STX Infuzium 420 Instructions
STX Infuzium 420 Instructions
Instructions
STX INTERNATIONAL © 2019
SPECIFICATIONS
Model STX-INZ-420
Power Supply 110/120 V, 60 Hz
Capacity 4 Cups
Net Weight 8 lbs.
Overall Dimensions (L x W x H) 7.0” x 8.2” x 12.5”
UNIT DESCRIPTION
Full Unit
Easy-to-Read
LED Digital
Display Lift Off Top
Simple to Handle
Operate Function
Options
Convenient
Side Handle
Electrical Plug
Connector
-1-
PACKAGE CONTENTS
• Main Unit
• 3 Spatulas
• Instruction Manual
FEATURES
• 15,000 RPM Mixer/Blender
-2-
SAFETY PRECAUTIONS
1. This unit gets hot while in use. Please use caution while handling
unit. Always pick up unit by handle.
7. Never remove the head during operation. Always ensure the unit
is seated correctly prior to operation.
9. Do not over fill the unit. The maximum amount of product in the
unit is 4 cups.
10. Do not leave the unit unsupervised at any time during operation.
-3-
PREPARATION
Decarboxylation (Decarb) - What is it?
How to Decarb
1. Preheat the oven or toaster oven to 225°F to 240°F.
- 225°F is recommended to preserve flavor and potency
- 240°F is recommended to minimize flavor while preserving
potency
2. Spread the ground herbs in a single layer on an oven proof glass
baking dish.
3. Insert the dish with herb in an oven bag (like the ones used to
bake a turkey) and tie oven bag tight (this will contain the smell
during this process).
4. Place pan on middle rack in the center of the oven and bake for
40 minutes.
5. When it is finished, remove the pan from the oven and allow it
to cool completely while still sealed in the bag. Placing it in the
freezer will speed up this process.
6. Once cooled it is ready to be Infused!
Note: If you are not ready to infuse, keep the decarbed botanical
materials in a mason jar at room temperature until you are ready
to use them.
You can then either use your Decarbed Herbs or store them in a mason
jar at room temperature until you are ready to infuse them.
-4-
OPERATING INSTRUCTIONS
1. Connect the power cord to the bottom of the side handle on the
unit and plug the other end into the electrical outlet
(110/120V 60 Hz only)
2. Load the chamber with the ingredients (see below based on what
type of infusing is being done).
3. Place the head unit securely on top of the pot (unit will not turn
on if this is not placed securely). The LED display will light up
indicating the unit is on.
4. Press the select button to choose the desired MODE (Oil, Butter,
Tincture, DIY, Clean)
5. If the Preset time and temperature settings are being used (see
chart below), then press START.
6. If you wish to customize the time, press the TIME+ or TIME-
button on the digital control panel until the preferred setting is
reached. If you wish to customize the temperature, press the
TEMP+ or TEMP- button on the contorl panel until the preferred
settings is reached. Then press the START to confirm the settings
and begin the infusion.
Note: The unit will start to heat up at this point. The blade does not start
to spin immediately.
Note: If at any time while the unit is running you need to interrupt it you
can hold down the START button for 4 seconds. This will stop
the cycle that is in process and reset the unit. Once the unit is
stopped you can remove the top.
7. The red LED at the top of the side handle will illuminate. This
indicates that the unit is running and should not be disturbed.
During this time the LED digital display will count down the time
remaining.
Note: The blade does not run continuously while the unit is running. The
unit works with a combination of heat and blending, the blade
spins on and off throughout the cycle.
8. When the unit has completed its cycle the LED will turn green and
the LED digital display will read END – indicating that it is done.
-5-
9. Select the purification filter. Two filters are included with the unit,
73 mesh and 190 mesh. The 73 filter is a finer mesh, this will work
well for tinctures and better purification. The 190 mesh works well
for butter and oils.
10. Remove the top of the unit and set it aside. Hold the filter of
choice over the butter molds or whatever you want the filtered
herb infused product to go into.
Note: Please be careful! The finished product being poured from the unit
is hot! Use the silicone oven mitt included to ensure you do not
burn yourself.
11. Once the product is in the filter you may want to squeeze the filter
to push the product out, as some of the product may be caught in
with the herb in the filter.
TIME TEMP
+ +
OIL BUTTER DIY
TIME TEMP
- TINCTURE CLEAN -
SELECT START
-6-
DETERMINING SETTING
The Infuzium 420 has 5 presets to allow for easy use (see chart below).
If you want to try your own settings, you can select Do-It-Yourself (DIY).
The DIY setting is preset, but once it is selected you can use the + and -
buttons for Temp and Time to adjust accordingly.
To choose the setting you want to use, press the select button until the
LED light above the option you want is lit.
Once a preset has been selected, you can change the time and
temperature to customize the setting. This is done by pressing the + or -
on temp or time to adjust accordingly.
PRESETS
MODE TEMP (°F) TIME (hours)
Oil 160°F 1:00
Butter 160°F 2:00
DIY 160°F 1:30
Tincture 160°F 4:00
Clean -- --5*
* This indicates 5 cycles
The cleaning preset runs for just a little over 2 minutes. The blade will
rotate for about 20 seconds and then stop for about 5 second. It cycles
through this 5 times. When it is complete the LED at the top of the side
handle will turn green.
-7-
BASE RECIPES
See the Official Infuzium 420 All Inclusive Cookbook for over 80 recipes
and tips!
BUTTER
1-5 cups softened butter - preferably clarified butter (ghee) -
Do not use margarine.
