Professional Documents
Culture Documents
Competency - Based Learning Materials: Sector
Competency - Based Learning Materials: Sector
Sector:
HEALTH, SOCIAL, AND OTHER COMMUNITY
DEVELOPMENT SERVICES SECTOR
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 1 of 41
Related to Work Activities Checked by: LCEST
HOW TO USE THIS COMPETENCY-BASED LEARNING MATERIALS
Welcome!
The unit of competency, “Solve Workplace Problem Related to Work Activities”, contains the
knowledge, skills and attitude required for identifying/determining fundamental cause of
problem. It is one of the BASIC competencies of BOOKKEPPING NC III.
In this module, you are required to go through a series of learning activities in order to
complete each learning outcome. In each learning outcome are Information Sheets, Self-
Checks, Task Sheets and Job Sheets. Follow and perform the activities on your own. If you
have you have questions, do not hesitate to ask for assistance from your facilitator.
Remember to:
Read information sheets and complete the self-checks. Suggested references are
included to supplement the materials provided in this module.
Perform the Task Sheets and Job Sheets until you are confident that your outputs
conform to the Performance Criteria Checklist that follows the sheets.
Submit outputs of the Task Sheets to your facilitator for evaluation and recording in
the Accomplishment Chart. Outputs shall serve as your portfolio during the
Institutional Competency Evaluation. When you feel confident that you have had
sufficient practice, ask your trainer to evaluate you. The results of your assessment
will be recorded in your Progress Chart and Accomplishment Chart.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 2 of 41
Related to Work Activities Checked by: LCEST
LIST OF COMPETENCIES
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 3 of 41
Related to Work Activities Checked by: LCEST
SUMMARY OF LEARNING OUTCOMES
LEARNING OUTCOMES: Upon completion of this module the students/trainees will be able
to:
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 4 of 41
Related to Work Activities Checked by: LCEST
DETAILS OF LEARNING OUTCOME
CONTENTS:
Observation, Investigation, and Analytical Techniques
Brainstorming
Cause and Effect Diagrams
PARETO Analysis
SWOT Analysis
GANT Chart
PERT CPM and Graph
SCATTERGRAMS
ASSESSMENT CRITERIA:
1. Importance and application of analytical techniques are explained
2. Analytical techniques such as brainstorming, cause and effects diagrams, PARETO
analysis, SWOT analysis, GANT chart, PERT CPM & graphs, and scatter grams are
defined
METHODOLOGIES:
Self-paced/modular
Discussion
Case Studies
ASSESSMENT METHODS:
Written test
Direct Observation
Interview
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 5 of 41
Related to Work Activities Checked by: LCEST
LEARNING EXPERIENCE
LEARNING OUTCOME 1: Explain the Analytical Techniques
1. Read Information Sheet No.4.1-1 on Explaining You may clarify with the
the Analytical Techniques facilitator if you have concerns
on the lesson.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 6 of 41
Related to Work Activities Checked by: LCEST
INFORMATION SHEET: 4.1-1
EXPLAINING THE ANALYTICAL TECHNIQUES
LEARNING OBJECTIVE/S:
There are many types of problems that can arise in the workplace. There are specific steps
for employers and employees to take to resolve these problems.
Observation
Observation is one tool for achieving innovative and creative solutions. Observing the
problem and watching it under different circumstances is one of the best ways to
understand a problem’s true nature.
Investigation
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 7 of 41
Related to Work Activities Checked by: LCEST
Making a decision without completing a reasonable investigation can make any subsequent
decisions or actions unfair, and leave an employer vulnerable to legal action.
Analytical Techniques
An analytical technique (analytical method) is a procedure or a method for the analysis of
some problem, status or a fact. Analytical techniques are usually time-limited and task-
limited. They are used once to solve a specific issue.
Basic and most widely used analytical methods / techniques include:
Brainstorming
Five basic principles are generally known. Their goal is to eliminate all restrictions
and alternatively stimulate the creation of new ideas:
A cause-effect diagram is a visual tool used to logically organize possible causes for a
specific problem or effect by graphically displaying them in increasing detail,
suggesting causal relationships among theories. A popular type is also referred to as
a fishbone or Ishikawa diagram.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 8 of 41
Related to Work Activities Checked by: LCEST
How to Construct a Cause and Effect Diagram
Define clearly the effect or symptom for which the causes must be identified. The
“effect” must be defined in writing. For additional clarity, it may be advisable to spell
out what is included and what is excluded.
