Professional Documents
Culture Documents
MiniLab Series Brochure
MiniLab Series Brochure
Maximize
machine
uptime
Extend
oil drains
Prevent
premature
failures
In-service Oil Analysis for Machine Condition Monitoring
Since the reliable operation of high value, fixed assets is critical to all industrial plants,
predictive maintenance programs are implemented to manage machinery uptime.
In-service oil analysis is a key machine condition monitoring technique for Condition
Based Maintenance (CBM) and Reliability programs. It complements vibration
analysis, thermography and other predictive maintenance technologies. In the time
it takes external laboratories to return oil sample results, machinery condition can
change significantly. On-site oil analysis eliminates this wait and enables immediate
decision making.
Corrosion and wear cause surface degradation of the lubricated surfaces in
machinery and are the root causes of most mechanically-induced equipment
downtime. Corrosion is caused by water or other fluids reacting with metal surfaces,
while wear is caused by surface abrasion, adhesion and fatigue.
Oil analysis provides early indications of equipment wear and identifies the root
causes of corrosion.
ONSET OF
FAILURE
OPTIMAL
WORKING
The P-F Curve (Potential- CONDITION
Failure Curve) illustrates
EQUIPMENT
how in-service oil analysis
EQUIPMENT CONDITION
FAILS
provides critical information
on machine condition in both
Proactive and Predictive PROACTIVE PREDICTIVE
Maintenance periods. MAINTENANCE MAINTENANCE
Monitor Oil Condition Monitor for
& Contamination: Abnormal Wear:
In the Proactive period, oil
• Viscosity, oil chemistry, water • Total ferrous
condition and contamination
• Particle count with ISO codes • Wear particle analysis
monitoring help prevent the • Elemental analysis of • Elemental analysis
onset of the root causes normal wear particles
of machine failure. In the • Total ferrous
Predictive period, monitoring FAILURE
COST TO REPAIR
2 | Industrial Solutions
As part of a proactive maintenance program, on-site oil analysis
delivers rapid results with immediate decision making to:
n Lower operating costs
n Reduce unscheduled downtime
n Increase machine availability
Industrial Solutions | 3
MiniLab Series
4 simple tests and less than 15 minutes
to comprehensive oil analysis
Can be operated on-site by plant staff; no chemist required.
ELEMENTAL ANALYSIS
The elemental analyzer provides
measurement of 24 elements to
identify individual contaminants,
wear metals and the elemental
composition of additives.
PARTICLE COUNT
AND FERROUS MONITOR
The direct imaging particle counter and
ferrous monitor provides particle counts
and ISO codes, wear classification,
ferrous particle counts & size distribution,
and total ferrous measurement.
VISCOSITY
The portable viscometer provides
high accuracy 40°C kinematic
viscosity measurements.
4 | Industrial Solutions
Trivector reports on
machinery health
Easy to interpret results with Trivector sample
and trend reports.
CHEMICAL ANALYSIS
The infrared spectrometer
measures Total Acid Number
(TAN), oxidation and water for
machinery oils and hydraulics.
Industrial Solutions | 5
MiniLab Series Software
The TruVu 360 software is a browser-based platform installed on a company network, a
local PC or accessed using the Spectro Scientific Cloud Hosting Service. The TruVu 360
Device Console can be installed on a local PC along with the MiniLab instrument software.
TruVu 360 delivers a best practice for the on-site oil analysis process and it provides
performance dashboards at the asset, plant and corporate level.
It unifies asset trending of oil condition, chemistry and machinery wear with automated
diagnostics and recommended maintenance actions, and it provides maintenance and oil
savings tracking for assets.
The Diagnostics Sets can be adapted to users’ asset requirements including both
automatic diagnostics or user editable functions at the individual asset level.
6 | Industrial Solutions
1 Sample list 2 Test 3 Upload 4 Trivector chart
from TruVu 360 test results from rules engine
Instrument Results
Control Display
Reports
Trend reports are automatically generated including
observations and recommended actions based upon
alarm limit sets employed. Manual review and edits can
be made before report release and automatic distribution.
TruVu 360 report TruVu 360 trending chart and historical sample data
Industrial Solutions | 7
MiniLab Evolution
5200 MiniLab vs MiniLab 153
The MiniLab Series is the next generation of Trivector on-site oil analyzers replacing the 5200 MiniLab.
