GeneralCatalog E 2017-2018 L PDF
GeneralCatalog E 2017-2018 L PDF
Japan
Italy
U.K.
China
Thailand
Singapore
Headquarters
Affiliates
Please read the "Safety Warnings" in the instruction manual supplied with the instrument thoroughly and completely
Safety Warnings : for correct use. Failure to follow the safety rules can cause fire, trouble, electrical shock, etc. Therefore, make sure
to operate the instrument on a correct power supply and voltage rating marked on each instrument.
In consideration of the environment, soy ink and recycled paper were used in this publication. The contents of this leaflet are subject to change without notice. GeneCata17-18_1E Nov. 17 AD
Ior LOGGER PORTABLE APPLIANCE TESTER
MULTIMETERS
P.8 - P.15
1009, 1011/1012, 1018/1018H, 1019R, 1020R/1021R, 1030, 1051/1052,
1061/1062, 1109S, 1110, 2000/2001, 2012R
SYMBOLS
● CLAMP METERS
CLAMP METERS
TRUE RMS
P.16 - P.27
CAT Ⅳ
CAT Ⅳ 600V
2002PA/2002R, 2003A, 2007R, 2009R, 2010, 2031, 2033, 2046R,2055/2056R,
600V 2117R, 2127R, 2200/2200R, 2204R, 2210R, 2300R, 2413F/2413R, 2431,
2432,2433/2433R, 2434, 2500/2510, 2608A, 8112/8112BNC, 8115, 8161
DC
AC V DC/AC V
● INSULATION TESTERS
INSULATION TESTERS
AC A
DC DC/AC A P.28 - P.39
3005A, 3007A, 3021A/3022A/3023A, 3025A/3125A, 3121B/3122B,
DC V
DC Voltage 3123A, 3124, 3127, 3128, 3131A, 3132A, 3161A, 3165/3166, 3431
AC V AC Voltage ● EARTH TESTERS
EARTH TESTERS
P.40 - P.45
DC A
DC Current (A) 4102A, 4105A, 4105DL, 4106, 4200/4202, 4300
AC A AC Current (A)
PORTABLE APPLIANCE
● PORTABLE APPLIANCE TESTERS
P.49 - P.50
Ω
TESTERS
Resistance 6201A, 6205
Continuity buzzer
MULTI FUNCTION
Diode
P.51 - P.57
TESTERS
6010B, 6011A, 6016, 6018, 6024PV
Capacitance
°C
Temperature
● POWER METERS
POWER METERS
Hz
Frequency
6305, 6315
P.58 - P.63
dB
Decibel
LOGGERS
P.64 - P.67
5010/5020, 5050
NCV Non Contact Voltage
Back light
● SENSORS
SENSORS
WP Water proof
8121, 8122, 8123, 8124, 8125, 8126, 8127, 8128, 8129, 8130, 8141,
P.68 - P.70
PEAK 8142, 8143, 8146, 8147, 8148, 8177, 8178, 8309
HOLD Peak hold
DATA
HOLD Data hold ● OTHERS
OTHERS
P.71 - P.73
AUTOOFF
POWER Auto power off 5201, 5202, 5510, 5711, 8030, 8031/8031F, 8035
AUTO
SAVE
POWER Auto power save
OUT ● KEWTECH
KEWTECH
Output
PUT P.74 - P.75
KT170/171, KT200, KT203
Filter
Filter
REL
Relative
● ACCESSORIES
ACCESSORIES
USBUSB
QUALITY CONTROL CONCEPT
PRODUCT INDEX
Low power Ω
P.82 - P.87
Bluetooth
Bluetooth
Please read the “Safety Warnings” in the instruction manual supplied with the instrument thoroughly and completely for
Safety Warnings safety use. Failure to follow the safety rules can cause fire, trouble, electrical shock, etc. Therefore, make sure to operate the
instrument on a correct power supply and voltage rating marked on each instrument.
KYORITSU LINE UP
ANALOGUE MULTIMETERS DIGITAL MULTIMETERS
KEW 1109S MODEL 1110 MODEL 1009 KEW 1011/1012 KEW 1018/1018H KEW 1019R
P11 P11 P11 P11 P12 P12
1012
2002R 2200R
2056R 2413R
ANALOGUE INSULATION/CONTINUITY TESTERS ANALOGUE INSULATION TESTERS HIGH VOLTAGE INSULATION TESTERS
MODEL 3131A MODEL 3132A MODEL 3161A MODEL 3165/3166 KEW 3431 KEW 3121B/3122B
P32 P32 P33 P33 P33 P34
NEW
3165(500V) 3121B(2500V)
3131A(250V/500V/1000V) 3132A(250V/500V/1000V) 3161A(15V/500V) 3166(1000V) 3431(250V/500V/1000V) 3122B(5000V)
NEW
NEW NEW
4
DIGITAL MULTIMETERS
KEW 1020R/1021R KEW 1030 KEW 1051/1052 KEW 1061/1062 MODEL 2000 φ6 MAX
AC/DC 60A KEWMATE 2012R
MODEL 2001
φ10 MAX
P10 P12 P14 P14 AC/DC 100A
P13
P13
φ12
NEW MAX
AC/DC 120A
2433R
3125A(250/500/1000/2500/5000V)
3123A(5000/10000V) 3124(1k -10kV Variable) 3025A(250/500/1000/2500V) 3127(250/500/1000/2500/5000V) 3128(500/1000/2500/5000/10000/12000V)
NEW
OTHERS KEWTECH
MODEL 5510 KEW 5711 KEW 8035 MODEL 8030 MODEL 8031 KEW 8031F KT 170/171 KT 200/203
P72 P72 P73 P73 P73 P73 P75 P74
φ30
NEW MAX
AC 400A
www.kew-ltd.co.jp 5
APPLICATIONS
INDUSTRIAL
Solar Photovoltaic
Panels
KEW 8035
KEW 2046R P73
Lighting P23
measurement DC current
DC measurement
MODEL 5202 P71
MODEL 5406A P48
Solar
Inverter
Phase rotation check
(on insulated wires)
AC
KT171
RCD measurement
P75
Voltage check
Loop measurement
Power Quality &
Leakage Earth Leakage
P37 Energy Measurement
KEW 3128 L1
Current Logger measurement
L2
L3
N
High Voltage PE
insulation resistance &
Diagnostic (PI, DD,
DAR, SV)
KEW 5050
KEW 4106 P44 KEW 6315 P66
Earth P62
measurement
(large installation) KEW 6016 P54
Charger
Gas
Appliance Safety testing
+ –
Earth electrode
KEW 4202 measurement by Earth clamp
BATT
P45
6
RESIDENTIAL
KEW 6024PV P56
Solar Photovoltaic
panels
PV Insulation
measurement
Lighting
measurement
Solar
P72 Inverter AC
KEW 5711
Voltage detect
P13
KEW MATE 2012R
KEW 6305 P60
Insulation resistance
measurement
KT170 P75
L
KEW 4140
P47
Loop
measurement H2O
Gas
Continuity Insulation
Appliance Loop RCD Earth measurements
Safety Testing
KEW 4105DL
P42
Earth
measurement
www.kew-ltd.co.jp 7
MULTIMETERS
MULTIMETERS
MULTIMETERS
8
MULTIMETERS
Selection Guide of Multimeters
Analogue Multime-
Digital Multimeters
MULTIMETERS
ters
1018 1019R 1020R 1021R 1030 1009
1109S 1110 1018H 1011 1051 1061 2000
1012 1052 1062 2001 2012R
Appearance
Detection − − −
method
− − (1012)
−
Maximum − − 4000 6000 6000 6000 4000 4000 6000 6000 50000 3400 6000
count display
DC Basic ±3% of FS ±3% of FS 0.8% 0.8% 0.5% 0.5% 0.8% 0.6% 0.5% 0.09% 0.02% 1.5% 1.0%
accuracy
Frequency 10 - 20kHz(1061)
response 30 - 20kHz 50 - 5kHz 50 - 400Hz 45 - 500Hz 40 - 500Hz 40 - 500Hz 50 - 400Hz 50 - 400Hz 40 - 1kHz 40 - 1kHz 50 - 400Hz 45 - 400Hz
10 - 100kHz(1062)
Measurement
Max 1000V 600V 600V 600V 1000V 600V 600V 600V 600V 1000V 1000V 600V 600V
DC V
Resolution 0.002V 0.005V 0.1mV 0.1mV 0.1mV 0.1mV 0.1mV 0.1mV 0.1mV 0.1mV 0.001mV 0.1mV 0.1mV
Max 1000V 600V 600V 600V 1000V 600V 600V 600V 600V 1000V 1000V 600V 600V
AC V 0.01mV(1061)
Resolution 0.2V 0.2V 0.001V 0.001V 0.1mV 0.1mV 0.001V 0.1mV 0.001V 0.1mV 0.001mV(1062) 0.001V 0.001V
DCA DC A 250mA 300mA − − − 10A − 10A 10A 10A 10A
60A(2000)
100A(2001) 120A
AC A
60A(2000)
ACA − − − − − 10A − 10A 10A 10A 10A 100A(2001) 120A
DC+AC DC+AC − − − − − − − − − − − −
Resistance Ω 20MΩ 300KΩ 40MΩ 40MΩ 40MΩ 40MΩ 40MΩ 40MΩ 60MΩ 60MΩ 50MΩ 34MΩ 60MΩ
Continuity buzzer −
Battery test − − − − − − − − − − − −
Diode test − − − −
Capacitance − − 200µF 600µF 1000µF 1000µF 100µF 100µF 4000µF 1000µF 50mF − 40µF
ACA 9.999kHz ACA 10kHz ACA 400Hz
Frequency Hz − − 10kHz − ACV 99.99kHz
ACV 99.99kHz 200kHz 10MHz 10MHz 99.99kHz 99.99kHz ACV 300kHz ACV 300kHz
Test leads 7066A 7066A − − 7066A 7066A − 7066A 7066A 7220A 7220A − −
8216(1011)
8923 × 1 8918 × 1 8926 × 1 8926 × 1
Accessories Fuse 8901 × 2 8923 × 2 − − − 8919 × 1 −
8919 × 1 8919 × 1 8927 × 1 8927 × 1
− −
Case 9115(1018)
− 9013 9114(1018H) 9188 − 9097 9130 − − − − − −
www.kew-ltd.co.jp 9
MULTIMETERS
KEW 1020R NEW /1021R
MULTIMETERS
1020R 1021R
CAT Ⅱ
1000V
DC
AC V DC
AC A Ω Hz DUTY
DATA AUTO POWER
HOLD REL MAX/MIN SAVE
1020R 1021R
DC V 6.000/60.00/600.0/1000V(auto range) 6.000/60.00/600.0V(auto range)
±0.5%rdg±3dgt(6/60/600V) ±0.8%rdg±3dgt(1000V) ±0.5%rdg±3dgt
DC mV 600.0mV ±1.5%rdg±3dgt
DC Clamp Sensor 60.00/200.0A(auto range) ±1.5%rdg±3dgt + Sensor accuracy
AC V 6.000/60.00/600.0/1000V(auto range) 6.000/60.00/600.0V(auto range)
±1.0%rdg±3dgt [40 - 500Hz] (6/60/600V) ±1.0%rdg±3dgt [40 - 500Hz]
±1.3%rdg±3dgt [40 - 500Hz] (1000V)
AC mV 600.0mV ±2.0%rdg±3dgt [40 - 500Hz]
AC Clamp Sensor 60.00/200.0A(auto range) ±2.0%rdg±3dgt + Sensor accuracy [40 - 500Hz]
DC A — 6.000/10.00A(auto range) ±1.5%rdg±3dgt
AC A — 6.000/10.00A(auto range) ±1.5%rdg±3dgt [40 - 500Hz]
Ω 600.0Ω/6.000/60.00/600.0kΩ/6.000/40.00MΩ (auto range)
±0.5%rdg±5dgt(600Ω), ±0.5%rdg±2dgt(6/60/600kΩ/6MΩ), ±1.5%rdg±3dgt(40MΩ)
Continuity buzzer 600Ω (Buzzer sounds below 90Ω)
Diode test Open-loop Voltage:<3.0V
Capacitance 60.00/600.0nF/6.000/60.00/600.0/1000μF ±2.0%rdg±15dgt(60n/600nF), ±5%rdg±10dgt(6/60/600/1000μF)
Frequency ACV 99.99/999.9Hz/9.999/99.99kHz ±0.1%rdg±3dgt ACA 99.99/999.9Hz/9.999kHz ±0.1%rdg±3dgt*1
DUTY 10.0 - 90.0% ±1.0%rdg±3dgt [50/60Hz]
Applicable Standards IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V / CAT Ⅱ 1000V * 2 Pollution degree 2, IEC 61010-2-033, IEC 61010-031
IEC 61326-2-2(EMC), IEC 60529 IP40, EN 50581(RoHS)
Power source R03(AAA)(1.5V) × 2
Dimensions 155(L) × 75(W) × 40(D) mm (with Wing-type holder)
Weight 250g approx. (including batteries and Wing-type holder)
Accessories Wing-type holder Wing-type holder, Flat-type holder, 7066A(Test leads)
7066A(Test leads) 8919(Ceramic fuse[10A/600V]) × 1(included),
R03(AAA) × 2, Instruction manual 9097(Carrying case), R03(AAA) × 2, Instruction manual
Optional Accessories 7234(Alligator clip), 8161(AC Clamp sensor), 8115(AC/DC Clamp sensor), 9189(Magnet hanger strap)
*1 1021R only *2 1020R only
AC
wing-type Holder MODEL 7066A MODEL 7234 KEW 8161 MAX
100A Ø24
Test leads Alligator clip AC Clamp sensor
1021R Only
Flat-type Holder Fuse 10A/600V Carrying case MODEL 9189 KEW 8115 Ø12 MAX
130A
MAX
180A
(Included) Magnet hanger strap AC/DC Clamp sensor
10
MULTIMETERS
MODEL 1009 KEW 1011/1012
MULTIMETERS
DC
V DC
A Ω 1012
AC AC
DATA AUTO POWER
DC
AC V DC
AC A Ω
Hz DUTY HOLD REL OFF 1011 1011
Hz DUTY °C DATA
HOLD MAX/MIN
• Display : 4000 counts.
AUTO POWER
• Auto range and manual range selector
REL OFF
provided. (with range hold feature) • 6040 counts with Bar Graph display
• Resistance range provides audible con- • MIN/MAX function enables to record
tinuity test. min & max value
• Automatically turns power off in about • REL(relative value) function
30 minutes to conserve battery life.
• Temperature measurement, selectable
• Direct current measurement up to 10A for °C and °F (KEW 1011)
AC and DC.
• True RMS can measure and indicate
distorted waveforms (KEW 1012)
• DUTY function
photo : 1012
KEW 1109S DC V
1109S
0.1/0.5/2.5/10/50/250/1000V(20kΩ/V) ±3% of FS
AC V 10/50/250/1000V(9kΩ/V) ±3% of FS
DC
AC V DC A Ω dB
DC A 50µA/2.5/25/250mA ±3% of FS
• Mirrored scale for easy and accurate Ω 2/20kΩ/2/20MΩ ±3% of scale length
reading. Decibel -10 - +62dB
• Output terminal to cut off DC compo- hFE 0 - 1000(Ω × 10) ±3% of scale length
nent when measuring AC voltage. Power source R6(AA)(1.5V) × 2, 6F22(9V) × 1
• Safety designed input terminals and Dimensions 150(L) × 100(W) × 47(D)mm
test leads. Weight 330g approx.
Accessories 7066A(Test leads), 8901(Fuse[0.5A/250V]) × 2,
R6(AA) × 2, 6F22 × 1, Instruction manual
Optional 9168(Carrying case)
MODEL 1110 DC V
1110
0.3V(16.7kΩ/V) ±3% of FS 3/12/30/120/300/600V(20kΩ/V) ±3% of FS
AC V 12V(9kΩ/V) ±4% of FS 30/120/300/600V(9kΩ/V) ±3% of FS
DC
AC V DC A Ω °C DC A 60µA/30/300mA ±3% of FS
• High sensitivity DC20kΩ/V. Ω 3/30/300kΩ ±3% of scale length
• 1m drop-proof heavy duty design. Continuity buzzer Buzzer sounds below 100Ω
Battery Test 1.5V(0.7 - 2V) ±3% of FS (10Ω load)
• Can measure line voltage up to AC 600V.
(Voltage to ground MAX AC 300V) Temperature Note: The MODEL1110 includes a temperature measurement
(Protected by 600V ceramic fuse against scale, but it is not available for new customers due to the discon-
accidental overload) tinue of the Temperature Probe 7060.
LED 10mA approx. at 0Ω (at 3V of battery voltage)
• Continuity buzzer, battery check, LED
check function. Applicable Standards IEC 61010-1 CAT Ⅲ 300V /CAT Ⅱ 600V, IEC 61326-1
Power source R6(AA)(1.5V) × 2
• Skeleton type robust and clear case with
Dimensions 140(L) × 94(W) × 39(D)mm
carrying handle furnished as standard
accessory. Weight 280g approx.
Accessories 7066A(Test leads), 8923(Fuse[500mA/600V]) × 2,
R6(AA) × 2, 9103(Carrying case), Instruction manual
www.kew-ltd.co.jp 11
DIGITAL MULTIMETERS
KEW 1019R DC V
1019R
600.0mV/6.000/60.00/600.0V(Input impedance :10MΩ)
DIGITAL MULTIMETERS
±0.8%rdg±5dgt(600.0mV/6.000/60.00V) ±1.0%rdg±5dgt(600.0V)
DC
AC V Ω REL AUTO POWER
SAVE AC V 6.000/60.00/600.0V(Input impedance:10MΩ)
±1.3%rdg±5dgt(6.000/60.00V)(50/60Hz) ±1.7%rdg±5dgt(6.000/60.00V)(45 - 500Hz)
±1.6%rdg±5dgt(600.0V)(50/60Hz) ±2.0%rdg±5dgt(600.0V)(45 - 500Hz)
Ω 600.0Ω/6.000/60.00/600.0kΩ/6.000/40.00MΩ
±1.0%rdg±5dgt(600.0Ω/6.000/60.00/600.0kΩ/6.000MΩ)
±2.5%rdg±5dgt(40.00MΩ)
Continuity buzzer 600Ω(Buzzer sounds below 60Ω)
Capacitance test 6.000/60.00/600.0nF/6.000/60.00/600.0μF
±3.5%rdg±50dgt(6.000nF) ±3.5%rdg±10dgt(60.00nF)
±3.5%rdg±5dgt(600.0nF/6.000/60.00μF) ±4.5%rdg±5dgt(600.0μF)
Applicable Standards IEC 61010-1 CAT Ⅲ 300V,CAT Ⅱ 600V
IEC 61010-2-033, IEC 61010-031, IEC 61326-2-2
Power source CR2032(3V) × 1 (Auto power off : approx. 15 minutes)
Dimensions 126(L) × 85(W) × 18(D)mm (including hard case)
Weight 135g approx. (including battery and hard case)
Accessories 9188(Hard case), CR2032(3V) × 1, Instruction manual
KEW 1018/1018H DC V
1018/1018H
400mV/4/40/400/600V(Input impedance 10MΩ)
±0.8%rdg±5dgt(400mV/4/40/400V) ±1.0%rdg±5dgt(600V)
DC
AC V Ω Hz DUTY DATA
HOLD REL AUTO POWER
OFF AC V 4/40/400/600V(Input impedance 10MΩ)
±1.3%rdg±5dgt(4/40V) ±1.6%rdg±5dgt(400/600V)
Ω 400Ω/4/40/400kΩ/4/40MΩ
±1.0%rdg±5dgt(400Ω/4/40/400kΩ/4MΩ) ±2.5%rdg±5dgt(40MΩ)
Continuity buzzer 400Ω(Buzzer sounds below 120Ω)
Diode test 4V release voltage : Approx. 0.4mA test current
Capacitance test 4nF/40nF/400nF/4µF/40µF/200µF
Frequency 10/100Hz/1/10kHz (Input sensitivity Voltage:more than 1.5V)
Duty 0.1 - 99.9% ±2.5%rdg±5dgt(Pulse width/Pulse cycle)
Applicable Standards IEC 61010-1 CAT Ⅲ 300V, IEC 61010-031, IEC 61326-1
Power source LR44(1.5V) × 2 (Auto power off : approx. 15 minutes)
Dimensions 107(L) × 54(W) × 10(D)mm
Weight 70g approx.
