Scribd Logo
Upload

Welcome to Scribd!

  • Mecafix 120: Description Technical Data

    Uploaded by

    Juan Carlos Espinoza
    194 views1 page
    MeCaFix 120 is a metallic repair putty filled with stainless steel and titanium particles. It can be used to repair cracks, holes, and damaged surfaces on metal parts. It bonds strongly to metal substrates and can be machined after curing. MeCaFix 120 cures at room temperature within 1 hour and reaches full strength after 3.5 hours, allowing repaired parts to be quickly returned to service. It is resistant to abrasion, corrosion, pressure, and deformation and can operate at temperatures up to 195°F.

    Original Description:

    Original Title

    MeCaTeC_MeCaFix_120

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    MeCaFix 120 is a metallic repair putty filled with stainless steel and titanium particles. It can be used to repair cracks, holes, and damaged surfaces on metal parts. It bonds strongly to metal substrates and can be machined after curing. MeCaFix 120 cures at room temperature within 1 hour and reaches full strength after 3.5 hours, allowing repaired parts to be quickly returned to service. It is resistant to abrasion, corrosion, pressure, and deformation and can operate at temperatures up to 195°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    194 views1 page

    Mecafix 120: Description Technical Data

    Uploaded by

    Juan Carlos Espinoza
    MeCaFix 120 is a metallic repair putty filled with stainless steel and titanium particles. It can be used to repair cracks, holes, and damaged surfaces on metal parts. It bonds strongly to metal substrates and can be machined after curing. MeCaFix 120 cures at room temperature within 1 hour and reaches full strength after 3.5 hours, allowing repaired parts to be quickly returned to service. It is resistant to abrasion, corrosion, pressure, and deformation and can operate at temperatures up to 195°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Surfacing Polymer TECHNICAL DATA SHEET

    MeCaFix 120
    Metallic Repair Putty

    DESCRIPTION TECHNICAL DATA


    MeCaFix 120 is a low temperature cure, stainless steel Performance / Property Results
    and titanium filled metallic repair putty. MeCaFix 120 is
    specifically formulated to protect working surfaces in all Hardness ASTM D2240 [Shore D] 80
    positions without sag. The polymer is extremely versatile Pull Off Adhesion ASTM D4541 ≥ 4,100 psi (≥ 28 MPa)
    and can be used to protect surfaces against abrasive wear, X Cut Adhesion ASTM D6677 Rating 10
    corrosive liquids and corrosion. The metallic reinforced
    polymer matrix can be precision machined, drilled and Abrasion Resistance ASTM D4060 40 mg
    tapped whilst exhibiting exceptional resistance to pressure Elongation 2%
    and deformation. Impact ASTM D2794 45 in•lb (0.5 kg•m)

    APPLICATIONS
    PHYSICAL DATA
    •Thread Repair •Propellers
    •Cracked Casings •Tube Sheet Repair Color Gray
    •Pump Housings •Scored Hydraulic Rams Mix Ratio 3:1 by volume
    •Resurfacing Metal Loss •Butterfly Gate Valve Repairs Mix Ratio 4:1 by weight
    •Polymer Shimming •Bellows Sag Resistance (250 mils / 6.3 mm) No Sag
    •Cold Bonding Adhesive Working Life (77°F / 25°C) 15 minutes
    Low Temperature Application >50°F (>10°C)
    COVERAGE DATA While material is
    Max. Recoat Window (77°F / 25°C)
    soft
    Theoretical coverage rate data Percent Solids 100%
    Recommended Odor Slight to nil
    Theoretical
    Kit Weight Coating Mixed Viscosity >200,000 mPa•s (cP)
    Coverage Rate
    Thickness
    Mixed Density 2.48 g/ml
    0.55 lb (250 g) 125 mils (3.2 mm) 0.3 ft2 (0.027 m2)
    Max. Operating Temp. - Wet Service 122°F (50°C)
    2.2 lb (1.0 kg) 125 mils (3.2 mm) 1.4 ft2 (0.130 m2)
    Max. Operating Temp. - Dry Service 195°F (90°C)
    Practical Coverage = Theoretical Coverage - Waste Factor Cure Time - Touch (77°F / 25°C) 1 hour
    Cure Time - Handle (77°F / 25°C) 3.5 hours

    PACKAGING Before applying this product, please refer to the Application Instructions.

    0.10 liter / 0.03 Gal. / 250 g (0.25 kg) / 0.55 lb Kit


    0.40 liter / 0.11 Gal. / 1.0 kg / 2.2 lb Kit

    YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS


    EUTECTIC CORPORATION EUTECTIC CANADA
    REV 03:06/2019

    N94 W14355 Garwin Mace Drive 428, rue Aimé-Vincent


    Menomonee Falls, WI 53051 USA Vaudreuil-Dorion, Québec mecatecpolymers.com
    Tel.: +1 (800) 558-8524 J7V 5V5 Canada
    Tel.: +1 (800) 361-9439

    Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without
    representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the
    user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof.

    You might also like