PARTICLE COUNT
FLUIDS ELEMENTAL CHEMISTRY & FERROUS VISCOSITY
Mineral oil based Hydraulic fluids and lubricants Y Y Y Y
Synthetic hydrocarbon based hydraulic fluids and lubricants Y Y Y Y
Ester-based Lubricant blends Y Y Y Y
Oil Soluble Polyglycols (OSP) Y Y Y Y
Organic Esters (OE) Y Y Y Y
Phosphate Esters (Fyrquel/Skydrol) Y Y Y 1
Y
Polyalkylene Glycols (PAG) Y Y Y 1
Y
Poly Alpha Olefins (PAO) Y Y Y Y
Polyinternal Olefins Y Y Y Y
Polyol Esters (POE) Y Y Y Y
Grease Y Y2 N N
Mineral Transformer Oil Y N Y Y
1: Require factory installed Skydrol tube and fitting kits and compatible solvent 2: Oxidation and water (absorbance units) for trending
8 | Industrial Solutions
Typical limits for machinery
Factory libraries of component types, reference oils and alarm limits are provided and additional parameters and limits can be added by the user.
Establish constant wear rate Dynamic equilibrium levels Dynamic equilibrium levels Dynamic equilibrium levels
Oil change interval Reaches limit level NA NA NA
Onset of corrossive wear Increase in rate No change No change No change
Transition into abnormal wear mode Increase in rate Increase Increase Increase – cutting/sliding/fatigue
Ongoing severe wear mechanism Same or decrease in rate Increase Increase Increase – cutting /sliding/ fatigue
(breakdown shear mixed layer)
Temporary wear rate change due Increase in rate No change No change No change
to increased load and speed
Onset of external contamination No change No change Increase Increase – non-metallic
3 Body abrasive mechanism iron No change Increase Increase Increase – cutting/sliding
Industrial Solutions | 9
› Wear particle
Elemental Analysis
by metal type
› Contamination The SpectrOil 100 Series analyzes small particulate wear, lubricant additives and
ID by source contaminants for trace quantities of elements dissolved or suspended as fine particles.
› Oil additive Using the proven rotating disc electrode (RDE) technique, the SpectrOil 100 Series has
levels become the workhorse of industrial, commercial and military oil analysis laboratories
requiring rapid analysis of wear metals, contaminants and additives in lubricants.
Coolant, wash-down water and JOAP calibrations are available in addition to in-
service lubricating oil and hydraulic fluid analysis.
n Measures ppm levels of up to 32 elements in less than 30 seconds
n Easy to operate – no sample preparation, gases, coolants or solvents needed
n Compliant with ASTM D6595 for used oil analysis
Grating
On-site oil analysis provides greater
Exit Slits
insight into contaminant sources by
linking elemental parameters with the
probable source:
10 | Industrial Solutions
Particle Count and Ferrous Monitor
› Ferrous content
The LaserNet 200 Series provides particle counts and codes, large wear particle › Wear particle shape
classification and ferrous wear monitoring. › Particle count
and codes
n Particle count, size distribution and codes (ISO 4406, NAS 1638, NAVAIR 01-1A-17,
SAE AS 4059, GOST, ASTM D6786, HAL, and user defined bins)
n Differentiates contaminants (silica and fibers from machine wear metal)
n Classifies wear particles, stores images, and reports particle count for each wear
Options include configurations without the ferrous monitor and wear classification.
Large Ferrous
ppm FILTER SCREEN
FATIGUE
x4 Lens Actual Pixel NON METALLIC
Resoluion WATER
Industrial Solutions | 11
› Water Chemical Analysis
› TAN
› TBN The FluidScan® 1000 Series oil chemistry analyzer determines when in-service oil is no
› Oxidation longer fit for use due to oil degradation or the ingress of water or glycol. It is fast and easy to
› Nitration use, with just one drop of oil needed for the sample and less than one minute for test results.
› Sulfation
› Soot The analyzer includes an extensive oil library; additional oils can be added by the user.