Accessories 9115(Carrying case[Soft]), 9114(Carrying case[Hard]), LR44 × 2, Instruction manual
1018 1018H
▲
12
DIGITAL MULTIMETERS
KEWMATE 2012R DC V 600.0mV/6.000/60.00/600.0V
2012R
DIGITAL MULTIMETERS
(Input impedance: approx. 10MΩ) ±1.0%rdg±3dgt
AC V 6.000/60.00/600.0V (Input impedance: approx.10MΩ)
±1.5%rdg±5dgt (45 - 400Hz)
DC A 60.00/120.0A ±2.0%rdg±8dgt (60A)
±2.0%rdg±5dgt (120A)
AC A 60.00/120.0A ±2.0%rdg±5dgt (45 - 65Hz)
Ω 600.0Ω/6.000/60.00/600.0kΩ/6.000/60.00MΩ
±1.0%rdg±5dgt (600Ω/6/60/600kΩ)
±2.0%rdg±5dgt (6MΩ) ±3.0%rdg±5dgt (60MΩ)
Continuity buzzer Buzzer sounds below 35±25Ω
Diode test 2V ±3.0%rdg±5dgt Open-loop voltage: approx. 2.7V
Capacitance 400.0nF/4.000/40.00µF ±2.5%rdg±10dgt
Frequency AC A: 100/400Hz
±0.2%rdg±2dgt (100Hz) ±0.1%rdg±1dgt (100 - 400Hz)
AC V: 100/1000Hz/10/100/300.0kHz
±0.2%rdg±2dgt (100Hz) ±0.1%rdg±1dgt (1000Hz/10/100/300.0kHz)
(Input sensitivity Current: more than 6A Voltage: more than 6V [ - 10kHz]/more than
20V [10k - 300kHz])
Conductor size φ12mm max.
Applicable Standards IEC 61010-1 CAT Ⅲ 300V, CAT Ⅱ 600V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326
Power source R03 (1.5V) × 2
*Continuous measuring time:DCV: approx. 150hours, ACA: approx. 25hours(Auto
Ø12 MAX
120A
DC
AC V DC
AC A Ω Hz DATA
HOLD
AUTO POWER
SAVE
Dimensions
power save: approx. 15 minutes)
128 (L) × 92 (W) × 27 (D) mm
• Innovative Multimeters with current measurements up to 120A AC/DC Weight 220g approx. (including batteries)
• Unique Open Jaw technology for AC/DC current measurements Accessories R03 (1.5V) × 2, Instruction manual
• Very compact and as reliable as a traditional full size multimeter Optional 9107 (Carrying case [Soft])
±1.5%rdg±4dgt
KEWMATE AC V 3.4/34/340/600V (Input impedance : 10MΩ)
±1.5%rdg±5dgt[50 - 400Hz]
DC A 60A ±2%rdg±5dgt 100A ±2%rdg±5dgt
AC A 60A ±2%rdg±5dgt(50/60Hz) 100A ±2%rdg±5dgt(50/60Hz)
Ω 340Ω/3.4/34/340kΩ/3.4/34MΩ
±1%rdg±3dgt(0 - 340kΩ)
±5%rdg±5dgt(3.4MΩ)
±15%rdg±5dgt (34MΩ)
Continuity buzzer Buzzer sounds below 30±10Ω
(Continuity buzzer works on 340Ω range only)
Frequency (AC A)3.4/10kHz ±0.1%rdg±1dgt
(AC V)3.4/34/300kHz ±0.1%rdg±1dgt
(Input sensitivity (Input sensitivity
Current:more than 15A Current:more than 25A
Voltage:more than 30V) Voltage:more than 30V)
Conductor size φ6mm max. φ10mm max.
Applicable Standards IEC 61010-1 CAT Ⅲ 300V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326-1
Power source R03(DC1.5V) × 2
*Continuous measuring time : approx. 45 hours (Auto power save : approx. 10 minutes)
Dimensions 128(L) × 87(W) × 24(D)mm 128(L) × 92(W) × 27(D)mm
Weight 210g approx. 220g approx.
photo : 2001 Accessories R03(1.5V) × 2
Instruction manual
Optional 9107(Carrying case[Soft])
DC
AC V DC
AC A Ω Hz DATA
HOLD
AUTO POWER
SAVE
• Capable of measuring AC and DC currents up to 60A(MODEL 2000) /100A (MODEL 2001) with OPEN CLAMP SENSOR.
• 3400 counts with bargraph display.
• Pocket size and heavy duty design.
• Sleep function to save battery consumption.
• Designed to international safety standard IEC 61010-1 CAT Ⅲ 300V
www.kew-ltd.co.jp 13
DIGITAL MULTIMETERS
KEW 1051/1052
KEW 1061/1062
DIGITAL MULTIMETERS
1061,1062 1062
CAT Ⅳ
600V
DC
AC V DC
AC A DC+AC Ω LP-Ω
1061,1062 1061,1062 1062 Except for 1051
Hz DUTY °C dB DATA
HOLD
PEAK
HOLD
MAX/MIN
AVG REL Filter
Except for 1051
AUTO POWER
USB OFF
14
DIGITAL MULTIMETERS
Reliable support for data management Data analysis with Excel Printer output
L0000 N ,+12.539 VDC Printed items (from the left)
※ except for 1051 L0001 N ,+12.532 VDC ・L: Logging memory
DIGITAL MULTIMETERS
Large internal memory to store test data L0002
L0003
N ,+12.532
N ,+12.529
VDC
VDC
・4 digit numbers: Data number
・N: Normal measurement
L0004 N ,+12.532 VDC
• KEW1062: 10,000 data in Logging mode, 100 data manually saved. L0005 N ,+12.538 VDC
(O: at "OL" display)
(B: at "Battery warning" display)
• KEW1061: 1,000 data in Logging mode, 100 data manually saved. L0006 N ,+12.541 VDC ・5 digit numbers: Measurement
L0007 N ,+12.546 VDC ・VDC: Unit (VDC is DC Voltage)
• KEW1052: 1,600 data in Logging mode, 100 data manually saved. L0008 N ,+12.552 VDC
• Logging interval can set from 1 sec. to 30 min. L0009 N ,+12.557 VDC
L0010 N ,+12.555 VDC
L0011 N ,+12.554 VDC
Test data can be transferred to a PC or directly to a Printer* L0012 N ,+12.553 VDC
L0013 N ,+12.553 VDC
• Real-time data can be transferred and shown on a PC. DMM Application software
• Real-time transferring permits the saving of a considerable amount of data on a PC.
• Stored data of internal memory can be monitored by PC.
• Stored data of internal memory can be monitored by PC. OS: Windows® Vista/7/8/10
Display: XGA (Resolution 1024 × 768 dots) or more
• List of measured data can be converted into Graph. Hard-disk: Space required 10Mbyte or more
• Data can be transferred to Excel** and saved as CSV file. Others: With CD-ROM drive and USB port
Optinal Accessories
Description MODEL Contents
Alligator Clip 7234 CAT Ⅳ 600V, CAT Ⅲ 1000V 1set
USB Communication set 8241 USB adaptor+USB cable+DMM Software
Thermal paper for printer 8247 10 rolls
8405 -40ºC - 500ºC (Surface type, Point material: Ceramic)
8406 -40ºC - 500ºC (Surface type)
Thermocouple Type K
8407 -40ºC - 700ºC (Liquid, Semi-solid)
8408 -40ºC - 600ºC (Air, Gas) Alligator clip (7234) USB Communication set (8241)
8115 Surface type
8121 AC 100A
8122 AC 500A
Clamp sensor 8123 AC 1000A
8146 AC 30A
8147 AC 70A
8148 AC 100A
Banana φ 4mm Adjuster Plug 7146 length :190mm
Carrying case 9154 Soft case(for the main unit with test leads and communication cable) Carrying case (9154) Banana f4mm adjuster plug (7146)
Appearance
www.kew-ltd.co.jp 15
CLAMP METERS
CLAMP METERS
CLAMP METERS
16
CLAMP METERS
Selection Guide of Clamp Meters
Fork Current
AC Clamp Meters Tester
2608A 2031 2007R 2117R 2127R 2200 2200R 2002PA 2002R 2204R 2210R 2300R
CLAMP METERS
Appearance
Conductor
size Ф f33mm f24mm f33mm f33mm f33mm f33mm f33mm f55mm f55mm f70mm f150mm f10mm
Display Analogue Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital
Detection − −
method
− −
Frequency 45 - 65Hz(ACA) 40 - 1kHz(ACA) DC
50/60Hz 40 - 1kHz 40 - 400Hz 40 - 1kHz 40 - 1kHz 40 - 1kHz 40 - 1kHz 45 - 500Hz 45 - 500Hz
response 45 - 500Hz(ACV) 45 - 500Hz(ACV) 50/60Hz
Measurement
Max 300A 200A 1000A 1000A 1000A 1000A 1000A 2000A 2000A 400A 3000A 100A
AC A Resolution 0.2A 0.01A 0.1A 0.01A 0.01A 0.01A 0.01A 0.1A 0.1A 0.001A 0.01A 0.1A
Accuracy ±3% of FS ±2%R±5D ±1.5%R±4D ±1.5%R±4D ±1.5%R±4D ±1.4%R±6D ±1.5%R±5D ±1%R±3D ±1.5%R±3D ±3%R±5D ±3%R±5D ±2%R±5D
Max − − − − − − − − − − − 100A
DC A Resolution − − − − − − − − − − − 0.1A
Accuracy − − − − − − − − − − − ±2%R±5D
Diode test − − − − − − − − − − −
Capacitance − − − − − − − − − − −
Temperature °C − − − − − − − − − − −
Function
Non contact
voltage NCV − − − − − − − − −
Back light − − − − − − − − −
DATA
Data hold HOLD
PEAK
Peak hold HOLD − − − − − − − − −
Max/Min MAX/MIN − − − − − − − − − −
Relative REL − − − − − − − − − − − −
Output OUT − − − − − − − − − −
PUT
Other
Operating
0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 50°C 0 - 50°C 0 - 40°C
temperature
CAT Ⅳ 300V(ACA)
CAT Ⅲ 600V(ACA)
Measurement CAT Ⅲ 300V CAT Ⅳ 300V CAT Ⅳ 300V CAT Ⅳ 300V CAT Ⅲ 600V(ACA) CAT Ⅲ 600V CAT Ⅲ 600V CAT Ⅳ 600V CAT Ⅳ 600V
CAT Ⅲ 300V CAT Ⅲ 300V(AC/DCV) CAT Ⅲ 300V
categories CAT Ⅱ 600V CAT Ⅲ 600V CAT Ⅲ 600V CAT Ⅲ 600V CAT Ⅲ 300V(AC/DCV) CAT Ⅱ 1000V CAT Ⅱ 1000V CAT Ⅲ 1000V CAT Ⅲ 1000V
CAT Ⅱ 600V(AC/DCV)
CAT Ⅱ 600V(AC/DCV)
Power source R6 × 1 LR-44 × 2 R03/LR03 × 2 R03/LR03 × 2 R03/LR03 × 2 R03/LR03 × 2 R03/LR03 × 2 R6 × 2 R6 × 2 R03/LR03 × 2 R03/LR03 × 2 R03 × 2
Dimensions 120×70×26 120×70×26
193×78×39 147×58.5×26 204×81×36 204×81×36 204×81×36 190×68×20 190×68×20 247×105×49 247×105×49 161×40×30
(L)x(W)x(D)mm (Display unit) (Display unit)
Weight(Approx.) 275g 100g 220g 220g 230g 120g 120g 470g 470g 200g 300g 110g
Test leads 7066A − 7066A 7066A 7066A 7107A 7107A 7107A 7107A − − −
Accessories Fuse 8923 × 2 − − − − − − − − − − −
Case 9097 9090 9079 9079 9079 9160 9160 9094 9094 9174 9174 9113
www.kew-ltd.co.jp 17
CLAMP METERS
Selection Guide of Clamp Meters
DC Milliamp Clamp Meter/ AC/DC Clamp Meters Leakage Clamp Meters
Clamp Logger
2500 2510 2055 2003A 2009R 2431 2434 2432 2433 2413F
2010 2033 2046R 2056R 2433R 2413R
CLAMP METERS
Appearance
Conductor
size Ф f6 mm f6 mm f7.5mm f24mm f33mm f40mm f55mm f55mm f24mm f28mm f40mm f40mm f68mm
Display Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital
Detection
method − − − −
(2056R)
− − − − (2433R) (2413R)
Frequency DC DC DC DC DC DC
DC DC 40 - 400Hz 40 - 400Hz 20 - 1kHz 20 - 1kHz 40 - 1kHz
response 40 - 2kHz 20 - 1kHz 40 - 400Hz 40 - 400Hz 40 - 1kHz 20 - 1kHz
Measurement
Max − − 20A 300A 600A 1000A 2000A 2000A 200A 100A 100A 400A 1000A
AC A Resolution − − 0.1mA 0.01A 0.1A 0.1A 0.1A 0.1A 0.01mA 0.1mA 0.001mA 0.01mA 0.1mA
±1%R±2D(2413R)
Accuracy − − ±1%R±2D ±1%R±4D ±2%R±5D ±2%R±5D ±1.5%R±2D ±1.3%R±3D ±2%R±4D ±2%R±4D ±1%R±5D ±1%R±5D
±1.8%R±5D(2413F)
Max 120mA 120mA 20A 300A 600A 1000A 2000A 2000A
Function
Non contact
voltage NCV − − − − − − − − − − −
Back light − − − − − − − −
(2413R)
DATA
Data hold HOLD −
PEAK 2
Peak hold HOLD − − − − * − −
(2056R) (Max)
Max/Min MAX/MIN − − − − − − − − − − −
Relative REL − − − − − − − − − − −
Output OUT − − − − − − −
PUT
Filter Filter − − − − − − − −
Other
Operating
-10 - 50°C -10 - 50°C 0 - 50°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C
temperature
CAT Ⅳ CAT Ⅳ
Measurement CAT Ⅲ CAT Ⅳ CAT Ⅳ 600V 600V CAT Ⅲ CAT Ⅲ CAT Ⅲ CAT Ⅲ CAT Ⅲ
− − −
Categories 300V 600V 600V CAT Ⅲ CAT Ⅲ 300V 300V 300V 300V 300V
1000V 1000V
Power source R6/LR6 × 4 R6/LR6 × 4*1 6LR61 × 1 LR-44 × 2 R03 × 2 R03 × 2 R6 × 2 R6 × 2 LR-44 × 2 R03 × 2 R03 × 2 R03 × 2 6F22 × 1
111×61×40 111×61×46 142×64×26
Dimensions (Display unit) (Display unit) (Display unit)
147×59×25 243×77×36 254×82×36 250×105×49 250×105×49 149×60×26 169×75×40 185×81×32 185×81×32 250×130×50
(L)x(W)x(D)mm 104×34×20 104×33×20 153×23×18
(Sensor) (Sensor) (Sensor)
Weight(Approx.) 290g 310g 220g 100g 300g 310g 530g 540g 120g 220g 290g 270g 570g
Test leads − − − − 7066A 7066A 7107A 7107A − − − − −
Accessories
Case 9096 9096 9071 9090 9094 9094 9094 9094 9090 9097 9097 9097 9094
*1 External power is available.
*2 In the PEAK mode, the auto-ranging feature is disabled and measuring ranges are fixed as follows.
DC/ ACA :0 - 400.0A
DC/ ACV :0 - 400.0V
18
ANALOGUE/DIGITAL CLAMP METERS
MODEL 2608A AC A 6/15/60/150/300A ±3% of FS
2608A
AC V 150/300/600V ±3% of FS
Ø33 MAX
300A °C AC A DC
AC V Ω DC V 60V ±3% of FS
DATA
HOLD Ω 1/10kΩ(25/250Ω mid-scale)
±2% of scale length
• DC voltage range is also available
Temperature Note: The MODEL2608A includes a temperature measurement
especially for checking emergency
scale, but it is not available for new customers due to the discon-
battery operated power supply.
MODEL 2002PA/2002R AC A
2002PA
400A(0 - 400A) 400A(0 - 400A)
2002R
2002R
±1%rdg±3dgt[50/60Hz] ±1.5%rdg±3dgt[45 - 65Hz]
±2%rdg±3dgt[40Hz - 1kHz] ±2.5%rdg±3dgt[40Hz - 1kHz]
Ø55 MAX
2000A AC A DC
AC V Ω 2000A(0 - 1500A) 2000A(0 - 1500A)
10ms
DATA PEAK OUT AUTO POWER ±1%rdg±3dgt[50/60Hz] ±2%rdg±5dgt[45 - 65Hz]
HOLD HOLD PUT SAVE
±3%rdg±3dgt[40Hz - 1kHz] ±3%rdg±5dgt[40Hz - 1kHz]
• Can measure large AC current 2000A(1500 - 2000A) 2000A(1501 - 2000A)
up to 2000A. ±3.0%rdg[50/60Hz] ±4%rdg[50/60Hz]
• Peak hold function. AC V 40/400/750V 40/400/750V
±1%rdg±2dgt[50/60Hz] ±1%rdg±2dgt[45 - 65Hz]
• 55mm-dia large tear drop shaped ±1.5%rdg±3dgt[40Hz - 1kHz] ±1.5%rdg±3dgt[40Hz - 1kHz]
jaws. DC V 40/400/1000V ±1%rdg±2dgt
• Minimum resolution 0.1A Continuity buzzer buzzer sounds below 50±35Ω
Ω 400Ω/4k/40k/400kΩ ±1.5%rdg±2dgt
Conductor size φ55mm max.
Frequency response 40Hz - 1kHz
Output Recorder:DC400mV against AC400A DC200mV against AC2000A
Applicable Standards IEC 61010-1 CAT Ⅲ 600V, CAT Ⅱ 1000V
IEC 61010-031 IEC 61010-2-032 IEC 61326-1
Power source R6(AA)(1.5V) × 2 *Continuous measuring time : approx. 150 hours (2002PA)
*Continuous measuring time : approx. 80 hours (2002R)
(Auto power save : approx. 10 minutes)
Dimensions 247(L) × 105(W) × 49(D)mm
Weight 470g approx.
photo : 2002R Accessories 7107A(Test leads), 8201(Output plug), 9094(Carrying case)
R6(AA) × 2, Instruction manual
Optional 7256(Output cord)
www.kew-ltd.co.jp 19
DIGITAL CLAMP METERS AC
MODEL 2031 AC A 20A
2031
±2%rdg±5dgt[50Hz - 1kHz]
Ø24 MAX
200A AC A DATA
HOLD
AUTO POWER
OFF 200A
±2%rdg±5dgt[50/60Hz]
• Can measure large AC current up to
±3%rdg±10dgt[40Hz - 1kHz]
200A.
