DIMENSIONS & WEIGHT (MASS) 150W MF/HF

RADIOTELEPHONE JSB-196GM RADIOTELEPHONE

（294）

260

95
25 200 （25）

4-ø7
Installation Holes
JSB-196GM
警 告 WARNING 警 告 WARNING
このカバーをはずすな
感電のおそれあり
このカバーをはずすな
感電のおそれあり
REAR VIEW
HIGH VOLTAGE HIGH VOLTAGE
DO NOT REMOVE DO NOT REMOVE
THE COVER. THE COVER.

RADI OTE LE P HONE

MODEL JSB-196GM
SERIAL NO.
91

MADE IN JAPAN

C O M PA S S S A F E D I S TA N C E 1 . 5 m

Selectable 3 Steps Installation Angle

(Horizontal,7.5°,15°)
PANEL Size 100

（165.6）
(103.4)
(122.7)

PANEL Size 250

(253.4)
(297.4)

weight (Mass) : approx. 7.4kg

DSC/NBDP MODEM NCT-196N

ＰＯＷＥＲ ＤＭＣ ＡＮＴ

ＤＴＥ １ ２ ３ ４ ５ ６ ７ ８ ９ １０

ＦＵＳＥ ＧＮＤ
７．５Ａ ７．５Ａ

ＰＲＩＮＴＥＲ
260

１３．６Ｖ
ＴＲＸ／ＮＭＥＡ
ＤＣ１３．６Ｖ ＋ − ＰＲＩＮＴＥＲ ＴＲＡＮＳＣＥＩＶＥＲ １ ２ ３ ４ ５ ６ ７

警告 WARNING
このカバーをはずすな
感電の恐れあり
HIGH VOLTAGE
DO NOT REMOVE
THE COVER.

ＤＳＣ／ＮＢＤＰ ＭＯＤＥＭ
MODEL ＮＣＴ−１９６Ｎ
SERIAL No.

MADE IN JAPAN

4-Ｍ6

ＳＣＡＮ ＤＩＭ ＰＲＩＮＴ

ＮＣＴ−１９６Ｎ ＤＳＣ／ＮＢＤＰ ＭＯＤＥＭ １ ２ ３
ＱＵＩＴ ＰＯＳ ＦＲＥＱ
PANEL Size 100

４ ５ ６
ＳＡＶＥ
７ ８ ９
（103.4）

ＣＬＲ ０ ・

ＦＵＮＣ ＭＥＮＵ ＥＮＴ

１ｓｔ：ＰＲＥＳＳ ＴＯ ＶＥＲＩＦＹ／ＥＤＩＴ ＭＥＳＳＡＧＥ
２ｎｄ：ＰＲＥＳＳ ＆ ＨＯＬＤ ＵＮＴＩＬ ＢＥＥＰ
ＳＯＵＮＤＳ ＣＯＮＴＩＮＵＯＵＳＬＹ
ＤＩＳＴＲＥＳＳ ＦＲＥＱＵＥＮＣＹ
ＤＩＳＴＲＥＳＳ ２１８７．５ｋＨｚ ＡＬＭ／ＣＡＬＬ
２１８７．５ｋＨｚ ８４１４．５ｋＨｚ
50

ＵＲＧＥＮＣＹ
ＳＴＯＰ ＣＡＬＬ
ＯＴＨＥＲＳ ４２０７．５ｋＨｚ １２５７７．０ｋＨｚ
DISTRESS
８４１４．５ｋＨｚ
６３１２．０ｋＨｚ １６８０４．５ｋＨｚ

ＣＬＡＳＳ Ａ ＤＳＣ ＣＯＭＰＡＳＳ ＳＡＦＥ ＤＩＳＴＡＮＣＥ １．５ｍ

PANEL Size 250 91 95 （74）

（253.4）

weight (Mass) : approx. 6.3kg

● Specifications may be subject to change without notice. For further information, contact:

●Simple installation on small ship

Since 1915 URL eng
●High expandability
Main Office: Fujisawa bldg. 30-16, Ogikubo 4-chome
Suginami-ku, Tokyo 167-8540, Japan
Telephone: +81-3-6832-1816 ●Easy operation
Facsimile: +81-3-6832-1845
●Digital signal processing (DSP)
Overseas Branches : Seattle, Amsterdam, Athens, Manila
Liaison Offices : Taipei, Jakarta, Singapore, Hanoi,
Shanghai, Hamburg, New York

28EM ISO9001，ISO14001 Certified

2000.8 2009.8 CAT.No.Y7-63（No.214-10-3）A Printed in Japan
 The JSB-196GM MF/HF Radiotelephone is a new generation of economical
marine transceiver with high functionality designed to conform to the GMDSS A2
SPECIFICATION
area requirements. The JSB-196GM functions to fully meet the latest regulations for General Spurious response 60dB or better
frequency range Transmit: 1.6 to 27.5MHz Clarifier range: ±200Hz in 1Hz steps
maritime MF/HF communications by connecting the NCT-196N DSC/NBDP MODEM Receive: 0.1 to 29.9999MHz AF output 5.0W max. 1W rated
with a built-in watchkeeping receiver. Frequency increments 100Hz Line output: 600 Ω, 0dBm (balanced)
Frequency tolerance ±10Hz or better
NFC-196 ANTENNA TUNER
The radiotelephone system consisting of the JSB-196GM that covers the frequency User definable channels 200ch (20ch x 10 Groups)
Frequency range 1.6 to 30MHz
Emissions mode J3E(TEL), F1B(DSC/TLX), A1A(CW),
range of 1.6 to 27.5MHz and the NCT-196N DSC/NBDP MODEM with an internal H2B, H3E(AME:reception only)
Power capability 200Wpep
DSC watchkeeping receiver conforms to the applicable regulations including the Preset ITU channels 1722ch (TEL:283, DSC:29,
SWR after tuning 2:1
Turning time Automatic tuning: typical 3 sec
IMO performance standard and the national standard. TLX:891, CW:519)
Preset tuning: typical 0.5 sec
Scanning channel 20 user defined channels
Operating temperature -30˚C to +60˚C
Communication mode Simplex and semi-duplex
Power requirement 10.2VDC to 16.2VDC, negative-
Operating temperature -15˚C to +55˚C grounded ,1.5A (max)
Power requirement 13.6VDC±10% (12.3VDC to Dimensions and mass 230mm(W) x 380mm(H) x 90mm(D)
FEATURES 15.0VDC), negative-grounded
Tx: 40 A max
Approx. 3.3kg
Rx: 2 A max NCT-196N DSC/NBDP MODEM
Simple installation on small ship (Operable between 10.2VDC Protocol ITU-RM.493-7, M.541-6 and M.1082
Each equipment is of very compact design for simple installation on small ship. The GMDSS-based and 16.2VDC) Modulation rate 100 baud
Compass safe distance 1.5m
system consists of the JSB-196GM MF/HF Radiotelephone, the NCT-196N DSC/NBDP MODEM Dimensions and mass 250mm(W) x 100mm(H) x 260mm(D),
Modulation accuracy Within ±30ppm
Terminal and a DC-DC converter. The main unit of the JSB-196GM and the NCT-196N can be Output frequency 1700Hz ±85Hz
Approx. 7.4kg
Frequency tolerance ±0.5Hz or better
integrated as a stacked system and installed in a easy-to-operate place on the bridge. TRANSMITTER Output level -20dBm to +10dBm
Output power 100Wpep (1.6 to 4MHz), Operating temperature -15 to +55˚C
● Easy operation 150Wpep (4 to 27.5MHz) Power requirement 10.2VDC to 16.2VDC, negative-
The JSB-196GM is designed for user-friendly operation using a single large control dial for frequency Occupied bandwidth J3E: 3kHz or better grounded, 3A max
channel selection, mode setting and high/low transmit power switching. The NCT-196N integrates the F1B, A1A: 0.5kHz or less Dimensions and mass 250mm(W) x 100mm(H) x 260mm(D)
Carrier suppression 40dB or better Approx. 6.3kg
DSC modem and the watchkeeping receiver in it, enabling operations to fully meet the GMDSS
Spurious suppression 43dB or better WATCH KEEPING RECEIVER
requirements. AF frequency responce 350 to 2700Hz (6dB bandwidth) Receiving system Double superheterodyne
Microphone input 600 Ω(-40dBm standard) Receiving frequencies 2187.5kHz, 4207.5kHz,
● Digital signal processing (DSP) Line input 600 Ω, 0dBm (balanced) 6312.0kHz, 8414.5kHz,
The JSB-196GM radiotelephone uses 32-bit floating point DSP for digital signal processing in and after RECEIVER
12577.0kHz,16804.5kHz
the IF stage. The DSP technology improves a number of functions including noise reduction and Receiving system Triple superheterodyne
Sensitivity Symbol error rate of 1% at
various types of interference rejection, ensuring enhanced performance. receiver input voltage of 1μV
Intermediate frequencies 70.455MHz, 455kHz, 20.217kHz
Antenna impedance 50 Ω
Sensitivity (SINAD 20dB) J3E: 6.3μV or better (1.6 to 4MHz)
3.5μV or better (4 to 27.5MHz)
F1B: 1.8μV or better (1.6 to 4MHz)
1.0μV or better (4 to 27.5MHz)

