full range of -80 dB, the scale is expanded
in the first half of rotation so 0 to -9 dB is available for fine tuning of subtle,
undetectable gating. The second half of rotation is from -10 to -80 dB for more
drastic noise reduction.
235L Attack
The function of Release/Hold knob (R/H) depends on the setting of the Re-
lease/Hold switch (Rel/Hld). With both switch settings, the available range of
the knob is 50 milliseconds to 3 seconds. The default value is 0.5 seconds.
Note: Hold mode is only available when the 235L module is set to Gate
mode with the Gate/Expander switch.
When the input signal drops below the threshold level and the Release/Hold
switch is set to Release, this knob sets the amount of time it takes for signals
to decay to the Depth level.
Slower release times can smooth the transition that occurs when the signal
dips below the threshold, which is especially useful for material with frequent
peaks.
Fast release times are typically only suitable for certain types of percussion
and other instruments with very fast decays. Using fast settings on other
sources may produce undesirable results.
Hold
When the input signal drops below the threshold level and the Release/Hold
switch is set to Hold, this knob sets the amount of time that signals are held at
normal levels before signals return to the Depth level.
Note: When set to Hold, the release time is fixed at 100 milliseconds.
Note: This switch is locked in the Release position when the module is in
Gate mode (Hold mode is unavailable in Expander mode).
This switch (GTE/EXP) toggles the module between Gate and Expander
modes. The default value is Expander.
GTE
When set to Gate mode, signals below the threshold are attenuated by the
Depth amount.
EXP
235L Meter
235L On
This button enables the 235L module. The module is active when the button’s
green indicator is lit.
Note: UAD DSP load is reduced when this module is inactive (unless DSP
LoadLock is enabled).
225L Threshold
Ratio defines the amount of gain reduction applied to signals above the
threshold. For example, a value of 2 (expressed as a 2:1 ratio) reduces the
signal level above the threshold by half, with an input signal level of 20 dB be-
ing reduced to 10 dB.
225L Attack
225L Release
Release sets the amount of time it takes for processing to cease once the input
signal drops below the threshold level. The available control range is 50 mil-
liseconds to 3 seconds.
Slower release times can smooth the transition that occurs when the signal
dips below the threshold, which is especially useful for material with frequent
peaks. However, if the release is too long, compression for sections of audio
with loud signals may extend to sections of audio with lower signals.
Fast release times are typically only suitable for certain types of percussion
and other instruments with very fast decays. Using fast settings on other
sources may produce undesirable results.
225L Knee
Soft provides a more subtle compression resulting in a very natural, less com-
pressed sound. Hard results in a more typical, sharp knee type compression
that has a more severe limiting effect.
The Type control switches the 225L compressor’s control side chain
signal to use either a feed-back (OLD) or feed-forward (NEW) de-
sign, providing two types of gain reduction. The default value is
Old.
Compressors typically have a side chain control signal based on either feed-
back or feed-forward designs. NEW feed-forward gain reduction is typical of
newer VCA type compressors that rely on RMS detectors for the side chain cir-
cuit. The OLD feed-back method is what most classic compressors use for the
side chain circuit.
Note: Unlike the original hardware, side chain processing via the 215L and
550L modules can be performed with this switch in the OLD position (the
hardware cannot use side chain filtering with feedback compression).
225L Meter
225L On
This button enables the 225L module. The module is active when the button’s
green indicator is lit.
Note: UAD DSP load is reduced when this module is inactive (unless DSP
LoadLock is enabled).
Band Controls
Frequency
The gain for the band can be set using any of these four methods:
• Drag the outer concentric knob handle to the desired value
• Click the “+” or “-” text labels to increment/decrement values
• Hover over the outer concentric knob then use the mouse scroll wheel
• Click directly on the gain value label to switch to that value (this method
works only when Controls Mode is set to “Circular” in the Configuration
panel of the UAD Meter & Control Panel application)
Peak/Shelf Switches
550L Pre-Dynamics
When550L PREDYN is active, the dynamics side chain is always tapped after
the 550L module, regardless of the state of the 215L module’s SC function.
Figure 10. PREDYN routes the 550L before the dynamics modules
This control enables the side chain function for the 550L EQ. When
the 550L side chain is active, signal output from the 550L module is
removed from the audio path, and is instead routed to control the 235L and
225L dynamics modules. The default value is Off.
Note: Both the 550L and 215L modules can both be routed simultaneously
to the dynamics side chain. In this case, the 215L precedes the 550L in the
side chain path, as shown below.
Figure 13. Signal flow with SC enabled in both 215L and 550L modules
Note: UAD DSP load is reduced when this module is inactive (unless DSP
LoadLock is enabled).
Output
The plug-in is active when the POWER switch is engaged and its associated
LED is lit. When this button is off, all plug-in processing is disabled and UAD
DSP usage is reduced (unless DSP LoadLock is enabled).
Historical Background
API (Automated Processes Inc.) was formed in 1968 with Saul Walker and
Lou Lindauer. API is perhaps most noted for their modular approach to equip-
ment manufacturing and for their now legendary 2520 amplifier. To this day,
the extraordinary headroom made possible with the 2520 offers consistent
analog performance even when using radical EQ curves. API quickly became
the leading audio broadcast console manufacturer for radio and television
networks and high profile stations. Soon after, recording studios both large
and small began using API. The API brand and the company’s commitment to
excellent audio design endures to this day.
Bermuda Triangle
Inspired by the hallowed early ’70s “triangle” version of the Big Muff, the Ber-
muda Triangle plug-in delivers the same bad-ass attitude and fiendish fuzz
that has graced classic records and many-a-legend’s pedalboard for over
four decades.
The Rise of the Throughout the ’70s, the Big Muff found its way onto classic tracks such as the
Muff Isley Brothers’ “Who’s That Lady (Part 1),” and the Carpenters’ “Goodbye to
Love” — featuring a raging Big Muff plugged directly into the board!
Pink Floyd’s David Gilmour began using a Big Muff with 1976’s Animals,
eventually using the pedal to conjure the beautifully lyrical sustain on The
Wall’s “Comfortably Numb.” Sonic mavericks like Adrian Belew relied on the
Muff to elicit beastly howls from a Stratocaster, and in the ’90s, Smashing
Bermuda Triangle is not affiliated with, sponsored nor endorsed by any companies currently us-
ing the Electro-Harmonix Big Muff name. The Bermuda Triangle name is used solely to identify
the classic effect emulated by Universal Audio’s product.
A Faithful Fuzz The Bermuda Triangle plug-in expertly captures the original Big Muff’s huge
Emulation sounding bass response and rich-yet-raspy character. Its simple Volume,
Tone, Sustain control set allows you to easily and intuitively dial-in single-coil
or humbucker-equipped guitars.
Triangle Tones Whether it’s violin-like sustain for lead lines, or bursts of punishing low-string
riffs, the Bermuda Triangle plug-in is voiced to deliver the fuzzy goods just like
the original vintage unit. From heavily saturated to colorfully clipped, the Ber-
muda Triangle reacts like the hardware to your touch and picking attack for
a bountiful range of distorted delights.
Unison The interaction of your instrument and the first pedal in your signal chain is an
Technology - Key essential ingredient to capturing a stompbox's unique character and tone.
to Tone, Touch,
and Feel Thanks to Universal Audio's Unison technology, your guitar gets the same cir-
cuit interaction, gain range, and clip points of a vintage Big Muff when you
plug in to an Apollo Twin, DUO, or QUAD. This gives you the true tone, feel,
and response of the original hardware.
Not Just for The Bermuda Triangle's signature voice can also be unleashed on bass,
Guitar drums, vocals – or anything else. Blowout a drum bus with ridiculous amounts
of distortion or add grit and edge to a vocal or synth. And by nailing the orig-
inal hardware's beefy low-end response, the Bermuda Triangle is an ideal
fuzz/distortion tool for bass guitar.
Standard DAW In much the same way as some premier recording and mix engineers use
Inserts stomp boxes in a mix, Bermuda Triangle can be used for creative purposes on
any source signal by placing it in any plug-in insert within a DAW. For typical
guitar tones, follow the pedal with a guitar amp emulation (as one would with
a hardware guitar pedal and amp).
Note: Since Hi-Z devices typically operate at much lower signal levels than
line-level devices, signal levels being routed into the pedal may need to be re-
duced to avoid undesirable input distortion.
For the most authentic stompbox tones, plug any high-impedance instrument
(guitar, bass, etc.) into Apollo’s Hi-Z instrument input and place the pedal
plug-in into the unique Unison INPUT insert on the same channel within
Apollo’s Console application. If desired, follow the Unison pedal plug-in with
another pedal or guitar amp emulation in Console’s standard insert slots.
This Hi-Z workflow enables near-zero latency monitoring or recording with the
same input characteristics and dynamic response as the original pedal.
Note: This plug-in can be Unison-enabled with Apollo’s Mic or Line inputs.
However, because the original hardware has a high-impedance instrument
input only, Apollo’s Hi-Z input and Unison insert will provide the most accu-
rate sound and experience of the hardware pedal that is modeled.
Important: Unison is active only when the pedal plug-in is placed in the
unique INPUT insert available on Hi-Z inputs within Apollo’s Console applica-
tion. For complete Unison details, see the Apollo Software Manual.
Apollo’s front panel preamp knob can independently adjust the Volume, Sus-
tain, and Output controls available within the Unison pedal plug-in via Gain
Stage Mode. The control being adjusted can be remotely switched via
Apollo, so the control levels and their associated colorations can be tuned
from the hardware knob for precise physical tactile control, all without using
the Unison plug-in’s software interface.
Sustain Sustain varies the amount of signal overdrive. Rotate the control
clockwise to increase distortion and sustain.
Volume Volume adjusts the pedal’s modeled output level. Rotate the
control clockwise to increase the volume.
Tone Tone adjusts the high-frequency content of the signal. Rotate the
control clockwise to increase the filter amount, which reduces
treble content.
Power The stomp switch toggles between plug-in enable and disable.
Click the switch to toggle the Power state.
Output Output controls the clean (unmodeled) gain at the output of the
plug-in. The available range is -24 dB to +12 dB.
Tip: Click the “0” label to return the control to zero dB.
Cambridge EQ
Overview
The UAD Cambridge EQ plug-in is a mastering-quality, no-compromise equal-
izer that enables powerful tonal shaping of any audio source. Its algorithm
was modeled from various high-end analog filters, providing a sonically rich
foundation for timbral manipulation. Special attention was given to the han-
dling of higher frequencies, resulting in a much smoother and more satisfying
high-end response than is found in most digital filters.
Cambridge EQ Screenshot
Response Curve The Response Curve Display plots the frequency response of the current Cam-
Display bridge EQ settings. It provides instant visual feedback of how audio is being
processed by the equalizer.
The entire audio spectrum from 20 Hz to 20 kHz is displayed along the hor-
izontal axis. Gain and attenuation of frequencies (up to ±40 dB) are dis-
played along the vertical axis. The vertical resolution of this display can be
modified with the Zoom buttons.
The color of the response curve depends on the value of the A/B Selector con-
trol. When A is active, the curve is yellow. When B is active, the curve is
green (see “A/B Selector Button” on page 77). When Cambridge EQ is dis-
abled, the response curve is grey.
Figure 17. Vertical resolution of the Response Curve can be changed with the Zoom buttons
Curve Control There are five control “bats” on the curve display. Each bat is color coded
Bats and corresponds to each of the five EQ bands. The position of the bat on the
curve display reflects the frequency and gain of its corresponding band, even
if the band is disabled.
Figure 18. The Curve Control Bats can be used to control EQ band frequency, gain, and Q
Note: To modify the Q of a band with its bat, hold down the Control key while
dragging vertically.
When a band is enabled, the EQ curve usually touches the bat. However, be-
cause the EQ curve always displays the actual frequency response of Cam-
bridge EQ, if two bands are close together in frequency and/or at extreme
gain values, the bat may not touch the curve itself.
A/B Selector The A/B Selector switches between two separate sets of Cam-
Button bridge EQ plug-in values. This feature enables easy switching
between two completely independent EQ curves which can be
useful for comparison purposes or for automating radical tim-
bre changes. Both the A and B curves reside within a single
Cambridge EQ preset.
Click the A/B Selector button to switch between the two curves. When A is
displayed, the button and the EQ response curve is yellow. When B is dis-
played, the button and the curve is green.
Note: To reset the A or B curve to a null (flat) response, control-click the A/B
Selector button. The active curve will be nulled.
Note: To copy one curve to another, shift-click the button. The active curve will
be copied to the inactive curve.
Cut Type Menu The Cut Type menu determines the sound of the low
and high cut filters. To view the Cut Type menu, click
and hold the green cut type button.
Note:UAD DSP usage does increase some as the filters get stronger (unless
UAD-2 DSP LoadLock is enabled).
Cut Enable This button activates the cut filters. The filters are enabled when the “In” button
Button is green. UAD DSP usage is slightly reduced when the cut filters are disabled
(unless UAD-2 DSP LoadLock is enabled).
EQ Bands
All five of the EQ bands can be used in parametric or shelf mode. Each band
has identical controls, the only difference is the frequency range values.
The function of the controls is similar in both parametric and shelf modes. The
two modes are described separately (see “Parametric EQ” on page 80 and
“Shelf EQ” on page 83).
Enable Button Each band can be individually engaged with the Enable button. The button is
green when the band is enabled. All bands default to disabled. To enable
any band, click the Enable button.
You can use these buttons to compare the band settings to that of the original
signal, or to bypass the individual band. UAD DSP usage is slightly de-
creased when a band is disabled (unless UAD-2 DSP LoadLock is enabled).
Frequency Knob This parameter determines the center frequency to be boosted or attenuated
by the Gain setting. The available range for each of the five bands is the same
for both parametric and shelf modes. The ranges are shown in Table 10 on
page 80.
Note:When operating at sample rates less than 44.1 kHz, the maximum fre-
quency will be limited.
Gain Knob This parameter determines the amount by which the frequency setting for the
band is boosted or attenuated. The available range is ±20 dB.
Q (Bandwidth) The behavior of the Q parameter varies depending on the band mode and
Knob the gain. For this reason Q is detailed separately in the parametric and shelf
mode sections (see “Parametric Q” on page 80 and “Shelf Q” on page 83).
Parametric EQ
A band is in parametric mode when shelf mode is disabled (see “Shelf Enable
Button” on page 83). Three types of parametric EQ are available, as deter-
mined by the Parametric Type selector.
Parametric Type The Parametric Type selector changes the response of the band
Selector controls to reflect the behavior of various analog equalizers. It is
a global control for all 5 bands, and has no effect on the low
and high cut filters. Click the Parametric Type display to rotate between Types
I, II, and III.
The filter algorithm is the same in all three parametric types. The difference is
in the dependency between the gain and Q parameters. Each parametric
type has its own response characteristics.
In Type I mode, the Q remains constant regardless of the gain setting. In Type
II mode, the Q increases as gain is boosted, but remains constant as gain is
attenuated. In Type III mode, the Q increases as gain is boosted and attenu-
ated. See Figure 20, Figure 21, and Figure 22.
Parametric Q The Q (bandwidth) knob sets the proportion of frequencies surrounding the
center frequency to be affected by the gain control. The Q range is 0.25–16;
higher values yield sharper slopes.
Type I When set to Type I, the bandwidth remains at a fixed Q regardless of the gain
setting for the band; there is no Q/Gain interdependency. In addition, there
is a finer resolution of the Q knob in the middle of its range. This makes it eas-
ier to achieve subtle bandwidth changes. Note that the Q value and knob po-
sitions do not change as the gain is modified. See Figure 20.
Type II When set to Type II, there is a Q/Gain dependency on boost. The bandwidth
increases continuously as the gain is boosted, but not when attenuated. The
Q knob position determines the maximum Q at full gain.
Type III When set to Type III, there is a Q/Gain dependency on boost and attenua-
tion. The bandwidth increases continuously as the gain is boosted and atten-
uated. The Q knob position determines the maximum Q at full gain.
Note that the Q value increases as gain is increased but the knob position
does not change The Q value is approached as gain increases, and reaches
the knob position at maximum gain. See Figure 22.
Shelf Enable Each band can be switched from parametric mode to shelf
Button mode by clicking the shelf enable button. The button is off
by default. To enable shelving on any band, click the shelf
button.
Shelf Type When a band is in shelf mode and its Q is above the min-
Button imum value, a resonant peak occurs in the filter response.
The Shelf Type button affects where this resonant peak oc-
curs in relation to the shelf frequency.
The Shelf Type button places the resonant peak at (A) the edge of the stop-
band (Figure 23 on page 84), (B) the edge of the passband (Figure 24), or
(C) at the edge of the stopband and the passband (Figure 25).
Shelf Q When a band is in shelf mode, the Q knob sets the resonance of the band.
The range of the Q knob is 0-100% when in shelf mode.
Note: When a band is in shelf mode, the Gain setting will affect the Q of the
band.
When the Q is at its minimum value, there is no resonant peak. The resonance
increases and becomes more prominent as the Q is increased. Therefore, for
the shelf type to have any effect the Q must be above its minimum value.
Note: In
order for this button to have any affect, the band must be in shelving
mode, some gain must be applied, and the Q must be above its minimum
value.
Shelf Mode
Indicator Line
Figure 24. Shelf Type B
The Cooper Time Cube MkII has all the sound of the original delay system de-
sign and offers all the necessary features expected from a modern delay de-
vice. The distinct sound of the single or double hose Coil is preserved regard-
less of delay setting, and either sound is available at the flick of a switch. The
Cooper time Cube MkII also incorporates other enhanced tone shifting fea-
tures such as the Color switch that presents the user with the original (A) or
“leveled” (B) frequency response, plus tone controls and a 2-Pole High Pass
Filter. Lastly, a switch is presented for soloing the Wet signal, and the Send
switch disables the signal being sent into the delay processor.
The coils for each channel are at fixed but different lengths, which define the
available single delay times of 16ms for channel A and 14ms for channel B.
The two channels can be cascaded in series via external routing, for a total
available delay time of 30ms at reasonable fidelity for its era, which (accord-
ing to the original product brochure) “brings complete respectability to the
heretofore marginally feasible acoustical delay line.”
The UAD Cooper Time Cube plug-in has all the vibe of the original, with mod-
ern feature enhancements. It is a true stereo plug-in with two independent de-
lay processors. Each channel has its own set of controls, and there are global
controls that affect the plug-in overall.
Global Controls The global controls affect both channels of the processor simultaneously.
Figure 27. The global controls (Wet Solo and Power, also global controls, are not shown here)
Gain Gain controls the signal input level to the plug-in for both A (left) and B (right)
channels. Gain affects the combined wet and dry signals.
The available range is ±15 dB and the 12 o'clock position is unity gain.
Turn the knob clockwise to reduce low frequencies into the delay processors.
Full processor bandwidth is obtained with the knob in the fully counter-clock-
wise position.
Echo A/B These two “windows” display the current delay times of channels A and B.
Displayed values are defined by the Delay parameter (“Delay A/B” on
page 89). Delay values can be entered here directly using the text entry
method.
When Sync mode is off, delay times are expressed in milliseconds. When
Sync is on, delay times are expressed as a fractional bar value.
When the beat value is out of range, the value is displayed in parentheses.
This occurs in Sync mode when the time of the note value exceeds 2500ms
(as defined by the current tempo of the host application).
Sync This switch engages Sync mode for both channels of the plug-in. In Sync
mode, delay times are synchronized to (and therefore dependent upon) the
master tempo of the host application. When Sync is toggled, parameter units
are converted between milliseconds and beats to the closest matching value.
See “Tempo Sync” in Chapter 8 of the UAD System Manual for detailed in-
formation about tempo synchronization.
Send Send determines whether or not signals are sent into the delay processors.
When Send is ON, the input signals are delayed. When OFF, the delay in-
puts are muted.
Coils When both coiled tubes of the original hardware are cascaded to increase
the available delay time (when both channels are serially connected), the son-
ics are slightly different than when only one coil is used. The Coils switch tog-
gles between these two sounds available on the hardware, regardless of the
Delay value.
Unlike the other parameters, the A and B labels for Color are for reference
only. They do not represent the left and right channels.
Note: Color can be subtle, and its affect can vary depending on the value of
Coils and/or Decay.
Treble Treble controls the high frequency response in the delayed portion of the sig-
nals. It does not affect the dry signal. Treble is a cut/boost control; it has no
effect when in the 12 o’clock position.
Bass Bass controls the low frequency response in the delayed portion of the sig-
nals. It does not affect the dry signal. Bass is a cut/boost control; it has no ef-
fect when in the 12 o’clock position.
Wet Solo The Wet Solo switch puts the Cooper Time Cube into “100% Wet”
mode. When Wet Solo is on (in the “up” position), it mutes the dry un-
processed signal.
Wet Solo is optimal when the plug-in is used on an effect group/bus that is
configured for use with channel sends. When the plug-in is used on a channel
insert, this control should be deactivated.
Note: Wet Solo is a global (per plug-in instance) control. Its value is saved
within the host project/session file, but not within individual preset files.
Power The Power switch determines whether the plug-in is active. It's useful for com-
paring the processed sound to the original signal.
Meter The VU Meter provides a visual indication of the output level of the plug-in (the
meter is not calibrated). The meter needle drops to minimum when the plug-in
is disabled with the Power switch.
Delay A/B Delay controls the delay time for each channel of the processor. The selected
value is shown in the Echo display (“Echo A/B” on page 87).
The available delay range for each channel is 5 milliseconds to 2.5 seconds
(2500ms). When Sync is active, beat values from 1/64 to 3/1 can be se-
lected.
When the beat value is out of range, the value is displayed in parenthesis.
This occurs in Sync mode when the time of the note value exceeds 2500ms
(as defined by the current tempo of the host application). See “Temp Sync” in
Chapter 8 of the UAD System Manual for detailed information about tempo
synchronization.
Tip: Click the knob then use the computer keyboard arrow keys to incre-
ment/decrement beat values in Sync mode.
Decay A/B Decay sets the amount of processed signal fed back into its input (feedback).
At the minimum value, one delayed repeat is heard. Higher values (clockwise)
increase the number of repeats and intensity of the processed signal, with
“near infinite” repeats available at the maximum setting.
Pan A/B Pan sets the position of the delayed (wet) signal in the stereo field; it does not
affect the unprocessed (dry) signal.
Tip: Click the “PAN” label text to return the control to center.
Tip: Click the “ECHO VOL” label text to mute/unmute the delayed output.
Figure 29. The original Cooper Time Cube hardware front panel
Figure 30. The opened acoustic module and the complete system
Overview
The CS-1 Channel Strip provides the EX-1 Equalizer and Compressor, DM-1
Delay Modulator, and RS-1 Reflection Engine combined into one plug-in. In-
dividual effects in the CS-1 Channel Strip can be bypassed when not in use
to preserve UAD DSP use.
The CS-1 effects can also be accessed individually by using the individual
plug-ins. This is useful if you want to use the plug-ins in a different order, or if
you want to use multiple instances of the same plug-in (such as a flange routed
to a ping-pong delay with the DM-1 plug-in).
Band Disable Each band can be individually deactivated with the Band Disable button. All
Button bands default to enabled (brighter blue). To disable any band, click the Dis-
able button. The button is darker blue when the band is disabled.
You can use these buttons to compare the band settings to that of the original
signal, or to bypass the individual band.
Frequency (fc) Determines the center frequency to be boosted or attenuated by the Gain set-
Knob ting. The available range is 20 Hertz to 20 kiloHertz. When operating at
sample rates less than 44.1kHz, the maximum frequency will be limited.
Bandwidth (Q) Sets the proportion of frequencies surrounding the center frequency to be af-
Knob fected. The Bandwidth range is 0.03–32; higher values yield sharper bands.
In either of the first two bands, when the Bandwidth value is at minimum the
band becomes a low-shelf filter, and at maximum the band becomes a high-
pass filter.
Similarly, in either of the last two bands, when the Bandwidth value is at min-
imum the band becomes a high-shelf filter, and at maximum the band be-
comes a low-pass filter.
Enable/Bypass Globally enables or disables all bands of the Equalizer. You can use this
Switch switch to compare the EQ settings to the original signal or bypass the entire
EQ section to reduce UAD DSP load (unless UAD-2 DSP LoadLock is enabled).
Output Knob Adjusts the signal output level of the plug-in. This may be necessary if the sig-
nal is dramatically boosted or reduced by the EQ and/or compressor set-
tings.
Attack Knob Sets the amount of time that must elapse, once the input signal reaches the
Threshold level, before compression will occur. The faster the Attack, the more
rapidly compression is applied to signals above the Threshold. The range is
0.05 milliseconds to 100.00 milliseconds.
Release Knob Sets the amount of time it takes for compression to cease once the input signal
drops below the Threshold level. Slower release times can smooth the transi-
tion that occurs when the signal dips below the threshold, especially useful for
material with frequent peaks. However, if you set too large of a Release time,
compression for sections of audio with loud signals may extend to lengthy sec-
tions of audio with lower signals. The range is 25 milliseconds to 2500 milli-
seconds (2.5 seconds).
Threshold Knob Sets the threshold level for the compression. Any signals that exceed this level
are compressed. Signals below the level are unaffected. A Threshold of 0 dB
yields no compression. The range is 0 dB to –60 dB.
Meter Pop-up Determines whether the VU Meter monitors the Input Level, Output Level, Gain
Menu Reduction, or Meter Off. Click the menu above the meter display to select a
different metering function.
Enable/Bypass Enables or disables the Compressor.You can use this switch to compare the
Switch compressor settings to that of the original signal or bypass the entire compres-
sor section to reduce UAD DSP load (unless UAD-2 DSP LoadLock is enabled).
EX-1M Overview
The EX-1M is a monophonic version of EX-1 that enables independent left and
right EQ settings in master effects chains and allows Logic Audio users to con-
serve UAD DSP resources.
EX-1M requires half the processing power compared to that of EX-1 when
used on a mono audio track within Logic Audio. Therefore, EX-1M should be
used on monophonic audio tracks within Logic whenever possible to conserve
UAD resources.
The DM-1 Delay Modulator provides stereo effects for delay, chorus, and
flange.
DM-1 Controls
Sync Button This button puts the plug-in into Tempo Sync mode. See Chapter 8 in the UAD
System Manual for more information.
L-Delay Knob Sets the delay time between the original signal and the delayed signal for the
left channel. When the Mode is set to one of the delay settings, the maximum
delay is 300 msec. When the Mode is set to one of the chorus or flange set-
tings, the maximum delay is 125 msec.
R-Delay Knob Sets the delay time between the original signal and the delayed signal for the
right channel. When the Mode is set to one of the delay settings, the maxi-
mum delay is 300 msec. When the Mode is set to one of the chorus or flange
settings, the maximum delay is 125 msec.
In the flanger modes, the L and R delay controls have slightly different func-
tions than when in the chorus modes. The high peak of the flanger is con-
trolled by the settings of the L and R delay controls. The low Peak of the flanger
is determined by the setting of the Depth control.
When delay times longer than 300ms are desired, use the DM-1L plug-in in-
stead. DM-1L has a maximum time of 2400ms per channel.
In Chorus 180 mode, both oscillators (the modulating signals) are180 de-
grees out of phase (inverted).
In Ping Pong delay mode, you will only get a ping-pong effect if you have a
mono source feeding the DM-1 on a stereo group track or send effect. On a
mono disk track, it works exactly like Dual Delay.
Rate Knob Sets the modulation rate for the delayed signal, expressed in Hertz.
Depth Knob Sets the modulation depth for the delayed signal, expressed as a percentage.
In Dual Delay and Ping Pong Delay modes, adjusting the Depth and Rate con-
trols can offer some very otherworldly sounds.
LFO Type Pop-up Determines the LFO (low frequency oscillator) waveshape and phase used to
Menu modulate the delayed signal. The waveshape can be set to triangle or sine,
each with a phase value of 0, 90, or 180-degrees.
Recirculation Sets the amount of processed signal fed back into its input. Higher values in-
(RECIR) Knob crease the number of delays and intensity of the processed signal.
Recirculation allows both positive and negative values. The polarity refers to
the phase of the delays as compared to the original signal. If Recirculation dis-
plays a positive value, all the delays will be in phase with the source. If it dis-
plays a negative value, then the phase of the delays flips back and forth be-
tween in phase and out of phase.
In the flanger mode, Recir has the potential to make some very interesting
sounds. Try turning RECIR fully clockwise or counter-clockwise, and set the de-
lay to very short but different values.
Damping Knob This low pass filter reduces the amount of high frequencies in the signal. Turn
down this control to reduce the brightness. Higher values yield a brighter sig-
nal. Damping also mimics air absorption, or high frequency rolloff inherent in
tape-based delay systems.
Wet/Dry Mix This control determines the balance between the delayed and original signal.
Knob Values greater than 50% emphasize the wet signal, and values less than 50%
emphasize the dry signal. A value of 50% delivers equal signals. A value of
0% is just the dry signal.
Wet/Dry Mix allows both positive and negative values. The polarity refers to
the phase of the delays as compared to the original signal. If a positive value
is displayed, then all the delays will be in phase with the source. With a neg-
ative value, the delayed signal is flipped 180 degrees out of phase with the
source.
L-Pan Knob Sets the stereo position for the left channel, allowing you to adjust the width
or balance of the stereo signal. For a mono signal, L-Pan behaves as the level
control for the left delay tap.
R-Pan Knob Sets the stereo position for the right channel, allowing you to adjust the width
or balance of the stereo signal. For a mono signal, R-Pan behaves as the level
control for the right delay tap.
Enable/Bypass Enables or disables the Delay Modulator. You can use this switch to compare
Switch the DM-1 settings to the original signal or bypass the entire DM-1 section to
reduce UAD DSP load (load is not reduced if UAD-2 DSP LoadLock is en-
abled).
DM-1L
DM-1L is identical to the DM-1 except that the maximum available delay time
per channel is 2400milliseconds. DM-1L requires significantly more memory
resources of the UAD than the DM-1. Therefore, we recommend using the DM-
1L only when very long delay times are needed.
Overview The RS-1 Reflection Engine simulates a wide range of room shapes, and sizes,
to drastically alter the pattern of reflections. While similar to that of the
RealVerb Pro plug-in, the RS-1 does not offer the same breadth of features
(such as room hybrids, room materials, morphing, and equalization). How-
ever, if you do not need the advanced capabilities that RealVerb Pro offers,
you can use the RS-1 to achieve excellent room simulations, while also pre-
serving DSP resources on the UAD device.
The Delay control sets the time between the direct signal and the first reflec-
tion. The Size parameter controls the spacing between the reflections. The Re-
cir control affects the amount of reflections that are fed back to the input and
controls how many repeats you hear.
Sync Button This button puts the plug-in into Tempo Sync mode. See Chapter 8 in the UAD
System Manual for more information.
Shape Pop-up Determines the shape of the reverberant space, and the resulting reflective
Menu patterns.
Delay Knob Sets the delay time between the original signal and the onset of the reflec-
tions.
Size Knob Sets the size of the reverberant space (from 1–99 meters) and defines the
spacing of the reflections.
Delay/Size You may notice that when Delay is set to its maximum value and the Size con-
Settings trol is moved to its maximum value, the Delay value is decreased, and vice
Interaction
versa. This occurs because the maximum delay time available to the plug-in
has been reached — the available delay time is limited and is divided among
the Delay and Size values. Therefore, if the value of the Delay or Size setting
is increased towards maximum when the other control is already high, its
complementary setting may be reduced.
Recirculation Sets the amount of processed signal fed back into its input. Higher values in-
(RECIR) Knob crease the number of reverberations/delays and intensity of the processed
signal.
Damping Knob This low pass filter reduces the amount of high frequencies in the signal. Turn
down this control to reduce the brightness. Higher values yield a brighter sig-
nal. Damping also mimics air absorption, or high frequency rolloff inherent in
tape-based delay systems.
Wet/Dry Mix This control determines the balance between the delayed and original signal.
Knob Values greater than 50% emphasize the wet signal, and values less than 50%
emphasize the dry signal.
Wet/Dry Mix allows both positive and negative values. The polarity refers to
the phase of the delays as compared to the original signal. If a positive value
is displayed, then all the delays will be in phase with the source. With a neg-
ative value, the delayed signal is flipped 180 degrees out of phase with the
source.
L-Pan Knob Sets the stereo position for the left channel, allowing you to adjust the width
or balance of the stereo signal. For a mono signal, set both the L-Pan and R-
Pan to the left.
R-Pan Knob Sets the stereo position for the right channel, allowing you to adjust the width
or balance of the stereo signal. For a mono signal, set both the L-Pan and R-
Pan to the left.
Enable/Bypass Enables or disables the Reflection Engine. You can use this switch to compare
Switch the RS-1 settings to the original signal or bypass the entire RS-1 section to re-
duce UAD DSP load (load is not reduced if UAD-2 DSP LoadLock is enabled).
Overview
The dbx® 160 Compressor/Limiter is an officially licensed and faithful emu-
lation of the legendary dbx 160 hardware compressor/limiter — still widely
considered the best VCA compressor ever made. Originally designed and
sold by David Blackmer in 1971, this solid-state design set the standard for
performance and affordability. The dbx 160 (commonly referred to as the
“VU”) is a highly regarded studio staple, famous for its simple control set and
firm, distinct compression characteristics. Unlike later monolithic IC units, the
“VU” uses a series of discrete components for gain reduction resulting in
unique nonlinearities not found in other VCA compressors — a sonic distinc-
tion from later models. The UAD Powered Plug-In version of the dbx 160 cap-
tures all of the sonic nuances from our “golden” modeling unit, plus the simple
control set of the original hardware, including Threshold, Compression (Ratio)
and Output Gain. Just like with the hardware, LED threshold indicators are
provided in the plug-in, as well the Input/Output/Gain Change VU meter for
which the unit is famous.
Threshold Knob
The available range is from –55 dB to 0 dB. The numbers on the graphical in-
terface indicate volts, as on the original hardware.
Below
When the input signal is below the compression threshold value, the Below
LED illuminates. No compression is occurring when Below is lit.
Above
The Above LED illuminates when the input signal has exceeded the Threshold
value, indicating that compression is occurring. The higher the signal is above
the Threshold, the brighter the LED glows.
Output Gain Output Gain controls the signal level that is output from the
plug-in. The available range is ±20 dB.
Meter Buttons The Meter buttons define the mode of the VU Meter.
The buttons do not change the sound of the signal
processor. The active button has a darker appear-
ance when compared to the inactive buttons.
Power The Power switch determines whether the plug-in is active. Click the
button to toggle the state. When the Power switch is in the Off
(lighter) position, plug-in processing is disabled and UAD DSP us-
age is reduced (load is not reduced if UAD-2 DSP LoadLock is en-
abled).
DreamVerb
Overview
DreamVerb™, Universal Audio’s unique stereo reverb plug-in, draws on the
unparalleled flexibility of RealVerb Pro. Its intuitive and powerful interface lets
you create a room from a huge list of different materials and room shapes.
These acoustic spaces can be customized further by blending the different
room shapes and surfaces with one another, while the density of the air can
be changed to simulate different ambient situations.
DreamVerb also features a flexible 5-band active EQ and unique level ramp-
ing for the early and late reflections for ultra-realistic dynamic room simula-
tion. And with Universal Audio’s proprietary smoothing algorithm, all param-
eters can be adjusted with automation or in real-time without distortion, pops,
clicks, or zipper noise.
DreamVerb provides two graphic menus for selecting preset room shapes.
The shapes can be blended according to the demands of your mix. Room ma-
terials are selected with two graphic menus containing preset Materials. A
third menu specifies the air density for further spectral control. As with the
room shapes, the materials and air can be blended as desired.
Signal Flow
Figure 38 illustrates the signal flow for DreamVerb. The input signal is equal-
ized then delay lines are applied to the early reflection and late field gener-
ators. The resulting direct path, early reflection, and late-field reverberation
are then independently positioned in the soundfield.
Pan
Direct Path
Source
Wet/Dry
Input
Mix
Early
EQ Delay
Reflections
Gain & Gain Output
Pans &
Mute Distance
Late-
Delay Field
Reverb
The EQ curve effects the signal feeding both the early reflections and the late
field reverberations, but not the direct path.
Note: The values for the EQ parameters are displayed in the text fields at the
bottom of the Resonance panel. The values can also be entered directly using
the text entry method.
Bypass The equalizer can be disabled with this switch. When the switch is off (black
instead of grey), the other resonance controls have no effect. This switch has
no effect on the direct signal path.
Band Amplitude Each of the five bands has its own amplitude (gain) control. The amplitude
range of each band is –30 dB to +20 dB.
To adjust the amplitude of bands 2, 3, and 4, grab the control bat for the band
and drag vertically or use the direct text entry method. For bands 1 and 5,
drag the horizontal line (these do not have a control bat).
Band Edge Bands 2, 3, and 4 have an Edge control. This parameter effects the band-
width of the band. To adjust the band edge, grab its control bat and drag hor-
izontally or use the direct text entry method.
The effect of the band edge on the filter sound can depend upon the settings
of the adjacent bands. For example, the sonic effect of this parameter is more
pronounced if the amplitude of adjacent bands is significantly different than
that of the band whose edge is being adjusted.
Shape Panel
The parameters in the Shape panel, in conjunction with the Materials panel
(Figure 42 on page 110), effect the spatial characteristics of the reverb.
First shape
First shape selector
display menu
Blending bar
Second
shape Second shape
display selector menu
Shape Blending The Shape Blending Bar (see Figure 41 on page 108) is used to blend the two
Bar shapes together at any ratio. The two shapes are not just mixed together with
this parameter; the early reflections algorithm itself is modified by blending.
Blend the early reflection patterns of the two rooms by dragging the Blending
Bar. Drag the bar to the bottom to emphasize the first shape; drag to the top
to emphasize the second shape.
The relative percentages of the two rooms appear at the bottom of the Shape
panel. To use only one room shape, drag the Blending Bar so a shape is set
to 100%.
The resulting early reflection pattern is displayed at the top of the Reflections
panel (Figure 43 on page 113), where each reflection is represented by a yel-
low vertical line with a height indicating its arrival energy, and a location in-
dicating its arrival time.
Note: While materials are used to control decay rates as a function of fre-
quency, the overall decay rate of the late-field reverberation is controlled from
the Reverberation panel (see Figure 44 on page 114).
Note: The parameters in the Materials panel always effect the late-field re-
verberations. However, the materials parameters effect the early reflections
ONLY if the “Filtering” parameter in the Reflections panel (Figure 43 on
page 113) is set to a non-zero value.
Solid materials
Second
Blending Bar
material
display
Air Density DreamVerb allows you to specify the density of the air in
Menu the reverberant space with this menu, enabling another
dimension of sonic control.
Materials Blending
Blend the two materials by dragging the vertical Blending Bar horizontally.
Drag the bar to the right to emphasize the first material; drag to the left to em-
phasize the second material.
The relative percentages of the two materials appear next to each menu in the
Materials panel. To use only one material, drag the Blending Bar so a mate-
rial is set to 100%.
Air Blending
Blend the air density with the materials by dragging the horizontal Blending
Bar vertically. Drag the bar to the top to emphasize the solid materials; drag
to the bottom to emphasize the air.
The percentage of air used appears next to the Air Density menu. To use only
solid materials, drag the horizontal Blending Bar to the top so air is set to 0%.
To use only air, drag the horizontal Blending Bar to the bottom so air is set to
100%.
Reflections Panel
The Reflections panel (Figure 43 on page 113) offers control over the timing
and relative energies of the reverb early reflections (ER). These parameters ef-
fect the reverb’s perceived clarity and intimacy. Each early reflection is visu-
ally represented by a yellow vertical line with a height indicating its arrival en-
ergy and a location indicating its arrival time.
Note: The values for the Start and End bats are displayed in the text fields at
the bottom of the Reflections panel. These values can also be entered directly
using the text entry method.
Bypass
switch
Materials
Filtering
control bat
ER Start control
bat (predelay &
amplitude)
Late-field
relative timing
display
Bypass The early reflections can be disabled with this switch. When the switch is off
(black instead of grey), the other Reflections controls have no effect. This
switch has no effect on the direct signal path.
Reflections Start This bat controls two early reflections start parameters. Dragging the bat hor-
izontally controls the ER predelay (the delay between the dry signal and the
onset of the ER). Dragging it vertically controls the amplitude of the reflections
energy at the ER start time.
Reflections End This bat controls two ER end point parameters. Dragging the bat horizontally
controls the ER end time (the time at which the ER is no longer heard). Drag-
ging it vertically controls the amplitude of the reflections energy at the end
point.
Filtering This parameter determines the amount of filtering from the Materials panel to
be applied to the early reflections. The Materials effect upon the ER is most
pronounced when Filtering is set to 100%.
Note: The parameters in the Materials panel have no effect on the early re-
flections unless this parameter value is above 0%.
Reverberation Panel
The Reverberation panel (Figure 44) contains the parameters that control the
late-field (LF) reverb tail for DreamVerb.
Note: The values for the late-field controls are displayed in the text fields at
the bottom of the Reverberations panel. These values can also be entered di-
rectly using the text entry method.
Bypass
switch Amplitude
and Slope
control bat
Early reflections
relative timing
display Diffusion
control
Late-field
start time Decay Time
control bat control bat
Bypass The late-field reverberations can be disabled with this switch. When the
switch is off (black instead of grey), the other Reflections controls have no ef-
fect. This switch has no effect on the direct signal path.
Amplitude & This bat controls two late-field parameters. Dragging the bat vertically con-
Slope trols the maximum amplitude of the LF reverb energy. Dragging it horizontally
controls the LF slope (fade-in) time.
Decay Time This control effects the length of the reverb tail. Drag the bat to the left for a
short decay, or to the right for a long decay.
Diffusion This slider effects how quickly the late-field reverberations become more
dense. The higher the Diffusion value, the more rapidly a dense reverb tail
evolves.
ER Relative To highlight the relative timing relationship between the early reflections and
Timing late-field reverberation components, the shape and timing of the early reflec-
tions is represented as an outline in the Reverberation panel. The shape of this
outline is modified by parameters in the Reflections panel, not the Reverbera-
tion panel.
Positioning Panel
DreamVerb has the ability to separately position the direct path, early reflec-
tions, and late-field reverberation. The Positioning panel (Figure 45 on
page 116) provides panning controls for each of these reverb components. In
addition, a proprietary Distance control adjusts perceived source distance.
These controls allow realistic synthesis of acoustic spaces—for instance listen-
ing at the entrance of an alley way, where all response components arrive
from the same direction, or listening in the same alley next to the source,
where the early reflections and reverberation surround the listener.
Direct These two sliders control the panning of the dry signal. The upper Direct slider
controls the left audio channel, and the lower Direct slider controls the right
audio channel.
A value of <100 pans the signal hard left; a value of 100> pans the signal
hard right. A value of <0> places the signal in the center of the stereo field.
Note: If the DreamVerb “Mix” parameter (page 117) is set to 100% wet or
the Wet button is active, these sliders have no effect.
Early This slider, which contains two control handles, adjusts the stereo width of the
early reflections.
Late This slider, which contains two control handles, adjusts the stereo width of the
late-field reverberations.
The left and right slider handles are dragged to adjust the stereo width. For a
full stereo spread, drag the left handle all the way to left and right handle all
the way to the right. When the slider handles are not set to maximum width,
the center of the slider can be dragged left or right to set the positioning of the
signal.
To pan a mono signal hard left or right, drag the slider all the way to the left
or right.
Larger percentages yield a source that is farther away from the listener. A
value of 0% places the source as close as possible to the listener.
Levels Panel
This panel is where DreamVerb input/output levels, wet/dry mix, and reverb
mute controls can be modified.
Input Modifies the signal level at the input to DreamVerb. A value of zero is unity
gain.
Output Modifies the signal level at the output of DreamVerb. A value of zero is unity
gain.
Mix The wet and dry mix of DreamVerb is controlled with this slider. The two but-
tons above this slider labeled “D” and “W” represent Dry and Wet; clicking
either will create a 100% dry or 100% wet mix.
Dry When this button (labeled “D”) is enabled, DreamVerb is 100% dry. It has the
same effect as moving the Mix slider to 0%. Dry is on when the button is gray
and off when the button is black.
Wet When this button (labeled “W”) is enabled, DreamVerb is 100% wet. It has
the same effect as moving the Mix slider to 100%. Wet is on when the button
is gray and off when the button is black.
Spatial Characteristics
Size The apparent size of a reverberant space is dependent on many factors. Most
reverbs on the market have a “size” parameter, which usually modifies sev-
eral facets of the reverb algorithm at once. You may notice DreamVerb does
not have a “size” parameter. Instead, the elements that control the reverber-
ant space are available to the user.
In DreamVerb, room size is determined by the interaction between all the pa-
rameters in the Reflections and Reverberation panels. To get a larger-sound-
ing space, increase the T60 (reverberation time), use proportionally more air,
increase the pre-delays, and slightly shift the Resonance transition frequencies
to lower values.
Pre-Delay Intimacy and remoteness are largely controlled by the pre-delays. Generally
speaking, use shorter pre-delays for more intimate spaces. Clear spaces have
most of their energy in the first eighty milliseconds or so; muddy spaces have
a lot of late arriving energy.
Space In some sense, Shape determines the spatial characteristics of the reverbera-
tor, whereas Materials effects the spectral characteristics.
• Start by setting a general timing on the ER and LF graphs to give a rough re-
verb size. This timing ordinarily needs to be tweaked several times along
the way.
• The materials and air density define the frequency decay of the LF, and also
the coloration of the ER if ER filtering is used (the slider on the right of the Re-
flections panel).
• Typically, materials should be blended. Try blending contrasting high fre-
quency roll-off materials with high-frequency reflecting materials or inverse
materials. This tends to add nice dimension to the LF tail. Start with one use-
ful material and experiment with blending.
• Materials can have an extreme filtering effect if no air density is used. Most
presets sound better with an air blending. If you don't want the additional
coloration of air, blend with “Ideal Gas” which performs no filtering.
• The room shapes define the ER pattern; they do not effect the LF. Solo the ER
and choose a shape that works well for your source or environment.
• Blending shapes does not always yield desirable results. Use shape blend-
ing with discretion, or to define a more complex room.
• Start with the EQ flat, set the approximate sound with the materials, then EQ
the input to cut or boost specific frequencies.
Introduction
FATSO Jr. Endorsed and scrutinized for accuracy by designer Dave Derr of Empirical
Labs (originator of the hugely popular Distressor), UA has painstakingly rec-
reated the highly regarded FATSO Jr. as a plug-in, capturing the sonic nu-
ances of the hardware. The FATSO (Full Analog Tape Simulator and Opti-
mizer) is designed to musically integrate frequencies and transients and
increase the apparent volume of your source material in the same way classic
analog equipment does. It achieves this through an ingenious design and a
creative feature set, giving users the ability to impart the wonderfully warm
and pleasing sonic characteristics of magnetic recording tape and class A
transformer and tube circuits. The Input control gives the ability to dial in har-
monic generation/distortion while “Tranny” and “Warmth” allow the user to
dial in just the right amount of tape and tube tone. The FATSO also operates
as a highly versatile compressor—useful for mixing and stereo buss compres-
sion. From tame to trashed, the FATSO offers a wide palette of possibilities for
adding character and cohesiveness to your DAW tracks.
FATSO Sr. Dubbed the FATSO Sr., UA has also worked closely with Dave Derr to bring
you his never-before-available original concept of the FATSO, bundled at no
additional charge. Adding his own custom mods that turn the original FATSO
into an unbelievable powerhouse of tonal-shaping possibilities, the FATSO
Sr. offers a “Tranny” saturation control, sidechain filtering, and deeper com-
pression parameters including Threshold, Attack and Release. These special
FATSO Sr. mods are only available with Universal Audio’s plug-in version of
this unique studio tool.
Note: The additional controls in the FATSO Sr. do not add to the DSP func-
tionality of the FATSO Jr. Therefore, both plug-ins use the same amount of
UAD DSP.
UAD Powered Plug-Ins Manual - 121 - Chapter 11: Empirical Labs EL7 FATSO
FATSO Screenshots
Four Processing The FATSO was essentially designed to integrate frequencies in a musical
Types manner and provide some foolproof vintage sounding compression. Gener-
ally, it is difficult to make the unit sound unnatural due to its vintage topology.
FATSO provides four types of processing.
It is well known that the triode distortion in tube circuits produces lots of 2nd
order and 3rd order harmonics, in somewhat varying ratios. Analog tape
also saturates in this manner. The 3rd order harmonic is induced in the
FATSO by increasing the level through two discrete distortion circuits and is
usually the result of flattening the tops and bottoms of waveforms. Second or-
der harmonics are also added especially while compressing in the FATSO.
The FATSO’s input clipping will give you the same result. These lower order
harmonics form “the octave” and “the octave and a fifth” to the fundamental
musical tones. They are actually “musical” distortion. Harmonics above the
UAD Powered Plug-Ins Manual - 122 - Chapter 11: Empirical Labs EL7 FATSO
2nd and 3rd get increasingly harsh and unmusical, and therefore should be
lower in amplitude (<-60 dB) to keep within our line of thinking. Second har-
monic is considered to be the warmest and most “consonant” harmonic dis-
tortion.
The Warmth circuit is by far the most complex part of the FATSO. Basically,
it is a very strange high frequency (HF) gain control circuit or HF limiter. It is
very unobtrusive in operation since it gets in and out of the way very quickly.
The desired result is akin to the HF saturation that analog tape exhibits when
the HF amplitude interacts with the tape recorder bias to produce “self era-
sure” of certain frequencies. The nature of the filter allows the corner fre-
quency to move as attenuation occurs.
There is only one control for Warmth but there are other ways to control the
overall action of this circuit. If you do decide to use the compressor, set it up
first because it affects the operation of Warmth. There is heavy interaction be-
tween the compressor and Warmth settings. Perhaps the best way to think of
the settings is as compressor threshold, with 7 having the lowest threshold and
the most Warmth, responding quickly and often to high frequency content.
Just remember that instead of controlling the overall level, the Warmth “com-
pressor” threshold only affects the high frequencies.
UAD Powered Plug-Ins Manual - 123 - Chapter 11: Empirical Labs EL7 FATSO
Transformer design and use is an art, and there are always trade-offs. How-
ever, it has been widely known that a good audio transformer circuit can do
wonderful things to an audio signal. This was the goal of the Tranny circuit.
The hardware designers tried to emulate the desirable characteristics of the
good old input/output transformers in a consistent musical way, and in a se-
lectable fashion. The addition of harmonics and peak saturation along with
frequency and phase changes on the low frequencies occurs. They found that
they could capture the low frequency effects of large and now expensive
older output transformers in a weird, internally buffered switchable design.
To sum up the musical results of the Tranny circuit, there will be a little more
edge in the midrange, and the super low frequencies will have been harmon-
ically altered in a way that allows them to sound louder, even though the
peaks are less than the original. Playback on small speakers will show an im-
proved audibility of low end from the result of the psycho-acoustically-pleas-
ing distortion the Tranny adds.
There are essentially four discrete compressors in the FATSO: Buss, General
Purpose (G.P.), Tracking, and Spank. Switching modes simultaneously sets
the compressor threshold, ratio, attack, and decay. This was done to provide
an easy-to-set, yet versatile group of curves. The release curve of all types is
logarithmic, meaning it lets off quickly at first and then slows. This release
curve is a big part of the FATSO's compressor sound.
Note: Threshold, attack, and decay values can be modified in the FATSO Sr.
Buss
Buss mode (green LED) is a very gentle 2:1 type ratio with slow attack, fast re-
lease, and very soft knee. One to four dB of gain reduction is typical for this
compressor type. Five or more dB of Buss compression is hitting it hard!
G.P.
General Purpose mode (yellow LED) is medium attack slow release type that
sounds pretty invisible while able to maintain a consistent RMS level. The slow
release will not pull things into your face unnaturally.
UAD Powered Plug-Ins Manual - 124 - Chapter 11: Empirical Labs EL7 FATSO
Tracking
Tracking mode (green and yellow LED) is an 1176 type compressor that is
great for tracking instruments and vocals during the recording process or dur-
ing mixdown.
Spank
Spank mode (red LED) is a radical limiter type compressor that was specifi-
cally designed to emulate the nice squeeze of the older SSL talkback compres-
sors from the 70's & 80's, but with quite a bit of higher fidelity. Note that
Spank's aggressive nature will tend to dominate when combined with any of
the other modes.
FATSO Controls
General notes about FATSO controls are below, followed by a detailed de-
scription of each channel-specific control, the global controls, and the FATSO
SR. controls.
Each of the channel functions has its own separate group of controls (one set
each for channels 1 and 2). Since the controls for each of the two channels
are identical, they are detailed only once.
Pushbuttons All FATSO pushbuttons are momentary. The value of the parameter incre-
ments by one step each time the button is clicked (holding the button down
does not continue to increment the value). The value cycles to the beginning
when the end of the range is reached. Clicking on the control LED indicators
has no effect, with the exception of the LINK parameters (page 129).
UAD Powered Plug-Ins Manual - 125 - Chapter 11: Empirical Labs EL7 FATSO
Channel Controls
Input The Input knob defines the signal level going into the
plug-in. Higher levels result in a more saturated signal.
Levels above 0 VU provide dramatically higher distortion
characteristics, especially when clipped (as indicated by
the Pinned LED). See THD Indicators below.
Note: This control has no effect when Bypass (page 128) is active.
THD Indicators The Total Harmonic Distortion (THD) LED's provide some reference
operating levels. The yellow “0 VU” LED light indicates around 1%
THD, and the red “Pinned” LED indicates 5% THD or more. These
LED's are an excellent guide to where the user is in the “Grunge Department.”
You will find that the harmonic distortion is generally more obvious on overall
mixes and complex programs. On individual instruments, sometimes 10% dis-
tortion sounds “fat” and “analog” and isn't heard as distortion at all.
Note: Generally speaking, the Input and compressor Mode controls should
be set before the other FATSO processor settings, because of the high degree
of interaction between the compressor and the other processors.
Mode LED’s The three Mode LED's indicate the active mode. Refer to Table 12 on
page 127 for each specific value. The compressor is inactive when all Mode
LED’s are off.
UAD Powered Plug-Ins Manual - 126 - Chapter 11: Empirical Labs EL7 FATSO
Table 12. Compressor Mode LED States
Compressor Mode LED State Active Compressor Mode(s)
Green Buss
Red Spank
GR Meter The Gain Reduction Meter displays the amount of gain reduction occurring
within the FATSO compressor, expressed as negative dB values.
Note: At extreme settings, the GR Meter may indicate gain reduction is oc-
curring even when the compressor is disabled. This behavior is identical to the
hardware unit.
Warmth Meter The Warmth Meter is a very accurate display of the amount of high frequency
attenuation, as defined by the Warmth button. The meter shows the amount of
HF gain reduction occurring at 20 kHz.
Note: At extreme settings, the Warmth Meter may indicate activity even
when Warmth is disabled. This behavior is identical to the hardware unit.
UAD Powered Plug-Ins Manual - 127 - Chapter 11: Empirical Labs EL7 FATSO
Bypass/Tranny This black button is a multifunction control. Clicking the button re-
peatedly cycles through Tranny, Bypass, and Tranny Off modes.
The currently active mode is indicated by the adjacent LED's.
The Tranny processor is active in this mode (see “The Tranny Processor” on
page 123 for a detailed description of this mode). The Tranny circuit adds fre-
quency “rounding,” low order clipping, intermodular distortion and transient
clipping. On FATSO Sr., the Tranny amount can be set with the Tranny Level
control (page 133).
Note: Disabling Tranny will yield a significant reduction in UAD DSP usage
when DSP LoadLock is disabled. If DSP LoadLock is enabled (the default set-
ting), disabling Tranny will not reduce DSP usage.
In this mode, the Tranny processor is inactive but the other processors are ac-
tive. This mode requires less UAD DSP than when Tranny is active.
All FATSO controls and processing for the channel are inactive in this mode.
Note: UAD DSP load is not reduced in Bypass mode. If you want to reduce
UAD DSP usage when bypassing both channels of the FATSO, use the Power
switch instead (page 130).
Output The Output knob controls the signal level that is output
from the plug-in.
UAD Powered Plug-Ins Manual - 128 - Chapter 11: Empirical Labs EL7 FATSO
Global Controls
The global controls are not channel-specific; they apply to both channels.
Link Compress The control signal sidechains of the gain reduction processors for
channels 1 and 2 can be linked using the Link Compress function.
To activate Link Compress, click the LINK COMPRESS text or LED on Ch1, on
the left. The feature is active when the LED is illuminated.
In typical use on stereo signals, Link Compress should be active so the stereo
imaging is maintained. If the compressor is inactive (“Compressor Mode” on
page 126), or when FATSO is used in a mono-in/mono-out configuration,
this control has no effect.
Important: Unlike the other controls for channels 1 and 2, which are iden-
tical on the left and right sides of the interface, the Link COMPRESS function
is on the left side only (not to be confused with Link CONTROLS, which is on
the right side only).
Link Controls The parameter controls for channels 1 and 2 can be linked using
the Link Controls function.
To activate Link Controls, click on the LINK CONTROLS text or LED on Ch2,
on the right. The feature is active when the LED is illuminated.
Note: Although the left/right Warmth and Tranny controls are linked when
Link Controls is active, the actual Warmth and Tranny processors are not ste-
reo linked. This behavior is identical to the original hardware.
Controls Linked
Link Controls is provided for stereo operation when both channels require the
same values. When enabled, the right channel controls “snap” to match the
left channel control values, and modifying any channel control causes its ste-
reo counterpart control to move to the same position (channel 1 & 2 controls
are ganged together in this mode).
Important: Right channel parameter values are lost the moment Link Con-
trols is enabled.
UAD Powered Plug-Ins Manual - 129 - Chapter 11: Empirical Labs EL7 FATSO
Controls Unlinked
Important: Unlike the other controls for channels 1 and 2, which are iden-
tical on the left and right sides of the interface, the Link CONTROLS function
is on the right side only (not to be confused with Link COMPRESS, which is on
the left side only).
Power The Power toggle switch determines whether the plug-in is active. It
is useful for comparing the processed settings to the original signal.
When Power is in the Off (down) position, plug-in processing is dis-
abled, UAD DSP usage is reduced, and all LED's are unlit.
Note: UAD-2 DSP usage is reduced only when DSP LoadLock is disabled. If
DSP LoadLock is enabled (the default setting), disabling Power will not reduce
DSP usage.
Click the lower portion of the switch to disable the plug-in; click the upper por-
tion to activate (or click+drag up/down on the switch).
UAD Powered Plug-Ins Manual - 130 - Chapter 11: Empirical Labs EL7 FATSO
Filter Filter regulates the cutoff frequency of the filter on the compres-
(HP SIDE FILT) sor's control signal sidechain. When active, frequencies below
the filter value are not passed to the sidechain. Values of 60
Hz, 120 Hz, 240 Hz, 480 Hz, and Off are available. The filter
slope is 6 dB per octave. When the compressor is disabled, Fil-
ter has no effect and its LED turns off. When the compressor is
enabled, Filter returns to its original value.
Tip: Removing low frequency content from the sidechain can reduce exces-
sive gain reduction and/or “pumping” on bass-heavy audio signals without
reducing bass content of the audio signal itself.
Note: The Filter parameter affects the control signal (sidechain) of the com-
pressor only. It does not filter the audio signal.
Attack Attack sets the amount of time that must elapse once the input signal
reaches the threshold level before compression is applied. The
faster the attack, the more rapidly compression is applied to signals
above the threshold.
The available attack time values are 0.9ms, 10ms, 30ms, 60ms,
and Default (unlit). The unlit behavior is depends upon whether or not the com-
pressor is active. These behaviors are described below.
Note: Attack values are approximations. Actual attack and release times
may vary depending on the compressor mode selected.
When the compressor is enabled and all Attack LED’s are unlit, the attack
characteristic of the active compressor mode in FATSO Jr. is used. This “de-
fault” FATSO Jr. behavior can then be manually overridden with the Attack
button. However, when “pure” Spank mode is active, Attack cannot be mod-
ified. When Spank mode is combined with another compressor mode, Attack
can be changed, but the results are typically very subtle.
Tip: After experimenting with other time constants, one can return to the de-
fault attack setting of the FATSO Jr. if desired by cycling the attack control until
NO LEDs are lit (which indicates the default FATSO Jr. time constant).
UAD Powered Plug-Ins Manual - 131 - Chapter 11: Empirical Labs EL7 FATSO
Attack LED’s Unlit – Compressor Inactive
When the compressor is disabled and all Attack LED’s are unlit, the button is
disabled.
Note: This control has no effect when the compressor is inactive, or when it
is in “pure” Spank mode (see “Compressor Mode” on page 126).
Release Release sets the amount of time it takes for compression to cease
once the input signal drops below the threshold level. Slower re-
lease times can smooth the transition that occurs when the signal
dips below the threshold, especially useful for material with fre-
quent peaks. However, if you set too large of a Release time, com-
pression for sections of audio with loud signals may extend to
lengthy sections of audio with lower signals.
The available release time values are 0.05s, 0.1s, 0.s, 0.5s, and Default (un-
lit). The unlit behavior is depends upon whether or not the compressor is ac-
tive. These behaviors are described below.
Note: Release values are approximations. Actual attack and release times
may vary depending on the compressor mode selected.
When the compressor is enabled and all Release LED’s are unlit, the release
characteristic of the active compressor mode in FATSO Jr. is used. This “de-
fault” FATSO Jr. behavior can then be manually overridden with the Release
button. However, when “pure” Spank mode is active, Release cannot be mod-
ified. When Spank mode is combined with another compressor mode, Re-
lease can be changed, but the results are typically very subtle.
