Professional Documents
Culture Documents
W22Xdb Flameproof Motors: High Efficiency Low Voltage IEC Frame Sizes 71 To 355
W22Xdb Flameproof Motors: High Efficiency Low Voltage IEC Frame Sizes 71 To 355
Markings
and generators)
The marking of Equipment meets the ATEX Directives and IECEx Scheme.
Classification per Groups: subdivision according to the type of flammable material present. Directive 2014/34/EU (Only ATEX) EN/IEC 60079-0 Explosive Gas Atmosphere
(ATEX and IECEx)
g Eyebolts: ensuring safety to operators, offering easy Variable Frequency Drives Operation
handling, shipment and storage, and allowing the motors The use of VFD’s is recognized as one of the major driving
to meet specific local standards and directives regarding forces behind energy saving due to their ability to adjust the
product lifting. motor’s output to best suit load requirements.
For this reason, W22Xdb motors are equipped with the
g Thermal protection: winding thermistors fitted as standard WISE® insulation (WEG Insulation System Evolution) which
to protect the motor winding in case of overload. permits them to operate with variable frequency drives
(VFD’s) at voltages up to 690V.
g Paint finish: high performance polyurethane coating To further enhance their use with VFD’s, Insulated Bearings
(respecting the C3 Medium criteria of the ISO 12944 and Shaft Grounding Rings are available.
standard) protects the motor surface even in the harshest Additionally, for operation at low frequencies the W22Xdb line
of environments. can be produced in TEBC versions (with forced ventilation) or
fitted with an Encoder1 for applications which require precise
positioning operations.
Due to their outstanding performance, W22Xdb motors are
capable of maintaining the T4 temperature class even when
driven by a VFD ².
(Ex db eb) - suitable for Group I mining Other WEG Industrial Motors for Hazardous Locations
g Temperature class: T5 or T6
g Efficiency levels: Super Premium Efficiency - IE4 Pressurized Motors (Ex p machines) HGF Ex ec
Premium Efficiency - IE3 For use in areas classified as Zone 1 and 2 Increased safety level of protection “ec” (Ex ec machines)
Standard Efficiency - IE1 Power ratings up to 50,000 kW (other outputs upon request) For use in areas classified as Zone 2
g Ambient temperature: -55 °C to +80 °C
g Certification according TR/CU (EAC Ex), INMETRO,
Frames 280 to 1800 Power ratings 75 kW to 3150 kW
Voltages: up to 13,800 V Frames: 315L/A/B to 630
ANZEx, CERTEx, PESO/CCoE, SONCAP, SASO, MASC.
Voltage: up to 11,000 V
Please visit us at www.weg.net to find out more about WEG hazardous area products.
Construction Features
Frame 71 80 90S/L 100L 112M 132S/M Frame 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 315L 355M/L
Ambient temperature range -20°C up to +40°C Ambient temperature range -20°C up to +40°C
Mounting form Horizontal Foot (IM B3T) Mounting form Horizontal Foot (IM B3T)
Frame Material FC-200 (EN GJL 200) Cast iron Frame material FC-200 (EN GJL 200) Cast iron
Grounding Double grounding - one inside the terminal box and one on the frame Grounding Double grounding - one inside the terminal box and one on the frame
Cooling method Totally enclosed fan cooled - IC411 Cooling method Totally enclosed fan cooled - IC411
Fan cover material FC-200 (EN GJL 200) Cast iron Fan cover material FC-200 (EN GJL 200) Cast iron
Endshields material FC-200 (EN GJL 200) Cast iron Endshields material FC-200 (EN GJL 200) Cast iron
Optional Features
Frame 71 80 90S/L 100L 112M 132S/M Frame 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 315L 355M/L
General features General features
Nameplate marking Nameplate marking