Conductor size φ24mm max.
• 24mm-dia tear drop shaped jaws.
Frequency response 40Hz - 1kHz
DIGITAL CLAMP METERS AC
20
DIGITAL CLAMP METERS AC
KEW 2200/2200R Detection method Averaging value
2200
True RMS value
2200R
Range 4.000/40.00/400.0A
CAT Ⅳ
600V Ø70 MAX
400A AC A Accuracy ±3%rdg±5dgt[45-500Hz]
DATA MAX/MIN AUTOOFF
POWER (At the center of the circle formed by the flexible sensor)
HOLD
Crest factor Full scale CF<1.6, half scale<3.2
• Flexible and light weight clamp sensor Effective input crest values are √2 times of the max values of each range.
• True RMS Conductor size φ70mm max.
Influence of Additional ±2%(max.) depending on the distance from the center
• MIN / MAX function
Conductor position position
• Backlight LCD display Overload protection 500A AC for 10 seconds
• IEC 61010-1 (CAT Ⅳ 600V / CAT Ⅲ 1000V) Applicable Standards IEC 61010-1, IEC 61010-2-032
• Minimum resolution 0.001A CAT Ⅳ 600V / CAT Ⅲ 1000V Pollution degree 2
IEC 61326-1(EMC) , IEC 60529 IP40
Operating temperature 0 - +50°C, less than 80% RH (without condensation)
& humidity
Storage temperature -10 - +60°C, less than 70% RH (without condensation)
& humidity
Power source R03 / LR03(AAA)(1.5V) × 2
*Continuous measuring time : approx. 120 hours (Auto power off : approx.15 minutes)
Dimensions 120(L) × 70(W) × 26(D) mm : Display unit
1.8m : Sensor cable
Weight 200g Approx. (including batteries)
Accessories 9174 (Carrying case), LR03(AAA) × 2, Instruction manual
Range 30.00/300.0/3000A
CAT Ⅳ
600V Ø150 MAX
3000A AC A Accuracy ±3%rdg±5dgt [45 - 500Hz]
DATA MAX/MIN AUTOOFF
POWER (At the center of the circle formed by the flexible sensor)
HOLD
Crest factor Full scale CF<1.6, half scale<3.2
• Flexible and light weight clamp sensor Effective input crest values are √2 times of the max values of each range.
• Wide reading range up to 3000A Conductor size φ150mm max.
• True RMS Influence of Additional ±3% (max.) depending on the distance from the center
Conductor position position
• MIN / MAX function
Overload protection 5000A AC for 10 seconds
• Backlight LCD display Applicable Standards IEC 61010-1, IEC 61010-2-030
• IEC 61010-1 (CAT Ⅳ 600V / CAT Ⅲ 1000V) CAT Ⅳ 600V / CAT Ⅲ 1000V Pollution degree 2
IEC 61010-2-032, IEC 61326-1 (EMC), IEC 60529 IP40
• Minimum resolution 0.01A
Operating temperature 0 - +50ºC, less than 80% RH (without condensation)
& humidity
Storage temperature -10 - +60ºC, less than 70% RH (without condensation)
& humidity
Power source R03 / LR03 (AAA) (1.5V) × 2
*Continuous measuring time: approx. 120hours (Auto power off: approx. 15 minutes)
Dimensions 120 (L) × 70 (W) × 26 (D) mm : Display unit
1.8m : Sensor cable
Weight Approx. 300g (including batteries)
Accessories 9174 (Carrying case), LR03 (AAA) × 2, Instruction manual
www.kew-ltd.co.jp 21
DIGITAL CLAMP METERS AC/DC
KEW 2003A AC A 400A/2000A(0 - 1000A)
2003A
±1%rdg±2dgt[50/60Hz](200mA)
Ø7.5 MAX
20A
DC
AC A OUT
PUT
External
Power Supply ±1.5%rdg±8dgt[40Hz - 2kHz](200mA)
±1%rdg±2dgt[50/60Hz](2A)
• High sensitivity, miniature AC/DC clamp
±2.5%rdg±10dgt[40Hz - 2kHz](2/20A)
meter.
DC A 2/20A
• 0.1mA minimum resolution for AC cur- ±1%rdg±2dgt(2A) ±1.5%rdg±4dgt(20A)
rent and 1mA minimum resolution for
Conductor size φ7.5mm max.
DC current.
Frequency response DC 40Hz - 2kHz
• Output terminal for recorder connection. Output Recorder: DC200mV against AC200mA/2/20A
DC200mV against DC2/20A
Power source 6LR61(9V Alkaline battery) × 1 or AC adaptor
*Continuous measuring time : approx. 20 hours (DC)/approx. 40 hours (AC)
Dimensions 142(L) × 64(W) × 26(D)mm : Display unit
153(L) × 23(W) × 18(D)mm : Sensor
Weight 220g approx.
Accessories 9071(Carrying Case) 6LR61 × 1 Instruction manual
Optional 7256(Output cord) 8022(AC adaptor)(110V)
8023(AC adaptor)(220V)
22
DIGITAL CLAMP METERS AC/DC
MODEL 2033 AC A 40/300A
2033
±1%rdg±4dgt[50/60Hz](0 - 40A)
Ø24 MAX
300A
DC
AC A DATA
HOLD
AUTO POWER
SAVE ±2.5%rdg±4dgt[20Hz - 1kHz](0 - 40A)
• Smallest clamp meter capable of AC ±1.5%rdg±4dgt[50/60Hz](20 - 200A)
and DC current measurements. ±2.5%rdg±4dgt[20Hz - 1kHz](20 - 200A)
±3.5%rdg[50/60Hz](200 - 300A)
• 300A auto ranging has minimum reso- ±4%rdg[20Hz - 1kHz](200 - 300A)
lution of 0.01A AC/DC.
DC A 40/300A ±1%rdg±4dgt(0 - ±40A)
KEW 2046R AC A
2046R
0 - 600.0A ±2.0%rdg±5dgt(50/60Hz) ±3.5%rdg±5dgt(40 - 500Hz)
DC A 0 - 600.0A ±1.5%rdg±5dgt
CAT Ⅳ
600V Ø33 MAX
600A
DC
AC V DC
AC A AC V 6/60/600V(Auto Ranging)
Ω Hz DUTY ±1.5%rdg±4dgt(50/60Hz) ±3.5%rdg±5dgt(40 - 400Hz)
10ms DC V 600m/6/60/600V(Auto Ranging) ±1.0%rdg±3dgt
°C NCV DATA
HOLD
PEAK
HOLD MAX/MIN
Ω 600/6k/60k/600k/6M/60MΩ(Auto Ranging)
AUTO POWER ±1%rdg±5dgt(600 - 6M) / ±5%rdg±8dgt(60M)
REL OFF
Continuity buzzer Buzzer Sounds at 100Ω
• Very useful for power distribution com- Hz 10/100/1k/10kHz(Auto Ranging)
panies, power utilities and maintenance (Input sensitivity Current:more than 50A[40 - 400Hz]
fields. Voltage:more than 1V(6V Range), 4.2V(60V Range), 42V(600V Range)[ - 10kHz])
DUTY 0.1 - 99.9% ±2.5%rdg ±5dgt (Pulse width/Pulse cycle)
• Red LED, as “Non Contact Voltage” func-
tion, gives warning to the user on the Capacitance test 400n/4µ/40µF(Auto Ranging)
presence of AC voltage. Temperature -50°C - +300°C(with the use of Temperature probe 8216)
Conductor size φ33
• Double molding gives comfortable feel-
ing in palm. Applicable Standards IEC 61010-1 CAT Ⅳ 600V
IEC 61010-2-032, IEC 61326
• 6039 counts with Bar Graph display.
Power source R03 (1.5V)(AAA) × 2
• Minimum resolution 0.1A *Continuous measuring time : approx. 10 hours (Auto power off : approx. 15 minutes)
Dimensions 243(L) × 77(W) × 36(D) mm
Weight 300g approx.
Accessories 7066A(Test leads) 9094(Carrying case) R03 × 2 Instruction manual
Optional 8216(Temperature probe)
2056R
±1.5%rdg±5dgt(50/60Hz) ±2.0%rdg±5dgt(50/60Hz)
±3.0%rdg±5dgt(40 - 400Hz) ±3.5%rdg±5dgt(40 - 500Hz)
CAT Ⅳ
600V Ø40 MAX
1000A
DC
AC V DC
AC A DC A 0 - 600.0/1000A ±1.5%rdg±5dgt
2056R
www.kew-ltd.co.jp 23
DC MILLIAMP CLAMP METER/CLAMP LOGGER
KEW 2500/2510 NEW
DC A
2500
20/100mA(Auto ranging)
2510
➡
5 sec 11 days
10 sec 22 days Optional Accessory
30 sec 66 days KEW windows
External supply Bluetooth 60 sec 133 days MODEL 7256 for 2510
Output cord
・OS : Windows®Vista/7/8/10 * Windows® is registered trademark of for DC Milliamp Clamp Logger
KEW 2510
・Display : XGA(Resolution 1024 × 768 dots) or more Microsoft in the United States.
Copyright
KYORITSU ELECTRICAL
INSTRUMENTS WORKS, LTD.
2015
Diameter of measurable Applicable to signal measurement Spotlight LED & Backlight Display
conductor : φ6mm max on process and building instrumentation
φ6mm
▲
24
LEAKAGE CLAMP METERS
MODEL 2431 AC A 20/200mA/200A
2431
(50/60Hz) ±3%rdg±5dgt(20/200mA/100A)
Ø24 MAX
200A
Resolution
0.01mA AC A DATA
HOLD Filter ±5%rdg±5dgt(200A)
AUTO POWER AC A 20/200mA/200A
OFF
(WIDE) ±2%rdg±4dgt[50/60Hz](20/200mA/0 - 100A)
• Frequency Selector Switch to elimi- ±5%rdg±6dgt[40 - 400Hz](20/200mA/0 - 100A)
nate the effect of harmonics. ±5%rdg±4dgt[50/60Hz](100.1 - 200A)
(50/60Hz) ±1%rdg±5dgt(4/40mA)
High Sensitive Model
10ms ±1%rdg±5dgt(0 - 80A)
Ø40 MAX
100A
Resolution
0.001mA AC A DATA
HOLD
PEAK
HOLD
±5%rdg(80.1 - 100A)
AC A 4/40mA/100A
AUTO POWER
Filter OFF (WIDE) ±1%rdg±5dgt[50/60Hz] ±2.5%rdg±10dgt[20Hz - 1kHz](4/40mA)
±1%rdg±5dgt[50/60Hz] ±2.5%rdg±10dgt[40Hz - 1kHz](0 - 80A)
• Frequency Selector Switch to elimi-
±5%rdg[50/60Hz] ±10%rdg[40Hz - 1kHz](80.1 - 100A)
nate the effect of harmonics.
Maximum 600V AC/DC (between line/neutral)
• Three ranges: 4mA/40mA/100A. circuit voltage 300V AC/DC (against earth)
• Minimum resolution 0.001mA Conductor size φ40mm max.
Frequency response 20Hz - 1kHz(40Hz - 1kHz:100A)
Effect of external 2mA AC approx. in proximity to a 15mm-dia
stray magnetic field conductor carrying 100A AC
Applicable Standards IEC 61010-1 CAT Ⅲ 300V Pollution degree 2
IEC 61010-2-032
Power source R03(DC1.5V) × 2
*Continuous measuring time : approx. 40 hours (Auto power off : approx. 10 minutes)
Dimensions 185(L) × 81(W) × 32(D)mm
Weight 290g approx.
Accessories 9097(Carrying case) R03(1.5V) × 2 Instruction manual
2433R
(50/60Hz) ±1%rdg±5dgt(40/400mA)
±1%rdg±5dgt(0 - 350A:2433, 0 - 300A:2433R)
Ø40 MAX
400A
Resolution
0.01mA AC A DATA
HOLD
±2%rdg(350.1 - 399.9A:2433, 300.1 - 399.9A:2433R)
10ms
PEAK
Filter AUTO POWER AC A 40/400mA/400A
HOLD OFF
(WIDE) ±1%rdg±5dgt[50/60Hz] ±2.5%rdg±10dgt[20Hz - 1kHz](40/400mA)
• Frequency Selector Switch to elimi- ±1%rdg±5dgt[50/60Hz] ±2.5%rdg±10dgt[40Hz - 1kHz]
nate the effect of harmonics. (0 - 350A:2433, 0 - 300A:2433R)
• Three ranges: 40mA/400mA/400A. ±2%rdg[50/60Hz] ±5%rdg[40Hz - 1kHz]
(350.1 - 399.9A:2433, 300.1 - 399.9A:2433R)
• Minimum resolution 0.01mA Maximum circuit voltage 600V AC/DC (between line/neutral) 300V AC/DC (against earth)
Conductor size φ40mm max.
Frequency response 20Hz - 1kHz(40Hz - 1kHz:400A)
Effect of external 10mA AC approx. in proximity to a 15mm-dia
stray magnetic field conductor carrying 100A AC
Applicable Standards IEC 61010-1 CAT Ⅲ 300V Pollution degree 2 IEC 61010-2-032
Power source R03 (DC1.5V) × 2
*Continuous measuring time : approx. 40 hours (2433)
*Continuous measuring time : approx. 24 hours (2433R) (Auto power off : approx 10 minutes)
Dimensions 185(L) × 81(W) × 32(D)mm
Weight 270g approx.
photo : 2433R Accessories 9097 (Carrying case) R03(1.5V) × 2 Instruction manual
www.kew-ltd.co.jp 25
LEAKAGE CLAMP METERS/FORK CURRENT TESTER
KEW 2413F/2413R AC A
2413F
200mA/2/20/200A/1000A
2413R
200mA/2/20/200/1000A
2413R 10/100ms
(50/60Hz) ±1.5%rdg±2dgt(200mA/2/20A) ±2.5%rdg±5dgt(200mA/2/20A)
±2%rdg±2dgt(200A/0 - 500A) ±3.0%rdg±5dgt(200A/0 - 500A)
Ø68 MAX
1000A AC A DATA
HOLD
PEAK
HOLD
±5.5%rdg(501 - 1000A) ±5.5%rdg(501 - 1000A)
2413R
Resolution OUT
Filter AC A 200mA/2/20/200A/1000A 200mA/2/20/200/1000A
0.1mA PUT
(WIDE) ±1%rdg±2dgt[50/60Hz] ±1.8%rdg±5dgt[50/60Hz]
• Large transformer jaws of 68mm diam- ±3%rdg±2dgt[40Hz - 1kHz](200mA/2/20A) ±3.0%rdg±5dgt[40Hz - 1kHz](200mA/2/20A)
eter makes it possible to clamp on all ±1.5%rdg±2dgt[50/60Hz] ±2.0%rdg±5dgt[50/60Hz]
LEAKAGE CLAMP METERS/FORK CURRENT TESTER
three or four wires (3 phases) together ±3.5%rdg±2dgt[40Hz - 1kHz](200A/0 - 500A) ±3.5%rdg±5dgt[40Hz - 1kHz](200A/0 - 500A)
for leakage current measurement. ±5%rdg[50/60Hz] ±5.0%rdg[50/60Hz](501 - 1000A)
• Frequency filter switch to eliminate ±10%rdg[40Hz - 1kHz](501 - 1000A)
the effect of the harmonics. Conductor size φ68mm max.
Frequency response 40Hz - 1kHz
• 2 way analogue output terminal.
Effect of external stray 10mA AC max.
• Minimum resolution 0.1mA magnetic field φ15mm 100A
Output Waveform:AC200mV against the maximum value of each range (1000A range is 100mV)
Recorder:DC200mV against the maximum value of each range (1000A range is 100mV)
Crest factor — 3.0 or Less
Applicable Standards IEC 61010-1 CAT Ⅲ 300V IEC 61010-2-032
Power source 6F22(9V) × 1 *Continuous measuring time : approx. 60 hours
Dimensions 250(L) × 130(W) × 50(D)mm
Weight 570g approx. 600g approx.
Accessories 9094(Carrying case) 6F22 × 1 Instruction manual
photo : 2413R
Optional 7073(2WAY Output cord)
(50/60Hz) ±2%rdg±4dgt
Ø28 MAX
100A
Resolution
0.1mA AC A DATA
HOLD Filter AC A 400mA/4/100A
AUTO POWER (WIDE) ±2%rdg±4dgt[50/60Hz] ±3%rdg±5dgt[40 - 400Hz]
SAVE
Conductor size φ28mm max.
• Least affected by external stray mag- Frequency response 40 - 400Hz
netic field.
Effect of external stray 20mA AC max.
• 20mA AC max. in proximity to a 15mm- magnetic field φ15mm 100A
dia conductor carrying 100A AC. Applicable Standards IEC 61010-1 CAT Ⅲ 300V IEC 61010-2-032
• Frequency Selector Switch to elimi- Power source R03(AAA) (1.5V) × 2
nate the effect of harmonics. *Continuous measuring time : approx. 150 hours(Auto power save : approx. 10 minutes)
26
CLAMP SENSOR/CLAMP ADAPTOR
KEW 8115 Measuring range AC 0.1 - 130Arms
8115
DC 0 - ±180A
CLAMP SENSOR Output voltage AC 10mV/A DC 10mV/A
AC DC Accuracy ±1.2%rdg±0.4mV (50/60Hz) ±1.2%rdg±0.4mV (*)
Ø12 MAX
130A
MAX
180A
DC
AC A AUTO POWER
OFF
±2.5%rdg±0.4mV (40Hz - 1kHz)
Low battery warning 2.2V±0.2V or less - Red LED flash
(1.9V±0.2V - Automatically power off)
Conductor size φ12mm max.
Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord
has a BNC connector which enables direct observation of current waveform on oscillo-
scope. Specifications are same as those for Model 8112.
www.kew-ltd.co.jp 27
INSULATION TESTERS
INSULATION TESTERS
INSULATION TESTERS
28
INSULATION TESTERS
Selection Guide of Insulation Testers
Analogue Insulation Testers Analogue Insulation/Continuity Testers
Appearance
photo : 3165
INSULATION TESTERS
AC Voltage AC V 600V 600V 600V 600V − 600V
DC Voltage DC V − − − 600V − −
Back light − − −
Power source R6 × 4 R6 × 4 R6 × 4 LR6 × 4 R6 × 6 R6 × 6
Dimensions
90 × 137 × 40 90 × 137 × 40 90 × 137 × 40 97 × 156 × 46 167 × 185 × 89 106 × 160 × 72
(L) × (W) × (D)mm
Weight(Approx.) 330g 330g 340g 430g 860g 560g
Appearance
photo : 3021A
Continuity buzzer
Power source R6 × 8 R6 × 8 R6 × 6 R6 × 6 R6 × 6
Dimensions
167 × 185 × 89 167 × 185 × 89 105 × 158 × 70 105 × 158 × 70 105 × 158 × 70
(L) × (W) × (D)mm
Weight(Approx.) 970g 990g 600g 600g 600g
Analogue High Voltage Insulation Testers Digital High Voltage Insulation Testers
Appearance
photo :
3121B photo : 3125A
Back light − − −
www.kew-ltd.co.jp 29
DIGITAL INSULATION/CONTINUITY TESTERS
MODEL 3005A Insulation resistance
3005A/3007A
AC voltage
AC voltage range 0 - 600V AC
Accuracy ±5%rdg±3dgt
General
Applicable Standards IEC 61010-1 CAT Ⅲ 300V Pollution degree 2
IEC 61557-1/2/4
Accessory
MODEL 7122B
Test leads
Features (3005A/3007A)
• Bar graph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
Selection Guide
• Auto null function to automatically subtract the test lead resistance before displaying 3005A 3007A
the real continuity resistance value. 250V test voltage
• Trac-Lok mode to conserve battery life on insulation and continuity tests (Model 3007A only ). 500V test voltage
1000V test voltage
• Live circuit warning beeper.