SYSTEM CONFIGURATION Selectivity J3E: 6dB bandwidh 2.4 to 3kHz,

66dB bandwidth Within±2.1kHz
F1B: 6dB bandwidh 270 to 300Hz,
60dB bandwidth Within±550Hz
Transmission/Reception DSC/NBDP MODEM
Antenna NCT-196N

STANDARD COMPONENTS
Antenna Tuner
NFC-196 WKR Antenna Component Model Quantity Remarks Component Model Quantity Remarks
MF/HF Radiotelephone JSB-196GM 1 DSC/NBDP MODEM NCT-196N 1
Included Accessories Included Accessories
Hand Set NQW-213 1 Power Cable 7ZCJD0139 1 L=3m
RF Cable (5m) Power Cable 7ZCJD0043A 1 L=1m AF Cable 7ZCJD0071 1 L=1.5m
Plug 5JWGC00004 1 Control Cable 7ZCJD0072A 1 L=1.5m
Connector 5JWGC00004 2 Terminals 5JTCD00220 2 1.25-8
Radiotelephone Terminals 5JDAH00084 2 14-8 Spare Fuse 5ZFCK00001 4 7-5A
JSB-196GM Spare Fuse 5ZFEX00013 4 40A Instruction Manual 7ZPJD0156 1 English
Control Cable (5m) DC13.6V Instruction Manual 7ZPJD0124 1 English Quick Reference 7ZPJD0157 1 English
Quick Reference 7ZPJD0141 1 English GMDSS Operating Guide 7ZPJD0135 1 English
DC-DC Converter
NBG-300
(option)
OPTION Component
Antenna Tuner
Model
NFC-196
Quantity
1
Remarks

DC24V power supply Component Model Quantity Remarks Included Accessories

DC-DC Converter NBG-300 1 ATU Control Cable 7ZCJD0044A 1 L=5m
Straight Cable ATU RF Cable 7ZCJD0045 1 L=5m
Hand Microphone NVT-133 1 (L=5m) Terminal 5JTCD00393 2 1.25-3
Hand Microphone NVT-140 1 Curl Cable Terminal 5JTCD00001 2 2-3
Handset Holder MPBP00127A 1 Terminal BRTE00395 2 5.5-3
For NCT-196N Washer BSFW06000B 2 W6Bs
AF Cable 7ZCJD0073 1 (L=0.3m)
For NCT-196N
Control Cable 7ZCJD0074 1 (L=0.3m)
Printer NKG-800 1 For NCT-196N
DIMENSIONS & WEIGHT (MASS) 150W MF/HF
RADIOTELEPHONE JSB-196GM RADIOTELEPHONE
（294）

260

95
25 200 （25）

4-ø7
Installation Holes
JSB-196GM
警 告 WARNING 警 告 WARNING
このカバーをはずすな
感電のおそれあり
このカバーをはずすな
感電のおそれあり
REAR VIEW
HIGH VOLTAGE HIGH VOLTAGE
DO NOT REMOVE DO NOT REMOVE
THE COVER. THE COVER.