Place the effect or symptom at the right, enclosed in a box. Draw the central spine as
a thicker line pointing to it
Each of the major causes (not less than two and normally not more than six) should
be worded in a box and connected with the central spine by a line at an angle of
about 70 degrees.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 9 of 41
Related to Work Activities Checked by: LCEST
Step 5: Add Causes to Main Area
Add causes for each main area. Each factor that is a cause of a main area is placed at
the end of a line that is drawn so that it connects with the appropriate main area line
and is parallel with the central spine
Check the logical validity of each causal chain. Once the entire C-E diagram is
complete, it is wise to start with each potential root cause and “read” the diagram
forward to the effect being explained. Be sure that each causal chain makes logical
and operational sense.
As discussed more fully in the interpretation section, check for the following:
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 10 of 41
Related to Work Activities Checked by: LCEST
The existence of one of these conditions does not automatically mean a defect in the
diagram; it merely suggests that further investigation is warranted.
PARETO Analysis
Here is a simple example of a PARETO diagram, using sample data showing the
relative frequency of causes for errors on websites. It enables you to see what 20%
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 11 of 41
Related to Work Activities Checked by: LCEST
of cases are causing 80% of the problems and where efforts should be focussed to
achieve the greatest improvement. In this case, we can see that broken links,
spelling errors and missing title tags should be the focus.
SWOT Analysis
Using internal and external data, the technique can guide businesses toward
strategies more likely to be successful, and away from those in which they have
been, or are likely to be, less successful.
Strengths describe the positive attributes, tangible and intangible, internal to your
organization. They are within your control.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 12 of 41
Related to Work Activities Checked by: LCEST
o What do you do well?
o What internal resources do you have? Think about the following:
o Positive attributes of people, such as knowledge, background, education,
credentials, network, reputation, or skills.
o Tangible assets of the company, such as capital, credit, existing customers or
distribution channels, patents, or technology.
o What advantages do you have over your competition?
o Do you have strong research and development capabilities? Manufacturing
facilities?
o What other positive aspects, internal to your business, add value or offer you
a competitive advantage?
Weaknesses are aspects of your business that detract from the value you offer or
place you at a competitive disadvantage. You need to enhance these areas in order
to compete with your best competitor.
o What factors that are within your control detract from your ability to obtain
or maintain a competitive edge?
o What areas need improvement to accomplish your objectives or compete
with your strongest competitor?
o What does your business lack (for example, expertise or access to skills or
technology)?
o Does your business have limited resources?
o Is your business in a poor location?
Opportunities are external attractive factors that represent reasons your business is
likely to prosper.
o What opportunities exist in your market or the environment that you can
benefit from?
o Is the perception of your business positive?
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 13 of 41
Related to Work Activities Checked by: LCEST
o Has there been recent market growth or have there been other changes in
the market the create an opportunity?
o Is the opportunity ongoing, or is there just a window for it? In other words,
how critical is your timing?
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 14 of 41
Related to Work Activities Checked by: LCEST
GANTT Chart
A Gantt chart is a project management tool assisting in the planning and scheduling
of projects of all sizes, although they are particularly useful for simplifying complex
projects. Project management timelines and tasks are converted into a horizontal
bar chart, showing start and end dates, as well as dependencies, scheduling and
deadlines, including how much of the task is completed per stage and who is the
task owner. This is useful to keep tasks on track when there is a large team and
multiple stakeholders when the scope changes.
As it's in a bar chart format it is possible to check on progress with a quick glance.
You can easily see:
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 15 of 41
Related to Work Activities Checked by: LCEST
PERT is a method of analyzing the tasks involved in completing a given project,
especially the time needed to complete each task, and to identify the minimum time
needed to complete the total project
The CPM (Critical Path Management) chart is similar to the PERT chart but includes
anexplicit indication of the “critical path”—that sequence of tasks that defines the
minimumamount of time for the project. Put another way, these are the tasks that a
delay withinwill delay the entire project. One or more sequences of such tasks
always exists; theCPM chart makes these paths (usually just one) explicit.
Otherwise, CPM shares thesame strengths andweaknesses as the PERT, and the two
are often lumped together asone technique.