Ex db eb IIB T4 Gb NA NA O O O O Ex db eb IIB T4 Gb O O O O O O O O O
Ex db eb IIC T4 Gb NA NA O O O O Ex db eb IIC T4 Gb O O O O O O O O O
Ex db I Mb O O O O O O Ex db I Mb O O O O O O O O O
Ex db eb I Mb NA NA O O O O Ex db eb I Mb O O O O O O O O O
Ex tb IIIC T125°C Db IP6X O O O O O O Ex tb IIIC T125°C Db IP6X O O O O O O O O O
Ambient temperature design Ambient temperature design
-20°C to -40°C O O O O O O -20°C to -40°C O O O O* O* O* O* O* O*
-40°C to -55°C O O O O O O -40°C to -55°C O O O O* O* O* O* O* O*
-20°C to +50°C O O O O O O -20°C to +50°C O O O O O O O O O
-20°C to +60°C O O O O O O -20°C to +60°C O O O O O O O O O
-20°C to +70°C O O O O O O -20°C to +70°C O O O O O O O O O
-20°C to +80°C O O O O O O -20°C to +80°C O O O O O O O O O
Temperature Class Temperature Class
T5 O O O O O O T5 O O O O O O O O O
T6 O O O O O O T6 O O O O O O O O O
Certifications Certifications
EAC Ex O O O O O O EAC Ex O O O O O NA NA NA NA
INMETRO O O O O O O INMETRO O O O O O O O O O
PESO / CCOE O O O O O O PESO / CCOE O O O O O NA NA NA NA
ANZEx O O O O O O ANZEx O O O O O NA NA NA NA
SASO O O O O O O SASO O O O O O O O O O
SONCAP O O O O O O SONCAP O O O O O O O O O
MASC O O O O O O MASC O O O NA NA NA NA NA NA
VIK Execution O O O O O O VIK Execution O O O O O O O O O
Mechanical options Mechanical options
Terminal box Terminal box
Auxiliary terminal box Auxiliary terminal box
NA NA O O O O O O O O O O O O O
(thermal protection) (thermal protection)
Terminal block Terminal block
Ex db eb Increased Safety terminal block NA NA O O O O Ex db eb Increased Safety terminal block O O O O O NA NA NA NA
Ex db eb increased safety bushing isolator NA NA NA NA NA NA Ex db eb increased safety bushing isolator NA NA NA NA NA O O O O
Cable glands Cable glands
Ex db / Ex db eb cable glands (brass) O O O O O O Ex db / Ex db eb cable glands (brass) O O O O O O O O O
Mounting Mounting
Flange FF (IEC) O O O O O O Flange FF (IEC) O O O O O O O O O
Flange FF (IEC) - superior O O O O O O Flange FF (IEC) - superior O O O O O O NA NA NA
Flange FF (IEC) - inferior NA NA O O O O Flange FF (IEC) - inferior O O O O O O O O O
Flange C-DIN (IEC) O O O O O O Flange C-DIN (IEC) NA NA NA NA NA NA NA NA NA
Flange C-DIN (IEC) - superior O O O O O O Flange C-DIN (IEC) - superior NA NA NA NA NA NA NA NA NA
Flange C-DIN (IEC) - inferior O O O O O O Flange C-DIN (IEC) - inferior NA NA NA NA NA NA NA NA NA
Flange C (NEMA) O O O O O O Flange C (NEMA) O O O O O O O O O
Flange D (NEMA) NA O O O O O Flange D (NEMA) O O O O O O O O O
Dowel pins NA NA O O O O Dowel pins O O O O O O O O O
Cooling fan Cooling fan
Cast iron O O O O O O Cast iron O O O O O O O O O
Bronze O O O O O O Bronze O O O O O O O O O
Bearings Bearings
2RS ball bearings at both ends O O O O O O 2RS ball bearings at both ends O O O NA NA NA NA NA NA
ZZ ball bearings at both ends S S S S S S ZZ ball bearings at both ends O O O NA NA NA NA NA NA
Shaft sealing Shaft sealing
Viton seal (IP56) O O O O O O Viton seal (IP56) O O O O O O O O O
Lip seal for low temperature O O O O O O Lip seal for low temperature O O O O O O O O O
Oil seal for low temperature O O O O O O Oil seal for low temperature O O O O O NA NA NA NA
Taconite labyrinth (IP65, IP56) NA NA O O O O Taconite labyrinth (IP65, IP56) O O O O O O O O O
W3 Seal (IP65, IP56, IP66) NA NA O O O O W3 Seal (IP65, IP56, IP66) O O O O O O O O O
Joints / Bolts sealing Joints / Bolts sealing
Molykote DC 33 (joint sealing) O O O O O O Molykote DC 33 (joint sealing) O O O O O O O O O
Lumomoly (bolt sealing) O O O O O O Lumomoly (bolt sealing) O O O O O O O O O
S (Standard) / NA (Not available) / O (Optional) * Refer to WEG for IIB designs in frames 280-355 and IIC designs in frames 225-355.