Tip: After experimenting with other time constants, one can return to the de-
fault release setting of the FATSO Jr. if desired by cycling the release control
until NO LEDs are lit (which indicates the default FATSO Jr. time constant).
When the compressor is disabled and all Release LED’s are unlit, the button
is disabled.
Note: This control has no effect when the compressor is inactive, or when it
is in “pure” Spank mode (see “Compressor Mode” on page 126).
UAD Powered Plug-Ins Manual - 132 - Chapter 11: Empirical Labs EL7 FATSO
Tranny Level This control determines the amount of Tranny process-
ing (see “The Tranny Processor” on page 123 for a de-
tailed description). Higher values make the Tranny ef-
fect more prominent. Increasing the Tranny level also
increases the signal THD (see “THD Indicators” on
page 126), and the sensitivity of the Warmth proces-
sor (page 127). A value of 5 is the unity setting.
Note: This control has no effect when the Tranny processor is inactive (see
“Bypass/Tranny” on page 128).
LF Sat LED The LF Sat (Low Frequency Saturation) LED indicates the amount of LF satura-
tion in the Tranny processor. Higher Tranny Level values increase the LF satu-
ration.
FATSO Jr. When loading presets created on the FATSO Jr. into the FATSO Sr., the pa-
Presets rameters that are unique to FATSO Sr. are set to their default control values.
The default values of the unique FATSO Sr. parameters are: Thresh-
old/Tranny knobs at 5, and Filter/Attack/Release buttons off.
All visual and aural references to the FATSO and all use of EMPIRICAL LABS’s trademarks are being
made with written permission from EMPIRICAL LABS. Special thanks to Dave Derr for assistance
with this project.
UAD Powered Plug-Ins Manual - 133 - Chapter 11: Empirical Labs EL7 FATSO
CHAPTER 12
We thoughtfully combined the look of various elements from the EMT 140 sys-
tem into one convenient panel, replicating the original damper controls for
decay, and adding additional controls for the convenience of the modern
DAW user.
UAD Powered Plug-Ins Manual - 134 - Chapter 12: EMT 140 Plate Reverb
EMT 140 Controls
The EMT 140 interface is an amalgam of controls found at the plate amplifier
itself and the remote damper controls, plus a few DAW-friendly controls that
we added for your convenience. The GUI incorporates the original look and
feel of those controls, and utilizes that look for the DAW-only controls.
Note: When adjusting parameters, keyboard shortcuts are available for fine,
coarse, and other control methods. See “Shortcuts” in Chapter 7 of the UAD
System Manual for details.
Input Filter The Input Filter is a dedicated equalizer that is used to re-
duce low frequency content in the reverb. On hardware
plate systems, this setting is rarely modified because it is
found at the plate amplifier unit itself and is not easily ac-
cessed from the control room.
The Martech filter (indicated by red text) is a shelf filter, therefore all frequen-
cies below the frequency are reduced. Six shelving frequencies are available:
90 Hz, 125 Hz, 180 Hz, 250 Hz, 270 Hz, and 360 Hz. In controls mode,
these values are prefaced with an “M” to designate the aftermarket Martech
electronics model.
Note: There is one Input Filter per plug-in instance. Each plate model (A, B, C)
within a preset cannot have a unique Input Filter value.
UAD Powered Plug-Ins Manual - 135 - Chapter 12: EMT 140 Plate Reverb
Reverb Controls
Plate reverb systems are extremely simple: A re-
mote damper setting, and a high pass or shelf fil-
ter found at the plate itself. Additional manipula-
tion is often used, including reverb return
equalization, which is typically achieved at the
console. Predelay is/was often achieved when
necessary with tape delay, sending the return to
a tape deck. Different tape speeds allowed dif-
ferent pre-delay amount.
The original damper controls are remote control devices, usually found some-
where near the control room for quick access. Our hybrid panel combines
three remotes into the panel, with a switch to select each of the three available
systems.
Note:The reverb controls (Plate Select and Reverb Time) are completely inde-
pendent from all other plug-in controls.
Plate Select Three plate models (algorithms) are available for reverb process-
ing. This switch specifies which plate will be active.
Note: You can also switch the active plate by clicking the A, B,
or C letters above the Plate Select switch and the Reverb Time
meters.
Damper Controls The Damper Controls (the buttons beneath the Reverb Time Meters)
(Reverb Time) change the reverb time for each plate. The range is from 0.5 to 5.5
seconds, in intervals of 0.1 sec. Click the buttons to increment or
decrement the reverb time.
UAD Powered Plug-Ins Manual - 136 - Chapter 12: EMT 140 Plate Reverb
Stereo Controls
Width Width allows you to narrow the stereo image of EMT 140. The
range is from 0 – 100%. At a value of zero, EMT 140 returns a
monophonic reverb. At 100%, the stereo reverb field is as wide as
possible.
Balance This control balances the level between the left and right channels of
the reverb return. Rotating the knob to the left attenuates the right
channel, and vice versa (it is not a mono pan control).
EQ Controls
This group of parameters contains the controls for EMT
140’s onboard utility equalizer. It is a two band (low and
high) shelving EQ that uses analog-sounding algorithms
for great tonal shaping options.
EQ Enable The EMT 140 equalizer can be disabled with the EQ Enable switch. UAD DSP
usage is not increased when EQ is enabled.
Low Frequency This parameter specifies the low shelving band transition frequency to be
boosted or attenuated by the low band Gain setting. The range is 20 Hz to
2 kHz.
UAD Powered Plug-Ins Manual - 137 - Chapter 12: EMT 140 Plate Reverb
Because this is a shelving EQ, all frequencies below this setting will be af-
fected by the low band Gain value.
Low Gain This parameter determines the amount by which the transition frequency set-
ting for the low band is boosted or attenuated. The available range is ±12 dB,
in increments of 0.5 dB (fine control) or 1.0 dB (coarse control).
High Frequency This parameter determines the high shelving band transition frequency to be
boosted or attenuated by the high band Gain setting. The range is 200 Hz to
20 kHz.
Because this is a shelving EQ, all frequencies above this setting will be af-
fected by the high band Gain value.
High Gain This parameter determines the amount by which the frequency setting for the
high band is boosted or attenuated. The available range is ±12 dB, in incre-
ments of 0.5 dB (fine control) or 1.0 dB (coarse control).
Modulation Controls
The EMT 140 reverb time can be modulated by a low frequency
oscillator using rate and depth controls. The effect is subtle but it
can increase dispersion and reduce ringing on some source ma-
terial, such as loud signals with sudden endings and percussive
content.
Mod Rate
Mod Rate controls the rate of reverb time modulation. The avail-
able range is from 0.01 Hz to 1.0 Hz.
Mod Depth
UAD Powered Plug-Ins Manual - 138 - Chapter 12: EMT 140 Plate Reverb
Output Meter The vintage-style VU Meter represents the plug-in
output level. It is active when the Power switch is
on, and slowly returns to zero when Power is
switched off.
Blend Controls
Predelay The amount of time between the dry signal and the onset of the
reverb is controlled with this knob. The range is 0.0 to 250 mil-
liseconds.
Mix The Mix control determines the balance between the original and
the processed signal. The range is from Dry (0%, unprocessed) to
Wet (100%, processed signal only).
Note: If Wet Solo is active, adjusting this knob will have no affect.
Wet Solo The Wet Solo button puts EMT 140 into “100% Wet” mode. When
Wet Solo is on, it is the equivalent of setting the Mix knob value to
100% wet (and the Mix value is ignored).
Wet Solo defaults to On, which is optimal when using EMT 140 in the “clas-
sic” reverb configuration (placed on an effect group/bus that is configured
for use with channel sends). When EMT 140 is used on a channel insert, this
control should be deactivated.
Note: Wet Solo is a global (per EMT 140 plug-in instance) control.
UAD Powered Plug-Ins Manual - 139 - Chapter 12: EMT 140 Plate Reverb
Power Switch This toggle switch enables or disables EMT 140. You can use it
to compare the processed settings to the original signal, or to by-
pass the plug-in which reduces (but not eliminates) the UAD DSP
load (unless UAD-2 DSP LoadLock is enabled). The red EMT
power indicator glows brighter when the plug-in is enabled.
Note: The EMT 140 distills 1800+ pounds of classic vintage reverb into a sin-
gle plug-in. Exercise caution when lifting.
UAD Powered Plug-Ins Manual - 140 - Chapter 12: EMT 140 Plate Reverb
CHAPTER 13
Introduction
Unveiled by EMT at the AES convention in 1976 and inducted into the TEC
Hall of Fame in 2007, the EMT 250 was the first digital reverberation device
to create ambience through a purely electronic system. With its single reverb
program and iconic lever-driven control surface, the EMT 250 is still an indis-
pensable tool within the record-making elite and is widely considered one of
the best-sounding reverbs ever made. Although only around 250 were built,
the EMT 250 has made an immeasurable impact on record making history in
the hands of studio legends like George Massenburg, Bruce Swedien, Allen
Sides and many others. Captured from Allen Sides’ unit at Ocean Way Re-
cording, endorsed by EMT Studiotechnik GmbH in Germany, and re-engi-
neered for plug-in use by EMT 250 creator Dr. Barry Blesser from his original
documentation, the UAD version of the EMT 250 goes beyond emulation and
is the very same algorithm found in the original units—for a fraction of its orig-
inal $25,000 price!
Besides the coveted reverb program, the EMT 250 for UAD provides the five
additional effects (Delay, Phasing, Chorus, Echo and Space) also included in
the original unit. Lighted pushbuttons select the desired program, while four
click-stop levers provide the primary reverb parameters of delay time, prede-
lay, and high and low Filtering. LED ladders provide additional visual rein-
forcement of program selection and parameter positioning. Like the hard-
ware, the plug-in operates in “quad,” with two discrete stereo output pairs
accessed through the added front/rear output switch. Additional “digital
only” features include dry/wet mix, wet solo, reduced noise (if desired), and
hard bypass via the EMT power icon.
UAD Powered Plug-Ins Manual - 141 - Chapter 13: EMT 250 Electronic Reverberator
EMT 250 Screenshot
Functional Overview
Program Modes The EMT 250 offers six effect types: Reverb, Delay, Phase, Chorus, Echo, and
Space. These effects are called “program modes” in the EMT 250. Only one
mode can be active at a time.
Each program mode has up to five parameters that can be modified by the
four main control “levers” plus the front/rear switch. The function of these con-
trols varies per program mode (see below). Additionally, there are several
global controls that have the same function in all modes.
Variable Control The function of control levers 1, 2, 3, and the Front/Rear switch depends
Functions upon which program mode is active. This is a primary consideration to re-
member when operating the EMT 250. Table 13 on page 145 details the
varying functions of the control levers and the front/rear switch in each mode.
Important: The function of the “levers” and the front/rear switch changes
depending on the program mode.
UAD Powered Plug-Ins Manual - 142 - Chapter 13: EMT 250 Electronic Reverberator
Each unique parameter in the plug-in retains a distinct value, but only the pa-
rameters that are active in the current program mode are visible in the graph-
ical user interface. All parameters are always visible in Controls View (see
Chapter 7 of the UAD System Manual), even when they are not active in the
current program mode.
Important: The value of lever parameters that are not active in the current
program mode are not saved in sessions or presets. The unsaved parameters
are marked with an asterisk in Table 13 on page 145.
Lever 4 Predelay In all program modes, lever 4 controls the predelay (the initial delay before
other processing occurs) of both channels (left and right). Predelay times of
0ms, 20ms, 40ms, and 60ms are available in 4 steps. The green LEDs on the
right side of lever 4 display the current predelay value.
Mono/Stereo The EMT 250 hardware unit has one (mono) input. For accurate emulation
Operation when the plug-in is used in a stereo-in/stereo-out configuration, stereo signals
at the plug-in input are summed to mono before processing; the dry signal is
passed in stereo.
Front/Rear The EMT 250 hardware unit has four discrete outputs. Two outputs were de-
Outputs signed to be used as the main stereo left/right outputs, or the “front” left/right
outs in quadraphonic applications. The other two outputs were used for the
“rear” left/right signals in quad (or other creative applications). The UAD
EMT 250 fully models the individual sonics of all four outputs.
The name of the “Front/Rear Outputs” switch is derived from the original
hardware design. This control (which is unique to the plug-in) enables access
to the processed quadraphonic signal in pairs, at either the front L/R or rear
L/R outputs. When a different sound is available at the front and rear outputs,
the yellow “LED ring” around the control is illuminated. For program modes
that do not offer quadraphonic processing (e.g., Delay), the switch is re-pur-
posed to sum the processed outputs to mono. In Echo mode, it functions as an
input mute.
UAD Powered Plug-Ins Manual - 143 - Chapter 13: EMT 250 Electronic Reverberator
In some program modes, the yellow “LED ring” around the control is illumi-
nated to indicate that changing the switch position will change the sound. For
program modes that do not offer quadraphonic processing (e.g., Delay), the
switch is re-purposed to sum the processed outputs to mono. In Echo mode, it
functions as an input mute.
Automation Some EMT 250 control functions change depending on the active mode (see
“Variable Control Functions” on page 142 and Table 13 below). To accom-
modate this design, all EMT 250 parameters are exposed for automation and
external control surfaces even if the parameter is not active in the current pro-
gram mode.
Modeled I/O All input and output characteristics of the EMT 250 are fully emulated in the
plug-in. This includes all of its idiosyncrasies, such as the A/D and D/A
anti-aliasing filters (which are not linear-phase), system latency, input clip-
ping, and limited frequency response. All these quirks embellish the unique
sonic signature.
EMT 250 The EMT 250's anti-aliasing filters for its A/D and D/A conversion are not lin-
Latency ear-phase filters; therefore our emulation does not have a latency that is the
same at all frequencies. Thus, we cannot report to the delay compensation en-
gines a delay that is correct for all frequencies. The value we report is good
at low frequencies, but becomes off at high frequencies.
For example, when the plug-in is in Delay program mode and set with zero
delay time and predelay values, the plug-in output will not be completely can-
celled when mixing with flipped phase against an unprocessed track; high
frequencies will leak through. However, the latency through the dry side of the
wet/dry mix, and the latency when the plugin is bypassed via the EMT 250
Power switch (page 152), do not have this issue and will be fully compen-
sated by the DAW.
UAD Powered Plug-Ins Manual - 144 - Chapter 13: EMT 250 Electronic Reverberator
Program Mode Controls
The details of each unique program mode are below, followed by descrip-
tions of the global controls, which affect all program modes.
Control Table 13 displays the parameter that each control is mapped to for each of
Functions the EMT 250 program modes. See “Variable Control Functions” on
page 142 for details.
Delay Coarse Delay Time Fine Delay Time Selects L/R channel Predelay Stereo/Mono
for time adjustment*
Echo Coarse Delay Time Fine Delay Time HF Decay (damping) Predelay Input Mute
*Note: The parameter values of lever positions marked with an asterisk are not saved in sessions or presets.
Program Mode The Program Mode buttons define which of the available program modes is
active. The six program modes are: Reverb (REV), Delay (DEL), Phase (PHAS),
Chorus (CHOR), Echo, and Space (SPC).
Click a Mode button to activate that program mode; the button is illuminated
for the currently active mode (only one mode can be active at a time). Each
program mode and its associated parameters are described in detail below.
Tip: See Table 13 on page 145 for a matrix of controls that are available in
each program mode.
UAD Powered Plug-Ins Manual - 145 - Chapter 13: EMT 250 Electronic Reverberator
Reverb Reverb program mode offers the same all-time classic reverb algorithm that
made the EMT 250 famous.
Lever 1 controls the main reverb tail decay time. The red LEDs on the left side
of lever 1 indicate the current decay time; the green LEDs on the right side of
lever 1 are inactive.
The decay time range (at 1 kHz) is 0.4s to 4.5s, selectable via 16 steps.
LF Decay (Lever 2)
Lever 2 controls the low frequency decay time (at 300 Hz). The red LEDs on
the left side of lever 2 display the current value; the green LEDs on the right
side of lever 2 are inactive.
Four multipliers are available: x 0.5, x 1.0, x 1.5, and x 2.0. The multiplier
refers to a factor of the main decay time (lever 1). Higher values (upper lever
positions) generally result in more low frequency content in the reverb tail.
HF Decay (Lever 3)
Lever 3 controls the high frequency decay time. The red LEDs on the left side
of lever 3 display the current value; the green LEDs on the right side of lever
3 are inactive.
Four multipliers (at 6 kHz) are available: x 0.25, x 0.33, x 0.5, and max. At
the max position, the HF decay factor is x 1.0 at approximately three sec-
onds. The multiplier refers to a factor of the main decay time (lever 1). Higher
values (upper lever positions) generally result in more high frequency content
in the reverb tail.
Predelay (Lever 4)
Front/Rear
UAD Powered Plug-Ins Manual - 146 - Chapter 13: EMT 250 Electronic Reverberator
Delay Delay program mode offers two independent delay processors, one each for
the left and right output channels. Up to 375ms delay time is available for
each channel. Delay repeats (feedback) are not available in Delay mode; use
Echo mode if delay feedback is desired.
Note: The maximum per-channel delay time of 375ms in Delay mode is ob-
tained by setting the coarse, fine, and predelay times to their respective max-
imum values.
Lever 1 controls the coarse delay time for the currently selected channel (left
or right). The currently selected channel is defined by lever 3.
The coarse delay time range is 0 to 300ms, selectable via 16 steps. The
green LEDs on the right side of lever 1 display the current value; the red LEDs
on the left side of lever 1 are inactive.
Lever 2 controls the fine delay time for the currently selected channel (left or
right). The currently selected channel is defined by lever 3.
Fine delay times of 0ms, 5ms, 10ms, and 15ms are available. The green LEDs
on the right side of lever 2 display the current value; the red LEDs on the left
side of lever 2 are inactive.
Note: Levers 1 and 2 both control the delay time, but these parameters are
not individually exposed for external control surfaces and automation. In-
stead, a single delay time parameter is exposed for each channel, and levers
1 and 2 in the plug-in interface are both updated to match the value.
In Delay mode, lever 3 selects which channel (left or right) the delay time pa-
rameters (levers 1 and 2) will affect. When lever 3 is in position “L” the left
channel delay time can be adjusted; when in position “R” the right channel
delay time can be adjusted.
The green LEDs on the right side of lever 3 display the channel selected for de-
lay time adjustment; the red LEDs on the left side of lever 3 are inactive.
UAD Powered Plug-Ins Manual - 147 - Chapter 13: EMT 250 Electronic Reverberator
Important: In Delay mode, lever 3 does not control a “real” parameter; it
is only used to select the active channel for other parameters in the graphical
user interface. For this reason, the parameter is not exposed for external con-
trol surfaces or automation, nor is it saved in sessions or presets.
Predelay (Lever 4)
Front/Rear
In Delay mode, the Front/Rear Outputs switch is not illuminated (the sound is
identical in both pairs of outputs). When moved to the Rear position, the
plug-in output is summed to mono. See “Front/Rear Outputs” on page 143
for more information.
Phase Phase program mode creates a comb filter curve that results from the addition
and subtraction of two signals with a small time shift between them. The comb
filter changes the amplitude of the source signal's harmonic overtones, result-
ing in interesting tonal variations.
Tip: Phasing is most apparent when the plug-in is set to 100% wet (or when
Wet Solo (page 153) is active).
In the EMT 250, the input is fed to two delay processors; one with a fixed de-
lay time of 15ms, and the other which is variable from 0–15ms, controlled by
lever 1. By changing this variable “time shift” the phase (shape) of the comb
filter, and therefore the timbre of the output signal, is changed.
Note: Unlike many “phasors,” the EMT 250 does not modulate the variable
“time shift” with a low frequency oscillator (LFO), which results in the contin-
uously varying “swooshing” effect that is often associated with the process
name. This conventional “phasor effect” can be reproduced (with outstanding
results) by moving lever 1 back and forth, either manually or with automation.
Phase (Lever 1)
In Phase program mode, lever 1 controls the delay time (the phase “time
shift”) between the two signals that create the comb filter. Phase values of 0ms
to 15ms are available, selectable via 16 steps.
UAD Powered Plug-Ins Manual - 148 - Chapter 13: EMT 250 Electronic Reverberator
In Phase mode the green LEDs to the of right lever 1 are active, but the panel
markings (0–300ms) do not represent the actual phase delay time values. In-
stead, the LEDs indicate the relative value between 0–15ms.
Predelay (Lever 4)
Front/Rear
For more information about phasing, see the “Flangers and Phasors” article in
our December 2008 Webzine:
• http://www.uaudio.com/webzine/2008/december/doctors.html
Chorus Chorus program mode creates an “ensemble” effect by simulating the impres-
sion of multiple imprecisions added to the original signal. In EMT 250, this is
accomplished by routing the same signal to four delay processors, each hav-
ing short delay times that are continuously and randomly modulated.
While it was necessary to combine the various physical outputs for variations
of Chorus complexity, the EMT 250 plug-in is “pre-mixed” in four popular
combinations.
Four subtle variations of the chorus effect are available (I, II, III, and IV). Lever
3 specifies the current variation.
UAD Powered Plug-Ins Manual - 149 - Chapter 13: EMT 250 Electronic Reverberator
Positions “I” and “II” are of a simpler nature, while “III” and “IV” are more
complex. Position “I” duplicates the Left Front and Right Front outputs of the
hardware. “II” duplicates Left Rear and Right Rear outputs of the hardware.
“III” combines both the Left Front and Left Rear on the left side, and Right Front
and Right Rear on the right. “IV” combines Left Front, Left Rear and Right Rear
on the left side, and Left Rear, Right Front and a phase inverted Right Rear on
the right. “IV” imparts a pseudo-quadraphonic sound.
Predelay (Lever 4)
Front/Rear
In Chorus mode, the Front/Rear Outputs switch is not illuminated (the sound
is identical in both pairs of outputs). When moved to the Rear position, the
plug-in output is summed to mono. See “Front/Rear Outputs” on page 143
for more information.
Echo Echo program mode produces a single monophonic delay effect, with feed-
back and adjustable delay time. Up to 375ms of delay is available.
The feedback (recirculation) circuit is always active in Echo mode. The feed-
back signal path is attenuated by approximately 10% per loop circulation,
and includes an adjustable high frequency attenuator for damping.
Note: The maximum delay time of 375ms in Echo mode is obtained by set-
ting the coarse, fine, and predelay times to their respective maximum values.
Lever 1 controls the coarse delay time. The coarse delay time range is 0 to
300ms, selectable via 16 steps.
The green LEDs on right side of lever 1 display the current value; the red LEDs
on the left side of lever 1 are inactive.
Lever 2 controls the fine delay time. Fine delay times of 0ms, 5ms, 10ms, and
15ms are available. The green LEDs on right side of lever 2 display the cur-
rent value; the red LEDs on the left side of lever 2 are inactive.
UAD Powered Plug-Ins Manual - 150 - Chapter 13: EMT 250 Electronic Reverberator
Note: Levers 1 and 2 both control the echo time, but these parameters are
not individually exposed for external control surfaces and automation. In-
stead, a single echo time parameter is exposed, and levers 1 and 2 in the
plug-in interface are both updated to match the value.
HF Decay (Lever 3)
Lever 3 controls the high frequency damping in Echo mode. The red LEDs on
left side of lever 3 display the current value; the green LEDs on the right side
of lever 3 are inactive.
Four multipliers are available: x 0.25, x 0.33, x 0.5, and max. Higher values
(upper lever positions) result in more feedback.
Predelay (Lever 4)
Lever 4 is used as a predelay to the echo processor in this mode. The predelay
time is added to the echo times, but not to the HF decay feedback loop. See
“Lever 4 Predelay” on page 143 for more information.
Front/Rear
The Front/Rear Outputs switch is not illuminated in Echo mode (the same
monophonic signal is generated at the front and rear outputs). However, the
Front/Rear Outputs switch has a special function in Echo mode.
In the Front position, the program behaves normally. In the Rear position, the
input to the echo processor is muted, while still allowing the echo output to be
passed. This feature is useful for adding echo to specific passages only, by
flipping the switch to Front when echo is desired. The behavior is identical to
the popular “dub” switch on the Roland RE-201 (“Echo/Normal” on
page 457). See “Front/Rear Outputs” on page 143 for more information.
Space Space mode is a special reverb program with an extremely long decay time
and linear distribution of the reverberation time with frequency (all frequen-
cies decay at the same rate). Because this condition doesn't exist in nature,
and the program was originally intended for science fiction productions, the
“reverberation in outer space” moniker was derived.
UAD Powered Plug-Ins Manual - 151 - Chapter 13: EMT 250 Electronic Reverberator
Predelay (Lever 4)
Front/Rear
Global Controls
The global controls are not program-specific; they apply to all program
modes.
Power The Power button (the red EMT logo) determines whether the
plug-in is active. It is useful for comparing the processed signal
to the original signal. Click the button to disable the plug-in;
click it again to enable it.
When Power is in the Off (unlit) position, plug-in processing is disabled, and
UAD DSP usage is reduced.
Note: UAD-2 DSP usage is reduced only when DSP LoadLock is disabled. If
DSP LoadLock is enabled (the default setting), disabling Power will not reduce
DSP usage.
Input Meter The Input Meter indicates the level going into the plug-in.
On the original hardware, the red “Register” LED illumi-
nates when digital full code is reached, at 6 dB above 0 dB
(i.e., there is 6 dB of headroom on the hardware, as the
meaning of “0 dB digital” wasn't yet standardized in those
days).
UAD Powered Plug-Ins Manual - 152 - Chapter 13: EMT 250 Electronic Reverberator
Dry/Wet The Dry/Wet slider control determines the
balance between the original and the pro-
cessed signal. The range is from 0% (dry,
unprocessed) to 100% (wet, processed sig-
nal only).
This control uses a logarithmic scale to provide increased resolution when se-
lecting lower values. When the slider is in the center position, the value is
15%.
Wet Solo The Wet Solo button puts the EMT 250 into “100% Wet” mode.
When Wet Solo is on, it is the equivalent of setting the Dry/Wet
control to 100% wet.
Wet Solo defaults to On, which is optimal when using the EMT 250 in the
“classic” reverb configuration (placed on an effect group/buss that is config-
ured for use with channel sends). When the EMT 250 is used on a channel in-
sert, this control should be deactivated.
Note: Wet Solo is a global (per EMT 250 plug-in instance) control.
The Noise parameter is unique to the UAD EMT 250 plug-in. Noise is dy-
namic to the response of the effect processing, and the noise level differs from
program to program. The noise floor of the hardware EMT 250 may seem a
bit high when compared to modern digital processors, but it adds to the EMT
250’s quirky character.
UAD Powered Plug-Ins Manual - 153 - Chapter 13: EMT 250 Electronic Reverberator
CHAPTER 14
EP-34 Overview
The EP-34 combines EP-3 and EP-4 sonics and features to achieve the best of
the later solid-state Echoplex* designs. The Echoplex uses an infinite tape
loop combined with a sliding record head that allows the user to achieve the
desired delay length. EP-34 emulates the great idiosyncrasies of these
tape-based echo units such as the unique Echo Delay record head slider that
can be moved in real-time while used in conjunction with the Echoplex’s Echo
Repeats control to create echo and pitch chaos. The distinct and musical input
clipping is captured in the units’ Record Volume control making the EP-34 a
tone box for distortion. Echo Volume allows the blending of the original and
effected signal, however even the dry signal is affected by the unit. The
Echoplex self-oscillation capabilities are captured as well, including the
“squelch” effect (an interruption in self-oscillation) achieved at extreme set-
tings when processing low-frequency material like drum loops with heavy kick
drum. All this makes the EP-34 more than just a delay, but an instrument that
can be played by manipulating the controls while in chaotic oscillation. Just
like the hardware, faster-than-tape-path speeds can also be achieved, leading
to ‘sonic-boom/tape squeal’ effects again adding to chaotic but musical at-
tributes of the original hardware. The EP-34 also has other warts-and-all arti-
facts of tape such as self-chorusing due to speed variations caused by random
friction in the tape path plus pinch roller wow and flutter. The EP-34 includes
the metering and unusual but uniquely musical tone controls found on the
EP-4, but removes its undesirable in-line noise reduction circuit that users often
electronically disabled (Maestro removed this circuit soon after the product’s
release).
“Extras” not found on the original hardware include Tempo Sync, Input Select
(allows for a cleaner sound [LO] or a dirtier sound [HI]), Tension (the Echoplex
has an adjustable tension nut underneath the delay time slider for a snappy
or sludgy response time), Echo Send (identical in function to RE-201 “dub
switch”), Wet Solo, Pan (wet signal only), and Power (plug-in bypass).
*EP-34 Tape Echo is not affiliated with, sponsored nor endorsed by any companies currently using
the Echoplex name. The EP-34 Tape Echo name, as well as the EP-3 and EP-4 model names, are
used solely to identify the classic effects emulated by Universal Audio’s product.
UAD Powered Plug-Ins Manual - 154 - Chapter 14: EP-34 Classic Tape Echo
EP-34 Tape Echo Screenshot
EP-34 Controls
Echo Delay Echo Delay controls the delay time of the unit. The selected value is shown in
the Echo display (page 156).
The parameter can be adjusted by using the metallic “slider handle” or the
“slider nose” (both sliders control the same parameter; see Figure 52).
UAD Powered Plug-Ins Manual - 155 - Chapter 14: EP-34 Classic Tape Echo
The available delay range is 80 to 700 milliseconds. When Sync is active,
beat values from 1/64 to 1/2 can be selected.
When the beat value is out of range, the value is displayed in parenthesis.
This occurs in Sync mode when the time of the note value exceeds 700ms (as
defined by the current tempo of the host application). See Chapter 8 in the
UAD System Manual for more information about tempo synchronization.
Tip: Click the control slider(s) then use the computer keyboard arrow keys to
increment/decrement the sync value.
Echo Display This “window” displays the current delay time of the EP-34.
Displayed values are defined by the Echo Delay parameter
(page 155). Delay values can be entered here directly using
the text entry method.
When the beat value is out of range, the value is displayed in parentheses.
This occurs in Sync mode when the time of the note value exceeds 700ms (as
defined by the current tempo of the host application).
Echo Repeats This knob controls the repeat level (feedback) of the echo sig-
nal. At the minimum (fully counter-clockwise) position, only one
repeat is heard. Rotating the control clockwise increases the
number of echoes. Higher values will cause self-oscillation.
The EP-34’s oscillation qualities are heavily dependent upon program mate-
rial and control settings. Different sources of audio, gain, tone, repeat rate
and input settings will all effect “oscillation performance.” The EP-34 can also
achieve oscillation with no signal, making the it a truly unique instrument.
UAD Powered Plug-Ins Manual - 156 - Chapter 14: EP-34 Classic Tape Echo
Echo Volume This knob determines the wet/dry mix of the delayed signal. In
the minimum position, the “dry” signal is colored by the cir-
cuitry of the modeled emulation. Rotate the control clockwise
for louder echo. Reducing the control to its minimum value will
mute the delay.
The EP-34 models the unusual taper of this control that is found
on the original hardware. It is normal operation to have the control in the
85–95% range to get a “50/50” wet/dry balance.
Note: When the Wet switch (page 159) is in the On position, Echo Volume
has no effect.
Recording Recording Volume adjusts the input gain and clipping charac-
Volume teristics of the delayed tape signal. Increasing this control will
increase the tape distortion and “grit” that is an important ele-
ment of the famous hardware sound. The Recording Volume is
indicated by the Input Meter.
Input Meter The Input Meter in the EP-34 is a three-segment horizontal LED
array (two green, one red) that indicates the recording level at
the input of the tape recorder.
The yellow LED indicates that the plug-in is active. When the Power switch
(page 159) is enabled, the yellow LED is illuminated.
Treble
Bass
UAD Powered Plug-Ins Manual - 157 - Chapter 14: EP-34 Classic Tape Echo
Echo Pan Pan sets the position of the delayed (wet) signal in the stereo
field; it does not affect the unprocessed (dry) signal.
Tip: Click the “Echo” control text to return the knob to center.
Input The original hardware unit had two inputs: Instrument and Micro-
phone. The Input switch on the EP-34 toggles between the gain lev-
els of these two inputs.
The “LO” position captures the gain structure of the Instrument input, while the
“HI” position captures the gain structure of the Microphone input. This allows
for a cleaner (LO) or dirtier (HI) sound depending on the switch position.
The Tension switch emulates two different tension adjustments of this adjust-
ment screw.
LO
The “LO” position emulates a loose tension adjustment. With this setting, re-
altime adjustments to the Echo Delay parameter have a faster slew rate, re-
sulting in “snappier” pitch shifting effects.
HI
The “HI” position emulates a tight tension adjustment. With this setting, real-
time adjustments to the Echo Delay parameter have a slower slew rate, result-
ing in “sluggish” pitch shifting effects.
Send The Send switch disables the signal sent into the echo portion of the
unit when set to OFF. This control is sometimes affectionately re-
ferred to as the “dub switch.”
UAD Powered Plug-Ins Manual - 158 - Chapter 14: EP-34 Classic Tape Echo
Sync This switch engages Sync mode for the plug-in. In Sync mode, delay
times are synchronized to (and therefore dependent upon) the mas-
ter tempo of the host application. When Sync is toggled, parameter
units are converted between milliseconds and beats to the closest matching
value.
See Chapter 8 in the UAD System Manual for more information about tempo
synchronization.
Wet The Wet switch puts the EP-34 into “100% Wet” mode. When Wet
is on, it mutes the dry unprocessed signal.
Note: Wet is a global (per plug-in instance) control. Its value is saved within
the host project/session file, but not within individual preset files.
Power Power determines whether the plug-in is active. This is useful for
comparing the processed settings to the original signal, or to by-
pass the plug-in to reduce the UAD DSP load (load is not reduced
if UAD-2 DSP LoadLock is enabled).
Note: The yellow LED in the Input Meter (page 157) is illuminated when the
plug-in is active.
UAD Powered Plug-Ins Manual - 159 - Chapter 14: EP-34 Classic Tape Echo
The EP-3 is the favored unit by guitarists, and EP-4 is the last unit that was re-
leased and has an improved feature set over its predecessors such as meter-
ing and tone controls making it even more useful as a mix tool. Some didn’t
like the EP-4 because of a noise reduction circuit that was added that was not
implemented correctly. Unfortunately in a production mistake, the circuit was
placed in across both the direct signal and the tape playback causing the dry
source signal sustain to be cut off prematurely. Most modded their units to re-
move the noise compressor, and Maestro quickly removed the compressor de-
sign from the design.
*EP-34 Tape Echo is not affiliated with, sponsored nor endorsed by any companies currently using
the Echoplex name. The EP-34 Tape Echo name, as well as the EP-3 and EP-4 model names, are
used solely to identify the classic effects emulated by Universal Audio’s product.
UAD Powered Plug-Ins Manual - 160 - Chapter 14: EP-34 Classic Tape Echo
CHAPTER 15
Originating from the late 1950’s, the design of the 670 uses a single
push/pull stage of amplification with an exceptionally high control voltage.
Tube limiters are unique in that they use tubes for gain reduction and not just
as amplifiers. The audio path is quite simple, and compression happens di-
rectly in the audio path, rather than sending out to a separate compression
circuit. The unit can be used as a limiter or compressor, depending upon per-
sonal taste and program material. It can go from a 2:1 ratio as a compressor
to a peak limiter with a 30:1 ratio. The unit can also be adjusted to operate
anywhere between these two extremes using the Threshold and DC Threshold
controls.
UAD Powered Plug-Ins Manual - 161 - Chapter 15: Fairchild Tube Limiter Collection
Fairchild Tube Limiter Collection Screenshots
UAD Powered Plug-Ins Manual - 162 - Chapter 15: Fairchild Tube Limiter Collection
Figure 55. The Fairchild 670 Legacy plug-in window
Fairchild Tube The Fairchild Tube Limiter Collection, introduced in UAD v7.4, includes two
Limiter plug-ins: Fairchild 660 and Fairchild 670.
Collection
Fairchild 660
The Fairchild 660 may be handy with mono sources, or when less control is
required via its simpler interface. The Fairchild 660 controls are identical to
one channel of the Fairchild 670.
UAD Powered Plug-Ins Manual - 163 - Chapter 15: Fairchild Tube Limiter Collection
Fairchild 670
Second-Generation Algorithms
Sonic Differences
Like the differences between the original Fairchild 660 and 670 hardware
units, the UAD models in the Fairchild Tube Limiter Collection offer variations
in threshold behaviors, total gain, input attenuation range, distortion amount,
distortion structure, program dependence, time constant subtleties and more.
These differences provides an expanded palette within the Fairchild sound.
Artist Presets
The Fairchild Tube Limiter Collection includes artist presets from prominent
Fairchild users. The artist presets are in the internal factory bank and are ac-
cessed via the host application’s preset menu.
The artist presets are also copied to disk by the UAD installer so they can be
used within Apollo’s Console application. These presets can be loaded using
the Settings menu in the UAD Toolbar (see “Using UAD Powered Plug-Ins” in
Chapter 7 of the UAD System Manual).
The Fairchild Tube Limiter Collection includes additional artist presets that are
not available in the internal factory bank. These additional presets can also
be accessed using the Settings menu in the UAD Toolbar.
Note: Presets created with the original Fairchild Legacy plug-in are incom-
patible with the newer Fairchild Tube Limiter Collection plug-ins.
Upsampling
The Fairchild Tube Limiter Collection plug-ins (but not the Fairchild 670 Leg-
acy) use an internal upsampling technique. The upsampling results in a
slightly larger latency than most other UAD plug-ins. See “Upsampled Plug-
Ins” on page 550 for more information.
UAD Powered Plug-Ins Manual - 164 - Chapter 15: Fairchild Tube Limiter Collection
Fairchild 670 The original version of the Fairchild 670 was released in January of 2004 for
Legacy the UAD-1 platform. To accommodate the limited DSP resources of the first-
generation UAD-1 hardware, the transformer and I/O distortion characteris-
tics were not modeled in this version of the plug-in.
The Fairchild 670 Legacy has a great sound and is very usable, especially in
situations where less distortion is desirable, or when there are not enough
DSP resources to use the second-generation models in the newer Fairchild
Tube Limiter Collection. It also has slightly less overall latency since it is not an
upsampled plug-in.
Note: The Fairchild 670 Legacy is included with the purchase of the Fairchild
Tube Limiter Collection if it is not already owned.
Unique Controls Controls in the UAD Fairchild plug-ins are original Fairchild hardware con-
trols with the following exceptions:
• The VU meter and the Meter Switch are re-purposed, enabling the ability to
monitor input and output levels (the original hardware does not have this
ability). In the hardware, the function of the meter switch is to enable cali-
brating the bias currents; this function is achieved automatically in the plug-
in when the Balance control is in the default position.
• The Headroom (HR) control replaces the VU meter’s Zero control, which
originally corrected for component wear offsets in the VU meter pin.
• The Sidechain Link control is a common modification which had been per-
formed on the unit we modeled.
• Output Level, Controls Link, Sidechain Filter, Mix, and Headroom controls
are digital-only additions for the UAD plug-ins.
• The D.C. Threshold controls are original controls, however on the Fairchild
660 they were located on the rear panel.
Note: Not all controls are available in the Fairchild 670 Legacy plug-in.
UAD Powered Plug-Ins Manual - 165 - Chapter 15: Fairchild Tube Limiter Collection
Lateral/Vertical One of the design goals of the Fairchild 670 hardware was to facilitate its use
as a limiter when producing vinyl phonograph masters. The terms lateral
(side-to-side) and vertical (up-and-down) refer to the mechanical modulations
in a vinyl record groove that are transduced into electrical audio signals by
the phonograph stylus and cartridge.
The Fairchild 670 can perform dynamics processing on the lateral (“Lat”) and
vertical (“Vert”) components of stereo signals independently. In other words,
the monophonic (middle) and/or stereo (side) components of a stereo source
signal can be compressed or limited separately from the other component.
Lat/Vert processing facilitates maximum usable levels and efficient use of
available groove space in phonograph mastering, resulting in higher volume
recordings with longer playing times. Of course, the feature can also be used
for creative effects outside of the phonograph environment.
Tip: Controls related to Lat/Vert processing contain red Lat/Vert text labels.
Operating Levels The Headroom (HR) control enables adjustment of the internal operating ref-
erence level for the Fairchild 670 and Fairchild 660. This feature enables
more sonic range and the ability to fine-tune the non-linear I/O distortion and
compression response characteristics to be tailored independently of signal
input levels.
UAD Powered Plug-Ins Manual - 166 - Chapter 15: Fairchild Tube Limiter Collection
Fairchild 670 Modes
2 Compressors, There are two independent compressors within the Fairchild 670. Depending
4 Modes on the state of the AGC Switch and the Sidechain Link switch, four operating
modes are possible. The modes are detailed in this section.
Modes Table The switch positions required for each operating mode is shown in Table 14
below. See “Lateral/Vertical” on page 166 for an overview of these terms.
Dual Mono In dual mono mode, the Fairchild 670 operates as two separate monophonic
compressors with independent control of the left and right channel signals.
There is no interaction between the two compressors.
Dual Lat/Vert In dual lateral/vertical mode the Fairchild 670 operates as two monophonic
compressors with independent control of the middle and side components of
the two input signals. The input signals are processed by the sum/difference
(mid/side) matrix before and after the compressors, but there is no interaction
between the two compressors.
Stereo In this mode, the Fairchild 670 operates as a typical stereo dynamics proces-
Left/Right sor. The left input is fed to the one compressor, and the right input is fed to the
other. The dynamics control signal sidechain of the two compressors are
linked so that they both compress the same amount at any instant, preventing
transients which appear on only one channel from shifting the stereo imaging
of the output.
Any transient above the threshold (on either channel) will cause both channels
to compress, and the amount of compression will be similar to the amount of
compression for a transient which appears on both channels at the same time.
Additionally, the attack and release times for the two compressors will be the
same, and attack and release behavior will be the average of the settings for
the two channels. Mono transients will have an effective attack time of about
one half the attack time for transients on only one of the two channels.
UAD Powered Plug-Ins Manual - 167 - Chapter 15: Fairchild Tube Limiter Collection
Stereo Lat/Vert Stereo lateral/vertical (mid/side) mode, like stereo left/right mode, causes
the two compressors to be linked together so that they always compress the
same amount. In this mode however, the inputs to the two compressors are fed
with the middle and side components of the signal respectively. This generally
means that a transient which occurs in both channels will cause a bit more
compression than a transient which only appears on left or right. The attack
and release behavior is determined by the average of the settings for the two
channels.
Fairchild Controls
The control functions are essentially identical across all three UAD plug-ins in
the Fairchild family, so they are described only once. Any control differences
between the three plug-ins are noted in the control descriptions.
Power Switch This switch determines whether the plug-in is active. When the Power
switch is in the Off position, plug-in processing is disabled and UAD
DSP usage is reduced (unless UAD-2 DSP LoadLock is enabled).
Power Lamp
The lamp beneath the Power switch is illuminated when the plug-in is
active.
Tip: Click the Power Lamp to toggle the enable/disable state of the
plug-in.
VU Meters There are two VU meters, one for each channel. The
VU meters can display input levels, output levels, or
gain reduction levels, as determined by the Meter
Switch.
UAD Powered Plug-Ins Manual - 168 - Chapter 15: Fairchild Tube Limiter Collection
Meter Switch This switch determines what is displayed on the VU meters. In-
put, output, or gain reduction (“GR”) levels can be selected.
If the AGC Switch is set to left/right, the GR shown will be for the
left or right channel. If the AGC switch is set to Lat/Vert, the GR
shown will be for the middle (upper meter) or side (lower meter)
channel. In GR mode, the upper labels show gain reduction in dB.
If the meter select switch is set to IN or OUT, then that meter will reflect the rel-
ative level of the right or left input or output signal (the I/O meters are not cal-
ibrated).
Fairchild 670
Fairchild 660
Note: Like the 660 hardware, there is some signal leakage even when Input
Gain is set to -Inf.
The available range is –20 to 0 dB with a default value of –18 dB (unity gain).
UAD Powered Plug-Ins Manual - 169 - Chapter 15: Fairchild Tube Limiter Collection
Input Gain versus Threshold
The amount of signal compression is determined by both the Input Gain and
Threshold controls. If one is increased and the other decreased, the compres-
sion characteristics won’t change much, but the distortion characteristics will.
The input control is located ahead of the tubes, directly “behind” the input
transformer. Therefore as the input control is increased, the input tube (the
gain-varying stage) is hit with more signal which can increase distortion
(which may or may not be desirable).
Tip: For less distortion with the same amount of compression, lower the input
gain and increase the threshold control.
Time Constant This 6-position switch provides fixed and variable time con-
stants (attack and release times) to accommodate various types
of program material. Positions 1-4 provide successively slower
behavior, and 5 and 6 provide program dependent response.
Tip: When Sidechain Link is enabled and Controls Link is disabled, the Time
Constant settings of the two channels are interactive, which enables the ability
to have many other attack/release variations than those listed in the table.
UAD Powered Plug-Ins Manual - 170 - Chapter 15: Fairchild Tube Limiter Collection
AGC Switch This switch determines whether the two compression chan-
nels will receive left/right or lateral/vertical (mid/side) sig-
nals as the inputs.
Sidechain Link When this control is set to Link, it causes the two channels of the com-
pressor to compress in equal amounts. This does not mean that the
compressor will be equally sensitive to either channel however; that
depends on the settings of the other controls.
Linking the sidechains simply means that the instantaneous amount of com-
pression for the two channels will always be the same, thereby preventing left-
right image shifting at the output. Threshold and input gains can be set inde-
pendently to cause the compressor to be more sensitive to instruments which
are panned to one side or the other. Output controls can be set separately in
order to correct an overall image shift at the output.
Tip: In conjunction with the AGC Switch switch, the Sidechain Link switch de-
termines the operating mode of the Fairchild 670.
Controls Link This switch allows the two sets of controls for the interface to be ste-
reo linked. The control is unavailable on the Fairchild 660.
UAD Powered Plug-Ins Manual - 171 - Chapter 15: Fairchild Tube Limiter Collection
Headroom Overview
The Fairchild hardware units can accept an analog signal level of approxi-
mately +27 dBm before undesirable signal clipping occurs. As the signal in-
creases up to this point however, desirable audio-path nonlinearities and
“good” harmonic distortion characteristics occur. This musically pleasing
“warmth” at higher levels is what gives the unit much of its revered sonic char-
acter. Because analog mixing consoles can typically output high signal levels,
audio engineers often take advantage of the ability to “push” the hardware
unit into the colorful arena.
This complete pallet of sonic nuance, including the dynamic input response,
is captured in the Fairchild Tube Limiter Collection models (but not the Fair-
child 670 Legacy). The 660 and 670 plug-ins are calibrated internally so that
when the Headroom control is at its nominal value of 16 dB, 0 dBFS at their
input is equivalent to an input level of approximately +20 dBu on the hard-
ware, where the coloring is more prominent. The result is that a typical signal
within a DAW will drive the UAD Fairchild 660/670 into these “virtual”
higher levels, resulting in fairly high amounts gain reduction.
Headroom Control
Note: There is only one headroom parameter. Although the HR control ap-
pears twice in the Fairchild 670 window, they are permanently linked.
Headroom can be set (in dB) to 4, 8, 12, 16, 20, 24, or 28. The default value
is 16 dB (when the set screw “dot” is in the straight up 12 o’clock position).
Note that Headroom is increased as the dB value decreases.
Tip: Click the “HR” text label to return the control to the default value.
At higher dB values (clockwise rotation), signals will push the plug-in into gain
reduction (and more non-linearity and “good” harmonic distortion color)
more easily. Set the control to a lower value (counter-clockwise rotation) when
less gain reduction and less color is desired.
Note: To avoid the temporary gain increases that can result when adjusting
Headroom, automating this control is not recommended.
UAD Powered Plug-Ins Manual - 172 - Chapter 15: Fairchild Tube Limiter Collection
Keep in mind there are no hard and fast headroom rules. Feel free to exper-
iment with the various positions of the HR control regardless of the audio
source. If it sounds good, use it!
Note: The HR control does not exist on the Fairchild 670 Legacy. On the
hardware unit, the Zero screw (as displayed in the Fairchild 670 Legacy) ad-
justed the meter pointer to compensate voltage fluctuation and component
wear.
Balance Balance controls the bias current balance. It always controls one
channel of the compressor, regardless of what the nearby Meter
Switch is set to. The point of perfectly calibrated bias currents is
achieved when the screw slot is at the 12 o’clock position (the de-
fault value). At this setting, the amount of additive signal deflection (“thud”)
which happens due to an attack is minimized. Setting this control counter-
clockwise from this position results in a thud of one polarity on transients, and
going clockwise produces a thud of opposite polarity.
Tip: Click the “BAL” text label to return the control to the default position.
Note: To avoid the DC settling artifacts that can result when adjusting Bal-
ance, automating this control is not recommended.
Sidechain Filter The Sidechain Filters (one each for the Left/Lat and
Right/Vert channels) control the cutoff frequency of
a low-cut filter on the compressor's control signal
sidechain. They have a slope of 12 dB per octave.
The available range is 20 Hz to 500 Hz, and Off.
The default value is Off.
UAD Powered Plug-Ins Manual - 173 - Chapter 15: Fairchild Tube Limiter Collection
DC Threshold DC Threshold controls the ratio of compression
as well as the knee width. As the knob is turned
clockwise, the ratio gets lower and the knee gets
broader. The threshold also gets lower as the
knob is turned clockwise.
CAL
To calibrate the plug-in to factory specifications (the default value), align the
white “CAL” mark with the black “dot” on the adjustment screw.
Tip: Click the “CAL” text label to return the control to the factory calibrated
position.
OWR
To calibrate the plug-in to the setting used by Ocean Way Recording (the
source unit for the plug-in modeling), align the white “OWR” mark with the
black “dot” on the adjustment screw.
Tip: Click the “OWR” text label to return the control to the Ocean Way Re-
cording position.
Note: In the Fairchild 670 Legacy this is a stepped control, with each step
being separated by 0.5 dB, and an available range of -18 dB to +6 dB.
UAD Powered Plug-Ins Manual - 174 - Chapter 15: Fairchild Tube Limiter Collection
Mix The output balance between the signal processed by the plug-
in and the original dry source signal can be adjusted with the
Mix control. Mix facilitates parallel compression techniques
without having to create additional routings in the DAW.
Tip: Click the “MIX” text label to set the control to the 50% position. Click the
“0” text label to set the control to the minimum position. Click the “100%” text
label to set the control to the maximum position.
UAD Powered Plug-Ins Manual - 175 - Chapter 15: Fairchild Tube Limiter Collection
Historical Background
The origins of the Fairchild 660/670 design come from Estonian-born immi-
grant Rein Narma. Les Paul hired Narma to modify his first 8-track Ampex ma-
chine. Later, Narma built consoles for Olmsted Recording, Rudy Van Gelder,
and Les Paul, who then asked him to build an all-new, sonically reliable audio
limiter. In the post-war years, this refugee from Soviet Russia worked for the
U.S. Army as a broadcast/recording tech during the Nuremberg trials, then
later immigrated to the New York and took a job at Gotham Recording.
Narma and others founded Gotham Audio Developments to build recording
gear.
The compressor’s Fairchild connection begins with Sherman Fairchild, the son
of Congressman George Winthrop Fairchild, one of the founders of IBM.
Sherman Fairchild built and designed the first aerial photography equipment
during World War I. After that war ended, he started the Fairchild Aerial
Camera Corporation in 1920. Sherman Fairchild eventually went on to de-
sign a multitude of products, from aircraft to semiconductors, and opened sev-
eral more companies, including Fairchild Recording Equipment Corporation.
After Narma began the limiter project for Les Paul, Sherman Fairchild heard
about it, licensed the design, and hired Narma as the company’s chief engi-
neer. After his time at Fairchild, Narma moved to Northern California and
was a vice-president at Ampex. The Fairchild was advertised as “The World
Accepted Standard for Level Control” back in the 1950s when it was origi-
nally sold. It is still revered for its extremely smooth, artifact-free sound.
UAD Powered Plug-Ins Manual - 176 - Chapter 15: Fairchild Tube Limiter Collection
The Fairchild 660 and 670 Original Hardware
UAD Powered Plug-Ins Manual - 177 - Chapter 15: Fairchild Tube Limiter Collection
CHAPTER 16
Harrison 32C EQ
Overview
The Harrison 32C is the EQ channel module from the prestigious Harrison
4032 console. Countless hit records have been made with Harrison consoles,
with artists from Abba to Sade. Most notably, the 4032 is famous as the mixer
from which many Michael Jackson records including Thriller—the best-selling
album of all time—were made. An original 4032 still resides in Florida with
Thriller engineer and Bill Putnam protégé Bruce Swedien, where he continues
his love affair with the desk he calls “marvelous sounding.” Universal Audio’s
plug-in version of the all-important 32C EQ module is measured from Mr.
Swedien’s personal console. This colorful 4-band EQ with high and low cut fil-
ters will impart the same “warm and rich sound” from his Harrison, and will
impart the same “impact, sonic clarity and creativity” as he experienced mak-
ing some of the best-loved records of our time.
The Harrison 32C contains four overlapping parametric peaking bands. Each
band has fully sweepable Frequency and Gain controls. Instead of traditional
Q controls, the 32C has special circuitry that, according to the original hard-
ware documentation, “automatically adjusts the effective bandwidth under all
conditions.” This dynamic property, and the interplay between the overlap-
ping bands, contribute to the device’s musicality and unique sonic signature.
The low EQ band can be switched from peak to shelf mode, and high/low
pass filters are available. Additional “digital only” features not included on
the original hardware include gain, phase invert, and a global power switch.
An SE version is also provided for higher instance counts.
Power The Power switch determines whether the plug-in is active. Click the
button to toggle the state. When the Power switch is in the Off
(lighter) position, plug-in processing is disabled and UAD DSP us-
age is reduced (unless UAD-2 DSP LoadLock is enabled).
Power LED The Power LED is illuminated when the plug-in is active.
Phase The Phase (Ø) button inverts the polarity of the signal. The signal is
inverted when the button is engaged (darker). Leave the button in-
active (lighter) for normal phase.
Cut Enable
The Cut Enable “In” switch is to the left of the EQ “In” switch on the graphical
interface.
This control determines the cutoff frequency for the high pass filter. The avail-
able range is 25 Hz to 3.15 kHz.
This control determines the cutoff frequency for the low pass filter. The avail-
able range is 1.6 kHz to 20 kHz.
Low Peak The low EQ band can be operated in either peak or shelf mode.
When the Low Peak switch is in the “out” position, the low EQ band
operates in shelf mode. When the Low Peak switch is engaged
(darker), the low EQ band operates in peak mode (the other bands
always operate in peak mode).
Low Frequency This control determines the low band center frequency (or the edge frequency
when in shelf mode) to be boosted or attenuated by the band Gain setting.
The available range is 40 Hz to 600 Hz.
Low Gain This control determines the amount by which the frequency setting for the low
band is boosted or attenuated. The available range is ±10 dB.
Low Mid This control determines the low midrange band center frequency to be
Frequency boosted or attenuated by the band Gain setting. The available range is 200
Hz to 3.1kHz.
Low Mid Gain This control determines the amount by which the frequency setting for the low
midrange band is boosted or attenuated. The available range is ±10 dB.
High Mid This control determines the low midrange band center frequency to be
Frequency boosted or attenuated by the band Gain setting. The available range is 400
Hz to 6 kHz.
High Mid Gain This control determines the amount by which the frequency setting for the high
midrange band is boosted or attenuated. The available range is ±10 dB.
Hi Frequency This control determines the high band center frequency to be boosted or at-
tenuated by the band Gain setting. The available range is 900 Hz to 13 kHz.
Harrison 32C SE
Overview The UAD Harrison 32C SE is derived from the UAD Harrison 32C. Its algo-
rithm has been revised in order to provide sonic characteristics very similar to
the Harrison 32C but with significantly less DSP usage. It is provided to allow
Harrison-like sound when DSP resources are limited. Nobody with “golden
ears” will say it sounds exactly like the full version, but it still sounds great and
is very usable in most situations.
The Harrison 32C SE interface can be differentiated from the Harrison 32C
by knob color and the module name. The Harrison 32C SE blue knobs instead
of the Harrison 32C’s ivory knobs, and the module name on the upper right
of the interface panel includes “SE.”
Harrison 32C SE The Harrison 32C SE controls are exactly the same as the Harrison 32C.
Controls Please refer to the Harrison 32C section for Harrison 32C SE control descrip-
tions (see “Harrison 32C EQ and Harrison 32C SE Controls” on page 179).
The Harrison 32C SE does not require additional latency compensation be-
cause it is not upsampled.
Note: Compensating for Harrison 32C is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
Special thanks to Bruce Swedien for his gracious cooperation with the UAD Harrison 32C project.
Overview
Helios consoles were used to record and mix some of the finest rock, pop and
reggae classics ever produced. The Beatles, Led Zeppelin, The Rolling Stones,
The Who, Roxy Music, Queen, Jimi Hendrix and Bob Marley are just a few
that recorded with these amazing wrap-around consoles. Moreover, many
great musicians of the era purchased Helios consoles for their personal use.
Of all the Helios consoles produced between 1969 and 1979, the original
“Type 69” is considered the most musical. Universal Audio modeled the EQ
section of the very first Type 69. This console was originally found at Island’s
Basing Street Studio in London; it now resides with Jason Carmer in Berkeley,
California, where it continues to record multi-platinum albums.
UAD Powered Plug-Ins Manual - 183 - Chapter 17: Helios Type 69 Equalizer
Helios Type 69 Controls
Overview The simple yet powerful Helios Type 69 Passive EQ adds a unique sonic tex-
ture to the music that passes through it. It can be pushed to its most extreme
boost settings while retaining openness and clarity. The Type 69 Passive EQ
replicates all the controls of the original hardware. The Treble band is a fixed
10 kHz shelf EQ, while the Bass band functions as a stepped 50 Hz shelf filter
(-3,-6,-9,-12,-15 dB) or frequency selectable Peak EQ (60, 100, 200, 300
Hz). The Mid band operates as a frequency selectable Peak or Trough
(Notch) EQ with eight frequencies (.7, 1, 1.4, 2, 2.8, 3.5, 4.5, 6 kHz). Other
features include Level Adjust, EQ Cut (bypassing the EQ circuit while retain-
ing the native sound of the unit), and Phase Reverse.
Band Layout
The Helios Type 69 design works in such a way that (depending on the set-
tings) entire EQ circuits are switched in and out. In the hardware that often
meant audible popping. For the plug-in we use smoothing to reduce these au-
dio spikes, but they may be more audible than with other UAD plugs-ins. This
is most audible when engaging the Bass or 10 kHz band from OFF to any
other setting.
UAD Powered Plug-Ins Manual - 184 - Chapter 17: Helios Type 69 Equalizer
Bass The Bass knob has a dual purpose. It specifies the amount
of attenuation when the low band is in shelving mode, and
specifies the frequency of the low frequency peak filter
when the Bass Gain knob is not zero.
When this knob is set to one of the decibel values (–3, –6, –9, –12, –15 dB)
the low band is in “bass cut” shelving mode with a set frequency of 50 Hz.
Note: Like the original hardware, simply putting this control on any frequency
will yield approximately 3.5 dB in gain increase even if the Bass Gain control
is set to 0.
Bass Gain The Bass Gain knob determines the amount of low band gain
to be applied when the Bass knob is in one of the frequency
positions. Up to +15 dB of boost is available.
Mid Freq This control determines the frequency of the midrange band.
The following frequencies can be specified: 700 Hz, 1 kHz,
1.4 kHz, 2 kHz, 2.8 kHz, 3.5 kHz, 4.5 kHz, and 6 kHz.
Note: The gain for the mid band is determined by the Mid
Gain control. MidFreq has no effect if the Mid Gain control
is set to zero.
UAD Powered Plug-Ins Manual - 185 - Chapter 17: Helios Type 69 Equalizer
Note: Whether gain or attenuation is applied is determined by the Mid Type
control.
Mid Type Mid Type specifies whether the midrange band is in Peak or Trough
mode. When switched to Peak, the Mid Gain control will boost the
midrange. When switched to Trough, Mid Gain will cut the midrange.
Note: When using Trough, a 1 dB loss occurs on the overall output of the plug-
in. This is normal; the behavior is the same in the original hardware.
High Shelf Gain The High Shelf Gain knob offers fixed frequency shelving
equalization at 10 kHz. This stepped control can cut the tre-
ble by –3 dB or –6 dB, or boost it in 2 dB increments up to
+16 dB.
The EQ is bypassed when in the “out” (down) position. EqCut does not re-
duce UAD DSP load.
In the original Helios hardware, the audio is still slightly colored even when
the EQ switch is in the Cut position. This is due to the fact that the signal is
still passing through its circuitry. Because the plug-in emulates the hardware
in every regard, the signal will be slightly processed when this switch is in
the Cut position. If a true bypass is desired, use the Line switch instead.
Phase The Phase (Ø) switch inverts the polarity of the signal. When the switch
is in the “Inverted” (up) position, the phase is reversed. Leave the
switch in the “Normal” (down) position for normal phase.
Level Adjust This control adjusts the signal output level of Helios Type 69.
This may be necessary if the signal is dramatically boosted or
reduced by the EQ settings. The available range is –20 dB to
+10 dB.
