Professional Documents
Culture Documents
Drying and Curing Time: Technical Data Sheet Jotaprime 500
Drying and Curing Time: Technical Data Sheet Jotaprime 500
Jotaprime 500
Thinner/Cleaning solvent
Thinner: Jotun Thinner No. 17
For maximum overcoating intervals, refer to the Application Guide (AG) for this product.
Drying and curing times are determined under controlled temperatures and relative humidity below 85 %, and
at average of the DFT range for the product.
Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.
Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.
Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.
Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.
Pot life 1h
Heat resistance
Temperature
Continuous Peak