SCATTERGRAMS
A scattergram, scatter diagram, scatterplot, scatter graph, or scatter chart is a type
of mathematical diagram using Cartesian coordinates to display values for two
variables for a set of data. Consists of an X axis (the horizontal axis), Y axis (the
vertical axis), and a series of dots. Each dot on the scattergram represents one
observation from a data set. The position of the dot on the scatterplot represents its
X and Y values.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 16 of 41
Related to Work Activities Checked by: LCEST
o Used to analyze patterns in bivariate(relate) data.
o Show the distribution of two variables in a population sample. Show the
behavior of the variables when they are accumulated
o The score or values of each sample are usually represented by dots on the
horizontal and vertical axis.
Example: Company α decides to use scatter graph method to split its factory
overhead (FOH) into variable and fixed components. Following is the data which is
provided for the analysis.
Solution:
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 17 of 41
Related to Work Activities Checked by: LCEST
References: https://archive.acas.org.uk/media/4483/Conducting-workplace-
investigations/pdf/Conducting_Workplace_Investigations.pdf
https://managementmania.com/en/analyses-analytical-techniques
https://www.juran.com/blog/the-ultimate-guide-to-cause-and-effect-
diagrams/
https://www.projectsmart.co.uk/pareto-analysis-step-by-step.php
https://articles.bplans.com/how-to-perform-swot-analysis/
https://www.apm.org.uk/resources/find-a-resource/gantt-chart/
https://github.com/nofaralfasi/PERT-CPM-graph
https://xplaind.com/800569/scatter-graph-method
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 18 of 41
Related to Work Activities Checked by: LCEST
SELF-CHECK NO. 4.1-1
EXPLAINING ANALYTICAL TECHNIQUES
Identification. Identify the following. Write your answer on the space before the number.
_______________________ 1. It is a statistical technique in decision-making used for
the selection of a limited number of tasks that produce
significant overall effect.
_______________________ 2. It describes the positive attributes, tangible and
intangible, internal to your organization.
_______________________ 3. It is a project management tool assisting in the planning
and scheduling of projects of all sizes, although they are
particularly useful for simplifying complex projects.
_______________________ 4. It is a type of mathematical diagram using Cartesian
coordinates to display values for two variables for a set
of data. Consists of an X axis (the horizontal axis), Y axis
(the vertical axis), and a series of dots.
_______________________ 5. It is a graphic representation of the data you generate
from that method, laid out as a timeline.
_______________________ 6. These include external factors beyond your control that
could place your strategy, or the business itself, at risk.
_______________________ 7. It is a group creativity technique which aim is to
generate as many ideas on the topic.
_______________________ 8. It is a fact-finding exercise to collect all the relevant
information on a matter.
_______________________ 9. It is a procedure or a method for the analysis of some
problem, status or a fact.
_______________________ 10. It is a visual tool used to logically organize possible
causes for a specific problem or effect by graphically
displaying them in increasing detail, suggesting causal
relationships among theories.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 19 of 41
Related to Work Activities Checked by: LCEST
ANSWER KEY4.1-1
EXPLAINING THE ANALYTICAL TECHNIQUES
1. PARETO Analysis
2. Strength
3. GANTT Chart
4. SCATTERGRAM
5. PERT
6. Threats
7. Brainstorming
8. Investigation
9. Analytical Technique
10. Cause and effect diagram
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 20 of 41
Related to Work Activities Checked by: LCEST
DETAILS OF LEARNING OUTCOME
CONTENTS:
Normal Operating Parameters and Product Quality
Identifying and Clarifying the Nature of Problem
Application of Analytical Techniques
ASSESSMENT CRITERIA:
1. Variances are identified from normal operating parameters and product quality
2. Extent, cause, and nature of the problem are defined based on observation,
investigation and analytical techniques
3. Problems are clearly stated and specified
METHODOLOGIES:
Self-paced/
modular
Discussion
Case Studies
ASSESSMENT METHODS:
Written test
Direct Observation
Interview
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 21 of 41
Related to Work Activities Checked by: LCEST
LEARNING EXPERIENCE
LEARNING OUTCOME 2: Identify the Problem
1. Read Information Sheet 4.2-1 on Identifying You may clarify with the
the Problem facilitator if you have concerns on
the lesson
3. Perform the Task Sheet No. 4.2-1 on Evaluate your performance using
Identifying the Problem Performance Criteria Check List
No. 4.2-1
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 22 of 41
Related to Work Activities Checked by: LCEST
INFORMATION SHEET 4.2-1
IDENTIFYING THE PROBLEM
LEARNING OBJECTIVES:
After reading this information sheet, you should be able to:
Explain the importance of quality parameter in describing the quality of the product
Discuss the process in identifying/clarifying a problem
Explain the importance of using analytical techniques in identifying the problem.