Line The Line switch determines whether the plug-in is active. This is use-
ful for comparing the processed settings to the original signal, or to
bypass the plug-in to reduce the UAD DSP load (load is not re-
UAD Powered Plug-Ins Manual - 186 - Chapter 17: Helios Type 69 Equalizer
duced if UAD-2 DSP LoadLock is enabled).
Click the switch to toggle the state; the switch is illuminated in green when
the plug-in is active.
Helios 69 Latency
The Helios 69 uses an internal upsampling technique to facilitate its amazing
sonic quality. This upsampling results in a slightly larger latency than other
UAD plug-ins. See See “Upsampled Plug-Ins” on page 550. for more informa-
tion.
Note: Compensating for Helios 69 is not required if the host application sup-
ports full plug-in delay compensation throughout the signal path, or when it is
used only on the outputs.
UAD Powered Plug-Ins Manual - 187 - Chapter 17: Helios Type 69 Equalizer
Basing Street—Home of the original Type 69 Helios desk
UAD Powered Plug-Ins Manual - 188 - Chapter 17: Helios Type 69 Equalizer
CHAPTER 18
The Ibanez Tube Screamer has inspired hundreds of knock-offs and vintage
units command insane prices. Now, for the first time, you can track through
the only Ibanez-licensed TS808 emulation with the Ibanez Tube Screamer
TS808 for UAD-2 and Apollo interfaces.
Dynamic The Ibanez Tube Screamer TS808 for UAD-2 and Apollo nails every detail of
Distortions this vintage grind machine, allowing guitarists of all styles a vast array of
sounds at tracking or mixdown. Key to this is capturing the original's unique
circuit, which actually mixes the clean input signal with the output signal of the
TS808's clipping circuit — preserving your playing dynamics and actually im-
proving clarity and responsiveness.
UAD Powered Plug-Ins Manual - 189 - Chapter 18: Ibanez Tube Screamer TS808
From Subtle No matter what type of guitar you're using, the TS808 plug-in can transform
Rhythms to your tones with its signature character. Use it to add a touch of dirt to ringing
Searing Solos
chords, enhancing your guitar's string-to-string separation, or crank the Level
and Drive controls to unleash the TS808's legendary creamy, singing
midrange. You can also call on the TS808 plug-in to deliver chunky rhythm
tones à la Keith Richards.
Unison The interaction of your instrument and the first pedal in your signal chain is an
Technology for essential ingredient to capturing a stompbox’s unique character and tone.
Authentic Tube
Screamer Tones Thanks to Universal Audio’s Unison technology, your guitar gets the same cir-
cuit interaction, gain range, and clip points of a vintage Tube Screamer when
you plug in to an Apollo Twin, DUO, or QUAD. This gives you the true tone,
feel, and response of the original hardware.
An Essential Creative producers and engineers have employed the Ibanez TS808 in myr-
Tone Stage for iad ways. Producer/engineer Andy Sneap (Megadeth, Kreator, Exodus) runs
Tracking and
Mixing a TS808 in front of an amp to lean-out the bass response and add teeth, while
Joe Barresi (The Melvins, Tool, Weezer, and Bad Religion) uses a vintage
TS808 at mixdown to add texture and distortion to already-tracked guitars,
synths, drums, and vocals. The Ibanez Tube Screamer TS808 for UAD-2 and
Apollo allows you to do the same thing, effortlessly in your DAW.
UAD Powered Plug-Ins Manual - 190 - Chapter 18: Ibanez Tube Screamer TS808
Ibanez Tube Screamer Screenshot
UAD Powered Plug-Ins Manual - 191 - Chapter 18: Ibanez Tube Screamer TS808
Using Ibanez Tube Screamer
Standard DAW In much the same way as some premier recording and mix engineers use
Inserts stomp boxes in a mix, Ibanez Tube Screamer can be used for creative pur-
poses on any source signal by placing it in any plug-in insert within a DAW.
For typical guitar tones, follow the pedal with a guitar amp emulation (as one
would with a hardware guitar pedal and amp).
Note: Since Hi-Z devices typically operate at much lower signal levels than
line-level devices, signal levels being routed into the pedal may need to be re-
duced to avoid undesirable input distortion.
Unison™ The Ibanez Tube Screamer features Unison technology for integra-
Technology with tion with the high-impedance input hardware in Universal Audio’s
Apollo
Apollo audio interfaces. With Unison, Apollo’s Hi-Z inputs inherit all
of the unique circuit interaction, gain range, and clip points of the original
guitar pedal.
For the most authentic stompbox tones, plug any high-impedance instrument
(guitar, bass, etc.) into Apollo’s Hi-Z instrument input and place the pedal
plug-in into the unique Unison INPUT insert on the same channel within
Apollo’s Console application. If desired, follow the Unison pedal plug-in with
another pedal or guitar amp emulation in Console’s standard insert slots.
This Hi-Z workflow enables near-zero latency monitoring or recording with the
same input characteristics and dynamic response as the original pedal.
Note: This plug-in can be Unison-enabled with Apollo’s Mic or Line inputs.
However, because the original hardware has a high-impedance instrument
input only, Apollo’s Hi-Z input and Unison insert will provide the most accu-
rate sound and experience of the hardware pedal that is modeled.
Important: Unison is active only when the pedal plug-in is placed in the
unique INPUT insert available on Hi-Z inputs within Apollo’s Console applica-
tion. For complete Unison details, see the Apollo Software Manual.
UAD Powered Plug-Ins Manual - 192 - Chapter 18: Ibanez Tube Screamer TS808
Tactile Control
Apollo’s front panel preamp knob can independently adjust the Overdrive,
Level, and Output controls available within the Unison pedal plug-in via Gain
Stage Mode. The control being adjusted can be remotely switched via
Apollo, so the control levels and their associated colorations can be tuned
from the hardware knob for precise physical tactile control, all without using
the Unison plug-in’s software interface.
Overdrive Overdrive varies the amount of signal distortion. Rotate the control
clockwise to increase overdrive and sustain.
Tone Tone adjusts the high-frequency content of the signal. Rotate the
control clockwise to decrease the filter amount, which increases
treble content.
Level Level adjusts the pedal's modeled output level. Rotate the control
clockwise to increase the volume.
Bypass The stomp switch toggles the overdrive effect. When the effect
is active, the red LED (above the Tone knob) glows.
Output Output controls the clean (unmodeled) gain at the output of the
plug-in. The available range is -24 dB to +12 dB.
Tip: Click the “0” label to return the control to zero dB.
UAD Powered Plug-Ins Manual - 193 - Chapter 18: Ibanez Tube Screamer TS808
Power The UA diamond logo switch toggles between plug-in enable and
disable (true bypass). Click the switch to toggle the Power state.
When Power is off, the UA diamond logo is dim and the external
power supply cable is unplugged.
All visual and aural references to the Ibanez Tube Screamer TS808 and all use of
Ibanez’s trademarks are being made with written permission from Ibanez.
UAD Powered Plug-Ins Manual - 194 - Chapter 18: Ibanez Tube Screamer TS808
CHAPTER 19-
LA-3A Compressor
Overview
The original Teletronix LA-3A Audio Leveler made its debut at the 1969 New
York AES show. Marking a departure from the tube design of the LA-2A Lev-
eling Amplifier, the solid-state LA-3A offered a new sound in optical gain re-
duction, with faster attack and release characteristics that were noticeably dif-
ferent from its predecessor. Immediately embraced as a studio workhorse, the
LA-3A is still widely used today. Engineers and producers the world over fa-
vor the LA-3A for its unique compression characteristics and sonic signature.
Modeled from a unit in UA's vintage collection, our digital emulation of the
LA-3A faithfully captures the hardware's sound, working magic on vocals,
guitars and drums.
LA-3A Screenshot
Background For detailed information about compressors, see “The LA-2 captures one of
the earliest Teletronix examples. This exceedingly rare unit preceded the LA-
2A by a few years and incredibly, still has the original T4A fully intact. The LA-
2 provides the slowest response and a unique “mellowed” sound due to 50
years of luminescent panel aging inside the T4 module. Use the LA-2 with le-
gato tempos and your most vowel-like sources for a transparency and sublime
mood unlike any other compressor.” on page 505.
Comp/Lim This switch changes the characteristics of the compressor I/O curve. When
set to Compress, the curve is more gentle, and presents a low compression ra-
tio. When set to Limit, a higher compression ratio is used.
Gain The Gain knob adjusts the output level (by up to 50 dB). Make sure to adjust
the Gain control after the desired amount of compression is achieved with the
Peak Reduction control. The Gain control does not affect the amount of com-
pression.
Peak Reduction This control adjusts the amount of gain reduction, as well as the relative
threshold. A Peak Reduction value of 0 yields no compression. Rotate this con-
trol clockwise until the desired amount of compression is achieved (to monitor
the Peak Reduction, set the VU Meter to Gain Reduction). The Peak Reduction
should be adjusted independently of the Gain control.
Meter This switch sets the mode of the VU Meter and also disables the plug-in. When
set to Gain Reduction, the VU Meter indicates the Gain Reduction level in dB.
When set to output, the VU Meter represents the output level (the output meter
is not calibrated).
When in the Off position, the plug-in is disabled and UAD DSP usage is re-
duced.
Note: (UAD-2 only) UAD-2 DSP usage is reduced only when DSP LoadLock is
disabled. If DSP LoadLock is enabled (the default setting), setting the switch to
Off will not reduce DSP usage.
Stereo Phase-coherent stereo imaging is maintained when the LA-3A plug-in is used
Operation on a stereo signal.
Lexicon 224
The result of using the very same algorithms and control processor code from
the original hardware, the UAD-2 Lexicon 224 precisely captures all eight re-
verb programs and the chorus program — based on the Lexicon 224's final
and hard-to-find firmware version 4.4. In UA's exhaustive modeling tradition,
the Lexicon 224 plug-in also incorporates the original unit's input transformers
and early AD/DA 12-bit gain stepping converters — nailing the entire analog
and digital circuit paths right down to the last detail.
Additionally, the Lexicon 224 emulation for UAD-2 features direct input and
presets from famous Lexicon 224 users, including Chuck Zwicky (Prince, Jeff
Beck), Eli Janney (Jet, Ryan Adams), David Isaac (Eric Clapton, Luther Van-
dross), E.T. Thorngren (Talking Heads, Bob Marley), and Kevin Killen (U2, Pe-
ter Gabriel).
For total authenticity, the UAD-2 only System Noise control enables or dis-
ables the inherent dynamic system noise of the original Lexicon 224 hard-
ware. Specifically, disabling System Noise enables a more modern (i.e.,
cleaner) sound, removing the modeled gain stepping, parameter zippering,
and quiescent noise. The unique Lexicon 224 Mode Enhancement and Decay
Optimization controls improve reverb clarity. For insert use, the UAD-2 only
Dry/Wet and Solo parameters control the effect mix within the plug-in.
Clicking the “OPEN” text to the right of the display panel exposes several hid-
den controls, including Input/Output gain and Pitch Shift, and even a select-
able “Bug Fix” mode which enables/disables historical bugs fixes from the
Hall B and Chorus programs.
Taken together, the Lexicon 224 emulation for UAD-2 is the world’s most ex-
haustive and authentic model of a true studio classic.
All visual and aural references to Lexicon products and all use of Lexicon trademarks are being
made with written permission from Harman International Industries, Inc.
Graphical User The original Lexicon 224 consists of two hardware elements. The “main-
Interface frame” rack-mountable 4U chassis contains the power supply, circuitry, and
audio input/output connectors. The remote control unit has a display, buttons,
and sliders which control the 224 parameters and functionality. Some of
these buttons and sliders have dual and even triple functionality, which makes
using certain “buried” functions a tricky procedure.
The UAD Lexicon 224 interface resembles the appearance and functionality
of the original hardware remote control. Operation has been simplified how-
ever by reassigning the buried “shift” functions to the buttons that are no
longer necessary in a plug-in (such as managing saved programs). Additional
parameters are exposed by opening a panel cover.
Lexicon 224 The original Lexicon 224 hardware has “programs” that are defined by the
Programs firmware ROM (“Read-Only Memory” chip) installed in the unit. A Lexicon
224 “program” is comprised of a unique DSP algorithm and an initial set of
factory parameter values voiced by Lexicon. In modern terminology, these ini-
tial values would be called a “preset.”
Lexicon 224 version 4.4 firmware contains nine programs (the maximum
available for the unit), consisting of eight reverb programs and one chorus
program. Descriptions of the various programs can be found on page 214.
Lexicon 224 The active algorithm determines the inherent sonic character of the current
Algorithms program. Algorithms are changed by selecting a different program; the algo-
rithm cannot be changed within the same program.
Lexicon 224 v4.4 contains seven unique algorithms. All seven algorithms and
the nine factory programs have been authentically modeled in the UAD Lexi-
con 224 plug-in. There are more programs than algorithms because some
programs use the same algorithm. See “Program Descriptions” on page 214
for details.
Tip: For the inc/dec buttons (e.g., Reverb Diffusion), the value can be contin-
uously changed by holding the button down.
Lexicon 224 The six sliders control the main reverb parameters within a program. These
Sliders are the most obvious controls to reach for when fine-tuning a reverb program
to best suit the material at hand.
In P9 Chorus A, the first four sliders don’t control the labeled parameters. See
“P9 Chorus A” on page 215 for descriptions of the sliders in this program.
Tip: Clicking a slider “cap” will show its value in the Numerical Display.
Clicking the text label of any slider will return that slider to the default value
for the active program.
Inputs & The Lexicon 224 hardware has two inputs (see Mono/Stereo below), and
Outputs four discrete outputs, labeled as A, B, C, and D. Outputs A and C were de-
signed to be used as the main stereo left/right outputs. The other two outputs,
B and D, are implemented in some programs for use as quadraphonic reverb.
The UAD Lexicon 224 fully models the individual sonics of all four outputs
when available in the program algorithm. The alternate B and D outputs are
available via the Rear Outs control (page 208).
Note: The dry signal at the Lexicon 224 output is completely unprocessed.
Mono/Stereo The Lexicon 224 hardware has dual channel inputs (left and right) and is a
Operation true stereo processor. Like the hardware, when the UAD Lexicon 224 plug-in
is used in a stereo-in/stereo out configuration, the left and right channel sig-
nals are both processed.
Primary & The primary controls (those that are most typically used) are on the main “re-
Hidden Controls mote control” panel interface. Additional (less typically used) controls are
available in a hidden control panel. The hidden control panel (Figure 66 on
page 211) is accessed by clicking the “OPEN” text label to the right of the
Display Panel.
Parameter The parameter value ranges, default values, and availability of particular pa-
Ranges & rameters within a given program may vary depending on which program is
Default Values
active. Parameter ranges are listed in the individual control descriptions. De-
fault parameter values for each program are listed in Table 18 on page 216.
Display Panel The Lexicon 224 display panel (Figure 64 below) consists of four display el-
ements: Numerical Value, LED Value, Stereo Level Meters, and Overflow in-
dicator. Exactly what is displayed here is dependent on the parameter being
edited (if any) and the state of the Display Hold switch (page 213).
Numerical Value
Value LED
The Value LED shows the units of the numerical value being displayed for a
particular control. For parameters in the time domain, the “sec” (seconds) or
“ms” (milliseconds) LED is lit. For parameters in the frequency domain, the
“Hz” (Hertz) or “kHz” (kilohertz) LED is lit. For parameters that have no units
value (e.g., Dry/Wet Mix), the value LED does not illuminate.
LED Meters
The six-segment LED meters display the left and right signal input levels at the
Lexicon 224 analog-to-digital converters, which are fully modeled. The Meter
LEDs indicate levels at –24 dB, –18 dB, –12 dB, –6 dB, and 0 dB. When the
0 dB LED illuminates, input clipping has occurred.
Overflow LED
The Overflow LED illuminates when an arithmetic processor overflow has oc-
curred. Overflows can happen when loud signals are present at the input,
when reverb decay times are long, and/or when self-oscillation occurs. Un-
expected sonic artifacts and/or ringing can occur when the processor over-
flows.
Program The Program buttons (Figure 65) are used to specify which of the nine default
Lexicon programs, and its associated algorithm, is active. See “Lexicon 224
Programs” on page 200 for an overview.
Eight reverb programs and one chorus program are available. Click a reverb
program button 1 – 8 to select that program. To select the chorus program,
shift+click any program button, or click the CLK=CHORUS text label. The pro-
gram button LED indicates which program is active except in chorus mode,
when all eight program button LEDs are illuminated.
Reverb Time Reverb Time is the duration of the decay of the reverberant sound (the “reverb
tail”). The reverb tail time is separated into two frequency component bands,
Bass and Mid. The separation frequency of the two bands is defined by the
Crossover control.
This control works in conjunction with the Crossover parameter, which defines
the range of the bass frequencies affected by the Bass control. Therefore ad-
justing Bass may have little audible effect if Crossover is set to a very low
value.
Mid The Mid slider defines the reverb decay time for the frequencies above the
Crossover value. Higher Mid values result in longer high frequency decay
times (when Crossover is not set too high). The Mid reverb decay value, in
seconds, is shown in the Numerical Display. The available range is 0.6 sec-
onds to 70 seconds.
Mid works in conjunction with the Crossover parameter, which defines the
range of high frequencies affected by the Mid control. Therefore adjusting
Mid may have little audible effect if Crossover is set to a very high value.
Mid is a slightly misleading label, because this control actually affects the re-
verb decay for all frequencies above the Crossover value (not just the
midrange). However, because the “highs” in the reverb can be rolled off with
the Treble Decay control (and usually are), the midrange frequencies are of-
ten more prominent than a full-range tail.
Crossover This control defines the crossover frequency (the split point) between the bass
and upper frequency bands in the reverb tail. Higher Crossover values make
the Bass parameter control a wider range of frequencies. Conversely, lower
values make the Mid parameter control a wider range of frequencies. The
available range is 100 Hz to 10.9 kHz.
Crossover affects the reverb decay because it works in conjunction with the
Bass and Mid reverb time parameters, which both define the length of the re-
verb tail (one control for each frequency band). If those parameters are set to
very short times, the result of adjusting Crossover may be very subtle.
Note: Crossover will have no apparent effect if Bass and Mid are set to the
same value.
Tip: Treble Decay adjusts the AMOUNT of reverb tail highs, while Mid ad-
justs the TIME.
Depth Depth sets the apparent distance between a source and its reverb, much like
the positioning of microphones in an echo chamber. As the value is in-
creased, the apparent distance from the source increases. The available
range is 0 – 71, with zero being “close” and 71 being “far” (the numbers are
arbitrary). The default value is program dependent.
Click the left (“<“) decrement button to decrease the Diffusion value; click the
right (“>”) increment button to increase the value. The available range is 0 –
63 (the numbers are arbitrary). The default value is program dependent;
Table 18 on page 216 lists the default values for each program.
Zero is the least dense setting. Density increases as the Diffusion value is in-
creased, but setting Diffusion higher than 40 can actually sound less dense.
The fastest density buildup is achieved with Diffusion values near the middle
of the range (approximately 32-37).
Predelay Predelay produces a short delay between the sound source and the onset of
reverberation. Higher Predelay values increase the time before reverb onset.
The range of this parameter varies depending on the active program; see
Table 16 on page 207 for the available values. The default value is program
dependent.
The default Immediate value is OFF. Immediate affects the following parame-
ters: Bass, Mid, Crossover, Treble Decay, Depth, Predelay, Diffusion, Mode
Enhancement, Pitch Shift, Decay Optimization, and Rear Outs.
System Noise This UAD-only control enables or disables the modeled inherent dy-
namic system noise of the original Lexicon 224 hardware. Disabling
System Noise enables a more modern-sounding (i.e., cleaner) 224.
Click the button to toggle the state; System Noise is active when the
button LED is lit. The default state is ON.
The elements of the modeled System Noise include quantization effects (at in-
put A/D, output D/A, and within the algorithm), zipper/stepping noise when
adjusting parameters, transformer distortion, and the quiescent noise floor.
Note: System Noise is a global (per instance) parameter; its state does not
change when different programs are selected.
Rear Outs The Rear Outs control is available to select the alternate pair when
the algorithm has alternate sonics at outputs B and D. See “Inputs &
Outputs” on page 201 for an overview of the hardware implemen-
tation.
Mode Enhancement is factory-optimized for each program and should not re-
quire adjustment in typical use. For this reason, it was deliberately made dif-
ficult to access in the original hardware. However, creative use of the param-
eter is encouraged by making it easier to access in the plug-in.
Mode Enhancement has three control elements: Enable, Amount, and Pitch
Shift. As in the original hardware, lower values of Mode Enhance Amount
and higher values of Pitch Shift increase “movement” and make the result
more prominent.
Note: The Mode Enhance Amount and Pitch Shift controls have no effect un-
less the Mode Enhance Enable control is active.
Mode Enhance This button enables or disables Mode Enhancement for the active
Enable program. Mode Enhancement is active when the button LED is lit.
The default state is ON for all programs.
Tip: This control, just as with the original hardware, resets the algo-
rithm. Therefore Mode Enhance Enable can be used to quickly “kill”
the reverb tail while staying in the same program.
Mode Enhance These two adjacent buttons control the amount of Mode
Amount Enhancement, or technically speaking, the amount of
time between delay line updates. Click the left (“<“) but-
ton to decrement the value; click the right (“>”) button to
increment the value. The available range is 1 through
16. Lower values increase the effect.
Decay Decay Optimization improves the Lexicon 224 reverb clarity and naturalness
Optimization by dynamically reducing reverb diffusion and coloration in response to input
signal levels. However, if set too high, it can make the decay less even. Decay
Optimization has two control elements: Enable and Amount.
Decay Optimization is factory-optimized for each program and should not re-
quire adjustment in typical use. For this reason, it was deliberately made dif-
ficult to access in the original hardware. However, creative use of the param-
eter is encouraged by making it easier to access in the plug-in.
Decay Optimize This button enables Decay Optimization for the active program. De-
Enable cay Optimization is active when the button LED is lit. The default
state is ON.
Decay Optimize These two adjacent buttons control the amount of Decay
Amount Optimization. Click the left (“<“) button to decrement
the value; click the right (“>”) button to increment the
value. The available range is 1 through 16. As in the
original hardware, lower values make the result more
prominent.
Note: The Decay Optimization Amount controls have no effect unless the De-
cay Optimization Enable control is active.
Mix Controls The Dry, Wet, and Solo parameters control the effect
mix in the plug-in. These controls are not available in
the original hardware.
Dry/Wet These two buttons control the balance between the reverb processor and the
source signal when Solo mode is inactive. Click the DRY button to reduce the
reverb amount; click the WET button to increase the reverb amount.
Clicking the DRY button once will decrement the value by one percent; click-
ing WET once will increment the value by one percent. To increase the fine
resolution when adjusting these controls, hold SHIFT (on the computer key-
board) when clicking the controls. Shift+click will decrement (DRY) and incre-
ment (WET) by a value of 0.1 percent instead of one percent.
The Dry/Wet controls are typically used when Lexicon 224 is inserted on in-
dividual channels. When Lexicon 224 is used on a group/bus in a typical re-
verb send/return configuration, set to 100% WET or activate SOLO mode.
Hidden Controls
Additional UAD controls are available in a hidden control panel. Refer to
Figure 66 in parameter descriptions.
Note: The last-used state of the Hidden Controls panel (open or closed) is re-
tained when a new Lexicon 224 plug-in is instantiated.
Pitch Shift Pitch Shift is a component of Mode Enhancement. See “Mode Enhance Pitch
Shift” on page 209 for parameter details.
Input Gain The independent left (“L”) and right (“R”) Input Gain parameters control the
signal levels at the input to the reverb processor. They do not affect the dry sig-
nal, so Input Gain can be used to adjust the wet/dry mix. The default value
is 0 dB. The available range is ±12 dB. The right channel control is unavail-
able when Lexicon 224 is used in a mono-in/mono-out configuration.
As signal levels into the Lexicon 224 increase, the analog and digital re-
sponse of the device becomes increasingly nonlinear. If signals are too high,
the Lexicon 224 A/D inputs and/or processor can overload, lighting the
Overflow LED and causing sonic artifacts. See “Overflow LED” on page 203
for more information.
Tip: Click the text label (“Input Gain”) to return the value of both channels to
zero.
Output Level The independent left (“L”) and right (“R”) Output Level parameters control the
signal levels at the output of the plug-in. The default value is 0 dB. The avail-
able range is – ∞ (infinite) dB to +12 dB. The right channel control is unavail-
able when Lexicon 224 is used in a mono-in/mono-out configuration.
Tip: Click the text label (“Output Level”) to return the value of both channels
to zero.
Link Link/unlink allows the left and right controls for Input Gain and Output
Level to be unlinked (non-ganged) in order to apply a different value
for each channel. Link is inactive when the LED is unlit. Click the Link LED to
toggle the state. The default state is ON.
When Link is active, automation data is written and read for the left channel
only. The automation for the left channel controls both channels in Link mode.
Note: When link is active, modifying the right channel parameters will have
no effect when changed from a control surface or when in “controls only”
(non-GUI) mode.
Bug Fixes The original Lexicon 224 code contains programming errors in the
Hall B and Chorus algorithms. These computer code bugs can cause
incorrect Bass decay times (Hall B programs) and undesirable “pops” and/or
“thumps” in the right channel (Chorus program) with certain source signals
and parameter configurations.
The bugs have been corrected in the UAD implementation of the plug-in, but
we have provided the option of using the original code for the sake of pure
authenticity.
The UA logo is actually a switch. When the UA logo is illuminated, the source
code bugs are fixed. The default state is ON. Click the UA logo to disable the
UA bug fixes and revert to the original hardware behavior.
Display Hold The Display Hold switch alters the behavior of the Numerical Display
(page 202). In the original hardware, the values of parameters that
are being modified are displayed for 3 seconds before reverting
back to displaying the average decay time.
The Hold switch changes this behavior. When set to infinite (“∞”), the Numer-
ical Display will continue to show the last modified parameter value. When
set to infinite and a program is changed, the average decay time is displayed
until a parameter is modified.
Note: The last-used state of the Display Hold parameter is retained when a
new Lexicon 224 plug-in is instantiated.
Power The Power switch is a bypass control. Click the switch to change the
Power state. When bypassed, plug-in processing is disabled, and the
Display Panel and all button LEDs are dimmed.
P1 Small Concert This program emulates the sound of a small concert hall, with moderate initial
Hall B density and moderately non-uniform decay. It is optimized for reverb times of
1.5 to 5 seconds (for longer decay times, P3 Large Concert Hall B is recom-
mended instead). The most natural sound is obtained when Bass and Mid are
relatively close to the same setting. This program uses the exact same algo-
rithm as P3 Large Concert Hall B.
P2 Vocal Plate This is a plate reverb emulation optimized for voice. It has low initial density
and coloration, resulting in a clear, bright sound. This program uses the exact
same algorithm as P5 Percussion Plate A, but with slightly different inherent
diffusion.
P3 Large Concert This program emulates the sound of a large concert hall, with low density and
Hall B minimal coloration. It is optimized for long reverb times. With percussive
sounds, increasing the diffusion value is recommended. This program uses the
exact same algorithm as P1 Small Concert Hall B.
P4 Acoustic This program sounds like a chamber, but with less initial density. It tends to
Chamber sound best with shorter reverb times (2 to 5 seconds). The most chamber-like
sound is obtained with Depth at a value of zero. Diffusion is preset in this pro-
gram and cannot be modified. Unlike all other Lexicon 224 programs, this al-
gorithm has monophonic input.
P5 Percussion This is a plate reverb emulation optimized for percussive sounds. It has high
Plate A initial density and coloration, and sounds best with shorter reverb times. This
program uses the exact same algorithm as P2 Vocal Plate, but with slightly dif-
ferent inherent diffusion.
P6 Small Concert This program is similar to P1 Small Concert Hall B, except it is brighter overall
Hall A and the Treble Decay control is more gentle. The original hardware manual
recommends equalizing this reverb return about +3 dB below 200 Hz to
“add to the richness and naturalness of the reverb.”
P7 Room A Program 7 is a room simulator with moderate to high initial density and low
to moderate coloration. It sounds great on speech and many types of music.
This program presents an especially wide output when used with a stereo in-
put source.
P9 Chorus A The Chorus A program is an eight-voice chorus with four voices on each ste-
reo channel. Each voice has a time delay which varies randomly and inde-
pendently, resulting in a thick, rich sound.
When Chorus is active, each of the first four sliders controls the gain level for
a stereo pair of voices. The sliders are linear faders, not log faders, so the de-
fault positions of all four sliders (about 1/2 way up) correspond to gains 6 dB
below maximum.
The first two voice pairs have overlapping delay ranges. Phasing/flanging ef-
fects can be achieved by setting their gains to similar levels. Phasing/flanging
can also be achieved (with a mono or centered input) when the left and right
channels are mixed together, such as when used in a mono-in/mono-out con-
figuration.
The Diffusion control is active in this program. Diffusion acts upon the third
and fourth pair of stereo voices, producing a cluster of tightly spaced echoes
whose shape is governed by the Diffusion control. The Lexicon 224 is one of
the few processors that has diffusion on chorus voices; this feature is a pri-
mary factor in its distinctive character.
Note: The Bass, Mid, Crossover, and Treble Decay behaviors are unavail-
able in P9 Chorus A. Instead, each of these sliders controls the level of a ste-
reo voice pair.
Default Table 18 below lists the default values of all available parameters for each
Parameter program.
Values
Lexicon 224 The Lexicon 224 uses an internal resampling technique to facilitate its sonic
Latency quality. This resampling results in a slightly larger latency than other UAD
plug-ins. See “Upsampled Plug-Ins” on page 550 for more information.
Overview
The Little Labs IBP Phase Alignment Tool easily eliminates the undesirable hol-
low comb-filtered sound when combining out-of-phase and partially
out-of-phase audio signals. Designed as a phase problem-solving device, the
award-winning Little Labs IBP (“In-Between Phase”) has established itself with
audio engineers as not only a “fix it” tool, but as a device for manipulating
audio phase as a creative, tonal color tool as well. Whether combining direct
and microphone signals, acoustic guitar and vocal mics, drum kit mics, or
multiple split-guitar amps, the recorded audio signal phase can be quickly
and easily controlled with the Little Labs IBP Phase Alignment Tool.
UAD Powered Plug-Ins Manual - 217 - Chapter 21: Little Labs IBP
Little Labs IBP Controls
All parameters are clearly labeled with control names. Please refer to
Figure 67 on page 217 for control descriptions.
Delay Adjust The Delay Adjust parameter is unique to Universal Audio’s “workstation” ver-
sion of the Little Labs IBP. Delay Adjust is a continuously variable control that
simply delays the input signal from 0.0 to 4.0 milliseconds.
Delay Adjust This switch bypasses the Delay Adjust parameter. Delay Adjust is bypassed
Bypass when the switch is engaged (darker).
Phase Adjust Phase Adjust is the main parameter in the Little Labs IBP. It is a continuously
variable control that shifts the phase of the input signal. The range of Phase
Adjust is either 90° or 180°, dependent on the Phase Adjust 90°/180°
switch.
The Little Labs IBP hardware is an all-analog device that uses analog allpass
filters to produce phase shifting. Allpass filters displace signals in time as a
function of frequency (they are frequency dependent). The modeled UAD ver-
sion accurately models the hardware along with all its idiosyncrasies.
Therefore phase shifting using the Phase Adjust knob is not “perfect” like
mathematically-manipulated signals in the digital domain. When Phase Ad-
just is set to 180° on one of two identical tracks side-by-side, the signals will
not cancel as you may expect.
Note: If a “standard” 180° phase shift is desired, use the Phase Invert switch.
If “digitally pure” frequency-independent phase shift is desired, use the Delay
Adjust parameter.
Phase Adjust This switch bypasses the Phase Adjust parameter. The signal phase is normal
Bypass when the switch is engaged (darker).
Phase Invert This switch inverts the polarity of the input signal, like the phase button on a
mixing console. Phase is inverted when the switch is engaged (darker).
UAD Powered Plug-Ins Manual - 218 - Chapter 21: Little Labs IBP
Phase Adjust This switch determines the range of the Phase Adjust parameter. This is useful
90°/180° when finer Phase Adjust resolution is desired.
When the switch is disengaged, the Phase Adjust range is 180°. When the
switch is engaged (darker), the Phase Adjust range is 90°.
Phase Center This switch sets the range of frequency emphasis. When the switch is disen-
Lo/Hi gaged (lighter), the Phase Center range is Hi. When the switch is engaged
(darker), the Phase Center range is Lo.
Note: Use of the 90°/180° and Lo/Hi parameters are typically used for in-
dividual tone signals such as a kick drum or toms as opposed to program ma-
terial.
Power This switch disables the plug-in. When the switch is disengaged, the plug-in is
bypassed. When the switch is engaged (darker), the plug-in is active and the
green LED is illuminated.
Note: Compensating for Little Labs IBP is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
UAD Powered Plug-Ins Manual - 219 - Chapter 21: Little Labs IBP
CHAPTER 22
One of the most important components of any good mix is blending the low
frequencies together in such a way that they don’t conflict. No matter what
style of music you make – from rock to reggae, to hip-hop to hardcore – few
tools are as easy to use and effective as the popular Little Labs VOG.
History Little Labs has a knack for creating problem-solving tools for the studio that
perform equally well as creative coloration effects and tone-boxes. The origi-
nal collaboration between UA and Little Labs saw the release of the UAD Little
Labs IBP plug-in — widely recognized as one of the most versatile phase cor-
rection plug-ins available today. Continued collaboration between Universal
Audio and Little Labs now provides another instant studio classic, the VOG.
Upon its introduction in 2009, owners of the hardware VOG quickly realized
multiple units are a must have — one for bass, kick drum, toms, low frequency
percussion, and especially vocals. Fortunately, with the Little Labs VOG
plug-in for the UAD-2, customers can have as many instances as they need to
make “the low end” come to life.
UAD Powered Plug-Ins Manual - 220 - Chapter 22: Little Labs VOG
Little Labs VOG Screenshot
Operational Overview
Two simple knobs allow you to dial in the VOG’s desired frequency and effect
amplitude. The center of the sweepable frequency range is selected via two
push-buttons of 40 Hz and 100 Hz, or you can set the center to 200 Hz by
pressing both buttons simultaneously. Everything below the targeted fre-
quency peak is rolled off in a smooth curve — up to –24 dB per octave — en-
suring that the low end is always tight and out of the mud, while the frequen-
UAD Powered Plug-Ins Manual - 221 - Chapter 22: Little Labs VOG
cies above remain intact. The higher the amplitude of the peak resonance
frequency, the more you cut off the mud below, effectively performing two
functions at once. A dedicated “flat” button allows you to quickly audition
A/B comparisons.
Stereo Unlike the original hardware (which is monophonic), the plug-in enables ste-
Functionality reo use with one control set, providing perfectly matched stereo response.
When the plug-in is used in mono-in/stereo-out and stereo-in/stereo-out con-
figurations, the controls affect both the left and right signals.
Frequency This control adjusts the target frequency of the effect. Fre-
quencies above the current setting are boosted by the
amount set with the Amplitude control. Frequencies below
the current setting are attenuated by –24 dB per octave.
UAD Powered Plug-Ins Manual - 222 - Chapter 22: Little Labs VOG
Like the original hardware, increasing the Frequency value (rotating clock-
wise) actually lowers the target frequency (“increases the low end”). Changes
to this setting are heard only if Amplitude is set above zero.
Note: The control values for Frequency, which range from 0 – 10, are arbi-
trary and do not reflect a particular frequency value.
Center The two Center switches define the active center frequency
of the effect, which in turn determines the available fre-
quency range. The four available center frequencies, and
resulting frequency ranges, are shown in Table 19 below.
UAD Powered Plug-Ins Manual - 223 - Chapter 22: Little Labs VOG
The Little Labs VOG
hardware unit
UAD Powered Plug-Ins Manual - 224 - Chapter 22: Little Labs VOG
CHAPTER 23
Overview
Universal Audio’s UAD Powered Plug-In versions of the Manley Massive Pas-
sive EQs represent UA’s most ambitious and detailed EQ model to date. The
two-channel, four-band Manley Massive Passive tube EQ utilizes design
strengths from choice console, parametric, graphic, and Pultec EQs — deliv-
ering a fundamentally different sounding EQ that is beyond compare. The in-
credibly natural, organic results of the Manley design method — evidenced
on albums such as Wilco’s Yankee Hotel Foxtrot, Amon Tobin’s Foley Room
and Tori Amos’ A Piano: The Collection — demonstrate how the Massive Pas-
sive’s natural treatment of a signal lends itself to both radical tonal shaping as
well as delicate vocal shading or subtle mastering enhancement.
UAD Powered Plug-Ins Manual - 225 - Chapter 23: Manley Massive Passive EQ
Massive Passive Screenshots
Unusual EQ Conventions
The Massive Passive has design and operation characteristics that make it
unique in the EQ world. Some of these factors mean the “Massivo” may not
respond in a manner that you would expect from typical EQs. Keeping these
points in mind may help you obtain more satisfactory results. See “Notes from
Manley Laboratories” on page 235 for more tips.
Passive EQ No active components are used in the EQ circuits, just like revered vintage
EQs. This can make some adjustments respond in more subtle ways.
Parallel The EQ bands are routed in parallel instead of serially, so gain values for the
Topology bands don’t “add up” like most EQs. For example, if two bands in the same
channel are boosted 20 dB at 2.7kHz, you’ll get much less than 40 dB of
boost at 2.7kHz.
UAD Powered Plug-Ins Manual - 226 - Chapter 23: Manley Massive Passive EQ
Unique Shelves Most EQs offer a shelving mode for the edge bands only. Massive Passive of-
fers the shelving option on all bands for expanded sonic possibilities, such as
“staircase” EQ curves.
No negative One result of not using negative feedback loops in the design is that the gain
feedback loops control for a band cannot have a “bipolar” boost and cut control. Only band
gain is available; how that band gain is applied, either as a boost or as a cut,
is specified with a separate toggle switch.
Control Due in large part to the above points, the Massive Passive controls are much
Interaction more interactive with, and interdependent upon, each other. We encourage
experimentation with an open mind, without expectations of what a visual in-
terpretation of what control settings “should” do.
The Massive Passive Mastering has nearly the same features and control set
(plus all the musicality of) the standard version with a few tweaks that offer
more practical functionality for program material. The Mastering version fea-
tures include:
• Stepped channel gain, band gain, and bandwidth controls for repeatabil-
ity.
• Channel gain and band gain ranges are reduced for finer resolution.
• Low/high pass filter frequencies and slopes are optimized for mastering.
The Mastering Massive Passive is identified by the all-black “flat top” band
gain and bandwidth control knobs and the word “MASTERING” near the cen-
ter of the interface (Figure 70 on page 226).
UAD Powered Plug-Ins Manual - 227 - Chapter 23: Manley Massive Passive EQ
Standard vs. Mastering Versions
The layout and function of the Massive Passive controls are essentially identi-
cal for both the Standard and Mastering versions. The exact control differ-
ences between the controls are detailed in Table 20 below.
High Pass Filter Values (Hz) 22, 39, 68, 120, 220 12, 16, 23, 30, 39
Low Pass Filter Values (kHz) 6, 7.5, 9, 12, 18 15, 20, 27, 40, 52*
Important: See “Standard vs. Mastering Versions” on page 228” for the
exact differences between the Massive Passive parameters.
When Boost or Cut is selected, its label illuminates (green for Boost, red for
Cut). When the switch is in the OUT position, the band is disabled.
Note: When set to OUT, the other band controls have no effect.
UAD Powered Plug-Ins Manual - 228 - Chapter 23: Manley Massive Passive EQ
Shelf/Bell The Shelf/Bell toggle switch defines the shape of the filter band. A
unique aspect of this control is that unlike other EQs where only the
edge frequencies offer a shelving mode, with Massive Passive all
bands can be used in either mode for expanded sonic possibilities.
Note: The Bandwidth control (page 230) affects the slope of the band filters
in both Shelf and Bell modes.
Shelf
The two lowest (leftmost) bands can each be in Low Shelf mode; the two high-
est (rightmost) bands can each be in High Shelf mode. Shelf slopes generally
boost or cut towards the highs or lows (thus the high shelves and low shelves).
The two middle shelves are almost the same as the outer ones but just have
other (interleaved) frequency choices.
Bell
Bell curves focus their boost and cut at a given frequency (the “Frequency” on
page 232) and the further away the signal is from that frequency, the less
boost or cut is applied.
Band Gain This control determines the amount of EQ gain to be applied to the
band. The range is from zero gain (flat) at the fully counter-clock-
wise position, to the maximum value at the fully clockwise posi-
tion. Whether the gain is applied as a boost or cut is defined by
the Boost/Cut/Out switch (page 228).
The range for the standard version is continuously variable at up to ±20 dB;
the range for the Mastering version is up to ±11 dB in 16 steps (in both ver-
sions the maximum value depends on the Bandwidth control).
Important: When Gain for the band is set to zero, the other band controls
have no effect.
Unlike most EQs, this control is not flat at the center position with the gain cut
or boosted by moving the control to left or right of center. This design allows
the band gain to operate at twice the knob resolution as that of a “conven-
tional” dual-purposed control, as well as facilitating a quicker and more ac-
curate return to zero.
UAD Powered Plug-Ins Manual - 229 - Chapter 23: Manley Massive Passive EQ
Gain has a fair amount of interaction with the Bandwidth control. The maxi-
mum band gain is available in Shelf mode when Bandwidth is fully
counter-clockwise; less band gain is available in Shelf mode as the Band-
width is decreased (rotated clockwise). Conversely, the maximum gain is
available in Bell mode when Bandwidth is fully clockwise; in Bell mode less
band gain is available as Bandwidth is decreased (rotated counter-clock-
wise).
Due to the parallel EQ topology, the four band Gain controls also interact
with each other unlike typical EQs. For example, if two bands in the same
channel are boosted 20 dB at 2.7kHz, you’ll get much less than 40 dB of
boost at 2.7kHz. This also implies that if you first boost one band, that the
next three will not seem to do anything if they are at similar frequencies and
bandwidths.
Bandwidth Bandwidth adjusts the slope or “Q” of the band filter in both
Bell and Shelf modes. Bandwidth does not have a lot of range
and it also affects the maximum boost and cut (like a Pultec).
Bell Mode
Shelf Mode
UAD Powered Plug-Ins Manual - 230 - Chapter 23: Manley Massive Passive EQ
As Bandwidth is increased in Shelf mode, a bell curve begins to be intro-
duced in the opposite direction (i.e., overshoot). For example, if the Shelf is
boosted, a dip is created at higher Bandwidth values. At maximum Band-
width, this overshoot curve is pronounced. The effect of the Bandwidth control
in Shelf mode is shown in Figure 72 below.
UAD Powered Plug-Ins Manual - 231 - Chapter 23: Manley Massive Passive EQ
Frequency This control defines the center frequency (Bell mode) or edge
frequency (Shelf mode) for the band. Each band provides a
wide range of specially tuned overlapping and interleaving
frequency choices. The available frequencies for each band
are listed in Table 21 below.
Available
Frequencies Table 21. Available band frequencies (standard and mastering)
Massive Passive Band Selectable Frequencies (Hz)
Low 22, 33, 47, 68, 100, 150, 220, 330, 470, 680, 1K
Low Mid 82, 120, 180, 270, 390, 560, 820, 1.2K, 1.8K, 2.7K, 3.0K
High Mid 220, 330, 470, 680, 1K, 1.5K, 2.2K, 3.3K, 4.7K, 6.8K, 10K
High 560, 820, 1.2K, 1.8K, 2.7K, 3.9K, 5.6K, 8.2K, 12K, 16K, 27K
Channel Controls
The controls for the two identical channels (left and right) are
detailed below. Because both UAD Massive Passive plug-ins
operate the same way (and the controls for each channel are
identical), the control descriptions for each channel are only
detailed once.
EQ In The EQ In pushbutton switch enables the channel. When the button illu-
minates in a brighter blue, the channel is active and the other channel
controls will affect the signal. When this control is disabled, all the de-
sirable low-level system filtering and coloration is retained in the channel, just
like the original hardware.
Channel Gain This knob sets the overall gain for the channel. The range for the
standard version is continuously variable from –6 dB to +4 dB. The
range for the Mastering version is ±2.5 dB, in 0.5 dB steps.
UAD Powered Plug-Ins Manual - 232 - Chapter 23: Manley Massive Passive EQ
The Channel Gain controls are intended to help match levels between “By-
pass” and “EQ enabled” modes so that the EQ effect can be more accurately
judged. With drastic EQ there may not be enough range to match levels, but
with drastic EQ this kind of comparison is of little use. The range is small to al-
low easier and finer adjustments.
Filters Low Pass and High Pass filters are available for both channels. The response
curves of the filters are shown in Figure 73 below. The available Filter values
differ between the standard and mastering versions; see Table 20 on
page 228 for the available values for each version.
Low Pass The Low Pass filter allows the channel’s lower frequencies to
pass while attenuating higher frequencies. The slope of the
Low Pass filter depends on the value set for the filter. At 6K,
7K5, and 9K values, the filter slope is 18 dB/octave. At these
values, a small (1.5 to 2 dB) bump occurs in the response before the curve
drops off. At 12K, the slope is 30 dB/octave. At 18K, a modified elliptical fil-
ter is used.
In the mastering version, when Low Pass is set to 27kHz the frequency re-
sponse is down by about 0.6 dB at 20kHz. When the control is set to 52kHz,
there is actually a boost of about 0.4 dB at 20kHz; the filter is slightly reso-
nant at this setting so there is a slight boost before the filter starts rolling off.
High Pass The High Pass filter allows the channel’s higher frequencies to
pass while attenuating lower frequencies. The slope of the
High Pass filter is 18 dB/octave.
UAD Powered Plug-Ins Manual - 233 - Chapter 23: Manley Massive Passive EQ
Figure 73. High Pass and Low Pass filter response curves (standard version)
Mastering The Low Pass/High Pass filter frequencies in the mastering version are tuned
Filters specifically for mastering, and the slopes are flatter until the knee. The slopes
are 18 dB per octave on the mastering filters except for the highest value
(52K) which is 30 dB/octave.
Other Controls
The Power and Link controls are global to both channels.
Power Power is a two-state knob that determines whether the plug-in is ac-
tive. When the knob is in the Off (counter-clockwise) position, all LED
elements are unlit, plug-in processing is disabled, and UAD DSP us-
age is reduced (unless UAD-2 DSP LoadLock is enabled).
Link The Link switch is a software-only addition that allows the two sets of controls
for each channel to be linked for ease of operation when both channels re-
quire the same values, or unlinked when dual-mono operation is desired. The
Link parameter is stored within presets and can be accessed via automation.
UAD Powered Plug-Ins Manual - 234 - Chapter 23: Manley Massive Passive EQ
When set to Link (up position), modifying any channel one or channel two
control causes its adjacent stereo counterpart control to snap to the same po-
sition (channel 1 & 2 controls are ganged together in Link mode).
When Link is active, automation data is written and read for channel one
only. In this case, the automation data for channel one will control both chan-
nels.
Note: When Link is active, changing channel two parameters from a control
surface or when in “controls only” (non-GUI) mode will have no effect.
When set to unlink (down position), the controls for channels one and two are
completely independent. Unlink is generally used in mono mode. When un-
linked, automation data is written and read by each channel separately.
Note: If disparate values are set under the unlinked state, the left channel will
override the right channel when Link is activated.
Note: Compensating for Massive Passive is not required if the host applica-
tion supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs.
UAD Powered Plug-Ins Manual - 235 - Chapter 23: Manley Massive Passive EQ
20 dB at the narrowest bandwidth. On the other hand, because of how
transparent this EQ is, you might actually be EQing more than you could
with a different unit. Taste rules, test benches don't make hit records, believe
your ears.
• Sometimes the shelves will sound pretty weird, especially (only) at the nar-
row bandwidth settings. They might seem to be having a complex effect and
not only at the “dialed in” frequency. This is certainly possible. Try wider
bandwidths at first.
• If you seem to be boosting all 4 bands at widely separated frequencies and
not hearing much “EQ” as you might expect (except for level) this is a
side-effect of a passive EQ and probably a good thing. To get drastic sound-
ing EQ you should try boosting a few bands and cutting a few bands. In
fact, it is usually best to start with cutting rather than boosting.
• A reasonable starting point for the Bandwidth for shelves is straight up or
between 11:00 and 1:00. It was designed this way and is roughly where
the maximum flatness around the “knee” is, combined with a well defined
steep slope.
• The Massive Passive may sound remarkably different from other high end
EQs and completely different from the console EQs. Yes, this is quite delib-
erate. Hopefully it sounds better, sweeter, more musical and it complements
your console EQs. We saw little need for yet another variation of the stan-
dard parametric with only subtle sonic differences. We suggest using the
Massive Passive before tape, for the bulk of the EQ tasks and then using the
console EQs for some fine tweaking and where narrow Q touch-ups like
notches are needed. The Massive Passive is equally at home doing big,
powerful EQ tasks such as is sometimes required for tracking drums, bass
and guitars, or for doing those demanding jobs where subtlety is required
like vocals and mastering.
Additional Information
The original (and rather lengthy) user manual written by Manley Labs for the
hardware unit contains a wealth of great information about the philosophy,
design decisions, and use of the Massive Passive EQ. It is highly recom-
mended reading for those interested in technical details. The manual can be
found on their website, along with info about their other great products:
• http://www.manley.com/manuals.php
UAD Powered Plug-Ins Manual - 236 - Chapter 23: Manley Massive Passive EQ
The Massive Passive EQ hardware interior
All visual and aural references to the Massive Passive EQ and all use of MANLEY’s trademarks
are being made with written permission from MANLEY LABORATORIES INCORPORATED.
Special thanks to EveAnna Manley.
UAD Powered Plug-Ins Manual - 237 - Chapter 23: Manley Massive Passive EQ
CHAPTER 24
Introduction
The Manley Stereo Variable Mu Limiter Compressor has been Manley Lab's
flagship compressor since 1994. The Variable Mu's Class-A, tube and custom
transformer-driven design epitomizes hand-made boutique craftsmanship.
The Variable Mu is considered the gold standard among mix engineers
thanks to its smooth, transparent dynamics control, and ability to add clarity
and cohesion to stereo buses or an entire mix.
UAD Powered Plug-Ins Manual 238 Manley Stereo Variable Mu Limiter Compressor
Variable Mu Screenshot
Variable Mu Overview
The Manley Stereo Variable Mu Limiter Compressor is a highly flexible
two-channel processor for adding transparent dynamics control and tube
warmth to mix and master buses or individual tracks.
While the Manley Variable Mu uses the remote cut-off style gain reduction
found in the Fairchild and other classic limiters, it has a sound and character
all its own. Incorporating a traditional dual-triode gain reduction design
which is constantly re-biased by the sidechain control voltages, the Variable
Mu combines Manley’s hand-selected tubes and in-house transformer manu-
facturing to create a unique variable gain compressor design with stunning
transparency. This lets you treat source material with velvety-smooth gain re-
duction, while infusing warm harmonic content, free of audible compression
artifacts.
When set to Left-Right (versus Mid-Side) and the sidechain is unlinked, the pro-
cessor operates as a dual mono device. Except for the ganged Dual Input con-
trol, the left and right channels are completely independent, and each chan-
nel can have unique settings.
UAD Powered Plug-Ins Manual 239 Manley Stereo Variable Mu Limiter Compressor
Stereo
When set to Left-Right and the sidechain is linked, the plug-in is operating as
a stereo device. The left signal is fed to the left channel compressor, and the
right signal is fed to the right channel compressor. The two compressors are
constrained so that they both compress the same amount at any instant, pre-
venting transients that appear only on one channel from shifting the stereo im-
age of the output (any big transient on either channel will cause both channels
to compress). The amount of compression will be similar to the amount of com-
pression for a transient which appears on both channels at the same time.
In stereo operation, the controls for the left and right channels can be unlinked
so they are independent and can be adjusted separately. Threshold, attack,
and recovery can be set independently to cause the compressor to be more
sensitive to instruments which are panned to one side or the other. Output con-
trols can be set separately in order to correct an overall image shift at the out-
put.
Mid-Side The Manley Variable Mu can perform dynamics processing on the middle
Processing and side components of stereo signals independently. In other words, the
monophonic (middle, or sum) and/or stereo (side, or difference) components
of a stereo source signal can be processed separately from the other compo-
nent.
In the Variable Mu, the left+right (sum) middle signals are routed to the left
channel, and the left-right (difference) side signals are routed to the right chan-
nel. The two channels can work independently of each other, or the dynamics
sidechain control signal can be optionally linked for creative uses.
The Variable Mu has separate Mid-Side switches for input and output. The
M-S IN switch activates the sum/difference matrix on input (encode) and the
M-S OUT switch activates the sum/difference matrix on output (decode). The
separate matrices allow for using only “half” of a full encode/decode circuit
UAD Powered Plug-Ins Manual 240 Manley Stereo Variable Mu Limiter Compressor
on input or output (but not both) when a full encode/decode process is not de-
sired. For example, this feature can be used to decode stereo tracks recorded
with the mid-side microphone technique back into a standard left/right stereo
signal.
Note: Each sum/difference matrix simply inverts the stereo signal type from
left-right to mid-side, or from mid-side to left-right. They don’t distinguish be-
tween the original signal type, so they can be used to convert either type to
the other type.
Variable Mu There are two independent processors within the Variable Mu. Depending on
Modes the state of the two Left-Right/Mid-Side switches (one for input and one for out-
put) and the Sidechain Link switch, numerous operating modes are possible.
Modes Table The switch positions required for various operating modes are shown in the
table below, followed by descriptions of the modes.
UAD Powered Plug-Ins Manual 241 Manley Stereo Variable Mu Limiter Compressor
Stereo Left/Right
In this mode the Variable Mu operates as two monophonic processors with in-
dependent control of the middle and side components of the two input sig-
nals. The input signals are encoded by the mid/side (sum/difference) matrix
before processing and there is no interaction between the two processors. The
left channel processes the mid component, the right channel processes the
side component, and the mid/side components are decoded back into a nor-
mal stereo signal at the outputs.
This mode is the same as Dual Mid/Side, except the signal components are
not routed through the output matrix.
This mode is the same as Dual Mid/Side, except the signal components are
not routed through the input matrix.
Operating The Headroom control, which is a UAD-only feature not found in the original
Headroom hardware, enables adjustment of the internal operating reference level for the
Manley Variable Mu. Headroom enables best practice operating level match-
ing, or it can be used creatively to expand the sonic range of the processor.
By fine-tuning Headroom, the non-linear I/O distortion and compression re-
sponse characteristics can be tailored independently of signal input levels.
Unmarked Some continuous controls (Dual Input, Threshold, Attack, Output) have a
Controls range of zero to ten when viewed in controls mode (if supported by the
DAW). As with the original hardware, these controls are not marked with
absolute values and are designed to be set “by ear” instead of by selecting
pre-defined values.
UAD Powered Plug-Ins Manual 242 Manley Stereo Variable Mu Limiter Compressor
Artist Presets The Manley Variable Mu includes artist presets from prominent Variable Mu
users. The artist presets are in the internal factory bank and are accessed via
the DAW application’s preset menu. The artist presets are also copied to disk
by the UAD installer so they can be used within Apollo’s Console application.
The presets can be loaded using the Settings menu in the UAD Toolbar (see
“Using UAD Powered Plug-Ins” in Chapter 7 of the UAD System Manual).
Manley Variable The Manley Variable Mu plug-in uses an internal upsampling technique to
Mu Latency achieve sonic design goals. The upsampling results in a slightly larger latency
than most other UAD plug-ins (between 55 and 88 samples, depending on
the sample rate).
Dual Input This continuously variable control determines the signal input
level (gain) for both channels of the processor. Higher levels re-
sult in a more colored signal. Lower levels result in a more trans-
parent or natural sound.
The amount of signal compression is determined by both the Dual Input and
Threshold controls. If one is increased and the other decreased, the compres-
sion characteristics won’t change much, but the color characteristics will.
Tip: For less color with the same amount of compression, lower the input gain
and lower the threshold control.
UAD Powered Plug-Ins Manual 243 Manley Stereo Variable Mu Limiter Compressor
Attack Attack sets the amount of time that must elapse once the input sig-
nal reaches the Threshold level before compression is applied.
The faster the Attack, the more rapidly compression is applied to
signals above the threshold.
Recovery The Recovery (release) knob sets the time it takes for process-
ing to cease once the input signal drops below the threshold
level. The available values are shown in the table below.
The default setting is Medium Fast.
Slow 8
Medium Slow 4
Medium 0.6
Fast 0.2
Limit
When set to Limit, the ratio starts at 4:1 and moves up to 20:1 when limiting
exceeds 12 dB. The limiter provides a sharper knee to catch peaks, but actu-
ally softens as more limiting is used.
UAD Powered Plug-Ins Manual 244 Manley Stereo Variable Mu Limiter Compressor
Compress
When set to Compress, the ratio is set to 1.5:1 with a soft-knee characteristic.
Soft-knee provides a more subtle compression resulting in a natural, less com-
pressed sound.
Note: As with the original hardware, the Variable Mu plug-in can never
achieve greater than –10 dB of gain reduction.
Sidechain Filter When set to HP SC, this switch rolls off low frequencies in the dynam-
ics control sidechain. The signal is attenuated by –3 dB at 100 Hz
with a slope of 6 dB per octave. When set to FLAT, the sidechain is un-
filtered. The default setting is FLAT.
Removing low-frequency content from the sidechain by engaging the filter can
reduce excessive gain reduction and/or “pumping” on bass-heavy audio sig-
nals without reducing bass content of the audio signal itself.
Bypass The Bypass switch determines whether or not the incoming signal is
processed by the plug-in. When set to Bypass, the source signal is un-
affected.
These two switches enable the sum/difference matrix for the input and/or the
output. The switch on the left (labeled IN) enables the processor input matrix,
and the switch on the right (labeled OUT) enables the processor output matrix.
• For mid/side compression on a standard stereo left-right signal, set both IN
and OUT switches to M-S.
• For single-ended processing (for example, to process a stereo track re-
corded with a mid/side microphone technique), set only one switch to M-S.
• Sidechain Link should generally be disabled for traditional mid-side pro-
cessing. Of course, the sidechains can be linked for creative purposes.
IN
When the M-S switch labeled IN is set to L-R, incoming stereo signals
are passed directly into the compressor inputs, bypassing the input
sum/difference matrix.
UAD Powered Plug-Ins Manual 245 Manley Stereo Variable Mu Limiter Compressor
When set to M-S, incoming stereo signals are passed through the sum/differ-
ence matrix, converting one signal type (left/right or mid/side) to the other
type before compression.
OUT
When the M-S switch labeled OUT is set to L-R, outgoing (post-compres-
sion) stereo signals are passed directly to the outputs, bypassing the out-
put sum/difference matrix.
When set to M-S, outgoing stereo signals are passed through the
sum/difference matrix after compression, converting one signal type
(left/right or mid/side) to the other type before being output.
Sidechain Link When this control is set to Link, it causes the two channels of the com-
pressor to compress in equal amounts. This does not mean that the
compressor will be equally sensitive to either channel however; that
depends on the settings of the other controls.
When Sidechain is set to LINK but Controls Link is off, the Threshold controls
can be set independently to cause the compressor to be more sensitive to in-
struments which are panned to one side or the other. Output controls can be
set separately in order to correct an overall image shift at the output.
Controls Link This switch links the controls for the left and right channels of the pro-
cessor. When set to LINK, adjusting the left channel controls will
force the equivalent right channel controls to move to the same posi-
tion.
To read and write automation data for both channels independently when in
dual-mono mode, Controls Link must be disabled.
Important: When unlink is switched to link, the left channel values are cop-
ied to the right channel, and any control offsets between channels are lost.
Mix The output balance between the signal processed by the plug-in
and the original dry source signal can be adjusted with the Mix
control. Mix facilitates parallel compression techniques without
having to create additional routings in the DAW.
UAD Powered Plug-Ins Manual 246 Manley Stereo Variable Mu Limiter Compressor
When set to DRY, only the unprocessed source signal is output. When set to
WET (the default value), only the processed signal is output. When set to the
center position (50%), an equal blend of both the dry and wet signals is out-
put. The balance is continuously variable throughout the control range.
Note that the dry signal is unaffected by the Variable Mu’s Output control.
Tip: Click the “MIX” text label to set the control to the 50% position. Click the
“DRY” text label to set the control to the minimum position. Click the “WET”
text label to set the control to the maximum position.
Note: There is only one headroom parameter. Although the Headroom con-
trol appears twice in the Variable Mu window, they are permanently linked.
Headroom can be set (in dB) to 4, 8, 12, 14, 16, 18, 20, 24, or 28. The de-
fault value is 16 dB (when the set screw “dot” is in the straight up 12 o’clock
position). Note that Headroom is increased as the dB value decreases.
Tip: Click the “HEADROOM” text label to return the control to the default
value.
At higher dB values (clockwise rotation), signals will push the plug-in into gain
reduction (and more non-linearity and “good” harmonic distortion color)
more easily. Set the control to a lower value (counter-clockwise rotation) when
less gain reduction and less color is desired.
Note: To avoid the temporary gain increases that can result when adjusting
Headroom, automating this control is not recommended.
Keep in mind there are no hard and fast headroom rules. Feel free to exper-
iment with the various positions of the Headroom control regardless of the au-
dio source. If it sounds good, use it!