Frame 71 80 90S/L 100L 112M 132S/M Frame 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 315L 355M/L
Shaft Shaft
AISI 1040/45 S S S S S S AISI 1040/45 S S S S S S O O O
AISI 4140 O O O O O O AISI 4140 O O O O O O S S S
AISI 304 (Stainless Steel) O O O O O O AISI 304 (Stainless Steel) O O O O O O O O O
AISI 316 (Stainless Steel) O O O O O O AISI 316 (Stainless Steel) O O O O O O O O O
AISI 420 (Stainless Steel) O O O O O O AISI 420 (Stainless Steel) O O O O O O O O O
Shaft Locking Device NA NA NA NA NA O Shaft Locking Device O O O O O O O O O
Second Shaft End O O O O O O Second Shaft End O O O O O O O O O
Degree of protection Degree of protection
IP65 O O O O O O IP65 O O O O O O O O O
IP66 O O O O O O IP66 O O O O O O O O O
IPW56 O O O O O O IPW56 O O O O O O O O O
IPW65 O O O O O O IPW65 O O O O O O O O O
IPW66 O O O O O O IPW66 O O O O O O O O O
Grease / lubrication Grease / lubrication
Grease Aeroshell 22 O O O O O O Grease Aeroshell 22 O O O O O O O O O
Grease Aeroshell 7 O O O O O O Grease Aeroshell 7 O O O O O O O O O
Grease Isoflex NBU 15 O O O O O O Grease Isoflex NBU 15 O O O O O O O O O
Carbon steel grease nipple NA NA O O O O Carbon steel grease nipple S S S S S S S S S
Carbon steel grease nipple (extended) NA NA NA NA NA NA Carbon steel grease nipple (extended) NA NA NA O O O O O O
Stainless steel grease nipple NA NA O O O O Stainless steel grease nipple O O O O O O O O O
Stainless steel grease nipple (extended) NA NA NA NA NA NA Stainless steel grease nipple (extended) NA NA NA O O O O O O
Painting and protection* Painting and protection*
211E (epoxy) - Meets atmospheric corrosive 211E (epoxy) - Meets atmospheric corrosive
categories C5 (I and M) as indicated in DIN EN O O O O O O categories C5 (I and M) as indicated in DIN EN O O O O O O O O O
ISO 12944-2 ISO 12944-2
211P (polyurethane) - Meets atmospheric 211P (polyurethane) - Meets atmospheric
corrosive categories C5 (I and M) as indicated in O O O O O O corrosive categories C5 (I and M) as indicated in O O O O O O O O O
DIN EN ISO 12944-2 DIN EN ISO 12944-2
212E (epoxy) - Meets atmospheric corrosive 212E (epoxy) - Meets atmospheric corrosive
categories C5 (I and M) as indicated in DIN EN O O O O O O categories C5 (I and M) as indicated in DIN EN O O O O O O O O O
ISO 12944-2 ISO 12944-2
212P (polyurethane) - Meets atmospheric 212P (polyurethane) - Meets atmospheric
corrosive categories C5 (I and M) as indicated in O O O O O O corrosive categories C5 (I and M) as indicated in O O O O O O O O O
DIN EN ISO 12944-2 DIN EN ISO 12944-2
214P (polyurethane) - Meets atmospheric 214P (polyurethane) - Meets atmospheric
corrosive categories C5 (I and M) as indicated in O O O O O O corrosive categories C5 (I and M) as indicated in O O O O O O O O O
DIN EN ISO 12944-2 DIN EN ISO 12944-2
Inside of terminal box painted O O O O O O Inside of terminal box painted O O O O O O O O O
Internal tropical protection - complete O O O O O O Internal tropical protection - complete O O O O O O O O O
Balance and Vibration Balance and Vibration
Vibration level grade B O O O O O O Vibration level grade B O O O O O O O O O
Provision for vibration detector SPM O O O O O O Provision for vibration detector SPM S S S S S S S S S
Balance without key NA O O O O O Balance without key O O O O O O O O O
Balance with full key NA O O O O O Balance with full key O O O O O O O O O
Key type C O O O O O O Key type C O O O O O O O O O
Special foot flatness (0,127 mm) O O O O O O Special foot flatness (0,127 mm) O O O O O O O O O
Drain Drain
Certified Ex d drain plugs (not Ex d I) O O O O O O Certified Ex d drain plugs (not Ex d I) O O O O O O O O O
Grounding Grounding
Double grounding + accessory (1 in terminal box Double grounding + accessory (1 in terminal box
O O O O O O O O O O O NA NA NA NA
+ 2 on frame) + 2 on frame)
Larger Grounding O O O O O O Larger Grounding O O O O O NA NA NA NA
Nameplates Nameplates
VSD rating plate O O O O O O VSD rating plate O O O O O O O O O
Direction of Rotation plate O O O O O O Direction of Rotation plate O O O O O O O O O
Additional / Tag plate O O O O O O Additional / Tag plate O O O O O O O O O
Second main nameplate (loose) O O O O O O Second main nameplate (loose) O O O O O O O O O
*For IIC and painting >250 µm, beware of risk of electrostatic discharge. Refer to WEG Instruction Manual.