200mA continuity range
• Releasing the test button automatically discharges the charges stored in the circuit
Live circuit warning
under test.
Illuminated scale
• Backlight function to view the test results in dimly lit areas (Model 3007A only). Automatic discharge
• 200mA continuity measuring current to IEC 61557. Trac-lok for extended battery life
• Minimum 1mA current on insulation tests to IEC 61557.
30
DIGITAL INSULATION/CONTINUITY TESTERS
KEW 3021A NEW /3022A NEW /3023A NEW
DC
AC V Ω AUTO POWER
OFF
photo : 3021A
MODEL 9089
Carrying case
MODEL 7150A Test leads with remote control switch set MODEL 7115 MODEL 8016
(7103A, 7161A, 7131B, 8017, 9120) Extension probe Hook type prod
www.kew-ltd.co.jp 31
ANALOGUE INSULATION/CONTINUITY TESTERS
MODEL 3131A Insulation resistance
3131A
32
ANALOGUE INSULATION TESTERS
MODEL 3161A Insulation resistance
3161A
www.kew-ltd.co.jp 33
HIGH VOLTAGE INSULATION TESTERS
2500V 5000V
KEW 3121B/3122B
• Easy and simple operation.
• Automatic ranges, indicated by different LED’s.
• Newly-designed alligator clip.
• It comes with a tough hard case.
• Safety standard IEC 61010-1 CAT Ⅳ 300V
HIGH VOLTAGE INSULATION TESTERS
photo : 3121B
photo : 3122B
3121B 3122B
Test voltage 2500V 5000V
Measuring ranges 2GΩ/100GΩ (auto ranging) 5GΩ/200GΩ (auto ranging)
(automatic change)
First effective measuring ranges 0.1 - 50GΩ 0.2 - 100GΩ
Accuracy ±5% rdg
Other ranges accuracy ±10% rdg or 0.5% of scale length
Short circuit current 0.08mA
Applicable Standards IEC 61010-1, 61010-2-030 CAT Ⅳ 300V, CAT Ⅲ 600V Pollution degree 2,
IEC 61326-1, 61326-2-2(EMC), IEC 60529(IP40)
Power source DC12V:LR14 × 8
Dimensions 177(L) × 226(W) × 100(D) mm
Weight 1.6kg approx. 1.7kg approx.
Accessories 7165A(Line probe)(3m), 7264(Earth cord)(3m), 7165A(Line probe)(3m), 7264(Earth cord)(3m),
7265(Guard cord)(3m), 8019(Hook type prod), 7265(Guard cord)(3m), 8019(Hook type prod),
9182(Carrying case[Hard]), LR14 × 8, Instruction manual 9183(Carrying case[Hard]), LR14 × 8, Instruction manual
Optional 7168A(Line probe with alligator clip)(3m), 7253(Longer line probe with alligator clip)(15m), 8324(Adaptor for recorder)
Optional Accessories
MODEL 8324
Adaptor for recorder
MODEL 7253 (Output 10mV/1µA)
MODEL 7168A Longer line probe Cable length : 200mm
Line probe with alligator clip : 3000mm with alligator clip:15m Alligator clip side : 1100mm
34
HIGH VOLTAGE INSULATION TESTERS
2500V 5000V
KEW 3025A/3125A
DC
AC V AUTO POWER
OFF
• Large digital display with Bar Graph indication and back light.
• Polarization Index measurement(PI)
photo : 3025A
3025A/3125A
Range Insulation resistance
Voltage measurement
Test voltage 250V 500V 1000V 2500V 5000V*1
Measuring range 0.0 - 100.0MΩ 0.0 - 99.9MΩ 0.0 - 99.9MΩ 0.0 - 99.9MΩ 0.0 - 99.9MΩ 30 - 600V
80 - 1000MΩ 80 - 999MΩ 80 - 999MΩ 80 - 999MΩ AC/DC
0.80 - 2.00GΩ 0.80 - 9.99GΩ 0.80 - 9.99GΩ (50/60Hz)
8.0 - 100.0GΩ 8.0 - 99.9GΩ
80 - 1000GΩ
Accuracy ±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt ±2%rdg±3dgt
±20%(100GΩ or more)
Short circuit current 1.5mA —
Rated test current 0.7mA - 0.9mA at 0.25MΩ load 0.8mA - 1mA at 0.5MΩ load 1mA - 1.2mA at 1MΩ load 1mA - 1.2mA at 2.5MΩ load 1mA - 1.2mA at 5MΩ load —
Open circuit voltage 250V +10%,-10% 500V +20%,-10% 1000V +20%,-0% 2500V +20%,-0% 5000V +20%,-0% —
Applicable Standard IEC 61010-1, 61010-2-030 CAT Ⅳ 300V, CAT Ⅲ 600V Pollution degree 2, IEC 61326-1, 2-2
Power source DC12V:LR14 × 8
Dimensions 177(L) × 226(W) × 100(D) mm
Weight 1.7kg approx. : 3025A 1.9kg approx. : 3125A
Accessories 7165A(Line probe)(3m), 7264(Earth cord)(3m), 7265(Guard cord)(3m), 8019(Hook type prod), 9180(Carrying case for 3025A)
9181(Carrying case for 3125A), LR14(Alkaline battery size C) × 8, Instruction manual
Optional 7168A(Line probe with alligator clip)(3m), 7253(Longer line probe with alligator clip)(15m), 8302(Adaptor for recorder)
*1) KEW3125A only
Accessories
MODEL 7165A MODEL 7264 MODEL 7265 MODEL 8019 MODEL 9180/9181
Line probe 3,000mm Earth cord 3,000mm Guard cord 3,000mm Hook type prod Carrying case [Hard]
9180(3025A)/9181(3125A)
www.kew-ltd.co.jp 35
HIGH VOLTAGE INSULATION TESTERS
5000V
KEW 3127
CAT Ⅳ
600V
DC
AC V USB AUTO POWER
OFF Bluetooth
• Insulation Resistance up to 10TΩ
• Short-Circuit Current up to 5mA
• Wide Test Voltage from 250V to 5000V
• Diagnostic Insulation Tests: IR, PI, DAR, DD, SV, RAMP.
• Wireless communication by Bluetooth for transferring and showing real-time
data to PC and Android device.
• Memory and Logging functions.
• Filter function reduces noise interference.
HIGH VOLTAGE INSULATION TESTERS
Function
PI DAR DD SV RAMP
3127
Insulation resistance
Test voltage 250V * 1 500V 1000V 2500V 5000V
Max measurement value 9.99GΩ 99.9GΩ 199GΩ 999GΩ 9.99TΩ
0.0 - 99.9MΩ 0.0 - 999MΩ 0.0 - 1.99GΩ 0.0 - 99.9GΩ 0.0 - 99.9GΩ
±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt
Accuracy
0.1G - 9.99GΩ 1G - 99.9GΩ 2G - 199GΩ 100G - 999GΩ 0.1T - 9.99TΩ
±20%rdg ±20%rdg ±20%rdg ±20%rdg ±20%rdg
Short circuit current Max 5.0mA
Accuracy -10 - +10% -10 - +20% 0 - +20%
Output voltage Variable – -20% - 0% (5%step)
Monitor ±10%rdg±20V
Voltage measurement Current measurement Capacitance measurement
AC:30 - 600V (50/60Hz)
Measuring range 0.00nA - 5.50mA 5.0nF - 50.0μF * 2
DC:±30 - ±600V
Accuracy ±2%rdg±3dgt ±10%rdg* 3 ±5%rdg±5dgt
Power source Rechargeable Battery (Lead-acid Battery) 12V*4 Charging power : DC 15VA MAX
Communication Interface Bluetooth:Ver2.1 + EDR Class2 , USB:Ver1.1
Applicable Standards IEC 61010-1, 61010-2-030 CAT IV 600V Pollution degree2, IEC 61326-1, 2-2
Dimension 208(L) × 225(W) × 130(D) mm (Hard case 380(L) × 430(W) × 154(D) mm)
Weight 3127:4kg Approx. (including battery), Total:8kg Approx. (including Accessories)
7165A(Line probe), 7224A(Earth cord), 7225A(Guard cord),
Accessories
8019(Hook type prod), 8327EU(Power adaptor 15V/1A), 9171(Carrying case[Hard]), Instruction manual
7168A(Line probe with alligator clip:3m),
Optional
7253(Longer line probe with alligator clip:15m), 8258(USB communication set), 8302(Adaptor for recorder 1mV/1μA)
*1) IR mode only *2) At 5000V range 5.0nF-25.0μF *3) Determined by resistance and Voltage values (over 10MΩ) *4) No measurements are possible while charging ※ Bluetooth is a registered trademark of the Bluetooth SIG, Inc.
7168A 8258
(3m)
DD Dielectric Discharge
Current value 1 min. after completing (mA)
System requirements DD=
OS: Windows®Vista/7/8/10 Voltage value when a measurement
7253 8302 Display: XGA (Resolution 1024 × 768 dots) or more complete (V) × Capacitance (F)
(15m) Hard-disk: Space required 100Mbyte or more
DD 2.0 or less 2.0-4.0 4.0-7.0 7.0 or more
Others: With CD-ROM drive and USB port
* Windows® is a registered trademark of Microsoft in Criteria Good Warning Poor Very poor
the United States.
36
HIGH VOLTAGE INSULATION TESTERS
12000V
KEW 3128
CAT Ⅳ
600V
DC
AC V USB AUTO POWER External
OFF Power Supply
Function
PI DAR DD SV
3128
Test voltage 500V 1000V 2500V 5000V 10000V 12000V
Max measurement value 500GΩ 1TΩ 2.5TΩ 5TΩ 35TΩ
400kΩ - 50GΩ ±5%rdg±3dgt 800kΩ - 100GΩ ±5%rdg±3dgt 2MΩ - 250GΩ ±5%rdg±3dgt 4MΩ - 500GΩ ±5%rdg±3dgt 8MΩ - 1TΩ ±5%rdg±3dgt
Insulation resistance Accuracy 1T - 10TΩ ±20%rdg
50G - 500GΩ ±20%rdg 100G - 1TΩ ±20%rdg 250G - 2.5TΩ ±20%rdg 500G - 5TΩ ±20%rdg
10T - 35TΩ Values are displayed, but accuracy isn’t guaranteed
Short circuit current Max 5.0mA
Load resistor to output rated voltage 0.5MΩ or more 1MΩ or more 2.5MΩ or more 5MΩ or more 20MΩ or more 24MΩ or more
Rated voltage 500V 1000V 2500V 5000V 10000V 12000V
Monitor accuracy ±10%±20V
Output voltage
Output accuracy 0 - +20% 0 - +10% 0 - +10% 0 - +10% -5 - +5% -5 - +5%
Selectable range 50 - 600V (in steps of 5V) 610 - 1200V (in steps of 10V) 1225 - 3000V (in steps of 25V) 3050 - 6000V (in steps of 50V) 6100 - 10000V (in steps of 100V) 10100 - 12000V (in steps of 100V)
Measuring range DCV : ±30 - ±600V, ACV : 30 - 600V(50/60Hz)
Voltage measurement
Accuracy ±2%rdg±3dgt
Measuring range 5.0nA - 2.40mA(Depending on the insulation resistance)
Current measurement
Accuracy ±5%rdg±5dgt
Capacitance Measuring range 5.0nF - 50.0µF 5.0nF - 1.0µF (Display range : 5.0nF - 50.0μF)
measurement Accuracy ±5%rdg±5dgt
Applicable Standards IEC 61010-1 CAT Ⅳ 600V Pollution degree 2, IEC 61326, IEC 60529(IP64): with the lid closed.
Power source Rechargeable Lead storage battery (12V *Charging time : approx. 8 hours) / AC Power supply (100V - 240V, 50/60Hz)
※Continuous measuring time: approx. 4 hours a load of 100MΩ at the Insulation resistance 12000V Range.
Dimensions 330(L) × 410(W) × 180(D)mm *Instrument and Hard case
General Weight 9kg approx. (including battery) *Instrument and Hard case
7170(Power cord), 7224A(Earth cord), 7225A(Guard cord), 7226A(Line probe), 7227A(Line probe with alligator clip),
Accessories
8029(Extension prod), 8255(CAT Ⅳ Standard prod), 8212-USB-W(USB adaptor with KEW Windows(Software)), Instruction manual
Optional 7254(Longer line probe with alligator clip)(15m)
www.kew-ltd.co.jp 37
HIGH VOLTAGE INSULATION TESTERS
10000V
Accessories
Optional Accessories
MODEL 8324
Adaptor for recorder
(Output 10mV/1µA)
MODEL 7168A MODEL 7253 Cable length:
Line probe Longer line probe 200mm connector side
with alligator clip:3m with alligator clip:15m 1100mm alligator clip side
38
HIGH VOLTAGE INSULATION TESTERS
10000V
Accessories
Battery charger
①
Instrument Layout
① Line Probe ⑬ Output Terminal for Recorder
② Guard Terminal ⑭ Press to Test Button ③ ②
③ Earth Terminal ⑮ Function Switch ⑤
④
④ Battery Alarm ⑯ Output Voltage Set Knob
⑤ Battery Charging Indicator ⑥
⑥ High Scale for 100GΩ Range ⑦
⑩ ⑧
⑦ Low Scale for 100GΩ Range
⑨
⑧ High Scale Indicator for 100GΩ Range
⑨ Low scale Indicator for 100GΩ Range ⑪
⑫ ⑬
⑩ Output Voltage and Set Voltage Indicator
⑪ Meter Movement Zero Adjust ⑭ ⑯
⑫ Terminal for Battery Charging
⑮
www.kew-ltd.co.jp 39
EARTH TESTERS
EARTH TESTERS
EARTH TESTERS
40
EARTH TESTERS
Precise Measurement
EARTH TESTERS
Measurement of the simplified earth [KEW 4300/MODEL 4102A/KEW 4105A/KEW 4105DL]
resistance (2-Pole method)
Measurement of the earth resistance with Earth Clamp [MODEL 4200/KEW 4202]
(Why earth measurements can be found by only clamping it?)
These earth resistances, R1, R2,… Rn can be considered that they are connected in parallel.
And They can be regarded as a combined resistance Rs. The Rs can be regarded small enough
against Rx since a combined resistance consists of several resistances.
Following is an equivalent circuit diagram of this circuit.
Rx 1
Rx Rs= n1
Σ
i=1Ri
Rx R1 R2 Rn Rx Rs
www.kew-ltd.co.jp 41
EARTH TESTERS
KEW 4105DL NEW
Earth resistance
20Ω
4105DL/4105DL-H
200Ω 2000Ω
measurement
WP Measuring range 0.00 - 2000 Ω
Display range 0.00 - 20.99 Ω 0.0 - 209.9 Ω 0 - 2099 Ω
AUTO POWER
OFF Accuracy*1 ±1.5%rdg±0.08 Ω* 2 ±1.5%rdg±4dgt
Auxiliary earth <10 kΩ <50 kΩ <100 kΩ
resistance* 3
Comparator 10 Ω 100 Ω 500 Ω
reference value
Earth voltage measurement
Measuring range 0 - 300 V AC (45 - 65Hz) ±0 - ±300 V DC
Display range 0.0 - 314.9 V 0.0 - ±314.9 V
Accuracy ±1%rdg±4dgt
Overload protection Earth resistance:360V AC(10 Seconds)
Earth Voltage:360V AC(10 Seconds)
Applicable Standards IEC 61010-1, CAT Ⅳ 100 V /CAT Ⅲ 150 V /CAT Ⅱ 300 V
Pollution degree 3
IEC 61010-2-030,IEC 61010-031, IEC 61557-1, -5
IEC 60529 IP67, IEC 61326-1, -2-2
EARTH TESTERS
Optional Accessories
MODEL 8259
MODEL 7272 MODEL 7267 MODEL 7268 MODEL 7271 MODEL 8041 MODEL 9192 Adapter for measurement
Cable reel for Earth Cable reel for Earth Earth resistance Auxiliary earth carrying case
Precision measurement cord set terminal
resistance tester (red) resistance tester (yellow) test leads spikes [2spikes/1set]
(7267, 7268, 7271, 8041, 9192) [red, yellow, green/1 set]
42
EARTH TESTERS
MODEL 4102A Earth resistance
× 1ΩRange
4102A/4102A-H
× 10Ω × 100Ω
measurement
Measuring range 0 - 12 Ω 0 - 120 Ω 0 - 1200 Ω
Accuracy ±3% of full scale
Earth voltage measurement
Measuring range 0 - 30 V AC (50,60Hz)
Accuracy ±3% of full scale
Overload protection Earth resistance : 276V AC/DC (10 seconds)
Earth voltage : 276V AC/DC (10 seconds)
Applicable Standards IEC 61010-1 CAT Ⅲ300 V Pollution degree 2
IEC 61010-2-030, IEC 61557-1, -5, IEC 60529 IP54
Power source R6(AA)(1.5V) × 6
Dimensions 105(L) × 158(W) × 70(H) mm (including case lid)
Weight Approx. 600g (including batteries and case lid)
Accessories 7095A(Earth resistance test leads [red-20m, yellow-10m, green-5m/1set])
7127A(Simplified measurement probe),
8032(Auxiliary earth spikes[2 spikes/1set]), 9121(shoulder strap),
R6(AA) × 6, Instruction manual
Carrying case : 9084[Soft] : 9164[Hard]
EARTH TESTERS
Optional 7100A(Precision measurement Cord set),
8259(Adapter for measurement terminal)
MODEL 7100A
Precision measurement cord set
(7095A, 8032, 8200-03, 9091)
www.kew-ltd.co.jp 43
EARTH TESTERS
KEW 4106 Function Range Resolution
4106
Measuring range Accuracy
2W 0.001W 0.03 - 2.099W ±2%rdg.±0.03W
20W 0.01W 0.03 - 20.99W
Earth resistance
200W 0.1W 0.3 - 209.9W
Re
(Rg at ρ measurement) 2000W 1W 3 - 2099W ±2%rdg.±5dgt
20kW 10W 0.03k - 20.99kW
200kW 100W 0.3k - 209.9kW
Auxiliary earth resistance
8% of Re+Rh+Rs
Rh, Rs
2W 0.2 - 395.6W·m
20W 0.2 - 3956W·m
200W 0.1W·m - 1W·m 20 - 39.56kW·m
Earth resistivity ρ ρ=2×π×a×Rg
2000W Autoranging 0.2 - 395.6kW·m
20kW
2.0 - 1999kW·m
200kW
Series interference
50V 0.1V 0 - 50.9Vrms ±2%±2dgt
voltage Ust (A.C only)
Frequency Fst Autoranging 0.1Hz, 1Hz 40Hz - 500Hz ±1%±2dgt
EARTH TESTERS
ranges ±3%rdg±5dgt
SIMPLIFIED EARTH TESTER
Voltage ranges AC:5.0 - 300.0V(45 - 65Hz) ±1%rdg±4dgt
AUTO
AUTO POWER DC:±5.0 - 300.0V ±1%rdg±8dgt
OFF
Applicable Standards IEC 61010-1 CAT Ⅲ 300V pollution degree 2
IEC 61557-1,-5
IEC 61326-1,2-2,IEC 60529(IP40)
Power source LR6(AA)(1.5V) × 2
Dimensions 232(L) × 51(W) × 42(D)mm
Weight 220g approx(including battery)
Accessories 7248(Test lead with Alligator clip and Flat test probe)
8072(CAT Ⅱ Standard prod)
8253(CAT Ⅳ Standard prod)
8017(Extension prod long)
9161(Carrying case)
Instruction manual, LR6(AA) × 2
KEW4300 is simplified earth resistance tester (based on 2-pole method) that can
be used for various distribution lines and electrical appliances and it also can mea-
sure AC/DC voltage. (As for AC voltages, true rms values can be obtained.)