Quality parameter - the size characterizing the quality level of certain consumer and
production goods and processes leading to the production of a given good.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 23 of 41
Related to Work Activities Checked by: LCEST
The quality is described by eight dimensions characterizing, in various respects, the data of
good and determining their essence and purpose, i.e.:
industry,
users,
society,
nature.
The quality parameters are determined by the actual condition of the company and its
surroundings as well as the properties of raw materials and the technological process used
during production. Improperly used technologies, inadequate environment of production
processes, poor storage and transport may negatively affect product quality. These
parameters can also be divided according to the group of features that contain a specific
number and type of detailed qualitative characteristics depending on the needs to be met.
These are:
1. Natural and technical features, all product features given to them by nature or
obtained as a result of technological processes, according to standards containing
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 24 of 41
Related to Work Activities Checked by: LCEST
basic parameters of structure and function of these products. This group consists of
physical, chemical and biological distinctions). They have an objective character,
because they can be compared with existing patterns.
2. Economic features are elements of the quality structure of goods that give users a
measurable sum of benefits. Expressed using economic indicators, e.g. depreciation.
3. The functional features make the products able to satisfy material (technical) as well
as intangible (brand image, i.e. branded product) consumer needs. These are, for
example, durability, ease of use and maintenance, comfort in use.
4. Ergonomic properties, adjustment of products to anatomical, physiological and
psychological features of a human being.
5. Aesthetic features that characterize the appearance. They are shape, colors, external
construction solutions.
6. Ecological features, determined by the properties of goods, making them
environmentally friendly.
The crux of the problem is usually not readily apparent and one runs the risk of reaching a
premature conclusion when only part of the pertinent information has been collected.
Often such problems are unclear when they are first brought to attention. Clarification is
therefore essential but if it is done too rapidly, or in a cursory way, it may lead to: focusing
on a problem that is not important or not perceived to be important by key stakeholders;
considering inappropriate solutions; and failing to consider appropriate solutions. A failure
to reconsider a problem iteratively as additional information is found can have the same
consequences.
To ensure that all parties have been consulted and that various avenues have been
explored, we use the following seven questions to clarify a problem:
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 25 of 41
Related to Work Activities Checked by: LCEST
Application of Analytical Techniques
An analytical approach is the use of an appropriate process to break a problem down into
the elements necessary to solve it. Each element becomes a smaller and easier problem to
solve.
The key word in the above definition is "appropriate." If your problem solving process
doesn't fit the problem at hand, you can execute the process to the highest quality possible
and still not solve the problem. This is the reason most people fail to solve difficult
problems. They're using an inappropriate approach without realizing it. The process
doesn't fit the problem.
In practice there are lots of quite simple analytical techniques that managers and analysts
use during normal work, often without naming it somehow. For such techniques, it is often
enough just a system of “paper-pencil,” or general office equipment. They are based
primarily on the experience of the person who uses them. There are also a number of
specialized analytical techniques, which are overwhelmingly based on some mathematical
model or which require certain equipment or tools.
References: https://ceopedia.org/index.php/Quality_parameters
https://myafshelp.afsusa.org/hc/en-us/articles/115001642387-Clarify-a-
Problem.
https://www.thwink.org/sustain/articles/000_AnalyticalApproach/index.htm
#:~:text=Here%20it%20is%3A-,An%20analytical%20approach%20is
%20the%20use%20of%20an%20appropriate%20process,and%20easier
%20problem%20to%20solve.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 26 of 41
Related to Work Activities Checked by: LCEST
SELF-CHECK N0.4.2-1-
IDENTIFYING THE PROBLEM
True or False. Write T on the space provided beside the number if the statement is correct.
Otherwise, write F.
_____1. Clarification is therefore essential but if it is done too rapidly, or in a cursory
way, it may lead to focusing on a problem that is not important.
_____2. An analytical approach is the use of an appropriate process to break a problem
down into the elements necessary to solve it.
_____3. The aesthetic features of the product contain basic parameters of structure and
function of these products.
_____4. Quality parameter is the size characterizing the quality level of certain
consumer and production goods and processes leading to the production of a
given good.
_____5. Economic features are elements of the quality structure of goods that give
users a measurable sum of benefits.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 27 of 41
Related to Work Activities Checked by: LCEST
ANSWER KEY 4.2-1
IDENTIFYING THE PROBLEM
1. T
2. T
3. F
4. T
5. T
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 28 of 41
Related to Work Activities Checked by: LCEST
TASK SHEET 4.2-1
Title: Identifying the Problem
Performance Objective: As a consultant you are asked to identify the problems causing
low motivation. Suggest solutions to senior management..
