Professional Documents
Culture Documents
Deck Officer
Deck Officer
Previous Experience ?
Where you work and Location ?
Type of vessel and which company ?
My Name Is ……….I Live In …………My Last Experience Is In
…………
Trading Area Is Indonesia Water In…
Under Management Of ……………….. and Charter By …………
SHIPS DOCUMENTS/ SHIPS CERTIFICATES
A. Certificate of registry
B. Certificate of classification.
C. International Tonage Certificate.
D. International Load Line.
E. Navigation license & Certificate of Seaworthiness.
F. Safe manning Document.
G. Ship station licence.
H. Cargo ship safety Radio certificate.
I. Cargo ship safety construction certificate.
Y. Cargo ship safety equipment Certificate.
K. IOPP. Certificate.
L. Statement of compliance for Air pollution prevention.
M. Statement of compliance for Sewage pollution
prevention.
N. Document of Compliance.
O. International ship security Certificate.
P. Safety management Certificate.
Q. Certificate of Insurance.
R. Shore base maintenance GMDSS.
S. Continuous synopsis Record. etc.
TIDE TABLE
- What is this and what for and how to use it.?
We can use BA chart and the tide table is check position we
can see high water or low water. if does have, we can used
secondary port.
Use local chart and local tide table.
COMPAS ERROR
On port as along said in jetty we can bearing the object that
have on the chart compare with the gyro so can know the
error.
In channel we use leading light,bearing the leading light make
it on one line.with the astronomical bearing like
sun,moon,star,use nautical almanac table when error coming
from steel that from cargo or platform it self that can make
influense to the vessel & compass error = d – v .dev from dev
chart,var.from the chart.
GARBAGE
For food waste 3 miles from shore, material waste oil below
15 ppm, we can drop over 12 miles.
Anchor handling procedure
First thing we have meeting held on board or safety meeting
including discussing all job for all crew so they know there
responsibility.
We have also have anchor handling check list,we check all
equipment.
Discussed with c/e to prepare control station layout anchor
handling drum tugged winch shark jaw,towing pin.
On deck give order to boatswain to check all equipment on
deck like also were shackle 85 tons pelican hook,manual
stopper use for hold the weigh from 10 – 110 tons
Communication vhf working channel must in good
appear,weather forecast,characteristic anchor & buoy,anchor
pattern.
STABILITY
- What information we need before to calculate the
stability ? > Draft, Dencity of Sea Water, total Cargo
onboard or total cargo discharge / offload. , Fresh water
onboard, Fuel Oil onboard stability book etc.
- How to calculate GM ?
- What is the Minimum GM. > 0.15 Meter.
GM=KM-KG TPC = (1,025 X L XB) FWA = displacement
40 TPC
DWA = FWA – (Bj DW / BJ SU-BJFW/BJ FW)