44
EARTH CLAMP TESTERS
MODEL 4200/KEW 4202 Earth resistance
4200
20.00/200.0/1500Ω
4202
Download
KEW Smart 4202
Recorded data can be transferred Measured data with time and location Comparator function informs when the mea-
(up to 100 measurements) info can be sent by E-mail sured value is lower/higher than the preset
value
Beep! Beep!
Measurement E-mail
results
GPS data collection may be lost since the GPS signal differs depending on the
location of satellites.
To access GPS data and send emails, an Internet connection is required.
Communication charges may be incurred separately for using these functions.
※Available on the Android devices equipped with Bluetooth/ GPS/ Data communica-
Accessories tion function.
Max communication distance :10m
Bluetooth is a registered trademark of the Bluetooth SIG, Inc.
Android is a registered trademark of the Google Inc.
www.kew-ltd.co.jp 45
LOOP/PSC TESTERS
MODEL 4118A Loop impedance ranges 20/200/2000Ω
4118A
with low test current (15mA). The current will not cause tripping out involved RCD even
the one with the lowest nominal differential current (30mA).
• Direct reading of Prospective Short Circuit Current (PSC).
• Measure low loop resistances(resolution of 0.01W)
• Automatic lock-out if test resister overheats.
• Large custom digital display readout .
• Visual indication of reversed phase and neutral wiring at socket.
• Designed to IP54 Rating
Accessories
■ Method of earth fault loop impedance testing at socket outlet. As shown in Fig., total earth fault loop impedance can be
measured by plugging a loop tester into socket . The value of earth fault loop impedance measured represents the sum
of transformer coil winding resistance, phase conductor (L3) resistance and protective conductor (PE) resistance as well
as source earth resistance and installation earth resistance. With the loop tester set to any one of the PSC (prospective
short circuit current) range, it is also possible to measure earth fault current.
Fig. Earth fault loop impedance testing at socket outlet.
46
LOOP/PSC TESTERS
KEW 4140
• Anti-Trip Technology for complete trip free Loop testing on all RCDs rated
30mA and above.
• Dual Display allows simultaneous measurements like Loop & PFC/PSC.
• Two wire connection for Loop L-L, L-N and PSC testing is possible.
• Phase rotation, Voltage and Frequency measurements.
• Lock-down test button for 'hands free' testing with auto-start operation.
• Display and front panel keyboards with Backlight to be visible in dark places.
• Water and Dust proof (IP54)
4140
Loop Impedance
Function L-PE ATT OFF L-PE ATT ON L-N/L-L
L-N: 230V (50/60Hz)
Rated voltage 230V (50/60Hz)
L-L: 400V (50/60Hz)
LOOP/PSC TESTERS
Operating Voltage 100 - 280V (45 - 65Hz) 100 - 500V (45 - 65Hz)
Range (Auto-Ranging) 20/200/2000Ω 20/200/2000Ω (L-N<20Ω) 20Ω
20Ω:6A/40ms
Nominal Test Current at 0Ω External Loop: L-N:6A/60ms
200Ω:2A/20ms 20Ω:6A/20ms
Magnitude/Duration at 230V N-PE:10mA/approx. 5s
2000Ω:15mA/500ms
L-N: ±3%rdg±4dgt
Accuracy ±3%rdg±4dgt (*1) ±3%rdg±6dgt (*1)
L-L: ±3%rdg±8dgt
PFC(L-PE)/PSC(L-N/L-L) (*2)
Function PSC PFC (ATT) PSC
L-N: 230V (50/60Hz)
Rated voltage 230V (50/60Hz)
L-L: 400V (50/60Hz)
Operating Voltage 100 - 280V(45 - 65Hz) 100 - 500V(45 - 65Hz)
Range (Auto-Ranging) 2000A/20kA 2000A/20kA(L-N<20Ω) 2000A/20kA
20Ω:6A/40ms
Nominal Test Current at 0Ω External Loop: L-N:6A/60ms
200Ω:2A/20ms 20Ω: 6A/20ms
Magnitude/Duration at 230V N-PE:10mA/approx. 5s
2000Ω:15mA/500ms
Phase Rotation
Operating Voltage 50 - 500V, 45 - 65Hz
Correct phase sequence : displayed “1.2.3” and mark
Remarks
Reversed phase sequence : displayed “3.2.1” and mark
Volts
Function Volts Frequency
Measuring range 0 - 500V 45 - 65Hz
Accuracy ±2%rdg±4dgt ±0.5%rdg±2dgt
IEC 61010-1 CAT Ⅲ 300V (500V L to L)
Applicable Standards
IEC 61557-1,3,7,10, IEC 60529 (IP54), IEC 61326(EMC)
Power source LR6/R6(AA)(1.5V) × 6 *Use of alkaline batteries (LR6) is recommended.
Accessories
Dimensions
Weight
84(L) × 184(W) × 133(D)mm
860g (including batteries.) Optional Accessories
Main test lead (*3), Distribution board test lead (*4), 9155 (shoulder strap), 9156 (Soft case)
Accessories included
LR6 (AA) × 6, Instruction manual
*1: Accuracy of L-N LOOP displayed on the Sub Display is synchronized with the one at L-N/L-L function.
*2: PSC/PFC Accuracy is derived from measured loop impedance specification and measured voltage specification.
*3: 7187A:(UK)British plug, 7218A:(EU)European SHUKO plug, 7221A:(SA)South african plug, 7222A: (AU)Australian plug
*4: 7246 : Blue, Green, Red, 7247 : Black, Green, Red
Accessories
www.kew-ltd.co.jp 47
RCD TESTERS
MODEL 5406A Rated tripping current 10/20/30/200/300/500mA
5406A
Accessories
• Custom microprocessor controlled for highest accuracy and reliability.
• 3 LEDs for checking correct wiring status. Molded plug test leads
• 0 and 180 degree phase angle switch permits quick tests and consistent readings. MODEL 7123
RCD TESTERS
48
PORTABLE APPLIANCE TESTERS
KEW 6205 NEW
Mains voltage indication
6205
The KEW 6205 is a hand-held portable appliance tester and can test electrical
safety of Class Ⅰ and Class Ⅱ appliances. The Tester performs test and indicates
PASS/FAIL result complying with the criteria of judgement defined in the AS/NZS
3760:2010 for In-service safety inspection and testing of electrical equipment.
Test Function
Function Tests of contents Color status back light
ClassⅠTest Protective conductor resistance
(Test current 200mA DC nominal) PASS / FAIL result complying with AS/NZS 3760
Insulation resistance test (250V or 500V)
Leakage current test (100-253V/50Hz)
Load current test (100-253V/50Hz)
ClassⅡ Test Insulation resistance test (250V or 500V)
Leakage current test (100-253V/50Hz)
Load current test (100-253V/50Hz)
Extension Lead Test Protective conductor resistance
(Test current 200mA DC nominal)
Insulation resistance test
(between Line/Neutral-Earth short, Line/Neutral)
Leakage current test (100-253V/50Hz)
PASS FAIL
Polarity test
RCD Test RCD test (10mA/30mA)
MODEL 7277 MODEL 7129A MODEL 7161A MODEL 7276 MODEL 9193 MODEL 8263-USB MODEL 7275
Mains lead Test lead with Flat test prod Adaptor for Carrying case USB cable with Printer cable
Alligator clip Extension cord "KEW Report(software)"
49
PORTABLE APPLIANCE TESTERS
KEW 6201A RPE 20Ω Protective Conductor Resistance Test
6201A
Test Function
Function Tests of contents
ClassⅠ Test Protective conductor resistance
Insulation (250V or 500V)
SELECT Switch + ClassⅠ Test Protective conductor resistance
Leakage Current test
ClassⅡ Test Insulation (250V or 500V)
SELECT Switch + ClassⅡ Test Leakage Current test
Extension Leads test Protective conductor resistance
Insulation P/N-PE
Polarity
SELECT Switch + Extension Leads test Protective conductor resistance
Leakage Current test
Leakage Current Test Leakage current measurement
Plug
MODEL 7123 MODEL 7129A MODEL 7161A MODEL 7140 MODEL 7121B
Molded plug test leads Test lead with Alligator clip Flat test prod Adapter for Extension cord Distribution board test leads
50
MULTI FUNCTION TESTERS
MODEL 6018 Insulation testing
6018
Accessories
Optional Accessories
Plug
www.kew-ltd.co.jp 51
MULTI FUNCTION TESTERS
KEW 6010B Continuity testing
6010B
5 in 1 Rated voltage
Accuracy Test current
230V+10%, -15% 50Hz
× 1/2 : -8%, -2% × 1, Fast : +2%, +8%
Continuity Insulation DC : ±10% Auto ramp: ±4%
20/200Ω 500/1000V Trip time ±(1%rdg+3dgt)
Uc testing
Loop RCD Measuring range 100V
20/2000Ω 10/30/100/300/500mA Rated voltage 230V +10%, -15% [50Hz]
Uc Test current 5mA at IΔn=10mA
15mA at IΔn=30/100mA
100V 150mA at IΔn=300/500mA
Accuracy +5% to +15%rdg±8dgt
Accessories General
Applicable Standards IEC 61010-1 CAT Ⅲ 300V Pollution degree 2
MULTI FUNCTION TESTERS
Optional Accessories
MODEL 8212-USB MODEL 8212-RS232C MODEL 7133B Distribution board
USB adaptor with “KEW Report (Software)” RS232C adaptor with “KEW Report (Software)” test leads
Specifications
MODEL 8212-USB MODEL 8212-RS232C
Communication method USB Ver1.1 -
"KEW Report" Software for report
Driver type Virtual COM port -
“KEW Report” transfers measurement data from
Communication speed 19200bps max. 9600bps max. the KEW6010B to a PC via MODEL8212-USB or
Adaptor : 53(L) × 36(W) × 19(D)mm Adaptor : 61(L) × 36(W) × 19(D)mm MODEL8212-RS232C.
Dimensions
Cable : 2m approx. Cable : 1.6m approx.
Operating temperature and humidity -10 - +50°C 85%RH or less with no condensation 0 - +40°C 85%RH or less with no condensation
Storage temperature and humidity -20 - +60°C 85%RH or less with no condensation
System Requirements
OS: Windows® Vista/7/8/10 Hard-disk: Space required 20Mbyte or more
Display: XGA (Resolution 1024 × 768 dots) or more Others: With CD-ROM drive and USB port
®
*Windows is a registered trade mark of Microsoft in the United States.
52
MULTI FUNCTION TESTERS
MODEL 6011A Continuity testing
6011A
UK
EU
SA
KAMP 10 MODEL 7122B MODEL 7132A (KSLP5) MODEL 7133B (OMA DIEC)
Test lead with IEC connector Test leads External earth probe (6011A only) Distribution board test leads
www.kew-ltd.co.jp 53
MULTI FUNCTION TESTERS
KEW 6016
10 in 1
Continuity Insulation Loop
Continuity Measurement 20/200/2000Ω 250/500/1000V 20/200/2000Ω
Continuous testing can be carried out by use of the test button lockdown
feature. A selectable buzzer gives instantaneous indication of continuity. Null
facility eliminates the test lead resistance from the results, the nulled value is
PSC PFC RCD
retained even if the instrument is switched off. Live circuit warnings are given 2000A/20kA 2000A/20kA 10/30/100/300/500/1000mA
by a flashing LED, buzzer and indication on the display.
Earth ACV
Insulation Measurement
20/200/2000Ω 500V
Three selectable test voltages 250V, 500V and 1000V. An auto-discharge func-
tion ensures that circuits are not hazardous after testing. A red LED gives warn-
ing of high voltage output during testing and discharging of the circuit. In case Phase rotation Frequency
of connecting to a live circuit, a live circuit warning is given by flashing LED,
buzzer and indication on the display.
A patented (ATT) low current loop impedance test enables high accuracy loop measurements (up to 0.01 ohm) and quick testing without tripping RCDs.
A high current alternative is selectable for even higher accuracy and instantaneous results. The subsequent test will default to the low current test, this saves any inadvertent trip-
ping of the RCD. The KEW6016 allows also for phase to phase loop tests.
RCD Measurement
The KEW 6016 has a comprehensive RCD test feature for RCD type AC (Alternative Currents), RCD type A (Pulsating Direct Currents), General and Selective (delayed).
Measures at 1⁄2 ×, 1 ×, 5 × of nominal RCD current. It also has Ramp Test and Auto test where all results are shown on one screen. Touch voltage limit can be selected for 25V or
50V depending on application.
Earth Measurement
Using the classical Volt-Amper method with two auxiliary earth spikes and without external power source. All test leads and spikes are supplied as standard accessories.
Phase rotation
KEW 6016 can check the phase rotation of three phase lines with clear indication of the sequence on the display.
Voltage Measurement
In addiction to the voltage measurement, this function gives also the Frequency of the voltage under test.
Memory Function
Save and display up to 1000data.
54
MULTI FUNCTION TESTERS
6016
Continuity RCD
Range 20/200/2000W (Auto-ranging) X1/2: 2000ms
Open circuit voltage (DC) 5V±20%(*1) X1: G:550ms / S: 1000ms
Short circuit current >200mA Trip current Duration X5: 410ms
±0.1W (0 - 0.19W ) Goes up by 10% from 20% to 110%
Accuracy Ramp:
±2%rdg+8dgt (0.2 - 2000W) G:300ms/S:500msX10 times
Insulation resistance X1/2, X1, X5,
230V+10%-15% 50/60Hz
Range 20/200/2000MW (Auto-ranging) Ramp, Uc:
20/200MW 250V+25% -0% Depending on the accuracy at each function.
Open circuit voltage (DC) Rated voltage Measurement sequence:
20/200/2000MW 500V+25% -0%, 1000V+20% -0%
20/200MW 1mA or > @ 250kW Auto: X1/2 0°→X1/2 180°→X1 0°→X1 180°→X5 0°→X5 180°
Rated current Measurements with x5 are not carried out for RCDs
20/200/2000MW 1mA or > @ 500kW, @ 1MW
±2%rdg+6dgt (0 - 19.99MW) with nominal current of 100mA or more.
20/200MW AC Type X1/2: -8% - -2%, X1, X5: +2% - +8%, Ramp: ±4%
±5%rdg+6dgt (20 - 200MW)
Accuracy Accuracy Trip current X1/2: -10% - 0%, X1, X5: 0% - +10%, Ramp: ±10%
±2%rdg+6dgt (0 - 199.9MW) A Type
20/200/2000MW Uc: +5% - +15%rdg±8dgt
±5%rdg+6dgt (200 - 2000MW)
Loop impedance Earth
Function L-PE, L-PE (ATT), L-N / L-L Range 20/200/2000W Auto-Ranging
L-PE, L-PE (ATT): 100 - 260V (50/60Hz) 20W: ±3%rdg+0.1W
Accuracy
Rated voltage L-N: 100 - 300V (50/60Hz) 200/2000W: ±3%rdg+3dgt (Auxiliary earth resistance 100±5%)
L-L: 300 - 500V (50/60Hz) Phase Rotation
20W: 6A/20ms Rated Voltage 50-500V 50/60Hz
Nominal test current at 200W: 2A/20ms Correct phase sequence: are displayed “1.2.3” and mark
Remarks
0W external loop: 2000W: 15mA/500ms Reversed phase sequence: are displayed “3.2.1” and mark
Volts
Magnitude/Duration at 230V L-N: 6A/60ms
N-PE: 10mA/approx. 5s Function Volts Frequency
Range 20/200/2000W Auto-Ranging (L-N < 20W) Rated voltage 25 - 500V, 45 - 65Hz
L-PE, L-N / L-L: ±3%rdg+4dgt*2 ±3%rdg+8dgt*3 Measuring range 25 - 500V 45 - 65Hz
Accuracy Accuracy ±2%rdg+4dgt ±0.5%rdg+2dgt
L-PE (ATT): ±3%rdg+6dgt*2 ±3%rdg+8dgt*3
PSC (L-N/L-L) / PFC (L-PE) General
Function PSC, PFC, PFC (ATT) IEC 61010-1 CAT Ⅲ 300V(500V L to L) Pollution degree 2
PSC: 100 - 500V 50/60Hz Applicable Standards IEC 61557-1,2,3,4,5,6,7,10
Rated voltage IEC 60529(IP40), IEC 61326(EMC)
PFC, PFC (ATT): 100 - 260V 50/60Hz
Nominal test current at PSC: 6A/20ms Power source LR6 × 8
0W external loop: PFC: 6A/20ms, 2A/20ms, 15mA/500ms Dimensions 136(L) × 235(W) × 114(D)mm
Weight 1350g (including batteries.)
Magnitude/Duration at 230V PFC (ATT): L-N: 6A/60ms, N-PE: 10mA/approx. 5s
Main test lead*4 7196A(Test leads with remote control switch)
Range 2000A/20kA Auto-Ranging
7188A(Distribution board fused test leads)
PSC/PFC accuracy is derived from measured loop impedance
Accuracy 7228A(Earth resistance test leads)
specification and measured voltage pecification
7221A
7218A
7222A
MODEL 7188A MODEL 7196A Main test lead MODEL 7228A MODEL 8032 MODEL 9142
Distribution board fused test Test leads with remote control Plug Earth resistance test leads Auxiliary earth spikes Carrying Case
leads switch [2 spikes/set]
System requirements
OS: Windows® Vista/7/8/10
8212-USB MODEL 8212-RS232C Display: XGA (Resolution 1024 × 768 dots) or more
Hard-disk: Space required 20Mbyte or more
MODEL RS232C adaptor with “KEW Report (Software)” Others: With CD-ROM drive and USB port
USB adaptor with “KEW Report (Software)” * Windows® is a registered trademark of Microsoft in the United States.
www.kew-ltd.co.jp 55
PV INSULATION EARTH TESTER
KEW 6024PV NEW
AUTO POWER
USB OFF
PV Insulation Insulation
500/1000V 250/500/1000V
Earth Volts
20/200/2000Ω AC 600V/DC 1000V
PV INSULATION EARTH TESTER
6024PV
Insulation resistance PV Insulation* Insulation
Test voltage 500V 1000V 250V 500V 1000V
Measuring range
20.00/200.0/2000MΩ 20.00/200.0/2000MΩ
(Auto range)
Mid-scale value – 50MΩ
Rated current 1.0 - 1.2mA
–
0.25MΩ 0.5MΩ 1MΩ
First effective measuring range 1.51 - 200.0MΩ 1.51 - 1000MΩ 1.51 - 100.0MΩ 1.51 - 200.0MΩ 1.51 - 1000MΩ
Accuracy ±1.5%rdg±5dgt ±1.5%rdg±5dgt
Second effective 0.00 - 1.50MΩ 0.00 - 1.50MΩ 1.20 - 1.50MΩ 1.20 - 1.50MΩ 1.20 - 1.50MΩ
measuring range 200.1 - 2000MΩ 1001 - 2000MΩ 100.1 - 2000MΩ 200.1 - 2000MΩ 1001 - 2000MΩ
Accuracy ±5.0%rdg±6dgt
Open circuit voltage 0 - +20%
Short circuit current Max 1.5mA
Earth resistance
Measuring range(Auto range) 20.00/200.0/2000Ω
Accuracy ±3.0%rdg±0.1Ω (20Ω range) ±3.0%rdg±3dgt (200/2000Ω range)
Voltage measurement
Measuring range AC 5 - 600V (45 - 65Hz) DC ±5 - 1000V
Accuracy ±1.0%rdg±4dgt
General
Applicable Standards IEC 61010-1 CAT Ⅳ 300V, CATⅢ 600V Pollution2
IEC 61010-2-030, IEC 61010-031, IEC 60529(IP54), IEC 61557-1,-2,-5,-10, IEC 61326-1,2-2
Power source LR6(AA)(1.5V) × 6
Dimensions 84(L) × 184(W) × 133(D)mm
Weight Approx. 900g (including batteries)
Accessories 7196A(Test leads with remote control switch), 7244A(Test lead with alligator clip), 8017(Extension prod long), 8072(CAT Ⅱ Standard prod),
8212-USB(USB adaptor with “KEW Report(Software)”), 9155(shoulder strap), 9156(Carrying case), LR6(AA) × 6, Instruction manual
Optional 7243(L-shaped probe), 7245A(Precision measurement cord set), 8016(Hook type prod)
*6024PV supports the PV systems up to 1000V.
