Hypothesis & Its Types
Hypothesis & Its Types
Hypothesis & Its Types
Unit: I
Semester: II
Paper Code: GIS 10
Name of Paper: Research Methodology and Application of Remote Sensing
and GIS Techniques in Research
PG Diploma in RS & GIS
Dr. SHYAMA PRASAD MUKHERJEE UNIVERSITY, RANCHI
1. Introduction:
2. Definition of Hypothesis:
1
add to the formulation of a theory. It enables you to specifically conclude what is true or what
is false. Ludberg observes, quite often a research hypothesis is a predictive statement, capable
of being tested by scientific methods, that relates an independent variable to some dependent
variable.
3. Nature of Hypothesis:
Importance of Hypothesis:
Hypothesis though an important part of research may not be required in all types of research.
The research which are based on fact finding (historical or descriptive research) do not need
hypothesis. Hillway also says that “When fact-finding alone is the aim of the study, a
hypothesis is not required”. Whenever possible, a hypothesis is recommended for all major
studies to explain observed facts, conditions or behaviour and to serve as a guide in the research
process.
2
✓ Hypothesis facilitates the extension of knowledge in an area. They provide tentative
explanations of facts and phenomena, and can be tested and validated. It sensitizes the
investigator to certain aspects of the situations which are relevant from the standpoint
of the problem in hand.
✓ Hypothesis provides direction to the research. It defines what is relevant and what is
irrelevant. The hypothesis tells the researcher what he needs to do and find out in his
study. Thus it prevents the review of irrelevant literature and provides a basis for
selecting the sample and the research procedure to be used in the study.
✓ Hypothesis implies the statistical techniques needed in the analysis of data, and the
relationship between the variables to be tested. It also helps to delimit his study in scope
so that it does not become broad or unwieldy.
✓ Hypothesis provides the basis for reporting the conclusion of the study. It serves as a
framework for drawing conclusions. In other word, we can say that it provides the
outline for setting conclusions in a meaningful way.
✓
So, Hypothesis has a very important place in research although it occupies a very small place
in the body of a thesis.
3
5. Sources of Hypothesis:
A good hypothesis can only be derived from experience in research. Though hypothesis should
precede the collection of data, but some degree of data collection, literature review or a pilot
study will help in the development and gradual refinement of the hypothesis. A researcher
should have quality of an alert mind to derive a hypothesis and quality of critical mind of
rejecting faulty hypothesis. The following sources can help the researcher in coming up with a
good hypothesis:
✓ Review of literature.
✓ Discussion with the experts in the given field to understand the problem, its origin and
objectives in seeking a solution.
✓ Intuition of the researcher also sometimes helps in forming a good hypothesis.
✓ Previous empirical studies done on the given area.
Research Problems are too general by themselves to enable us to carryout meaningful analysis.
They need to be specified in a more focussed way. Hypotheses are specific statements that
relate to the problem, the answers to which are likely to be yes or no, depending upon what is
uncovered from the research. Examples of Hypothesis can be:
Such statements specify links between different phenomena, in order to explain different
patterns of behaviour that appear to occur. However, such patterns of association do not
necessarily demonstrate that a causal relationship exists. We cannot for an instance say,
‘socio-economic deprivation causes suicide.’ If that was the case, then all those in Britain
defined by various yardsticks as living in a state of relative poverty would inevitably commit
suicide. This is very unlikely to happen.
4
7.1 Variable:
So, to understand the types of hypothesis, we need to understand the concept of variables first.
The variables are empirical properties that take two or more values or in other words a variable
is any entity that can take on different values. In simple terms, anything that can vary or that is
not constant can be considered a variable. For instance, age can be considered a variable
because age can take different values for different people or for the same person at different
times. Similarly, country can be considered a variable because a person’s country can be
assigned a value.
A variable is a concept or abstract idea that can be described in measurable terms. In research,
this term refers to the measurable characteristics, qualities, traits, or attributes of a particular
individual, object or situation being studied. Variables differ in many respects, most notably in
the role they are given in our research and in the type of measures that can be applied to them.
The statement of problem usually provides only general direction for the research study. It does
not include all the specific information. There is some basic terminology that is extremely
important in how we communicate specific information about research problems and research
in general. So, weight, height, income are all examples of variables.
In Research, there is a need to make a distinction between various kinds of variables. There are
many classifications given for variables. We will try to understand only the Dependent Variable
and Independent Variable.
The variables which are manipulated or controlled or changed. These are also known as
manipulated variables. Researchers often mistake independent variable and assume that it is
independent of any manipulation. It is called independent because variable is isolated from any
other factor. In research, we try to determine whether there is a cause and effect relationship.