On/Off This switch determines whether the plug-in is active. When set to
the Off position, the VU meters go dark to indicate signal process-
ing has ceased. In this state, plug-in processing is disabled and UAD DSP us-
age is reduced (unless UAD-2 DSP LoadLock is enabled)
UAD Powered Plug-Ins Manual 247 Manley Stereo Variable Mu Limiter Compressor
Gain Reduction Dual VU meters display the amount of gain
Meters reduction in decibels. In typical use, adjust-
ing Threshold towards MIN (counter-clock-
wise) results in the VU meters displaying
higher amounts of reduction.
Additional Information
The original user manual written by Manley Labs for the hardware unit con-
tains a wealth of great information about the philosophy, design decisions,
and use of the Massive Variable Mu. It is highly recommended reading for
those interested in technical details. The manual can be found on their web-
site, along with info about their other great products:
• http://www.manley.com/manuals.php
All visual and aural references to the Variable Mu and all use of MANLEY’s trademarks are being
made with written permission from MANLEY LABORATORIES INCORPORATED.
Special thanks to EveAnna Manley and Dave Collins.
UAD Powered Plug-Ins Manual 248 Manley Stereo Variable Mu Limiter Compressor
CHAPTER 25
Overview
If UA were able to conceive a product with Moog, what would it be? The
answer is revealed in the new UAD Moog Multimode Filter, which delivers the
first truly analog-sounding VCF (voltage controlled filter) emulation made for
mixing, performing, creating, or destroying. The Moog Multimode Filter is a
‘digital-only’ tabletop filter set that combines the best of Bob Moog’s classic
designs with select features from his final Voyager instrument. UA modeled
the analog behavior of the historical 4-pole ladder filter conceived by the
world’s most recognizable electronic instrument maker right down to the
self-oscillation, saturation and non-linearities of its analog counterpart. As the
name suggests, the heart of the Moog Multimode Filter is the switchable Low-
pass, Highpass and Bandpass filter that allows Moog’s signature self-oscilla-
tion and extreme resonance in any of the three modes, bringing a new level
of sophistication to Moog filter designs of the past.
The UAD Moog Filter algorithm uses a special filter structure that was created
especially to eliminate “digital” artifacts for time-varying filters. An expensive
DSP technique was used to calculate the response of the nonlinear feedback
loop surrounding the saturation and filter elements.
Warning: Like most resonant filters, UAD Moog Filter has the potential to
create unpredictable sonic results that can result in unexpected jumps in out-
put amplitude. Depending on the source material, input levels, and parameter
values, the filter output can suddenly get extremely loud, with the potential to
damage speakers and/or hearing. This condition is particularly susceptible
when the simultaneous conditions of high gain, low filter cutoff, and high res-
onance values are applied, and/or when the LFO sweeps into these condi-
tions. Use caution and/or low monitoring levels when dialing in extreme
parameter values to avoid speaker and/or hearing damage!
UAD Powered Plug-Ins Manual - 249 - Chapter 25: Moog Multimode Filter
Moog Filter Screenshot
Drive Drive controls the amount of saturation gain before the filter.
Drive is where much of the sonic “juice” in the UAD Moog Fil-
ter originates. Drive can change the signal from clean to
slightly overdriven to extremely distorted, particularly when
used in conjunction with the Boost switch (see “Boost” on
page 255).
UAD Powered Plug-Ins Manual - 250 - Chapter 25: Moog Multimode Filter
Warning: Due to these differences in input structure, cut and pasting of
full-to-SE and SE-to-full presets may cause noticeable differences in gain. Keep
hold of the master fader!
Drive/Gain LED The Drive/Gain multicolor LED indicates the plug-in signal level
just after the Drive/Gain control. The Drive/Gain LED operates
when the plug-in is in Bypass mode, but not when Power is off.
Envelope The Envelope controls (Envelope knob, Smooth/Fast switch) closely mimic the
controls of the MF-101 Moogerfooger. However, UA has broadened the
sonic palette with a negative range allowing unique negative envelope
effects.
The cutoff frequency of UAD Moog Filter can be modulated by the amplitude
of the signal coming into the plug-in. This function is typically called an “en-
velope follower” or “auto wah” because the cutoff frequency “follows” the
signal input level. The amount and speed of the envelope response can be ad-
justed.
The envelope knob determines how much the filter cutoff frequency is affected
by the signal input level. Positive and negative values are possible. Positive
values increase the filter cutoff as the input amplitude increases (the filter
opens as the signal gets louder). Negative values decrease the filter cutoff as
input amplitude increases (the filter closes as the signal gets louder).
The greater the value (either positive or negative), the greater the amount of
filter modulation (the cutoff frequency range is increased with greater values).
Tip: Click the knob label (“ENVELOPE”) to return the value to zero.
Envelope LED This LED indicates the relative peaks of the control envelope. The
envelope LED does not illuminate when the plug-in is in Bypass mode
or when Power is off.
Smooth/Fast This toggle switch determines the release time of the control envelope. In
Smooth mode, the release time is 200 milliseconds. In Fast mode, the release
time is 40 milliseconds. In both modes, the attack time is 25 milliseconds.
UAD Powered Plug-Ins Manual - 251 - Chapter 25: Moog Multimode Filter
Cutoff This parameter defines the cutoff frequency of both filter channels in all modes
(lowpass, bandpass, highpass). UA has expanded the available frequency
range of 20 Hz to 12 kHz on the MF-101 Moogerfooger to the broader avail-
able range of 12 Hz to 12 kHz on the Moog Mulitmode Filter.
Tip: The cutoff value can be adjusted in musical semitone (1/2 step) incre-
ments/decrements using coarse control shortcuts, and 1/4 semitone incre-
ment/decrement using fine control shortcuts. See “Shortcuts” in Chapter 7 of
the UAD System Manual for details.
Resonance Resonance determines the amount of filter feedback, which accentuates the
harmonic content at the cutoff frequency. Higher values can produce a “whis-
tling” quality to the filter, and at very high values the filter may self-oscillate.
Pole (Slope) The filter slope is determined by this switch. The slope defines how “steep” the
frequencies above the cutoff in lowpass mode (or below the cutoff in highpass
mode) are rolled off.
2-Pole
In 2-pole mode, the filter has a slope of 12 dB per octave. For example, in
lowpass mode frequencies that are double the cutoff frequency (an octave)
are attenuated by 12 dB. 2-pole filtering is less aggressive than 4-pole mode,
but has its own unique sound that you may find is better suited for certain
types of signals.
4-Pole
4-Pole mode has a steeper slope (24 dB per octave), so the filtering is more
obvious. This is the “classic” (and luscious) Moog filter, in all its glory, that has
been employed on just about every Moog product, from the Modular to the
Minimoog to the Voyager.
UAD Powered Plug-Ins Manual - 252 - Chapter 25: Moog Multimode Filter
Step/Track This switch is a smoothing control for the filter cutoff frequency parameter.
Smoothing is most obvious on continuous filter sweeps when varying the cut-
off rapidly with the knob or automation. Step mode can be desirable when
sudden cutoff changes are automated and other creative purposes.
Note: When set to Track, the plug-in does not “track” the input signal fre-
quency like a synthesizer filter.
Mode This control is the heart of the Moog Multimode filter, combining Moog’s clas-
sic lowpass filter with highpass and bandpass in one control. Unlike Moog
highpass and bandpass filters of the past, UA's design presents Moog's sig-
nature self-oscillation in all three modes, bringing a new level of sophistica-
tion to Moog filter designs of the past. The knob switches between the avail-
able filter types.
Lowpass
Bandpass
Highpass
Spacing Spacing inversely offsets the filter cutoff values for the left and right channels.
In other words, positive Spacing values increase the right channel cutoff while
lowering the left channel cutoff, and vice versa.
Spacing can create great stereo spacial effects. When the filter is in Mono
mode, both filters are still heard.
Tip: Click the knob label (“SPACING”) to return the value to zero.
UAD Powered Plug-Ins Manual - 253 - Chapter 25: Moog Multimode Filter
LFO The LFO (low frequency oscillator) modulates the filter cutoff frequency. Sev-
eral waveform shapes are available. The LFO can be synchronized to the
tempo of the host (see Free/Sync below).
Amount Amount controls the depth of the LFO filter cutoff modulation. A higher value
will have a broader filter sweep.
Rate Rate controls the speed of the LFO. The available range is from 0.03 Hz to 25
Hz in Free mode, or 16/1 to 1/64 to in Sync mode.
Rate LED The LFO Rate LED illuminates in conjunction with the LFO rate, once per
LFO cycle. Clicking this LED resets the LFO cycle (see “LFO Reset”
below).
LFO Reset The LFO is reset to its zero crossing by clicking the LFO Rate LED. This param-
eter can be automated for mixing or bouncing.
Normally the LFO is “free running” but this behavior is not always desirable.
For example, if you are using LFO filter modulation, you may want playback
to always sound exactly the same when bouncing or mixing. To accomplish
this, the LFO must be started at the same place (zero crossing) of the LFO
waveform. Reset enables this sonic consistency when using the LFO.
Free/Sync This switch defines whether the LFO is synchronized to the tempo of the host
application (if this feature is supported by the host). See Chapter 8 “Tempo
Sync” in the UAD System Manual for more information.
To ensure the LFO phase is consistent when in Sync mode, automate the Reset
parameter (see “LFO Reset” on page 254).
Wave This control determines the waveform shape used by the LFO. Six waveshapes
are available: Sine, Triangle, Sawtooth-Up, Sawtooth-Down, Square, and
Random.
UAD Powered Plug-Ins Manual - 254 - Chapter 25: Moog Multimode Filter
Offset Offset adjusts the polarity between LFO signals for the left and right channels.
The available range is ±180 degrees.
Offset can create great stereo spacial effects. When the filter is in Mono
mode, both filters are still heard.
Tip: Click the knob label (“OFFSET”) to return the value to zero.
Mix Mix varies the amount of filtering that is occurring. It is not a true dry/wet con-
trol; it mimics the mix function on the MF-101 Moogerfooger. When Mix is at
zero, the Drive/Gain control (and Boost on non-SE version) are still active and
audible.
Setting Mix at zero is the same as setting the Effect/Bypass switch to Bypass.
Stereo/Mono The left and right channel filters are always independent in the UAD Moog Fil-
ter. However, when this switch is set to Mono, the left and right output chan-
nels are summed. In Stereo mode, the left/right separation is retained.
Output The Output control changes the gain at the output of the plug-in. The available
range is ±20 dB.
Output LED This LED gives a visual indication of the plug-in output level. The Out-
put LED is active when Bypass is enabled, but not when Power is off.
When the LED is red, the output is 0 dBfs.
Effect/Bypass When Bypass is enabled, filter processing is inactive. Drive/Gain and Output
still operate in Bypass mode. Enabling Bypass has the same effect as setting
Mix to zero.
If the Free/Sync switch is set to Free, the LFO phase is reset to zero when
Bypass is switched to Effect.
Boost Boost shifts the “Drive” gain range up a full 20 dB, while simultaneously shift-
ing the Output range down –20 dB. This mimics the behavior of the external
input on the Minimoog.
Power Power disables the plug-in altogether and disables DSP processing. When
off, the background will “dim” much in the same way the Voyager's panel
does when powered off.
UAD Powered Plug-Ins Manual - 255 - Chapter 25: Moog Multimode Filter
Moog Filter SE
Overview The UAD Moog Filter SE is derived from the UAD Moog Filter. Its algorithm
has been revised (primarily the elimination of the Drive circuit) in order to pro-
vide sonic characteristics very similar to the Moog Filter but with significantly
less DSP usage. It is provided to allow Moog Filter benefits when DSP
resources are limited. The UAD Moog Filter SE sounds great even without
Drive, and is very usable in many situations.
The Moog Filter SE interface can be differentiated from the full Moog Filter by
color and the module name. The Moog Filter SE is uses the “Luna” back-
ground and maple sides borrowed from the Voyager “Select Series.” The full
version uses the Voyager's “electric blue” backlighting and mahogany sides.”
Moog Filter SE The Moog Filter SE controls are nearly the same as the Moog Filter. The
Controls exceptions are the Drive related controls (“Drive” and “Boost”) are unavail-
able on the SE model, and the “Drive” control is replaced with a straight
(non-modeled) “Gain” control.
Please refer to the Moog Filter section for Moog Filter SE control descriptions
(see “Moog Filter Controls” on page 250).
Note: When preset settings are copied from the full Moog Filter version to
the SE version, the Boost (+20) switch value is retained, even though the
parameter is not available for SE. If you subsequently copy from SE back to
the full version, the original Boost value is pasted.
UAD Powered Plug-Ins Manual - 256 - Chapter 25: Moog Multimode Filter
Moog Filter Latency
The Moog Filter (but not the Moog Filter SE) uses an internal upsampling tech-
nique to facilitate its amazing sonic quality. This upsampling results in a
slightly larger latency than other UAD plug-ins. See “Upsampled Plug-Ins” on
page 550 for more information.
Note: Compensating for Moog Filter is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
Moog® is a registered trademark of Moog Music, and is used under license with kind permission.
UAD Powered Plug-Ins Manual - 257 - Chapter 25: Moog Multimode Filter
CHAPTER 26
MXR Flanger/Doubler
The MXR Flanger/Doubler plug-in for UAD-2 is perfect for adding that “spe-
cial something” to your tracks, and getting the creative juices and sound-shap-
ing possibilities flowing. This plug-in models the original hardware unit in me-
ticulous detail, and makes all its chewy analog goodness available for the first
time in plug-in form. From guitars and basses to drum breaks, the MXR
Flanger/Doubler plug-in will get your tracks moving.
History Flanging originated as a tape effect where two tape machines are playing
two identical and synchronized signals, and one is gradually delayed to cre-
ate unique comb filtering effects. In the late 70’s, MXR introduced the famed
Flanger/Doubler unit which, unlike tape flanging, recreated this effect elec-
tronically via “bucket brigade” design.
The name is derived from human bucket brigades, whereby a line of many
people remain stationary while passing many buckets from one person to the
next. Bucket brigades were commonly used by firefighters to deliver water to
a fire more efficiently than would be possible if each person were to carry a
single bucket from the water source to the destination.
Operational Overview
Model 126 The MXR “Model 126” Flanger/Doubler is an analog delay processor that
uses “bucket-brigade” technology to create short signal delays. The delay
time can be modulated manually, or automatically with a low frequency os-
cillator (LFO). The delayed signal can be mixed with itself in a feedback loop
(“regenerated”), and its polarity can be inverted. The amount of processed
signal relative to the original signal is adjustable.
All sonics and control behaviors are authentically modeled, including the in-
herent aliasing characteristics and dry signal path coloration.
Modes Flanger
Doubler
When in Doubler mode, all controls have the exact same functionality as
Flanger mode; the only difference is that the available delay times are longer
in this mode. The delayed signal produces a very short echo, hence a “dou-
ble” of the original signal is heard.
In Use The MXR Flanger/Doubler is well suited for sound-shaping, recording, and
mixing, and even for adding some post-production flavor. Flanging is partic-
ularly popular as an individual effect on a wide range of musical sources —
including guitar, bass, drums, keyboards, full source material, and more. An-
other common use for the MXR Flanger/Doubler is as a group effect, where
effecting more than one signal is desired. Try applying the MXR Flanger/Dou-
bler to drum busses or even the entire mix, most often for a brief period in the
song, such as a break or bridge. In addition to Flanging, the Flanger/Doubler
excels as a short-range delay/doubler.
Power Power is the plug-in bypass control. Power is ON when the LED is
red. When set to OFF, emulation processing is disabled, the LEDs
are dimmed, and DSP usage is reduced (if DSP LoadLock is inac-
tive).
Power is useful for comparing the processed settings to the original signal.
Effect This button switches between Flanger and Doubler modes. It de-
fines the range of signal delay available for the mode. The func-
tion of all the other controls is the same in both modes.
See “Modes” on page 259 for additional details about the two effects.
When in the “down” (gray) position, Flanger mode is active. This is the de-
fault setting.
Doubler
Doubler mode is active when the button is in the “up” (white) position.
Stereo Mode This software-only switch modifies the processed signals at the out-
puts when used in a stereo-output configuration.
The control does not switch the processor between mono and ste-
reo modes; both modes are true stereo (when configured for stereo output).
In both stereo modes (Single and Dual), stereo separation of the dry signals
is maintained, and the stereo signal is not mixed to mono before processing
is applied.
Single
When in the “up” (white) position, Single mode is active. This is the default
setting.
In Single mode, the left and right signals are processed identically and the
Sweep LFO for both channels are in phase.
Dual
Width
At 0%, no modulation occurs and delay time is determined by the Manual set-
ting. As Width is increased, the amount of modulation becomes “wider” (a
broader sweep). At 100%, the delay time sweeps throughout its entire range,
automatically creating the same sound as moving the Manual control repeat-
edly back and forth from minimum to maximum.
Speed
Sweep Speed controls the rate of modulation applied to the delay time LFO.
The available range is 0.02 Hz to 15.96 Hz (this is the actual range of the
original hardware; the knob text on the hardware panel doesn’t match ex-
actly). The current speed is indicated by the Sweep LEDs and also shown in
the Rate Display.
The Sweep Speed can be synchronized to the tempo of the host application
by engaging the Sync function.
When Mix is set to the minimum/dry position, the input signal is colored by
the electronics of the unit (like the original hardware).
When set above its minimum value, the output of the effect
is routed back to its input. As the value increases, a more
resonant signal is produced. Regeneration has a governor
that prevents feedback “runaway” (overload) even when
set to the maximum value of 100%.
Mono This switch sums the stereo output of the dry and wet signals to mono
when the plug-in used in a stereo-output configuration. This function
is useful for creative purposes or checking phase relationships. The
output is stereo when the switch is in the “up” (white) position, and mono
when the switch in the “down” (gray) position.
Note: See “Stereo Mode” on page 261 for additional details about stereo
output.
Invert This switch inverts the polarity (“phase”) of the processed signal.
The wet signal polarity is normal when in the “up” (white) position,
and inverted when in the “down” (gray) position.
When the processed signal is inverted and combined with the dry signal, the
resultant comb filtering has a different timbre than when polarity is normal.
This is particularly evident in Flanger mode, which often sounds more “hol-
low” when polarity is inverted.
See Chapter 8 “Tempo Sync” in the UAD System Manual for complete details
about this feature.
Rate Display The rate of the Sweep LFO is displayed here. When Sync is inac-
tive, the LFO speed is displayed in Hertz. When Sync is active, the
LFO speed is shown as a beat division (or multiplier). The Rate Dis-
play is unique to the plug-in; the original hardware does not have
this feature.
Sweep LEDs The Sweep LEDs, located above the Manual knob, per-
form two functions: LFO rate indication and LFO reset.
Rate
The Sweep LEDs illuminate in tandem with the current Sweep Speed, provid-
ing a visual indication of the LFO rate. The Width amount must be higher than
0% for the LEDs to blink. As Width increases, the blinking is more obvious.
The manner in which the LED response manifests depends on the state of the
Manual, Width, and Speed controls; their quirky behavior is the same as the
original hardware.
Reset
The LEDs provide a mechanism to reset the Sweep LFO so the sweep cycle
can be consistently controlled. The LFO cycle is reset to begin sweeping
“downwards” in pitch (negative sweep) by clicking either LED. This function,
which is not available on the hardware unit, can be automated for mixing or
bouncing.
Normally the Sweep LFO is “free running” but this behavior is not always de-
sirable. For example, you may want playback to always sound exactly the
same when bouncing or mixing. To accomplish this sonic consistency, the
Sweep LFO must be started at a specific place in the LFO cycle by using the
Reset function.
Note: Compensating for additional latency is not required if the host appli-
cation supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs.
Introduced in 1970, the 1073 was found in Neve consoles such as the Wes-
sex A88 and 8014, and has been used on a massive number of popular re-
cordings from the late-20th-century until today. Provide the same unmistak-
able clarity, sheen, and bite to your music that is nearly unattainable with any
other unit, with the Neve 1073 Preamp and EQ Collection for UAD-2 and
Apollo interfaces.
The Neve 1073 for Apollo and UAD-2 provides all the features, unique circuit
behaviors, and coveted sound of Neve's original hardware design. Modeling
the dual-stage “Red Knob” preamp, revered three-band EQ, and post-fader
output amplifier with obsessive detail and thoroughness, Universal Audio’s
Neve 1073 plug-in replicates the experience of its hardware inspiration with
suspension-of-disbelief analog detail and precision. Start from the clear and
punchy “more real than real” 1073 response. Turn it to a warming, class-A
euphonic saturation. Push the circuit even further for audible–but never brit-
tle–dynamically complex, harmonically rich Neve transistor clipping.
UAD Powered Plug-Ins Manual - 266 - Chapter 27: Neve 1073 Preamp & EQ Collection
Neve 1073 Screenshots
UAD Powered Plug-Ins Manual - 267 - Chapter 27: Neve 1073 Preamp & EQ Collection
Figure 79. The Neve 1073 Legacy plug-in window
Neve 1073 The Neve 1073 is based on a vintage “golden unit” channel module pulled
from an original Neve 8014 console, including the original P&G output at-
tenuating fader.
UA's Neve 1073 provides the only authentic, end-to-end circuit model of the
class-A preamp and EQ circuit. An extremely detailed model was made of the
1073, starting with a Marinar input transformer model (and real physical im-
pedance switching when used with Apollo's Unison technology). The trans-
former stage is followed by the Neve dual-transistor preamp (AKA “Red
Knob”) model with non-clipped and clipped nonlinear behaviors, such as
characteristic asymmetric and dynamic duty-cycle clipping.
The three-band active EQ's filter interactions and internal amp clipping be-
haviors are also modeled, along with the passive low cut filter and the EQ's
loading of the preamp output. The plug-in also captures the non-linear behav-
iors of the 1073's post-fader output amplifier, the output transformer, and
much more. There are a total of ten different areas where the circuit can clip.
UAD Powered Plug-Ins Manual - 268 - Chapter 27: Neve 1073 Preamp & EQ Collection
Neve 1073 When physical amplification is not required or circuit non-linearites are not
Legacy desirable, the 1073 Legacy EQ provides a spot-on linear emulation of the
1073's three-band EQ and passive cut filter, complete with modeled filter in-
teraction.
Because the Neve 1073 Legacy does not include nonlinearities of the EQ, nor
modeling of the input and output stages, it uses significantly less UAD DSP re-
sources than the newer Neve 1073. The Neve 1073 Legacy can be even
more desirable than the Neve 1073 when a very clean sound is desired.
Neve 1073SE The Neve 1073SE Legacy is nearly identical to the Neve 1073 Legacy but
Legacy because this plug-in is not upsampled, it provides excellent UAD DSP effi-
ciency.
The Neve 1073SE Legacy interface is differentiated from the Neve 1073 Leg-
acy by color and the module name. The 1073SE is black instead of the
1073’s dark blue, and the module name on the lower right of the interface
panel includes the “SE” suffix after 1073.
Control The following parameters are unique to Neve 1073 and unavailable with
Differences Neve 1073 Legacy and Neve 1073SE Legacy:
• Unison Technology
• Mic/Line Input Select
• Mic Gain
• Impedance
• Pad
• Level
• Output
Unison™ The Neve 1073 features Unison technology for integration with the
Integration mic preamp hardware in Universal Audio’s Apollo audio interfaces.
With Unison, Apollo’s ultra-transparent mic preamps inherit all of the
unique sonics, input characteristics, and features of the Neve 1073 hardware
preamp.
Note: Unison is active only when the Neve 1073 is inserted in the unique IN-
PUT insert within Apollo’s Console application. For complete Unison details,
see the Apollo Software Manual.
UAD Powered Plug-Ins Manual - 269 - Chapter 27: Neve 1073 Preamp & EQ Collection
Realistic Tandem Control
All Apollo mic preamps feature variable input impedance in analog hard-
ware that can be physically changed by Unison plug-ins for physical, micro-
phone-to-preamp resistive interaction. This impedance switching enables
Apollo’s preamps to physically match the emulated unit’s input impedance,
which can significantly impact the sound of a microphone. Because the elec-
trical loading occurs on input, prior to A/D conversion, the realism is faithful
to the original target hardware preamp.
Apollo’s front panel preamp knob can independently adjust the gain and
level parameters available within the Unison plug-in via Gain Stage Mode.
The gain stage being adjusted can be remotely switched via Apollo, so the
gain levels and their associated colorations can be tuned from the hardware
knob for precise physical tactile control, all without using the Unison plug-in’s
software interface.
Artist Presets The Neve 1073 includes artist presets from prominent Neve 1073 users. The
artist presets are in the internal factory bank and are accessed via the host ap-
plication’s preset menu. The artist presets are also placed by the UAD installer
so they can be used within Apollo’s Console application. The presets can be
loaded using the Settings menu in the UAD Toolbar (see “Using UAD Powered
Plug-Ins” in Chapter 7 of the UAD System Manual).
This plug-in includes additional artist presets that are not available in the in-
ternal factory bank. These additional presets can also be accessed using the
Settings menu in the UAD Toolbar.
UAD Powered Plug-Ins Manual - 270 - Chapter 27: Neve 1073 Preamp & EQ Collection
Neve 1073 The Neve 1073 and Neve 1073 Legacy plug-ins use an internal upsampling
Latency technique to achieve sonic design goals. The upsampling results in a slightly
larger latency than most other UAD plug-ins (between 0 and 88 samples, de-
pending on the plug-in and sample rate).
Input Knob The Input knob operates differently with the Neve 1073 which features full in-
Overview put stage modeling, and the Neve 1073/1073SE Legacy plug-ins which do
not model the input stage.
Neve 1073
The Input Gain control (aka the “Red Knob”) adjusts the input gain for both the
mic preamp input and the line input. The gain parameter being controlled
(mic or line) is switched by clicking the MIC or LINE text buttons, or by clicking
the desired value in the opposite gain range.
When the MIC/LINE input is switched, the knob position changes to the gain
range for the input, as shown in Figure 81 below.
Figure 81. Neve 1073 Mic/Line input select buttons and gain knob control ranges
UAD Powered Plug-Ins Manual - 271 - Chapter 27: Neve 1073 Preamp & EQ Collection
The mic input gain and line input gain are actually two separate parameters,
as shown in Figure 82 below. Unlike the original hardware, the knob is con-
strained to control only one gain parameter without switching to the other in-
put type.
Figure 82. Neve 1073 in controls view showing the separate Mic and Line parameters
The Input Gain control sets the level at the input of these plug-ins. Separate
Mic/Line gain controls are unavailable because these plug-ins do not feature
input stage modeling.
Input Select Input Select determines which input (mic or line) is being controlled with the
Gain knob. To change the input gain being controlled, click the MIC or LINE
text to switch to that input.
Tip:Input Select can also be switched by clicking any of the “dots” or gain
value labels in the range for the input type.
When Input Select is changed, the Gain knob changes to use only the range
for that input type (as shown in Figure 81 on page 271).
Like the hardware, the Neve 1073 plug-in easily facilitates sending Line level
signal through the “virtual” Mic input, which allows creative use of distortion
to color signals. This is the equivalent of routing a line level signal into a mic
level input, so a large jump in gain is expected.
Important: Use caution when switching to Mic from Line, as output levels
can increase significantly (as they would with any hardware preamp).
UAD Powered Plug-Ins Manual - 272 - Chapter 27: Neve 1073 Preamp & EQ Collection
When Neve 1073 is used in an INPUT insert within Apollo’s Console
application, software and hardware control of Input Select is mirrored.
Input Select can be changed within the plug-in interface, with Console’s
MIC/LINE buttons, or with Apollo’s hardware buttons (MIC/LINE on Apollo,
or INPUT on Apollo Twin).
Line Gain has a range of 30 dB, available in 5 dB increments. Line Gain can
only be adjusted when Input Select is set to LINE mode.
Like the original hardware, gain is increased as the knob is rotated counter-
clockwise in the plug-in interface. However:
• In Unison mode, Line Gain is increased by turning Apollo’s preamp level
knob clockwise.
• In Controls View mode, Line Gain is increased by moving the control slider
from left to right.
Note: When Line Gain is set to the OFF position, UAD DSP usage is reduced
(unless UAD-2 LoadLock is enabled).
This control sets the level at the input of these plug-ins. The
available continuous gain range is 30 dB.
Tip: Clicking the OFF screen label toggles between OFF and the previously set
Input Gain value. You can also click the Neve logo to toggle between OFF
and the previous state.
UAD Powered Plug-Ins Manual - 273 - Chapter 27: Neve 1073 Preamp & EQ Collection
Mic Gain Mic Gain has a range of 60 dB, available in 5 dB increments. To increase the
mic input gain, rotate the knob clockwise.
Mic Gain can only be adjusted when Input Select is set to MIC mode.
Mic Z The impedance of the mic input is set with the Mic Z switch.
(Impedance) The modeled input impedances have subtle effects on the
signal color and response (even when not used in Unison
mode).
LO
HI
Note: Mic Z is not available for line input, or when used with Apollo’s Hi-Z in-
put in Unison mode. In these cases, the control cannot be switched.
With the original hardware, most studios leave this control in the HI position
(the default value in the plug-in). If an engineer chooses to access the LO set-
ting on the hardware for a low output microphone (such as a ribbon mic), they
need to crawl under the console to access the control on the back of the mod-
ule.
Unison Impedance
UAD Powered Plug-Ins Manual - 274 - Chapter 27: Neve 1073 Preamp & EQ Collection
Pad When enabled, the mic input signal level is attenuated (low-
ered) by –20 dB.
Pad can be used to reduce signal levels when undesirable overload distortion
is present at low preamp gain levels.
Note: Pad is not available for line input, or when used with Apollo’s Hi-Z input
in Unison mode. In these cases, the control cannot be switched.
Tip: Click the “0” text label to return the control to the zero position. This short-
cut is unavailable with Neve 1073/1073SE Legacy.
The inner knob controls the band gain, and the outer ring selects the fre-
quency or band disable. These two controls are detailed below.
Midrange Gain
The equalization gain for the midrange band is selected with the inner knob
of the dual-concentric control. The available range is approximately ±18 dB.
Tip: Click the “0” text label to return the control to the zero position. This short-
cut is unavailable with Neve 1073/1073SE Legacy.
UAD Powered Plug-Ins Manual - 275 - Chapter 27: Neve 1073 Preamp & EQ Collection
Midrange Frequency
The Mid frequency is selected with the outer ring of the dual-concentric knob
controls. The ring control can be dragged with the mouse, or click directly on
the text labels to specify a frequency or disable the Mid band.
Tip:Click the midrange symbol (at lower right of knob) or “KHz” label (at
lower left of knob) to cycle through the available values. Shift + click to step
back one frequency.
The available midrange center frequencies are 360 Hz, 700 Hz, 1.6 kHz,
3.2 kHz, 4.8 kHz, 7.2 kHz, and OFF. When OFF is specified, the band is dis-
abled.
The inner knob controls the band gain, and the outer
ring selects the frequency or band disable. These two
controls are detailed below.
Low Gain
The equalization gain for the low band is selected with the inner knob of the
dual-concentric control. The available range is approximately ±15 dB.
Rotate the control clockwise to boost the selected low band frequency, or
counter-clockwise to reduce the bass response.
Tip: Click the “0” text label to return the control to the zero position. This short-
cut is unavailable with Neve 1073/1073SE Legacy.
Low Frequency
The Low frequency is selected with the outer ring of the dual-concentric knob
controls. The ring control can be dragged with the mouse, or click directly on
the “silkscreen” text to specify a frequency or disable the Low band.
Tip: Click the low shelf symbol (at lower right of knob) or “Hz” label (at lower
left of knob) to cycle through the available values. Shift + click to step back
one frequency.
The available low band center frequencies are 35 Hz, 60 Hz, 110 Hz, 220
Hz, and OFF. When OFF is specified, the band is disabled.
UAD Powered Plug-Ins Manual - 276 - Chapter 27: Neve 1073 Preamp & EQ Collection
High Pass This knob specifies the fixed frequency of the high
pass (low cut) filter. This filter has an 18 dB per octave
slope.
Note: Click the high pass symbol (at lower right of knob) or “Hz” label (at
lower left of knob) to cycle through the available values. Shift + click to step
back one frequency.
Phase The PHASE button inverts the polarity of the signal. When the switch
is engaged (the darker “in” position), the phase is inverted. Leave
the switch in the disengaged (the lighter “out” position) for normal phase.
When the plug-in is used in an INPUT insert within Apollo’s Console ap-
plication, software and hardware control of PHASE is mirrored. Polarity
can be inverted within the plug-in interface, with Console’s polarity button, or
with Apollo’s hardware polarity button.
EQL The equalizer is engaged when the EQL switch is engaged (the
darker “in” position). To disable the EQ, disengage the switch (the
lighter “out” position).
The default position is disabled. Click the button to toggle the state.
UAD DSP usage is reduced when the EQ is bypassed with this control (unless
UAD-2 DSP LoadLock is enabled).
In the hardware 1073, the audio is still slightly colored even when the EQL
switch is disengaged and the EQ settings are in their “flat” positions. This is
due to the fact that the signal is still passing through its circuitry.
UAD Powered Plug-Ins Manual - 277 - Chapter 27: Neve 1073 Preamp & EQ Collection
More notably, all of the filter bands (except High Pass) can have an effect on
the clipping behaviors of the Neve 1073 (except Legacy versions), even
when EQL is disengaged. Therefore, the EQ values can have a significant ef-
fect on the signal when the EQ is “disabled” via the EQL switch.
If a true bypass is desired, use the OFF position of the Power switch (Neve
1073) or the OFF position of the Line Gain control (Neve 1073/1073SE Leg-
acy).
Level Level controls the signal level at the output stage of the module.
The circuitry of an original Neve console fader was modeled for
this control.
Output Output adjusts the signal level at the output of the plug-in without
effecting the sonic character of the signal. The available range is
±24 dB.
This control, which does not exist on the original hardware, facil-
itates the ability to maximize color of the overall signal. For ex-
ample, Gain and Level can be cranked for more distortion, while lowering
Output to normalize levels.
Note: If comparing the Neve 1073 plug-in (when it is not in Unison mode)
with the original hardware, set Output to +10.8 dB so software and hard-
ware levels will match.
Power Power is the plug-in bypass control. When set to OFF, emula-
tion processing is disabled and DSP usage is reduced (if UAD-
2 DSP LoadLock is inactive).
Power is useful for comparing the processed settings to the original signal.
UAD Powered Plug-Ins Manual - 278 - Chapter 27: Neve 1073 Preamp & EQ Collection
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-Neve’s trademarks are being made with written permission from AMS-Neve Limited.
UAD Powered Plug-Ins Manual - 279 - Chapter 27: Neve 1073 Preamp & EQ Collection
CHAPTER 28
Overview
The Neve 1081 channel module was first produced in 1972 by Neve, and
was used to provide the mic/line amp and EQ sections in consoles such as
the Neve 8048. Vintage 8048 consoles, with 1081 modules, are still in wide
use today at classic facilities such as The Village in Los Angeles, and have
been chosen by artists ranging from The Rolling Stones to The Red Hot Chili
Peppers.
Universal Audio’s Neve 1081 EQ delivers the same sonic experience as its
analog cousin with exacting detail. The 1081 EQ also includes a DSP opti-
mized 1081SE EQ for higher instance counts.
UAD Powered Plug-Ins Manual - 280 - Chapter 28: Neve 1081 Equalizer
Neve 1081 and 1081SE Controls
Overview The Neve 1081 channel module is a four-band EQ with high and low cut fil-
ters. The 1081 features two parametric midrange bands, with “Hi-Q” selec-
tions for tighter boosts or cuts. Both the high and low shelf filters have select-
able frequencies and may be switched to bell filters. Other features include a
–20 to +10 dB input gain control, phase reverse, and EQ bypass.
The bands are arranged and grouped as in Figure 84 below. The bands fea-
ture dual-concentric controls. For each of the main bands, the inner knob con-
trols the gain while the outer ring controls the frequency. The low and high cut
filters are grouped as one knob/ring set, but they are actually two indepen-
dent filters.
Band Layout
Input Gain The Input Gain control sets the level at the input of the
plug-in. The range is from –20 dB to +10 dB.
UAD Powered Plug-Ins Manual - 281 - Chapter 28: Neve 1081 Equalizer
High Band The high band delivers smooth high frequency shelving
or peak equalization. The inner knob controls the band
gain, and the outer ring selects the frequency or band
disable.
High Gain
High Frequency
The high band frequency is selected with the outer ring of the dual-concentric
knob controls. The ring control can be dragged with the mouse, or click di-
rectly on the “silkscreen” text to specify a frequency or disable the band.
Note: You can also click the shelving symbol above the knob to cycle through
the available values, or shift + click to step back one frequency.
The available high band center frequencies are 3.3 kHz, 4.7 kHz, 6.8 kHz,
10 kHz, 15 kHz, and OFF. When OFF is specified, the band is disabled.
UAD DSP usage is not reduced when the band is OFF.
The High Peak button switches the high band from a shelving EQ to a
peaking EQ. The band is in shelf mode by default; it is in peak mode
when the button is “down” (darker).
High-Mid Gain
The equalization gain for the high-midrange band is selected with the inner
knob of the dual-concentric control. The available range is approximately
±18 dB.
UAD Powered Plug-Ins Manual - 282 - Chapter 28: Neve 1081 Equalizer
High-Mid Frequency
The high-midrange band frequency is selected with the outer ring of the dual-
concentric knob controls. The ring control can be dragged with the mouse, or
click directly on the “silkscreen” text to specify a frequency or disable the
band.
Note: You can also click the midrange symbol below the knob to cycle
through the available values, or shift + click to step back one frequency.
The available high-mid band center frequencies are 1.5 kHz, 1.8 kHz, 2.2
kHz, 2.7 kHz, 3.3 kHz, 3.9 kHz, 4.7 kHz, 5.6 kHz, 6.8 kHz, 8.2 kHz, and
OFF. When OFF is specified, the band is disabled. UAD DSP usage is not re-
duced when the band is OFF.
High-Mid Q Select
The High Q button switches the response of the high-mid band from
“normal” to a narrower bandwidth for a sharper EQ curve. The band is
in normal mode by default; it’s in high Q mode when the button is
“down” (darker).
Low-Mid Gain
Low-Mid Frequency
The low-midrange band frequency is selected with the outer ring of the dual-
concentric knob controls. The ring control can be dragged with the mouse, or
click directly on the “silkscreen” text to specify a frequency or disable the
band.
Note: You can also click the midrange symbol below the knob to cycle
through the available values, or shift + click to step back one frequency.
UAD Powered Plug-Ins Manual - 283 - Chapter 28: Neve 1081 Equalizer
The available low-mid band center frequencies are 220 Hz, 270 Hz, 330
Hz, 390 Hz, 470 Hz, 560 Hz, 680 Hz, 820 Hz, 1000 Hz,1200 Hz, and
OFF. When OFF is specified, the band is disabled. UAD CPU usage is not re-
duced when the band is OFF.
Low-Mid Q Select
The High Q button switches the response of the low-mid band from “nor-
mal” to a narrower bandwidth for a sharper EQ curve. The band is in
normal mode by default; it’s in high Q mode when the button is “down”
(darker).
Low Band The low band delivers smooth low frequency shelving or
peak equalization. The inner knob controls the band
gain, and the outer ring selects the frequency or band
disable.
Low Gain
Low Frequency
The low band frequency is selected with the outer ring of the dual-concentric
knob controls. The ring control can be dragged with the mouse, or click di-
rectly on the “silkscreen” text to specify a frequency or disable the band.
The available low band center frequencies are 33Hz, 56 Hz, 100 Hz, 180
Hz, 330 Hz, and OFF. When OFF is specified, the band is disabled. UAD
CPU usage is not reduced when the band is OFF.
Note: You can also click the shelving symbol above the knob to cycle through
the available values, or shift + click to step back one frequency.
The Low Peak button switches the low band from a shelving EQ to a
peaking EQ. The band is in shelf mode by default; it is in peak mode
when the button is “down” (darker).
UAD Powered Plug-Ins Manual - 284 - Chapter 28: Neve 1081 Equalizer
Cut Filters The independent low and high cut filters are controlled
by the dual-concentric knobs to the right of the low band
(see Figure 84 on page 281). The controls specify the
fixed frequency of the cut filter. The cut filters have an
18 dB per octave slope.
Note: You can also click the high cut/low cut symbols below the knob to cycle
through the available values, or shift + click to step back one frequency.
High Cut
The inner (blue) dual-concentric knob controls the high cut filter. The available
frequencies for the high cut filter are 18 kHz, 12 kHz, 8.2 kHz, 5.6 kHz, 3.9
kHz, and OFF. When OFF is specified, the high cut filter is disabled. UAD
CPU usage is not reduced when OFF.
Low Cut
The outer (silver) dual-concentric ring controls the low cut filter. The available
frequencies for the low cut filter are 27 Hz, 47 Hz, 82 Hz, 150 Hz, 270 Hz,
and OFF. When OFF is specified, the low cut filter is disabled. UAD CPU us-
age is not reduced when OFF.
Phase The Phase (PH) button inverts the polarity of the signal. When the
switch is in the “In” (lit) position, the phase is reversed. Leave the
switch in the “Out” (unlit) position for normal phase.
EQ Enable The equalizer is engaged when the EQ switch is in the “In” (lighted)
position. To disable the EQ, put the switch in the “Out” (unlit) position.
Click the button to toggle the state.
In the hardware 1081, the audio is still slightly colored even when the EQ
switch is in the Out position. This is due to the fact that the signal is still pass-
ing through its circuitry. Therefore, the signal will be slightly colored when this
switch is in the Out position. UAD DSP usage is reduced when the EQ is by-
passed with this control (unless UAD-2 DSP LoadLock is enabled). If a true by-
pass is desired, use the OFF position of the “Input Gain” on page 281 con-
trol.
UAD Powered Plug-Ins Manual - 285 - Chapter 28: Neve 1081 Equalizer
Neve 1081SE
Overview The UAD Neve 1081SE is derived from the UAD Neve 1081. Its algorithm
has been revised in order to provide sonic characteristics very similar to the
1081 but with significantly less DSP usage. It is provided to allow 1081-like
sound when DSP resources are limited. Nobody with “golden ears” will say
it sounds exactly like the 1081, but it still sounds great and is very usable in
most situations.
The 1081SE interface can be differentiated from the 1081 by color and the
module name. The 1081SE is black instead of the 1081’s dark blue, and the
module name on the lower right of the interface panel includes “SE”.
Neve 1081SE The Neve 1081SE controls are exactly the same as the Neve 1081. Please re-
Controls fer to the Neve 1081 section for Neve 1081SE control descriptions (see
“Neve 1081 and 1081SE Controls” on page 281).
The Neve 1081SE does not require additional latency compensation because
it is not upsampled.
Note: Compensating for Neve 1081 is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-Neve’s trademarks are being made with written permission from AMS-Neve Limited.
UAD Powered Plug-Ins Manual - 286 - Chapter 28: Neve 1081 Equalizer
CHAPTER 29
Overview
The Neve 8068 console, featuring the 31102 EQ, was used to hand-mix one
of the best selling debut albums of all time; Appetite For Destruction by Guns-
N-Roses. Artists ranging from Primus and Metallica to My Morning Jacket and
The Red Hot Chili Peppers have also called on the distinct tone of the Neve
8068 and 31102 EQ in the studio. Universal Audio’s officially licensed and
endorsed Neve 31102 EQ plug-in delivers the same sonic experience as its
analog cousin with exacting detail. Complete with its own distinct filter shap-
ing and unmistakable sheen and bite, the 31102 provides another step in the
evolution of classic Neve EQs. 3-band active EQ and High/Low filters offer
enhanced tone-shaping possibilities and a feature complexity that sits
squarely between its cousins, the 1073 and the 1081.
The Neve 31102/SE EQ is a three band (10, 12 and 16 kHz) high shelving
EQ, a six frequency (7.2, 4.8, 3.2, 1.6, 0.7 and 0.35 kHz) peaking EQ with
two Q types, a four frequency (220, 110, 60 and 35 Hz) low shelving EQ,
a four frequency high pass filter (45, 70, 160 and 360 Hz) and five fre-
quency (6, 8, 10, 14 and 16 kHz) low pass filter. Other features include a 30
dB range of Gain Trim, plus phase reverse and EQ bypass. The UAD Neve
31102 license also includes a DSP-optimized 31102SE “Special Edition” EQ
for higher instance counts.
UAD Powered Plug-Ins Manual - 287 - Chapter 29: Neve 31102 Console EQ
Neve 31102 and 31102SE Controls
Input Gain The Input Gain control sets the level at the input of the plug-
in, and doubles as a plug-in bypass control. The range is
from –20 dB to +10 dB, and off.
Note: (UAD-2 only) UAD-2 DSP usage is reduced only when DSP LoadLock is
disabled. If DSP LoadLock is enabled (the default setting), setting Input Gain
to off will not reduce DSP usage.
Tip: Clickingthe “off” screen label toggles between off and the previously set
Input Gain value. You can also click the Neve logo to toggle between off and
the previous state.
High Shelf The high shelf delivers smooth high frequency shelving
equalization, controlled by dual-concentric knobs. The in-
ner knob controls the band gain, and the outer ring selects
the frequency or band disable.
The gain for the high band is selected with the inner knob of
the dual-concentric control. Rotate the control clockwise to add the famous
high-end Neve sheen, or counter-clockwise to reduce the treble response.
The available range is approximately ±15 dB. The gain value is zero when
the knob position indicator is pointing straight down.
The high shelving frequency is specified with the outer ring of the dual-con-
centric knob. The ring knob pointer can be dragged with the mouse, or click
the shelving symbol above the knob to cycle through the available frequen-
cies (shift+click to step back one frequency).
The available high shelving frequencies are 16 kHz, 12 kHz, 10 kHz, and
off. When off is specified, the high shelf band is disabled. UAD DSP usage is
not reduced when the band is off.
UAD Powered Plug-Ins Manual - 288 - Chapter 29: Neve 31102 Console EQ
Midrange Band The midrange band is controlled by dual-concentric
knobs, delivering smooth semi-parametric midrange
equalization with a choice of two bandwidths. The
inner knob controls the band gain, and the outer
ring selects the frequency or band disable.
Midrange Gain
The equalization gain for the midrange band is selected with the inner knob
of the dual-concentric control. The available range is approximately ±15 dB.
The gain value is zero when the knob position indicator is pointing straight
down.
Midrange Frequency
The midrange frequency is specified with the outer ring of the dual-concentric
knob controls. The ring knob pointer can be dragged with the mouse, or click
the peak/dip symbol above the knob to cycle through the available frequen-
cies (shift+click to step back one frequency).
The available midrange center frequencies are 7.2 kHz, 4.8 kHz, 3.2 kHz,
1.6 kHz, 0.7 kHz, 0.35 kHz, and off. When off is specified, the band is dis-
abled. UAD DSP usage is not reduced when the band is off.
High Q Select
The High Q button switches the response of the midrange band from
“normal” to a narrower bandwidth for a sharper EQ curve. The band is
in normal mode by default; it’s in high Q mode when the button is
“down” (darker).
Low Gain
The equalization gain for the low band is selected with the
inner knob of the dual-concentric control. The available range is approxi-
mately ±15 dB. The gain value is zero when the knob position indicator is
pointing straight down.
UAD Powered Plug-Ins Manual - 289 - Chapter 29: Neve 31102 Console EQ
Rotate the control clockwise to boost the selected low band frequency, or
counter-clockwise to reduce the bass response.
Low Frequency
The low frequency is selected with the outer ring of the dual-concentric knob
controls. The ring knob pointer can be dragged with the mouse, or click the
shelving symbol above the knob to cycle through the available frequencies
(shift+click to step back one frequency).
The available low band center frequencies are 35 Hz, 60 Hz, 110 Hz, 220
Hz, and off. When off is specified, the band is disabled. UAD DSP usage is
not reduced when off.
Cut Filters The independent low and high cut filters are controlled
by the dual-concentric knobs to the right of the low band.
The controls specify the fixed frequency of each cut filter.
High Cut
The inner (blue) dual-concentric knob controls the high cut filter. The available
frequencies for the high cut filter are 18 kHz, 14 kHz, 10 kHz, 8 kHz, 6 kHz,
and off. When off is specified, the high cut filter is disabled.
Low Cut
The outer dual-concentric ring controls the low cut filter. The available fre-
quencies for the low cut filter are 45 Hz, 70 Hz, 160 Hz, 360 Hz, and off.
When OFF is specified, the low cut filter is disabled.
Note: Each cut filter is disabled when its respective knob position indicator is
pointing straight down. UAD DSP usage is not reduced when the cut filters are
off.
Phase The Phase (Ø) button inverts the polarity of the signal. The signal is in-
verted when the button is engaged (darker). Leave the button inactive
(lighter) for normal phase.
UAD Powered Plug-Ins Manual - 290 - Chapter 29: Neve 31102 Console EQ
EQL The equalizer is engaged when the EQL switch is in the “In” (darker)
position. To disable the EQ, put the switch in the “Out” (lighter) posi-
tion. Click the button to toggle the state.
In the hardware 31102, the audio is still slightly colored even when the EQL
switch is in the Out position. This is due to the fact that the signal is still pass-
ing through its circuitry. Therefore, the signal will be slightly colored when this
switch is in the Out position. UAD DSP usage is reduced when the EQ is by-
passed with this control (unless UAD-2 DSP LoadLock is enabled).
If a true bypass is desired, use the OFF position of the Input Gain control (“In-
put Gain” on page 288).
Neve 31102SE
Overview The UAD Neve 33102SE is derived from the UAD Neve 31102. Its algorithm
has been revised in order to provide sonic characteristics very similar to the
31102 but with significantly less DSP usage. It is provided to allow 31102-
like sound when DSP resources are limited. Nobody with “golden ears” will
say it sounds exactly like the 31102, but it still sounds great and is very us-
able in most situations.
The 31102 interface can be differentiated from the 31102 by color and the
module name. The 31102SE background is black instead of the 31102’s
dark blue, and the module name on the lower right of the interface panel in-
cludes “SE”.
Neve 31102SE The Neve 31102SE controls are exactly the same as the Neve 31102. Please
Controls refer to “Neve 31102 and 31102SE Controls” on page 288 for Neve
31102SE control descriptions.
UAD Powered Plug-Ins Manual - 291 - Chapter 29: Neve 31102 Console EQ
Neve 31102 Latency
The Neve 31102 (but not the 31102SE) uses an internal upsampling tech-
nique to facilitate its amazing sonic quality. This upsampling results in a
slightly larger latency than other UAD plug-ins. The latency and its compen-
sation is identical to that of the other UAD Neve EQ’s. See See “Upsampled
Plug-Ins” on page 550. for more information.
The Neve 31102SE does not require additional latency compensation be-
cause it is not upsampled.
Note: Compensating for Neve 31102 is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
One Neve 31102 EQ hardware module and 31102s installed in a Neve 8068 console
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
UAD Powered Plug-Ins Manual - 292 - Chapter 29: Neve 31102 Console EQ
CHAPTER 30
Overview
Derived from the original Neve 2254 compressor, circa 1969, the 33609
stereo bus compressor/limiter utilizes a bridged-diode gain reduction circuit
and many custom transformers. The uniquely musical character of this circuit
made the 33609 a studio standard since its release. The UAD Neve 33609
is the only Neve-sanctioned software recreation of the Neve 33609 (revision
C). Every detail of the original unit is captured, and matches its hardware
counterpart with absolute precision. The 33609 plug-in includes a DSP-opti-
mized 33609SE which allows for higher instance counts.
The UAD Powered Plug-In version of the Neve 33609 adds a few control en-
hancements not found on the hardware: An additional stepped output control
with 20 dB of gain, a link switch allowing ganged left/right control of all pa-
rameters, and a headroom switch, which allows the DAW user to take advan-
tage of the full range of 33609 gain coloration.
UAD Powered Plug-Ins Manual - 293 - Chapter 30: Neve 33609 Compressor
Neve 33609 Screenshot
Operation
The UAD Neve 33609 is a two-channel device capable of running in stereo
or dual-mono modes. The active mode is determined by the mono/stereo
switch (see “Mono/Stereo” on page 298). When the 33609 is used in a
mono-in/mono-out configuration, the channel 2 controls are disabled.
Signal Flow In the 33609, the output of the compressor is fed to the input of the limiter.
Like the original hardware, the signal does not flow “from the left to the right”
of the interface. Understanding this signal flow will help you obtain a more
predictable result (see Figure 89 below).
UAD Powered Plug-Ins Manual - 294 - Chapter 30: Neve 33609 Compressor
Modeling The UAD Neve 33609 models all aspects of the original 33609 hardware,
including the desirable harmonic distortion characteristics. These qualities are
more prominent at higher input levels (see “Headroom” on page 300” for
more info).
When the compressor and limiter are both disabled, some (good) coloration
of the signal occurs, just like the hardware. If a true bypass is desired, use the
power switch (“Power” on page 302) to disable the plug-in.
Technical Article The article “Ask the Doctors: Modeling of the Neve 33609 compressor/lim-
iter” contains interesting technical details about the 33609. It is available at
our online webzine:
• http://www.uaudio.com/webzine/2006/august/index2.html
Limiter
Controls in this section only function
when the limiter is enabled with the
“limit In” switch (the Power switch must
also be on).
Limiter Threshold determines how much limiting will occur. When the input signal ex-
Threshold ceeds the threshold level, the signal above the threshold is limited. A smaller
value results in more limiting. The available range is from +4 dB to +15 dB,
in 0.5 dB increments.
Limiter Recovery Recovery (release) is the time it takes for the limiter to stop processing after the
signal drops below the threshold value. The available values (in milliseconds)
are 50, 100, 200, 800, a1, and a2.
UAD Powered Plug-Ins Manual - 295 - Chapter 30: Neve 33609 Compressor
The automatic settings (a1 and a2) are program dependant. The value for a1
can be as fast as 40ms, but after a sustained period of high signal level, the
period is ≈1500ms. The value for a2 can be as fast as 150ms, but after a sus-
tained period of high signal level, the period is ≈3000ms.
Limiter In This toggle switch enables the limiter portion of the plug-in. The limiter has no
effect unless this switch is in the “In” (down) position.
Attack Attack determines how fast limiting will engage when the signal exceeds the
limiter threshold. The Fast setting is 2 milliseconds, and the Slow setting is 4
milliseconds.
Compressor
Controls in this section only function when the compressor is enabled with the
“compress In” switch (the Power switch must also be on).
Note: The compressor precedes the limiter (see “Signal Flow” on page 294).
Compressor Threshold determines how much compression will occur. When the input sig-
Threshold nal exceeds the threshold level, the compressor engages. A smaller value re-
sults in more compression. The available range is from –20 dB to +10 dB, in
2 dB increments.
Compressor Recovery (release) is the time it takes for the compressor to stop processing af-
Recovery ter the signal drops below the threshold value. The available values (in milli-
seconds) are 100, 400, 800, 1500, a1, and a2.
The automatic settings (a1 and a2) are program dependant. The value for a1
can be as fast as 40ms, but after a sustained period of high signal level, the
period is ≈800ms. The value for a2 can be as fast as 150ms, but after a sus-
tained period of high signal level, the period is ≈1500ms.
UAD Powered Plug-Ins Manual - 296 - Chapter 30: Neve 33609 Compressor
Compressor This makeup gain control increases the signal level out of the compressor to
Gain compensate for reduced levels as a result of compression. The available
range is 0 to +20 dB, in 2 dB increments.
Make sure to adjust the Gain control after the desired amount of compression
is achieved with the Threshold control. The Gain control does not affect the
amount of compression.
Note: If the limiter is also enabled, this gain is applied before the limiter stage.
Ratio This control determines the compressor ratio. The available values are 1.5:1,
2:1, 3:1, 4:1, and 6:1, selectable in discrete increments.
Compressor In This toggle switch enables the compressor portion of the plug-in. The compres-
sor has no effect unless this switch is in the “In” (down) position.
Other Controls
The interface elements that are not directly contained within the compressor or
limiter are detailed below.
Output Gain This control is a software-only addition not found on the original hardware. It
is an overall makeup gain stage at the output of the plug-in to compensate for
reduced levels as a result of compression and/or limiting. The available
range is –2 to +20 in 1 dB increments.
Gain Reduction The Gain Reduction Meters indicate the amount of gain reduction that is oc-
Meters curring in dB. There is one meter for each channel. The gain reduction dis-
played is the total reduction of the limiter plus the compressor.
UAD Powered Plug-Ins Manual - 297 - Chapter 30: Neve 33609 Compressor
Note: The meter indicator moves farther to the right as more gain reduction is
occurring. This meter behavior is opposite that of many compressors.
Link This switch is a software-only addition that allows the two sets of controls for
each channel to be linked for ease of operation when both channels require
the same values, or unlinked when dual-mono operation is desired. The Link
parameter is stored within presets and can be accessed via automation.
Unlink
When set to unlink (up position), the controls for channels one and two are
completely independent. Unlink is generally used in mono mode. When un-
linked, automation data is written and read by each channel separately.
Note: When unlink is switched to link, channel 1 controls are copied to chan-
nel 2. Control offsets between channels are lost in this case.
Link
When set to link (down position), modifying any channel one or channel two
control causes its adjacent stereo counterpart control to snap to the same po-
sition (channel 1 & 2 controls are ganged together in link mode).
When link is active, automation data is written and read for channel one
only. In this case, the automation data for channel one will control both chan-
nels.
Note: When link is active, changing channel two parameters from a control
surface or when in “controls only” (non-GUI) mode will have no effect.
Mono/Stereo The Neve 33609 can operate in true stereo or dual-mono mode. This switch
determines the active mode.
Mono
In mono mode, channels 1 and 2 are completely independent and the 33609
functions as a dual-mono device, each channel with its own compressor and
limiter.
Note:To read and write automation data for both channels independently
when in mono mode, link mode must be disabled.
UAD Powered Plug-Ins Manual - 298 - Chapter 30: Neve 33609 Compressor
Stereo
In stereo mode, the left channel is fed to the channel one compressor, and the
right channel is fed to the channel two compressor. The two compressors are
constrained so that they both compress the same amount at any instant. This
prevents transients which appear only on one channel from shifting the image
of the output. Any big transient on either channel will cause both channels to
compress. The amount of compression will be similar to the amount of com-
pression for a transient which appears on both channels at the same time.
In stereo operation the controls for channels 1 and 2 are independent and
can be set separately. Generally, the channel with the “most processing oc-
curring” controls the processing for the other channel. For example, if the
same signal is fed to both channels in stereo mode and channel 1 has a lower
threshold setting than channel 2, the channel 1 threshold value is used for
both channels. Similarly, if channel 1 were disabled (using “In” switches),
channel 2 settings would be used because “more processing” occurs with the
channel 2 settings. It's not always so simple though, as in the following cases:
• If you feed the same signal into both channels, you can have a lower thresh-
old with a lower ratio on one channel, and a higher threshold with a higher
ratio on the other channel. In this case, you will get a double knee, with the
lower ratio being used between the knees, and the higher ratio above both
knees.
• If you feed the same signal into both channels, you can have a lower thresh-
old with a faster release on one channel, and a higher threshold with a
slower release in the other channel. In this case, you will get a two-stage re-
lease after a transient, with the first channel releasing at the fast rate until
you get down to where the other one is; then the release will continue at the
slower rate.
Expert Question
Is there any reason I would want to use stereo mode and still have the settings
for the two channels different?
Yes. Linking the sidechains simply prevents left-right image shifting. Threshold,
attack, and recovery can be set independently to cause the compressor to be
more sensitive to instruments which are panned to one side or the other. Out-
put controls can be set separately in order to correct an overall image shift at
the output.
UAD Powered Plug-Ins Manual - 299 - Chapter 30: Neve 33609 Compressor
Headroom Background
The hardware Neve 33609 can accept an analog signal level of approxi-
mately +26 dBu before undesirable signal clipping occurs. As the signal in-
creases up to this point however, desirable audio-path nonlinearities and
“good” harmonic distortion characteristics occur. This musically pleasing
“warmth” at higher levels is what gives the unit much of its revered sonic char-
acter. Because analog mixing consoles can typically output high signal levels,
audio engineers often take advantage of the ability to “push” the hardware
33609 into the colorful arena.
This complete pallet of sonic nuance, including the dynamic input response,
is captured in the UAD Neve 33609 model. The plug-in is calibrated inter-
nally so that 0 dBFS at its input is equivalent to an input level of approximately
+26 dBu on the 33609 hardware, where the coloring is more prominent. The
result is that a typical signal within a DAW will drive the UAD Neve 33609
into these “virtual” higher levels, resulting in fairly high amounts gain reduc-
tion.
Headroom Switch
Headroom can be set to 22 dB, 18 dB, or 14 dB. At 22 dB, signals will push
the plug-in into gain reduction (and more non-linearity and “good” harmonic
distortion) more easily. Set the switch to a lower value when less gain reduc-
tion and color is desired.
The numbers on the switch indicate where 0 dBFS falls relative to nominal +4
dBu. For example, with 22 dB of headroom, 0 dBFS corresponds to +4 dBu
+ 22 dB = 26 dBu. With 18 dB of headroom, 0 dBFS corresponds to +4 dBu
+ 18 dB = 22 dBu. The headroom selected will cause the plug-in to behave
as though it were a hardware 33609 connected to a nominal +4 dBu inter-
face with the selected amount of headroom. Industry standards for most DAW
interfaces are +14 dB and +18 dB headroom. The +22 dB setting approxi-
mates some analog mixing environments, and allows the entire useful dy-
namic range of the 33609 to be exercised.