56
PV INSULATION EARTH TESTER
Insulation
Junction box
Insulation
Accurate and quick results also in case of large capacitance effects. Analyzing and processing the recorded data with a PC.
(Red)
[Data no.] [Site no.2]
AC Number of saved data E.g.: Number of the measured strings
www.kew-ltd.co.jp 57
POWER METERS
58
POWER METERS
Selection Guide of Power Meters
Power Meter Power Quality Analyzer Loggers
Appearance
Voltage [V]
Current [A]
Ior Resistive leakage current [mA] − − − −
Power [W] − − −
Frequency [Hz] − −
Energy [Wh] − − −
Harmonics − − − −
Power Quality Swell − −
Dip − −
Interruption − −
Transients − − −
Inrush Current −
Memory SD card SD card Inner memory Inner memory SD card
Number of Input Channel 6ch (V3, A3) 7ch (V3, A4) 3ch 3ch 5ch (V1, A4)
Power Quality
● Swell
Swell is a instantaneous voltage increase, most of the time originated by
upstream power line failure or switching OFF large load or switching ON
large capacitor.
POWER METERS
● Dip
Dip, as the opposite of a swell, is a instantaneous voltage decrease, most
of the time caused by switching ON large load e.g. motors or by down-
stream power line failure.
● Interruption
Interruption is a power line cut-off from any source of supply. It can be
caused by a fault in a power line, which causes switch gear to open.
● Inrush Current
Inrush current is a surge current that happens when motors, large or low-
impedance loads are switched ON.
Then the current will stabilize as soon as the load has reached normal
working conditions.
www.kew-ltd.co.jp 59
POWER METER
KEW 6305
External
USB Bluetooth Power Supply
• Comprehensive real-time monitoring, recording and analysis of single and 3-phase • Synchronous measurements between two units of KEW6305
systems • Wide selection of clamp sensors allow measurements from 0.1A to 3000A
• Voltage, Current, Power Factor and Frequency measurements • The instrument automatically recognizes what kind of clamp sensor is connected to it
• Power analysis (Active, Apparent and Reactive power) • Double power supply system via AC line and batteries
• Energy analysis (Active, Apparent and Reactive energy)
• Active power accuracy: ±0.3%rdg±0.2%f.s.
• Automatic wiring check function to prevent incorrect connections
• Large memory capability (2 GB) using built-in SD card Interface
6305
Wiring connections 1P2W, 1P3W, 3P3W, 3P3W3A, 3P4W
• Recording interval can be set between 1second and 1hour.
Measurements Voltage, Current, Frequency, Active power
• Real time & remote measurements using Android application
Parameters Apparent power, Reactive power, Active energy, Apparent energy,
• Windows software for data analysis and setting via USB port or Bluetooth Reactive energy, Power factor (cos θ), Neutral current
Voltage range[RMS] 150.0/300.0/600.0V
As easy as 1 ➜ 2 ➜ 3 ! Voltage accuracy ±0.2%rdg±0.2%f.s. (sine wave, 45 - 65Hz)
POWER METER
60
POWER METER
Bluetooth communication with Android application
Free Andoroid software "KEW
Smart 6305" is available on
Real time & remote measurements using Android application
download site Measurement can be displayed in graphic or numeric forms on Android devices in real-time via
Bluetooth communication.
Remote checking of measurements is possible without accessing KEW6305.
Android device
Download
Real-time display
*communication charges may be incurred separately Max communication distance: 10m Bluetooth is a registered trademark of the Bluetooth SIG, Inc.
to download application Android is a registered trademark of the Google Inc.
Set Model
KEW 6305-01 KEW 6305-03
KEW 6305 × 1 KEW 6305 × 1
MODEL 8125 × 3 MODEL 8130 × 3
POWER METER
【System requirements】
OS: Windows® Vista/7/8/10
Display: XGA(Resolution 1024 × 768 dots) or more
Hard-disk: space required 1Gbyte or more
Other: With CD-ROM drive and USB port
.NET Framework (3.5 or more)
* Windows® is a registered trademark of Microsoft in the United States. Carrying case : 9125 Carrying case : 9135
Optional
Load current clamp sensors Load current flexible clamp sensors
MODEL 8128 MODEL 8127 MODEL 8126 MODEL 8125 MODEL 8124 KEW 8129
8129-01 (for 1ch)
8129-02 (for 2ch)
8129-03 (for 3ch)
FLEXIBLE CLAMP
SENSOR
WITH 3 RANGES
AC300, 1000, 3000A
MAX MAX MAX MAX MAX MAX
50A Ø24 100A Ø24 200A Ø40 500A Ø40 1000A Ø68 3000A Ø150
www.kew-ltd.co.jp 61
POWER QUALITY ANALYZER
KEW 6315 Wiring connections 1P2W, 1P3W, 3P3W, 3P4W
6315
Trend and demand graphs for easy recognition. TFT color display 8326-02(SD card 2GB), 9125(Carrying case),Input terminal plate × 6,
with high resolution. KEW Windows for KEW6315(software),
• IEC 61010-1 CAT Ⅳ 300V,CAT Ⅲ 600V,CAT Ⅱ 1000V Quick manual, LR6(AA) × 6
Instantaneous value • Can display voltage and current by vector per Ch.
• Measures instantaneous / average / min / max
for voltage, current, active / reactive / apparent
power, PF (cosfi) and line frequency all on one
screen.
Waveform
• Trend of all main parameters and customized
Zoom functions. • Displays voltage and current on each Ch by waveform.
Harmonics Analysis
Integration value
• The display will list the active / reactive / appar- • Graphic display of harmonic components up to 50th order
ent energy in total and for each phase consumed for voltage, current and power.
(or generated in case of co-generation like solar
panels, etc).
Event
Demand
• To support demand control, present energy us- • Measures voltage swells / dips / interruptions / transients
age and estimated value are displayed on a graph and inrush currents that may indicate a weak power distribu-
while recording max demand value and the oc- tion system. Such phenomena may damage or reset devices.
curred time. All necessary data is displayed by pressing one key.
62
POWER QUALITY ANALYZER
Quick Start Guide One-Touch START/STOP Key for Quick Start Guide providing easy setup guides.
Guide start Connect to the circuit Wring check Select interval Set recording time Start recording
Windows software for data analysis and setting via USB port Real time and Remote measurements
Copyright
KYORITSU ELECTRICAL
INSTRUMENTS WORKS, LTD.
KEW 6315
2013
〈System requirements〉
www.kew-ltd.co.jp
NET Framework (3.5 or more) ※Bluetooth is a registered trademark of the Bluetooth SIG,
※Windows®is registered trademark of Microsoft in the United States. Inc.
Android is a registered trademark of the Google Inc.
Optional Accessories
Load current clamp sensors Leakage &Load current clamp
Load current flexible clamp sensors Can you close your distribution board
door during surveys?
The KEW6315 facilitates safe test-
ing by being extremely compact
MAX and with two clever option extras: a
3000A Ø150 magnetic case(9132) for attaching it
8129-01 (for 1ch) to the sides of metal enclosures and
a power supply adaptor(8312) which
8129-02 (for 2ch) takes the power for the instrument
8129-03 (for 3ch) MAX
1000A Ø110 from the supply being measured.
REC item
Interval
Power +Harmonics
1sec 13days 3days
1min 1-year or more 3months
30min 10-year or more 7-year or more
KEW 6315-01 KEW 6315-03
Data of power quality events are not considered to
8125(500A) × 3 8130(1000A) × 3
estimate the possible recording time. The max pos-
sible time will be shortened by recording such events. Carrying case : 9125 Carrying case : 9135
www.kew-ltd.co.jp 63
LOGGERS
KEW 5010/5020
External
USB Power Supply
Selection of One-time mode or Endless mode The user friendly PC software ” KEW LOG Soft ”is supplied.
One-time on : • Supplied with the user friendly software ” KEW LOG Soft 2”.
Recording will stop when memory is used up. • This permits editing, analysis and graphical display of data.
One-time off : • The recorded data is downloadable onto a PC via USB cable.
Overwrite the old data, and store the latest data. • Variation of the measured voltage and current data can be confirmed simultaneously
on the PC display monitor. (only on KEW 5020)
Non Volatile Memory • Simplified Power Integration
Recorded data will be retained even if the batteries are exhausted or replaced due to (The “KEW LOG Soft 2” uses current and voltage recorded to calculate the integral
the presence of a nonvolatile memory (guaranteed for 10 years) power consumption)
• Continuous measuring time : Approx. 10 days (Alkaline Battery)
Battery power indicator
Indicates battery voltage in 4-levels.
(It is possible to use the logger for a further approx 24 hours even after the warning
symbol is flashing.)
5010 5020
Recording mode Normal, Trigger, Capture Normal, Trigger, Capture, Power quality analysis
Operating system Successive approximation(CH1 single synchronized sampling)
Rated max. working voltage AC9.9Vrms, 14V peak value
Number of input channel 3ch
Measuring method True RMS
LOGGERS
64
LOGGERS
4 recording modes make various measurements possible
Normal recording mode Trigger recording mode
For monitoring power line status or an intermittent leakage. For observing an irregular operation of an ELCB/RCD, an
irregular current / voltage.
• Records the variation of the • Detects the value, time and
current / voltage in a given frequency of the current / volt-
interval (For monitoring the age when the preset value is
variation of the current / volt- exceeded. 8 data(for approx. 0.8sec)
age against time.)
• When the detection level (i.e.
• A choice of 15 recording inter- preset value) is exceeded, 8
vals are available: 1 sec. to 60 min. data points (True RMS values
(1,2,5,10,15,20,30 sec, 1,2,5,10,15,20,30,60 min.) for approx. 0.8 sec) and peak value are recorded before and after the
preset value is exceeded.
• The average of the measured value in every recording interval is
recorded. The Max., Min. and Peak values (sampled crest value con- • Inrush current or an abnormal current / voltage can be detected by
verted to sine RMS value) are recorded every 10 readings. sampling the inputs at every 1.6ms.
• LED flickers when the measured values exceed the preset current /
voltage value.
LOGGERS
Easy to set up with a PC Large data can be easily processed • The type of the sensor connected to the logger
will be automatically recognized.
A graph can be made by just one click Display of Power Quality Capable of registering the names of 1,000 sites
www.kew-ltd.co.jp 65
Ior LOGGERS
KEW 5050 NEW
Wiring configuration 1P2W, 1P3W, 3P3W, 3P4W
5050
External Measurements and Ior : Leakage current (Trms) with resistive components only
USB Power Supply parameters Io : Leakage current (Trms) with basic wave of 40 - 70Hz
Iom : Leakage current (Trms) including harmonic components
V : Reference voltage (Trms) with basic wave of 40 - 70Hz
Vm : Reference voltage (Trms) including harmonic components
R : Insulation resistance, Frequency(Hz), Phase angle(θ)
Other functions Digital output, Print screen, Back light, Data hold
Recording Interval 200/400ms/1/5/15/30s/1/5/15/30m/1/2hours
Ior
Range 10.000/100.00/1000.0mA/10.000A/AUTO
Accuracy For reference voltages of sine wave 40 - 70Hz and 90V Trms or higher,
±0.2%rdg±0.2%f.s. + clamp sensor amplitude accuracy + error
of phase accuracy*
(phase error)
* add ±2.0%rdg to measured Io value when using Ior leakage
clamp sensor.
(θ: within the accuracy of reference voltage/ current phase
difference ±1.0°)
Allowable input 1% - 110% (Trms) of each range, and 200% (peak) of the range
Display range 0.15% - 130% (display “0” for less than 0.15%, “OL” if the range
is exceeded)
Kew 5050 is an innovative Leakage Current Logger that can identify the resistive compo- Io *Range, Allowable input and Display Range are the same as Ior .
nent of leakage current (Ior) in an electrical installation. Despite the capacitive component, Accuracy ±0.2%rdg±0.2%f.s.+ clamp sensor amplitude accuracy
the Ior is the dangerous component of the leakage current because Ior consumes power Iom *Range, Allowable input and Display Range are the same as Ior .
and then it can cause a rise in temperature that can lead to a fire and electric shock. Accuracy ±0.2%rdg±0.2%f.s.+ clamp sensor amplitude accuracy
• Provides simultaneous measurements and logs up to 4 channels Measurement Sampling speed 40.96ksps (every 24.4μs), gapless, calculate
• Supports various wiring systems (Single-phase 2&3-wire, Three-phase 3&4-wire) method Trms values every 200ms.
• World’s fastest 200ms interval for leakage current measurement Voltage
Range 1000.0V
• Offers both traditional leakage / load current measurements
Accuracy ±0.2%rdg±0.2%f.s. * for waveforms of sine wave 40 - 70Hz
• Large graphic display and magnet on the back case to attach it on metal enclosures
Allowable input 10 - 1000V Trms, and 2000V peak
Display range 0.9V - 1100.0V Trms (display “0” for less than 0.9V, “OL” if the
Can measure up to 4 channels simultaneously! Phase angle(θ)
range is exceeded)
Display range 0.0° - ±180.0° (regarding the phase of reference voltage as 0.0°)
Best to diagnose unwanted RCD tripping Accuracy Within ±0.5° for the inputs of 10% or higher of leakage current
range, sine wave 40 - 70Hz, reference voltage of 90V Trms or
higher.
Frequency meter range 40 - 70Hz
The RCD often trips.
External supply AC100 - 240V(50/60Hz) 7VA max
Caused by capacitive
Power source LR6(AA)(1.5V) × 6 (Battery life approx. 11h)
leakage current? Display / update period 160 × 160dots, FSTN monochrome display / 500ms
Or caused by the dangerous resistive PC card interface SD card (2GB) *standard accessory
leakage current of a degraded PC communication- USB Ver2.0
insulation? interface
Temperature and hu- 23±5°C, less than 85%RH(without condensation)
midity range
Ior LOGGERS
66
Ior LOGGERS
Quickly displays occurred events New Measurement method with FFT
Detailed information on the occurred events are displayed on the LCD.
Waveform including harmonics 1st-order component
Different threshold values can be set for each channel and each event.
nth-order component
Remove noise
components using FFT
Accessories
Ior LOGGERS
www.kew-ltd.co.jp 67
SENSORS
Optional Accessories of Loggers, Power Meter and Power Quality Analyzer
68
SENSORS
Load current Clamp sensors
KEW 8129 KEW 8130
MAX MAX
3000A Ø150 1000A Ø110
8129-01 (for 1ch) 8129-02 (for 2ch) 8129-03 (for 3ch) 8130
Conductor size max. f150mm max. f110mm
Rated current AC 300/1000/3000A AC 1000A
Output voltage 300A Range :AC500mV/AC300A (1.67mV/A) AC 500mV/1000A (AC 0.5m V/A)
1000A Range :AC500mV/AC1000A (0.5mV/A)
3000A Range :AC500mV/AC3000A (0.167mV/A)
Accuracy ±1.0%rdg (45 - 65Hz) ±0.8%rdg±0.2mV (45Hz - 65Hz)
±1.5%rdg±0.4mV (40Hz - 1kHz)
Phase shift within ±1° within ±2.0° (45 - 65Hz)
Cable length Output connector Sensor part : Approx. 2m Output cable : Approx. 1m MINI DIN 6PIN Approx. 3m MINI DIN 6pin
Operating temperature & 0 - 50˚C, relative humidity 85% or less (no condensation) -10 - 50˚C, relative humidity 85% or less (no condensation)
humidity ranges
Output impedance 100W or less 100W or less
Applicable Standards IEC 61010-1, IEC 61010-2-032 CAT Ⅲ 600V Pollution degree2, IEC 61326 IEC 61010-1, IEC 61010-2-030,
IEC 61010-2-032
CAT Ⅳ 300V /CAT Ⅲ 600V Pollution degree 2
IEC 61326
Dimensions 111(L) × 61(W) × 43(D) mm (except for protrusions) AMP box 65(L) × 24(W) × 22(D)mm(except for protrusions)
Weight Approx. 410g Approx. 680g Approx. 950g Approx. 180g
Accessories Instruction manual Instruction manual Instruction manual Instruction manual
7199 (Output cable) × 1 7199 (Output cable) × 2 7199 (Output cable) × 3 Cable marker
9137 (Carrying case) 9137 (Carrying case) 9137 (Carrying case) 9095(Carrying case)
Applicable models 5010, 5020, 6305, 6315
MODEL 8128 MODEL 8127 MODEL 8126 MODEL 8125 MODEL 8124
MAX MAX MAX MAX MAX
50A Ø24 100A Ø24 200A Ø40 500A Ø40 1000A Ø68
SENSORS
8128 8127 8126 8125 8124
Conductor size f24mm f24mm f40mm f40mm f68mm
Rated current AC 5A (Max.50A) AC 100A AC 200A AC 500A AC 1000A
Output voltage AC 50mV/5A AC 500mV/100A (AC 5mV/A) AC 500mV/200A (AC 2.5mV/A) AC 500mV/500A (AC 1mV/A) AC 500mV/1000A (AC 0.5mV/A)
[Max. 500mV/50A](AC 10mV/A)
Accuracy ±0.5%rdg±0.1mV (50/60Hz) ±0.5%rdg±0.2mV (50/60Hz)
±1.0%rdg±0.2mV (40Hz - 1kHz) ±1.5%rdg±0.4mV
(40Hz - 1kHz)
Phase shift within ±2.0° (45 - 65Hz) within ±1.0° (45 - 65Hz)
Cable length : Output connector Approx. 3m : MINI DIN 6pin
Operating temperature ranges -0 - 50˚C, less than 85% RH ( without condensation)
Output impedance Approx. 20W Approx. 10W Approx. 5W Approx. 2W Approx. 1W
Applicable Standards IEC 61010-1, IEC 61010-2-032 IEC 61010-1, IEC 61010-2-032
CAT Ⅲ 300V Pollution degree 2 CAT Ⅲ 600V Pollution degree 2
IEC 61326 IEC 61326
Dimensions 100(L) × 60(W) × 26(D)mm 128(L) × 81(W) × 36(D)mm 186(L) × 129(W) × 53(D)mm
Weight Approx. 160g Approx. 260g Approx. 510g
Accessories 9095 (Carrying case), Instruction manual, Cable marker 9094 (Carrying case)
Instruction manual, cable marker
Optional 7146 (Banana φ4 adjuster plug), 7185 (Extension cable)
Applicable models 5010, 5020, 6305, 6315
www.kew-ltd.co.jp 69
SENSORS
Leakage & Load current Clamp sensors
KEW 8146 KEW 8147 KEW 8148
MAX MAX MAX
30A Ø24 70A Ø40 100A Ø68
70
OTHERS
MODEL 5201 Ranges
5201
0.1 - 19990Lux(automatic 3 range switching)
DIGITAL ILLUMINOMETER Accuracy ±5%rdg±1dgt
Measuring time 2 times per second
• Model 5201 is a highly portable and
compact digital illuminometer for Temperature humidity ±3%(at 20°C)
measuring illuminance from 0.1 to characteristics
19,990 Lux, with auto range switch- Angular incident 10° Less than ±1.5%
ing. light characteristics 30° Less than ±3%
60° Less than ±10%
• The digital display is held for a preset 80° Less than ±30%
time (about 20 seconds) and, there- Spectral response Closely related to the spectral
fore, facilitates reading, recording and characteristics luminous efficiency (of a standard observer).
measuring in any direction. Power source 6F22(9V) × 1
Dimensions 166(L) × 68(W) × 32(D)mm
Weight 180g approx.