RADI OTE LE P HONE

MODEL JSB-196GM
SERIAL NO.
91

MADE IN JAPAN

C O M PA S S S A F E D I S TA N C E 1 . 5 m

Selectable 3 Steps Installation Angle

(Horizontal,7.5°,15°)
PANEL Size 100

（165.6）
(103.4)
(122.7)

PANEL Size 250

(253.4)
(297.4)

weight (Mass) : approx. 7.4kg

DSC/NBDP MODEM NCT-196N

ＰＯＷＥＲ ＤＭＣ ＡＮＴ

ＤＴＥ １ ２ ３ ４ ５ ６ ７ ８ ９ １０

ＦＵＳＥ ＧＮＤ
７．５Ａ ７．５Ａ

ＰＲＩＮＴＥＲ
260

１３．６Ｖ
ＴＲＸ／ＮＭＥＡ
ＤＣ１３．６Ｖ ＋ − ＰＲＩＮＴＥＲ ＴＲＡＮＳＣＥＩＶＥＲ １ ２ ３ ４ ５ ６ ７

警告 WARNING
このカバーをはずすな
感電の恐れあり
HIGH VOLTAGE
DO NOT REMOVE
THE COVER.

ＤＳＣ／ＮＢＤＰ ＭＯＤＥＭ
MODEL ＮＣＴ−１９６Ｎ
SERIAL No.

MADE IN JAPAN

4-Ｍ6

ＳＣＡＮ ＤＩＭ ＰＲＩＮＴ

ＮＣＴ−１９６Ｎ ＤＳＣ／ＮＢＤＰ ＭＯＤＥＭ １ ２ ３
ＱＵＩＴ ＰＯＳ ＦＲＥＱ
PANEL Size 100

４ ５ ６
ＳＡＶＥ
７ ８ ９
（103.4）

ＣＬＲ ０ ・

ＦＵＮＣ ＭＥＮＵ ＥＮＴ

１ｓｔ：ＰＲＥＳＳ ＴＯ ＶＥＲＩＦＹ／ＥＤＩＴ ＭＥＳＳＡＧＥ
２ｎｄ：ＰＲＥＳＳ ＆ ＨＯＬＤ ＵＮＴＩＬ ＢＥＥＰ
ＳＯＵＮＤＳ ＣＯＮＴＩＮＵＯＵＳＬＹ
ＤＩＳＴＲＥＳＳ ＦＲＥＱＵＥＮＣＹ
ＤＩＳＴＲＥＳＳ ２１８７．５ｋＨｚ ＡＬＭ／ＣＡＬＬ
２１８７．５ｋＨｚ ８４１４．５ｋＨｚ
50

ＵＲＧＥＮＣＹ
ＳＴＯＰ ＣＡＬＬ
ＯＴＨＥＲＳ ４２０７．５ｋＨｚ １２５７７．０ｋＨｚ
DISTRESS
８４１４．５ｋＨｚ
６３１２．０ｋＨｚ １６８０４．５ｋＨｚ

ＣＬＡＳＳ Ａ ＤＳＣ ＣＯＭＰＡＳＳ ＳＡＦＥ ＤＩＳＴＡＮＣＥ １．５ｍ

PANEL Size 250 91 95 （74）

（253.4）

weight (Mass) : approx. 6.3kg

● Specifications may be subject to change without notice. For further information, contact:

●Simple installation on small ship

Since 1915 URL eng
●High expandability
Main Office: Fujisawa bldg. 30-16, Ogikubo 4-chome
Suginami-ku, Tokyo 167-8540, Japan
Telephone: +81-3-6832-1816 ●Easy operation
Facsimile: +81-3-6832-1845
●Digital signal processing (DSP)
Overseas Branches : Seattle, Amsterdam, Athens, Manila
Liaison Offices : Taipei, Jakarta, Singapore, Hanoi,
Shanghai, Hamburg, New York

28EM ISO9001，ISO14001 Certified

2000.8 2009.8 CAT.No.Y7-63（No.214-10-3）A Printed in Japan