In fact, when you are looking for some kind of relationship between variables you are trying to
see if the independent variable causes some kind of change in the other variables, or dependent
variables.
5
7.1.2 Dependant Variables:
Dependent variables are the outcome variables and are the variables for which we
calculate statistics. The variable which changes on account of independent variable is known
as dependent variable. It is something that depends on other factors. For example, a test score
could be a dependent variable because it could change depending on several factors such as
how much you studied, how much sleep you got the night before you took the test, or even how
hungry you were when you took it. Usually when you are looking for a relationship between
two things you are trying to find out what makes the dependent variable change the way it does.
✓ A positive relationship is one where an increase in one would lead to increase in the
other.
✓ A negative relationship is one where an increase in one variable lead to decrease in the
other.
✓ A zero relationship is one which shows no significant relationship between the two
variables.
✓ Once we have understood variables, we can discuss the various types of hypothesis.
6
7.2 The Types of Hypothesis:
The Research Hypothesis could be understood in terms of Simple Research hypothesis and
Complex Research Hypothesis. A simple research hypothesis predicts the relationship between
a single independent variable and a single dependent variable. A Complex hypothesis predicts
the relationship between two or more independent variables and two or more dependent
variables. A research hypothesis must be stated in a testable form for its proper evaluation and
it should indicate a relationship between variables in clear, concise and understandable
language. Research Hypothesis are classified as being directional or non-directional.
✓ Directional Hypotheses: These are usually derived from theory. They may imply that
the researcher is intellectually committed to a particular outcome. They specify the
expected direction of the relationship between variables i.e. the researcher predicts not
only the existence of a relationship but also its nature.
✓ Non-directional Hypotheses: Used when there is little or no theory, or when findings
of previous studies are contradictory. They may imply impartiality. Do not stipulate the
direction of the relationship.
Statistical Hypothesis:
To test whether the data support or refute the research hypothesis, it needs to be translated
into a statistical hypothesis. It is given in statistical terms. In the context of inferential statistics,
it is statement about one or more parameters that are measures of the population under study.
Inferential statistics is used for drawing conclusions about population values. To use inferential
statistics, we need to translate the research hypothesis into a testable form, which is called the
null hypothesis. A testable hypothesis contains variables that are measurable or able to be
7
manipulated. They need to predict a relationship that can be 'supported' or 'not supported' based
on data collection and analysis.
❖ Null Hypothesis: These are used when the researcher believes there is no
relationship between two variables or when there is inadequate theoretical or
empirical information to state a research hypothesis. The null hypothesis represents a
theory that has been put forward, either because it is believed to be true or because it is
to be used as a basis for argument, but has not been proved. Has serious outcome if
incorrect decision is made. Designated by: Ho or Hn.
We give special consideration to the null hypothesis. This is due to the fact that the null
hypothesis relates to the statement being tested, whereas the alternative hypothesis relates to
the statement to be accepted if when the null is rejected. The final conclusion, once the test has
been carried out, is always given in terms of the null hypothesis. We either 'reject Ho in favour
of Ha' or 'do not reject Ho'; we never conclude 'reject Ha', or even 'accept Ha'. If we conclude
'do not reject Ho', this does not necessarily mean that the null hypothesis is true, it only suggests
that there is not sufficient evidence against Ho in favour of Ha; rejecting the null hypothesis
then, suggests that the alternative hypothesis may be true. For example:
Ho= the males and females do not differ in respect of the frequency of seeing cinema. So,
Alternative hypothesis is usually the one which one wishes to prove and the Null
8
8.Formulating a Hypothesis:
There are no precise rules for formulating hypothesis and deducing consequences but there are
some difficulties that arise in formulating the hypothesis. However, there are certain necessary
conditions that are conducive to their formulation. They are:
Hypothesis can be formulated correctly by persons who have rich experience and academic
background, but they can never be formulated by those who have poor background knowledge.
9
9. Characteristics of A Good Hypothesis:
Hulley says a good hypothesis must be based on a good research question. It should be
simple, specific and stated in advance. So, a hypothesis could be called as a good hypothesis
if it possesses the following characteristics:
✓ Hypothesis should be simple so that it is easily understood by everyone.
✓ Hypothesis should be clear, specific and precise. If the hypothesis is not clear and
precise, the inferences drawn on its basis cannot be taken as reliable.
✓ Hypothesis should be capable of being tested.
✓ Hypothesis should state relationship between variables.