The following settings are application guidelines for the Headroom switch:
UAD Powered Plug-Ins Manual - 300 - Chapter 30: Neve 33609 Compressor
22 dB
Typical starting point for individual track inserts where maximum gain reduc-
tion is desired. This setting is equivalent to having a real hardware 33609
connected to a +4 interface with +22 dB headroom.
18 dB
Typical starting point when used on a buss or group where nominal gain re-
duction is desired. This setting is equivalent to having a real hardware 33609
connected to a +4 interface with +18 dB headroom.
14 dB
Typical starting point for mastering where minimal gain reduction is de-
sired. This setting is equivalent to having a real hardware 33609 connected
to a +4 interface with +14 dB headroom.
Note: Keep in mind there are no hard and fast rules. Use the above recom-
mendations as guidelines and feel free to experiment with the various posi-
tions of the headroom switch regardless of the audio source. If it sounds
good, use it!
Factory Presets The UAD Neve 33609/33609SE includes a bank of factory presets. These
presets can be useful starting points for your particular source audio.
The factory preset names begin with MSTR, BUSS, or TRAK. These indicate
the setting of the headroom parameter. (14 dB, 18 dB, and 22 dB respec-
tively).
Mastering (MSTR) presets are optimized for mixed program material that is al-
ready at a relatively high level.
Track (TRAK) presets are optimized for track inserts where signal levels typi-
cally aren’t as hot as groups or outputs.
The preset names are guidelines and not rules. In many cases, you can use
any preset on any source with good results. You will probably need to adjust
the threshold and/or gain controls to obtain the optimum results with your par-
ticular source audio.
UAD Powered Plug-Ins Manual - 301 - Chapter 30: Neve 33609 Compressor
Power The Power switch determines whether the plug-in is active. This is useful for
comparing the processed settings to the original signal, or to bypass the plug-
in to reduce the UAD DSP load (load is not reduced if UAD-2 DSP LoadLock
is enabled). Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
You can click-hold the power switch then drag it like a slider to quickly
Note:
compare the enabled/disabled state.
Neve 33609SE
Overview The UAD Neve 33609SE is derived from the UAD Neve 33609. Its algorithm
has been revised in order to provide sonic characteristics very similar to the
33609 but with significantly less DSP usage. It is provided to allow 33609-
like sound when DSP resources are limited. Nobody with “golden ears” will
claim it sounds exactly like the 33609, but it still sounds great and is very us-
able in most situations.
The 33609SE interface can be differentiated from the 33609 by color and
the module name. The 33609SE background is black instead of the 33609’s
blue/grey, and the module name below the link switch includes “SE”.
Neve 33609SE The Neve 33609SE controls are exactly the same as the Neve 33609. Please
Controls refer to the Neve 33609 section for Neve 33609SE control descriptions (see
“Neve 33609 and 33609SE Controls” on page 295).
Note: The Neve 33609SE does not require additional latency compensation
because it is not upsampled.
UAD Powered Plug-Ins Manual - 302 - Chapter 30: Neve 33609 Compressor
Note: Compensating for Neve 33609 is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
UAD Powered Plug-Ins Manual - 303 - Chapter 30: Neve 33609 Compressor
CHAPTER 31
Overview
In 2001, Neve launched the 88 Series: A new, large-format analog console
that represented the best of all Neve designs that came before it. Considered
the ultimate console for modern features and reliability, it is also heralded as
one of the best-sounding consoles ever made by veterans of both the audio
and film communities. The 88RS has found a home in some of the finest rooms
and scoring stages around the world, including Ocean Way, Abbey Road,
AIR, The Village, Sony Pictures, 20th Century Fox and Skywalker Sound.
With a rich palette of modern sound-sculpting tools, the Neve 88RS Channel
Strip captures the EQ and dynamics section from Neve's flagship console.
The controls comprise 12 dB per octave high and low cut filters, a four-band
EQ plus limiting, compression, gate and expansion. The middle EQ bands
are fully parametric, while the flexible high and low bands provide the user
with two fixed-Q types and the ability to switch to shelving EQ.
Additionally, the user may engage the P-DYN button to reorder the signal
chain so that the EQ is first. With the SC-EQ button, the user may engage a
sidechain feature to achieve frequency-dependent compression for such use-
ful tasks as de-essing.
UAD Powered Plug-Ins Manual - 304 - Chapter 31: Neve 88RS Channel Strip
Neve 88RS Screenshot
UAD Powered Plug-Ins Manual - 305 - Chapter 31: Neve 88RS Channel Strip
Neve 88RS Controls
Overview The UAD Neve 88RS controls are divided into four main sections: dynamics,
EQ, cut filters, and global. Each section and control is detailed below.
Signal Flow The output of the cut filters is fed to the input of the dynamics or EQ section
(dependent upon the Pre-Dyn switch). Understanding this signal flow will help
you obtain a more predictable result (see Figure 92 below).
Input
Dynamics
Cut Gate/Exp Output
VCA EQ
Filters Gain
Comp/Limit
Dynamics
The dynamics section consists of a gate/expander and a lim-
iter/compressor. The controls for each of these two dynamics pro-
cessors are arranged in vertical columns, with the gate/expander
controls in the left column, and the limiter/compressor controls in
the right column. Both processors can be individually activated or
disabled.
UAD Powered Plug-Ins Manual - 306 - Chapter 31: Neve 88RS Channel Strip
Gate/Expander
The gate/expander module operates in either gate or expansion mode. In
gate mode, signals below the threshold are attenuated by the range (RGE)
amount (see Figure 93 on page 307), and hysteresis is available (see
Figure 94 on page 308).
You can use this button to compare the gate/expander settings to that of the
original signal, or to bypass the module altogether. UAD DSP load is reduced
when this module is inactive (unless UAD-2 DSP LoadLock is enabled).
UAD Powered Plug-Ins Manual - 307 - Chapter 31: Neve 88RS Channel Strip
Gate/Exp The Hysteresis knob sets the difference in threshold for signals
Hysteresis that are either rising or falling in level. Signals that are rising
(HYST)
in level are passed when the level reaches the threshold value
plus the hysteresis value. Signals that are falling in level are
not passed at the lower threshold level. Up to 25 dB of hys-
teresis is available. See Figure 94 on page 308.
Hysteresis makes the gate less susceptible to “stuttering” by making the thresh-
old value dependent upon whether the gate is off or on. Raising the threshold
for rising signal levels prevents noise from turning the gate on, while allowing
a lower threshold for falling levels. This prevents reverb tails from being pre-
maturely gated. For example, if the threshold is set at –50 and the hysteresis
is set at 10, the level would have to rise above –40 dB before the signals
pass, and the gate would remain open until the level falls below –50 dB.
This control also activates expander mode. Rotating Hysteresis fully counter-
clockwise switches the gate off and the 1:2 downward expander on.
Note: Expander mode can also be activated by clicking the EXP label text
near the knob. When EXP is clicked again, the knob returns to the previous
value in gate mode.
UAD Powered Plug-Ins Manual - 308 - Chapter 31: Neve 88RS Channel Strip
The available range is –25 dB to +15 dB. A range of –25 dB to –65 dB is
available when the –40 dB switch is engaged (see “Gate/Exp Threshold –40
dB” on page 309).
In typical use it’s best to set the threshold value to just above the noise floor of
the desired signal (so the noise doesn’t pass when the desired signal is not
present), but below the desired signal level (so the signal passes when
present).
Gate/Exp The –40 dB button increases the sensitivity of the gate and ex-
Threshold pander by lowering the range of the available threshold values.
–40 dB
When –40 dB mode is active, the threshold range is –25 dB to
–65 dB. When –40 is inactive, the threshold range is –25 dB to
+15 dB.
To activate –40 dB mode, click the “pull –40” label text or the red indicator
just below the Threshold control. –40 dB mode is active when the red indica-
tor illuminates.
Gate/Exp Range Range (RGE) controls the difference in gain between the
(RGE) gated/expanded and non-gated/expanded signal. Higher val-
ues increase the attenuation of signals below the threshold.
When set to zero, no gating or expansion occurs. The avail-
able range is 0 dB to –60 dB.
Gate/Exp Fast The Fast mode switch defines the gate/expander attack time,
which is the duration between the input signal reaching the thresh-
old and processing being applied. Two times are available: 500
microseconds (when Fast is off) and 50 microseconds (when Fast
is active).
To activate Fast mode, click the “pull FAST” label text or the red indicator just
below the Range (RGE) control. Fast mode is active when the red indicator il-
luminates.
Gate/Exp Release sets the amount of time it takes for processing to disen-
Release (REL) gage once the input signal drops below the threshold level. The
available range is 10 milliseconds to 3 seconds.
Slower release times can smooth the transition that occurs when
the signal dips below the threshold, which is especially useful
for material with frequent peaks.
UAD Powered Plug-Ins Manual - 309 - Chapter 31: Neve 88RS Channel Strip
Note: Fast release times are typically only suitable for certain types of percus-
sion and other instruments with very fast decays. Using fast settings on other
sources may produce undesirable results.
Gate/Exp Meter This meter displays the amount of gain attenuation (downward
expansion) occurring in the gate/expander module.
Limiter/Compressor
The limiter/compressor module offers a continuously variable ratio between
1:1 (no compression) and infinity:1 (limiting). Signals above the threshold are
attenuated according to the ratio (RAT) value. Two attack speeds and contin-
uously variable release times are available, along with a pleasing automatic
triple time-constant program-dependent release mode (auto mode has a three-
stage release). A makeup gain control and a hard/soft knee setting are also
available in the module.
From the AMS-Neve 88RS User Manual: “Anti pumping and breathing cir-
cuitry allows the unit to operate on the source musically whilst retaining abso-
lute control over the dynamic range.”
The 88RS compressor has another nifty property: Two thresholds. When the
signal falls below the threshold, the compressor is releasing. But, if the signal
falls below a second (non-adjustable) threshold, which is roughly 40 dB be-
low the adjustable threshold value, then the release slows down drastically.
This acts as a “silence detector.” The concept is that if there is a quiet signal,
then the compressor should release to reduce the dynamic range. But if there
is a sudden onset of silence, it is likely that, when the signal returns, it will be
at about the same level as the region before the silence. So in that case, the
compressor doesn't release quickly.
UAD Powered Plug-Ins Manual - 310 - Chapter 31: Neve 88RS Channel Strip
Note: For additional information, see “The LA-2 captures one of the earliest
Teletronix examples. This exceedingly rare unit preceded the LA-2A by a few
years and incredibly, still has the original T4A fully intact. The LA-2 provides
the slowest response and a unique “mellowed” sound due to 50 years of lu-
minescent panel aging inside the T4 module. Use the LA-2 with legato tempos
and your most vowel-like sources for a transparency and sublime mood unlike
any other compressor.” on page 505.
L/C Enable This button activates the limiter/compressor module. The mod-
(L/C) ule is active when the button is gray and the green indicator il-
luminates.
You can use this button to compare the limiter/compressor settings to that of
the original signal, or to bypass the module altogether. UAD DSP load is re-
duced when this module is inactive (unless UAD-2 DSP LoadLock is enabled).
L/C Gain The Gain control adjusts the output level of the limiter/com-
pressor module. The available range is 0 dB to 30 dB.
L/C Hard Knee Normally, the limiter and compressor operate with soft knee char-
(HN) acteristics. This switch gives the limiter and compressor a hard knee
instead.
To activate Hard Knee mode, click the “pull HN” label text or the
red indicator just below the Gain control. Hard Knee mode is active when the
red indicator illuminates.
L/C Threshold Threshold defines the input level at which limiting or compres-
sion begins. Signals that exceed this level are processed. Sig-
nals below the threshold are unaffected.
UAD Powered Plug-Ins Manual - 311 - Chapter 31: Neve 88RS Channel Strip
Note: As the Threshold control is increased and more processing occurs, out-
put level is typically reduced. Adjust the Gain control to modify the output of
the module to compensate if desired.
L/C Threshold The –20 dB switch increases the sensitivity of the limiter/compres-
–20 dB sor by lowering the range of the available threshold values. When
–20 dB mode is active, the threshold range is 0 dB to –30 dB.
When –20 is inactive, the threshold range is +20 dB to –10 dB.
To activate –20 dB mode, click the “pull –20” label text or the red indicator
just below the Threshold control. –20 dB mode is active when the red indica-
tor illuminates.
L/C Ratio (RAT) Ratio defines the amount of gain reduction to be processed by
the module. For example, a value of 2 (expressed as a 2:1 ra-
tio) reduces the signal by half, with an input signal of 20 dB
being reduced to 10 dB.
L/C Fast The Fast mode switch defines the attack time (the duration between
the input signal reaching the threshold and processing being ap-
plied) of the limiter and compressor.
To activate Fast mode, click the “pull FAST” label text or the red indicator just
below the Ratio (RAT) control. Fast mode is active when the red indicator illu-
minates.
L/C Release Release sets the amount of time it takes for processing to
cease once the input signal drops below the threshold level.
The available range is 10 milliseconds to 3 seconds, and au-
tomatic.
UAD Powered Plug-Ins Manual - 312 - Chapter 31: Neve 88RS Channel Strip
Slower release times can smooth the transition that occurs when the signal
dips below the threshold, which is especially useful for material with frequent
peaks. However, if the release is too long, compression for sections of audio
with loud signals may extend to sections of audio with lower signals.
Note: Fast release times are typically only suitable for certain types of percus-
sion and other instruments with very fast decays. Using fast settings on other
sources may produce undesirable results.
L/C Meter This meter displays the amount of gain attenuation occurring in
the limiter/compressor module.
EQ
The UAD Neve 88RS “Formant Spectrum EQ” (AMS-Neve's descriptor) is di-
vided into four frequency bands (see Figure 95 on page 314): High Fre-
quency (HF), High Midrange Frequency (HMF), Low Midrange Frequency
(LMF), and Low Frequency (LF). The high and low bands can be switched into
shelving and/or High-Q modes. The two midrange bands are fully paramet-
ric. The EQ module can be disabled altogether.
When the high frequency (HF) and/or low frequency (LF) band is in shelf
mode, the band gain affects the band frequency. As gain is increased, the
shelf frequency more closely matches the knob value. As gain is reduced how-
ever, the low shelving frequency moves higher, and the high shelving fre-
quency moves lower.
With the UAD Neve 88RS EQ, the Q value and range is dependent on the
gain setting of the band. With any non-zero gain setting, the Q will be calcu-
lated in real-time for that band. But if the band gain is zero, Q will always dis-
play zero.
“The unique sound of AMS-Neve EQ is the result of years of research and ex-
tensive studio experience.”
UAD Powered Plug-Ins Manual - 313 - Chapter 31: Neve 88RS Channel Strip
88RS EQ Band
Layout
EQ module
enable switch
High Frequency
(HF) band controls
Low Frequency
(LF) band controls
EQ Enable (EQ) This button activates the equalizer module. The module is ac-
tive when the button is gray and the green indicator illumi-
nates.
You can use this button to compare the equalized signal to the original signal
or bypass the EQ altogether. UAD DSP load is reduced when this module is
inactive (unless UAD-2 DSP LoadLock is enabled).
UAD Powered Plug-Ins Manual - 314 - Chapter 31: Neve 88RS Channel Strip
HF Freq This parameter determines the HF band center frequency to
be boosted or attenuated by the band Gain setting. The
available range is 1.5 kHz to 18 kHz.
HF Gain This control determines the amount by which the frequency set-
ting for the HF band is boosted or attenuated. The available
range is ±20 dB.
HF Hi-Q Enable The filter slope of the HF band can be changed with this control.
When Hi-Q is off, the Q is 0.7. When Hi-Q is active, the Q is 2.
Higher Q values mean the peak (or trough) has steeper slopes.
Hi-Q is active when the button is gray and the yellow indicator illuminates. Hi-
Q is off by default.
HF Shelf Enable The HF band can be switched from bell mode to shelving mode by
clicking the shelf enable button. Shelf mode is active when the but-
ton is gray and the yellow indicator illuminates. Shelf is off by de-
fault.
HMF Freq This control determines the HMF band center frequency to be
boosted or attenuated by the HMF Gain setting. The available
range is 800 Hz to 9 kHz.
HMF Gain This control determines the amount by which the frequency set-
ting for the HMF band is boosted or attenuated. The available
range is ±20 dB.
UAD Powered Plug-Ins Manual - 315 - Chapter 31: Neve 88RS Channel Strip
LMF Freq This control determines the LMF band center frequency to be boosted or at-
tenuated by the LMF Gain setting. The available range is 120 Hz to 2 kHz.
LMF Gain This control determines the amount by which the frequency setting for the LMF
band is boosted or attenuated. The available range is ±20 dB.
LF Freq This parameter determines the LF band center frequency to be boosted or at-
tenuated by the band Gain setting. The available range is 33 Hz to 440 kHz.
LF Gain This control determines the amount by which the frequency setting for the LF
band is boosted or attenuated. The available range is ±20 dB.
LF Shelf Enable The LF band can be switched from bell mode to shelving mode by clicking the
shelf enable button. Shelf mode is active when the button is gray and the yel-
low indicator illuminates. Shelf is off by default.
LF Hi-Q Enable The filter slope of the LF band can be switched with this control. When Hi-Q
is off, the Q is 0.7. When Hi-Q is active, the Q is 2. Higher Q values mean
the peak/trough has steeper slopes.
Hi-Q is active when the button is gray and the yellow indicator illuminates. Hi-
Q is off by default.
Cut Filters
In addition to the four-band EQ, UAD Neve 88RS offers
two cut filters, one each for low and high frequencies.
The slope of the cut filters is 12 dB per octave. Each cut
filter has two controls: Cut Enable and Frequency. Both
controls are detailed below.
Note: UAD DSP load is not reduced when the cut filters
are disabled.
UAD Powered Plug-Ins Manual - 316 - Chapter 31: Neve 88RS Channel Strip
Cut Enable This button activates the cut filter. The cut filter is active when the
button is gray and the red indicator illuminates.
Cut Frequency This knob determines the cutoff frequency for the cut filter.
The available range is 7.5 kHz to 18 kHz for the high cut fil-
ter (lighter blue control), and 31.5 Hz to 315 Hz for the low
cut filter (darker blue control).
Global
Sidechain EQ This control enables the UAD Neve 88RS sidechain function.
(SC-EQ) When sidechain is active, signal output from the EQ module is re-
moved from the audio path and is instead routed to control the dy-
namics module.
Note: The EQ module must be active in conjunction with SC-EQ for the
sidechain to function (see “EQ Enable (EQ)” on page 314).
Pre-Dynamics This button re-routes the UAD Neve 88RS signal. Normally, the au-
(P-DYN) dio signal is routed from the dynamics module into the EQ module
(i.e., the EQ is post-dynamics). When P-DYN is enabled, the EQ
module precedes the dynamics module.
Pre-dynamics is active when the button is gray and the red indicator illumi-
nates.
Phase The Phase (Ø) button inverts the polarity of the signal. The signal is
inverted when the button is gray and the red indicator illuminates.
Leave the button inactive (unlit) for normal phase.
Output The Output knob controls the signal level that is output from the
plug-in. The default value is 0 dB. The available range is ±20
dB.
UAD Powered Plug-Ins Manual - 317 - Chapter 31: Neve 88RS Channel Strip
Power The Power switch determines whether the plug-in is active. This is
useful for comparing the processed settings to the original signal
or bypassing the plug-in to reduce the UAD DSP load (load is not
reduced if UAD-2 DSP LoadLock is enabled).
Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
You can click-hold the power switch then drag it like a slider to quickly
Note:
compare the enabled/disabled state.
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
UAD Powered Plug-Ins Manual - 318 - Chapter 31: Neve 88RS Channel Strip
CHAPTER 32
Developed by Universal Audio and Allen Sides, the Ocean Way Studios
plug-in re-writes the book on what’s possible with acoustic space emulation.
By combining elements of room, microphone and source modeling, Ocean
Way Studios moves far beyond standard impulse response players and re-
verbs — giving you an authentic dynamic replication of one of the world’s
most famous recording studios.
Ocean Way Studios allows you to virtually book unlimited time at Ocean
Way Recording in Hollywood, California (formerly a part of United/Western
Recorders). This plug-in provides everything you need to help make your mu-
sic sound as if it were recorded in the beautifully balanced, performance-in-
spiring rooms that were designed and built by modern recording pioneer and
Universal Audio founder M.T. “Bill” Putnam.
UA's proprietary Dynamic Room Modeling combines DSP and exclusive mea-
surement techniques to reinvent room ambience processing. The end result is
an uncanny recreation of Ocean Way's iconic studio rooms A and B. By na-
ture of its specialization, the Ocean Way Studios plug-in invites its users to ex-
plore the entire space of these never-before-available temples of legendary
sound.
Allen Sides’ microphone setups are the centerpiece of Ocean Way Studios.
They capture the ideal microphone selections and placements for each room
and source type, and create Ocean Way Studios' fundamental sound. Mr.
Sides' eight expertly chosen positions are featured per studio as discrete in-
strument or vocal source selections; each is designed to recreate its inherent
UAD Powered Plug-Ins Manual - 319 - Chapter 32: Ocean Way Studios
dispersion patterns. This enables users to recreate the same set-ups used to
record some of the biggest acts of all time — including Michael Jackson, Ma-
donna, U2, Ray Charles, Radiohead, Beck, Tom Petty, The Rolling Stones,
and many, many more.
Even the unique consoles in each room have been incorporated into the over-
all sound — the Ocean Way Recording-modified Focusrite ISA 110 console
in Studio A, and the famous custom-modified Putnam/Dalcon console in Stu-
dio B.
UAD Powered Plug-Ins Manual - 320 - Chapter 32: Ocean Way Studios
What Is Ocean Way Studios?
Ocean Way Studios is a dynamically adjustable room emulator for adding
the ambience of Ocean Way Recording’s acclaimed studios A or B to audio
signals.
Figure 97. Interior photos of Room A (left) and Room B (right) at Ocean Way Recording
Ocean Way Studios offers two modes of operation. It can be used as a tra-
ditional reverb using send/return paths mixed with dry signals, or as a
“Re-Mic” processor when full immersion of the original source audio within
Ocean Way’s studio spaces is desired.
Re-Mic mode is by nature “fully wet” and includes the impulse response’s “di-
rect” signal. Re-Mic can be used to entirely replace previous rooms and mi-
crophones, or create new complimentary room sounds.
Allen Sides Ocean Way Studios was collaboratively developed under the creative direc-
tion of renowned producer/engineer Allen Sides. As the owner/operator of
Ocean Way Recording for more than 30 years (see “The History of Ocean
Way Recording” on page 346), his knowledge of how to record various
sources within these studios is integral to the high quality results that can be
achieved with Ocean Way Studios.
Microphones Allen Sides is not only known for his audio engineering expertise, but also for
his collection of prized microphones. The specific microphones that were
used to develop Ocean Way Studios, and their placement positions on a va-
riety of sources, were selected by Mr. Sides himself.
UAD Powered Plug-Ins Manual - 321 - Chapter 32: Ocean Way Studios
Hybrid Ocean Way Studios is not a general impulse response (“IR”) convolution re-
Technology verb nor a typical algorithmic reverb. Instead, Ocean Way Studios utilizes
breakthrough hybrid technologies, combining expertly sampled impulse re-
sponses with advanced algorithmic DSP techniques.
Concise Ocean Way Studios focuses on a limited set of studio spaces and exhaus-
Modeling tively models numerous room positions, microphones, and sound source dis-
persion patterns — which all combine to provide the ultimate in acoustic re-
alism. Ocean Way Studios is sonically superior in terms of overall model
accuracy and dynamic customization.
Note: Switching through presets is not instantaneous and sonic artifacts can
occur while the presets are loading. See “Load Time” on page 333 for re-
lated information.
UAD Powered Plug-Ins Manual - 322 - Chapter 32: Ocean Way Studios
Operational Overviews
Overviews of important underlying concepts are presented below. For details
about how to operate the specific controls, see “Ocean Way Studios Con-
trols” beginning on page 335.
Modes Overview
Ocean Way Studios offers two modes of operation: Re-Mic and Reverb.
These modes process signals in fundamentally different ways.
Recorded Sound Whenever a sound source is recorded in a naturally reverberant space, there
Components are three primary sound components (Figure 98) that are captured by the mi-
crophone:
1. The direct signal. This is the sound path that travels directly between the
source and the microphone, without any reflected sounds from the walls,
floor, ceiling, and objects.
2. The early reflections. These are the still-distinct individual reflections that are
reflected off the walls, floor, ceiling, and objects before reaching the micro-
phone.
3. The late field (aka reverb tail or ambience). This is the indistinct “wash” that
decays over time, comprised of all reflections in the room. The tail is usually
considered the main component of reverb.
UAD Powered Plug-Ins Manual - 323 - Chapter 32: Ocean Way Studios
It’s important to notice that the recorded direct signal component (#1 on pre-
vious page) is different than pre-existing dry (unprocessed) acoustic record-
ings in a DAW. This is because within a DAW, the dry audio was already re-
corded – so it already contains the direct signal component (along with all the
other components) that was captured by the microphone originally used. This
distinction is fundamental to the Re-Mic process.
Re-Mic Re-Mic mode is a tool for “replacing” the original dry audio signal.
Processing
When Ocean Way Studios is in Re-Mic mode, the original dry signal is not
mixed back in with the wet processed signal. Instead, the dry signal is pro-
cessed to sound as if it were recorded inside the studio space itself, by emu-
lating the direct signal component. This processed source signal thus inherits
the sonic characteristics of the studio acoustics, source dispersion patterns,
and microphones with more accuracy and realism than is possible with re-
verb processing.
In the same way, with Ocean Way Studios, any track or bus can be routed
into the plug-in to “re-record” the original source so it inherits the sonic char-
acteristics of the Ocean Way studio acoustics, source dispersion patterns,
and microphones.
Reverb In artificial reverb processors, the direct signal component is not actually part
Processing of the processed signal. Instead, the original dry signal is simply mixed back
in with the reverb ambience (the wet signal). Although great results can be ob-
tained with this method, it is only an approximation of what really happens in
the physical realm.
When Ocean Way Studios is in Reverb mode, the plug-in behaves like most
artificial reverb processors. The direct signal component is not in the pro-
cessed signal. Instead, the original dry signal is mixed back in with the wet re-
verb ambience.
For additional details about Reverb and Re-Mic modes, see “Using Ocean
Way Studios” on page 329.
UAD Powered Plug-Ins Manual - 324 - Chapter 32: Ocean Way Studios
Microphones Overview
In addition to the studio room acoustics, the microphones used in the devel-
opment of Ocean Way Studios are a significant contributor to the tonality and
fidelity of the plug-in.
*Microphone names are all trademarks of their respective owners, which are in no way associated
or affiliated with Universal Audio or Ocean Way Recording. These microphone names, descriptions
and images are provided for the sole purpose of identifying the specific microphones studied during
Universal Audio’s sound model development and to describe certain microphone sound qualities
and performance characteristics. Ocean Way Studios is a trademark used under license by Ocean
Way Recording Inc.
UAD Powered Plug-Ins Manual - 325 - Chapter 32: Ocean Way Studios
Polar Patterns All microphone selections are denoted with O, C, or 8 after their name. Mi-
crophones with “O” after the name indicates the polar frequency response
pattern of the mic is omnidirectional. Microphones with “C” after the name in-
dicates the polar pattern of the mic is cardioid. Microphones with “8” after
the name indicates the mic has a “figure 8” polar pattern.
Independent Controls
Each microphone pair has its own set of controls that can be
independently adjusted. The individual microphone controls
are Selection, Distance, High Cut Filter, Low Cut Filter, Polar-
ity Invert, Mute, Balance, and Level. For details about how to
operate these controls, see “Mic Selection” on page 340.
Mic Positions The microphone placement positions within the studio rooms are specified by
Allen Sides based on his expertise of which microphone positions produce
great results for a given studio and source. Although these pre-defined micro-
phone positions cannot be moved from side-to-side, they can be moved closer
or farther with the Distance control.
UAD Powered Plug-Ins Manual - 326 - Chapter 32: Ocean Way Studios
Distance The distance from the microphone pair to
the source can be dynamically adjusted
using the Distance control. Just as when
recording with microphones in the physi-
cal realm, the mic-to-source distance can
have a significant impact on the sound
that is captured.
Stereo Separation
When Studio is set to OWR B and Source is set to Strings, Horns, or Vocal
Group, the 4006 and MKH20 selections for the Far microphone cannot be re-
positioned with the Distance control.
With the Far MKH20, this is a specialized setup whereby Mr. Sides chose to
set the microphones near the walls for the best sound. With the Far 4006, this
is because these mics are fixed installations in the studio loft (they cannot be
adjusted in the real studio either).
Distance Delay When recording a sound source with a microphone, there is an inherent de-
(Aligned) lay between the source and the microphone. This delay is the time it takes for
Overview
the sound waves to physically travel from the source to the mic (see Figure 99
on page 328). The farther the distance is from the source to the mic, the
longer the delay time.
UAD Powered Plug-Ins Manual - 327 - Chapter 32: Ocean Way Studios
Removing this inherent delay can be especially useful in these scenarios:
• If a source is recorded with a distant room mic, it will play back later in re-
lation to sources that are close-miced. Typically, this delay can be compen-
sated in the DAW by manually shifting the track forward in time so it aligns
with the other instruments. With Ocean Way Studios, removing the micro-
phone delay will align the distant mics automatically.
• When the microphone pair is distant from the source, the additional micro-
phone delay can be problematic for performers tracking in realtime while
monitoring through the plug-in. Setting the microphone pairs to aligned re-
duces realtime latency.
Tip: The most realistic acoustic emulations are recreated when the distance
delay is retained (aligned off). This is because the inherent source-to-mic de-
lays provide subtle yet important auditory cues that our brains use to interpret
the acoustic space.
Figure 99. Illustration of Distance Delay. When set to aligned, this “extra” time is eliminated.
Acoustic All rooms have frequency-dependent resonances that impact the loudness
Balancing and sonic balances within the room. Furthermore, microphone selections and
their placement within the room, as well as the audio source itself, all impact
the relative levels and timbres that are captured in a recording.
Although the studios at Ocean Way are beautifully designed and tuned, they
are naturally subject to the same acoustic principles. Because the plug-in ac-
curately models the ingredient interdependencies, certain combinations of
studios, sources, mic selections, and mic placements may cause the level bal-
ances to seem too quiet or too loud, or the balance may not be perfectly cen-
tered. Microphone Gain and Balance controls are provided to compensate
for these imbalances, providing ample practical and creative flexibility to
achieve the desired results.
UAD Powered Plug-Ins Manual - 328 - Chapter 32: Ocean Way Studios
Using Ocean Way Studios
For details about how to operate the specific controls, see “Ocean Way Stu-
dios Controls” beginning on page 335.
Best On Dry Ocean Way Studios does not remove already-recorded ambience from exist-
Sources ing audio signals. For optimum ambience control when using the plug-in, the
source audio should be as dry as possible. However, Ocean Way Studios is
very forgiving, and great results can be obtained even if the original source
has existing ambience.
Tip: Using ambience reduction tools prior to processing with Ocean Way
Studios can yield improved results with particularly ambient audio.
Which Mode? When to use Reverb mode
Use Reverb mode to add Ocean Way Studios ambience to existing sources
just as you would with other reverb processors and methodologies. See “Re-
verb Processing” on page 324 for an overview of Reverb mode.
Tip: This configuration conserves UAD DSP resources when the same effect
settings are desired for multiple channels (instead of using the plug-in on indi-
vidual channels).
Figure 100. DAW signal routing in Reverb mode using a traditional effect send/return configuration.
UAD Powered Plug-Ins Manual - 329 - Chapter 32: Ocean Way Studios
When to use Re-Mic Mode
Use Re-Mic mode to “replace” existing audio with new audio that inherits the
sonic characteristics of Ocean Way Studios. The original dry signal compo-
nent is removed and completely immersed with Ocean Way room sound. See
“Re-Mic Processing” on page 324 for an overview of Re-Mic mode.
Figure 101 shows how to configure the Re-mic workflow in a DAW. In this ex-
ample, all the drums are routed to a submix bus instead of the main outputs.
Ocean Way Studios is inserted on the submix bus return, and the plug-in is in
Re-Mic mode. Note that the effect sends are not used in this configuration.
In Re-Mic mode, the Dry/Wet (mix) control is automatically fixed at 100% wet
so the original dry signal does not stack or “phase” against the modeled di-
rect component signal. Instead of an effect bus return (or mix control), the de-
sired ambience is adjusted with the studio, source, and microphone selec-
tions, along with microphone placements and their relative levels.
Note: Because Re-Mic mode includes the direct signal path component in ad-
dition to the reverb components, the plug-in output is inherently louder in
Re-Mic mode.
Figure 101. DAW signal routing with OWS in Re-Mic mode on a drum submix
UAD Powered Plug-Ins Manual - 330 - Chapter 32: Ocean Way Studios
Dual-Mode Example
Figure 102 shows how to use both Re-Mic and Reverb modes with two in-
stances of the plug-in, combining the workflows of the two previous examples.
The illustration combines a drum submix is being used for Re-Mic mode, while
send/return routing is being used for guitar and vocals in Reverb mode.
Figure 102. DAW signal routing in a workflow with two Ocean Way Studios plug-in instances. One
uses Re-Mic mode for the drum submix, and the other uses Reverb mode for the guitar and vocals.
Phase When recording in the physical world, it is possible for phase issues to man-
Considerations ifest when more than one microphone is used on a source. The sonic charac-
teristic of “phasing” (more accurately called comb filtering) results when fre-
quencies that are being captured by more than one microphone are
emphasized because they are summed (signals in phase) or de-emphasized
because they are canceled (signals out of phase).
Phase issues resulting from the use of multiple microphones can usually be di-
minished by simply adjusting the placement position(s) of the microphone(s),
or switching its signal polarity.
UAD Powered Plug-Ins Manual - 331 - Chapter 32: Ocean Way Studios
Whenever more than one microphone pair is simultaneously enabled, careful
attention should be paid to the Distance (position) and Polarity Invert param-
eters to avoid potential phase issues. Just as with moving microphones around
and changing signal polarity when recording acoustically, changes to Dis-
tance and Polarity Invert can have a dramatic effect on the sound. Note that
sometimes phasing can sound just fine, and can be useful for creative pur-
poses.
Ocean Way Studios sounds amazing when set properly. If using more than
one microphone and the plug-in doesn’t seem to sound right, adjust the Dis-
tance and/or Polarity parameters on one (or more) of the microphones to
taste until phasing is minimized.
Because Re-Mic mode includes the direct signal component, if the original dry
signal is mixed with the processed signal when Ocean Way Studios is in
Re-Mic mode, phasing is likely to occur in this configuration (for example, if
the plug-in is in Re-Mic mode when used in a traditional effects bus send/re-
turn configuration). For illustrations of proper DAW routing in Re-Mic mode,
see Figure 101 on page 330 and Figure 102 on page 331.
Important: For the intended design results and to minimize phasing when
Ocean Way Studios is in Re-Mic mode, exercise caution to ensure the origi-
nal dry signal is not mixed with Ocean Way Studio’s processed output.
Latency Ocean Way Studios is not an upsampled plug-in. However, due to its unique
design requirements, Ocean Way Studios is subject to increased latency ver-
sus other UAD plug-ins.
Note: Latency can be reduced further with “Distance Delay” on page 340.
UAD Powered Plug-Ins Manual - 332 - Chapter 32: Ocean Way Studios
The latency of Ocean Way Studios depends on the sample rate. The exact la-
tency values are provided in Table 25.
Note: As with all UAD plug-ins, the latency of Ocean Way Studios is auto-
matically compensated by the DAW. See “Upsampled Plug-Ins” on page 550
for more information.
Load Time When certain Ocean Way Studios controls are modified (items in the two
left-most columns in Table 26 on page 334), the impulse response engine is
updated and/or microphone recalculations are performed by the plug-in.
These IR updates and recalculations are not instantaneous; there is a time lag
before the new control values are heard. Additionally, sonic artifacts and/or
host CPU increases can occur while these recalculations are performed if au-
dio is currently being processed by the plug-in.
Because there are extensive interdependencies within the plug-in, the specific
load time depends on the control(s) being modified. The “Load Progress LED”
on page 339 is a status indicator that flashes during the reload.
Automation Limitations
The load time can be an impediment if the specific controls are modified with
automation during a mix.
UAD Powered Plug-Ins Manual - 333 - Chapter 32: Ocean Way Studios
Table 26. Parameter Automation Recommendations
Automation Automation Continuous
Not Recommended May Cause Zippering Automation
Artifacts* OK
Studio: Select Microphone: Distance Mode (Re-Mic/Reverb)
Source: Select Microphone: Delay Master: EQ Low Frequency
Microphone: Select Microphone: High Cut Master: EQ Low Gain
Microphone: Low Cut Master: EQ High Frequency
Microphone: Polarity Master: EQ high Gain
Microphone: Mute Master: L/R Swap
Microphone: Gain Master: Mono Sum
Microphone: Gain Master: Wet Solo
Master: Predelay Master: Dry/Wet Mix
Master: Output Level
Master: Bypass
*Snapshot (static) automation between audio passages is recommended if automation is used
UAD Powered Plug-Ins Manual - 334 - Chapter 32: Ocean Way Studios
Ocean Way Studios Controls
Mode Ocean Way Studios offers two modes of operation: Re-Mic and Reverb. Click
a mode control to activate the mode. The button of the current mode is illumi-
nated.
For details about the differences between these two modes, see “Modes Over-
view” on page 323.
Re-Mic
In Re-Mic mode, the dry signal path is eliminated and the audio is processed
as if it was recorded inside Ocean Way Recording.
Important: For the intended design results and to minimize phasing when
Ocean Way Studios is in Re-Mic mode, exercise caution to ensure the origi-
nal dry signal is not mixed with Ocean Way Studio’s processed output.
Reverb
In Reverb mode, the plug-in behaves like most reverb plug-ins; the modeled di-
rect signal component is not included. Due to inherent nature of the Ocean
Way Studios design, changes to the microphone Distance and Gain settings
are less audible in Reverb mode than Re-Mic mode.
Studio Ocean Way Studios contains meticulous models of rooms A and B at Ocean
Way Recording. Each room (Figure 97 below) has unique sonic characteris-
tics.
Figure 103. Interior photos of Room A (left) and Room B (right) at Ocean Way Recording
UAD Powered Plug-Ins Manual - 335 - Chapter 32: Ocean Way Studios
OWR A
Ocean Way Recording A is Ocean Way's most spacious studio (45’ x 52’),
suitable for four-piece bands to full orchestras. With a rich sound, exception-
ally clear low end, and super smooth decay, OWR A is a study in classic stu-
dio design. Associated artists include John Mayer and Whitney Houston, to
classics like Frank Sinatra and Count Basie.
OWR B
Studio Menu
Tip: To change the studio room without altering the current microphone se-
lections, press Shift on the computer keyboard while changing the studio se-
lection.
Studio Defaults
When the studio is changed, the default settings for mic selections and dis-
tances are loaded for the near, mid, and far microphones. This menu does not
change the mic filter, polarity, mute, balance, or level settings.
UAD Powered Plug-Ins Manual - 336 - Chapter 32: Ocean Way Studios
Source A variety of audio sources (dispersion patterns) were
modeled for Ocean Way Studios. The Source menu sets
the optimum placement of the source within the room, as
determined by the expertise of Allen Sides.
Source Menu
To change the active source, click the current source name then select the de-
sired source from the drop menu. The current source is displayed in the menu
and as an icon in the Position display panel.
The modeled sources (dispersion patterns) that are available in Ocean Way
Studios are shown at right. “Cab” is short for electric guitar amplifier speaker
cabinet. The letter is a brand name indicator.
When the source is changed, the default source settings for mic selections and
distances are loaded for the Near, Mid, and Far microphones. This menu
does not change the microphone’s Filter, Polarity, Mute, Balance, or Level set-
tings.
UAD Powered Plug-Ins Manual - 337 - Chapter 32: Ocean Way Studios
Display Panels
The Display Panels show helpful information about the current state of the
plug-in. The four available panels are shown in Figure 104. Click the buttons
beneath the Display Panels to choose one. The button of the currently active
panel is illuminated.
Note: The Display Panels are for informational purposes only. There are no
parameter controls within any of the Display Panels, and the Panel selection
controls cannot be automated.
Position The Position panel shows an overhead representation of the current studio
room. The relative positions of the source and active microphone(s) are dis-
played within the room.
UAD Powered Plug-Ins Manual - 338 - Chapter 32: Ocean Way Studios
The locations of the source and microphones within the room are determined
by the Source and Distance parameters.
Note: Microphones that are muted are not shown in the Position Display
Panel.
Master EQ The Master EQ panel displays the state of the Master EQ settings. When the
Master EQ is disabled (or when both Master EQ Gain values are zero), the
frequency spectrum is flat.
Interior The Interior panel displays a photograph of the currently selected studio. This
panel is a helpful static background when visual feedback is undesirable.
Information This panel displays information about the currently selected studio and micro-
phone(s). General information is displayed initially; when the studio or micro-
phones are changed, text in the panel is updated with information about the
selection.
Note that studio and source changes take longer than microphone changes,
because these changes update all three microphone pairs, while microphone
changes update only one microphone pair.
Microphones
The Near, Mid, and Far microphone pairs each have their own set of con-
trols. The control set for each mic is identical. See “Microphones Overview”
on page 325 for related information.
UAD Powered Plug-Ins Manual - 339 - Chapter 32: Ocean Way Studios
Mic Selection The microphones used in the room are selected with this
menu. To change the active microphone, click the current mi-
crophone name then select the desired mic from the drop
menu, or click the microphone image to cycle through the
available microphones.
Not all microphones are available for all sources. For a list
of available microphones and their descriptions, see Table 24 on page 325.
Distance Distance varies the length between the microphone pair and the
source. The available ranges and default values for Distance de-
pend on the Studio and Source settings. Some microphones have
fixed positions. See “Fixed Distance Microphones” on page 327
for details.
Note: The colored rings around the encoders match the color of the micro-
phone pair icons in the Position display panel for visual feedback.
Tip: To return to the default value for the current microphone pair, click the
DISTANCE text label.
Note: Because these knobs are continuous “encoders” (they don’t have end
stops), mouse control is always linear even if controls mode is set to circular
or relative circular.
Distance Delay When a Distance encoder is clicked, the colored ring around the
encoder changes to black and “aligned” is displayed as the
value. When microphone pairs are aligned, the sonic character
of their placement in the room is maintained, but the time delay
between the source and the microphone that occurs in the physi-
cal realm is eliminated. Click the encoder a second time to return
to normal Distance mode.
For additional details about this feature, see “Distance Delay (Aligned) Over-
view” on page 327. For related information, see “Latency” on page 332.
UAD Powered Plug-Ins Manual - 340 - Chapter 32: Ocean Way Studios
Cut Filters Independent High Cut and Low Cut filters can be enabled on each mi-
crophone. Click the switch to toggle the filter state. The filter is active
when the switch is illuminated. The cutoff frequency and filter slope
varies for each of the microphones, as shown in Table 27 below.
Polarity Invert This switch inverts the polarity (“phase”) of the microphone. The signal
polarity is inverted when the switch is illuminated.
Polarity is especially useful when more than one microphone pair is enabled.
See “Phase Considerations” on page 331 for related information.
Mute Mute turns off the microphone pair so it is no longer heard. Click the
switch to toggle the mute state. When mute is active, the switch is illu-
minated, and the mic placement indicators are hidden from the Posi-
tion Display.
Tip: To quickly solo any microphone pair, shift-click any Mute switch. When
a Mute switch is shift-clicked, that mic is un-muted and the other mics are
muted.
Balance Balance sets the position in the stereo panorama. When the plug-in
is used in a mono-in/mono-out configuration, this control is locked
in the center position.
UAD Powered Plug-Ins Manual - 341 - Chapter 32: Ocean Way Studios
Gain This fader controls the volume level of the microphone. Gain has
a logarithmic taper for a more musical response. The gain range
is off to +12 dB. Gain is at unity when set to the zero position.
Master Controls
Predelay The amount of time between the dry signal and the onset of the
reverb is controlled with this knob. The range is from 0 to 125
milliseconds.
Bypass Bypass disables the plug-in. The button glows red when Ocean Way
Studios is disabled. Bypass can be used to compare the processed
and original signals.
Note: The UAD DSP load is not reduced when bypassed with this switch. To
reduce UAD DSP usage when bypassed, use the host’s bypass switch instead.
L/R Swap This switch reverses the left and right channels at the output of the
plug-in. L/R Swap is useful for changing the listener perspective from
the audience position to the performer position. When the switch is not
illuminated (the default), output is from the audience position.
UAD Powered Plug-Ins Manual - 342 - Chapter 32: Ocean Way Studios
Mono Output
Stereo Output
Dry/Wet When the plug-in is used in Reverb mode in a track insert (versus
effect send/return) configuration, Dry/Wet determines the bal-
ance between the original dry signal and the processed signal.
The range is from 0% (dry, unprocessed) to 100% (wet, pro-
cessed signal only).
Dry/Wet is used to set the amount of ambience when the plug-in is used in a
track insert (versus aux send/return) configuration.
Wet Solo Wet Solo puts Ocean Way Studios into 100% wet mode. When Wet
Solo is on, it is the equivalent of setting the Dry/Wet knob value to
100%.
UAD Powered Plug-Ins Manual - 343 - Chapter 32: Ocean Way Studios
Wet Solo defaults to On, which is optimal when using Ocean Way Studios in
Reverb mode in the “traditional” reverb configuration (placed on an effect
group/bus that is configured for use with channel sends). When Ocean Way
Studios is used on a channel insert in Reverb mode, this control should be de-
activated so the Dry/Wet mix can be adjusted.
Wet Solo is fixed in the enabled position in Re-Mic mode so the original dry
signal cannot be mixed with the modeled direct signal component within the
plug-in.
This control uses a logarithmic taper to provide increased resolution when se-
lecting lower values. When the knob is in the 12 o’clock position, the value
is approximately 15%.
Master Level This fader controls the volume level at the output of the plug-in.
It has a logarithmic taper for a more musical response. The gain
range is from off to +12 dB. Gain is at unity when set to the zero
position.
UAD Powered Plug-Ins Manual - 344 - Chapter 32: Ocean Way Studios
Master EQ
This group of parameters contains the controls for Ocean Way Studio’s mas-
ter equalizer. It is a two band (low and high) shelving EQ that uses ana-
log-sounding algorithms for great tonal shaping options. The slope of both fil-
ters is 12 dB per octave.
Tip: To quickly return to the 0 dB position for either of the Master EQ Gain
controls, click the GAIN text label above the knob.
Master EQ The Master EQ is enabled with this switch. The equalizer is active when the
In/Out button is illuminated.
Low Shelf This parameter specifies the low shelving band transition frequency to be
Frequency boosted or attenuated by the low shelf Gain setting. The range is from 20 Hz
to 2 kHz.
Because this is a shelving EQ, all frequencies below this setting will be ef-
fected by the low shelf Gain value.
Low Shelf Gain This parameter determines the amount by which the transition frequency set-
ting for the low band is boosted or attenuated. The available range is ±12 dB.
High Shelf This parameter determines the high shelving band transition frequency to be
Frequency boosted or attenuated by the high shelf Gain setting. The range is from 200
Hz to 20 kHz.
Because this is a shelving EQ, all frequencies above this setting will be af-
fected by the high shelf Gain value.
High Shelf Gain This parameter determines the amount by which the frequency setting for the
high band is boosted or attenuated. The available range is ±12 dB.
UAD Powered Plug-Ins Manual - 345 - Chapter 32: Ocean Way Studios
The History of Ocean Way Recording
In 1972, Allen Sides began building custom loudspeakers and leased a ga-
rage in Santa Monica, California as a hi-fi demo room. This garage was
within steps of the Pacific Ocean and was situated on a street appropriately
named - Ocean Way. Since he knew exactly what kinds of sounds were most
impressive on his speakers, Sides did limited live to two-track recordings as
demo material. During these demos, listeners became as interested in the re-
cordings as the speakers and before long, they were asking Allen to make
their recordings. In order to service those clients, Ocean Way Recording was
born. Five Grammys and a thousand albums later Allen is still rolling.
UAD Powered Plug-Ins Manual - 346 - Chapter 32: Ocean Way Studios
Putnam moves In order to be a proper studio, Sides needed a recording console. This is
to Los Angeles where the story of Ocean Way truly begins; How Sides ended up purchasing
Western Recorders' original tube console and came face to face with M.T.
“Bill” Putnam. Putnam was a true renaissance man in the world of sound and
music. His combined skills as a record producer, audio engineer, songwriter,
singer, electrical engineer, inventor, studio owner and businessman are un-
paralleled to this day. Putnam owned and operated the largest independent
recording facility in the country, Universal Recording in Chicago. But with a
large chunk of his business moving west, clients like Frank Sinatra and Bing
Crosby urged him to open a Los Angeles facility. Finally in 1957, Bill moved
to 6050 Sunset Blvd. in Hollywood and started constructing brand new stu-
dios for his newly named studio enterprise, United Recording Corporation.
The ultimate result was in 1961, when he purchased the neighboring West-
ern Studio at 6000 Sunset, creating the United/Western Recorders studio
complex.
Get This Stuff So how was it that Allen Sides and Bill Putnam come together at this key mo-
Out of Here ment? Sides explains, “I needed a console. I heard that Bill's factory manager
Ray Combs needed to clear some space-much of it occupied by all the old
tube equipment from United/Western Studios”. Allen was a runner at
United/Western in the late 60's and knew everyone, but had never met Bill.
“I knew Bill was out of town, so I went to Ray and said, ‘How about I give you
$6,000 for all this junk including the trailer in the back with the old Western
console in it.’ He said, ‘I'll take it; get this stuff out of here.’”
UAD Powered Plug-Ins Manual - 347 - Chapter 32: Ocean Way Studios
“One man's junk is another man's treasure; and in this case, I was able to ac-
quire some old Fairchild limiters, UA tube limiters, Macintosh tube amps, and
enough equipment to completely fill my garage studio. It was the deal that re-
ally put me in business. However, there was a slight problem. I didn't actually
have the 6 grand, so I wrote a check, picked up the stuff, and within six hours
had sold enough gear to cover my check.” When Putnam returned and found
that his manager had been snookered into selling all this equipment for
$6,000, he wanted to meet him. As Sides explains, “There was no way to
ever anticipate what would take place. When I walked into Bill's office, he
gave me a long, stern look. That look eventually turned into a smile, and he
proceeded to offer me a partnership which involved buying out studios all
over the United States. Bill and I just clicked immediately and we became very
good friends and business partners in the following years.”
By 1976, things were going well at the Ocean Way garage, with sessions
around the clock. Bill was a frequent guest and loved listening to the tri-am-
plified front loaded theater horns in Allen's control room. Unfortunately, trying
to keep a low profile while running a commercial studio in a quiet residential
neighborhood proved to be much more tricky.
Early sessions ranged from Neil Diamond, Chick Corea, Bette Midler, and all
the way to Frank Zappa. In 1982 towards the end of his career, Bill also
leased Studio A to Allen. Sides made a few control room changes, and Studio
A immediately became one of the most popular rooms in town again. One of
the first projects was Lionel Ritchie's “Can't Slow Down,” which sold 25 mil-
lion records and Michael Jackson's Thriller. Lionel and Michael became two
UAD Powered Plug-Ins Manual - 348 - Chapter 32: Ocean Way Studios
of Allen's best long term clients. A couple years later, Bill sold United/West-
ern to Allen, at which time United Recorders then became Ocean Way Re-
cording. It was also during this time Sides began buying close to a thousand
tube microphones from overseas: The European studios and broadcasters
were dumping loads of “antiquated” tube mics for brand new phantom-pow-
ered transistor mics. He carefully went through every mic, picking the abso-
lutely best of the best and selling off the rest. This is how, along with mics from
previous studio buyouts with Putnam, Ocean Way amassed one of the largest
collection of tube mics in the world.
UAD Powered Plug-Ins Manual - 349 - Chapter 32: Ocean Way Studios
UAD Powered Plug-Ins Manual - 350 - Chapter 32: Ocean Way Studios
CHAPTER 33
Overview
The Precision Buss Compressor is a dual-VCA-type dynamic processor that
yields modern, transparent gain reduction characteristics. It is specifically
designed to “glue” mix elements together for that cohesive and polished
sound typical of master section console compressors. A flexible and intuitive
tool, the Precision Buss Compressor is intended primarily for controlling the
final output of your mix, but can be usefully applied to a variety of sources
from drum busses or overheads to vocal groups, or even as a channel
compressor on individual track inserts.
The Precision Buss Compressor’s control set features Threshold, Ratio, Attack
and Release, with all parameters specifically tailored to buss compressor
usage. The Release control includes a multi-stage Auto Release also designed
for a wide variety of program material. Input and Output Gain control is
offered with metering for input, output and gain reduction. A high pass Filter
is offered for the internal control signal sidechain to reduce the sensitivity of
the compression to lower frequencies while retaining them in the output sig-
nal. An automatic Fade feature is included, which allows the user to set a cus-
tom fade-out or fade-in of the mix between 1 and 60 seconds long. Rounding
out the feature set is a Mix control that allows the user to achieve “parallel”
style dynamics control, without the need for a second buss or channel.
UAD Powered Plug-Ins Manual - 351 - Chapter 33: Precision Buss Compressor
Precision Buss Compressor Screenshot
Filter Filter regulates the cutoff frequency of the filter on the compres-
sor's control signal sidechain. Removing low-frequency content
from the sidechain can reduce excessive gain reduction
and/or “pumping” on bass-heavy audio signals without reduc-
ing bass content of the audio signal itself.
Note: The Filter parameter affects the control signal (sidechain) of the com-
pressor only. It does not filter the audio signal.
Threshold This parameter determines the threshold level for the onset of
compression. Incoming signals that exceed this level are com-
pressed. Signals below the level are unaffected.
UAD Powered Plug-Ins Manual - 352 - Chapter 33: Precision Buss Compressor
When Ratio is changed, the Threshold value is updated accordingly:
When Ratio is set to 4:1, the Threshold range is –45 dB to +10 dB.
When Ratio is set to 10:1, the Threshold range is –40 dB to +15 dB.
Note: When Ratio is changed, Threshold numerical values are updated but
the Threshold knob position does not move.
Ratio Ratio determines the amount of gain reduction for the compres-
sor. For example, a 2:1 ratio reduces the signal above the
threshold by half, with an input signal of 20 dB being reduced
to 10 dB.
The available Ratio values are 2:1 (default), 4:1, and 10:1.
Attack Attack sets the amount of time that must elapse once the input
signal reaches the Threshold level before compression is ap-
plied. The faster the Attack, the more rapidly compression is
applied to signals above the threshold.
The Auto release characteristic for Precision Buss Compressor has a unique
quality that is optimized for program material.
UAD Powered Plug-Ins Manual - 353 - Chapter 33: Precision Buss Compressor
Slower release times can smooth the transition that occurs when the signal
dips below the threshold, especially useful for material with frequent peaks.
However, if you set too large of a Release time, compression for sections of
audio with loud signals may extend to lengthy sections of audio with lower
signals.
Fade The Precision Buss Compressor provides a Fade function that, upon activa-
tion, automatically reduces the plug-in output to minimum within a specified
time period. This function enables extremely smooth-sounding fade outs (and
fade ins), plus it can be automated as well. The Fade function processes the
signal at the output of the compressor.
Fade Set
Fade Set determines the amount of time that will pass between
the Fade button being activated and the plug-in output level be-
ing reduced to minimum (or being raised to 0 dB in the case of
a fade in). The available range is from 1.0 second to 60 sec-
onds.
Fade times immediately reflect the current Fade Set value. Therefore a fade
out that has already been initiated can be accelerated by changing Fade Set
during the fade out. Conversely, a fade in can be accelerated by changing
Fade Set during the fade in.
Note that although the Fade Set control itself has linear taper, the fade signal
level that is output has an exponential curve.
Fade Switch
Activating the Fade switch initiates a fade out. The fade out time is
determined by the Fade Set parameter.
The Fade switch flashes red when a fade out is in progress, and
glows solid red when the fade out is complete (when the Fade Set
time has elapsed).
Deactivating Fade initiates a fade in. During a fade in, the signal
level is increased from the current level of attenuation to 0 dB of at-
tenuation. The Fade switch flashes blue when a fade in is in
progress, and is no longer illuminated when the fade in is complete (when the
Fade Set time has elapsed).
UAD Powered Plug-Ins Manual - 354 - Chapter 33: Precision Buss Compressor
Toggling the Fade switch causes an already active fade to reverse direction,
without a jump in output level. The Fade Set rate is constant even if an active
fade is interrupted. For example: If the Fade Set value is 30 seconds and a
fade out is initiated, then Fade is clicked again after 20 seconds, it will take
20 seconds to fade back in.
Note: Shift+click the Fade button to instantly return the level back to 0 dB (this
feature cannot be automated).
Input Level Input controls the signal level that is input to the plug-in. Increas-
ing the input may result in more compression, depending on
the values of the Threshold and Ratio parameters.
Mix The Mix control determines the balance between the original
and the processed signal. The range is from 0% (dry unproc-
essed signal only) to 100% (wet processed signal only). The
default value is 100%.
Output Level Output controls the signal level that is output from the plug-in.
The default value is 0 dB. The available range is ±20 dB.
Generally speaking, adjust the Output control after the desired amount of
compression is achieved with the Threshold and Ratio controls. Output does
not affect the amount of compression.
The range is from –30 dB to 0 dB. Signal peaks are held for 3 seconds before
resetting.
UAD Powered Plug-Ins Manual - 355 - Chapter 33: Precision Buss Compressor
Gain Reduction The Gain Reduction meter dis-
Meter plays the amount of gain re-
duction occurring within the
compressor.
More blue bars moving to the left indicate more gain reduction is occurring.
The meter range is from –16 dB to 0 dB. Signal peaks are held for 3 seconds
before resetting.
UAD Powered Plug-Ins Manual - 356 - Chapter 33: Precision Buss Compressor
CHAPTER 34
Precision De-Esser
Overview
The Precision De-Esser seamlessly and accurately removes sibilance from in-
dividual audio tracks or even composite mixes via its intuitive interface and
sophisticated yet transparent filter processing.
The Threshold knob dials in the amount of sibilance reduction, while the two-
position “Speed” button gives control over the envelope (attack and release)
of the detector. The Frequency knob sweeps a continuous target frequency
range from 2-16 kHz, allowing repairs on a large range of voices (or even
overheads and hi-hats), while the Solo button allows the user to isolate and
monitor the target sibilant frequencies. The Width control offers a variable
1/6 to 1 2/3 octave bandpass filter that is perfect for complex program ma-
terial, adapting technology from the TEC-nominated Precision Multiband. The
Width control also switches into a more traditional highpass filter more com-
monly employed when tailoring individual voices. For even greater transpar-
ency, the Split feature gives the user the option to compress only the sibilant
range, or may be turned off to compress the entire spectrum for more tradi-
tional de-essing.
Click the Speed button to change the mode. Alternately, you can click+hold
the LED area and drag like a slider to change the value.
Solo The Solo button isolates the de-essing sidechain (the signal defined by
Frequency and Width). Solo makes it easier to hear the problem fre-
quencies to be attenuated.
Click the button to active Solo mode. The button is red when Solo is active.
When Width is rotated fully clockwise, High Pass mode is activated. In High
Pass mode, Frequency (“Frequency” on page 358) defines the cutoff fre-
quency of the high pass filter (instead of the center frequency of the bandpass
filter). High Pass mode is useful when you want to attenuate all frequencies
above the cutoff frequency.
The available range is 0.15 (about 1/6 octave) to 1.61 (about 1 2/3 oc-
taves), plus High Pass mode.
Note: UAD DSP usage is slightly decreased when Precision De-Esser is in High
Pass mode versus bandpass mode (unless UAD-2 DSP LoadLock is enabled).
In normal use Split should be enabled, causing only the “ess” spectrum as de-
fined by Frequency and Width (i.e., the sidechain), to be attenuated. This pro-
vides the most precise de-essing control.
Split can be disabled, which causes the entire input signal to be attenuated
(instead of just the “ess” sidechain) which results in more traditional compres-
sion. However, the sidechain still controls attenuation when Split is off.
Click the Split button to change the mode. Alternately, you can click+hold the
LED area and drag like a slider to change the value.
Power The Power switch determines whether the plug-in is active. This
is useful for comparing the processed settings to the original
signal or bypassing the plug-in to reduce the UAD DSP load
(load is not reduced if UAD-2 DSP LoadLock is enabled).
Toggle the switch to change the Power state; the UA logo is illuminated in blue
when the plug-in is active.
You can click-hold the power switch then drag it like a slider to quickly
Note:
compare the enabled/disabled state.
Operating Tips
• For taming sibilance for a full mix/mastering, best results will usually be ob-
tained by enabling Highpass and Split modes.
• Generally, female “ess” and “shh” sounds vary more in frequency than
those of males. Due to this situation, you may find that using the sidechain
filter in Highpass mode (or Bandpass mode with a large width) may be
more responsive.
• Over de-essing can degrade the natural sound of a vocal.
Precision Enhancer Hz
Overview
The Precision Enhancer Hz allows the user to selectively add upper harmonics
to bass fundamentals, sometimes referred to as “phantom bass.” This signifi-
cantly enhances the perception of low-end energy beyond the conventional
frequency response of small speakers. These harmonics stimulate a psychoa-
coustic bass-enhancing effect in the listener, giving even the smallest speakers
greater translation of low frequency sources. Universal Audio’s unique ap-
proach to this common problem combines a simple control set that yields ex-
acting results with minimal adjustment and allows the widest range of tonality
available in its class, from subtle to decidedly audible.