› Additive depletion n Compliant to ASTM D7889 “Standard Test Method for Field Determination of In-service
› Glycol
Fluid Properties Using IR Spectroscopy”
n High correlation to TAN and TBN laboratory tests conducted with ASTM D664 and D4739
12 | Industrial Solutions
Viscosity › Viscosity
The MiniVisc 3000 Series provides fast, accurate 40°C kinematic viscosity measurements for
easy detection of viscosity variations caused by contamination, mix-up and oil degradation.
n Solvent free, portable, and easy to use
n Viscosity range 1-700 cSt @40°C
n Accuracy +/- 3% to NIST viscosity standards
Open the two parallel plates for easy cleaning. MiniVisc 3000 Series kinematic viscometer schematic
The MiniLab 33 includes the FerroCheck, a portable ferrous analyzer that measures the
total ferrous content of a sample. It is easy to operate; simply insert the sample vial with
fluid sample to measure.
n Small sample requirement with results in 30 seconds
n No sample preparation and no solvents required to clean
n Measurement range 0-10,000 ppm for oil, 10-150,000 ppm for grease
Industrial Solutions | 13
Four MiniLab Options. Which One is for You?
MiniLab 153 – provides a complete oil analysis report
with elemental analysis, comprehensive wear particle
analysis, solid and water contamination, fluid chemistry
and viscosity. It is ideal for large power plants and
manufacturing plants with many assets.
MiniLab 153 – 4 tests
MiniLab 53 – provides a Trivector report with
comprehensive wear particle analysis, solid and water
contamination, fluid chemistry and viscosity.
MiniLab 33 – provides a basic Trivector report with total
ferrous wear, fluid chemistry, water in oil and viscosity.
MiniLab 53 – 3 tests
MiniLab 23 – provides basic oil condition information
including viscosity, chemistry and water in oil.
MiniLab 33 – 3 tests
MiniLab 23 – 2 tests
14 | Industrial Solutions
ANALYTICAL RANGE AND REPEATABILITY
OUTPUT ANALYTICAL RANGE REPEATABILITY
Validation Standards and ASTM Standards
Particle count and size distribution: ISO codes per 4402/4406, Particle count 4-100 µm ≤ 6% RSD
other codes selectable
Validation standards are supplied for all
Large Ferrous, ppm 0.02-5 ppm ≤ 5% RSD
MiniLab Series instrumentation. These NIST
Total Ferrous, ppm 10-2,000 ppm ≤ 5% RSD
traceable standards support internal quality
Wear particle counts by mode: fatigue, sliding, cutting, 20-100 µm
non-metallic, fibers
programs and compare current instrument
40°C Kinematic viscosity, cSt 1-320 cSt at 40°C ≤ 3% RSD
performance against factory calibration.
320-700 cSt at 40°C ≤ 5% RSD All instruments in the MiniLab Series have an
Total Acid Number (TAN), mg KOH/g 0-6 mg KOH/g ≤ 3% RSD associated ASTM Standard Test Method.
Total Base Number (TBN), mg KOH/g 0-70 mg KOH/g ≤ 3% RSD
Oxidation, abs/0.1 mm 0-150 ≤ 3% RSD
Nitration, abs/cm 0 -50 ≤ 3% RSD
Sulfation, abs/0.1 mm 0-75 ≤ 3% RSD
Fluid Integrity Index, varies by oil ≤ 3% RSD
Water, dissolved, ppm 100 ppm-saturation* ≤ 3% RSD
Water, free, ppm 0.03-6.5% (300-65,000 ppm) ≤ 25% RSD
Elemental concentration of 23 elements, ppm Elemental analysis range and repeatability
vary with element
*Oil specific. RSD = Relative Standard Deviation.
Sample preparation equipment such as the homogenizer, Spectro Scientific consumables are selected
ultrasonic deaerator, electrode sharpener and and carefully tested with all Spectro
consumables for 100 samples is included with each Scientific instruments to ensure consistent,
MiniLab 153 Standard Accessories Kit. repeatable results. Always use
SAMPLE PREPARATION – 3 SIMPLE STEPS
Spectro Scientific certified
consumables
1. Sharpen electrode
for best
2. Homogenize the sample for water measurement
results.
3. Ultrasonically degas the sample for particle analysis
Industrial Solutions | 15
MiniLab Series Product Information
For MiniLabs with TruVu 360 Basic, software is provided in a USB/DVD media pack.
For MiniLabs for TruVu 360 Hosted Service, Hosting service and User Licenses are ordered separately.
AMETEK Spectro Scientific | One Executive Drive, Suite 101, Chelmsford, MA 01824-2563
978-431-1120 | www.spectrosci.com | [email protected] | An ISO 9001:2015 company
Copyright © 2018 Spectro Scientific. All rights reserved. While every effort is made to assure the information in this document is accurate, Spectro Scientific does
not accept liability for any errors or mistakes that may arise. Specifications are subject to change without notice.
Industrial_BRv3_2019-04-05