Professional Documents
Culture Documents
Group Work Booklet: Hazard Analysis Fundamentals of Food Safety As Per ISO 22000 / FSSC 22000 V 5
Group Work Booklet: Hazard Analysis Fundamentals of Food Safety As Per ISO 22000 / FSSC 22000 V 5
ISOWORK
[GROUP 22000 / FSSC 22000
BOOKLET: v 5ANALYSIS]
HAZARD
Training Provider:
1. Construct the flow diagram for the process allocated to your group. Identify main process step and sub process steps, area and the area owner
(Example given below)
Step No. Main Steps Sub Steps Identify Process Area Area Owner
Exampl Sugar Receiving Receipt of Sugar bags
Incoming Inspection
Unloading on pallets in clean area
e
Coding of bags
Sugar Stores In
Sugar Dumping Shifting required number of Sugar bags to dumping area Sugar Storage Area
Charge
Opening the thread of bags and keep them in series
Weighing sugar bags
Dumping the bags to Sugar hopper
Keeping empty bags at designated place
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step No. Main Steps Sub Steps Identify Process Area Area Owner
Step 7
Step 8
Step 9
Step 10
Determine methodology for
Hazard Assessment
Control Measure Assessment
OPRP /
Selection of Control measure Assessment of Control Measure
CCP?
measurable /observable
combination of control whether it is a single
reduce the hazards to an
in case of failure
Define the control measure (s) its functioning
measure
action criteria
Examples of questions to be considered when conducting a Hazard Analysis for potential hazards from MATERIAL:
Ingredients
Does the food contain any sensitive ingredients that may present microbiological hazards (e.g., Salmonella, Staphylococcus aureus); chemical
hazards (e.g., aflatoxin, antibiotic or pesticide residues); or physical hazards (stones, glass, metal)?
Are potable water, ice and steam used in formulating or in handling the food?
What are the sources (e.g., geographical region, specific supplier)
Packaging
Does the method of packaging affect the multiplication of microbial pathogens and/or the formation of toxins?
Is the package clearly labeled "Keep Refrigerated" if this is required for safety?
Does the package include instructions for the safe handling and preparation of the food by the end user?
Is the packaging material resistant to damage thereby preventing the entrance of microbial contamination?
Are tamper-evident packaging features used?
Is each package and case legibly and accurately coded?
Does each package contain the proper label?
Are potential allergens in the ingredients included in the list of ingredients on the label?
on
Potential
PROCESS
Hazards from
Pasteurizati
Exact Name of the Hazard
Source
Contaminate,
Severity
in case of failure
control
needed?
Justify,
measure
CCP?
OPRP /
Examples of questions to be considered when conducting a Hazard Analysis for potential hazards from PROCESS:
Intrinsic Factors - Physical characteristics and composition (e.g., pH, type of acidulants, fermentable carbohydrate, water activity, preservatives) of the
food during and after processing.
What hazards may result if the food composition is not controlled during processing or storage conditions?
Does the food permit survival or multiplication of pathogens and/or toxin formation in the food during processing?
Will the food permit survival or multiplication of pathogens and/or toxin formation during subsequent steps in the food chain?
Are there other similar products in the market place? What has been the safety record for these products? What hazards have been associated
with the products?
Contaminate,
Severity
in case of failure
control
needed?
Justify,
measure
CCP?
OPRP /
Examples of questions to be considered when conducting a Hazard Analysis for potential hazards from EQUIPMENT:
Will the equipment provide the time-temperature control that is necessary for safe food?
Is the equipment properly sized for the volume of food that will be processed?
Can the equipment be sufficiently controlled so that the variation in performance will be within the tolerances required to produce a safe food?
Is the equipment reliable or is it prone to frequent breakdowns?
Is the equipment designed so that it can be easily cleaned and sanitized?
Is there a chance for product contamination with hazardous substances; e.g., glass?
What product safety devices are used to enhance consumer safety?
- metal detectors
- magnets
- sifters
- filters
- screens
- thermometers
- dud detectors
To what degree will normal equipment wear affect the likely occurrence of a physical hazard (e.g., metal) in the product?
Are allergen protocols needed in using equipment for different products?
Potential
Hazards from
ENVIRONMENT
Hazard
Name of the
Exact
Source
Contaminate,
Severity
in case of failure
control
needed?
Justify,
measure
CCP?
OPRP /
Examples of questions to be considered when conducting a Hazard Analysis for potential hazards from ENVIRONMENT:
Does the layout of the facility provide an adequate separation of raw materials from ready-to-eat (RTE) foods if this is important to food safety? If
not, what hazards should be considered as possible contaminants of the RTE products?
What are potential sources of hazards coming from nearby industries/ localities/ drains etc?
Is positive air pressure maintained in product packaging areas? Is this essential for product safety?
Is the traffic pattern for people and moving equipment a significant source of contamination?
Can sanitation have an impact upon the safety of the food that is being processed?
Can the facility be easily cleaned and sanitized to permit the safe handling of food?
Is it possible to provide sanitary conditions consistently and adequately to assure safe foods?
HUMAN
Potential
Hazards from
Hazard
Name of the
Exact
Source
Contaminate,
Severity
in case of failure
control
needed?
Justify,
measure
CCP?
OPRP /
Examples of questions to be considered when conducting a Hazard Analysis for potential hazards from HUMAN:
Can employee health or personal hygiene practices impact upon the safety of the food being processed?
Do the employees understand the process and the factors they must control to assure the preparation of safe foods?
Will the employees inform management of a problem which could impact upon safety of food?