Accessories Photocell cover
6F22 × 1
Soft carrying case
Instruction manual
OTHERS
www.kew-ltd.co.jp 71
OTHERS
MODEL 5510 Measuring range -40°C - 300°C
5510
45
17
500
1000
72
OTHERS
KEW 8035 Functions
8035
Phase rotation (Clockwise or Counter Clockwise),
Presence of open phase
Non-Contact Safety Phase Indicator
Detection method Electrostatic induction
CAT Ⅳ
600V Measuring voltage range From 70 - 1000V AC phase to phase
(sine wave, continuous input)
Clamp diameter range From φ2.4 to 30mm insulated cables
Measuring frequency 45 to 66Hz
range
Phase rotation Clockwise:
Green arrow LEDs “rotate” in clockwise, Green symbol
“CW” lits, Intermittent buzzer
Counter Clockwise:
Red arrow LEDs “rotate” in counter clockwise, Red symbol
“CCW” lits, continuous buzzer
Visual indication Via LEDs with Super brightness function
Battery voltage warning Power LED blinks if battery voltage is too low.
Operating temperature -10 to 50ºC, relative humidity 80% or less
& humidity range (no condensation)
Storage temperature -20 to 60ºC, relative humidity 80% or less
• New technology permits safe testing, without the need of direct contact between probes and & humidity range (no condensation)
live wires. Applicable Standards IEC 61010-1 CAT Ⅳ 600V, CAT Ⅲ 1000V Pollution degree2
• The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm. Power source LR6(AA)(1.5V) × 4
* Continuous use: Approx. 100 hours (Auto power off in about 10 min.)
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones. Dimensions 112(L) × 61(W) × 36(D) mm
• The instrument can be fixed to a metal panel via the magnet on the back side. Weight 380g approx.
• Wide measuring range for 3 phase installations from 70V to 1000V AC. Test leads Double insulated cables, length approx. 70cm
Colours code L1(U): Red L2(V): White L3(W): Blue
• Super brightness function permits clear LEDs indication also in sunshine.
Accessories 9096 (Carrying case), LR6(AA) × 4,
Instruction manual
DIGITAL PHASE INDICATOR with Time limit for 200V : within 60 minutes
open phase checker continuous 480V : within 4 minutes
Frequency response 20 - 400Hz
Dimensions 82(L) × 59(W) × 23(D)mm
Weight 200g approx.
Cord 1m(R: red S : white T : blue)
Accessories 9070(Carrying case) Pins for test leads
Instruction manual
• Phase indicator designed to check the presence of open phase and also the phase
sequence by LED and buzzer at the same time.
• Small, lightweight, and portable.
photo : 8031F
• Phase indicator designed to check the presence of open phase and also the phase sequence
by rotating disk and lamps.
• Can check a wide range of 3-phase power source from 110V to 600V.
Sealed against dust, the unit ensures trouble-free performance.
• Small, Lightweight and portable. Designed for maximum ease of operation and ruggedness.
• No exposed metal parts, Safety features are incorporated including the MODEL 8031 MODEL 8031
instant push button switch operation.(8031F Only) CE type Standard type
www.kew-ltd.co.jp 73
KEWTECH
KT 200 AC A 40.00/400.0A
KT 200
±2.0%rdg±6dgt(50/60Hz)
AC CLAMP METER
AC V 400.0/600V(Auto-ranging)
Ø30 MAX
400A AC A DC
AC V Ω ±2.0%rdg±5dgt(50/60Hz)
DATA AUTO POWER DC V 400.0/600V(Auto-ranging)
HOLD SAVE
±1.5%rdg±5dgt
• Small and handy clamp meter Ω 400.0/4000Ω(Auto-ranging)
• IEC 61010-1 Safety Standard CAT Ⅲ ±2.0%rdg±5dgt
300V, CAT Ⅱ 600V Continuity buzzer buzzer sounds below 50±35Ω
Conductor size φ30mm max.
• 400A AC Clamp meter
Applicable Standards IEC 61010-1 CAT Ⅲ 300V(ACA), CAT Ⅱ 600V Pollution degree 2
• DMM function ACV, DCV, IEC 61010-2-032, IEC 61326-1
Ω Continuity Buzzer.
Power source R03(1.5V)(AAA) × 2
*Continuous measuring time:approx.200 hours(Auto power save: approx.10 minutes)
Dimensions 184(L) × 68.6(W) × 38.5(D)mm
Weight Approx. 190g(including batteries)
Accessories 7066A(Test leads), R03(AAA) × 2, Instruction manual
Optional 9105(Carrying case)
±3.0%rdg±8dgt[50/60Hz](0 - 40.00A)
AC/DC CLAMP METER
±3.5%rdg±6dgt[50/60Hz](15.0 - 299.9A)
Ø30 MAX
400A
DC
AC A DC
AC V Ω ±4.0%rdg±6dgt[50/60Hz](300.0 - 400.0A)
DATA AUTO POWER DC A 40.00/400.0A (Auto-ranging)
HOLD SAVE ±3.0%rdg±8dgt (0 - 40.00A)
• Small and handy clamp meter ±3.5%rdg±6dgt (15.0 - 299.9A)
±4.0%rdg±6dgt (300.0 - 400.0A)
• IEC 61010-1 Safety Standard CAT Ⅲ
AC V 400.0/600V(Auto-ranging)
300V, CAT Ⅱ 600V
±2.0%rdg±5dgt(50/60Hz)
• 400A AC/DC Clamp meter DC V 400.0/600V(Auto-ranging)
• DMM function ACV, DCV, ±1.5%rdg±5dgt
Ω Continuity Buzzer. Ω 400.0/4000Ω(Auto-ranging)
±2.0%rdg±5dgt
Continuity buzzer buzzer sounds below 50±35Ω
Conductor size φ30mm max.
Applicable Standards IEC 61010-1 CAT Ⅲ 300V(ACA), CAT Ⅱ 600V Pollution degree 2
IEC 61010-2-032, IEC 61326-1
Power source R03(1.5V)(AAA) × 2
*Continuous measuring time:approx.35 hours(Auto power save: approx.10 minutes)
Dimensions 187(L) × 68.5(W) × 38.5(D)mm
Weight Approx. 200g(including batteries)
Accessories 7066A(Test leads), R03(AAA) × 2, Instruction manual
Optional 9105(Carrying case)
KEWTECH
74
KEWTECH
KT 170/171 Voltage test
KT170/171
Voltage Test (Double-pole Test) Bright LEDs and Penlight Single-pole Phase Test
• The voltage is indicated by
LEDs.
Buzzer sounds and Live
KEWTECH
AC +DC -DC
www.kew-ltd.co.jp 75
ACCESSORIES
7025 1,500mm 7066A 1,100mm 7073
❋2WAY Output cord
2,120mm
Applicable model Applicable model Applicable model
3165 1009 2046R 2413F
3166 1011 2055 2413R
1012 2056R
1020R 2117R
1021R 2127R
1109S 2608A
1110 KT200
2007R KT203
7082
❋Lead for recorder
1,100mm 7083
❋Lead for battery charging
5,200mm 7084
❋Earth and guard leads
5,000mm
Applicable model Applicable model Applicable model
3124 3124 3124
Plug f4 Plug f4
7095A
❋Earth resistance test leads
7100A 7103A/7139A
Applicable model Applicable model Line 1,000mm Earth 1,550mm
4102A 4102A ❋Test leads with remote control swtich
4105A 4105A Applicable model
6018 6018
7103A 7139A
3021A 3023A 3161A
3022A 6018
Green: 5m Green: 5m
Yellow: 10m Yellow: 10m
Red: 20m Consists of : Red: 20m
7095A(Earth resistance test leads)
8032(Auxiliary earth spikes)
Plug f4 8200-03(Cord reels [3pcs]) Plug f4
9091(Carrying case for cord reels) photo : 7103A Plug
Plug
Plug f4 Plug
photo : 7115
76
ACCESSORIES
7127A
❋Simplified measurement probe
1,570mm 7127B
❋Simplified measurement probe
1,570mm 7128A 1,390mm
Applicable model Applicable model Applicable model
4102A 4105DL 5410
4105A
Plug f4 Plug f4
7140
❋Adaptor for extension cord
400mm 7141B
❋Voltage test lead set
3,000mm 7146
❋Banana f4 adjuster plug
190mm
Applicable model Applicable model Applicable model
6201A 6305 8121 8128
6315 8122 8141
8123 8142
8124 8143
8125 8146
8126 8147
8127 8148
Plug f4 Plug f4
7149A/7150A
❋Test leads with remote control switch set
Line 1,000mm Earth 1,550mm 7153B
❋Safety test leads
1,220mm
Applicable model Applicable model
1009 2046R
7149A 7150A 1011 2055
3161A 3021A 1012 2056R
3022A 1021R 2117R
3023A 1110 2127R
2007R 2608A
7149A 7150A ACCESSORIES
Plug
f4
photo : 7149A
www.kew-ltd.co.jp 77
ACCESSORIES
7157B/7158B 7159B
❋Safety test leads with fuse
1,220mm 7165A
❋Line probe
3,000mm
Applicable model Applicable model Applicable model Applicable model
7153B 7154B 7155B 7156B 1009 2117R 3025A
1011 2127R 3121B
1012 2608A 3122B
1021R 3165 3123A
1110 3166 3125A
2007R 6010B 3127
2046R 6011A
2055 6016
2056R
Plug f4
7157B 7158B
7168A
❋Line probe with alligator clip
3,000mm 7170
❋Power cord
2,000mm 7185
❋Extension cable
3,000mm
Applicable model Applicable model Applicable model
7221A 7222A
7187A : UK plug
7218A : EU plug
7221A : SA plug
7222A : AU plug
photo : 7218A Plug f4
Plug f4 Plug
7196A
❋Test leads with remote
1,550mm 7199
❋Output cable
1,000mm 7219 1,950mm
Applicable model Applicable model ❋USB cable Applicable model
control switch
6016 8129 6315
6024PV
ACCESSORIES
Plug f4
78
ACCESSORIES
7226A
❋Line probe
3,000mm 7227A 3,000mm
❋Line probe with alligator clip
7228A
❋Earth resistance test leads
Applicable model Applicable model Applicable model
3128 3128 6016
Green : 5m
Yellow : 10m
Red : 20m
Plug f4
7229A
❋Earth resistance test leads
7234
❋Alligator clip
1,080mm 7238A
❋Simplified measurement
1,570mm
Applicable model Applicable model Applicable model
test leads
4106 1009 1051 4106
Green : 20m 1011 1052
Yellow : 20m 1012 1061
1020R 1062
Black : 20m
1021R
Red : 40m
7243
❋L-shaped probe
1,650mm 7244A 1,400mm 7245A
Applicable model Applicable model Applicable model
3431 6024PV 6024PV
6024PV
Consists of :
7228A(Earth resistance test leads) Green : 5m
f4
8032(Auxiliary earth spikes[2 spikes/set]) Yellow : 10m
Plug 8200-03(Cord reels[3 pcs])
9142(Carrying bag) Red : 20m
Plug f4
photo : 7246 Plug f4 photo : 7253
Plug f4 Plug f4
www.kew-ltd.co.jp 79
ACCESSORIES
7264
❋Earth cord
3,000mm 7265
❋Guard cord
3,000mm 7266
❋Earth resistance test leads
Applicable model Applicable model
3025A 3025A Applicable model
3121B 3121B 4105DL
3122B 3122B Green: 5m
3125A 3125A Yellow: 10m
Red: 20m
Plug f4
7267 20m
❋Cable reel for Earth resistance tester (Red)
7268 10m
❋Cable reel for Earth resistance tester (Yellow)
7269 20m
❋Earth resistance test lead (Red)
Plug f4
7270 10m
❋Earth resistance test lead (Yellow)
7271 5m
❋Earth resistance test lead (Green)
7272
❋Precision measurement Cord set
Applicable model
Applicable model Applicable model
4105DL
4105DL 4105DL
Consists of :
7267(Cable reel for Earth resistance tester (Red))
7268(Cable reel for Earth resistance tester (Yellow))
7271(Earth resistance test lead (Green)) Green: 5m
Plug f4 Plug f4 8041(Auxiliary earth spikes[2 spikes/1set]) Yellow: 10m
9192(Carrying case for cord reels) Red: 20m
7273
❋Voltage test leads
3,000mm 7275
❋Printer Cable
2,000mm 7276
❋Extension leads adaptor
400mm
Applicable model Applicable model Applicable model
5050 6205 6205
ACCESSORIES
Plug f4
7277
❋Mains Lead
1,440mm 7278
❋Earth Cable
1,500mm 8216
❋Temperature probe
1,000mm
Applicable model Applicable model Applicable model
6205 5050 1011
2046R
2056R
• -50°C - 300°C
80
ACCESSORIES
8405
❋Temperature probe
1,400mm 8406
❋Temperature probe
1,380mm 8407
❋Temperature probe
1,540mm
Applicable model Applicable model Applicable model
1051 1061 1051 1061 1051 1061
1052 1062 1052 1062 1052 1062
• -40°C - 500°C, Surface type, • -40°C - 500°C, Surface type • -40°C - 700°C, Liquid,
Point material: Ceramic Semi-solid
8408
❋Temperature probe
1,540mm KAMP10 1,500mm AU UK
Applicable model ❋Test lead with IEC connector Applicable model
1051 1061 6010B
1052 1062 6011A
AU : Australian plug
UK : British plug (13A)
EU : European SHUKO plug
SA : South african plug
Plug f4 Plug
8901
Fuse [0.5A/250V]
8918
Ceramic fuse [0.8A/600V]
8919
Ceramic fuse [10A/600V]
Applicable model Applicable model Applicable model
1109S 1011 1009
1012 1011
1012
1021R
8923
Fuse [0.5A/600V]
8926
Fuse [440mA/1000V]
8927
Fuse [10A/1000V]
Applicable model Applicable model Applicable model
1009 1051 1051
1110 1052 1052
2608A 1061 1061
3005A 1062 1062
3007A
3021
3022
ACCESSORIES
3023
3131A
3132A
8312
8928
Fuse [10A/250V]
Applicable model
6205
www.kew-ltd.co.jp 81
GLOSSARY
Accuracy Diode Test
The accuracy of a digital tester is defined as the difference A function to apply a diode or a transistor a constant current
between the reading and the true value for a quantity measured having a value needed to turn it on in order to check the diode's
in reference conditions. Accuracy is specified in the format: or the transistor's forward voltage drop and identifying the
(±xx% rdg ±xx dgt) connection direction of the device.
A function of a tester to automatically select the appropriate With this technique, stable measurements can be taken with
measuring range based on the input signal. high accuracy, resolution and noise rejection ratio. One
particular advantage is high noise rejection ratio at 50 or 60Hz
power line frequency.
Average Value
The average of an AC waveform's instantaneous values taken Effective Measuring Range of Insulation Tester
over a half cycle. Ordinary testers respond to the average value.
The measuring range for which the accuracy of an insulation
For sinusoidal wave : tester is guaranteed. There are two kinds of effective measuring
Average value = Maximum value × 2/π= Maximum value × 0.637 ranges: the first and second effective measuring ranges.
When the true RMS value is 100V ; First effective measuring range
Average value= Maximum value × 2/π=141 × 0.637 = 90(V) From 1/1000 to 1/2 the maximum effective scale value
The reading of ordinary testers is calibrated in terms of the (When there is no major scale division for 1/2 the maximum
effective value of a sinusoidal wave even though they are effective scale value, the nearest major scale division is used.)
responding to the average value. They are called average- (except for 3431, 3021A series)
responding-RMS-calibrated type of testers. As opposed to
these, true-RMS type testers respond and show the true RMS Second effective measuring range
value. Scales divisions not included in the first effective measuring range
For example for a 500V/100MΩ insulation tester;
First effective measuring range: 0.1-50MΩ(±5% of indicated
Crest Factor value)
Second effective measuring range: 50-100MΩ(±10% of
The ratio of the maximum value to the effective value. indicated value)
It represents the range of input in which a tester maintains linear
operation, expressed by a multiple of the full scale value of the
range being used. Form Factor
Crest factor = Maximum value/True RMS value
For sinusoidal wave; The ratio of the effective value to the average value.
Crest factor = 141/100 = 1.41 Form factor = Effective value/Average value
tester. of frequencies.
AC signals to measure with a tester can be of one frequency
or from a wide frequency band ranging from low to high
Decibel: dB frequencies. To measure these frequencies, it is better to use a
tester having a wide frequency response range.
A unit used to express the magnitude of change in level of
electric signal or sound intensity.
A voltage ratio of 1 to 10 is equal to -20dB, 10 to 1 to 20dB, Hall Element
100 to 1 to 40dB and 1000 to 1 to 60dB. A power ratio of 10 to
1 is not 20dB, but 10dB, since power(P) is proportional to the When a current-carrying conductor is placed in a magnetic field
square of voltage(V). so that the direction of the magnetic field is perpendicular
82
GLOSSARY
to the direction of the current flow, voltage is developed in the Sensitivity
direction perpendicular to both the magnetic field and the cur-
rent flow. This is called the Hall effect and the Hall element is a The ability of a tester to respond to the quantity to measure,
device that utilizes the effect. expressed as the ratio of a change induced in the reading to a
Kyoritsu AC/DC clamp meters and clamp sensors employ the change in the input:
Hall element.