✓ Hypothesis should be consistent with most known facts. i.e. it must be consistent with
a substantial body of established facts.
✓ The hypothesis must explain the facts that gave rise to the need for explanation. It must
actually explain what it claims to explain.
As we have discussed the Null hypothesis (Ho) and Alternative Hypothesis (Ha) earlier so
while testing hypothesis we generally proceed on the basis of Null hypothesis (Ho), keeping
the Alternative hypothesis in view. We do so because on the assumption that Null hypothesis
is true, one can assign the probabilities to different possible sample results, but this cannot be
done if we proceed with the Alternative hypothesis. Hence the use of null Hypothesis is quite
frequent. While testing the Hypothesis the following things to be kept in mind:
Level of significance: This is a very important concept in the context of hypothesis testing. It
is always some percentage (usually 5%) which should be chosen with great care, thought
and reason. In case we take the significance level at 5%, then this implies that Ho will be
rejected when the sampling result (i.e observed evidence) has a less than 0.05 probability of
occurring if Ho is true. In other words, the 5% level of significance means that researcher is
willing to take as much as a 5% risk of rejecting the Null hypothesis when it happens to be
10
true. Thus, the significance level is the maximum value of the probability of rejecting Ho when
it is true and is usually determined in advance before testing the hypothesis.
✓ The criteria for rejecting the null hypothesis may differ. Sometimes the Null hypothesis
is rejected only when the quantity of the outcome is so large that the probability of its
having occurred by mere chance is 1 times out of 100. We consider the probability of
its having occurred by chance to be too little and we reject the chance theory of the
Null hypothesis and take the occurrence to be due to genuine tendency. On the other
occasions, we may reject the Null hypothesis even when the quantity of the reported
outcome is likely to occur by chance 5 times out of 100. Statistically the former is
known as the rejection of Null hypothesis at 0.1 level and the latter is known as the
rejection at 0.5 level. It may be pointed out that if the researcher is able to reject the
Null hypothesis, he cannot directly uphold the declarative hypothesis. If an outcome is
not held to be due to chance, it does not mean that it is due to the very cause and effect
relationship asserted in the particular declarative statement. It may be due to something
else which the researcher may have failed to control.
✓ Declaration rule or test of hypothesis: Given a Null hypothesis (Ho) and Alternative
hypothesis (Ha), we make a rule which is known as decision rule according to which
we accept Ho (i.e reject Ha)or reject Ho(i.e accept Ha). For instance, if Ho is, that a
certain lot is good (there are very few defective items in it) against Ha that the lot is
not good (there are too many defective items in it), then we must decide the number of
items to be tested and the criterion for accepting or rejecting the hypothesis. We might
test 10 times in the lot and plan our decision saying that if there are none or only 1
defective item among the 10, we will accept Ho otherwise we will reject Ho (or accept
Ha). This sort of basis is known as decision rule.
✓ Two-tailed and one-tailed test: In the context of hypothesis testing, these two terms are
quite important and must be clearly understood. A two-tailed rejects the Null
hypothesis if, say, the sample mean is significantly higher or lower than the
hypothesized value of the mean of the population. Such a test is appropriate when the
Null hypothesis is some specified value and the Alternative hypothesis is a value not
equal to the specified value of Null hypothesis. In a two-tailed test, there are two
rejection regions, one on each tail of the curve which can be illustrated as under:
11
❖ If the significance level is 5% and the two-tailed test is to be applied, the probability
of the rejection area will be 0.005 (equally divided on both tails of the curve is 0.0025)
and that of the acceptance region will be 0.95.
❖ But there are situations when only one-tailed test is considered appropriate. A one-
tailed test would be used when we are to test, say, whether the population mean is either
lower than or higher than some hypothesized value. We should always remember that
accepting Ho, on the basis of sample information does not constitute the proof that Ho,
is true. We only mean that there is no statistical evidence to reject it.
100 that we will reject Null hypothesis when Null hypothesis is true. We can control
Type-I error just by fixing at a lower level. For instance, if we fix it at 1%, we will say
that the maximum probability of committing Type-I error would only be 0.01.
12
But with the fixed sample size, when we try to reduce Type-I error, the probability of
committing Type-II error increases. Both types of errors cannot be reduced simultaneously.
There is trade off between two types of errors which means that the probability of making one
type error can only be reduced if we are willing to increase the probability of making the other
type of error. One must set a very high level for Type-I error in one’s testing technique of a
given hypothesis. Hence, in the testing of hypothesis, one must make all possible efforts to
strike an adequate balance between Type-I and Type-II errors.
13