Procedure:
1. Identify the main problem, and note any smaller problems that have a
relationship with the main problem
2. See whether the main problem needs to be broken down further;
Assessment Method:
Question and Answer
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 29 of 41
Related to Work Activities Checked by: LCEST
PERFORMANCE CRITERIA CHECKLIST 4.2-1
CRITERIA YES NO
Did you identify smaller problem that may cause the main problem?
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 30 of 41
Related to Work Activities Checked by: LCEST
DETAILS OF LEARNING OUTCOME
CONTENTS:
Non-routine Process and Quality Problems
Teamwork and Work Allocation Problem
Safety and Emergency Situations and Incidents
ASSESSMENT CRITERIA:
1. Possible cause/s of problem are identified based on experience & the use of
problem solving tools/analytical techniques
2. Possible cause statements are developed
3. Fundamental causes are explained
METHODOLOGIES:
Self-paced/
modular
Discussion
Case Studies
ASSESSMENT METHODS:
Written test
Direct Observation
Interview
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 31 of 41
Related to Work Activities Checked by: LCEST
LEARNING EXPERIENCE
LEARNING OUTCOME 3: Determine the Possible Cause/s of the Problem
3. Read Information Sheet 4.3-1 on Determining You may clarify with the
the Possible Cause/s of the Problem facilitator if you have concerns on
the lesson
4. Perform the Task Sheet No. 4.3-1 on Evaluate your performance using
Determining the Possible Cause/s of the Performance Criteria Check List
Problem No. 4.3-1
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 32 of 41
Related to Work Activities Checked by: LCEST
INFORMATION SHEET 4.3-1
DETERMINING THE POSSIBLE CAUSE/S OF THE PROBLEM
LEARNING OBJECTIVES:
After reading this information sheet, you should be able to:
Identify quality problems and the non-routine process to solve them
Identify work allocation problem and the means to resolve them
Identify the different safety and emergency situations and incidents
Quality problems can arise on any project, and can take on many forms. Many of the
problems are minor irritants that keep you from implementing the most optimal solution,
but nevertheless can be tolerated. Many need to be resolved before you can implement
your solution. A few of them are "show-stoppers." All of these problems can be resolved
using similar techniques. Obviously the larger the problem, the more complex the solution
might be.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 33 of 41
Related to Work Activities Checked by: LCEST
The diagram below shows a list of drivers or causes that can influence quality.
Complaints and schedule delays can be caused by almost any driver, or combination of
drivers, listed in the above diagram. But some common causes include:
Hurried work – when teams are in a hurry to complete their work it increases the
chances of making mistakes
Changes to scope and specification – when specs and/or the size of the project
changes midstream, workers and teams can make mistakes while trying to adjust to
the changes, especially if those changes are poorly communicated
Complexity – technical tasks and complex processes invite people to make errors
Upstream errors – some errors can be passed-down from one team to another, and
if undiscovered, they can continue to be passed along until later stages of the project
or until the customer receives the product
Hand-offs – having to hand work off to other teams/departments can introduce
errors
Communication issues – lacking a system to notify downstream teams of important
product information or issues can cause people to make mistakes
Staff turnover – new staff are more prone to making mistakes as they’re coming up-
to-speed
Misunderstood specification – inheriting a specification that is difficult to
understand or left open to interpretation can introduce errors, and those errors can
be compounded as other teams work from the same specification
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 34 of 41
Related to Work Activities Checked by: LCEST
Teamwork and Work Allocation Problem
We all know that teamwork promotes creativity and increases the overall productivity of
an organization. While this is true, there are many unsaid challenges faced by every team
which can really make the whole experience of working as a team frustrating.
Role Uncertainty
This culture of shared responsibilities might be a little hard to get used to, if you
have never worked with a team before. Working with many people can create a
confusion on your role in the team, resulting multiple people taking up the same
responsibility or leave out some vital tasks. Asking the manager of the team clearly
about your role in the team could help avoid these situations.
Lack Of Trust
When you work as an individual, you are used to making decisions and complete
tasks individually. But when you work with a team, you have to trust your team
mates and let them take a few decisions for the team.
Sometimes, team members make mistakes and it could be hard for you to trust them
with any other decision. But as a team it is important to trust your teammates and
function as a team.