1/4 to 1 oz decarbed cannabis per cup
1 Tbsp sunflower lecithin powder per cup
OIL
1-5 cups cooking oil (Best is coconut oil. Can also use olive,
sesame, avocado or peanut oil, but do not use canola or corn
oil.)
1/4 to 1 oz decarbed cannabis per cup
1 Tbsp sunflower lecithin powder per cup
Pour into airtight mason jars, or back into the original oil jar.
TINCTURE
1-5 cups Everclear, 151 or 190 proof (or vegetable glycerin)
1/4 to 1 oz decarbed cannabis per cup
-8-
CLEANING
WARNING: Do NOT submerge ANY part of the unit in water.
Main Unit
1. Rinse out the inner chamber.
2. Fill the pot halfway between the MIN and MAX line (about 2 1/2
cups) with warm water.
3. Add a small drop of mild dishwashing detergent (like Dawn Liquid
Detergent) to the water.
4. Place the unit head on top of the unit.
5. Select the clean preset option and press start.
6. The clean cycle will run for about 2 1/2 minutes. During this
time the blade will cycle on about every 20 seconds for about 5
seconds (5 cycles).
Note: During the cleaning cycle, the unit does not heat the liquid.
The cleaning solution may get slightly warmer from the blade
movement.
7. When the cleaning cycle is complete, the LED digital display
will say END and the light on the top of the side handle will turn
green.
8. Remove unit head, dump the soapy water, rinse and towel dry.
Outside of Unit
Wipe the surface with a damp rag to clean any part of the outer surface.
Filters
The filters included with our unit are easy to clean. They are dishwasher
safe (top rack).
The filters can also be washed in the washing machine with the hot water
setting. Filters should air dry. They should NOT be put in the dryer.
Note: When washing the filters in the washing machine do NOT wash
them with anything that the oils could ruin or stain.
-9-
TROUBLESHOOTING
Issues Solutions
The machine does not turn Check to ensure the machine is plugged
on. in to an outlet.
- 10 -
ADDITIONAL SAFETY INSTRUCTIONS
1. Please read all instructions prior to operating this unit.
Please keep this manual for future reference. Failure to comply with
the safety instructions and/or operating instructions contained in this
manual will void any warranty. The manufacturer/seller accepts no liability
for damages caused by failure to comply with the owner’s manual or
negligent use of this product.
2. Check for damaged parts prior to use. check that all parts are operating
properly and perform their intended functions.
3. Always check the condition of the power cord prior to use. If there is any
evidence of damage or fraying of the power cord discontinue use and
contact STX International for OEM replacement. (see Contact Information
on the back of this manual) STX International will only use original OEM
parts when/if replacement is necessary.
4. Always disconnect the unit from the power source before servicing or
cleaning the unit. Unplug the unit when not in use. Do not plug the unit
into an already damaged outlet.
5. This product is designed for indoor household use only. It is NOT a
commercial use product. Do NOT use for commercial or industrial
purposes.
6. Do NOT operate outdoors or near any flammable or combustible
materials. Do NOT use during electrical storms.
7. Keep out of the reach of children. Never leave this device unattended.
8. It is important to monitor this product while in use. Do not leave this unit
unattended when plugged into an outlet or powered ON.
9. To prevent electric shock and damage to the unit, do NOT immerse the
unit in water.
10. Do not operate this unit near an open flame or any hot surface.
11. Do not unplug the unit by pulling on the electrical cord itself. Never
unplug the unit with wet hands.
12. Always use 110/120 Volt power sources. DO NOT USE POWER
CONVERTERS (210/220V).
13. Do not plug another high wattage appliance into the same outlet as this
product.
14. Do NOT operate under the influence of alcohol or drugs.
15. Any alteration of this unit’s components, substitution of other
manufacturer’s components to this unit, or any repairs to this product not
completed or authorized by STX International will immediately void all
guarantees/warranties.
16. Electrical repair or any other type of service must be done by the seller
(The Mercantile Station 2 / STX International). Proof of purchase must be
provided by consumer prior to any repair/service acceptance. The seller
will use only OEM parts and accessories.
- 11 -
3-YEAR
WARRANTY
All STX International Products come with a 3-Year Guarantee, valid only in
the United States and Canada. If you purchase this product and ship it to a
destination outside of the United States or Canada this warranty becomes
null and void.
The first 30 Days are covered by a Money Back or Replacement
Guarantee from the date the product was received. If your product
becomes damaged in shipment or is found to be defective in any way
during this 30-day period, we will replace or issue a complete refund for
your product upon return of the defective/damaged product.
Returns of New/Unused Products
If you have Buyer's Remorse and decide that you do not want the product,
it must be returned NEW & UNUSED in the original box and you will pay
the return shipping. PLEASE NOTE: There will be a 10% Restocking Fee
and original Shipping Costs (if applicable) will not be refunded. Used
product cannot be returned.
How To Register Your Warranty
Go to www.STXInternational.com. Click on "Support", then "Register Your
Warranty" and fill out the form. This is a secure website. Your information
will never be sold or misused in any way. This registration site is strictly
for order verification that will be used to speed up the process should you
ever need to use your Warranty for service.
STX International
2159 Magnum Circle, Lincoln, NE 68522
[email protected] • www.STXInternational.com
- 13 -
QUESTIONS, PROBLEMS
OR COMPLIMENTS?
Thank You for purchasing this
STX International Product!
We are grateful for your business!
STX International
2159 Magnum Circle, Lincoln, NE 68522
[email protected] • www.STXInternational.com