1423 SHDSL Router

The 1423 SHDSL Router is a professional state-of-the-art multi-

port router with built-in SHDSL line interface offering symmetric
full-duplex transmission up to 2.3 Mbps over a single two-wire
unconditioned unshielded twisted-pair cable.

1423 ROUTER
The line speed can be automatically adapted
to optimize the throughput as a function of
100 Base-T

ATM
DSL AM

the characteristics of the local loop. To achieve

1423
SHDSL Rou ter
100 Base-T DSL AM

even higher speeds (up to 4.6 Mbps) or a longer 1423

SHDSL Rou ter
100 Base-T

reach, a 2-line pair version is also available. 100 Base-T

1423
SHDSL Rou ter
1423
ISDN SHDSL Rou ter

The basic unit features one DSL interface, and Webse rver

one or multiple independent 10/100 Base-T

In combination with DSLAM
connections. The latter one can be used for
creating a DMZ (Demilitarised Zone) or for
backup purposes. FEATURES AND BENEFITS
• Feature-rich multi-port router with built-in
Addional models offer the possibility for securing SHDSL line interface
the DSL connection using up to two Basic Rate • 1 or 2 SHDSL line pairs (up to 2.3 or 4.6 Mbps)
ISDN connections (Four B channels). • Built-in 4-port 10/100 Base-T Ethernet switch
All 1423 SHDSL Routers can be used as • Second independent Ethernet Interface for
CPE in combination with any OneAccess or creation of DMZ or back-up
third-party DSLAM (Digital Subscriber Line • Optional ISDN back-up for securing the DSL line
Access Multiplexer), and in point-to-point • For use in point-to-point configurations or in
configurations. combination with a DSLAM
• Support for advanced services based on VPN
Additionaly the 1423 SHDSL Router can also and VLANs
be used in combination with traditional TDM, • Advanced QoS mechanisms for supporting
Frame Relay or PPP based access networks. VoIP traffic
• Fully manageable with a variety of tools
Fully supported by the TDRE (Total Dynamic
Routing Engine), the unit supports advanced
features such as IP Quality of Service, IP Virtual
Private Networks and support for VLANs. With
a routing performance of up to 90 kpps, the
1423 SHDSL Router is capable to handle any
type of multimedia or delay-sensitive traffic.
This makes the 1423 SHDSL Router the ideal
access device for connecting business users,
offering secured managed IP services at the
highest possible speeds.

The equipment supports different management

interfaces on different levels of network.

All right reserved © OneAccess Networks

Technical 1423 SHDSL Router

1423 SHDSL Router Model 1423 SHDSL 2ETH-4P Router Model 1423 SHDSL 2ETH-4P ISDN Router Model

LAN WAN LAN WAN

LAN WAN
ISDN S0
4x 10/100 Base-T 4x 10/100 Base-T
10/100 Base-T SHDSL (1/2 pair) ISDN S0
SHDSL (1/2pair)
1423 10/100 Base-T 1423 SHDSL (1/2 pair)
10/100 Base-T 1423