Frame 71 80 90S/L 100L 112M 132S/M Frame 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 315L 355M/L
Other mechanical options Other mechanical options
Stainless steel hardware (nuts & bolts) O O O O O O Stainless steel hardware (nuts & bolts) O O O O O O O O O
Stainless steel fan cover O O O O O O Stainless steel fan cover O O O O O O O O O
Canopy (mandatory for vertical shaft down Canopy (mandatory for vertical shaft down
O O O O O O O O O O O O O O O
applications and all Group I machines) applications and all Group I machines)
Slinger (vertical shaft up applications) O O O O O O Slinger (vertical shaft up applications) O O O O O O O O O
Grease outlet through the endshield NA NA O O O O Grease outlet through the endshield O O O O O O O O O
Grease outlet by plastic plug NA NA O O O O Grease outlet by plastic plug O O O NA NA NA NA NA NA
Without cooling fan - IC 418 (TEAO) O O O O O O Without cooling fan - IC 418 (TEAO) O O O O O O O O O
Without cooling fan - IC 410 (TENV) O O O O O O Without cooling fan - IC 410 (TENV) O O O O O O O O O
Electrical options Electrical options
Winding thermal protection Winding thermal protection
Thermostat - alarm / trip (NO or NC) O O O O O O Thermostat - alarm / trip (NO or NC) O O O O O O O O O
PT100 two wires, one per phase NA NA O O O O PT100 two wires, one per phase O O O O O O O O O
PT100 two wires, two per phase NA NA O O O O PT100 two wires, two per phase O O O O O O O O O
PT100 three wires, one per phase NA NA O O O O PT100 three wires, one per phase O O O O O O O O O
PT100 three wires, two per phase NA NA O O O O PT100 three wires, two per phase O O O O O O O O O
PTC thermistors (alarm) O O O O O O PTC thermistors (alarm) O O O O O O O O O
Thermocouple - alarm / trip O O O O O O Thermocouple - alarm / trip O O O O O O O O O
KTY 84 sensor O O O O O O KTY 84 sensor O O O O O O O O O
Bearing thermal protection Bearing thermal protection
PTC thermistor O O O O O O PTC thermistor O O O O O O O O O
PT100 two wires, one per bearing O O O O O O PT100 two wires, one per bearing O O O O O O O O O
PT100 three wires, one per bearing O O O O O O PT100 three wires, one per bearing O O O O O O O O O
Space heaters Space heaters
110-127 V O O O O O O 110-127 V O O O O O O O O O
200-240 V S S S S S S 200-240 V S S S S S S S S S
110-127 / 220-240 V O O O O O O 110-127 / 220-240 V O NA NA NA NA NA NA NA NA
380-480 V O O O O O O 380-480 V O O O O O O O O O
Service factor Service factor
1.15 O O O O O O 1.15 O O O O O O O O O
1.25 O O O O O O 1.25 O O O O O O O O O
Insulation class Insulation class
H O O O O O O H O O O O O O O O O
Variable Speed Options Variable Speed Options
Insulated DE or NDE bearing NA NA NA NA NA NA Insulated DE or NDE bearing O O O O O O O O O