The Hz Frequency control sets the corner frequency of the bass-isolation low
pass filter, while Effect blends the generated signal into the original signal.
Four effect slopes are available for variations in harmonic density, while five
modes present various internal control configurations to support the widest ar-
ray of source material. Finally, the Precision Enhancer Hz includes control
over the final output with metering to compensate for gain changes created
by the effect.
Precision Enhancer Hz does for low frequencies what Precision Enhancer kHz
does for the highs. Together, they are a great complementary pair.
Note: The signal level at the plug-in input will interact with the Effect control.
Effect Meter The Effect Meter indicates the amount of signal processing that is occurring.
More illuminated blue segments indicate more signal enhancement.
Effect Solo Effect Solo isolates the generated signal and is affected by Effect level.
Effect Solo is active when the button is red.
The Effect Solo signal is “pure” and contains no added original or fil-
tered bass signal. Therefore the soloed signal may not sound “pleasant” when
heard by itself. When Effect Solo is used in conjunction with “Hz Solo” on
page 364, the complete “mixed” effect is heard.
Mode The five Modes (A, B, C, D, and “All”) optimize the plug-in
internally to support the widest array of source material.
The Mode control determines the type of enhancement that
will be applied to the signal.
Tip: The active Mode can be selected by clicking the Mode button repeatedly
to rotate through the Modes, or by clicking each Mode letter or LED.
Mode A (Bass 1)
Mode A is tuned for both acoustic and electric bass instruments. Adds low fre-
quency emphasis when set to low frequency value, mid to high frequencies
aid in phantom bass generation for smaller sound systems.
Mode B is primarily for electric and DI bass with balanced mid range
harmonics to help the bass stick out of the mix.
Mode C (Synth)
Mode C is tuned specifically for synth bass and other full-range material. It
produces a wider range of harmonics than the Bass modes A and B. Mode C
also works well on sub-mixes and program material. Moderate compression
is applied to the harmonics signal, increasing the amplitude of the harmonics
and altering their timbre.
Mode D (Kick)
Mode D has a short decay, which makes this setting ideal for kick drum
sounds and other percussive instruments. Moderate compression is applied to
the harmonics signal, increasing the amplitude of the harmonics and altering
their timbre.
All Mode
Slope Slope changes the shape of the high pass filter that is ap-
plied to the effect signal. The high pass filter helps eliminate
rumble/muddiness in the signal.
Slope can be set to 6, 12, 24, or 36 dB per octave. The active Slope can be
selected by clicking the Slope button repeatedly to rotate through the values,
or by clicking each Slope value or LED.
Note:When the Hz Frequency is set to a low value, Slope may have little or
no audible effect.
Hz Solo Hz Solo isolates the original bass signal and can be combined with Ef-
fect Solo. Hz Solo is active when the button is red.
Output Meter
The stereo Output Meter displays the signal level at the output of the plug-in.
When the plug-in is disabled with the plug-in Power switch (but not the host
plug-in enable switch), the output meters still function.
Power The Power switch determines whether the plug-in is active. This
is useful for comparing the processed settings to the original
signal or bypassing the plug-in to reduce the UAD DSP load
(load is not reduced if UAD-2 DSP LoadLock is enabled).
Toggle the switch or click the UA logo to change the Power state. The UA logo
is illuminated in blue when the plug-in is active.
You can click-hold the power switch then drag it like a slider to quickly
Note:
compare the enabled/disabled state.
Overview
The Precision Enhancer kHz is a sophisticated tool with a simple control set,
primarily designed to bring dull or poorly recorded tracks to life. However,
with five distinct Enhancement “Modes”, the Precision Enhancer kHz will find
uses on virtually any source. It can be used to minimally massage the middle
and upper frequencies of a mix, or drastically alter the presence or dynamics
of individual tracks or groups; Unlike other enhancers that function by fre-
quency delay or filtered clipping, the Precision Enhancer kHz works on spe-
cialized techniques of equalization and dynamic expansion that can be used
as a highly versatile effect.
The five Modes (A, B, C, D and the shift-clickable “All”) present various con-
trol configurations to support the widest array of source material. With Modes
A and B, the filtered audio is mixed in with the dry signal according to the Ef-
fect control. For Modes C, D and All, audio is passed through a unique up-
wards expander where the expanded audio is then filtered before being
mixed with the dry signal. For these modes, Effect is used as a fader on the
way into the expander. The release can be adjusted to either Fast or Slow via
the Speed button, giving a greater range of dynamic/frequency enhance-
ment. For Mode C, the sweepable filter applied to the expander's output is
identical to the filter used with Mode A. For Mode D and All, the expander's
output is passed to a set of filters in parallel. Finally, the Precision Enhancer
kHz includes control over the final Output level metering to compensate for
gain changes created by the effect.
UAD Powered Plug-Ins Manual - 366 - Chapter 36: Precision Enhancer kHz
Precision Enhancer kHz Screenshot
Note: The signal level at the plug-in input will interact with the Effect control.
Effect Meter The Effect Meter indicates the amount of signal processing that is occurring.
More illuminated blue segments indicate more signal enhancement.
Mode A
Mode B
Mode B is optimized for vocal range content. The kHz Frequency parameter
is disabled in this mode.
UAD Powered Plug-Ins Manual - 367 - Chapter 36: Precision Enhancer kHz
Mode C
Mode D
Mode D dynamically enhances both high and low frequency content. The en-
hancement amount is increased as the input signal level increases. The kHz
Frequency parameter is disabled in this mode.
All Mode
“All” mode is selected by shift+clicking Mode letters or LEDs. All Mode ex-
pands all frequencies of the input signal. The enhancement amount is in-
creased as the input signal level increases. The kHz Frequency parameter is
disabled in this mode.
Speed The Speed parameter defines the attack and release char-
acteristic of the enhancement process.
Fast
In Fast mode, the enhancement processor has a quick response time of 30ms,
which yields a more percussive “bite” and/or a more aggressive sound.
Slow
Slow mode has a slower response time of 180ms which can deliver a
smoother sound overall.
kHz Frequency The kHz Frequency parameter defines the cutoff fre-
quency for the enhancement process in Mode A and
Mode C. Frequencies above this value are enhanced
by the processor. The available range is 1.00 kHz to
10.0 kHz.
UAD Powered Plug-Ins Manual - 368 - Chapter 36: Precision Enhancer kHz
Generally speaking, adjust the Output control after the desired amount of pro-
cessing is achieved with the Effect and kHz Frequency controls. Output does
not affect the amount of enhancement processing, nor does it have any effect
when the plug-in is disabled.
Output Meter
The Output Meter displays the signal level at the output of the plug-in.
When the plug-in is disabled with the plug-in Power switch (but not the host
plug-in enable switch), the output meters still function.
Power The Power switch determines whether the plug-in is active. This
is useful for comparing the processed settings to the original
signal or bypassing the plug-in to reduce the UAD DSP load
(load is not reduced if UAD-2 DSP LoadLock is enabled).
Toggle the switch or click the UA logo to change the Power state; the UA logo
is illuminated in blue when the plug-in is active.
You can click-hold the power switch then drag it like a slider to quickly
Note:
compare the enabled/disabled state.
UAD Powered Plug-Ins Manual - 369 - Chapter 36: Precision Enhancer kHz
CHAPTER 37
Precision Equalizer
Overview
The Universal Audio Precision Equalizer™ is a stereo or dual-mono four band
EQ and high-pass filter designed primarily for mastering program material.
The Precision Equalizer may also be used in recording and mixing where the
utmost in EQ quality is required. The Precision Equalizer is based on industry
standard analog mastering filters, and uses the classic parametric controls ar-
rangement. The Precision Equalizer utilizes the best from those designs while
incorporating features convenient to digital mastering. To preserve the great-
est sonic detail and ensure a minimum of artifacts in the upper frequency
range, the Precision Equalizer is upsampled to 192 kHz.
The Precision Equalizer also features flexibility in auditioning. There are three
separate EQ configurations, allowing selection of two complete sets of stereo
parameters or the Dual mode when disparate channel adjustments are neces-
sary. In addition, parameter values can be easily transferred between param-
eter groups using the Copy buttons.
Control Grouping
The L and R equalizer sections are independent
groups of parameters, each controlling one side
(left or right) of the stereo source signal.
Modes
The Mode switches define the operating mode of Precision
Equalizer. The currently active mode is indicated by a blue
light. Each mode is detailed below.
Stereo Mode In Stereo mode, the L and R equalizer sections both control one side of the ste-
reo source signal. The L and R controls are linked in stereo mode.
In stereo mode there are two sets of EQ settings (referred to as A and B), with
each set containing the full set of L and R parameter values (the high-pass filter
value is global per preset). This feature enables easy switching between two
EQ settings for comparison purposes. Both the A and B parameter sets are
contained within a single Precision Equalizer preset.
Mode Selection
Any of the below methods may be used to modify the Mode value:
• Click the Stereo button to cycle through modes A and B
• Click the Dual button to activate dual-mono mode
• Click the indicator light above each mode
• Click+hold+drag the indicator light above each mode.
Parameter Copy The Parameter Copy buttons provide an easy method for copy-
Buttons ing parameter values. The behavior of the buttons is determined
by the current operating mode of Precision Equalizer.
Note: The values that existed at the destination before copying are lost.
Stereo Mode
When in Stereo mode (see “Stereo Mode” on page 371), clicking A > B cop-
ies the left AND right parameter values from parameter set A to parameter set
B, and clicking the A < B button copies all the values from parameter set B to
parameter set A.
This feature is useful when you want to make an EQ change to a stereo signal
while maintaining the original values so the two settings can be easily com-
pared.
Note: The high-pass filter parameter is global per preset and is not affected by
this control.
When in Dual mode, the A and B buttons behave as left and right channel
copy buttons. Clicking A > B copies all the values from the left channel pa-
rameters to the right channel parameters, and clicking A < B copies all the val-
ues from the right channel parameters to the left channel parameters.
Band Controls
Each control set (L and R) has four EQ bands. Two bands are overlapping low
frequency bands labeled L1 and L2, and two bands are overlapping high fre-
quency bands labeled H1 and H2.
Each of the four bands has a control for bandwidth, enable, frequency, and
gain. All four of the EQ bands can be used in parametric or shelf mode. The
controls are exactly the same for each band; only the available frequency val-
ues differ.
Bandwidth Knob The Bandwidth (Q) knob defines the proportion of frequencies surrounding
the band center frequency to be affected by the band gain control.
The numbers represent the filter slope in dB per octave. The available selec-
tions are 4, 6, 9, 14, 20, and Shelf.
When set to Shelf on the L1 and L2 bands, the band becomes a low shelving
filter. When set to Shelf on the H1 and H2 bands, the band becomes a high
shelving filter.
This knob is stepped with 41 values for easy reproducibility during mastering.
To double the resolution of the available knob values (for fine control), press
the shift key on the computer keyboard while adjusting the knob. This in-
creased 2x frequency resolution (within the available range) can also be
specified using text entry, parameter automation, or ‘controls’ mode. The
available values for each of the four bands is the same in both parametric and
shelf modes, and are listed in Table 28 below.
Note: Not all host applications support automation and/or controls mode.
Gain Knob The Gain knob determines the amount by which the frequency setting for the
band is boosted or attenuated. The available Gain values are listed in
Table 29 below.
High-Pass Filter The high-pass filter is useful for reducing low frequency
content. It is a global filter; it always affects both left and
right channels, regardless of the active mode. See
Table 30 below for available settings.
Note: Compensating for Precision Equalizer is not required if the host appli-
cation supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs.UAD-2 DSP LoadLock
UAD Powered Plug-Ins Manual - 376 - Chapter 38: Precision K-Stereo Ambience Recovery
Operational Overview
Ambience The primary function of Precision K-Stereo is for ambience recovery and en-
Recovery hancement. The plug-in doesn’t add new ambience or change the balance of
the mix. Instead, it extracts, recovers, polishes, and embellishes the ambience
that already exists in a source recording.
Precision K-Stereo does not use any comb filters, matrixing, phase processing,
or related techniques which are used in typical image processors. Instead, the
ambience recovery process is accomplished using established psychoacous-
tic principles. The result is a smooth, natural, phase-coherent, and mono-com-
patible sound that meets professional mastering standards.
Primary Precision K-Stereo is designed for use during the mastering process to fine-
Application tune the ambience that exists in previously-mixed stereo program material.
Generally speaking, adjusting ambience during multitrack mixdown is best
managed within the mix itself because of the higher level of control and detail
available at that stage.
Of course, Precision K-Stereo can be used across the stereo bus during mixing
and/or in other creative applications as well. However, since the process is
optimized for broad spectrum mixes with at least some ambient content, the
effect may be extremely subtle on individual tracks, depending on the ambi-
ent content in the recording.
Mid/Side The Precision K-Stereo processor does not use or require mid/side encoding
Leveling or decoding techniques to achieve ambience recovery nor enhancement.
However, the plug-in has an independent mid/side ratio leveling feature that
can be useful during mastering to compensate for overall center-to-side level
imbalances within the stereo field.
The ambience recovery feature can then be used to recover ambience and
space that is lost when the mid-channel level is increased (such as when rais-
ing a center-located vocal or instrument).
UAD Powered Plug-Ins Manual - 377 - Chapter 38: Precision K-Stereo Ambience Recovery
Configurations Precision K-Stereo is optimized for use in stereo-in/stereo-out configurations.
However, ambience recovery is possible on monophonic source recordings
when the plug-in is used in a mono-in/stereo-out configuration. Mono signals
are “stereo-ized” in the MISO context.
Note: Due to the inherent stereo nature of the ambience recovery process,
Precision K-Stereo is not intended for use in mono-in/mono-out configurations.
Presets Precision K-Stereo includes factory presets designed by Bob Katz. A list of
these presets and their application notes are at the end of this chapter.
Control Precision K-Stereo controls are grouped into four sections: Ambience Recov-
Arrangements ery, Ambience Filters (EQ), Mid/Side, and L/R Gain. The detailed control de-
scriptions are similarly grouped.
Control Switches
Adjustments
For the main switches (Recover, EQ, etc.), click the switch to toggle the setting.
The switch is engaged when it is illuminated.
Knobs
For the knob controls, values can be adjusted with the mouse or values can be
entered directly via text entry. Additionally, when the tickmarks and/or values
around the knob are clicked, the knob will jump to that setting. The “big
knobs” (Ambience Gain, Mid/Side Gain, and L/R Gain) can be returned to
the zero value by clicking the control label above the knobs.
UAD Powered Plug-Ins Manual - 378 - Chapter 38: Precision K-Stereo Ambience Recovery
Ambience Recovery
Refer to Figure 111 below for the controls in this section.
Recover Enable This switch enables/disables the ambience recovery process. See “Ambience
Recovery” on page 377 for an overview.
Note: This switch does not have any effect on the M/S Gain, L/R Gain, or
Power controls.
Ambience Gain The Ambience Gain knob controls the level of recovered ambience. The de-
fault 0 dB position is defined as the nominal or “typical” setting (ambience re-
covery is occurring when set to 0 dB).
Enhance The ambience recovery process can be manipulated further with the Deep
and Wide switches.
Note: The Enhance functions can only be enabled when the Recover switch
is engaged.
Deep
Provides deeper ambience recovery when the switch engaged.
Wide
Spreads and enhances the stereo image when the switch is engaged.
UAD Powered Plug-Ins Manual - 379 - Chapter 38: Precision K-Stereo Ambience Recovery
Ambience Filters
The Ambience Filters (EQ) provide for frequency adjustments to the ambient
portion of the signal. These controls do not affect the direct (dry) portion of the
signal.
The Ambience Filters consist of one Low Cut filter, one High Cut filter, and a
single-band parametric bell filter.
Note: Controls in the Ambience Filters section have no effect unless the Re-
cover Enable switch is engaged.
EQ Enable The EQ switch enables/disables the Ambience Filters. This switch can only be
engaged when the Recover Enable switch is engaged.
Cut Filters The Low Cut and High Cut filters have a slope of 12 dB per octave. Each Cut
Filter can be independently disabled by setting it to the OFF position (the de-
fault value).
Low Cut
High Cut
UAD Powered Plug-Ins Manual - 380 - Chapter 38: Precision K-Stereo Ambience Recovery
Bell Filter The bell filter is fully parametric, with independent control of frequency, gain,
Q (bandwidth), and gain.
Bell Frequency
This control sets the center frequency of the bell filter. The available range is
150 Hz to 10 kHz.
Bell Q
Bell Q determines the bandwidth of the bell filter. The available range is 0.5
to 3. Smaller Q values cause the bell filter to effect a broader portion of the
frequency spectrum, while high Q values affect a narrower spectrum.
Bell Gain
Bell Gain determines how much boost or cut is applied to the bell filter. The
available range is ±10 dB. To quickly return to the 0 dB setting, click the
GAIN text label.
Note: The two other Bell parameters (Frequency and Q) have no effect when
Bell Gain is set to 0 dB.
UAD Powered Plug-Ins Manual - 381 - Chapter 38: Precision K-Stereo Ambience Recovery
Mid/Side Controls
The Mid/Side controls allow for level adjustments to the middle (center) and
side portions of signals within a stereo field. Mid/Side adjustments can be
made when ambience recovery is active or disabled. Note that the ambience
recovery process does not use or require mid/side techniques to achieve am-
bience recovery or enhancement.
Note: The Mid/Side controls are disabled when the plug-in is used in a
mono-in/mono-out configuration.
M/S Gain This switch enables/disables the Mid Gain and Side Gain controls.
Enable
Mid Gain Mid Gain adjusts the level of signals in the middle of a stereo signal. The
available range is -12 dB to +6 dB, available in 0.1 dB steps. To quickly re-
turn to the 0 dB setting, click the MID text label.
Side Gain Side Gain adjusts the level of signals at the sides of a stereo signal. The avail-
able range is -12 dB to +6 dB, available in 0.1 dB steps. To quickly return to
the 0 dB setting, click the SIDE text label.
UAD Powered Plug-Ins Manual - 382 - Chapter 38: Precision K-Stereo Ambience Recovery
Output Gain Controls
Refer to Figure 114 below for the controls in this section.
L/R Gain Enable This switch enables/disables the Left/Right Gain and Link controls.
Link This switch links (gangs) the Left/Right Gain controls for ease of operation
when both channels require the same value. Disable Link when independent
left/right control is desired.
Note: When Link is inactive and Link is engaged, the left gain value is cop-
ied to the right gain. Any offset between the gain values is lost.
Left/Right Gain The independent Left and Right Gain have an available range of -24 dB to
+12 dB, available in 0.1 dB steps. To quickly return to the 0 dB setting, click
the respective LEFT or RIGHT text labels.
Note: The right channel gain control is disabled when the plug-in is used in
a mono-in/mono-out configuration.
UAD Powered Plug-Ins Manual - 383 - Chapter 38: Precision K-Stereo Ambience Recovery
Output Level Meters
The stereo peak/hold meters display the signal level at the output of the plug-
in. The meter range is from –30 dB to 0 dBFS. Signal peaks are held for 3 sec-
onds before resetting.
Power
When the Power switch is in the OFF position, the interface
elements do not illuminate, plug-in processing is disabled,
and UAD DSP usage is reduced (unless UAD-2 LoadLock is
enabled).
UAD Powered Plug-Ins Manual - 384 - Chapter 38: Precision K-Stereo Ambience Recovery
Factory Preset Notes by Bob Katz
Precision K-Stereo includes factory presets designed by Bob Katz for use with
his signature plug-in. Descriptions about these presets are listed below.
The Default preset and presets with the “BK” prefix are the settings created by
Mr. Katz. Two categories are included: “MIX” presets for use during mixing,
and “MSTR” for use during mastering.
Default When Precision K-Stereo is instantiated, it automatically starts with the Default
preset, which sets the Ambience Level to 0 dB (a nominal starting point which
works well with a lot of music), engages Wide and Deep, and sets everything
else to neutral. Feel free to turn the Ambience Level up or down to taste or to
explore the possibilities. The rest of the factory presets are provided to dem-
onstrate possibilities, but since there are very few controls, it’s easy to get the
Precision K-Stereo working for any situation.
BK-MSTR-Rock This preset has Ambience Level at 0 dB, Wide and Deep engaged, and the
Tight Bass Ambience Low Cut filter set to 125 Hz to maintain a tight bass instrument
while increasing the size and depth of the rest of the instruments.
BK-MSTR-Rock This preset has Ambience Level at 0 dB, Wide and Deep engaged, Ambience
Tight Drums Low Cut filter set to 125 Hz, Ambience High Cut Filter set to 10 kHz. This
maintains the bass instrument tight (not as affected by the Ambience Level) as
well as softens the ambience of the high frequencies to tighten the percussion,
but it retains ambience in the midrange to enhance vocals and midrange in-
struments.
BK-MSTR-String This preset has Ambience Level at +1 dB, Wide is disengaged, Deep is en-
Ensemble gaged. This is very useful, as the name implies, for enhancing the ambience
of a small ensemble or solo instrument without stretching it to the extreme
sides, maintaining the ensemble’s small size but still help its richness and
depth. Try this preset during mixing on a stereo-miked solo guitar (instead of
a reverb chamber).
BK-MSTR-Full This is the same as the default preset. Turn the Ambience Level up or down to
Orchestra A taste. Perhaps add some Ambience EQ to warm up the sound, or add some
presence to the ambience, depending on the nature of the reverberation in
the original recording.
UAD Powered Plug-Ins Manual - 385 - Chapter 38: Precision K-Stereo Ambience Recovery
BK-MSTR-Full Same as Full Orchestra A, but the high cut filter is set to 10 kHz which softens
Orchestra B the high frequency ambience to tighten the percussion.
BK-MSTR-Clear If the hall or chamber in the original recording is missing some presence,
Presence here’s a suggestion on what to do.
BK-MSTR-Raise This preset subtly raises the Mid level 1 dB above the side level and recovers
Mid Instruments a bit of the spacious ambience which is commonly lost when the mid/side ra-
tio is raised.
BK-MIX-Big Try this preset on a stereo recording of a piano to enhance the size and body
Steinway of the instrument without losing its definition. This preset will illustrate how am-
bience EQ is very different from direct EQ. Here we turn up the bottom end
and lower midrange of the ambience channel. It might turn a six-foot Yamaha
into a nine-foot Steinway, so be careful, or maybe that’s exactly what you
want to do!
BK-MIX-Big This preset turns up the ambience level a bit to quickly show you the possibil-
ities.
BK-MIX-Too Big This preset turns up the ambience level very far to quickly show you extreme
possibilities.
UAD Powered Plug-Ins Manual - 386 - Chapter 38: Precision K-Stereo Ambience Recovery
CHAPTER 39
Precision Limiter
Overview
The Universal Audio Precision Limiter™ is a single-band, look-ahead, brick-
wall limiter designed primarily for mastering with program material. The easy-
to-use Limiter achieves 100% attack within a 1.5ms look-ahead window,
which prevents clipping and guarantees zero overshoot performance. Both
the attack and release curves are optimized for mastering, which minimizes
aliasing.
The Precision Limiter is yet another indispensable UAD tool for your audio ar-
senal.
Controls Overview
Control knobs for the Precision Limiter behave the same way as all UAD plug-
ins. Input, Output, and Release values can be modified with text entry.
The Precision Limiter introduced a new control style for UAD plug-ins. For the
Mode, Meter, Scale, and Clear parameters, click the parameter label, the
value text, or the LED to toggle between available values.
Input The Input knob controls the signal level that is input into the limiter. Increasing
the input will result in more limiting as the input signal exceeds 0 dB.
Output The Output knob determines the maximum level at the output of the plug-in.
This control does not affect the actual limiting.
The Precision Limiter always limits the signal to 0 dB internally, and the actual
output is set by attenuating this internal level. Likewise, the input control can
drive the signal over 0 dB to get more limiting.
If the Precision Limiter is the last processor in the signal path when mixing
down to disk (bouncing), the Output value will be the level of the highest peak
in the resultant audio file.
The default value is –0.10 dB. The available range is from –12 dB to 0 dB.
Non-zero values are always negative, therefore during text entry operations
positive or negative values may be entered and the result will be negative.
Auto Mode
When the Release knob is fully clockwise, Automatic mode is active. In Auto
mode, release time is program-dependent. Isolated peaks will have a fast re-
lease time, while program material will have a slower release.
Note: You can type “A” or “a” to enter Auto mode during text entry.
Mode The Mode switch affects the attack shape of the limiter. Subtle tonal variations
are possible by switching the Mode between A and B.
Mode A is the default shape, suitable for most material, while Mode B can be
particularly useful on minimal and/or acoustic program material, yielding a
more subtle touch.
Power The Power switch determines whether the plug-in is active. When the Power
switch is in the Off position, plug-in processing is disabled and UAD DSP us-
age is reduced (unless UAD-2 DSP LoadLock is enabled). When the plug-in is
bypassed with this switch (but not by the host bypass), the VU meter displays
the unprocessed input signal level.
K-System The Precision Limiter has precise, calibrated stereo metering. It offers the op-
tion to use K-System metering, which is a method devised by renown audio
engineer Bob Katz (http://digido.com). The K-System is essentially a method
of integrating metering and monitoring levels to standardize the apparent
loudness of audio material while providing useful visual feedback of average
and peak levels.
With the K-System, programs with different amounts of dynamic range and
headroom can be produced by using a loudness meter with a sliding scale,
because the moveable 0 dB point is always tied to the same calibrated mon-
itor SPL. The Precision Limiter provides several meter ranges for various types
of program material (see “Type” on page 390).
The K-System can help combat the bane of the “loudness wars” which is all-
too common in today’s music, whereby material is made to appear louder
when compared to other material at the same playback volume, at the ex-
pense of dynamic range and fidelity.
Type The Type switch defines the 0 dB point in the meter scale (see “Sliding Meter
Scale” on page 390). There are three different K-System meter scales, with
0 dB at either 20, 14, or 12 dB below full scale, for typical headroom and
SNR requirements of various program materials.
PK-RMS
K-20
K-14
K-12
K-20
K-20 mode displays 0 dB at –20 dB below full scale. K-20 is intended for ma-
terial with very wide dynamic range, such as symphonic music and mixing for
film for theatre.
K-14
K-14 mode displays 0 dB at –14 dB below full scale. K-14 is intended for the
vast majority of moderately-compressed material destined for home listening,
such as rock, pop, and folk music.
K-12
Peak-RMS
Meter Response The main stereo Input/Output meter actually displays three meters simulta-
neously: The RMS and instantaneous peak levels, which follow the signal,
and the “peak-hold” (also known as global peak) level.
The peak-hold level is the maximum instantaneous peak within the interval set
by the Hold button, and is also displayed as text to the right of the meters. To
reset the peak hold levels, press the Clear button.
Gain Reduction The Gain Reduction meter displays the amount of limiter gain reduction. More
Meter green bars moving to the left indicate more gain reduction is occurring.
Gain reduction only occurs when the input signal level exceeds 0 dB. There-
fore, increasing the Input knob usually results in more gain reduction.
Meter The Meter switch specifies the signal source for the main stereo meter, either
input or output.
Input
When the Meter switch is in Input mode, the main level meters display the sig-
nal level at the input of the plug-in (and is not affected by the Input knob).
Output
When the Meter switch is in Output mode, the main level meters display the
level at the output of the plug-in. When the Limiter is enabled, the Output and
Input knobs will affect this display.
Scale The meter Scale switch increases the resolution of the main stereo level meter
(See Figure 117 below). The meter range that is displayed in Normal and
Zoom modes is dependent upon the meter Type setting (see “Type” on
page 390).
The main level meters in Normal mode, and the gain reduction meter in both
Normal and Zoom modes, are linear (level differences between LED segments
is the same). In PK-RMS and K-20 Zoom modes however, the main level
meters use two different linear ranges for increased accuracy.
The ranges and response for each meter type and scale is detailed below.
PK-RMS
K-20
K-14
K-12
Clear The meter Peak Clear switch clears the meter peak value display. It affects
both the peak LED’s and the peak text display.
Note: Compensating for Precision Limiter is not required if the host applica-
tion supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs.
Precision Maximizer
Overview
The Precision Maximizer is a dynamic impact processor that uniquely en-
hances the apparent loudness, warmth, and presence of individual tracks or
program material without appreciably reducing dynamic range or peak level
control. Significant audio improvements can be achieved without the fatigu-
ing artifacts typically associated with traditional dynamic processors.
The nature of the source material, as well as the input levels to the processor,
also greatly affect the sonic character at the output. The Limit function and 3-
band mode enable further manipulation of signal levels for additional cre-
ative options.
Note: See “Operating Tips” on page 400 for practical usage information.
Signal Flow The input signal first passes through the Input control (page 396), then the In-
put Meter (page 396), before arriving at the Bands divider (page 397). After
being optionally divided by the Bands parameter, the signal is then split into
the dry path and the wet saturation path. The saturation path is processed by
the Shape control (page 397), then the wet and dry signals are combined
with the Mix control (page 398). Finally, the mixed signal is processed by the
Limit control (page 398) before being passed to the Output control
(page 399) and Output Meter (page 399).
Input Meter The stereo peak Input Meter displays the signal level at the input
of the processor, after the Input control.
Input The Input Level knob controls the signal level that is input to
the plug-in. Increasing the input will generally result in
more processing (depending on the settings of the other
parameters).
The available range is ±12 dB. A good starting point for sonic experimenta-
tion is to set the input level so the input peaks occur around 0 dB, then adjust
the other controls to taste.
Shape values between 0-50% will make the effect more subtle, but a richer
sound is still obtained. Lower Shape values accentuate louder peaks, which
can sound great on percussive instruments. Solo instruments can also benefit
from lower Shape values by taming the peaks while maintaining dynamic
range.
The most natural warmth and tube-like distortion is obtained with Shape at
50%. This setting generates the lowest amount of higher order harmonics and
most closely emulates characteristic tube qualities.
One-band mode is the normal setting for general usage. In this mode, more
dramatic results can often be obtained because more saturation effect is pos-
sible before the output is clipped. At higher levels of distortion, the phase of
the harmonics are also better retained in this mode, which usually produces
a more desirable sound quality.
Click the Bands button to change the mode. Alternately, you can click+hold
the LED area and drag like a slider to change the value.
Limit The Limit function provides a second stage of soft-saturation just be-
fore the output control for the plug-in. It prevents digital “overs” by
protecting the plug-in output from exceeding 0 dBFS. Limit enters into
clipping range gradually instead of hard-clipping at 0 dB.
The Limit function has the same saturation form as the Shape parameter, but
the effect is milder. Limit is especially useful for three-band mode, where out-
put peaks over 0 dB (and clipping) can occur. However, great results can also
be obtained in one-band mode when Limit is engaged.
Click the Limit button to engage Limit. Alternately, you can click+hold the LED
area and drag like a slider to change the value.
Note: UAD DSP usage is slightly decreased when Limit mode is inactive (un-
less UAD-2 DSP LoadLock is enabled).
Mix The Mix knob is a mix control for the plug-in. Mix deter-
mines the balance between the original and the pro-
cessed signal.
Output Meter The stereo peak Output Meter displays the signal level at the out-
put of the plug-in. The displayed range is from –40 dB to 0 dB.
The very top segment of the Output Meter is a clip LED (one each
for the left and right channels) which illuminates when the signal
exceeds 0 dB. The clip segments are held for three seconds be-
fore resetting.
Note: The Limit function prevents the output signal from exceeding
0 dB. Therefore, the clip LED’s will only illuminate if Limit is off.
You can click-hold the power switch then drag it like a slider to quickly
Note:
compare the enabled/disabled state.
Precision Multiband
Overview
The Precision Multiband is a specialized mastering tool that provides five
spectral bands of dynamic range control. Compression, expansion or gate
can be chosen separately for each of the five bands. The unparalleled flexi-
bility and easy to follow graphical design of the Precision Multiband make it
the ideal tool for the novice as well as the seasoned mastering engineer.
The Precision Multiband can be used for anything from complex dynamic con-
trol to simple de-essing. Two filter bank modes offer precise linear-phase or
minimum-phase gain control; use the linear-phase option for perfectly phase-
coherent results, or minimum-phase for a more “analog” sound. Both filter
bank modes achieve the magnitude response of a Linkwitz-Riley filter and pro-
vide perfect magnitude reconstruction.
Five separate frequency bands are available for processing. Each band is
identified by a unique color, and all controls specific to the band have the
same color. This helps to visually associate parameters to the band that they
affect. The band names and their colors are:
• Low Frequency (LF): Red
• Low-Mid Frequency (LMF): Orange
• Mid Frequency (MF): Yellow
• High-Mid Frequency (HMF): Green
• High Frequency (HF): Blue
Band Select Selecting a band causes the controls for that band to be displayed in the Band
Controls area. Bands can be selected by using the Band Select buttons, or by
clicking in the EQ display.
The Band Select buttons at the top of the EQ Display specify which band pa-
rameters are displayed in the band controls section. Click the button to dis-
play the parameters for the band.
Band Parameters
Because the Band Controls for each of the five bands are identical, they are
only described once.
All Button The ALL button provides a facility to link controls and copy parameter
values to all bands when adjusting the current band. Each of the Band
Controls has an ALL button. The behavior of the ALL button is the same for all
the Band Controls in all the bands (with the exception of the Type switch; see
“Type Switch” on page 405)
The ALL button can perform three functions: Relative Link, Absolute Link, and
Copy Value. Note that the ALL button cannot be automated.
Relative Link
In Relative mode, changes to a band control will change the same con-
trol in the other bands by a relative amount (i.e. the same amount), until
any single band reaches its minimum or maximum value.
Single-click the ALL button to enter Relative mode; the button background
changes to blue.
When adjusting a control in Relative mode, it may appear that the full range
of the active control is unavailable; this occurs when a different band (not the
active band) has reached the end of its range.
In Relative mode the Gain value can also be adjusted by dragging the Gain
“handle” in the EQ Display (see “EQ Display” on page 408).
Note: No change occurs to the parameter values unless the control is actually
moved. This allows you turn off relative linking without making any changes.
Absolute Link
In Absolute mode, changes to a band control will force the same control
in the other bands to snap to the same value as the current band.
Shift-click the ALL button to enter Absolute mode; the button background
changes to red.
In Absolute mode the Gain value can also be adjusted by dragging the Gain
“handle” in the EQ Display (see “EQ Display” on page 408).
Note: No change occurs to the parameter values unless the control is actually
moved. This allows you turn off absolute linking without making any changes.
Copy
Note: Careful with the control Copy function! It will delete the existing values
in the other bands, and no undo is available.
Type Switch The Type button defines the dynamic nature of the band, allow-
ing each band to function as a compressor, expander, or noise
gate, independent of the Type value in the other bands.
Click the Type switch to scroll through the three available values.
The Type text (compress, expand, gate) behaves as a vertical “slider” and
can be used for changing the Type as well. Alternately, the Type can be
changed using the Dynamics Meters label text (see “Dynamics Meters” on
page 411).
Note: When changing the band Type, the Ratio value for the band changes
to 1:1. This prevents dramatic jumps in the output level that could result from
extreme values of other band parameters.
When a band is set to Compress, the dynamic range of the band will be re-
duced (dependent upon the band threshold and input level). This is the typical
value in multiband compression.
EXPAND
When a band is set to Expand, the dynamic range of the band will be in-
creased (dependent upon the band threshold and input level).
GATE
When a band is set to Gate, the band behaves as a gate. A gate stops the
signal from passing when the signal level drops below the specified threshold
value.
Gates are generally used to reduce noise levels by eliminating the noise floor
when the ‘main’ signal is not present, but they are also useful for special ef-
fects.
Ratio Ratio determines the amount of gain reduction (or expansion) for the band.
For example: When a band is set to Compress, a value of 2 (expressed as a
2:1 ratio) reduces the signal by half, with an input signal of 20 dB being re-
duced to 10 dB.
The available range depends on the value of the Type parameter, as follows:
• Ratio range in Compress mode is 1:1 to 60:1
• Ratio range in Expand mode is 1:1 to 1:4
• Ratio range in Gate mode is 1:1 to 8:1
Release Release sets the amount of time it takes for processing to cease once the input
signal drops below the threshold level. Slower release times can smooth the
transition that occurs when the signal dips below the threshold, especially use-
ful for material with frequent peaks. However, if you set too large of a Release
time, processing for sections of audio with loud signals may extend to lengthy
sections of audio with lower signals. The available range is 20 milliseconds
to 2 seconds.
Gain The Gain control adjusts the output level of the band. Generally speaking, ad-
just the Gain control after the desired amount of processing is achieved with
the Threshold control. The Gain control does not affect the amount of process-
ing. The available range is ±12 dB.
Note:The Gain for each band can also be modified by control points in the
EQ Display (see “Curve Control Points” on page 408).
Band For details about the band frequencies, see “Frequency Controls” on
Frequencies page 410.
Band Enable & For details about the band enable and solo controls, see “Dynamics Meters”
Solo on page 411.
Band Curves The Band Curves show the relative frequency and gain settings of the bands.
The sides of the colored curves are a representation of each band’s frequency
settings, and the top of each curve represents the band’s gain setting.
Note: The currently selected band is displayed with a thicker bold line. Dis-
abled bands (see “Band Enable & Solo” on page 407) are displayed with a
thinner line.
EQ Response The EQ Display also shows the processed EQ response dynamically as a light
blue line across all bands (if the Dynamic EQ display option is enabled; see
“EQ Display Switch” on page 413).
Curve Control Band gain, center frequencies (cF), crossover frequencies (xF), and band-
Points width can be modified by manipulating the colored band curves in the EQ
Display with the cursor.
When the cursor is moved over the pre-defined “hot spots” in the EQ Display,
the cursor changes shape to indicate that adjustments can be made. Each of
these control points and their corresponding available adjustments are de-
tailed below.
Adjusting Gain If the cursor is moved slightly lower than the above ex-
and cF ample, the gain and center frequency can be ad-
justed simultaneously, without adjusting the band-
width. In this case the cursor changes to an
up/down/left/right arrow when hovered over the hot
spot to indicate the direction available for dragging.
Note: Frequencies can also be adjusted by using the Frequency Value param-
eters (see“Frequency Values” on page 410).
The frequencies for each band can be modified by entering the values directly
and by manipulating the colored band curves.
Frequency
Values
All band frequency values are always displayed. Values can be input directly
using text entry.
For the center frequencies, if a value is entered that is still within the accept-
able min/max range but the center frequency can not reach the input value
because it would require a change to the width, then the nearest allowable
value is set. If a lower or greater center frequency value is desired (i.e., the
original center frequency value attempt), the width of the band must be re-
duced first, then the center frequency adjusted again. It's easiest to see the cF
limits at the given width by dragging the center frequency with the mouse.
To modify the frequency (and gain) values using the EQ Display, see “Curve
Control Points” on page 408).
In Gate mode, there is simultaneous inward metering from the top and bottom
to the center, which provides a visual “gate” that opens and closes along with
the gate processing.
Dynamics Meters signal peaks are held for 3 seconds before resetting.
Band Enable Each band has an Enable button. The Enable but-
Buttons ton for the band is just below its dynamics meter.
Band Solo Each band has a Solo button. The Solo button for
Buttons the band is just below its Enable button.
When one or more bands are in Solo mode, only the soloed bands can be
heard and the other bands are muted.
Global Controls
Input Level Knob The Input Level knob controls the signal level that is input to the plug-in. In-
creasing the input may result in more processing, depending on the values of
the band parameters. The default value is 0 dB. The available range is
±20 dB.
Mix The Mix control determines the balance between the original
and the processed signal. The range is from 0% (no dynamics
processing) to 100% (wet, processed signal only). The default
value is 100%.
Output Level The Output Level knob controls the signal level that is output from the plug-in.
Knob The default value is 0 dB. The available range is ±20 dB.
EQ Display The EQ Display mode can be static or dynamic. The EQ Display switch deter-
Switch mines the active mode. Click the switch to toggle the mode.
EQ
In this mode, the EQ Display is static. Only the colored frequency bands are
displayed.
Dynamic EQ
In Dynamic EQ mode, a light blue line in the EQ Display indicates the actual
frequency response of the processor in realtime.
Phase Mode The filter bank mode of Precision Multiband can be specified with the Phase
Switch Mode switch. Click the switch to toggle the mode. The default mode is Linear.
Both filter bank modes achieve the magnitude response of a Linkwitz-Riley fil-
ter and provide perfect magnitude reconstruction.
Linear
Use linear phase mode when perfectly phase-coherent results are desired.
Minimum
Minimum phase mode provides a more “analog” (i.e., colored) sound and
uses slightly less UAD CPU.
While the DSP savings are rather negligible, there is a functional advantage
to Min phase mode. When Precision Multiband is used as a track compres-
sor, Min phase mode provides the advantage of rapid response time of the fil-
ters for smooth automation and filter sweeps.
When the Power switch is in the Off position, plug-in processing is disabled
and UAD DSP usage is reduced (unless UAD-2 DSP LoadLock is enabled).
When the plug-in is bypassed with this switch (but not by the host bypass), the
I/O meters and the Input Level knob remain active.
Introduction
The Pultec Passive EQ Collection is the final word in fastidious circuit repro-
duction of Pulse Techniques’ revered passive EQs, considered to be the most
popular outboard studio equalizers ever made. With the UAD-2’s increased
DSP power and ten years of UA’s technological advancements since the orig-
inal Pultec and Pultec-Pro plug-ins, UA has revisited the Pultec family. Main-
taining the spot-on filter fits and all-important EQ band interactions, the Pultec
Passive EQ Collection expands on sonic detail by modeling the overbuilt
transformers and complex tube amplifiers of these must-have production tools.
The sophisticated technology used in this new plug-in collection captures all of
these tone-enhancing characteristics for individual sources to full program ma-
terial.
UAD Powered Plug-Ins Manual - 415 - Chapter 42: Pultec Passive EQ Collection
Pultec Passive EQ Collection Screenshots
Figure 124. The Pultec-Pro Legacy plug-in window, which includes both the original EQP-1A and the original MEQ-5
UAD Powered Plug-Ins Manual - 416 - Chapter 42: Pultec Passive EQ Collection
Pultec Plug-In Family
The complete Pultec family is comprised of five individual plug-ins, as seen on
the previous page. Each variation has its own unique sonic characteristics.
Pultec Passive The Pultec Passive EQ Collection (introduced in UAD v7.1) provides access to
EQ Collection three historical and highly coveted revisions in the Pultec product line.
The plug-ins in the Pultec Passive EQ Collection benefit from the additional
processing power afforded by the UAD-2, plus more than 10 years of UA’s
evolving sophistication designing plug-ins. While the original EQP-1A Legacy
and Pultec-Pro Legacy plug-ins remain an excellent rendition of the hardware,
the plug-ins in the newer Pultec Passive EQ Collection add the transformer and
complex tube amplifier nonlinearities for even more authenticity. The sophis-
ticated modeling technology used in the newer plug-in collection captures all
of these tone-enhancing characteristics.
Pultec EQP-1A
Pultec MEQ-5
Pultec HLF-3C
The HLF-3C completes the Pultec Passive EQ Collection. This plug-in has
12 dB per octave low and high cut filters, providing broad retro-tonal sculpt-
ing or bygone-era special effects, without the inconvenience of insertion loss
found with the unamplified passive hardware.
UAD Powered Plug-Ins Manual - 417 - Chapter 42: Pultec Passive EQ Collection
Pultec Legacy The Pultec EQP-1A Legacy and Pultec-Pro Legacy plug-ins (Figure 124 on
page 416) are the original versions of our Pultec emulations that run on both
UAD-1 and UAD-2 devices. They still have a great sound and are very usable,
especially when there are not enough DSP resources to use the second-
generation versions in the newer Pultec Passive EQ Collection.
To accommodate the limited DSP resources of the original UAD-1, the trans-
former and I/O distortion characteristics were not modeled in these plug-ins.
This makes these legacy versions especially useful in situations where less dis-
tortion, and less DSP usage, is desirable.
Operational Overview
The Pultec EQP-1A/MEQ-5 combination is still standard fare in recording stu-
dios and was once widely used in mastering sessions. Whether used inde-
pendently or together, mono or stereo, the Pultec Collection provides a com-
plete vintage EQ palette for individual sources such as bass or kick drums,
subgroups such rhythm, horn or string sections, or on the master bus. The
EQP-1A’s 16 KCS high frequency setting is famous for adding “air” to master
sources.
Although unintended by its designers, the Pultec EQP-1A is coveted for its
unique ability to boost and cut the same low frequency simultaneously, creat-
ing a tightening effect as a naturally interactive resonant dip near the selected
frequency. This has the sonic effect of simultaneously tightening and boosting
bass frequencies. Select the bass frequency then adjust the balance of Boost
and Cut to tune the effect.
EQP-1A The original EQP-1A hardware unit has an inherent level boost of approxi-
Insertion Boost mately 1.13 dB when it is in the signal path. This inherent boost is present in
the EQP-1A plug-in models as well.
Frequency The original Pultec hardware used frequency unit names that were conven-
Conventions tional before the frequency unit of “Hertz” was widely adopted. The UAD
Pultec plug-ins adopt the original frequency unit name conventions.
“CPS” is an acronym for Cycles Per Second, which is now more commonly re-
ferred to as Hertz and abbreviated as Hz. KCS is an acronym for KiloCycles
per Second, which is now more commonly referred to as KiloHertz and ab-
breviated as kHz.
UAD Powered Plug-Ins Manual - 418 - Chapter 42: Pultec Passive EQ Collection
Artist Presets The Pultec Passive EQ Collection includes artist presets from prominent Pultec
users. Some of the artist presets are in the internal factory bank and are ac-
cessed via the host application’s preset menu. Additional artist presets are
copied to disk by the UAD installer so they can be used within Apollo’s Con-
sole application. The additional presets can be loaded using the Settings
menu in the UAD Toolbar (see “Using UAD Powered Plug-Ins” in Chapter 7 of
the UAD System Manual).
Note: Presetscreated with the original Legacy plug-ins are incompatible with
the equivalent newer model plug-ins.
Upsampling All UAD Pultec plug-ins use an internal upsampling technique. The upsam-
pling results in a slightly larger latency than other UAD plug-ins. See See “Up-
sampled Plug-Ins” on page 550. for more information.
Control The EQP-1A can control three frequency bands simultaneously, using three
Grouping groups of interacting parameters.
The first group adjusts the low frequencies and has three controls: boost, at-
tenuation, and frequency select. The second group adjusts the high frequen-
cies and has three controls: boost, bandwidth, and frequency select. The third
group also adjusts the highs and has two controls: attenuation amount and
frequency select.
The placement and grouping of the sections and their related controls are
shown in Figure 125.
UAD Powered Plug-Ins Manual - 419 - Chapter 42: Pultec Passive EQ Collection
EQ Enable
This is the EQ enable control. Like the original hardware, the signal
is still colored even when this switch is in the out (down) position, be-
cause the signal is still passing through the I/O circuitry. If a true by-
pass is desired, use the Bypass/Gain knob.
Bypass/Gain
The function of this control differs between the newer EQP-1A and the Legacy
version, as described below.
Pultec EQP-1A
This dual purpose knob is an output gain control, and the plug-
in bypass control. The available output gain range is ±12 dB.
Tip:Click the “OFF” text label or the red power lamp to toggle between by-
pass and the previous value.
Tip: Click the “0” text label to set the gain to 0 dB.
This is the plug-in bypass control. The knob can be used to com-
pare the processed settings to that of the original signal, or to dis-
able the plug-in to reduce UAD DSP load (DSP load is not reduced
if UAD-2 DSP LoadLock is enabled).
Tip: To cycle through the available values, click the “CPS” text
label, or shift+click the text label to cycle through available val-
ues in reverse. This function is unavailable with the Legacy ver-
sion of the plug-in.
UAD Powered Plug-Ins Manual - 420 - Chapter 42: Pultec Passive EQ Collection
LF Boost
This knob determines the amount of low shelf gain to be applied to the fre-
quency set by the CPS switch.
LF Attenuation
This knob (“ATTEN”) determines the amount of low shelf cut to be applied to
the frequency set by the CPS switch.
Background
HF Q
UAD Powered Plug-Ins Manual - 421 - Chapter 42: Pultec Passive EQ Collection
HF Boost
This knob controls sets the amount of gain for the high frequency portion of the
equalizer.
Tip: To cycle through the available values, click the “ATTEN SEL”
text label, or shift+click the text label to cycle through available
values in reverse. These shortcuts are unavailable with the Legacy version of
the plug-in.
HF Attenuation
This knob (“ATTEN”) determines the amount of high shelf cut to be applied to
the frequency set by the Attenuation Selector switch.
The first group adjusts the low–mid frequencies and has two controls: fre-
quency select and boost. The second group adjusts the mid frequencies and
has two controls: frequency select and attenuation. The third group adjusts
high-mids and has two controls: frequency select and boost. The placement
and grouping of the sections and their related controls are shown in
Figure 126.
UAD Powered Plug-Ins Manual - 422 - Chapter 42: Pultec Passive EQ Collection
EQ Enable
This is the EQ enable control. Like the original hardware, the signal is
still colored even when this switch is in the out (down) position, be-
cause the signal is still passing through the I/O circuitry. If a true by-
pass is desired, use the Bypass/Gain knob (MEQ-5) or the Enable
switch (Pultec-Pro Legacy; see page 420).
LM Boost
Tip: To cycle through the available values, click the “DIP” text
label, or shift+click the text label to cycle through available values in reverse.
These shortcuts are unavailable with the Legacy version of the plug-in.
Mid Dip
UAD Powered Plug-Ins Manual - 423 - Chapter 42: Pultec Passive EQ Collection
High Peak HM Frequency
Controls
This switch determines the frequency of the high-midrange
portion of the equalizer. Five frequencies are available: 1.5,
2, 3, 4, and 5 KCS.
HM Boost
Bypass/Gain
Tip:Click the “OFF” text label or the red power lamp to toggle between by-
pass and the previous value.
Tip: Click the “0” text label to set the gain to 0 dB.
Unity Gain The Pultec HLF-3C hardware unit is a true passive design; there are no in-
put/output amplifiers and it does not require any external power. As a result,
there is an inherent loss of signal level when using the HLF-3C hardware.
The Pultec HLF-3C plug-in compensates for this inherent signal loss for simpli-
fied use in the modern era; it has unity gain upon insertion (there is no inser-
tion loss until one or both of the cut filters is engaged).
UAD Powered Plug-Ins Manual - 424 - Chapter 42: Pultec Passive EQ Collection
The HLF-3C interface is very simple and includes only the three controls shown
in Figure 127.
Enable This toggle switch is the plug-in bypass control. When in the down position
(bypassed), plug-in processing is disabled altogether. The plug-in is engaged
with the switch is in the up position.
This switch can be used to compare the processed settings to that of the orig-
inal signal, or to bypass plug-in processing to reduce UAD DSP load (DSP
load is not reduced if UAD-2 DSP LoadLock is enabled).
Note: The behavior of this toggle switch differs from the other UAD Pultec
plug-ins. Because the HLF-3C hardware is not internally amplified, there is no
I/O circuitry modeling to maintain when the EQ portion of the circuit is by-
passed (the entire hardware unit is the EQ portion).
Low Cut This rotary switch specifies the cutoff frequency of the low cut filter. Eleven fre-
quencies are available: 50, 80, 100, 150, 250, 500, 750, 1000, 1500,
and 2000 CPS.
Tip: To cycle through the available values, click the “CPS” text label, or
shift+click the text label to cycle through available values in reverse.
High Cut This rotary switch specifies the cutoff frequency of the high cut filter. Eleven fre-
quencies are available: 1.5, 2, 3, 4, 5, 6, 8, 10, 12, and 15 KCS.
Tip: To cycle through the available values, click the “KCS” text label, or
shift+click the text label to cycle through available values in reverse.
UAD Powered Plug-Ins Manual - 425 - Chapter 42: Pultec Passive EQ Collection
History
In 1951, Pulse Techniques introduced the first passive Program Equalizer, the
EQP-1. The passive EQ filter designs were originally licensed from Western
Electric. Founders Ollie Summerland and Gene Shenk made up the Teaneck,
New Jersey operation of Pultec. These two men comprised the engineering,
marketing, sales and production staff for the entire history of the company,
and made every item to order, all by hand. With the EQP-1A, Pultec im-
proved the original design with tube amplification to overcome the typical in-
sertion loss of passive equalizers. The EQP family of EQs would see many it-
erations, but the fundamental design would be Pultec’s flagship product until
the company’s closure in the early 80s.
UAD Powered Plug-Ins Manual - 426 - Chapter 42: Pultec Passive EQ Collection
CHAPTER 43
Raw Distortion
Modeled from a vintage early ‘80s Pro Co Rat, the Raw Distortion plug-in for
UAD-2 and Apollo interfaces is a faithful emulation of this legendary distor-
tion box, delivering all of the grit, dynamics, and raunch of the original hard-
ware.
Trapping Raw The Raw Distortion plug-in for UAD-2 and Apollo interfaces captures the orig-
for a Faithful inal hardware's unique, single op-amp circuit as well as its famous “back-
Emulation
wards” passive tone filter. This powerful tone control is at the heart of the Rat's
versatility, as it adds tube-like warmth to single-coils while also giving hum-
bucker-equipped guitars an ultra-musical “slice” to stand out in a mix.
Raw Distortion is not affiliated with, sponsored nor endorsed by any companies currently using
the Pro Co Rat name. The Raw Distortion name is used solely to identify the classic effect emu-
lated by Universal Audio’s product.
Unison The interaction of your instrument and the first pedal in your signal chain is an
Technology for essential ingredient to capturing a stompbox's unique character and tone.
Authentic Tone,
Touch, and Feel Thanks to Universal Audio's Unison technology, your guitar gets the same cir-
cuit interaction, gain range, and clip points of a vintage Pro Co Rat when you
plug in to an Apollo Twin, DUO, or QUAD. This gives you the true tone, feel,
and response of the original hardware.
Use the Raw on The Raw Distortion’s plug-in's singular voice can also be turned loose on bass,
Any Source drums, vocals, or synths, giving you a unique tone sculpting tool. Give a sub-
tle edge to a vocal or string patch, or bury a drum bus in a sea of molten dis-
tortion for tracks that defy description.
Standard DAW In much the same way as some premier recording and mix engineers use
Inserts stomp boxes in a mix, Raw Distortion can be used for creative purposes on
any source signal by placing it in any plug-in insert within a DAW. For typical
guitar tones, follow the pedal with a guitar amp emulation (as one would with
a hardware guitar pedal and amp).
Note: Since Hi-Z devices typically operate at much lower signal levels than
line-level devices, signal levels being routed into the pedal may need to be re-
duced to avoid undesirable input distortion.
Unison™ Raw features Unison technology for integration with the high-imped-
Technology with ance input hardware in Universal Audio’s Apollo audio interfaces.
Apollo
With Unison, Apollo’s Hi-Z inputs inherit all of the unique circuit in-
teraction, gain range, and clip points of the original guitar pedal.
For the most authentic stompbox tones, plug any high-impedance instrument
(guitar, bass, etc.) into Apollo’s Hi-Z instrument input and place the pedal
plug-in into the unique Unison INPUT insert on the same channel within
Apollo’s Console application. If desired, follow the Unison pedal plug-in with
another pedal or guitar amp emulation Console’s standard insert slots.
This Hi-Z workflow enables near-zero latency monitoring or recording with the
same input characteristics and dynamic response as the original pedal.
Note: This plug-in can be Unison-enabled with Apollo’s Mic or Line inputs.
However, because the original hardware has a high-impedance instrument
input only, Apollo’s Hi-Z input and Unison insert will provide the most accu-
rate sound and experience of the hardware pedal that is modeled.
Important: Unison is active only when the pedal plug-in is placed in the
unique INPUT insert available on Hi-Z inputs within Apollo’s Console applica-
tion. For complete Unison details, see the Apollo Software Manual.
Apollo’s front panel preamp knob can independently adjust the Distortion,
Volume, and Output controls available within the Unison pedal plug-in via
Gain Stage Mode. The control being adjusted can be remotely switched via
Apollo, so the control levels and their associated colorations can be tuned
from the hardware knob for precise physical tactile control, all without using
the Unison plug-in’s software interface.
Raw Controls
Distortion Distortion varies the amount of signal overdrive. Rotate the con-
trol clockwise to increase distortion and sustain.
Filter Filter adjusts the high-frequency content of the signal. Rotate the
control clockwise to increase the filter amount, which reduces
treble content.
Volume Volume adjusts the pedal's modeled output level. Rotate the con-
trol clockwise to increase the volume.
Power The stomp switch toggles between plug-in enable and disable.
Click the switch to toggle the Power state. Like the original hard-
ware, this is a true-bypass control. When disabled, the signal is
not colored by the circuitry.
Output Output controls the clean (unmodeled) gain at the output of the
plug-in. The available range is -24 dB to +12 dB.
Tip: Click the “0” label to return the control to zero dB.
RealVerb Pro
Overview
RealVerb Pro uses complex spatial and spectral reverberation technology to
accurately model an acoustic space. What that gets you is a great sounding
reverb with the ability to customize a virtual room and pan within the stereo
spectrum.
Room Shape and RealVerb Pro provides two graphic menus each with preset Room Shapes and
Material Materials. You blend the shapes and material composition and adjust the
room size according to the demands of your mix. Controls are provided to ad-
just the thickness of the materials – even inverse thickness for creative effects.
Through some very clever engineering, the blending of room shapes, size and
materials may be performed in real-time without distortion, pops, clicks or zip-
per noise. Once you've created your custom room presets, you can even
morph between two presets in real-time, with no distortion.
Resonance, RealVerb Pro also includes intuitive graphic control over equalization, timing
Timing and and diffusion patterns. To maximize the impact of your recording, we put in-
Diffusion
dependent control over the direct path, early reflections and late-field rever-
beration in your hands.
Stereo Capitalizing on the psychoacoustic technology that went into the design of
Soundfield RealVerb 5.1, we have incorporated some of those principals into RealVerb
Panning
Pro. Our proprietary Stereo Soundfield Panning allows you to spread and
control the signal between stereo speakers creating an impression of center
and width. The ability to envelop your listener in a stereo recording is an en-
tirely new approach to reverb design.
Don't rely on your old standby. Let RealVerb Pro bring new quality and space
to your recordings!
Pan
Direct Path
Source
Wet/Dry
Input
Mix
Early
EQ Delay
Reflections
Gain & Gain Output
Pans &
Mute Distance
Late-
Delay Field
Reverb
Figure 129 illustrates the signal flow for RealVerb Pro. The input signal is
equalized and applied to the early reflection generator and the late-field re-
verberation unit. The resulting direct path, early reflection, and late-field re-
verberation are then independently positioned in the soundfield.
Spectral Characteristics
The Shape and Material panels specify the room shape, room size, room ma-
terial and thickness. These room properties affect the spectral characteristics
of the room’s reflections.
Shape and Size The pattern of early reflections in a reverb is determined by the room shape
and size. RealVerb Pro lets you specify two room shapes and sizes that can
be blended to create a hybrid of early reflection patterns. There are 15 room
shapes available, including several plates, springs, and classic rooms; room
sizes can be adjusted from 1–99 meters. The two rooms can be blended from
0–100%. All parameters can be adjusted dynamically in real time without
causing distortion or other artifacts in the audio.
Blending bar
First shape
selector Second shape
pop-up selector pop-
menu up menu
1. Selecta room shape from the first (left) pop-up menu. The selected shape
appears in the left side of the Shape circle. Adjust the room size with the
top horizontal slider.
2. Select a room shape from the second (right) pop-up menu. The selected
shape appears in the right side of the Shape circle. Adjust the room size
with the bottom horizontal slider.
3. Blend the early reflection patterns of the two rooms by dragging the Blend-
ing bar. The relative percentages of the two rooms appear above their pop-
up menus. Drag to the right to emphasize the first room shape; drag to the
left to emphasize the second room shape. To use only one room shape,
drag the Blending bar so the shape is set to 100%.
The resulting early reflection pattern is displayed at the top of the Timing
panel (see Figure 134 on page 440), where each reflection is represented by
a yellow vertical line with a height indicating its arrival energy, and a location
indicating its arrival time.
Material and The material composition of an acoustical space affects how different fre-
Thickness quency components decay over time. Materials are characterized by their ab-
sorption rates as a function of frequency—the more the material absorbs a
certain frequency, the faster that frequency decays. RealVerb Pro lets you
specify two room materials with independent thicknesses, which can be
blended to create a hybrid of absorption and reflection properties. For exam-
ple, to simulate a large glass house, a blend of glass and air could be used.
Blending bar
First material
selector pop- Second material
up menu selector pop-up
menu
First material
Thickness Second material
control Thickness control
Note: While materials are used to control decay rates as a function of fre-
quency, the overall decay rate of the late-field reverberation is controlled from
the Timing panel (see Figure 134 on page 440).
1. Select a room material from the first (left) pop-up menu. The selected mate-
rial appears in the left side of the Material circle.
2. Adjust the thickness for the first material with the top horizontal slider:
• A default thickness of +100% yields normal, real-world decays for the ma-
terial.
• Thicknesses beyond the default (up to +200%) exaggerate how the frequen-
cies are absorbed and reflected.