1423 ROUTER SPECIFICATIONS

Line Interface BRI interface (on selected models only)
• Applicable standards: ITU-T G.991.2, G.994 • PPP WAN encapsulation
• Single pair or two pair line access • Connector: RJ45 S0 DTE
• Connector: RJ12/RJ45 • Applicable standards: I.420, I.412, I.430, I.440 (= Q.920), I.441 (=
• Impedance: 135 Ohm Q.921), I.450 (= Q.930), I.451 (= Q.931)
• Coding: TC PAM, compliant ITU-T G.991.2 Annex A&B • Number of interfaces: 2
(G.SHDSL), ETSI TS 101524
• Line speeds: Control interface
- Single pair: N x 64 kbps (N = 1 … 36) • Applicable standards: ITU-T V.24, V.28, EIA/TIA 574
- Two pair: N x 128 kbps (N = 1 … 36) • DCE signals: RXD, TXD, SGND
• Handshaking: compliant G.994.1 (automatic speed negotiation) • Connector: female DB9
or fixed speed
• Handshaking: compliant G.994.1 (automatic speed negotiation) Supported DSL Encapsulation Protocols
or fixed speed • ATM
• Performance monitoring: compliant G.826 (errored seconds, • Frame Relay
severely errored seconds, unavailability seconds) • PPP
• HDLC
Ideal maximum distance (noise free) on a single pair
1p line 2p line 0.4 mm 0.5 mm 0.6 mm 0.8 mm 1.0 mm 1.2 mm IP Routing
speed speed 26AWG 24AWG 20AWG 18AWG • Conform TDRE 12.0 (Total Dynamic Routing Engine)
(kbps) (kbps) (km) (km) (km) (km) (km) (km)
Routing and Bridging Performance
64 128 11.0 15.1 21.5 27.2 38.2 42.4
• Routing performance: 60.000 / 85.000 pps*
128 256 8.0 11.0 15.6 19.8 27.8 30.8 • Bridging performance: 75.000 / 110.000 pps*
• Routing and bridging performance: 50 / 90 kpps*
256 512 8.2 11.3 16.0 20.3 28.5 31.6 • Supported number of Frame-Relay DLCIs: 200
512 1024 7.2 9.9 14.0 17.8 25.0 27.7 (on HWA models)
• Supported number of ATM PVCs: 31
1024 2048 5.5 7.6 10.7 13.6 19.1 21.2 • Supported number of IP VPN tunnels: 25
1536 3072 4.0 5.5 7.8 9.9 13.9 15.4 • Supported number of VLANs: 200
• Supported number of bridge-groups: 13

1221Router_en_250707 - Operational Marketing Department - OneAccess reserves the right to change the technical caracteristics described in this document without prior notice - Printed in Belgium.
2048 4096 4.2 5.8 8.2 10.4 14.6 16.2

2304 4608 4.0 5.5 7.8 9.9 13.9 15.4

* Highest value for versions with hardware accelerator

Memory
LAN Interfaces • 16 MByte DRAM
• Compliant with IEEE 802.3 10 Mbps HDX/FDX Ethernet • 8 MByte Flash
• Compliant with IEEE 802.3u 100 Mbps HDX/FDX Ethernet
• 10/100 Mbps auto-sense Maintenance and management support
• Auto cross-over • Conform TDRE (Total Dynamic Routing Engine)
• RJ45 Unshielded Twisted Pair (UTP) • Reset button for reloading default configuration
• Number of interfaces: 1+4
Front Panel Indications
• PWR: Power
Integrated VLAN switch (on selected models) • LINE / LNK1: first line pair status
• Number of ports: 4 • LINE / LNK2: second line pair status (on 2 pair versions only)
• VLAN tagging per port • LINE / ACT: WAN encapsulation protocol status (DSL or ISDN)
• Tagged, untagged or trunking VLAN operation • LINE / BACKUP: ISDN status (only on ISDN models)
• Maximum total number of VLANs: 16 • LAN1 / 1.4: LAN status on Ethernet switch
• LAN2: LAN status of second Ethernet port

Sales Code Mechanical Data

• Dimensions: 45 x 220 x 135 mm, Weight: 500 g
>195280 1423 SHDSL 230VAC
>195284 1423 SHDSL-2P 230VAC Power Requirements
>188493 1423 SHDSL 2ETH-4P 230VAC • Input voltage: 12 Vdc, 1 A
>188500 1423 SHDSL-2P 2ETH-4P 230VAC
• Power ON/OFF switch
• External power adapters available for 24 Vdc and -48 Vdc, 115 Vac and
>188495 1423 SHDSL 2ETH-4P HWA 230VAC 230 Vac
>188503 1423 SHDSL-2P 2ETH-4P HWA 230VAC • Power consumption: max 6,5 - 9,5 W depending on version
>188498 1423 SHDSL 2ETH-4P ISDN HWA 230VAC
>188507 1423 SHDSL-2P 2ETH-4P ISDN HWA 230VAC

Units without external power module and separate power adapters

can be found in the sales codes quick reference

http://www.oneaccess-net.com
[email protected]