Forced ventilation kit with encoder provision O O O O O O Forced ventilation kit with encoder provision O O O O O O O O O
Forced ventilation kit Forced ventilation kit
O O O O O O O O O O O O O O O
without encoder provision without encoder provision
Encoder O O O O O O Encoder O O O O O O O O O
Drive end shaft grounding ring NA NA O O O O Drive end shaft grounding ring O NA O O O O O O O
Non drive end shaft grounding ring NA NA O O O O Non drive end shaft grounding ring O O O O O O O O O
80 125 37 149 180 100 121 53 143 11 50 127/106 19j6 14j6 40 30 28 6 15,5
5
90S/L 140 38 164 200 100 125 89 183 12.5 56 157,5/124,5 24j6 16j6 50 40 36 8 20
100L 160 46 188 232 140 183 82 211 14 63 178,5/135,5 28j6 22j6 60 50 45 8 6
24
112M 190 48 220 252 140 186 79 213.5 14 70 191/145 28j6 24j6 60 50 45 8
132S/M 216 45 248 296 140 178 104 243 20 89 222/184 38k6 28j6 80 60 63 10 33
8
160M/L 254 64 308 347 210 254 150 353 108 291/247 42k6 24j6 110 50 12 37
26
180M/L 279 80 350 371 241 279 148 367 121 287/249 48k6 24j6 110 50 80 14 42,5
200M/L 318 82 385 411 267 305 149 410 31 133 311/276 55m6 48j6 110 110 16 14 49
Frame size GB GD GF TS H HA HC HD HH HK K L* LC LL S1 S2 d1 d2
* For 71 frame foot mounted motors with FF flange, the dimensions “ C “ and “ L “ will be 70 mm and 310 mm respectively.
** Dimensions for 2-pole motors.
90S/L 140 38 164 200 182,5 100 125 89 183 12.5 56 157,5/124,5 24j6 16j6 50 40 36 8 5 20
100L 160 46 188 232 195,5 140 183 82 211 14 63 178,5/135,5 28j6 22j6 60 50 45 8 6
24
112M 190 48 220 252 208,5 140 186 79 213.5 14 70 191/145 28j6 24j6 60 50 45 8
132S/M 216 45 248 296 229 140 178 104 243 20 89 222/184 38k6 28j6 80 60 63 10 33
8
160M/L 254 64 308 347 349,5 210 254 150 353 108 291/247 42k6 24j6 110 50 12 37
26
180M/L 279 80 350 371 369,5 241 279 148 367 121 287/249 48k6 24j6 110 50 80 14 42,5
200M/L 318 82 385 411 394,5 267 305 149 410 31 133 311/276 55m6 48j6 110 110 16 14 49
Frame size GB GD GF TS H HA HB HC HD HF HH HK K L* LC LL S1 S2 d1 d2
200M/L 42,5 10 9 80 200 30 93 400 479 200 306,5 821 934 M16
“C-DIN” Flange
Frame size A B C D E F G H I J K L
Frame size Flange M N P S T α N° of holes 160
103 28 67.5 28 62
71 C-105 85 70 105 2.5 180 435 257 160 174 256 M10x1.5 90.5
M6 200 112 35 70.5 35 76
80 C-120 100 80 120
3
90 C-140 115 95 140
45° 4
100 165 M8 Frame size M N O P Q R S T U V W X
C-160 130 110
112 160 3.5 160
2xM40x1,5 M6x1,0 43.5 M6x1,0 19.5 20.5 40
132 C-200 165 130 200 M10 180 68 M20x1,5 140 262 168
200 2xM50x1.5 M8x1,25 40.5 M8x1,25 22 24 29
Table 3 - Cardboard box dimensions, weights and volumes for top mounting.
Table 4 - Cardboard box dimensions, weights and volumes for side mounting.
Frame size M N O P R S T U V X Z
280 M12x2.0 46 23 10
315 112 2xM63x1.5 2xM20x1.5 M16x2.0 2xM10x1.5 216 51.5 28 27 20 26.5 Figure 2: Cardboard box
355 M20x2.5 54.5 25 26
www.weg.net
+55 47 3276.4000
MOTORS