Change in reading
Sensitivity =
Change in quantity to measure
Harmonics
Power line AC voltage from a utility company has near sinu- Shock Hazard
soidal waveform of fundamental frequency with little distor-
tion. When only a load consisting of resisters, capacitors and Also referred to as electric shock. When a person touches a
coils, called a linear load (its constant is fixed regardless of the motor that has a "leak", a path can be created from the motor
amount of current flowing through it), is connected to mains frame to the hand, body and feet of the person to the floor he
supply, no distortion is introduced into the load current wave- is standing on to allow a current to flow through it, sometimes
form. However, when a non-linear load, such as a semiconduc- resulting in a fatal accident.
tor and a saturable reactor, is connected, distortion appears The seriousness of a shock hazard widely varies depending on
in the load current waveform. The current with a waveform the amount and duration of the current that flows through the
containing distortion, or harmonic current, flows in the direction person' s body. His constitution, age and medical condition
toward the low impedance side and in the process, produces are also variation factors, but in general, at a frequency of 50
voltage drop over the impedance of the current path, causing or 60Hz, stimulus to the skin is felt at 1mA, considerable pain
the load voltage also to contain harmonics. occurs at 5mA, pain is unbearable at 10mA, there is difficulty
in releasing the "leaking" object because of intense muscle
contraction at 20mA, it is considerably dangerous at 50mA and
Indicated Value fatality is likely at 100mA. For the safety limit for a fatal current,
which causes ventricular fibrillation, Professor Dalziel proposed
The value indicated by a tester for a measured quantity the following equation from numbers of experiments on animals.
I = 165 t
Where, I = current (mA) and t = time (sec).
Peak Hold From this theory, the maximum duration for a current of 165mA
is 1 second.
A function to memorize the peak value over a certain period of
time.
*Response time is normally approx. 10ms. Thermocouple
Reading in the peak hold mode are two types. (the peak of cur-
rent crest value and the peak current value multiplies by 1/ 2 ) A device that uses the voltage developed by the junction of two
dissimilar metals to measure temperature. One junction, called
the measuring junction, is placed at the point where tempera-
Peak Value ture is to be measured. The other junction, called the reference
junction, is maintained at a reference temperature. The voltage
The value at a point where a waveform has the maximum amplitude. developed between the two junctions varies depending on the
difference between the temperatures of the two junctions and
the type of thermocouple.
Resolution
The minimum increments in which a tester can take measurements. True RMS Value
The square root of the average of the square of a periodic wave-
Sample Rate form's instantaneous values taken over one cycle. It is also
called the rms value and the most closely relates to such form
Frequency at which an A/D converter circuit senses the quantity of energy as force and heat.
to measure: typically, twice or three times per second. (The effective value of an alternating current is expressed as the
value of the direct current which produces the same amount of
heat as the alternation current does.)
Measurement categories
To ensure safe operation of measuring instruments, IEC 61010 establishes safety stan-
dards for various electrical environments, categorized as O to CAT 4, and called measure-
ment categories. Higher-numbered categories correspond to electrical environments with Interior wiring
O: Device which is
greater momentary energy, so a measuring instrument designed for CAT 3 environments Incoming wire not directly
can endure greater momentary energy than one designed for CAT 2. connected to the
main power supply
O : Circuits which are not directly connected to the mains power supply.
CAT 2 : Electrical circuits of equipment connected to an AC electrical outlet by a power cord.
CAT 3 : Primary electrical circuits of the equipment connected directly to the distribution Socket
panel, and feeders from the distribution panel to outlets.
CAT 4 : The circuit from the service drop to the service entrance, and to the power meter and
primary overcurrent protection device (distribution panel).
www.kew-ltd.co.jp 83
PRODUCT INDEX
1000 3124 High Voltage Insulation Tester 39
1009 Digital Multimeter 11 3125A High Voltage Insulation Tester 35
1011 Digital Multimeter 11 3127 High Voltage Insulation Tester 36
1012 Digital Multimeter 11 3128 High Voltage Insulation Tester 37
1018 Digital Multimeter (Soft case type) 12 3431 Analogue Insulation Tester 33
1018H Digital Multimeter (Hard case type) 12
1019R Digital Multimeter 12 4000
1020R Digital Multimeter 10 4102A Earth Tester (Soft case model) 43
1021R Digital Multimeter 10 4102A-H Earth Tester (Hard case model) 43
1030 Digital Multimeter (Pen type) 12 4105A Earth Tester (Soft case model) 43
1051 Digital Multimeter 14 4105A-H Earth Tester (Hard case model) 43
1052 Digital Multimeter 14 4105DL Earth Tester (Cable reel set model) 42
1061 Digital Multimeter 14 4105DL-H Earth Tester (Hard case model) 42
1062 Digital Multimeter 14 4106 Earth Tester 44
1109S Analogue Multimeter 11 4200 Earth Clamp Tester 45
1110 Analogue Multimeter 11 4202 Earth Clamp Tester 45
4300 Simplified Earth Tester 44
2000 4118A LOOP/PSC Tester 46
2000 Digital Multimeter 13 4140 LOOP/PFC/PSC Tester 47
2001 Digital Multimeter 13
2002PA Digital Clamp Meter 19 5000
2002R Digital Clamp Meter 19 5010 AC Current Logger 64
2003A Digital Clamp Meter 22 5020 AC Current/Voltage Logger 64
2007R Digital Clamp Meter 19 5050 Ior Logger 66
2009R Digital Clamp Meter 22 5050-00 5050 67
2010 Digital Clamp Meter 22 5050-01 5050-00 + 8178 × 1 67
2012R Digital Multimeter 13 5050-02 5050-00 + 8177 × 1 67
2031 Digital Clamp Meter 20 5201 Digital Illuminometer 71
2033 Digital Clamp Meter 23 5202 Digital Light Meter 71
2046R Digital Clamp Meter 23 5406A RCD Tester 48
2055 Digital Clamp Meter 23 5410 RCD Tester 48
2056R Digital Clamp Meter 23 5510 Infrared Thermometer 72
2117R Digital Clamp Meter 20 5711 Voltage Detector 72
2127R Digital Clamp Meter 20
2200 Digital Clamp Meter 21 6000
2200R Digital Clamp Meter 21 6010B Multi Function Tester 52
2204R Digital Clamp Meter 21 6011A Multi Function Tester 53
2210R Digital Clamp Meter 21 6016 Multi Function Tester 54
2300R Fork Current Tester 26 6018 Multi Function Tester 51
2413F Leakage Clamp Meter 26 6024PV PV Insulation Earth Tester 56
2413R Leakage Clamp Meter 26 6201A Portable Appliance Tester 50
2431 Leakage Clamp Meter 25 6205 Portable Appliance Tester 49
2432 Leakage Clamp Meter 25 6305 Power Meter 60
2433 Leakage Clamp Meter 25 6305-01 6305 + 8125 × 3 + 9125 61
2433R Leakage Clamp Meter 25 6305-03 6305 + 8130 × 3 + 9135 61
2434 Leakage Clamp Meter 26 6315 Power Meter 62
2500 DC Milliamp Clamp Meter 24 6315-01 6315 + 8125 × 3 + 9125 63
2510 DC Milliamp Clamp Logger 24 6315-03 6315 + 8130 × 3 + 9135 63
2608A Analogue Clamp Meter 19
7000
3000 Test leads 33,76
PRODUCT INDEX
7025
3005A Digital Insulation/Continuity Tester 30 7066A Test leads 10,11,19,20,23,74,76
3007A Digital Insulation/Continuity Tester 30 7073 2WAY Output cord 26,76
3021A Digital Insulation/Continuity Tester 31 7082 Leads for recorder 39,76
3022A Digital Insulation/Continuity Tester 31 7083 Leads for battery charging 39,76
3023A Digital Insulation/Continuity Tester 31 7084 Earth and guard leads 39,76
3131A Analogue Insulation/Continuity Tester 32 7095A Earth resistance test leads 43,51,76
3132A Analogue Insulation/Continuity Tester 32 7100A Precision measurement cord set 43,51,76
3161A Analogue Insulation Tester 33 7103A Test leads with remote control switch 31,51,76
3165 Analogue Insulation Tester 33 7107A Test leads 19,21,22,76
3166 Analogue Insulation Tester 33 7115 Extension probe 31,51,76
3025A High Voltage Insulation Tester 35 7116 Extension probe 33,76
3121B High Voltage Insulation Tester 34 7121B Distribution board test leads 46,48,50,76
3122B High Voltage Insulation Tester 34 7122B Test leads 30,32,52,53,76
3123A High Voltage Insulation Tester 38 7123 Molded plug test lead [AU] 46,48,50,76
84
PRODUCT INDEX
7124 Molded plug test lead [UK] 46,48,76 7271 Earth resistance test leads (Green) 42,80
7125 Molded plug test lead [EU] 46,48,76 7272 Precision measurement Cord set 42,80
7126 Molded plug test lead [SA] 46,48,76 7273 Voltage test lead 66,67,80
7127A Simplified measurement probe 43,77 7275 Printer cable 49,80
7127B Simplified measurement probe 42,77 7276 Adaptor for Extension cord 49,80
7128A Test leads 48,77 7277 Mains lead 49,80
7129A Test lead with alligator clip 48,49,50,77 7278 Earth cable 66,67,80
7131B Safety crocodile clip [black] 31,51
7132A(KSLP5) External earth probe 53,77 8000
7133B(OMA DIEC) Distribution board test leads 52,53,77 8016 Hook type prod 31,33,51,56,57
7139A Test leads with remote control switch 76 8017 Extension prod 31,44,48,51,56,57
7140 Adaptor for extension cord 50,77 8017A Extension prod long 33
7141B Voltage test lead set 60,62,77 8019 Hook type prod 34-36,38
7146 Banana φ4 adjuster plug 15,69,70,77 8022 AC adaptor [110V] 22
7148 USB cable 60,64 8023 AC adaptor [220V] 22
7149A Test leads with remote control switch set 33,77 8029 Extension prod 37
7150A Test leads with remote control switch set 31,77 8030 Phase indicator 73
7153B Safety test leads 77 8031 Phase indicator 73
7154B Safety test leads 77 8031F Phase indicator 73
7155B Safety test leads with fuse 77 8032 Auxiliary earth spikes [2spikes/1set] 43,44,51,55,76,79
7156B Safety test leads with fuse 77 8035 Non-contact Phase Indicator 73
7157B Safety crocodile clips 78 8041 Auxiliary earth spikes [2spikes/1set] 42,80
7158B Safety crocodile clips for fuse 78 8072 CAT Ⅱ Standard prod 44,56,57
7159B Safety test leads with fuse 78 8075 Battery charger [120V] 39
7161A Flat test prod [black] 31,49-51 8080A Battery charger [220V] 39
7165A Line probe 34-36,38,78 8112 AC Clamp Adaptor 27
7168A Line probe with alligator clip 34-36,38,78 8112BNC AC Clamp Adaptor 27
7170 Power cord 37,60,62,78 8115 Clamp Sensor 10,15,27
7185 Extension cable 64,68-70,78 8121 Load current Clamp Sensor 15,64,66,68,70
7187A Main test lead [UK] 47,55,78 8122 Load current Clamp Sensor 15,64,66,68,70
7188A Distribution board fused test leads 55,78 8123 Load current Clamp Sensor 15,64,66,68,70
7196A Test leads with remote control switch 55-57,78 8124 Load current Clamp Sensor 60-63,66,68,69
7199 Output cable 69,78 8125 Load current Clamp Sensor 60-63,66,68,69
7217A Test leads 32,76 8126 Load current Clamp Sensor 60-63,66,68,69
7218A Main test lead [EU] 47,55,78 8127 Load current Clamp Sensor 60-63,66,68,69
7219 USB cable 62,66,67,78 8128 Load current Clamp Sensor 60-63,66,68,69
7220A Test leads 14,78 8129 Flexible Clamp Sensor 60-64,66,68,69
7221A Main test lead [SA] 47,55,78 8130 Flexible Clamp Sensor 60-63,66,68,69
7222A Main test lead [AU] 47,55,78 8141 Leakage current Clamp Sensor 66,68,70
7224A Earth cord 36-38,78 8142 Leakage current Clamp Sensor 66,68,70
7225A Guard cord 36-38,78 8143 Leakage current Clamp Sensor 66,68,70
7226A Line probe 37,79 8146 Leakage & Load current Clamp Sensor 15,62-64,66,68,70
7227A Line probe with alligator clip 37,79 8147 Leakage & Load current Clamp Sensor 15,62-64,66,68,70
7228A Earth resistance test leads 55,79 8148 Leakage & Load current Clamp Sensor 15,62-64,66,68,70
7229A Earth resistance test leads 44,79 8161 Clamp Sensor 10,27
7234 Alligator clip 10,11,15,79 8177 Ior Leakage current Clamp Sensor 66-68
7238A Simplified measurement test leads 44,79 8178 Ior Leakage current Clamp Sensor 66-68
7243 L-shaped probe 33,56,57,79 8200-03 Cord reel [3pcs] 43,51,76,79
7244A Alligator clip 56,57,79 8200-04 Cord reel [4pcs] 44
7245A Precision measurement cord set 56,57,79 8201 Output plug 19,22
Distribution board test lead 47,79 8212-RS232C RS232C adaptor with “KEW Report(Software)” 44,52,55
PRODUCT INDEX
7246
7247 Distribution board test lead 47,79 8212-USB USB adaptor with “KEW Report(Software)” 37,44,52,55-57
7248 Test leads 44,79 8212-USB-W USB adaptor with “KEW Windows(Software)” 37
7253 Longer line probe with alligator clip 34-36,38,79 8216 Temperature probe 11,23,80
7254 Longer line probe with alligator clip 37,79 8241 USB Communication set 15
7256 Output cord 19,22,24,79 8247 Thermal paper for printer 15
7260 Test lead with remote control switch set 33,79 8253 CAT Ⅲ Standard prod 44
7261 Test lead with Alligator clip 33,79 8255 CAT Ⅳ Standard prod 37
7264 Earth cord 34,35,80 8258 USB communication set 36
7265 Guard cord 34,35,80 8259 Adapter for measurement terminal 42,43
7266 Earth resistance test leads 42,80 8262 AC adapter 66,67
7267 Cable reel for Earth resistance tester (Red) 42,80 8263-USB USB cable with “KEW Report(Software)” 49
7268 Cable reel for Earth resistance tester (Yellow) 42,80 8302 Adaptor for recorder 35,36
7269 Earth resistance test lead (Red) 80 8304 Resister for operation check 45
7270 Earth resistance test lead (Yellow) 80 8309 Voltage sensor 64,68
www.kew-ltd.co.jp 85
PRODUCT INDEX
8312 Power supply adaptor 60,61,63,68 9173 Carrying case 33
8320 AC adaptor 24,64,68 9174 Carrying case 21
8324 Adaptor for recorder 34,38 9176 Carrying case [Hard] 39
8326-02 SD card [2GB] 60,62,66,67 9180 Carrying case [Hard] 35
8327EU Power adaptor 15V/1A 36 9181 Carrying case [Hard] 35
8329 Power supply adaptor 66-68 9182 Carrying case [Hard] 34
8405 Temperature probe 15,81 9183 Carrying case [Hard] 34
8406 Temperature probe 15,81 9188 Hard case 12
8407 Temperature probe 15,81 9189 Magnet hanger strap 10
8408 Temperature probe 15,81 9190 Carrying case 42
8901 Fuse [0.5A/250V] 11,81 9191 Hard case 42
8918 Ceramic fuse [0.8A/600V] 11,81 9192 Carrying case for cord reels 42,80
8919 Ceramic fuse [10A/600V] 10,11,81 9193 Carrying case 49
8923 Fuse [500mA/600V] 11,19,30-32,61,67,68,81 KAMP10 Test lead with IEC connector 52,53,81
8926 Fuse [440mA/1000V] 14,81 KT170 Voltage Tester 75
8927 Fuse [10A/1000V] 14,81 KT171 Voltage Tester 75
8928 Fuse [10A/250V] 49,81 KT200 Digital Clamp Meter 74
KT203 Digital Clamp Meter 74
9000 KTA01 4mm metal tips [2pcs/set] 75
9014 Cord case 55 KTA02 4mm rubber caps [2pcs/set] 75
9029 Carrying case 73 Ni-Cd rechargeable battery 39
9057 Carrying case 27
9070 Carrying case 73
9071 Carrying case 22
9074 Cord case 30,32,33
9079 Carrying case 19,20
9084 Soft case 43
9089 Carrying case 31
9090 Carrying case 20,23,25
9091 Carrying case for cord reels 43,51,76
9092 Cord case 51-53
9094 Carrying case 19,22,23,26,68-70,73
9095 Carrying case 11,27,68-70
9096 Carrying case 24,73
9097 Carrying case 10,19,25,26
9103 Carrying case 11
9105 Carrying case 74
9107 Soft case 13
9113 Carrying case 26
9114 Carrying case [Hard] 12
9115 Carrying case [Soft] 12
9118 Carrying case [Soft] 64
9120 Cord case 31
9121 Shoulder strap 30-33,42-44,46,48-51,53,55
9123 Shoulder strap 33
9125 Carrying case 44,60-63,66,67
9130 Carrying case 12
9132 Carrying case with magnet 60,61,63,68
9135 Carrying case 61,63,64,68
9137 Carrying case 69
Carrying case 55,79
PRODUCT INDEX
9142
9147 Cord case 46,48,50
9148 Shoulder strap 52
9154 Carrying case 15
9155 Shoulder strap 47,56
9156 Soft case 47,56,57
9158 Carrying case [Hard] 38
9160 Carrying case 21
9161 Carrying case 44
9164 Carrying case [Hard] 43
9165 Carrying case [Hard] 43
9166 Carrying case [Hard] 45
9167 Carrying case [Hard] 45
9168 Carrying case 11
9171 Carrying case [Hard] 36
86
QUALITY CONTROL CONCEPT
Kyoritsu started early an effort to establish system that ensures Our calibrator (standard) is calibrated at Japan Electric Meters
traceability to the national standards in order to produce reliable Inspection Corporation (JEMIC), Japan Quality Assurance Orga-
instruments as well as instruments that can assure reliability of nization (JQA) and Fluke Japan who perform calibration based
other equipment and installations. on the units established and maintained by National Institute of
Advanced Industrial Science and Technology (AIST). The stan-
When traceability is in place, measurements taken with an in- dard is used as the in-house standard to calibrate all the test
strument any time and anywhere in any situation can be related and measuring equipments which are used in-house.
to the appropriate national measurement standards through a
clear and unbroken chain of comparisons. Voltage : Precision calibrators are used as in-house DC and
AC voltage standards.
For example, in terms on measurement defined by JIS (Japa- Current : DC or AC current is converted to a voltage by a
nese Industrial Standards), traceability is specified as a condi- standard resistor, and the voltage is calibrated
tion in which a calibration path is established from instruments with a precision digital multimeter.
produced or in-house standards to higher level standards to the Resistance : Calibration resisters are calibrated with a DC stan-
national standards. Kyoritsu currently has a system in place as dard current generator and the precision digital
shown in the figure below. multimeter.
Standard resisters
CE Marking:signifies conformance to
EMC directive (2014/30/EU)
LVD directive (2014/35/EU)
RoHS directive (2011/65/EU)
www.kew-ltd.co.jp 87
KYORITSU GLOBAL NETWORK
Japan
Italy
U.K.
China
Thailand
Singapore
Headquarters
Affiliates
Please read the "Safety Warnings" in the instruction manual supplied with the instrument thoroughly and completely
Safety Warnings : for correct use. Failure to follow the safety rules can cause fire, trouble, electrical shock, etc. Therefore, make sure
to operate the instrument on a correct power supply and voltage rating marked on each instrument.
In consideration of the environment, soy ink and recycled paper were used in this publication. The contents of this leaflet are subject to change without notice. GeneCata17-18_1E Nov. 17 AD