Scribd Logo
Upload

Welcome to Scribd!

  • Real Time Kinematic (RTK) Survey Using Hemisphere S321

    Uploaded by

    Shafiqul Hasan
    63 views22 pages
    This document provides step-by-step instructions for setting up and performing an RTK survey using a Hemisphere S321 receiver. It details the processes for base setup, including establishing the base location, configuring job settings, and initializing the base station. It also outlines the rover setup, such as configuring the rover job settings, equipment, and radio link to connect to the base station. Finally, it discusses collecting point data and exporting the results.

    Original Description:

    Original Title

    Training_RTK_Survey.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides step-by-step instructions for setting up and performing an RTK survey using a Hemisphere S321 receiver. It details the processes for base setup, including establishing the base location, configuring job settings, and initializing the base station. It also outlines the rover setup, such as configuring the rover job settings, equipment, and radio link to connect to the base station. Finally, it discusses collecting point data and exporting the results.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    63 views22 pages

    Real Time Kinematic (RTK) Survey Using Hemisphere S321

    Uploaded by

    Shafiqul Hasan
    This document provides step-by-step instructions for setting up and performing an RTK survey using a Hemisphere S321 receiver. It details the processes for base setup, including establishing the base location, configuring job settings, and initializing the base station. It also outlines the rover setup, such as configuring the rover job settings, equipment, and radio link to connect to the base station. Finally, it discusses collecting point data and exporting the results.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 22

    REAL TIME KINEMATIC (RTK) SURVEY

    USING
    HEMISPHERE S321

    Ganesh Chandra Roy


    Asstt. Director (Survey) (Rtd.)
    Survey of Bangladesh
    BASE SETUP

     Put a tripod on a location with


    known coordinates (Recommended)
    or unknown coordinates
     Set a tribrach on the tripod and
    carryout centering and levelling
     Set the receiver on the tripod using
    40 cm supporting pole
     Connect external radio-link
     Power on the receiver and power
    on controller

    2
    JOB SETTINGS

     Tap to ‘File’
     Tap to ‘Job’
     Write Job Name
     Tap to ‘Job Settings’ and
    set coordinate system

    3
    JOB SETTINGS

     Tap to ‘System’
     Select Distance: Metre’
    Lat/Lon: Degrees, Minutes,
    Seconds
     Tap to ‘Edit Projection List’

    4
    JOB SETTINGS

     Write System Name


     Select Projection
     Input Scale Factor, Central
    Meridian, Zone Width, Lat.
    Of Origin, False Northing
    and False Easting

    5
    BASE SETUP

     Tap to ‘Equip’
     Tap to ‘GPS Base’
     Tap to ‘Comms’
     Select Type: Bluetooth

     Tap to ‘Hammer & Rench’

     Select the device from the


    list

    6
    BASE SETUP

     Tap to ‘Receiver’

     Select Antenna Type from


    the list

     Input Antenna Height,


    Elevation Mask, etc.

    7
    BASE SETUP

     Tap to ‘RTK’

     Select Device
    from the list

    8
    BASE SETUP

     Tap to ‘Enter Lat/Lon’ if the


    geographical coordinates
    of the base point is known
    or
     Tap to ‘Enter Grid System
    Coordinates’ if the grid
    coordinates of the point is
    known
    or
     Tap to ‘Read From GPS’ if
    the coordinates of the
    base point is unwoon

    9
    BASE SETUP

     Tap to ‘Yes’

    10
    ROVER SETUP

     Set the receiver on the pole


     Connect internal radio-link
     Power on the receiver and power
    on controller

    11
    ROVER SETUP

     Tap to ‘File’
     Tap to ‘Job’
     Write Job Name
     Tap to ‘Job Settings’ and
    set coordinate system

    12
    ROVER SETUP

     Tap to ‘Equip’
     Tap to ‘GPS Rover’
     Tap to ‘Comms’
     Select Type: Bluetooth

     Tap to ‘Hammer & Rench’

     Select the device from the


    list

    13
    ROVER SETUP

     Tap to ‘Receiver’

     Select Antenna Type from


    the list

     Input Antenna Height,


    Elevation Mask, etc.

    14
    ROVER SETUP

     Tap to ‘RTK’

     Select Device: Internal


    UHF

    15
    ROVER SETUP

     Select Protocol ‘Satel’

     Select Power: 1 Watt

     Select Channel: 3:452


    MHz (Should be same
    as base)

    16
    ROVER SETUP

     Tap to ‘Survey’

     Tap to ‘1 Store Points’

    17
    ROVER SETUP

     Check the display ‘Fixed’

     Check the ‘HRMS’ and


    ‘VRMS’

    18
    DATA EXPORT

     Tap to ‘Import/Export’

    19
    DATA EXPORT

     Tap to ‘Export Ascii


    File’

    20
    DATA EXPORT

     Select File Type:


    User Defined
     Select Coordinate
    Order|: PT_ID,
    North, East, Elev<
    Desc
     Select Delimiter:
    Comma
     Tap to √ mark

    21
    THANK YOU

    22

    You might also like