Unclear Goals
Some employees perform better when they function as a team and some perform
better as individual contributors. One reason for this could be setting the right goals.
You can easily set the right goals for yourself as an individual contributor but when
you are a part of the team, you have to consider your teammates before setting
goals.
One of the most common reasons for conflicts in teams is the ambiguity of goals. If
you are not on the same page with your other team mates about your goals, it affects
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 35 of 41
Related to Work Activities Checked by: LCEST
the productivity of the whole team, so communicate with the team/ manager and be
clear about your goals.
Disengagement
Disengagement in teams is often a result of lack of clarity on team goals and how
they contribute to the organization.
Talent Differences
Some employees contribute more to a team than the rest of the team. The reason is
not always that they feel responsible for the team, the share of their contribution
depends on their individual talent and efficiency. But sometimes, these talent
differences cause conflicts between team members.
Some employees of team could be slower and less efficient than the rest. This could
decrease the overall productivity of the team which could be frustrating for the
high-performers of the team causing conflicts within the team. To avoid this, the
goals should be set based on their capability and skills.
The challenges with work allocation systems are multiple. Firstly, the availability of input
data is critical; the quality, the quantity, and the format of this data need to be carefully
investigated. Secondly, the dynamic nature of the environment surrounding work
allocation (job cancellation, delays, sickness, regulation change, etc.) forces such a system
to be very responsive and flexible. Thirdly, the scale and complexity of work allocation
problems can very quickly make the task of efficiently allocating jobs to resources
intractable for a human being.
Sometimes it is not an easy task for a team manager to ensure that the work assigned to his
team is properly and fairly portioned and allocated among the team members. It is just as
in every type of team sport – the coach of a team needs to select the right players for the
next game, reasoning from specifics of the next opponent and skills of available players,
and identify the position where each of these team members will play to bring maximum of
advantage.
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 36 of 41
Related to Work Activities Checked by: LCEST
Effective Team Work Allocation should be:
Fair – nobody in the team wittingly is appointed to some work which he cannot
accomplish due to some objective conditions.
Equal – portions or types of workloads are allocated equally, so nobody in the team
appears just overwhelmed with excessive tasks (if this is not somehow stipulated
and compensated), while someone other enjoys unjustified freeness.
Justified – work is always accurately assessed and assigned only to appropriate
employees who are approved, expected or motivated as capable of doing it.
Nobody expects an emergency or disaster -- especially one that affects them, their
employees, and their business personally. Yet the simple truth is that emergencies and
disasters can strike anyone, anytime, and anywhere. You and your employees could be
forced to evacuate your company when you least expect it.
Floods
Earthquakes
Fire
Toxic gas releases
Chemical spills
Radiological accidents
Contagious illness
Explosions
Civil disturbances and riots
Workplace violence
References:https://www.upperelementarysnapshots.com/2015/10/mathproblemsolving.ht
ml
https://myafshelp.afsusa.org/hc/en-us/articles/115001642387-Clarify-a-
Problem.
https://www.accipio.com/eleadership/mod/wiki/view.php?id=1948
http://www.todolistsoft.com/solutions/howtos/how-to-allocate-and-control-
work-in-your-team.php
https://www.osha.gov/Publications/osha3088.html
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 37 of 41
Related to Work Activities Checked by: LCEST
SELF-CHECK N0.4.3-1-
DETERMINING THE POSSIBLE CAUSE/S OF THE PROBLEM
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 38 of 41
Related to Work Activities Checked by: LCEST
ANSWER KEY 4.3-1
DETERMINING THE POSSIBLE CAUSE/S OF THE PROBLEM
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 39 of 41
Related to Work Activities Checked by: LCEST
TASK SHEET 4.3-1
Title: Determining The Possible Cause/S Of the Problem
Performance Objective: Using analytical technique, identify the possible causes of lost
control car.
Procedure:
1. Make an analysis why a car may possible lose control.
2. Create a fishbone diagram illustrating the causes of the problem. (Refer to
Information Sheet No. 4.1-1)
3. Submit the diagram to the facilitator
Assessment Method:
Portfolio Analysis
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 40 of 41
Related to Work Activities Checked by: LCEST
PERFORMANCE CRITERIA CHECKLIST 4.3-1
CRITERIA YES NO
Does the diagram illustrates the major and sub-causes of the problem?
Date Developed:
CBLM for January 2020
Bookkeeping NC III / Solve Page
Workplace Problem Developed by: ARNEL HIMZON 41 of 41
Related to Work Activities Checked by: LCEST