• Negative thicknesses invert the response of the material. If the material nor-
mally absorbs high frequencies (causing them to decay quickly) and reflects
low frequencies (causing them to decay slowly), a negative thickness will in-
stead absorb low frequencies (causing them to decay quickly) and reflect
high frequencies (causing them to decay slowly).
• A thickness of 0% yields decay rates that are not affected by the material.
3. Select a material from the second (right) pop-up menu. The selected mate-
rial appears in the right side of the Material circle. Adjust the material thick-
ness with the bottom horizontal slider.
About the Some materials absorb high frequencies and reflect low frequencies, while
Materials other materials absorb low frequencies and reflect high frequencies. This
characteristic is determined by the material surface and density.
At a thickness of 100%, fiberglass rolls off the high frequencies, a little bit
each millisecond. After a while the high frequencies dissipate and the low fre-
quencies linger. If we were to take fiberglass and increase its thickness to
+200%, the high frequencies would roll off even faster. At +200%, this high
frequency decay happens at twice its normal rate, producing a very heavy re-
verberant tail. At –200%, a very “sizzly” late field is created.
Some materials, such as plywood, naturally absorb low frequencies while re-
flecting high frequencies. Since plywood is usually very flat with little surface
texture to capture high frequencies, high frequencies tend to be reflected. At
+100%, the reverberation produced is very sizzly and increasingly bright. At
–100%, it is very heavy.
Keeping this in mind, if you look at the graphics in the material control panel,
you can get a sense of how chosen materials, material blend, and thickness
will affect the decay rate as a function of frequency. Hard materials that have
lots of small cavities (Brick, Gravel, Plaster on Brick) and soft materials (Car-
pet, Grass, Soil) tend to absorb high frequencies. Flat, somewhat flexible ma-
terials (Heavy Plate Glass, Hardwood, Seats) tend to reflect high frequencies.
Marble is the one material that tends to uniformly reflect all frequencies.
You probably noticed the artificial materials the top of the Materials menu.
These are materials designed to have predictable behavior and can be very
handy for achieving a desired reverberation preset when you know what de-
cay rates you desire. All these materials preferentially absorb high frequen-
cies; they give the selected decay time at low frequencies, and a much shorter
decay time at high frequencies. The frequency in each graphic is the transi-
Many hardware and software reverbs tend to compensate for the high fre-
quency absorption that air provides. RealVerb Pro instead provides “Air” as
a material. If you do not choose to use Air as one of the materials, you can
effectively compensate for the high frequency absorption properties of air
with the Resonance filters. Set the right-hand Transition Frequency slider to
4.794 kHz, and bring the level down about –10 dB to –15 dB for large to
huge rooms, and down about –4 dB to –9 dB for small to medium rooms.
To help you out, the following lists classify the materials under two headings:
those that tend to reflect high frequencies, and those that tend to absorb them.
They are listed in order of their transition frequencies, from lowest to highest.
1. Drag the Band Edge controls horizontally for the second and third bands to
the desired frequencies. The first band is preset to 16 Hz. The frequencies
for all three bands are indicated in the text fields at the bottom of the Res-
onance panel.
2. Adjustthe amplitude of the bands (from –60 dB to 0 dB) by dragging their
Amplitude controls either up or down. The amplitude values for all three
bands are indicated in the text fields at the bottom of the Resonance panel.
The shape of the EQ curve is displayed in the Resonance graph.
1. Drag the Amplitude control for the second EQ band all the way down.
2. Drag the Amplitude controls for the first and third bands all the way up, to
equal values.
1. Drag the Amplitude control for the second EQ band all the way up.
2. Drag the Amplitude controls for the first and third bands all the way down,
to equal values.
3. Adjust the Band-edge controls for the second and third bands so they are
adjacent to each other. To raise the frequency for the low-shelf, drag to the
right with the Band-edge control for the second band. To lower the fre-
quency for the low-shelf, drag to the left with the Band-edge control for the
third band.
4. Toattenuate the frequencies below the shelf frequency, drag the Amplitude
controls for the first and second bands up or down. For a true shelf EQ,
make sure these amplitudes are set to equal values.
Timing
The Timing panel offers control over the timing and relative energies of the
early reflections and late-field reverberations. These elements affect the re-
verb’s perceived clarity and intimacy. The early reflections are displayed at
the top of the Timing panel, with controls for Amplitude and Pre-delay. The
late-field reverberations are displayed at the bottom, with controls for Ampli-
tude, Pre-delay, and Decay Time. To illustrate the relation between both re-
verb components, the shape of the other is represented as an outline in both
sections of the Timing panel (see Figure 134).
Predelay
control
Late-Field
Amplitude Reverbera-
Control tions display
Predelay
control
Diffusion
Decay Time control
control
Figure 134. RealVerb Pro Timing panel
1. Drag the Amplitude control for the early reflections up or down (from
–80 dB to 0 dB) to affect the energy of the reflections. The Amplitude value
is indicated in the text field at the bottom of the Timing panel.
2. Drag the Predelay control for the early reflections left or right (from
1–300 milliseconds) to affect the delay between the dry signal and the on-
set of early reflections. The Pre-delay time is indicated in the text field at the
bottom of the Timing panel.
Note: The length in time of the early reflections cannot be adjusted from the
Timing panel, and instead is determined by the reverb’s shape and size (see
Figure 131).
Positioning
One of the unique features of RealVerb Pro is the ability to separately position
the direct path, early reflections, and late-field reverberation. The Position
panel (see Figure 135) provides panning controls for each of these reverb
components. In addition, a proprietary Distance control adjusts perceived
source distance. These controls allow realistic synthesis of acoustic spaces—
for instance listening at the entrance of an alley way, where all response com-
ponents arrive from the same direction, or listening in the same alley next to
the source, where the early reflections and reverberation surround the lis-
tener.
Note: The Direct, Early, and Late controls are unavailable in mono-in/mono-
out configurations.
1. Drag the Direct slider left or right. A value of <100 pans the signal hard
left; a value of 100> pans the signal hard right. A value of <0> places the
signal in the center of the stereo field.
Set the positioning for the early reflection or late-field reverberation with any of the
following methods:
1. Drag the left and right slider handles to adjust the stereo width. The length
of the blue slider is adjusted. For a full stereo signal, drag the left handle all
the way to left, and right handle all the way to the right.
2. Drag the blue center of the slider left or right to set the positioning of the sig-
nal. If you drag all the way to the left or right, the stereo width is adjusted.
For a mono signal panned hard left or right, drag the slider all the way to
the left or right.
Distance RealVerb Pro allows you to control the distance of the perceived source with
the Distance control in the Positioning panel (see Figure 135). In reverberant
environments, sounds originating close to the listener have a different mix of
direct and reflected energy than those originating further from the listener.
1. Drag the Distance slider to the desired percentage value. Larger percent-
ages yield a source that is further away from the listener. A value of 0%
places the source as close as possible to the listener.
Wet/Dry Mix The wet and dry mix of the reverb is controlled from the Mix slider in the Po-
sitioning panel (see Figure 135). The two buttons above this slider labeled “D”
and “W” represent Dry and Wet; clicking either will create a 100% dry or
100% wet mix.
Morphing
All RealVerb Pro controls vary continuously using proprietary technology to
smoothly transition between selected values. This capability enables RealVerb
Pro to morph among presets by transitioning between their parameter sets.
This approach is in contrast to the traditional method of morphing by cross-
fading between the output of two static reverberators. The method employed
by RealVerb Pro produces more faithful, physically meaningful intermediate
states.
Figure 137 depicts the Morphing Panel. Click the Morphing Mode button to
enable Morphing mode. When RealVerb Pro is in morphing mode, the other
RealVerb Pro spectral controls are grayed out and cannot be edited. In mor-
phing mode, two presets are selected using the pull-down menus. Once the
desired presets are selected in the pull-down menus, the morphing slider is
used to morph from one preset to the other.
On an insert effect, the Mix will change back and forth between the two mix
values of each preset.
Factory Presets In the preset menu there are thirty factory presets that can be changed by the
user. Any modification to a preset will be saved even if you change presets.
If you want to return all the presets to their default settings, select “Reset all to
Defaults” at the bottom of the presets menu.
Edits to any and all presets in the list are maintained separately within each
instance of a plug-in within a session.
Using Host Most host applications include their own method of managing plug-in presets.
Application
Management For example, the currently selected preset is saved in Cubase/Nuendo when
“Save Effect” is used. Morphing parameters and the solo/mute buttons (wet,
dry, input) are not saved.
All presets and programs are saved in Cubase/Nuendo when “Save Bank”
is used. They are also saved in the session file for each instance of the plug-in.
Editing the name in Cubase/Nuendo modifies the current preset's name. The
new name will appear in all preset select lists, and will be saved with the ses-
sion, bank or effect.
Overview
The Boss CE-1 Chorus Ensemble is another classic effect faithfully reproduced
by our ace modeling engineers. The CE-1 is considered by many to the defin-
itive chorus effect, renowned for its rich and unique timbres.
Even for the mix engineer, stomp boxes can provide “secret weapon effects”
not found any other way. In 1976, BOSS originated the chorus effect pedal,
and nobody has come close to matching the CE-1’s captivating chorus sound
since then. Its unmistakable warm analog stereo chorus and vibrato have
been heard on countless tracks; particularly on guitars, bass and electric
keys. Universal Audio has been commissioned by Roland to accurately model
the CE-1, and the results are nothing short of spectacular.
UAD Powered Plug-Ins Manual - 446 - Chapter 45: Boss CE-1 Chorus Ensemble
Boss CE-1 Controls
The Boss CE-1 has two operating modes, chorus and vibrato. Only one mode
can be active at a time. The operating mode is set using the Vibrato/Chorus
switch.
Clip LED The red Clip LED illuminates when signal peaks in the plug-in occur.
The active state is black text. The inactive state has gray text.
The default state is effect.
This is not a plug-in bypass switch. The hardware CE-1 has a slight affect on
the sound even when the effect is “bypassed” in normal mode. We have mod-
eled the plug-in faithfully and like the hardware unit, when the effect is by-
passed with this switch, audio is still processed to sound like the CE-1 in “nor-
mal” mode. To disable audio processing, use the CE-1 Power Switch.
Rate LED The yellow Rate LED blinks according to the current low-frequency os-
cillator (LFO) rate. When CE-1 is in Vibrato mode, the LFO rate is de-
termined by the vibrato rate knob. When in Chorus mode, this LED is
affected by the Intensity knob.
Note: In Chorus mode, the fastest LFO rate is slower than the slowest LFO rate
in Vibrato mode.
Vibrato/Chorus This switch determines the operating mode of the plug-in. Click
Switch to switch between chorus and vibrato modes.
The active mode is black text. The inactive mode has gray text.
The default mode is chorus.
Stereo Mode The Stereo Mode switch determines the operating mode of CE-1 when the
Switch plug-in is used in a stereo or mono-to-stereo configuration, such as a stereo au-
dio track insert or stereo effects bus.
UAD Powered Plug-Ins Manual - 447 - Chapter 45: Boss CE-1 Chorus Ensemble
The hardware CE-1 has only a monophonic input. Its output can be mono (wet
and dry signal mixed at one output jack) or stereo (dry signal in one output
jack, wet signal in other output jack). We’ve adapted the model for the mod-
ern era, enabling a true stereo input.
Dual Mode
In Dual mode the CE-1 behaves as a dual-mono device, functioning as two in-
dependent CE-1’s, each running in mono mode on one side of the stereo sig-
nal.
The left output contains a mix of the dry left input signal and the processed left
channel signal, while the right output contains a mix of the dry right input sig-
nal and the processed right channel signal. Additionally, the LFO’s of the dual
CE-1 channels are 90 degrees out of phase (quadrature) for maximum effect.
Classic Mode
Output Level This knob determines the signal level at the output of the plug-
Knob in. The range is 0 – 100%.
Chorus Intensity When CE-1 is in chorus mode, the amount of chorusing effect is
Knob determined by this knob.
UAD Powered Plug-Ins Manual - 448 - Chapter 45: Boss CE-1 Chorus Ensemble
Vibrato Controls These two knobs control rate and depth of the vibrato
effect when CE-1 is in vibrato mode.
Depth Knob
Rate Knob
The rate knob controls the rate of the vibrato LFO. The rate is indicated by the
the Rate LED indicator.
Power Switch This switch determines whether the plug-in is active. This is useful for
comparing the processed settings to the original signal, or to bypass
the plug-in to reduce the UAD DSP load (load is not reduced if DSP
LoadLock is enabled).
UAD Powered Plug-Ins Manual - 449 - Chapter 45: Boss CE-1 Chorus Ensemble
CHAPTER 46
Roland Dimension D
Overview
The Roland SDD-320 Dimension D is another classic effect faithfully repro-
duced by our ace modeling engineers. The Dimension D is a one of a kind stu-
dio gem that adheres to the principle of doing one thing, and doing it ex-
tremely well. Its one and only function: some of the best sounding stereo
chorus ever made. However, the Dimension D is more than a chorus, it is re-
ally a unique sound enhancer for adding spatial effects to mono or stereo
sources. The Dimension D does not create a dramatically new sound, but en-
hances the characteristics of any voice or instrument, and gives a new “di-
mension” without the apparent movement of sound produced by other chorus
devices. The strength of the Dimension D is in its subtlety.
This classic 1979 Roland device has been heard on countless records, from
luminaries such as Peter Gabriel, Talking Heads and INXS. Entrusted by the
Roland company to emulate this classic studio tool, Universal Audio went to
great lengths to preserve this Bucket Brigade chorus with all its unique design
elements and sonic characteristics. With only four pushbutton ‘dimension’ set-
tings, the Dimension D is the ultimate in functional simplicity.
Multiple Buttons True to the original hardware, multiple Dimension Mode buttons can be en-
gaged simultaneously for subtle sonic variations of the four main modes. To
engage multiple Dimension Mode buttons, press the Shift key on the computer
keyboard while clicking the Mode buttons.
Input Mode The original Roland Dimension D has an input switch on the back
Switch that puts the unit into mono-in/stereo-out mode. We have included
this function and moved the switch “to the front” for your processing
convenience.
The default position (in) is stereo mode. Click the pushbutton switch (out) to en-
able Mono mode.
Power Switch This switch determines whether the plug-in is active. This is useful
for comparing the processed settings to the original signal, or to
bypass the plug-in to reduce the UAD DSP load (load is not re-
duced if UAD-2 DSP LoadLock is enabled). Click the pushbutton
switch to change the Power state.
Power LED The Power LED is illuminated when the plug-in is active.
Output Level This LED-style meter indicates the level of the signal at the output
of the plug-in.
When the Dimension Mode is OFF but the Power switch is ON,
audio is not processed but the Output Level meter is still active.
Overview
In 1973, Roland created the Space Echo system that utilized multiple play
heads to create warm, highly adjustable echo effects, which added wonder-
ful tape character and chaos to performances and recordings. The Space
Echo can be heard on numerous recordings, from 70’s space rock like Pink
Floyd and David Bowie, to countless Reggae and Dub albums, to more recent
bands like Portishead and Radiohead. Universal Audio has been entrusted by
Roland to re-create the highly beloved RE-201 unit, considered the best of the
Space Echo line. Our team spent over a year developing our RE-201 Space
Echo, which truly captures the physical behavior of this complex device
“warts and all”, down to the distortion, wow and flutter, pitch shifting, and
warmth that tape based delays are famous for; but our plug-in goes even fur-
ther, capturing the complex self-oscillation that makes the Space Echo more
than an effect, but a unique instrument unto itself.
UA’s RE-201 Space Echo faithfully retains all the controls and features of the
original, such as the Mode Selector for various head combinations, Repeat
Rate for fine timing control, and Intensity which sets repeat count and allows
the unit to achieve self-oscillation. The all-important Echo/Normal “Dub”
switch is retained for muting, as well as the simple tone controls. Last but cer-
tainly not least, the atmospheric shimmer of the Space Echo’s spring reverb is
faithfully captured, putting this fantastic plug-in on par with the original unit as
a tool of infinite creativity.
UAD Powered Plug-Ins Manual - 452 - Chapter 47: Roland RE-201 Space Echo
Roland RE-201 Screenshot
The original mic and instrument volume controls have been replaced with
echo/reverb pan controls and an input control. We’ve also added a “Tape
Age” switch to emulate new and older tape, a Wet Solo control for use as a
bus/send effect, and an output volume control for utility. The clever “Splice”
switch allows the user to trigger the tape splice at will.
Peak Level The Peak lamp indicates when transient signal peaks and clipping are
detected just after the input volume control. It begins illuminating at ap-
proximately –2 dB to –1.5 dB, then gets brighter as the level in-
creases.
UAD Powered Plug-Ins Manual - 453 - Chapter 47: Roland RE-201 Space Echo
The VU is essentially an input meter, therefore it doesn’t react when the
Echo/Normal switch is switched from Echo to Normal.
Note: The Peak lamp and VU meter measure signal just after the input volume
control. However, like the original hardware, echo intensity (feedback) is ap-
plied just before the level detection circuit. For this reason, the Intensity control
will affect the level readings.
Echo Pan Echo Pan determines the placement of the echo signal in the ste-
reo panorama when the plug-in is used in mono-in/stereo-out
and stereo-in/stereo-out configurations. When the RE-201 is
used in a mono-in/mono-out configuration, this control is dis-
abled.
Reverb Pan Reverb Pan determines the placement of the reverb signal in the
stereo panorama when the plug-in is used in mono-in/stereo-out
and stereo-in/stereo-out configurations. When the RE-201 is
used in a mono-in/mono-out configuration, this control is dis-
abled.
Input Volume This control determines the signal level that is input to the plug-in.
Unity gain is at the 12 o’clock position.
Note: The RE-201 uses less UAD DSP in reverb-only or echo-only modes versus
when both modes are used simultaneously.
UAD Powered Plug-Ins Manual - 454 - Chapter 47: Roland RE-201 Space Echo
The affect of each knob position is detailed in Table 34 on page 455.
Bass This knob controls the low frequency response in the tape echo
portion of the signal. It does not affect the dry signal or the re-
verb signal. This is a cut/boost control; it has no effect when in
the 12 o’clock (straight up) position.
Treble This knob controls the high frequency response in the tape echo
portion of the signal. It does not affect the dry signal or the re-
verb signal. This is a cut/boost control; it has no effect when in
the 12 o’clock (straight up) position.
Reverb Volume This control determines the volume of the spring reverb effect.
Rotate the control clockwise for more reverb. Reducing the con-
trol to its minimum value will disable the reverb.
Note: Reverb Volume has no affect when the Mode Selector is in positions
1through 4.
Output Volume This control determines the output volume of the plug-in. It affects
the dry and effect signals.
UAD Powered Plug-Ins Manual - 455 - Chapter 47: Roland RE-201 Space Echo
Repeat Rate This knob controls the time interval of the echo effect. Rotating
the control clockwise will decrease the delay time, and counter-
clockwise rotation will increase the delay time.
The head times available with this control are dependent upon the “Mode Se-
lector” on page 454. As with the original hardware, this control varies the
tape playback speed in realtime by manipulating the tape capstan motor and
therefore has a musically useful “ramp-up” and “ramp-down” effect.
When Tempo Sync is enabled, this control is quantized to allow only rhythmic
notes available at the leading head.
Intensity This knob controls the repeat level (feedback) of the echo signal.
Rotating the control clockwise increases the number of echoes.
Higher values will cause self-oscillation; the exact position is
program and Mode dependent.
The self-oscillation of the RE-201 is one of the magic features that really makes
it more than a mixing tool; it’s also an instrument to be played. The effect may
be used subtly, sending the unit into gentle oscillation on held notes, or can
be put into “over the top” oscillation with extreme intensity settings. Different
Modes will reveal different qualities of oscillation. Single head Modes tend to
have simpler oscillation qualities, while multiple head modes will have a more
complex sound when oscillating.
The RE-201’s oscillation qualities are heavily program and control depen-
dent. Different sources of audio, gain, tone, repeat rate, and tape settings will
all effect “oscillation performance.” The RE-201 can also achieve oscillation
with no signal, making the RE-201 a truly unique instrument.
Echo Volume This control determines the volume of the echo effect. Ro-
tate the control clockwise for louder echo. Reducing the
control to its minimum value will disable the echo.
UAD Powered Plug-Ins Manual - 456 - Chapter 47: Roland RE-201 Space Echo
Note:Echo Volume has no affect when the Mode Selector is in the “Reverb
Only” position.
Power Switch This switch determines whether the plug-in is active. This is use-
ful for comparing the processed settings to the original signal,
or to bypass the plug-in to reduce the UAD DSP load. Toggle
the switch to change the Power state.
Toggling the power switch will also clear the tape echo. This can be useful if
the RE-201 is self-oscillating and restarting the feedback loop is desired.
Echo/Normal This switch disables the signal sent into the echo portion of the
processor when set to NORMAL. The switch will have no effect
if “Mode Selector” on page 454 is set to “Reverb Only.” This control is some-
times affectionately referred to as the “dub” switch.
Sync This switch puts the plug-in into tempo sync mode. See Chapter 8
“Tempo Sync” in the UAD System Manual for more information.
The delay time values are displayed in milliseconds unless tempo sync is ac-
tive, in which case beat values are displayed. When a particular head is in-
active (see “Mode Selector” on page 454), a dash is displayed.
When in tempo sync mode, note values that are out of range will flash. Im-
precise note values due to head relationships are displayed with superscript
+ or – symbol before the note.
Tape Age In the original hardware, the tape loop is contained in a user-re-
placeable cartridge. As the tape wears out, it is subject to fidelity
loss plus increased wow and flutter. The Tape Age switch allows
the plug-in to mimic the behavior of new, used, and old tape car-
tridges.
Newer tape may be ideal for a pristine vocal track, while older tape could be
described as having more “character” and might be more appropriate for
sources where greater chaos may be musical.
UAD Powered Plug-Ins Manual - 457 - Chapter 47: Roland RE-201 Space Echo
Splice Normally, the splice on the tape loop comes around at regular in-
tervals. This interval varies, and is determined by the selected Re-
peat Rate. Depending on what Tape Quality is selected, the splice
can be subtle or obvious, and can work as a catalyst for chaos es-
pecially when the RE-201 is in a state of self-oscillation.
This switch resets the location of the tape “splice” when the switch is actuated.
It is a momentary switch that pops back into the off position immediately after
it is activated, allowing the user to trigger the splice point at will.
Note that the splice effect isn't immediate. It drops the splice at the write head,
and it needs time to go over the read heads (at which point there will be a
dropout), and then the tape capstan (where it will create some wow and flut-
ter).
Wet Solo When this switch is OFF, the dry/unprocessed signal is mixed
with the wet/processed signal. When set to ON, only the pro-
cessed signal is heard.
Wet Solo is useful when the plug-in is placed on an effect group/bus that is
configured for use with channel sends. When the plug-in is used on a channel
insert, this control should generally be OFF.
Caution :-D lf the RE-201 generates noise after installation, changing the location or po-
sition is indicated to correct the situation. Avoid prolonged use in dusty, hot
or high humidity places.
Roland® and RE-201 Space Echo® are registered trademarks of Roland Corporation, Japan and
are used under license. Portions of this RE-201 manual section is ©copyright Roland Corporation,
Japan and are used under license with kind permission from Roland.
UAD Powered Plug-Ins Manual - 458 - Chapter 47: Roland RE-201 Space Echo
CHAPTER 48
You can shorten or lengthen the attack and sustain of percussive signals such
as kick drum, snare or toms, easily take the bleed from open mics, or expand
the room sound of overheads. The Transient Designer’s magic can be applied
to virtually any other signal as well: Amplify or reduce the picking sound of an
acoustic guitar, hold the sound of strings longer, or reduce the reverb time of
a choir.
UAD Powered Plug-Ins Manual - 459 - Chapter 48: SPL Transient Designer
SPL Transient Designer Controls
Containing only two primary controls, the UAD SPL Transient Designer is ex-
tremely simple to operate. The technology behind the processor isn't as im-
portant as how it sounds. However, for those who desire a deeper under-
standing of the process, a deeper explanation of the underlying technology is
presented at the end of this chapter (see “Technology” on page 466).
For more information, see “The ATTACK Control Circuitry” on page 466)
For more information, see “The SUSTAIN Control Circuitry” on page 468.
Gain Gain controls the signal level that is output from the plug-in.
The available range is from –20 dB to +6 dB. The default
value is 0 dB.
UAD Powered Plug-Ins Manual - 460 - Chapter 48: SPL Transient Designer
Signal This 4-stage “LED” indicates the presence of audio signals at the
input of the plug-in. When the input signal is below –25 dB, the
indicator is off. At –25 dB to –19 dB, the indicator glows slightly.
At –18 dB to –10 dB, it lights with medium intensity. At –9 dB to
0 dB, it shines brightly.
Overload The Overload “LED” illuminates when the signal level at the out-
put of the plug-in reaches 0 dBFS. The indicator matches the be-
havior of the original hardware unit. However, in the software
plug-in version, the output can be “overloaded” without causing
distortion.
Note: Link is an indicator only; it does not control any plug-in parameter.
On/Power The On and Power switches determine whether the plug-in is ac-
tive. Click the On or Power switches to change the state. On and
Power illuminate when the plug-in is active.
Note: The On and Power switches perform the exact same function.
UAD Powered Plug-Ins Manual - 461 - Chapter 48: SPL Transient Designer
Acknowledgement
In addition to creating an amazing piece of hardware, Sound Performance
Lab also wrote an extensive user manual for the Transient Designer. Because
Universal Audio has full license to make use of the Transient Designer technol-
ogy, SPL has graciously authorized us to use their documentation as well.
The remainder of this chapter is excerpted from the SPL Transient Designer
(RackPack) User Manual, and is used with kind permission from SPL. All copy-
rights are retained by SPL.
Applications
The SPL Transient Designer is ideally suited for use in professional recording,
in project or home studios and sound reinforcement applications.
For the first time you can manipulate and control the attack and sustain char-
acteristics of a signal regardless of level in the most intuitive and simple way.
Usually equalizers are used to separate instruments in a mix – the tonal aspect
of the signal is considered, but not the temporal aspect.
During a remix or in general after micing you can arrange new positions of
instruments. Reduce ATTACK and increase SUSTAIN to move signals back
into the mix that are too present. Additionally the FX parts of too dry signals
are strengthened.
The following examples are given as suggestions and examples. The de-
scribed procedures with specific instruments can of course be transferred to
others that are not mentioned here.
Drums & Processing drum and percussion sounds is probably the Transient Designer’s
Percussions most typical range of application; both from samples to live drum sets
• Emphasize the attack of a kick drum or a loop to increase the power and
presence in the mix.
UAD Powered Plug-Ins Manual - 462 - Chapter 48: SPL Transient Designer
• Shorten the sustain period of a snare or a reverb tail in a very musical way
to obtain more transparency in the mix.
• When recording a live drum set, shorten the toms or overheads without
physically damping them. Usual efforts to damp and mike are reduced re-
markably. Since muffling of any drum also changes the dynamic response,
the Transient Designer opens up a whole new soundscape.
• Micing live drums is considerably faster and easier because you can correct
the apparent “distance” of the microphone by simply varying the ATTACK
and SUSTAIN values.
• The Transient Designer is a perfect alternative to noise gates in live drum
micing. Adaptively reacting to the duration of the original signal, the sustain
is shortened more musically than with fixed release times and a drumset is
freed from any crosstalk quickly and effectively.
• Create unusual dynamic effects including new and interesting pan effects.
For example, patch a mono loop through two channels of the Transient De-
signer and pan fully left and right in the mix. Process the left channel with
increased ATTACK and reduced SUSTAIN while you adjust the right chan-
nel the opposite way and you get very special stereo loop sounds. You have
to try this to appreciate what it sounds like, but expect to hear a lot of un-
usual stereo movement.
• Enjoy an amazingly simple integration of drum sounds into a mix. If the
acoustic level of a snare is expanded to approximately +4 dB by increasing
the attack value, the effective increase of peak levels in the overall mix is
merely about 0.5 dB to 1 dB.
Drums: If your drums happen to sound as if the room mics have been placed in a shoe
Ambience closet, the Transient Designer can immediately turn that sound into the ambi-
ence of an empty warehouse. Just send the stereo room mics through the Tran-
sient Designer and crank the ATTACK control to emphasize the first wave.
UAD Powered Plug-Ins Manual - 463 - Chapter 48: SPL Transient Designer
Guitars Use the Transient Designer on guitars to soften the sound by lowering the AT-
TACK. Increase ATTACK for in-the-face sounds, which is very useful and
works particularly well for picking guitars. Or blow life and juice into quietly
played guitar parts.
Distorted guitars usually are very compressed, thus not very dynamic. Simply
increase the ATTACK to get a clearer sound with more precision and better in-
tonation despite any distortion.
Heavy distortion also leads to very long sustain. The sound tends to become
mushy; simply reduce SUSTAIN to change that. If you, how- ever, want to cre-
ate soaring guitar solos that would make even David Gilmour blush, just
crank up the SUSTAIN control to the max and there you go.
With miced acoustic guitars you can emphasize the room sound by turning up
SUSTAIN. If you want the guitars to sound more intimate and with less ambi-
ence, simply reduce SUSTAIN.
Bass: Staccato Speaking of bass: Imagine a too sluggishly played bass track... you may not
vs. Legato have to re-record it: Reduce the SUSTAIN until you can hear clear gaps be-
tween the downbeats—the legato will turn into a nice staccato, driving the
rhythm-section forward.
The Re- Always and everywhere the same reverb presets – boring, aren‘t they? Try
Invention Of sending the output of your reverb through the Transient Designer. Now crank
Reverb
the ATTACK control to the max and reduce SUSTAIN to a bare minimum. The
intensity of the reverb is now much higher in the beginning while the reverb
time is reduced.
You can also create a reverb effect that moves from one channel to the other.
Reverb presets with a long decay or a long pre-delay and especially those
that have flamboyant reflections set to appear after the beginning of the dif-
fuse reverberation tail are predestined for that. Insert the left and the right
UAD Powered Plug-Ins Manual - 464 - Chapter 48: SPL Transient Designer
channels of the reverb return through two separate Transient Designer in-
stances. Turn the ATTACK fully right on one instance and reduce SUSTAIN
slightly (about –1.5 dB). On the other instance turn the ATTACK fully left and
the SUSTAIN to the 3-o‘clock position (about +12 dB).
These settings preserve the original complexity of the reflections in the reverb
but the maximum intensity of the effect will move from the left to the right in the
mix while the reverb will maintain it‘s presence in both channels. You can
make this effect even more dramatic by setting all controls to their most ex-
treme positions, but you run the danger of ending up with a lopsided effect
that appears out of balance.
Backings A common problem especially with tracks that are recorded and mixed in dif-
ferent studios: Backings lack of ambience, and finding a reverb that
“matches” takes time... so simply emphasize the original ambience by turning
up the Transient Designer’s SUSTAIN control.
And the opposite problem, too much ambience, is similarly simply solved with
the opposite processing —just reduce SUSTAIN.
Keyboards & Sounds in keyboards and samples are usually highly compressed and main-
Sampler tain only little of natural dynamics. Increase the ATTACK values to re-gain a
more natural response characteristic. The sounds occupy less space in the mix
and appear more identifiable even at lower volumes.
Post Production When dealing with overdubs in movies you can easily add more punch and
definition to effect sounds from any sample library.
The same applies to outdoor recordings that suffer from poor microphone po-
sitioning—simply optimize them afterwards.
Mastering Like with any good thing, you also have to know where not to use it. For ex-
ample, using a Transient Designer in mastering is not recommended, as it is
rarely a good idea to treat a whole mix at once. Instead, treat individual ele-
ments within the mix.
UAD Powered Plug-Ins Manual - 465 - Chapter 48: SPL Transient Designer
Technology
Of course you don‘t have to know how the Transient Designer works in order
to use it. However, since it offers a completely novel signal processing, noth-
ing shall be concealed from the more curious users.
The ATTACK The ATTACK control circuitry uses two envelope generators. The first one gen-
Control Circuitry erates a voltage (Env 1) that follows the original waveform. The second enve-
lope generator creates the envelope Env 2 with a slower attack envelope.
Figure 143 on page 466 illustrates the original curve and the two created en-
velopes that control the ATTACK processing. Envelope generator Env 1 fol-
lows the original waveform. Env 2 is generated with reduced attack.
UAD Powered Plug-Ins Manual - 466 - Chapter 48: SPL Transient Designer
Figure 144 on page 467 shows the difference between Env 1 and Env 2 that
defines the control voltage of the VCA. The shaded area marks the difference
between Env 1 and Env 2 that controls the control voltage of the VCA. The am-
plitude of the attack is increased if positive ATTACK values are set. Negative
ATTACK values reduce the level of the attack transient.
Figure 145 on page 467 displays the processed waveforms with maximum
and minimal ATTACK to compare against the original waveform in diagram
1.
UAD Powered Plug-Ins Manual - 467 - Chapter 48: SPL Transient Designer
The SUSTAIN The SUSTAIN control circuitry also plays host to two envelope generators. The
Control Circuitry envelope tracker Env 3 again follows the original waveform. The envelope
generator Env 4 maintains the level of the sustain on the peak-level over a
longer period of time. The control voltage of the VCA is again derived from
the difference between the two voltages. Sustain amplitude is increased for
positive SUSTAIN settings and reduced for negative settings.
Figure 146 on page 468 illustrates the original waveform and the envelope
creation to control the SUSTAIN processing. Envelope generator Env 1 fol-
lows the original waveform, Env 2 is generated with prolonged sustain.
Figure 147 on page 468 shows the difference between Env 4 and Env 3 that
defines the control voltage of the VCA.
UAD Powered Plug-Ins Manual - 468 - Chapter 48: SPL Transient Designer
Figure 148 on page 469 displays the processed waveforms with maximum
and minimal sustain to compare against the original waveform in diagram 4.
SPL Sound Performance Lab® and Transient Designer® are registered trademarks of SPL Elec-
tronics, GmbH Germany and are used under license. Portions of this SPL Transient Designer man-
ual section is ©copyright SPL Electronics GmbH Germany and are used under license with kind
permission from SPL.
UAD Powered Plug-Ins Manual - 469 - Chapter 48: SPL Transient Designer
CHAPTER 49
The SSL E Series Channel Strip plug-in allows UAD-2 users on Mac and PC to
apply classic SSL 4000 EQ curves and dynamics control to their music. This
unique plug-in is distinguished by its remarkably authentic sound, and its in-
clusion of both the Type E “black knob” and “brown knob” four-band EQ and
filters, long considered favorites in SSL lineage. Other features include high
and low cut filters, independent Expander/Gate, and bespoke Compres-
sor/Limiter.
The E Series’ middle EQ bands are fully parametric, while the high and low
bands provide the user with switchable bell or shelving filters. The Comp/Lim-
iter provides Threshold, fast or slow Attack time, a 0.1 to 4 second Release,
and a continuously variable Ratio control. The Exp/Gate offers Threshold,
fast or slow Attack time, a 0.1 to 4 second Release time, and a Range control
to tailor the Gate or Expansion effect. In addition, the SSL E Series Channel
Strip plug-in adds a second Gate setting, featuring a “no-chatter” circuit bor-
rowed from later SSL designs.
For increased flexibility, a PRE-DYN button allows users to reorder the signal
chain, placing the EQ before the dynamics section. With the DYN-SC button,
users may engage a sidechain feature, providing frequency-dependent com-
pression using the EQ filters, cut filters, or both. Lastly, a Link button adds the
ability to link or unlink the sidechain when using the stereo version of the
plug-in.
Taken together, these features make the SSL E Series plug-in for UAD-2 among
the most flexible and best-sounding channel strip emulations available today,
bar none.
UAD Powered Plug-Ins Manual - 470 - Chapter 49: SSL E Channel Strip
SSL E Channel Strip Screenshot
Figure 149. The UAD SSL E and 4K Channel Strip plug-in windows
Note that knob settings, when compared to the graphical user interface silk-
screen numbers, may not match the actual parameter values. This behavior is
identical to the original hardware, which we modeled exactly. When the
plug-in is viewed in parameter list mode (Controls View), the actual parameter
values are displayed.
Note: SSL consoles adopt a different pan law than what the host application
may be set to by default. Most DAW's allow configuring the panning spread
preference to match various consoles. In the event you want to capture
SSL-style stereo response when using multiple instantiations of the SSL E Chan-
nel Strip, set the pan law preference in the host to a value of –4.5 dB.
UAD Powered Plug-Ins Manual - 471 - Chapter 49: SSL E Channel Strip
Filters
In addition to the four-band EQ, UAD SSL E
Channel Strip offers individual high and low
pass filters.
High Pass
The left knob determines the cutoff frequency for the high pass filter. Rotate
clockwise to reduce low frequencies.
In Black mode, the slope of the high pass filter is 18 dB per octave and the
available range is 16 Hz to 350 Hz. In Brown mode, the slope of the high
pass filter is 12 dB per octave and the available range is 20Hz to 350 Hz.
Low Pass The right knob determines the cutoff frequency for the low pass filter. Rotate
clockwise to reduce high frequencies.
In Black mode the slope of the low pass filter is 12 dB per octave and the
available range is 22 kHz to 3 kHz. In Brown mode the slope of the low pass
filter is 12 dB per octave and the available range is 16 kHz to 3 kHz.
Filters to This button enables the Filters sidechain function. When the Filters sidechain
Sidechain is active, signal output from the Filters module is removed from the audio path
(DYN SC)
and is instead routed to control (“key”) the dynamics module.
Note: The Filters module must be active (not at minimum value) in conjunction
with the Filters DYN SC button for the Filters sidechain to function. An addi-
tional dynamics sidechain is available in the EQ section (“EQ to Sidechain
(DYN SC)” on page 480).
UAD Powered Plug-Ins Manual - 472 - Chapter 49: SSL E Channel Strip
Dynamics
Separate “soft-knee” compressor/limiter and expansion/gate modules are
available in the dynamics section. Each module has their own set of controls.
Compressor/Limiter
This prevents transients which appear only on one channel from shifting the
stereo image of the output. Any big transient on either channel will cause both
channels to compress.
Link is active when the button LED is illuminated. When the plug-in is used in
a mono-input configuration, Link has no affect.
Note: Signals must exceed the Threshold value before they are attenuated by
the Ratio amount.
Compress Threshold defines the signal level at which the onset of com-
Threshold pression occurs. Incoming signals that exceed this level are
compressed. Signals below the level are unaffected.
UAD Powered Plug-Ins Manual - 473 - Chapter 49: SSL E Channel Strip
This compressor has an automatic make-up gain function. As Threshold is low-
ered and compression increases (as knob is rotated clockwise), output gain
from the module is increased automatically to compensate.
Compress Release sets the amount of time it takes for gain reduction to
Release cease once the input signal drops below the threshold level.
Longer release times can smooth the transition that occurs
when the signal dips below the threshold, which is especially
useful for material with frequent peaks. However, if you set the
Release time too long, the gain reduction imposed by loud sec-
tions of audio may initially reduce the level of subsequent sections of audio
with lower signals.
Available Release times are continuously variable between 0.1 seconds and
4 seconds.
Compress Attack Attack defines the duration between the input signal reaching the thresh-
old and processing being applied by the compressor. Attack time is nor-
mally 30 milliseconds (“slow” mode in Controls View). When Fast Attack
is enabled, attack time is 3 milliseconds.
Fast Attack is active when the “F.ATK” LED (4K: “F.ATT”) is illuminated. To
toggle Fast Attack, click the LED or its label text.
Gate/Expander
The gate/expander module operates in either gate or expansion mode, as
determined by the Dynamics Select button. Two attack speeds and a continu-
ously variable release time are available in both modes.
Dynamics Select The Select button cycles through the three modes available in the
gate/expander module: Expand, Gate 1, and Gate 2.
Expand (EX)
In Expand mode, the module applies downwards expansion at a fixed 1:2 ra-
tio, with the amount of gain reduction determined by the Range control (“Ex-
pand Range” on page 475).
UAD Powered Plug-Ins Manual - 474 - Chapter 49: SSL E Channel Strip
Gate 1 (G1)
In Gate 1 mode, signals below the Expand Threshold are attenuated by the
Expand Range amount. Gate 1 is authentic to the gate mode on earlier hard-
ware consoles.
Gate 2 (G2)
Gate 2 mode operates the same way as Gate 1, but has a different “no-chat-
ter” response characteristic that is derived from later versions of the hard-
ware.
In typical use it’s best to set the threshold value to just above
the noise floor of the desired signal (so the noise doesn’t pass when the de-
sired signal is not present), but below the desired signal level (so the signal
passes when present).
Expand Range Range (depth) controls the difference in gain between the
gated/expanded and non-gated/expanded signal. Higher
values increase the attenuation of signals below the threshold.
When set to zero, no gating or expansion occurs. Range is
continuously variable from 0 dB to –40 dB.
Expand Release Release sets the amount of time it takes for gate/expander pro-
cessing to engage once the input signal drops below the
Threshold value. The available range is 0.1ms to 4 seconds.
Note: Fast release times are typically only suitable for certain types of per-
cussion and other instruments with very fast decays. Using fast settings on
other sources may produce undesirable results.
UAD Powered Plug-Ins Manual - 475 - Chapter 49: SSL E Channel Strip
Expand Attack Attack defines the duration between the input signal reaching the thresh-
old and processing being applied by the expander/gate. Attack time is
normally auto-sensing and program dependent. When Fast Attack is en-
abled, attack time is 1ms.
Fast Attack is active when the “F.ATK” LED (4K: “F.ATT”) is illuminated. To
toggle Fast Attack, click the LED or its label text.
Dynamics Enable These three buttons determine the status of the dynamics
processors.
DYN IN is useful for quickly comparing the original signal dynamics to the dy-
namically processed signal.
The EXP IN button enables the expander/gate module. The module is enabled
when the EXP IN LED is illuminated. This button has no effect when DYN IN
is disabled.
The CMP IN button enables the compressor/limiter module. The module is en-
abled when the CMP IN LED is illuminated. This button has no effect when
DYN IN is disabled.
Dynamics The Expansion Meter uses green LED's (left column) to display the
Meters amount of downward expansion occurring in the expander/gate
module. Higher values indicate more gain reduction.
UAD Powered Plug-Ins Manual - 476 - Chapter 49: SSL E Channel Strip
EQ
The UAD SSL E Channel Strip EQ module is divided into four frequency
bands: High Frequency (HF, blue knobs), High Midrange Frequency (HMF,
green knobs), Low Midrange Frequency (LMF, yellow knobs), and Low Fre-
quency (LF, orange knobs). The high and low bands can be switched from
shelving mode into bell (peak/dip) mode. The two midrange bands are fully
parametric. The EQ module can be disabled altogether or routed for dynam-
ics sidechain keying.
EQ Type Two different types of SSL EQ are available. The EQ Type but-
ton selects between the two types, either Black or Brown. The
knob color of the LF band controls changes to reflect the cur-
rent setting.
EQ Type Background
The original E series equaliser section was the ‘Brown Knob’ circuit. This was
standard on all early production E Series consoles. The two parametric
mid-band sections feature a classic logarithmically symmetric design that en-
sures that the ±3 dB up/down points retain the same musical interval from the
centre frequency regardless of frequency and amplitude settings. The two
shelving sections are traditional 6 dB/octave designs with an option for a
fixed Q parametric response (Bell). The ‘02’ EQ, to give it its correct name
(the last two digits of the card’s part number), was used on countless record-
ings and mixes in the early eighties.
In 1983 a new ‘242’ EQ circuit was developed in conjunction with the leg-
endary George Martin for the first SSL console to be installed in AIR studios.
The ‘Black Knob’ EQ, as it became known, featured enhanced cut and boost
ranges (±18 dB instead of ±15 dB) together with a different control law and
a steeper 18dB/octave high pass filter for tighter control of low frequencies.
It is this design which is retained today as the ‘E-Series’ EQ option of the
X-Rack, Duality and AWS consoles.
UAD Powered Plug-Ins Manual - 477 - Chapter 49: SSL E Channel Strip
High Frequency HF Gain
(HF) Band
This control determines the amount by which the
frequency value for the band is boosted or at-
tenuated. The available range is ±15 dB in both
Black and Brown modes.
HF Frequency
HF Bell
The Bell button switches the HF band from shelf mode to peak/dip mode. In
normal (shelf) mode, only frequencies above the frequency value are boosted
or attenuated. In Bell (peak/dip) mode, frequencies above and below the fre-
quency value are boosted or attenuated.
In Black mode, the HF Bell Q is 1.3 and in Brown mode the HF Bell Q is 0.8.
HMF Frequency
UAD Powered Plug-Ins Manual - 478 - Chapter 49: SSL E Channel Strip
HMF Q
LMF Frequency
LMF Q
UAD Powered Plug-Ins Manual - 479 - Chapter 49: SSL E Channel Strip
LF Frequency
LF Bell
The Bell button switches the LF band from shelf mode to peak/dip mode. In
normal (shelf) mode, only frequencies below the frequency value are boosted
or attenuated. In Bell (peak/dip) mode, frequencies below and above the fre-
quency value are boosted or attenuated.
In Black mode, the LF Bell Q is 1.3 and the Brown mode the Bell Q is 0.8.
EQ In
This control enables the EQ sidechain function. When the EQ sidechain is ac-
tive, signal output from the EQ module is removed from the audio path and is
instead routed to control (“key”) the dynamics module. The EQ sidechain is
enabled when the LED below the button is illuminated.
Note: The EQ module must be active in conjunction with the EQ DYN SC but-
ton for the EQ sidechain to function. Note there is another dynamics
sidechain available in the Filters section (“Filters to Sidechain (DYN SC)” on
page 472).
UAD Powered Plug-Ins Manual - 480 - Chapter 49: SSL E Channel Strip
Pre-Dynamics (PRE DYN)
During “normal” operation (PRE DYN disengaged) the audio signal is output
from the dynamics module into the EQ module. Activating PRE DYN reverses
this routing, so the EQ is ahead of the dynamics module instead. Pre-dynam-
ics is active when the LED below the button is illuminated.
Global
I/O Meters The vertical LED-style metering provides a visual indication of the
signal levels at the input and output of the plug-in (the meters are
not calibrated).
The input meter is the left LED column and the output meter is the
right LED column.
Note: Each meter column represents the sum of the left and right
channels (it is not a stereo meter).
Input Input controls the signal level at the input to the plug-in. The de-
fault value is 0 dB. The available range is ±20 dB. Increasing
the input may result in more compression, depending on the
values of the Threshold and Ratio parameters.
Tip: Click the “0” to return the control knob to its center position.
Output Output controls the signal level that is output from the plug-in.
The default value is 0 dB. The available range is ±20 dB.
Tip: Click the “0” to return the control knob to its center posi-
tion.
Phase (Ø) The Phase (Ø) button inverts the polarity of the signal. The signal is
inverted when the button is depressed. Leave the button out for nor-
mal polarity.
UAD Powered Plug-Ins Manual - 481 - Chapter 49: SSL E Channel Strip
Power The Power button determines whether the plug-in is active.
Click the Power button to disable the processor. Power is useful
for comparing the processed sound to that of the original sig-
nal.
Usage Notes
The SSL E Series channel has been used to mix more hit records than any
other in history. Its no-nonsense feature and control set make it easy to get the
sound you're looking for.
A useful approach to getting to know the SSL E is to start with a fresh mix,
where little to no EQ or dynamic mixing has been done yet. Even better, start
you mix with the SSL G Bus Comp on the master fader as well, which will give
you the complete SSL sound. For an even more authentic SSL experience, ad-
just your DAW's default pan rule (usually +3) to SSL's custom +4.5 rule.
There are two four-band (LF, LMF, HMF HF) EQ options on the SSL E, known
as “brown” and “black”. It is important to note that while only the LF bass
knobs change color when switching EQ's, ALL bands are affected.
Brown is the original SSL design, with gentler Q, and smaller gain and fre-
quency ranges. It is the easier of the two to easily get a good, musical sound.
LC and HC filtering is a gentle 12 dB. Brown is the recommended starting
place for those unfamiliar with SSL. The black EQ is a later design, with the
option for narrower Q and broader gain and frequency ranges, making it
more useful for fixative EQ as sweetening. The black EQ design changes
were recommended by famed Beatles producer George Martin. Each band is
different from the brown design, plus the The LC is a steeper 18 dB per oc-
tave. The normal arrangement is dynamics first, but the EQ can be put as the
first process with the “PRE DYN” (Pre Dynamics) button.
It is interesting to note that the console labels did not change on the consoles
moving from the ±15 dB gain range to the ±18 dB of the black EQ, nor did
the frequency or Q labels.
The gain section has remained largely the same on SSL consoles from the be-
ginning until now, with dedicated VCA compressor and expand/gate cir-
cuits.
UAD Powered Plug-Ins Manual - 482 - Chapter 49: SSL E Channel Strip
The compressor's simple control set allows for a wide variety dynamics con-
trol, from transparent to aggressive. A fully continuous ratio allows for the full
range of knee from very gentle to fully limited. A fixed two position attack and
the continuously adjustable release are perfect control sets for general con-
sole dynamics control. it is interesting to note that at heavy compression with
quick release times, the SSL design has a similar room-expanding quality as
the 1176 on things like drums and room mics.
While gates are not as relevant in the DAW as they once were for analog
mixing, the SSL has one of the most transparent and musical console gates
available, which can be used for fixative or creative purposes. There are two
gate modes, G1 is the original E series gate response, with G2 has a minimal
chatter response borrowed from the later G series gate. The “DYN SC” (Dy-
namic Sidechain) button allows the user to create frequency dependent gain
reduction arrangements with either the Compressor or Gate/expander.
UAD, UAD-1, UAD-2 and UAD 4K are trademarks of Universal Audio, Inc. All other names are
trademarks of Solid State Logic, which are in no way associated or affiliated with Universal Audio,
Inc. These trademarks of other manufacturers are used solely to identify the products of those
manufacturers whose circuits and sounds were studied during the sound development of the UAD
4K products. Use of third party trademarks are for informational purposes only and do not imply an
endorsement or sponsorship of Universal Audio’s products.
UAD Powered Plug-Ins Manual - 483 - Chapter 49: SSL E Channel Strip
CHAPTER 50
UAD Powered Plug-Ins Manual - 484 - Chapter 50: SSL G Bus Compressor
SSL G Bus Compressor Controls
Make Up Make Up controls the signal level that is output from the plug-in. The range is
0 dB to +15 dB.
Generally speaking, adjust the Make Up control after the desired amount of
compression is achieved with the Threshold and Ratio controls. Make Up
does not affect the amount of compression.
Attack Attack sets the amount of time that must elapse once the input signal reaches
the Threshold level before compression is applied. The faster the Attack, the
more rapidly compression is applied to signals above the threshold. Avail-
able Attack times are discrete values of 0.1ms, 0.3ms, 1ms, 3ms, 10ms, and
30ms.
The availability of relatively slow attack times (as compared to other compres-
sors) is one factor that can provide the in-your-face-pumping quality that is so
popular with large console VCA-style compressors.
Release Release sets the amount of time it takes for compression to cease once the in-
put signal drops below the threshold level. Slower release times can smooth
the transition that occurs when the signal dips below the threshold, especially
useful for material with frequent peaks. However, if you set the Release time
too long, compression for sections of audio with loud signals may extend to
lengthy sections of audio with lower signals.
UAD Powered Plug-Ins Manual - 485 - Chapter 50: SSL G Bus Compressor
Available Release times are discrete values of 100ms, 300ms, 600ms, 1.2s,
and Auto. The Auto release characteristic for SSL G Bus Compressor has a
unique quality that is optimized for program material.
Power (IN) The Power button determines whether the plug-in is active. Click the Power
button to toggle the processor state. Power is useful for comparing the pro-
cessed sound to that of the original signal.
The Fade function processes the signal at the output of the compressor. The
fade signal level that is output has an exponential curve.
UAD Powered Plug-Ins Manual - 486 - Chapter 50: SSL G Bus Compressor
Fade Rate Fade Rate determines the amount of time that will pass between the Fade but-
ton being activated and the plug-in output level being reduced to minimum (or
being raised to 0 dB in the case of a fade in). The available range is from 1.0
second to 60 seconds.
Fade times immediately reflect the current Fade Rate value. Therefore a fade
out that has already been initiated can be accelerated by changing Fade Rate
during the fade out. Conversely, a fade in can be accelerated by changing
Fade Rate during the fade in.
Auto Fade Activating the Auto Fade button initiates a fade out. The fade out time is de-
Button termined by the Fade Rate parameter. The Fade button blinks when a fade out
is in progress, and is continuously lit when the fade out is complete (when the
Fade Rate time has elapsed).
Deactivating Fade (clicking the solid-lit button) initiates a fade in. During a
fade in, the signal level is increased from the current level of attenuation to 0
dB of attenuation. The Fade button flashes when a fade in is in progress, and
is no longer illuminated when the fade in is complete (when the Fade Rate
time has elapsed).
Toggling the Fade button causes an already active fade to reverse direction,
without a jump in output level. The Fade Rate is constant even if an active fade
is interrupted. For example: If the Fade Rate value is 30 seconds and a fade
out is initiated, then Fade is clicked again after 20 seconds, it will take 20 sec-
onds to fade back in.
Tip: Shift+click the Fade button to instantly return the level back to 0 dB (this
feature cannot be automated).
The SSL G is designed with the 2-bus in mind, and the control set adjusts the
L/R simultaneously. The ratios, attack and release settings are also specially
tailored for bus use, and give just the right variety of options to make it useful
for a wide variety of source material. Attack and release times allow the com-
pression behavior to be ‘tuned’ to the tempo and feel of the song to some de-
UAD Powered Plug-Ins Manual - 487 - Chapter 50: SSL G Bus Compressor
gree, and the “Auto” setting provides a program-dependent, multi-stage re-
lease for the greatest degree of transparency. Use the 2:1 for the most
transparent sound and 10:1 for tougher, more audible sound, or 4:1 for in
between. Usually, this processor is meant to be used with minimal gain reduc-
tion. In most cases, setting the threshold for 1-2 dB average gain reduction is
most common, with occasional transients that go beyond the average. In qui-
eter passages little or no meter movement will occur. Use make up gain to get
a good gain match between active and bypassed.
Traditionally, the SSL G is most commonly used from the beginning of the mix
process, and the engineer is “mixing to” the sound and behavior of the com-
pressor. The ideal way to audition this plugin is on a new mix, dropped into
an insert on your stereo master fader. In this case, you will be spending a lot
of time keeping an eye on gain reduction metering and you may make tweaks
to the setup as the mix progresses. Of course it can also be dropped in exist-
ing mixes at any time, but keep in mind it may take a bit more effort to dial
in, especially if your ear is already used to the sound without its compression
properties.
The SSL G is also useful of groups, such as drum busses. in this case, a more
aggressive approach may be appropriate, with a greater range of gain re-
duction. 10:1 will give a harder sound often desired for drum groups. Fast at-
tacks releases will give the most audible sound of the compressor working.
Finally Auto Fade is useful when the end of a song needs a gradual decrease
in volume. The speed of the fade can be tuned from 1 to 60 seconds, and in-
corporates SSL's unique fade curves. fade in is also available.
UAD, UAD-1, UAD-2 and UAD 4K are trademarks of Universal Audio, Inc. All other names are
trademarks of Solid State Logic, which are in no way associated or affiliated with Universal Audio,
Inc. These trademarks of other manufacturers are used solely to identify the products of those
manufacturers whose circuits and sounds were studied during the sound development of the UAD
4K products. Use of third party trademarks are for informational purposes only and do not imply an
endorsement or sponsorship of Universal Audio’s products.
UAD Powered Plug-Ins Manual - 488 - Chapter 50: SSL G Bus Compressor
CHAPTER 51
Studer A800
All visual and aural references to Studer products and all use of Studer trademarks are being made
with written permission from Harman International Industries, Inc. Any references to third party tape
formulations are used solely for identification and do not imply any endorsement by, or affiliation
with, any tape manufacturer.
Operational Overview
The Studer A800 for UAD-2 provides all of the original unit’s desirable ana-
log sweetness; like magnetic tape, users can dial in a clean sound, or just the
right amount of harmonic saturation using the Input and Output controls. The
reel deck IPS control steps through the three tape speed choices available on
the original hardware (7.5, 15, or 30 IPS), each with distinct frequency shift,
head bump and distortion characteristics. The Tape Type control lets users
choose from four of the most popular magnetic tape formulas of the last three
decades, each with their own subtle sonic variation and tape compression
characteristics. The Cal control allows the user to choose between +3dB,
Secondary controls are hidden behind the reel deck, and can be exposed by
clicking on the Studer badge or Open label of the plug-in GUI. The Equaliser
control allows the user to select between the American (NAB) and European
(CCIR) standardized EQs, providing regional pre-emphasis/de-emphasis fil-
tering at 7.5 and 15 IPS, each with its own sonic qualities — plus the AES EQ
at 30 IPS. The HF Bias calibration parameter allows the user to tune the HF os-
cillation voltage feed to the magnetic record head, striking a balance be-
tween record sensitivity and distortion. This can also be used creatively as an
effect — from warm, overbiased sounds, to voltage-starved distortion and
chatter. HF Record is a calibration filter that allows for HF makeup when the
ideal Bias leaves a high frequency deficiency; both HF Bias and HF record
are fed into the tape nonlinearity. Sync and Repro HF and LF calibration EQs
allow for adjusting for a flat playback response, or can also be used cre-
atively. All Secondary Controls (page 496) can be automatically calibrated
to the manufacturer’s recommended settings via the A800’s Auto Cal feature,
or may be disabled. Finally, separate controls for Hiss and Hum are available
— each tuned to default settings to match the hardware behavior — with a
global noise bypass option.
Multitrack Tape The primary purpose of Studer A800 is to obtain multichannel tape sonics
Machine within the DAW environment. To obtain the classic multitrack tape sound, the
plug-in should be placed as the first insert on individual tracks, before other
processing is applied. Creative “non-standard” results can be obtained by
placing the Studer A800 in subsequent inserts after other processors or on
busses in a send/return configuration. Mixdown to two tracks can be emu-
lated by placing the plug-in on the stereo output bus.
Figure 152. The Studer A800 plug-in window with exposed secondary controls
Mono/Stereo The UAD Studer A800 is designed with a single-channel interface, to emulate
Operation the individual channels of a multitrack tape recorder. However, when the
plug-in is used on a stereo track, the “mono” controls affect both channels of
the stereo signal identically.
Primary Controls
Thru
Note: DSP usage is reduced only when DSP LoadLock is disabled. If DSP
LoadLock is enabled (the default setting), activating Thru will not reduce DSP
usage.
Input
Input mode emulates the sound of the A800 through the machine electronics
only, without tape sonics. This is the scenario when the machine is in live mon-
itoring mode but the tape transport is not running.
Sync
Sync mode models the sound of direct recording and playback via the
sync/record head, plus all corresponding machine electronics.
Repro mode models the sound of recording through the record head and
playback through the reproduction head, plus all corresponding electronics.
Tape Type Tape Type selects the active tape stock formulation. Four of
the most popular 2” magnetic tape formulas are modeled in
the A800 plug-in: 250, 456, 900, and GP9. Each type has
its own subtle sonic variation, distortion onset, and “tape
compression” characteristics.
Generally speaking, the lower the Cal Level for each for-
mula, the higher the signal level required to reach saturation and distortion.
Cal Level Cal Level automatically sets tape calibration/fluxivity. The Cal
Level setting takes care of the setup one would need to make
under equivalent hardware operation, and sets the reference
tape/flux level without disturbing the (unity) gain of the
plug-in.
The record, repro, and sync gain trims found on the A800
channel cards are not present on the plug-in. Instead (when “Auto Cal” on
page 498 is enabled), these controls are amalgamated into this single Cal
Level gain control.
As tape formulas advanced, their output level increased, thus lowering rela-
tive noise floor. +3, +6 and +9dB output formulas were available in the 2”
format. Under normal use, the machine would be calibrated to the tape’s out-
put level. However, users would sometimes under-calibrate to leave more
headroom for a broader sweet or to prevent electronics from clipping. There-
fore, the user can go traditional and calibrate to the recommended levels, or
select a non-corresponding calibration setting with Cal Level.
As an example, if 456 is the selected Tape Type and when Cal Level is set at
+6 (6 dB higher than the NAB tape standard), the reference fluxivity level is
355 nW/m (nanoweber per meter) and is 10 dB below the point where THD
reaches 3% (referred to as the maximum operating level). Therefore, with a
1kHz test tone at –12dBFS sent to the plug-in, with Tape Type set to 456, Cal
Level set to +6, and Auto Cal enabled, output levels of the plug-in will match
the input level and fluxivity on the tape will be 355 nW/m.
The manufacturer’s recommended calibration settings for each Tape Type are
as follows:
Note: The noise floor is affected by Cal Level when Noise Enable
(page 497) is active.
Tip: The UAD Studer A800 default bank offers a variety of preset Tape Type,
Tape Speed, CAL level, and EQ configurations that are commonly used for
the recording of specific genres.
IPS The IPS (Inches Per Second) control determines the speed of
(Tape Speed) the tape transport and the associated “head bump.”
15 IPS is considered the favorite for rock and acoustic music due to its low fre-
quency “head bump” (low frequency rise) and warmer sound, while 30 IPS is
the norm for classical and jazz due to its lower noise floor, greater fidelity and
flatter response. 7.5 IPS is also available for an even more colored experi-
ence, with even greater frequency shift.
Tip: Click on the “IPS” text label to stop/start the spinning reels animation.
The OFF position is a bypass control. When set to OFF, emulation processing
is disabled, the VU Meter and control LEDs are dimmed, and DSP usage is re-
duced. OFF is useful for comparing the processed settings to the original sig-
nal. OFF is identical to the Thru position in the Path Select control (page 493).
Note: DSP usage is reduced only when DSP LoadLock is disabled. If DSP
LoadLock is enabled (the default setting), activating OFF will not reduce DSP
usage.
Higher Input levels will also increase the output level from the plug-in. The Out-
put control can be lowered to compensate.
Tip: Click the “0” control label text to return to the Input value to 0.
Tip: Click the “0” control label text to return to the Output
value to 0.
The plug-in operates at an internal level of –12 dBFS. Therefore a digital sig-
nal with a level of –12 dB below full scale digital (0 dBFS) at the plug-in input
will equate to 0 dB on the plug-in meters.
Secondary Controls
The Secondary Controls are exposed by clicking the “Studer A800” label or
the “OPEN” text above it. See Figure 152 and “Primary & Secondary Con-
trols” on page 492 for more information.
Tip: The last-used state of the Secondary Controls panel (open or closed) is re-
tained when a new Studer A800 plug-in is instantiated.
The state of the panel (open or closed) settings retained with new plug-in in-
stantiations.
When the value is set to NAB, the Hum Noise frequency is 60 Hz (the United
States standard). When set to CCIR, the Hum Noise frequency is 50 Hz (the
standard in Europe and other regions). See “Noise Enable” on page 497
and “Hum Noise” on page 502 for more information about Hum.
Note: When IPS (Tape Speed) is set to 30 IPS, the yellow LEDs are not illu-
minated, indicating that the Emphasis EQ is set to AES. However, in 30 IPS
mode, the Equaliser switch can still be changed to set the frequency of Hum
Noise.
Tape Speed and Emphasis EQ were originally practical controls for record
duration vs. noise and local standards. It is important to note that historically,
the origin of the tape machine (US or European) dictated the built-in EQ em-
phasis, but later machines like the A800 had both circuits available.
While the hardware A800 has discrete controls for tape speed and emphasis
EQ, the user has to recalibrate the machine for various speeds and re-jumper
the whole machine for 30/15 or 15/7.5 IPS usage. The A800 plug-in has
three speeds and related EQ pre-emphasis/de-emphasis filtering, presented
as two easy to use controls for simple auditioning of the sonic variations.
Noise Enable The Noise Enable buttons are a global enable/disable control
for the individual hum and hiss components of the A800 model.
The amount of hum and hiss noises are continuously variable
and are set with the Hum Noise and Hiss Noise controls
(page 501). Click the Noise buttons to alternate between OFF
and ON.
Auto Cal The Studer A800 has individual parameters for Bias, HF
Record EQ, and Sync/Repro EQ. On the hardware tape ma-
chine, these calibration controls are usually adjusted when-
ever Tape Type, Tape Speed, or Emphasis EQ is changed.
When Auto Cal is OFF, the calibration parameters do not change values
when Tape Type, Tape Speed, and Emphasis EQ are modified.
Tip: When making manual calibration settings, consider disabling Auto Cal
so the manually calibrated settings are not accidentally lost if another control
is modified.
Gang Controls Gang Controls enables global control adjustments of all pa-
rameters for all Studer A800 instantiations. This functionality
may be accessed from within any active Studer A800
plug-in.
Calibration Refer to Figure 153 on page 500 for the HF Record EQ, Bias, Sync EQ, and
Controls Repro EQ controls. These controls are automatically adjusted when Auto Cal
is active, or they can be manually modified as desired.
The “flat” calibrated position for these controls is determined by Tape Type
and Tape Speed; therefore the available ± range for these controls is depen-
dent on the current calibration.
Tip: Clicking the text label for any of the HF Record EQ, Bias, and Sync/Re-
pro EQ controls will return that parameter to the calibrated value.
Note: This filter is prior to the tape record circuit, while the other EQs (Sync,
Repro) are for tape playback only.
HF Driver Bias Bias is defined as an oscillator beyond the audible range applied to the audio
at the record head, allowing for adjustment of the record behavior. Ideal bias
voltage settings provide maximum record sensitivity and low distortion. Inten-
tionally overbiasing is a common technique especially for “tape compres-
sion” of drums, giving a warmer, gently saturated sound. Underbiasing can
also be used to add distortion and other nonlinear responses, similar to gate
chatter or cold solder joints; extremely low voltages may even cause audio to
drop out entirely. Bias voltage, HF Record EQ, and fixed Emphasis EQ (CCIR,
NAB, AES) work together to provide a linear response to the recorded signal.
Sync/Repro EQ Sync and Repro Playback EQ Controls are available for tape playback cali-
bration. They affect the signal coming out of the tape circuitry.
Sync HF EQ
Adjusts the high frequency content when Path Select (page 493) is set to
Sync. When Path Select is not set to Sync, the control has no effect.
Sync LF EQ
Adjusts the low frequency content when Path Select (page 493) is set to Sync.
When Path Select is not set to Sync, the control has no effect.
Repro HF EQ
Adjusts the high frequency content when Path Select (page 493) is set to Re-
pro. When Path Select is not set to Repro, the control has no effect.
Repro LF EQ
Adjusts the low frequency content when Path Select (page 493) is set to Re-
pro. When Path Select is not set to Repro, the control has no effect.
Noise The Noise controls allow the user to control the Hum and Hiss
elements found on the original hardware. Separate controls
for Hum and Hiss are available and each can be adjusted for
creative purposes.
Tip: Click the control label text to return to the Hum or Hiss
value to 0.
Hiss affects the signal at the tape head; Hum is added after the
tape circuitry. Hum and Hiss values default to comparative lev-
els found on the original hardware. The available range for
both controls is ±25 dB.
The global Noise Enable control (page 497) must be ON for the Hum and
Hiss parameters to have any effect.
The Hum Noise frequency is dependent on the setting of the Equaliser (Em-
phasis EQ) control (page 497). The frequency is 60 Hz when set to NAB (US)
and 50 Hz when set to CCIR (European).
Note: When IPS (Tape Speed) is set to 30 IPS, the yellow Equaliser (Empha-
sis EQ) LEDs are not illuminated, indicating that the Emphasis EQ is set to
AES. However, in 30 IPS mode, the Equaliser switch can still be changed to
set the frequency of Hum Noise.
Hiss Noise
Just like the hardware, the amount of hiss is dependent on settings of the var-
ious controls. Overall Hiss Noise is set with this control, but may change
based on the Path Select, Tape Speed, Tape Type, Emphasis EQ, Cal Level,
Bias, Playback EQs, and Output Level controls.
Note: Hiss timbre and level can change with Tape Type.
History
For 50 years, the original and most revered and relied upon transparent optical gain reduction design
The Teletronix LA-2A Leveling Amplifier rivals only the Universal Audio 1176
as the most ubiquitous outboard processor on the planet, and is considered
the most revered and relied upon vocal compressor in history. With its trans-
parent, program dependent optical compression and meticulously designed
tube amplifier, Teletronix Levelers instantly became favored for studio and
broadcast use. Teletronix founder Jim Lawrence first used photocells for con-
trolling gain in the early 60s. His ingenious optical compression design was
a technological breakthrough surpassing the stability and transparency of
earlier tube detector circuits. M.T. “Bill” Putnam later bought this patented
technology and continued the manufacturing of the Teletronix LA-2A and its
follow-up products for years to come. Universal Audio still hand makes this
point-to-point, tube-amplified studio staple, including the LA-2A’s all-important
T4 electro-luminescent gain reduction cell. 50 years later, the Teletronix LA-
2A is still the workhorse compressor and the most transparently musical
method to control dynamics.
Like with the 1176 Classic Limiter Collection’s redesign from UA’s legacy
2001 UAD-1 plug-in, advances afforded by greater processing power and
over a decade of emulation experience gave the team at Universal Audio the
latitude to upgrade the LA-2A in luxurious, obsessive detail. From improve-
ments to the time constant fit methods and gain reduction nonlinearities, to the
addition of the transformer and tube amplifier distortion behaviors, the result-
ing effort furthers UA’s position as having the most authentic, in-the-box opti-
cal compression tools on the market. Universal Audio is the only company
with access to the original T4’s highly-guarded chemical and manufacturing
formula, and thus the only company with the ability to study the staggeringly
complex interactions of the unique photoresistor and luminescent light source
behaviors down to the quantum level. For discerning professionals, trust only
the tools bearing the original Teletronix name.
UAD Powered Plug-Ins Manual - 503 - Chapter 52: Teletronix LA-2A Leveler Collection
Teletronix LA-2A Leveler Collection Screenshots
UAD Powered Plug-Ins Manual - 504 - Chapter 52: Teletronix LA-2A Leveler Collection
LA-2A Plug-In Family
The complete LA-2A family is comprised of four individual plug-ins, as seen on
the previous page. Each variation has its own unique sonic characteristics.
Teletronix LA-2A The Teletronix LA-2A Leveler Collection (introduced in UAD v6.5) provides ac-
Leveler cess to three historical and highly coveted revisions in the Teletronix product
Collection
line.
The newer state-of-the-art algorithms in this bundle take full advantage of the
extra power available on UAD-2 devices and the design sophistication and
expertise gained since the introduction of the legacy LA-2A plug-in in 2001.
Teletronix LA-2A Silver
The LA-2A “Silver” captures the North Hollywood, California unit manufac-
tured in the late 1960s by Bill Putnam, with its brushed aluminum panel and
original T4B gain reduction module. Perhaps the most flexible of the three
plug-ins in the collection, this unit’s fast time constant makes it suitable on the
widest variety of program material, including transient-rich sources like drums
and percussion.
Teletronix LA-2A Gray
The LA-2A “Gray” covers Jim Lawrence’s original mid-1960s painted unit
from Pasadena, California. This unit maintains an average time constant, cov-
ering the gamut of medium speed compression uses.
Teletronix LA-2
The LA-2 captures one of the earliest Teletronix examples. This exceedingly
rare unit preceded the LA-2A by a few years and incredibly, still has the orig-
inal T4A fully intact. The LA-2 provides the slowest response and a unique
“mellowed” sound due to 50 years of luminescent panel aging inside the T4
module. Use the LA-2 with legato tempos and your most vowel-like sources for
a transparency and sublime mood unlike any other compressor.
Teletronix LA-2A The Teletronix LA-2A Legacy plug-in (Figure 157 on page 504) was, along
Legacy with the UA 1176LN Legacy, the first plug-in available for the UAD platform.
This first-generation plug-in runs on UAD-1 and UAD-2 devices. It still has a
great sound and is very usable, especially when there are not enough DSP
resources to use the second-generation models in the newer Teletronix LA-2A
Leveler Collection.
To accommodate the limited DSP resources of the UAD-1, the transformer and
I/O distortion characteristics were not modeled in this plug-in. This makes the
Teletronix LA-2A Legacy especially useful in situations where less distortion,
and less DSP usage, is desirable.
UAD Powered Plug-Ins Manual - 505 - Chapter 52: Teletronix LA-2A Leveler Collection
Operational Overview
Applications In the 60s and 70s, the LA-2A and 1176 became inextricably linked as the
must-have dynamic tools of the day. If the 1176 is to the Stratocaster in terms
of immediacy and flexibility, then the LA-2A is to the Gibson Les Paul in terms
of warmth and one-of-a-kind, magical sonic distinction. An important charac-
teristic of the T4 photocell response is that it is both program and frequency
dependent. The T4 cell has a multi-stage release, and can take a few minutes
to fully recover from the incoming signal.
The primary use is as individual inserts for sources that require nominal trans-
parent gain reduction, such as vocals, bass, strings or horns. These tools can
also be used to isolate the “color” of the output amplifier by turning off the
Peak Reduction control, even to extreme distortion settings. An interesting
sidechain distortion can be achieved at the most extreme Peak Reduction set-
tings, which primarily affects low frequencies.
Artist Presets The Teletronix LA-2A Leveler Collection includes artist presets from prominent
LA-2A users. The artist presets are in the internal factory bank and are ac-
cessed via the host application’s preset menu. The artist presets are also cop-
ied to disk by the UAD installer so they can be used within Apollo’s Console
application. The presets can be loaded using the Settings menu in the UAD
Toolbar (see “Using UAD Powered Plug-Ins” in Chapter 7 of the UAD System
Manual).
Note: Presets created with the original LA-2A Legacy plug-in are incompati-
ble with the newer Leveler Collection plug-ins.
UAD Powered Plug-Ins Manual - 506 - Chapter 52: Teletronix LA-2A Leveler Collection
Reference Level Plug-ins in the Teletronix LA-2A Leveler Collection operate at an internal refer-
ence level of –12 dBFS. This enables more range in the primary controls (Peak
Reduction and Gain) before the I/O distortion characteristics become appar-
ent (signals at the input of these plug-ins can be pushed higher before they dis-
tort).
Upsampling The Teletronix LA-2A Leveler Collection plug-ins (but not the Teletronix LA-2A
Legacy) use an internal upsampling technique. The upsampling results in a
slightly larger latency than most other UAD plug-ins. See “Upsampled Plug-
Ins” on page 550. for more information.
UAD Powered Plug-Ins Manual - 507 - Chapter 52: Teletronix LA-2A Leveler Collection
LA-2A Controls
Each model in the LA-2A plug-in collection has the same control set. The pa-
rameter descriptions below apply to all models unless otherwise noted.
Peak Reduction This control sets the amount of signal compression by adjusting the trigger
threshold. Increasing the value lowers the threshold, and therefore increases
the amount of compression. The available range is 0 dB (fully counter-clock-
wise) to -40 dB (fully clockwise).
Note: The front panel knob values, which range from 0-100, are arbitrary
and do not reflect any particular dB value.
When Peak Reduction is set to its minimum value, no compression (or limiting)
occurs but the signal is still colored by the circuitry and the output level can be
adjusted with the Gain control.
Gain The Gain knob increases the output level by up to 40 dB to compensate for the
reduced level that results from compression. Adjust the Gain control after the
desired amount of compression is achieved with the Peak Reduction control.
The Gain control does not affect the amount of compression.
Note: The front panel knob values, which range from 0-100, are arbitrary
and do not reflect any particular dB value.
Meter Knob This rotary knob sets the mode of the VU Meter. When set to Gain Reduction,
the VU Meter indicates the Gain Reduction level in dB. When set to +10 or
+4, the VU Meter indicates the output level in dB (when set to +4, a meter
reading of 0 corresponds to an output level of +4 dB).
VU Meter This is a standard VU meter that displays either the amount of gain reduction,
or output level, depending upon the setting of the Meter Function switch.
On/Power Determines whether the plug-in is active. When the Power switch is in the Off
Switch position, the plug-in is disabled and UAD DSP usage is reduced (unless
UAD–2 DSP LoadLock is enabled).
UAD Powered Plug-Ins Manual - 508 - Chapter 52: Teletronix LA-2A Leveler Collection
Compress/Limit This switch sets the compression ratio of the leveler. When set to Compress,
the compression ratio is approximately 3:1 and when set to Limit, the ratio is
approximately infinity:1. However, the compression ratios are nonlinear and
frequency dependent, so these figures are not absolute.
Note: Like the original hardware, this control is unavailable on the Teletronix
LA-2 plug-in. The plug-in is “hardwired” in Limit mode.
Emphasis The (R37) Emphasis “set screw” knob controls a shelf filter circuit in the com-
pressor’s sidechain input, thereby enabling frequency-dependent compres-
sion.
When the control is fully clockwise (the default position), the sidechain signal
is unfiltered and all frequencies in the source signal that exceed the compres-
sion threshold will trigger gain reduction equally (within the non-linear con-
straints of the electro-optical characteristics).
The LA-2A hardware was designed for use in broadcast applications. The au-
dio signal in FM broadcasting undergoes pre-emphasis and results in a 17 dB
boost at 15 kHz. Due to this increase in signal level, transmitters are subject
to over-modulation. The LA-2A hardware provides a control (R37) which con-
trols the amount of high-frequency compression.
UAD Powered Plug-Ins Manual - 509 - Chapter 52: Teletronix LA-2A Leveler Collection
Historical Background
In the 1950s while at Parsons Electronics, Electrical Engineer Jim Lawrence
was quietly asked to join the Titan Missile Program based at Cal Tech's Jet
Propulsion Lab and was assigned to develop optical sensors for the program.
Fortunately for everyone, the technology developed from Lawrence's work
lead back to a more peaceful deployment of the optical sensor, as the detec-
tor in his future Leveling Amplifier. The interactions of the luminescent panel
with the photo resistors in his T4 design are predominantly what gives the
Teletronix Levelers their signature sound.
Lawrence later broke out on his own to start Teletronix, setting up shop in his
hometown of Pasadena, California in 1958. Among the Teletronix line of
products were transmitter tubes, multiplex generators, to full-scale radio trans-
mitters. Jim's first pass at his Leveling Amplifier was realized as the Teletronix
LA-1; Around 100 units were made. Lawrence then updated the design to the
LA-2 with improved specs and circuit layout, then moved quickly to the indus-
try standard LA-2A. In 1965, just three years after the incarnation of the LA-
2A, Jim Lawrence sold the company to Babcock Electronics. Enter Bill Putnam.
Putnam picked up Babcock's broadcast division including Teletronix, and
rolled it into his parent company, Studio Electronics in 1967. From there, Uni-
versal Audio resumed manufacturing of the LA-2A, and Putnam began using
the optical detector for new designs.
UAD Powered Plug-Ins Manual - 510 - Chapter 52: Teletronix LA-2A Leveler Collection
The Teletronix LA-2A Leveler Collection Original Hardware
UAD Powered Plug-Ins Manual - 511 - Chapter 52: Teletronix LA-2A Leveler Collection
CHAPTER 53
Introduction
The original boutique, all-valve, studio distortion tool
The Culture Vulture plug-in perfectly emulates all of the original hardware’s
sonic proclivities and diabolical details, including the rich harmonic content
of its three distinct all-valve circuit topologies. With its full palette of high-gain,
studio-grade, dual-stage valve distortion, you can subtly color or utterly de-
stroy existing tracks, buses, or a full mix.
Triode mode can gently warm any source, from a mix bus to a DI bass or
synth signal tracking real time through an Apollo interface. Or add more odd-
order harmonic edginess to a vocal or rhythm guitar with Pentode 1. Not
enough pain? Tap into the nearly-impossible-to model Pentode 2 mode — a
unique, mad-genius circuit that inspires creativity and invites experimentation
with it’s opulent range of demented distortions.
UAD Powered Plug-Ins Manual - 512 - Chapter 53: Thermionic Culture Vulture
The Drive knobs and Overdrive switches control the amount of input signal hit-
ting the 6AS6 valves — with up to 20 dB of gain from Overdrive alone! The
Bias controls adjust the incoming voltage, providing dramatic differences in
response, from clean to distorted, voltage-starved chatter, and gating effects.
The Filter controls (9 kHz and 6 kHz) can be used to fine-tune your distortion
flavors even further.
While the Thermionic Culture Vulture is not a compressor per se, it can act as
sonic “glue” on a bus or an entire mix, deftly teasing out tantalizing sizzle
and detail with authentic valve heat.
Operational Overview
Two Channel Thermionic Culture Vulture is a two-channel device capable of running in ste-
Processor reo or dual-mono modes. When used on a stereo signal, the active mode is
determined by the Control Link switch. When the plug-in is used in a mono-
in/mono-out configuration, the controls for either channels can be used to ad-
just settings.
Controls Layout Like the original hardware, the arrangement of the controls for Channels 1
and 2 have a mirror image of each other (the Channel 2 controls have re-
versed ordering compared to the Channel 1 controls).
Unorthodox Some plug-in controls (Bias, Filter, Bypass, Power) are “backwards” when
Controls compared to traditional hardware designs. These anomalies are true to the
original hardware design.
UAD Powered Plug-Ins Manual - 513 - Chapter 53: Thermionic Culture Vulture
Expanded The Culture Vulture plug-in offers two key features not found on the original
Feature Set hardware: Mix and Control Link.
The Mix control can be used for parallel processing on any bus, adding gen-
tle valve presence, punch, and grit to drums, vocals, or an entire mix. With
the Control Link function, perfectly matched stereo imaging is possible to save
time and preserve balances.
Artist Presets The Thermionic Culture Vulture plug-in includes artist presets from prominent
users. The artist presets are in the internal factory bank and are accessed via
the host application’s preset menu. The artist presets are also placed by the
UAD installer so they can be used within Apollo’s Console application. The
presets can be loaded using the Settings menu in the UAD Toolbar (see “Us-
ing UAD Powered Plug-Ins” in Chapter 7 of the UAD System Manual).
This plug-in includes additional artist presets that are not available in the in-
ternal factory bank. These additional presets can also be accessed using the
Settings menu in the UAD Toolbar.
Upsampled This plug-in uses an internal upsampling technique to achieve sonic design
Plug-In goals. The upsampling results in a slightly larger latency than other UAD plug-
ins (55 samples; 88 samples at 176.4 and 192 kHz).
UAD Powered Plug-Ins Manual - 514 - Chapter 53: Thermionic Culture Vulture
Thermionic Culture Vulture Controls
Controls for Channel 1 and Channel 2 are identical and therefore are only
described once. The Link, Mix, and Power controls apply to both channels.
Drive Drive adjusts the amount of input gain (amplified by the EF86
input stage valve), that is sent to the 6AS6 distortion valve. Ro-
tating this control clockwise increases the amount of distortion.
The available Drive range is from 1 to 11. The values are arbi-
trary and do not represent absolute levels.
Bias Bias varies the amount of current passed through the cathode
in the 6AS6 distortion valve. The amount of Bias current is dis-
played by the Meters.
Medium settings are generally best for gently warming sounds without obvi-
ous distortion. The cleanest setting is at approximately 0.25 to 0.3 milliam-
peres.
The default Bias knob value is 6 for 0.45 milliamperes of bias current. The
knob values of 1 to 11 are arbitrary and do not represent absolute levels.
Distortion Type The 6AS6 distortion valve can operate in three different operat-
ing modes by changing the internal wiring of the tube circuit. Dis-
tortion Type switches this mode so different characteristics can be
obtained.
UAD Powered Plug-Ins Manual - 515 - Chapter 53: Thermionic Culture Vulture
This switch interacts extensively with the Drive, Bias, and Overdrive controls.
The available distortion types, and their characteristics, are described below.
T (Triode)
Triode mode generates more 2nd-order (even) harmonics and is generally the
cleanest, smoothest, and “sweetest” mode. Triode mode is great for adding
tube warmth to signals without obvious distortion.
P1 (Pentode 1)
P2 (Pentode 2)
Pentode 2 mode has an unusual wiring for a pentode circuit and a particu-
larly aggressive sound, especially with high Bias current and/or when Over-
drive is engaged.
This setting can produce some of the most unusual and over-the-top effects
such as frequency doubling, gating, and stuttering. It is normal for this mode
to be quieter than Triode or Pentode 1 modes.
Overdrive is engaged when the switch is in the down position. The default
value is off (up position). Like the Filter, Bypass, and Power switches, the be-
havior of this control is reversed from typical hardware designs.
The behavior of this switch has a variation from the original hardware. When
Overdrive is off (up position), 9 dB of clean gain is added to the input signal.
The extra gain is included in the plug-in to compensate for the extreme level
changes that occur in the original hardware when Overdrive is engaged
(making it easier to quickly compare signals with Overdrive off and on), and
also to provide for a more usable range of clean settings.
UAD Powered Plug-Ins Manual - 516 - Chapter 53: Thermionic Culture Vulture
Filter Filter applies a 12 dB per octave high pass filter at the output
of the 6AS6 distortion valve circuit for a smoother sound.
Note: There is a slight rolloff of upper frequencies even when Filter is set to
Off. However, this rolloff does not occur when Distortion Type is set to P2.
Output Level Output Level controls the amount of signal going into
the output valve (type 5963), which has its own color-
ation.
The available range is from 1 to 11 and the default value is maximum. The
values are arbitrary and do not represent absolute levels.
Control Link This switch causes the controls for Channels 1 and 2 to be
stereo linked. When engaged (right position), adjusting a
control on one channel will cause the equivalent control on
the other channel to move to the same value.
When used in a mono configuration, the switch is fixed in the linked position.
Important: When Control Link is engaged, all Channel 1 values are copied
to Channel 2, and any control offsets between channels are lost.
UAD Powered Plug-Ins Manual - 517 - Chapter 53: Thermionic Culture Vulture
Mix The output balance between the signal processed by the plug-in and
the original dry source signal can be adjusted with the Mix control.
Mix facilitates parallel processing techniques without having to create
additional routings in the DAW.
When set to 0% (minimum), only the unprocessed (dry) source signal is out-
put. When set to 100% (the default value), only the processed (wet) signal is
output. When set to 50%, an equal blend of both the dry and wet signals is
output. The balance is continuously variable and phase accurate throughout
the control range.
Power This switch determines whether the plug-in is active. When the
Power switch is in the Off (up) position, plug-in processing is dis-
abled and UAD DSP usage is reduced (unless UAD-2 DSP Load-
Lock is enabled).
Power Lamp
The lamp above the Power switch is illuminated when the plug-in is active.
Tip: Click the Power Lamp to toggle the enable/disable state of the plug-in.
UAD Powered Plug-Ins Manual - 518 - Chapter 53: Thermionic Culture Vulture
“Warning: Do not take this unit
seriously. The Culture Vulture is
a fun effects unit and has been
designed for maximum
pleasure!”
- Thermionic Culture Ltd.
UAD Powered Plug-Ins Manual - 519 - Chapter 53: Thermionic Culture Vulture
CHAPTER 54
Trident A-Range EQ
Overview
The original Trident A-Range desk holds near-mythic status in the professional
recording industry, and is arguably the best loved of the classic Trident con-
sole designs. Particularly noted for its fantastic preamps and the unique band
interactions of its colorful EQ section, the Malcolm Toft / Trident-designed
A-Range console has made an indelible impact on the sound of record mak-
ing. During the “Golden Years” of rock, the A-Range was employed to record
some truly great records — David Bowie’s The Rise and Fall of Ziggy Stardust,
Lou Reed’s Transformer and Queen’s Sheer Heart Attack, to name a few —
helping to solidify this console’s reputation forever. And now, this sound
comes to the UAD Powered Plug-Ins platform, courtesy of the Trident A-Range
Classic Console EQ plug-in.
The rest of the EQ section contains four bands: low shelf, low-mid bell,
high-mid bell, and high shelf (see Figure 160). Each band has four selectable
fixed frequencies and ±15 dB of gain. These were the good old days before
sweepable frequencies and bandwidth controls, but the results are wonder-
fully warm and musical. The controls complement is rounded out with phase,
output level, and bypass.
There is band interaction between the high and low shelving filters, and also
between the low-mid and high-mid bell filters. The midband interactions can
be significant if the center frequencies are near each other.
Band Layout Each of the four main EQ bands have similar controls. The band frequency is
controlled by its knob, and the band gain is controlled by its slider.
Phase The Phase (Ø) button inverts the polarity of the signal. The signal is in-
verted when the button is engaged (darker). Leave the button inactive
(lighter) for normal phase. Phase is independent of the EQ IN setting.
Low Pass Filters Three low pass filters are available, and they can be used simul-
taneously in any combination. The available cutoff frequencies
are 15 kHz, 12 kHz, and 9 kHz with a slope of 12 dB per oc-
tave. Each filter is active when its button is engaged (darker).
Each low pass filter “adds” to the others. For example, engaging
the 15K filter will rolloff frequencies above 15 kHz, but engaging
9K as well will also attenuate frequencies above 15 kHz, even
more than if 15K was used by itself.
Note: See Figure 160 on page 521 and Figure 161 on page 523 when re-
ferring to the band parameters below.
High Shelf The high shelf offers Trident-A’s famous high frequency shelving EQ.
High Shelving Frequency
The edge frequency of the high shelf filter is specified by this knob. Four shelf
edge frequencies are available: 15 kHz, 12 kHz, 10 kHz, and 8 kHz.
High Shelving Gain
The gain for the high shelf filter is specified by the horizontal slider control.
The available range is ±15 dB. The gain value is zero when the slider is in the
center position.
High-Mid Band The high-mid EQ offers peak/dip “bell” equalization for the high-to-middle
frequencies.
High-Mid Frequency
The center frequency of the high-mid filter is specified by this knob. Four cen-
ter frequencies are available: 9 kHz, 7 kHz, 5 kHz, and 3 kHz.
High-Mid Gain
The gain for the high-mid filter is specified by the horizontal slider control. The
available range is approximately ±15 dB. The gain value is zero when the
slider is in the center position.
Low-Mid Frequency
The center frequency of the low-mid filter is specified by this knob. Four center
frequencies are available: 2 kHz, 1 kHz, 500 Hz, and 250 Hz.
Low-Mid Gain
The gain for the low-mid filter is specified by the horizontal slider control. The
available range is approximately ±15 dB. The gain value is zero when the
slider is in the center position.
Low Shelf The low shelf offers low frequency shelving equalization.
The edge frequency of the low shelf filter is specified by this knob. Four shelf
edge frequencies are available: 150 Hz, 100 Hz, 80 Hz, and 50 Hz.
The gain for the low shelf filter is specified by the horizontal slider control. The
available range is ±15 dB. The gain value is zero when the slider is in the cen-
ter position.
Gain slider The band gain sliders can be instantly moved to any position by clicking any-
shortcuts where within its range.
Tip: Clicking just above or below the “0” (zero) graphic returns the associ-
ated slider to its center (zero gain) position.
Each high pass filter “adds” to the others. For example, engag-
ing the 50 Hz filter will rolloff frequencies below 50 Hz, but en-
gaging 100 Hz as well will also attenuate frequencies below 50
Hz, even more than if 50 Hz was used by itself.
Output Level The Output knob controls the signal level that is output from the
plug-in. The default value is 0 dB. The available range is –24 dB
to 12 dB.
Note: Compensating for Trident A-Range EQ is not required if the host ap-
plication supports full plug-in delay compensation throughout the signal path,
or when it is used only on the outputs.
All visual and aural references to the TRIDENT A-RANGE EQ are trademarks being made with
written permission from PMI AUDIO.
History
The Definitive Collection of the World’s Most Famous Compressors
The original Universal Audio 1176, designed by audio Renaissance man and
UA founder M.T. “Bill” Putnam, represented a major breakthrough in limiter
technology. The first true peak limiter to feature all-transistor circuitry and FET
gain reduction, the original 1176 offered superior performance and a signa-
ture sound — including a lightning-fast 20 microseconds attack time. Ever
since its announcement in 1967, the 1176 has lent its character and punch
to some of the greatest recordings in history — creating a solid framework for
any mix, in any genre.
Evolved from the popular Universal Audio 175 and 176 tube limiters, the
1176 retained proven qualities of these industry leaders, and set the standard
for all limiters to follow. Entries found in Putnam’s design notebook point to his
extensive experimentation with the newly developed FET (Field Effect Transis-
tor) in various configurations. Eventually, he found a way of using the FET as
the gain-controlling element of a compressor/limiter. While the 1176 has
seen a huge number of revisions in its history, the most significant revision
was by UREI engineer, Brad Plunkett, in an effort to reduce noise — hence the
birth of the 1176LN at Rev C. Numerous design changes have followed
since, resulting in at least 13 revisions and variations of the 1176.
Universal Audio released its first 1176 plug-in emulation, the UAD 1176LN,
in 2001. This plug-in launched the UAD platform, and inspired a decade of
analog emulation software.
Today, with the Universal Audio 1176 Limiter Plug-Ins Collection, we’ve cir-
cled back to the 1176 and modeled its entire electronic path from stem to
stern — including its transformers, FET and bipolar transistor amplifiers, with
improvements in its gain reduction nonlinearities and Attack/Release fits. The
resulting 1176 Classic Limiter Plug-In Collection provides unrivaled emula-
tions of three distinct 1176 units, and is indispensable for any serious engi-
neer or producer.
UAD Powered Plug-Ins Manual - 526 - Chapter 55: UA 1176 Classic Limiter Collection
UA 1176 Screenshots
UAD Powered Plug-Ins Manual - 527 - Chapter 55: UA 1176 Classic Limiter Collection
1176 Plug-In Family
The complete 1176 family is comprised of five individual plug-ins, as seen on
the previous page. Each variation has its own unique sonic characteristics.
UA 1176 Limiter The UA 1176 Limiter Collection bundle (introduced in UAD v6.2) provides
Collection three distinct 1176 revisions, representing over 40 years of design iterations
to the original 1176 — the world's most recognized compressor.
The newer state-of-the-art algorithms in this bundle take full advantage of the
extra power available on UAD-2 devices and the design sophistication and
expertise gained since the introduction of the legacy 1176LN plug-in ten
years prior.
This model (Figure 162 on page 527) represents the original Putnam FET lim-
iter design, complete with its higher distortion and unique FET gain amplifier
characteristics.
Although the input can clip even when gain reduction is not occurring in all
the Limiter Collection bundle models, the input clipping is most evident on the
Rev A model.
This model (Figure 163 on page 527) covers the early 70’s / Brad Plunkett
“LN” (Low Noise) era of the 1176 circuit lineage, with variations including a
more linear compression response, transistor gain amplification, and a
change to the program dependency.
This model (Figure 164 on page 527) provides UA’s rare 1176 40th Anni-
versary Edition, complete with exclusive “hot-rod” mods — including its lower
2:1 compression ratio and a fixed “super slow” 10 ms attack mode.
UAD Powered Plug-Ins Manual - 528 - Chapter 55: UA 1176 Classic Limiter Collection
UA 1176LN/SE The 1176 legacy bundle includes the UA 1176LN Legacy and UA 1176SE
Legacy Legacy plug-ins. These first-generation plug-ins run on UAD-1 and UAD-2
devices.
To accommodate the limited DSP resources of the UAD-1, the input trans-
former and I/O distortion characteristics were not modeled in these plug-ins.
This makes the legacy LN/SE versions especially useful in situations where
less distortion is desirable.
UA 1176LN Legacy
The UA 1176LN Legacy plug-in (Figure 165 on page 527) was, along with
the LA-2A, the first plug-in available for the UAD platform. It still has a great
sound and is very usable, especially when there are not enough DSP re-
sources to use the second-generation versions in the newer UA 1176 Limiter
Collection.
UA 1176LN SE Legacy
The UA 1176SE Legacy “Special Edition” (Figure 166 on page 527) is de-
rived from the UA 1176LN Legacy plug-in. Its algorithm was revised in order
to provide sonic characteristics similar to the UA 1176LN Legacy, but with
significantly less DSP usage. It provides “1176LN-like sound” when DSP re-
sources are particularly constrained. The UA 1176SE Legacy sound and be-
havior is practically identical to the UA 1176LN Legacy at nominal settings;
at extreme (cranked) settings, the differences are more obvious.
UAD Powered Plug-Ins Manual - 529 - Chapter 55: UA 1176 Classic Limiter Collection
Operational Overview
Applications Generally speaking, the primary use for the 1176 plug-ins are as individual
inserts for sources that require compression, such as an individual snare, vo-
cal, or guitar track, or for multi-instrument sources such as a stereo drum buss.
Because the UA 1176 Limiter Collection also models the input and output am-
plifiers, these models can also be used as “tone boxes” to add 1176 color
without compression/limiting by disengaging the ratio control (all Ratio but-
tons “up”).
The four Ratio buttons determine the degree of compression; lower ratios for
compression, higher ratios for limiting. Disengaging all the Ratio buttons
(Shift+Click the currently selected ratio) disables compression altogether, but
signal continues to pass through the 1176 circuitry. This is commonly used to
add the “color” of the 1176LN without any gain reduction. At the request of
users, the wide range of “Multi-Button” combinations possible with the hard-
ware is now possible — including the famous “All Button” sound.
Control The UA 1176 Limiter Collection plug-ins are meticulous emulations of the orig-
Response & inal hardware in every regard, including control responses and interactions.
Interactions
Each 1176 has unique characteristics for gain, threshold, compression knee,
distortion onset, and sweet spots. Setting the controls to the same positions on
the different plug-ins may yield radically different results, especially depend-
ing on the source signals.
This accurate control modeling also applies to the Input and Output control
tapers and amplifier levels. The same knob positions on one 1176 could pro-
duce a dramatically louder (or softer) levels on another. For this reason (to
prevent unexpected and potentially damaging output level jumps), presets are
not interchangeable between the 1176 variations.
UAD Powered Plug-Ins Manual - 530 - Chapter 55: UA 1176 Classic Limiter Collection
Grit A simple 1176 trick is turning the attack and release up all the way to their
fastest setting. This has the audible effect of adding compression distortion to
the audio source, and is especially pronounced in all-buttons mode. What
happens here is the attack and release are happening so fast that minute level
fluctuations sound like distortion. It can add a very useful, gritty compression
effect.
This effect is useful on bass, where you might need compression and distortion
at the same time, and the 1176 can provide both in a unique way. This trick
also sounds great on screaming lead vocals.
Artist Presets The UA 1176 Limiter Collection includes artist presets from prominent 1176
users. Some of the artist presets are in the internal factory bank and are ac-
cessed via the host application’s preset menu. Additional artist presets are
copied to disk by the UAD installer. The additional presets can be loaded us-
ing the Settings menu in the UAD Toolbar (see “Using UAD Powered Plug-Ins”
in Chapter 7 of the UAD System Manual).
Note: Presets created with the original 1176LN Legacy and 1176SE Legacy
plug-ins are incompatible with the newer Classic Limiter Collection plug-ins.
Upsampling The UA 1176 Classic Limiter Collection plug-ins (but not the UA 1176LN Leg-
acy or UA 1176SE Legacy) use an internal upsampling technique. The up-
sampling results in a slightly larger latency than most other UAD plug-ins. See
“Upsampled Plug-Ins” on page 550 for more information..
UAD Powered Plug-Ins Manual - 531 - Chapter 55: UA 1176 Classic Limiter Collection
1176 Controls
Each 1176 plug-in variation has the same control set, so they are only de-
tailed once. The parameter descriptions below apply to all models unless oth-
erwise noted.
Input Input adjusts the amount of gain reduction as well as the relative threshold.
Rotate the knob clockwise to increase the compression amount.
Like the original hardware, the label values are somewhat arbitrary; the
knobs are not calibrated to any particular dB values and levels will vary be-
tween the various plug-in models. Even when the Input knob is set to “∞” sig-
nals can still pass into the processor and be compressed.
Note: In the UA 1176 Limiter Collection plug-ins, increasing Input will in-
crease distortion.
Output Output determines the final output level of signal leaving the 1176. Once the
desired amount of limiting or compression is achieved with the use of the Input
control, the Output control can be used to make up any gain lost due to gain
reduction.
To monitor the Output level, set the VU Meter to +8 or +4. The Output control
does not affect the amount of compression.
Note: In the 1176 Limiter Collection plug-ins, increasing Output will increase
distortion.
Attack Attack sets the amount of time it takes the 1176 to respond to an incoming sig-
nal and begin gain reduction. The 1176 attack time is adjustable from
20 microseconds to 800 microseconds (both extremely fast).
The attack time is fastest when the Attack knob is in its fully clockwise position,
and is slowest when it is in its fully counter-clockwise position. When a fast at-
tack time is selected, gain reduction kicks in almost immediately and catches
transient signals of very brief duration, reducing their level and thus “soften-
ing” the sound.
Slower attack times allow transients (or partial transients) to pass before lim-
iting or compression begins on the rest of the signal. Note that the actual at-
tack time varies slightly based on the selected ratio and the particular plug-in
model in use. Lower ratios will maintain the fastest attack times.
UAD Powered Plug-Ins Manual - 532 - Chapter 55: UA 1176 Classic Limiter Collection
The behavior of the Attack knob varies slightly between the models, as de-
tailed below.
UA 1176AE Attack
The 1176AE offers a unique, fixed 10 ms “SLO” Attack mode when this con-
trol is moved to the fully counter-clockwise position.
When Attack is in the OFF position the I/O amplifiers remain active while the
compression circuit is bypassed. This enables these models to add 1176
color without dynamics processing. This function is identical to disengaging
all the Ratio buttons.
Note: To avoid unexpected level changes that can result when compression
is disengaged, on these models the OFF text label must be clicked to move the
Attack knob to the OFF position.
Release Release sets the amount of time it takes the 1176 to return to its initial (pre-
gain reduction) level. The 1176 release time is adjustable from 50 millisec-
onds to 1100 milliseconds (1.1 seconds).
Note that the actual release time varies slightly based on the particular plug-
in model in use and also partially depends on the program material.
The release time is fastest when the Release knob is in its fully clockwise po-
sition, and is slowest when it is in its fully counter-clockwise position. If the re-
lease time is fast, “pumping” and “breathing” artifacts can occur, due to the
rapid rise of background noise as the gain is restored. If the release time is
too slow, however, a loud section of the program may cause gain reduction
that persists through a soft section, making the soft section difficult to hear.
UAD Powered Plug-Ins Manual - 533 - Chapter 55: UA 1176 Classic Limiter Collection
About Program-Dependent Release
The fast release time is the effective release time after transients; the slow re-
lease time is the release time after sustained high-RMS signals. The transition
time expresses how long the signal must be “in compression” before the slow
release time comes into effect.
The original “Bluestripe” and 1176AE has a different slow release-time and
transition-time when compared to the “Blackface” revisions.
Ratio The four Ratio pushbutton switches (to the left of the VU Meter) determine the
compression ratio of the plug-in. Ratios of 20:1, 12:1, 8:1, and 4:1 are avail-
able for all 1176 models except the UA 1176AE, which has 20:1, 8:1, 4:1,
and 2:1 modes.
The 20:1 ratio is typically used when peak-limiting is desired, while the lower
ratios are typically used for general dynamic range compression.
Multiple Ratio One of the most unique features of the 1176 hardware is the ability to press
Buttons multiple Ratio buttons in simultaneously to create unusual compression or lim-
iting behavior and increased compression distortion. See Figure 167 on
page 535 for available modes.
All Button Mode Engineers typically use “All Button” mode on drums or on ambience or room
mics. It can also be used to make a bass or guitar sound “dirty” or for putting
vocals “in your face.” In All-Button mode (sometimes also known as “British
Mode”), distortion increases radically due to a lag time on the attack of initial
transients.
UAD Powered Plug-Ins Manual - 534 - Chapter 55: UA 1176 Classic Limiter Collection
In All Button mode the ratio goes to somewhere between 12:1 and 20:1, and
the bias points change all over the circuit, thus changing the attack and re-
lease times as well. The unique and constantly shifting compression curve that
results yields a trademark overdriven tone that can only be found in this family
of limiter/compressors.
Multi Button The UA 1176 Limiter Collection includes the ability to select a variety of “Multi
Modes Button” combinations, offering various interpretations of the “All Button” idio-
syncrasies. Various button combinations will yield audibly different compres-
sion characteristics.
In UA 1176LN/SE Legacy
• To select All Button mode on the UA 1176LN/SE Legacy, shift+click any Ra-
tio button.
Available Multi
Button Modes
Figure 167. The Multi-Button modes available in the UA 1176 Limiter Collection. All-Button mode (far
right) is available in 1176LN and 1176SE.
UAD Powered Plug-Ins Manual - 535 - Chapter 55: UA 1176 Classic Limiter Collection
VU Meter This is a standard VU meter that displays either the amount of gain reduction,
or output level, depending upon the setting of the Meter Function switch.
Meter Function These four pushbutton switches (to the right of the VU Meter) determine the
mode of the VU Meter, and whether the plug-in is enabled. When set to GR,
the VU Meter indicates the Gain Reduction level in dB. When set to +8 or +4,
the VU Meter indicates the output level in dB; when set to +4, a meter reading
of 0 corresponds to an output level of +4 dB.
When the Meter Function is set to GR mode and multiple Ratio buttons are en-
gaged, the Meter will appear to behave strangely. This is normal behavior in
the 1176 hardware, and is faithfully recreated in the plug-in.
When the OFF switch is engaged, the plug-in is disabled and UAD DSP usage
is reduced (unless UAD-2 LoadLock is enabled).
UAD Powered Plug-Ins Manual - 536 - Chapter 55: UA 1176 Classic Limiter Collection
CHAPTER 56
The 610-B is the current Universal Audio design employed in the popular
modern equivalents such as the Universal Audio 2-610 and 6176. The sheer
number of classic recordings made by the 610, new or old, is staggering.
From Coldplay to Cold War Kids, and Duke Ellington to The Doors, the 610
has been part of the fabric of modern recording since 1958.
With over a year in research and design, the UA 610 Preamp and EQ Col-
lection represents the next major milestone in the evolution of Universal Au-
dio’s 610, and for preamplification as a whole. For the first time, the UA 610
Preamplifier and EQ Collection plug-ins offer the complete sound, behavior
and features of a dedicated tube preamp.
UAD Powered Plug-Ins Manual - 537 - Chapter 56: UA 610 Tube Preamp & EQ Collection
UA 610 Screenshots
Figure 168. The UA 610 Tube Preamp and EQ Collection plug-in windows
UAD Powered Plug-Ins Manual - 538 - Chapter 56: UA 610 Tube Preamp & EQ Collection
The UA 610 Plug-Ins
The UA 610 Tube Preamp Collection is comprised of two distinct plug-ins, as
shown in Figure 168 on page 538: The vintage UA 610-A, and the modern
UA 610-B. Each plug-in has its own modeling and each captures its unique
segment in the 610’s sonic history.
The complete signal path is modeled for both 610 plug-ins, including tube am-
plifiers and transformer components, along with all the phase shift and distor-
tion characteristics that are inherent in each hardware preamp.
Vintage 610-A The original 610 Modular Amplifier had two versions; the 610 and the
610-A. Besides minor cosmetic differences (such as updates to the panel lay-
out and the UA logo), the only circuit difference between the two was the ad-
dition of a +3 dB setting to the 10 kHz High Shelf EQ.
The UA 610-A plug-in models the vintage 610-A module in the original Wally
Heider “Green Board” console.
Modern 610-B The 610-B is the modern Universal Audio preamp design used in our popular
hardware products such as the 2-610, LA-610mkII, and 6176.
The UA 610-B plug-in is modeled from the Universal Audio 2-610 Dual Chan-
nel Tube Preamplifier hardware, including all the expanded features opti-
mized for modern use.
In Use A primary use for either 610 plug-in is for individual vocal or instrument tracks
where colorful tube character and broad EQ strokes are desired. The 610 is
widely used as a vocal, bass, horn or strings channel by many modern users,
but it sounds great on any source signals, as proven by over five decades of
record making.
Tonal Range From clean to clipped, with a broad sweet spot between, extreme tonal flex-
ibility is possible with the 610-A and 610-B. The input and output circuits
each have their own tube-driven gain stage, and because each stage imparts
its own color, many variations can be obtained by tuning the I/O gain struc-
tures. The UA 610 equalizers can also add lots of flavor. Because the EQ has
a feedback-style design, it effects the distortion characteristics of the output
stage.
UAD Powered Plug-Ins Manual - 539 - Chapter 56: UA 610 Tube Preamp & EQ Collection
Control The UA 610-A and UA 610-B plug-ins (Figure 168 on page 538) have simi-
Differences lar controls and layouts.
For some parameters, the function of these controls is identical for both plug-
ins. In the parameter descriptions below, controls and/or descriptions that
are common to both plug-ins are detailed at the top of each control name sec-
tion.
Any differences and/or controls that are unique to each specific plug-in are
detailed after the common description.
Presets The UA 610 plug-ins include presets in the internal factory bank which are ac-
cessed via the host application’s preset menu. The presets are also copied to
disk by the UAD installer so they can be used within Apollo’s Console appli-
cation. The presets can be loaded using the Settings menu in the UAD Toolbar
(see “Using UAD Powered Plug-Ins” in Chapter 7 of the UAD System Manual).
UA 610 Latency The UA 610 plug-ins use an internal upsampling technique to achieve sonic
design goals. This upsampling results in a slightly larger latency (55 samples;
85 samples at 176.4 and 192 kHz) than non-upsampled UAD plug-ins. These
additional samples are automatically compensated by modern host DAWs.
See “Upsampled Plug-Ins” on page 550 for more information.
Unison™ The UA 610 plug-ins feature Unison mic preamp technology integra-
Integration tion with the mic preamp hardware in Universal Audio’s Apollo au-
dio interfaces. With Unison, Apollo’s ultra-transparent mic preamps
inherit all of the unique sonics, input characteristics, and features of the 610
hardware preamps, including the mic, line, and Hi-Z inputs.
Note: Unison is active only when the plug-ins are inserted in the unique IN-
PUT insert within Apollo’s Console application. For complete Unison details,
see the Apollo Software Manual.
UAD Powered Plug-Ins Manual - 540 - Chapter 56: UA 610 Tube Preamp & EQ Collection
Hardware Input Impedance
All Apollo mic preamps feature input impedance switching in analog hard-
ware that can be physically switched by Unison plug-ins for physical, micro-
phone-to-preamp resistive interaction. This impedance switching enables
Apollo’s preamps to physically match the emulated unit’s input impedance,
which can significantly impact the sound of a microphone. Because the elec-
trical loading occurs on input, prior to A/D conversion, the realism is faithful
to the original target hardware preamp.
Apollo’s front panel preamp knob can independently adjust all gain and level
parameters available within the Unison plug-in via Gain Stage Mode. The
gain stage being adjusted can be remotely switched via Apollo, so multiple
gain levels and their associated colorations can be tuned from the hardware
knob for precise physical tactile control, all without using the Unison plug-in’s
software interface.
UAD Powered Plug-Ins Manual - 541 - Chapter 56: UA 610 Tube Preamp & EQ Collection
Input Level Controls
Input levels for the UA 610 plug-ins are controlled by the overall combination
of the input select, pad, and gain controls available within each plug-in.
These parameters, which vary per model, control the first tube gain stage in
the plug-ins. Generally speaking, higher input gains will produce more color
in the signal.
Input Select The 610 hardware has both mic and line level inputs. The Input Select control
switches between the “virtual input jacks” in the emulated models.
In most mic preamplifiers (including the 610), the difference between the mic
and line inputs is simply that the line input is attenuated before entering the
preamp circuitry. The gain circuits are not different for the mic and line inputs.
Line
When set to Line, it’s as if the DAW signal is plugged into the line level input
of the emulated 610 hardware. Less tube gain is applied, and a cleaner
sound is obtained.
Mic
When set to Mic (with UA 610-B, the 500 and 2.0K settings), it’s as if the
DAW signal is plugged into the microphone input of the emulated 610 hard-
ware and approximately 30 dB of additional (unattenuated) tube gain is ap-
plied. Since the incoming signal in from the DAW is already at line level, this
mode will more readily result in the tube color, saturation, and/or clipping as-
sociated with overdriving the input.
Important: Use caution when switching to Mic from Line, as signal output
levels can increase significantly (as they would with a hardware preamp).
UA 610-A
Mic and Line inputs are available. The mic input impedance of the
610-A hardware is 600Ω.
UA 610-B
Mic and Line inputs are available, with the additional availability
of input impedance selections for the Mic input. The Mic input can
be switched to 500Ω or 2KΩ; the different input impedances have
subtle effects on the signal color and response.
UAD Powered Plug-Ins Manual - 542 - Chapter 56: UA 610 Tube Preamp & EQ Collection
Unison Impedance
Note: For complete Unison details, see the Apollo Software Manual.
Input Pad/Gain In addition to the Input Select switch, both plug-in models have Pad and Gain
parameters that control the signal level at the tube input stage.
The Pad controls are used to attenuate incoming signals for less coloration,
while the Gain controls increase the signal level for more tube color.
Note: Like the original hardware, values on the control labels may not match
actual measured values.
UA 610-A
Input Gain
Important: Use caution when switching 610-A Gain from LOW to HI, as
signal output levels could jump dramatically.
Input Pad
Additional attenuation for the Mic input is available via the two-posi-
tion Pad switch. Setting the switch to the “–20” (up) position attenuates
the Mic signal at the tube input stage by –20 dB. In the down position,
no attenuation is applied.
Note: The 610-A Input Pad is not available for line input.
UAD Powered Plug-Ins Manual - 543 - Chapter 56: UA 610 Tube Preamp & EQ Collection
UA 610-B
Input Gain
Input Pad
Additional attenuation for the Mic input is available via the two-position
Pad switch. Setting the switch to the “–15” (up) position attenuates the
Mic signal at the tube input stage by –15 dB. In the down position, no
attenuation is applied.
Note: The 610-B Input Pad is not available for line input.
Tip: Click the “0” label text above the control to return Output to 0 dB.
UAD Powered Plug-Ins Manual - 544 - Chapter 56: UA 610 Tube Preamp & EQ Collection
EQ
The UA 610 preamps feature high and low frequency boost/cut shelving fil-
ters with stepped gain controls. The equalizers utilize a feedback-style design
which effects the distortion characteristics of the output stage.
UA 610-A
Lo EQ Gain
This rotary switch determines the amount of boost or cut applied to the low fre-
quency signal. Fixed values of ±6 dB or 0 dB can be selected. When set to
0 dB, the filter is inactive.
UA 610-B
Lo EQ Frequency
Note: Like the hardware, low frequency values are not consecutively or-
dered.
Lo EQ Gain
This rotary switch determines the amount of boost or cut applied to the low fre-
quency signal. Fixed values of plus or minus 9, 6, 4.5, 3, or 1.5 dB can be
selected. When set to 0 dB, the filter is inactive.
High EQ UA 610-A
Hi EQ Gain
This rotary switch determines the amount of boost or cut applied to the high
frequency signal. Fixed values of –6, 0, +3, or +6 dB can be selected. When
set to 0 dB, the filter is inactive.
UAD Powered Plug-Ins Manual - 545 - Chapter 56: UA 610 Tube Preamp & EQ Collection
UA 610-B
Hi EQ Frequency
Note: Like the hardware, high frequency values are not consecutively or-
dered.
Hi EQ Gain
This rotary switch determines the amount of boost or cut applied to the high
frequency signal. Fixed values of plus or minus 9, 6, 4.5, 3, or 1.5 dB can be
selected. When set to 0 dB, the filter is inactive.
Polarity This switch inverts the polarity (“phase”) of the signal. The signal
polarity is inverted when the switch is in the up position. Polarity
is normal when the switch is in the down position. Polarity inver-
sion can help reduce phase cancellations when more than one microphone is
used to record a single source.
Power is useful for comparing the processed settings to the original signal.
610 History
Creating an original 610 desk meant buying the individual modules and
building the console from scratch, as no complete consoles were ever sold
commercially. However, Bill Putnam himself built a few full-fledged desks for
his own studios, complete with fabricated frame, power supply, metering,
and buss/effects routing options.
UAD Powered Plug-Ins Manual - 546 - Chapter 56: UA 610 Tube Preamp & EQ Collection
Although very few desks were built from 610 modules, their contribution to
the history of recorded music is enormous. Ray Charles, Frank Sinatra and
The Beach Boys were a few artists captured with the 610 at United/Western
as part of landmark recordings such as “Sounds in Country and Western Mu-
sic,” “Strangers In The Night,” and “Pet Sounds,” respectively.
One of these 610 desks is the famous Wally Heider “Green Board.” This ex-
tremely well-built example was originally fabricated by Frank DeMedio for
Wally Heider’s Remote Recording Service in the early ‘60s. Wally originally
handled many of the live recording dates booked by Putnam. This console re-
corded and mixed some of the greatest performances of the era, from many
live shows with the “Rat Pack,” to recording the very last concert under the ba-
ton of Igor Stravinsky in Los Angeles.
With the Wally Heider Green Board alone, the list of records using the 610
is staggering. Here are but a few notable acts recorded with the Green
Board: Duke Ellington, Elvis Presley, Johnny Cash at Folsom Prison, Fats Dom-
ino, Little Richard, Cream, The Beach Boys, The Doors, Janis Joplin with Big
Brother & The Holding Company, The Who, The Grateful Dead, The Steve
Miller Band, Moby Grape, The Byrds, Jefferson Airplane, Booker T. & the
M.G.s, Otis Redding, Eric Burdon and The Animals, Simon and Garfunkel,
and The Jimi Hendrix Experience (live at the Monterey Pop Festival, where he
first set his guitar on fire!).
In the early ‘70s, long before this one-of-a-kind desk's historical significance
could be anticipated, Neil Young bought the 12-channel board from Wally
Heider. Young immediately moved it to his Broken Arrow Ranch. He installed
the desk in his barn, which he used as a recording studio, and employed it to
record his seminal record “Harvest” and may other classic albums. The Green
Board remains at Broken Arrow Ranch, and is still in use today.
UAD Powered Plug-Ins Manual - 547 - Chapter 56: UA 610 Tube Preamp & EQ Collection
The original Wally Heider “Green Board” console
containing 12 vintage UA 610-A preamplifier modules
UAD Powered Plug-Ins Manual - 548 - Chapter 56: UA 610 Tube Preamp & EQ Collection
CHAPTER 57
If this latency is not compensated, the processed audio will not be perfectly
aligned (synchronized) with unprocessed audio. Fortunately, modern audio
plug-in host applications automatically compensate for this latency by simply
enabling the delay compensation function in the preference settings. Most
hosts provide full plug-in delay compensation throughout the entire signal
path, including inserts, sends, groups/buses, and outputs
Realtime UAD With Universal Audio’s Apollo lineup of high-resolution audio interfaces,
Processing with there is no buffering latency on input because the plug-in processing occurs
Apollo
on input within the interface itself (the data does not need to be shuttled to the
DAW and back).
Latency compensation has various names depending on the host. It’s usually
referred to as “Automatic Delay Compensation” (ADC), “Plug-In Delay Com-
pensation” (PDC) or a similar related name.
Upsampled Plug-Ins
Some UAD plug-ins use an internal sample rate of 192 kHz to achieve sonic
design goals. This upsampling results in a slightly larger latency than other
UAD plug-ins (typcially 0 – 300 samples, depending on the plug-in and sam-
ple rate). Therefore, they require more compensation to remain perfectly syn-
chronized with other tracks.
Upsampled • Compensating for upsampled UAD plug-ins is not required when these plug-
Compensation ins are used for program material on the output bus, where latency is not a
Notes
consideration (because the entire mix is delayed by the same amount).
• The latency in Table 35 on page 551 is also produced when LiveTrack
mode is used with upsampled plug-ins.
• Upsampled plug-in latency cannot be displayed in the “Plug-In Latency” sec-
tion within the UAD Meter & Control Panel application due to technical lim-
itations.
• The Precision Multiband and Ampex ATR-102 plug-ins have a significantly
larger latency than other upsampled plug-ins because of their complex al-
gorithms. Because manually compensating for these plug-ins in hosts that
don’t support full plug-in delay compensation can be complicated, to avoid
timing errors in these hosts we generally recommend using these plug-ins
only on outputs, so no manual compensation is required.
Note: Use the Precision Multiband and Ampex ATR-102 only on outputs (as
their design was intended), or only in hosts that have full plug-in delay com-
pensation.
For example, when the plug-in is in Delay program mode and set with zero
delay time and predelay values, the plug-in output will not be completely can-
celled when mixing with flipped phase against an unprocessed track; high
frequencies will leak through. However, the latency through the dry side of the
wet/dry mix, and the latency when the plugin is bypassed via the EMT 250
Power switch, do not have this issue and will be fully compensated by the
DAW.
Realtime latency is displayed in the System Information panel within the UAD
Meter & Control Panel application.
Live processing latency is determined by the audio interface I/O buffer size
setting. The lower the buffer size, the lower the latency.
UAD-2 PCIe UAD-2 PCIe cards and UAD-2 Satellite Thunderbolt use an advanced buffer-
LiveTrack Mode ing architecture that delivers no additional latency when tracking by using
LiveTrack Mode. See “LiveTrack Mode” in the UAD System Manual for de-
tails.
M N
Manley Massive Passive EQ 225 Neve 1073 Equalizer 266
Manley Variable Mu Controls 243 Neve 1073 Latency 302, 400
Manley Variable Mu Limiter Compressor 238 Neve 1073 Screenshot 267, 294
Manual Conventions 17 Neve 1073SE 278, 302
Massive Passive Controls 228 Neve 1073SE Controls 302
Massive Passive EQ 225 Neve 1081 Band Layout 281
Massive Passive Latency 235 Neve 1081 Controls 184, 196, 281, 306, 358, 367
Massive Passive Mastering EQ 227 Neve 1081 Equalizer 280
Massive Passive Notes 235 Neve 1081 Latency 286
Master 77 Neve 1081 Screenshot 183, 195, 280, 305
Master Level Knob 77 Neve 1081SE 286
Materials Blending 112 Neve 1081SE Controls 181, 286
Materials Blending Bars 112 Neve 31102 Console EQ 287
Materials Menus 111 Neve 31102 Controls 288
Materials Panel 110 Neve 31102 Latency 292
Materials panel 106 Neve 31102 Screenshot 287
Meter 536 Neve 31102SE 291
Meter Pop-up Menu 94 Neve 31102SE Controls 291
Microphones 321 Neve 33609 Compressor 293
Mix 118, 398 Neve 33609 Controls 295
Mix Knob 139 Neve 33609 Screenshot 294
Mod Depth 138 Neve 33609SE 302
U
UA 1176 Classic Limiter Collection 526
UA 1176 Limiter Collection 528
UA 1176 Screenshots 527
UA 610 Screenshots 538
UA 610 Tube Preamp & EQ Collection 537
UA 610-B Controls 542
UAD Nomenclature 15
Upsampled Plug-Ins 550
Upsampling Values Table 551
Users Forum 16
Using Powered Plug-Ins 549
V
Variable Mu 238
Variable Mu Overview 239
Video Documentation 16
VU Meter 453
W
Welcome 14